Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 49ea02c..30ff42f 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -159,6 +159,7 @@
tristate "SDHCI OF support for the ASPEED SDHCI controller"
depends on MMC_SDHCI_PLTFM
depends on OF && OF_ADDRESS
+ select MMC_SDHCI_IO_ACCESSORS
help
This selects the ASPEED Secure Digital Host Controller Interface.
@@ -170,14 +171,14 @@
config MMC_SDHCI_OF_AT91
tristate "SDHCI OF support for the Atmel SDMMC controller"
depends on MMC_SDHCI_PLTFM
- depends on OF
+ depends on OF && HAVE_CLK
help
This selects the Atmel SDMMC driver
config MMC_SDHCI_OF_ESDHC
tristate "SDHCI OF support for the Freescale eSDHC controller"
depends on MMC_SDHCI_PLTFM
- depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
+ depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
select MMC_SDHCI_IO_ACCESSORS
select FSL_GUTS
help
@@ -212,6 +213,18 @@
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+config MMC_SDHCI_OF_SPARX5
+ tristate "SDHCI OF support for the MCHP Sparx5 SoC"
+ depends on MMC_SDHCI_PLTFM
+ depends on ARCH_SPARX5 || COMPILE_TEST
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ found in the MCHP Sparx5 SoC.
+
+ If you have a Sparx5 SoC with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_CADENCE
tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
depends on MMC_SDHCI_PLTFM
@@ -225,7 +238,7 @@
config MMC_SDHCI_CNS3XXX
tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
- depends on ARCH_CNS3XXX
+ depends on ARCH_CNS3XXX || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
help
This selects the SDHCI support for CNS3xxx System-on-Chip devices.
@@ -234,9 +247,22 @@
If unsure, say N.
+config MMC_SDHCI_ESDHC_MCF
+ tristate "SDHCI support for the Freescale eSDHC ColdFire controller"
+ depends on M5441x
+ depends on MMC_SDHCI_PLTFM
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This selects the Freescale eSDHC controller support for
+ ColdFire mcf5441x devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_ESDHC_IMX
tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
select MMC_CQHCI
@@ -250,7 +276,7 @@
config MMC_SDHCI_DOVE
tristate "SDHCI support on Marvell's Dove SoC"
- depends on ARCH_DOVE || MACH_DOVE
+ depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
@@ -263,7 +289,7 @@
config MMC_SDHCI_TEGRA
tristate "SDHCI platform support for the Tegra SD/MMC Controller"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
select MMC_CQHCI
@@ -275,7 +301,8 @@
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && PLAT_SAMSUNG
+ depends on MMC_SDHCI
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
@@ -287,7 +314,7 @@
config MMC_SDHCI_SIRF
tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
- depends on ARCH_SIRF
+ depends on ARCH_SIRF || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
@@ -325,7 +352,8 @@
config MMC_SDHCI_SPEAR
tristate "SDHCI support on ST SPEAr platform"
- depends on MMC_SDHCI && PLAT_SPEAR
+ depends on MMC_SDHCI
+ depends on PLAT_SPEAR || COMPILE_TEST
depends on OF
help
This selects the Secure Digital Host Controller Interface (SDHCI)
@@ -348,7 +376,7 @@
config MMC_SDHCI_BCM_KONA
tristate "SDHCI support on Broadcom KONA platform"
- depends on ARCH_BCM_MOBILE
+ depends on ARCH_BCM_MOBILE || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
help
This selects the Broadcom Kona Secure Digital Host Controller
@@ -368,6 +396,17 @@
If unsure, say N.
+config MMC_SDHCI_MILBEAUT
+ tristate "SDHCI support for Socionext Milbeaut Serieas using F_SDH30"
+ depends on MMC_SDHCI_PLTFM
+ depends on OF
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ Needed by Milbeaut SoC for MMC / SD / SDIO support.
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_IPROC
tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
@@ -385,7 +424,8 @@
config MMC_MESON_GX
tristate "Amlogic S905/GX*/AXG SD/MMC Host Controller support"
- depends on ARCH_MESON && MMC
+ depends on ARCH_MESON|| COMPILE_TEST
+ depends on COMMON_CLK
help
This selects support for the Amlogic SD/MMC Host Controller
found on the S905/GX*/AXG family of SoCs. This controller is
@@ -393,11 +433,25 @@
If you have a controller with this interface, say Y here.
+config MMC_MESON_MX_SDHC
+ tristate "Amlogic Meson SDHC Host Controller support"
+ depends on (ARM && ARCH_MESON) || COMPILE_TEST
+ depends on COMMON_CLK
+ depends on OF
+ help
+ This selects support for the SDHC Host Controller on
+ Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs.
+ The controller supports the SD/SDIO Spec 3.x and eMMC Spec 4.5x
+ with 1, 4, and 8 bit bus widths.
+
+ If you have a controller with this interface, say Y or M here.
+ If unsure, say N.
+
config MMC_MESON_MX_SDIO
tristate "Amlogic Meson6/Meson8/Meson8b SD/MMC Host Controller support"
depends on ARCH_MESON || COMPILE_TEST
depends on COMMON_CLK
- depends on OF
+ depends on OF_ADDRESS
help
This selects support for the SD/MMC Host Controller on
Amlogic Meson6, Meson8 and Meson8b SoCs.
@@ -407,7 +461,7 @@
config MMC_MOXART
tristate "MOXART SD/MMC Host Controller support"
- depends on ARCH_MOXART && MMC
+ depends on ARCH_MOXART || COMPILE_TEST
help
This selects support for the MOXART SD/MMC Host Controller.
MOXA provides one multi-functional card reader which can
@@ -416,7 +470,7 @@
config MMC_SDHCI_ST
tristate "SDHCI support on STMicroelectronics SoC"
- depends on ARCH_STI || FSP2
+ depends on ARCH_STI || FSP2 || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
@@ -449,7 +503,7 @@
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on ISA_DMA_API
+ depends on ISA_DMA_API && !M68K
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
@@ -486,9 +540,10 @@
config MMC_SDHCI_MSM
tristate "Qualcomm SDHCI Controller Support"
- depends on ARCH_QCOM || (ARM && COMPILE_TEST)
+ depends on ARCH_QCOM || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
+ select MMC_CQHCI
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in Qualcomm SOCs. The controller supports
@@ -535,9 +590,9 @@
config MMC_MVSDIO
tristate "Marvell MMC/SD/SDIO host driver"
- depends on PLAT_ORION
+ depends on PLAT_ORION || (COMPILE_TEST && ARM)
depends on OF
- ---help---
+ help
This selects the Marvell SDIO host driver.
SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
SoC controllers.
@@ -547,7 +602,7 @@
config MMC_DAVINCI
tristate "TI DAVINCI Multimedia Card Interface support"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || COMPILE_TEST
help
This selects the TI DAVINCI Multimedia card Interface.
If you have an DAVINCI board with a Multimedia Card slot,
@@ -562,7 +617,7 @@
config MMC_SPI
tristate "MMC/SD/SDIO over SPI"
- depends on SPI_MASTER && HAS_DMA
+ depends on SPI_MASTER
select CRC7
select CRC_ITU_T
help
@@ -629,9 +684,10 @@
config MMC_SDHCI_SPRD
tristate "Spreadtrum SDIO host Controller"
- depends on ARCH_SPRD
+ depends on ARCH_SPRD || COMPILE_TEST
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
+ select MMC_HSQ
help
This selects the SDIO Host Controller in Spreadtrum
SoCs, this driver supports R11(IP version: R11P0).
@@ -645,7 +701,7 @@
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
- depends on MFD_TMIO || MFD_ASIC3
+ depends on MFD_TMIO || MFD_ASIC3 || COMPILE_TEST
select MMC_TMIO_CORE
help
This provides support for the SD/MMC cell found in TC6393XB,
@@ -736,7 +792,7 @@
config MMC_DW
tristate "Synopsys DesignWare Memory Card Interface"
- depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
+ depends on ARC || ARM || ARM64 || MIPS || RISCV || CSKY || COMPILE_TEST
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
@@ -918,7 +974,7 @@
config MMC_SUNXI
tristate "Allwinner sunxi SD/MMC Host Controller support"
- depends on ARCH_SUNXI
+ depends on ARCH_SUNXI || COMPILE_TEST
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
@@ -936,6 +992,17 @@
If unsure, say N.
+config MMC_HSQ
+ tristate "MMC Host Software Queue support"
+ help
+ This selects the MMC Host Software Queue support. This may increase
+ performance, if the host controller and its driver supports it.
+
+ If you have a controller/driver supporting this interface, say Y or M
+ here.
+
+ If unsure, say N.
+
config MMC_TOSHIBA_PCI
tristate "Toshiba Type A SD/MMC Card Interface Driver"
depends on PCI
@@ -957,6 +1024,7 @@
tristate "MediaTek SD/MMC Card Interface support"
depends on HAS_DMA
select REGULATOR
+ select MMC_CQHCI
help
This selects the MediaTek(R) Secure digital and Multimedia card Interface.
If you have a machine with a integrated SD/MMC card reader, say Y or M here.
@@ -978,6 +1046,7 @@
tristate "Broadcom SDIO/SD/MMC support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC
depends on MMC_SDHCI_PLTFM
+ select MMC_CQHCI
default y
help
This selects support for the SDIO/SD/MMC Host Controller on
@@ -998,6 +1067,7 @@
depends on MMC_SDHCI_PLTFM && OF
select THERMAL
imply TI_SOC_THERMAL
+ select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's DRA7 SOCs. The controller supports
@@ -1011,6 +1081,7 @@
tristate "Support for the SDHCI Controller in TI's AM654 SOCs"
depends on MMC_SDHCI_PLTFM && OF && REGMAP_MMIO
select MMC_SDHCI_IO_ACCESSORS
+ select MMC_CQHCI
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's AM654 SOCs. The controller supports
@@ -1019,3 +1090,14 @@
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+
+config MMC_OWL
+ tristate "Actions Semi Owl SD/MMC Host Controller support"
+ depends on HAS_DMA
+ depends on ARCH_ACTIONS || COMPILE_TEST
+ help
+ This selects support for the SD/MMC Host Controller on
+ Actions Semi Owl SoCs.
+
+config MMC_SDHCI_EXTERNAL_DMA
+ bool
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 11c4598..451c25f 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -21,6 +21,7 @@
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o
+obj-$(CONFIG_MMC_SDHCI_MILBEAUT) += sdhci-milbeaut.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_SDHCI_AM654) += sdhci_am654.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
@@ -67,12 +68,15 @@
obj-$(CONFIG_MMC_USHC) += ushc.o
obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
obj-$(CONFIG_MMC_MESON_GX) += meson-gx-mmc.o
+meson-mx-sdhc-objs := meson-mx-sdhc-clkc.o meson-mx-sdhc-mmc.o
+obj-$(CONFIG_MMC_MESON_MX_SDHC) += meson-mx-sdhc.o
obj-$(CONFIG_MMC_MESON_MX_SDIO) += meson-mx-sdio.o
obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
obj-$(CONFIG_MMC_BCM2835) += bcm2835.o
+obj-$(CONFIG_MMC_OWL) += owl-mmc.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
@@ -80,6 +84,7 @@
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
+obj-$(CONFIG_MMC_SDHCI_ESDHC_MCF) += sdhci-esdhc-mcf.o
obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o
obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o
@@ -89,6 +94,7 @@
obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC) += sdhci-of-dwcmshc.o
+obj-$(CONFIG_MMC_SDHCI_OF_SPARX5) += sdhci-of-sparx5.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o
obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
@@ -98,6 +104,7 @@
obj-$(CONFIG_MMC_SDHCI_OMAP) += sdhci-omap.o
obj-$(CONFIG_MMC_SDHCI_SPRD) += sdhci-sprd.o
obj-$(CONFIG_MMC_CQHCI) += cqhci.o
+obj-$(CONFIG_MMC_HSQ) += mmc_hsq.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c
index 026ca91..bfb8efe 100644
--- a/drivers/mmc/host/alcor.c
+++ b/drivers/mmc/host/alcor.c
@@ -1178,6 +1178,7 @@
.id_table = alcor_pci_sdmmc_ids,
.driver = {
.name = DRV_NAME_ALCOR_PCI_SDMMC,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &alcor_mmc_pm_ops
},
};
diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c
index 914e17b..e878fdf 100644
--- a/drivers/mmc/host/android-goldfish.c
+++ b/drivers/mmc/host/android-goldfish.c
@@ -27,7 +27,6 @@
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/mmc/mmc.h>
-#include <linux/mmc/sdio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -404,14 +403,6 @@
host->mrq = req;
goldfish_mmc_prepare_data(host, req);
goldfish_mmc_start_command(host, req->cmd);
-
- /*
- * This is to avoid accidentally being detected as an SDIO card
- * in mmc_attach_sdio().
- */
- if (req->cmd->opcode == SD_IO_SEND_OP_COND &&
- req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR))
- req->cmd->error = -EINVAL;
}
static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -482,6 +473,7 @@
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps2 = MMC_CAP2_NO_SDIO;
/* Use scatterlist DMA to reduce per-transfer costs.
* NOTE max_seg_size assumption that small blocks aren't
@@ -545,6 +537,7 @@
.remove = goldfish_mmc_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index c26fbe5..444bd3a 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -169,6 +169,7 @@
#define atmci_writel(port, reg, value) \
__raw_writel((value), (port)->regs + reg)
+#define ATMCI_CMD_TIMEOUT_MS 2000
#define AUTOSUSPEND_DELAY 50
#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
@@ -224,12 +225,13 @@
* @lock: Spinlock protecting the queue and associated data.
* @regs: Pointer to MMIO registers.
* @sg: Scatterlist entry currently being processed by PIO or PDC code.
+ * @sg_len: Size of the scatterlist
* @pio_offset: Offset into the current scatterlist entry.
* @buffer: Buffer used if we don't have the r/w proof capability. We
* don't have the time to switch pdc buffers so we have to use only
* one buffer for the full transaction.
* @buf_size: size of the buffer.
- * @phys_buf_addr: buffer address needed for pdc.
+ * @buf_phys_addr: buffer address needed for pdc.
* @cur_slot: The slot which is currently using the controller.
* @mrq: The request currently being processed on @cur_slot,
* or NULL if the controller is idle.
@@ -239,6 +241,7 @@
* @data_size: just data->blocks * data->blksz.
* @dma: DMA client state.
* @data_chan: DMA channel being used for the current data transfer.
+ * @dma_conf: Configuration for the DMA slave
* @cmd_status: Snapshot of SR taken upon completion of the current
* command. Only valid when EVENT_CMD_COMPLETE is pending.
* @data_status: Snapshot of SR taken upon completion of the current
@@ -583,11 +586,11 @@
debugfs_create_file("regs", S_IRUSR, root, host, &atmci_regs_fops);
debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
- debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
- debugfs_create_x32("pending_events", S_IRUSR, root,
- (u32 *)&host->pending_events);
- debugfs_create_x32("completed_events", S_IRUSR, root,
- (u32 *)&host->completed_events);
+ debugfs_create_u32("state", S_IRUSR, root, &host->state);
+ debugfs_create_xul("pending_events", S_IRUSR, root,
+ &host->pending_events);
+ debugfs_create_xul("completed_events", S_IRUSR, root,
+ &host->completed_events);
}
#if defined(CONFIG_OF)
@@ -808,6 +811,9 @@
static void atmci_send_command(struct atmel_mci *host,
struct mmc_command *cmd, u32 cmd_flags)
{
+ unsigned int timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+ ATMCI_CMD_TIMEOUT_MS;
+
WARN_ON(host->cmd);
host->cmd = cmd;
@@ -817,6 +823,8 @@
atmci_writel(host, ATMCI_ARGR, cmd->arg);
atmci_writel(host, ATMCI_CMDR, cmd_flags);
+
+ mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
}
static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
@@ -1314,8 +1322,6 @@
* prepared yet.)
*/
atmci_writel(host, ATMCI_IER, iflags);
-
- mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000));
}
static void atmci_queue_request(struct atmel_mci *host,
@@ -1557,6 +1563,8 @@
WARN_ON(host->cmd || host->data);
+ del_timer(&host->timer);
+
/*
* Update the MMC clock rate if necessary. This may be
* necessary if set_ios() is called when a different slot is
@@ -1583,8 +1591,6 @@
host->state = STATE_IDLE;
}
- del_timer(&host->timer);
-
spin_unlock(&host->lock);
mmc_request_done(prev_mmc, mrq);
spin_lock(&host->lock);
@@ -2347,8 +2353,7 @@
static int atmci_configure_dma(struct atmel_mci *host)
{
- host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev,
- "rxtx");
+ host->dma.chan = dma_request_chan(&host->pdev->dev, "rxtx");
if (PTR_ERR(host->dma.chan) == -ENODEV) {
struct mci_platform_data *pdata = host->pdev->dev.platform_data;
@@ -2413,7 +2418,7 @@
case 0x600:
case 0x500:
host->caps.has_odd_clk_div = 1;
- /* Fall through */
+ fallthrough;
case 0x400:
case 0x300:
host->caps.has_dma_conf_reg = 1;
@@ -2421,16 +2426,16 @@
host->caps.has_cfg_reg = 1;
host->caps.has_cstor_reg = 1;
host->caps.has_highspeed = 1;
- /* Fall through */
+ fallthrough;
case 0x200:
host->caps.has_rwproof = 1;
host->caps.need_blksz_mul_4 = 0;
host->caps.need_notbusy_for_read_ops = 1;
- /* Fall through */
+ fallthrough;
case 0x100:
host->caps.has_bad_data_ordering = 0;
host->caps.need_reset_after_xfer = 0;
- /* Fall through */
+ fallthrough;
case 0x0:
break;
default:
@@ -2646,7 +2651,7 @@
{
struct atmel_mci *host = dev_get_drvdata(dev);
- pinctrl_pm_select_default_state(dev);
+ pinctrl_select_default_state(dev);
return clk_prepare_enable(host->mck);
}
@@ -2663,6 +2668,7 @@
.remove = atmci_remove,
.driver = {
.name = "atmel_mci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(atmci_dt_ids),
.pm = &atmci_dev_pm_ops,
},
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index bc8aeb4..bd00515 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -259,7 +259,7 @@
au1xmmc_finish_request(host);
}
-static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
+static int au1xmmc_send_command(struct au1xmmc_host *host,
struct mmc_command *cmd, struct mmc_data *data)
{
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
@@ -302,9 +302,6 @@
__raw_writel(cmd->arg, HOST_CMDARG(host));
wmb(); /* drain writebuffer */
- if (wait)
- IRQ_OFF(host, SD_CONFIG_CR);
-
__raw_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
wmb(); /* drain writebuffer */
@@ -312,19 +309,6 @@
while (__raw_readl(HOST_CMD(host)) & SD_CMD_GO)
/* nop */;
- /* Wait for the command to come back */
- if (wait) {
- u32 status = __raw_readl(HOST_STATUS(host));
-
- while (!(status & SD_STATUS_CR))
- status = __raw_readl(HOST_STATUS(host));
-
- /* Clear the CR status */
- __raw_writel(SD_STATUS_CR, HOST_STATUS(host));
-
- IRQ_ON(host, SD_CONFIG_CR);
- }
-
return 0;
}
@@ -711,7 +695,7 @@
}
if (!ret)
- ret = au1xmmc_send_command(host, 0, mrq->cmd, mrq->data);
+ ret = au1xmmc_send_command(host, mrq->cmd, mrq->data);
if (ret) {
mrq->cmd->error = ret;
@@ -984,12 +968,9 @@
goto out2;
}
- r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!r) {
- dev_err(&pdev->dev, "no IRQ defined\n");
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq < 0)
goto out3;
- }
- host->irq = r->start;
mmc->ops = &au1xmmc_ops;
@@ -1208,6 +1189,7 @@
.resume = au1xmmc_resume,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index 148414d..8c2361e 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1280,8 +1280,7 @@
/* host controller capabilities */
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_ERASE |
- MMC_CAP_CMD23;
+ MMC_CAP_NEEDS_POLL | MMC_CAP_HW_RESET | MMC_CAP_CMD23;
spin_lock_init(&host->lock);
mutex_init(&host->mutex);
@@ -1357,7 +1356,6 @@
{
struct device *dev = &pdev->dev;
struct clk *clk;
- struct resource *iomem;
struct bcm2835_host *host;
struct mmc_host *mmc;
const __be32 *regaddr_p;
@@ -1373,8 +1371,7 @@
host->pdev = pdev;
spin_lock_init(&host->lock);
- iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->ioaddr = devm_ioremap_resource(dev, iomem);
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->ioaddr)) {
ret = PTR_ERR(host->ioaddr);
goto err;
@@ -1395,13 +1392,21 @@
host->dma_chan = NULL;
host->dma_desc = NULL;
- host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx");
+ host->dma_chan_rxtx = dma_request_chan(dev, "rx-tx");
+ if (IS_ERR(host->dma_chan_rxtx)) {
+ ret = PTR_ERR(host->dma_chan_rxtx);
+ host->dma_chan_rxtx = NULL;
+
+ if (ret == -EPROBE_DEFER)
+ goto err;
+
+ /* Ignore errors to fall back to PIO mode */
+ }
+
clk = devm_clk_get(dev, NULL);
if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "could not get clk: %d\n", ret);
+ ret = dev_err_probe(dev, PTR_ERR(clk), "could not get clk\n");
goto err;
}
@@ -1469,6 +1474,7 @@
.remove = bcm2835_remove,
.driver = {
.name = "sdhost-bcm2835",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = bcm2835_match,
},
};
diff --git a/drivers/mmc/host/cavium-octeon.c b/drivers/mmc/host/cavium-octeon.c
index 22aded1..2c4b2df 100644
--- a/drivers/mmc/host/cavium-octeon.c
+++ b/drivers/mmc/host/cavium-octeon.c
@@ -148,7 +148,6 @@
{
struct device_node *cn, *node = pdev->dev.of_node;
struct cvm_mmc_host *host;
- struct resource *res;
void __iomem *base;
int mmc_irq[9];
int i, ret = 0;
@@ -205,26 +204,16 @@
host->last_slot = -1;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "Platform resource[0] is missing\n");
- return -ENXIO;
- }
- base = devm_ioremap_resource(&pdev->dev, res);
+ base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
- host->base = (void __iomem *)base;
+ host->base = base;
host->reg_off = 0;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- dev_err(&pdev->dev, "Platform resource[1] is missing\n");
- return -EINVAL;
- }
- base = devm_ioremap_resource(&pdev->dev, res);
+ base = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(base))
return PTR_ERR(base);
- host->dma_base = (void __iomem *)base;
+ host->dma_base = base;
/*
* To keep the register addresses shared we intentionaly use
* a negative offset here, first register used on Octeon therefore
@@ -338,6 +327,7 @@
.remove = octeon_mmc_remove,
.driver = {
.name = KBUILD_MODNAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = octeon_mmc_match,
},
};
diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c
index eee08d8..76013bb 100644
--- a/drivers/mmc/host/cavium-thunderx.c
+++ b/drivers/mmc/host/cavium-thunderx.c
@@ -76,8 +76,10 @@
return ret;
host->base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
- if (!host->base)
- return -EINVAL;
+ if (!host->base) {
+ ret = -EINVAL;
+ goto error;
+ }
/* On ThunderX these are identical */
host->dma_base = host->base;
@@ -86,12 +88,14 @@
host->reg_off_dma = 0x160;
host->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(host->clk))
- return PTR_ERR(host->clk);
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ goto error;
+ }
ret = clk_prepare_enable(host->clk);
if (ret)
- return ret;
+ goto error;
host->sys_freq = clk_get_rate(host->clk);
spin_lock_init(&host->irq_handler_lock);
@@ -157,6 +161,7 @@
}
}
clk_disable_unprepare(host->clk);
+ pci_release_regions(pdev);
return ret;
}
@@ -175,6 +180,7 @@
writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
clk_disable_unprepare(host->clk);
+ pci_release_regions(pdev);
}
static const struct pci_device_id thunder_mmc_id_table[] = {
diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c
index 89deb45..c5da3aa 100644
--- a/drivers/mmc/host/cavium.c
+++ b/drivers/mmc/host/cavium.c
@@ -1038,8 +1038,7 @@
* Disable bounce buffers for max_segs = 1
*/
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD |
- MMC_CAP_3_3V_DDR;
+ MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD | MMC_CAP_3_3V_DDR;
if (host->use_sg)
mmc->max_segs = 16;
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index e33270e..e84ed84 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -10,6 +10,8 @@
#include <linux/delay.h>
#include "cb710-mmc.h"
+#define CB710_MMC_REQ_TIMEOUT_MS 2000
+
static const u8 cb710_clock_divider_log2[8] = {
/* 1, 2, 4, 8, 16, 32, 128, 512 */
0, 1, 2, 3, 4, 5, 7, 9
@@ -707,6 +709,12 @@
mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX];
mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA;
+ /*
+ * In cb710_wait_for_event() we use a fixed timeout of ~2s, hence let's
+ * inform the core about it. A future improvement should instead make
+ * use of the cmd->busy_timeout.
+ */
+ mmc->max_busy_timeout = CB710_MMC_REQ_TIMEOUT_MS;
reader = mmc_priv(mmc);
diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c
index 2d65b32..7ba4f71 100644
--- a/drivers/mmc/host/cqhci.c
+++ b/drivers/mmc/host/cqhci.c
@@ -144,7 +144,7 @@
CQHCI_DUMP(": ===========================================\n");
}
-/**
+/*
* The allocated descriptor table for task, link & transfer descritors
* looks like:
* |----------|
@@ -273,6 +273,9 @@
cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+ if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT)
+ cqhci_writel(cq_host, 0, CQHCI_CTL);
+
mmc->cqe_on = true;
if (cq_host->ops->enable)
@@ -322,14 +325,20 @@
struct cqhci_host *cq_host = mmc->cqe_private;
int err;
+ if (!card->ext_csd.cmdq_en)
+ return -EINVAL;
+
if (cq_host->enabled)
return 0;
cq_host->rca = card->rca;
err = cqhci_host_alloc_tdl(cq_host);
- if (err)
+ if (err) {
+ pr_err("%s: Failed to enable CQE, error %d\n",
+ mmc_hostname(mmc), err);
return err;
+ }
__cqhci_enable(cq_host);
@@ -370,6 +379,9 @@
else
pr_debug("%s: cqhci: CQE off\n", mmc_hostname(mmc));
+ if (cq_host->ops->post_disable)
+ cq_host->ops->post_disable(mmc);
+
mmc->cqe_on = false;
}
@@ -416,7 +428,7 @@
CQHCI_BLK_COUNT(mrq->data->blocks) |
CQHCI_BLK_ADDR((u64)mrq->data->blk_addr);
- pr_debug("%s: cqhci: tag %d task descriptor 0x016%llx\n",
+ pr_debug("%s: cqhci: tag %d task descriptor 0x%016llx\n",
mmc_hostname(mrq->host), mrq->tag, (unsigned long long)*data);
}
@@ -574,6 +586,9 @@
__cqhci_enable(cq_host);
if (!mmc->cqe_on) {
+ if (cq_host->ops->pre_enable)
+ cq_host->ops->pre_enable(mmc);
+
cqhci_writel(cq_host, 0, CQHCI_CTL);
mmc->cqe_on = true;
pr_debug("%s: cqhci: CQE on\n", mmc_hostname(mmc));
@@ -1070,7 +1085,7 @@
/* check and setup CMDQ interface */
cqhci_memres = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "cqhci_mem");
+ "cqhci");
if (!cqhci_memres) {
dev_dbg(&pdev->dev, "CMDQ not supported\n");
return ERR_PTR(-EINVAL);
diff --git a/drivers/mmc/host/cqhci.h b/drivers/mmc/host/cqhci.h
index 4377001..89bf6ad 100644
--- a/drivers/mmc/host/cqhci.h
+++ b/drivers/mmc/host/cqhci.h
@@ -206,6 +206,8 @@
void (*disable)(struct mmc_host *mmc, bool recovery);
void (*update_dcmd_desc)(struct mmc_host *mmc, struct mmc_request *mrq,
u64 *data);
+ void (*pre_enable)(struct mmc_host *mmc);
+ void (*post_disable)(struct mmc_host *mmc);
};
static inline void cqhci_writel(struct cqhci_host *host, u32 val, int reg)
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index ebfaeb3..90cd179 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -300,7 +300,7 @@
* then it's harmless for us to allow it.
*/
cmd_reg |= MMCCMD_BSYEXP;
- /* FALLTHROUGH */
+ fallthrough;
case MMC_RSP_R1: /* 48 bits, CRC */
cmd_reg |= MMCCMD_RSPFMT_R1456;
break;
@@ -996,7 +996,7 @@
if (qstatus & MMCST0_RSPDNE) {
/* End of command phase */
- end_command = (int) host->cmd;
+ end_command = host->cmd ? 1 : 0;
}
if (end_command)
@@ -1174,13 +1174,13 @@
mmc->caps |= pdata->caps;
/* Register a cd gpio, if there is not one, enable polling */
- ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
if (ret == -EPROBE_DEFER)
return ret;
else if (ret)
mmc->caps |= MMC_CAP_NEEDS_POLL;
- ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL);
+ ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0);
if (ret == -EPROBE_DEFER)
return ret;
@@ -1240,9 +1240,8 @@
pdev->id_entry = match->data;
ret = mmc_of_parse(mmc);
if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "could not parse of data: %d\n", ret);
+ dev_err_probe(&pdev->dev, ret,
+ "could not parse of data\n");
goto parse_fail;
}
} else {
@@ -1396,6 +1395,7 @@
static struct platform_driver davinci_mmcsd_driver = {
.driver = {
.name = "davinci_mmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = davinci_mmcsd_pm_ops,
.of_match_table = davinci_mmc_dt_ids,
},
diff --git a/drivers/mmc/host/dw_mmc-bluefield.c b/drivers/mmc/host/dw_mmc-bluefield.c
index aa38b1a..10baf12 100644
--- a/drivers/mmc/host/dw_mmc-bluefield.c
+++ b/drivers/mmc/host/dw_mmc-bluefield.c
@@ -55,6 +55,7 @@
.remove = dw_mci_pltfm_remove,
.driver = {
.name = "dwmmc_bluefield",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_bluefield_match,
.pm = &dw_mci_pltfm_pmops,
},
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 5e3d95b..1f8a3c0 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -176,6 +176,7 @@
#ifdef CONFIG_PM_SLEEP
/**
* dw_mci_exynos_suspend_noirq - Exynos-specific suspend code
+ * @dev: Device to suspend (this device)
*
* This ensures that device will be in runtime active state in
* dw_mci_exynos_resume_noirq after calling pm_runtime_force_resume()
@@ -188,6 +189,7 @@
/**
* dw_mci_exynos_resume_noirq - Exynos-specific resume code
+ * @dev: Device to resume (this device)
*
* On exynos5420 there is a silicon errata that will sometimes leave the
* WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate
@@ -462,6 +464,18 @@
}
}
+ /*
+ * If there is no cadiates value, then it needs to return -EIO.
+ * If there are candiates values and don't find bset clk sample value,
+ * then use a first candiates clock sample value.
+ */
+ for (i = 0; i < iter; i++) {
+ __c = ror8(candiates, i);
+ if ((__c & 0x1) == 0x1) {
+ loc = i;
+ goto out;
+ }
+ }
out:
return loc;
}
@@ -472,7 +486,7 @@
struct dw_mci_exynos_priv_data *priv = host->priv;
struct mmc_host *mmc = slot->mmc;
u8 start_smpl, smpl, candiates = 0;
- s8 found = -1;
+ s8 found;
int ret = 0;
start_smpl = dw_mci_exynos_get_clksmpl(host);
@@ -492,6 +506,8 @@
priv->tuned_sample = found;
} else {
ret = -EIO;
+ dev_warn(&mmc->class_dev,
+ "There is no candiates value about clksmpl!\n");
}
return ret;
@@ -590,6 +606,7 @@
.remove = dw_mci_exynos_remove,
.driver = {
.name = "dwmmc_exynos",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_exynos_match,
.pm = &dw_mci_exynos_pmops,
},
diff --git a/drivers/mmc/host/dw_mmc-hi3798cv200.c b/drivers/mmc/host/dw_mmc-hi3798cv200.c
index 83e1bad..39794f9 100644
--- a/drivers/mmc/host/dw_mmc-hi3798cv200.c
+++ b/drivers/mmc/host/dw_mmc-hi3798cv200.c
@@ -200,6 +200,7 @@
.remove = dw_mci_hi3798cv200_remove,
.driver = {
.name = "dwmmc_hi3798cv200",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_hi3798cv200_match,
},
};
diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
index 23b6f65..29d2494 100644
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -238,7 +238,7 @@
if (smpl_phase >= USE_DLY_MIN_SMPL &&
smpl_phase <= USE_DLY_MAX_SMPL)
use_smpl_dly = 1;
- /* fallthrough */
+ fallthrough;
case MMC_TIMING_UHS_SDR50:
if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
@@ -424,7 +424,7 @@
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret) {
+ if (ret < 0) {
dev_err(host->dev, "Regulator set error %d\n", ret);
return ret;
}
@@ -473,6 +473,7 @@
.remove = dw_mci_pltfm_remove,
.driver = {
.name = "dwmmc_k3",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_k3_match,
.pm = &dw_mci_k3_dev_pm_ops,
},
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 7de37f5..73731cd 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -98,6 +98,7 @@
.remove = dw_mci_pltfm_remove,
.driver = {
.name = "dw_mmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_pltfm_match,
.pm = &dw_mci_pltfm_pmops,
},
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index d4d0213..753502c 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -383,6 +383,7 @@
.remove = dw_mci_rockchip_remove,
.driver = {
.name = "dwmmc_rockchip",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_rockchip_match,
.pm = &dw_mci_rockchip_dev_pm_ops,
},
diff --git a/drivers/mmc/host/dw_mmc-zx.c b/drivers/mmc/host/dw_mmc-zx.c
index eada648..51bcc63 100644
--- a/drivers/mmc/host/dw_mmc-zx.c
+++ b/drivers/mmc/host/dw_mmc-zx.c
@@ -155,7 +155,6 @@
struct device_node *node;
struct dw_mci_zx_priv_data *priv;
struct regmap *sysc_base;
- int ret;
/* syscon is needed only by emmc */
node = of_parse_phandle(np, "zte,aon-syscon", 0);
@@ -163,13 +162,9 @@
sysc_base = syscon_node_to_regmap(node);
of_node_put(node);
- if (IS_ERR(sysc_base)) {
- ret = PTR_ERR(sysc_base);
- if (ret != -EPROBE_DEFER)
- dev_err(host->dev, "Can't get syscon: %d\n",
- ret);
- return ret;
- }
+ if (IS_ERR(sysc_base))
+ return dev_err_probe(host->dev, PTR_ERR(sysc_base),
+ "Can't get syscon\n");
} else {
return 0;
}
@@ -227,6 +222,7 @@
.remove = dw_mci_pltfm_remove,
.driver = {
.name = "dwmmc_zx",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = dw_mci_zx_match,
.pm = &dw_mci_zx_dev_pm_ops,
},
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7b280cb..a6170f8 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -176,11 +176,11 @@
debugfs_create_file("regs", S_IRUSR, root, host, &dw_mci_regs_fops);
debugfs_create_file("req", S_IRUSR, root, slot, &dw_mci_req_fops);
- debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
- debugfs_create_x32("pending_events", S_IRUSR, root,
- (u32 *)&host->pending_events);
- debugfs_create_x32("completed_events", S_IRUSR, root,
- (u32 *)&host->completed_events);
+ debugfs_create_u32("state", S_IRUSR, root, &host->state);
+ debugfs_create_xul("pending_events", S_IRUSR, root,
+ &host->pending_events);
+ debugfs_create_xul("completed_events", S_IRUSR, root,
+ &host->completed_events);
}
#endif /* defined(CONFIG_DEBUG_FS) */
@@ -834,12 +834,14 @@
if (!host->dms)
return -ENOMEM;
- host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
- if (!host->dms->ch) {
+ host->dms->ch = dma_request_chan(host->dev, "rx-tx");
+ if (IS_ERR(host->dms->ch)) {
+ int ret = PTR_ERR(host->dms->ch);
+
dev_err(host->dev, "Failed to get external DMA channel.\n");
kfree(host->dms);
host->dms = NULL;
- return -ENXIO;
+ return ret;
}
return 0;
@@ -1545,8 +1547,7 @@
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = mmc_regulator_set_vqmmc(mmc, ios);
-
- if (ret) {
+ if (ret < 0) {
dev_dbg(&mmc->class_dev,
"Regulator set error %d - %s V\n",
ret, uhs & v18 ? "1.8" : "3.3");
@@ -2013,7 +2014,8 @@
* delayed. Allowing the transfer to take place
* avoids races and keeps things simple.
*/
- if (err != -ETIMEDOUT) {
+ if (err != -ETIMEDOUT &&
+ host->dir_status == DW_MCI_RECV_STATUS) {
state = STATE_SENDING_DATA;
continue;
}
@@ -2030,7 +2032,7 @@
}
prev_state = state = STATE_SENDING_DATA;
- /* fall through */
+ fallthrough;
case STATE_SENDING_DATA:
/*
@@ -2088,7 +2090,7 @@
}
prev_state = state = STATE_DATA_BUSY;
- /* fall through */
+ fallthrough;
case STATE_DATA_BUSY:
if (!dw_mci_clear_pending_data_complete(host)) {
@@ -2141,7 +2143,7 @@
*/
prev_state = state = STATE_SENDING_STOP;
- /* fall through */
+ fallthrough;
case STATE_SENDING_STOP:
if (!dw_mci_clear_pending_cmd_complete(host))
@@ -2751,12 +2753,6 @@
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
- /*
- * Support MMC_CAP_ERASE by default.
- * It needs to use trim/discard/erase commands.
- */
- mmc->caps |= MMC_CAP_ERASE;
-
if (host->pdata->pm_caps)
mmc->pm_caps = host->pdata->pm_caps;
@@ -3167,12 +3163,9 @@
if (!host->pdata) {
host->pdata = dw_mci_parse_dt(host);
- if (PTR_ERR(host->pdata) == -EPROBE_DEFER) {
- return -EPROBE_DEFER;
- } else if (IS_ERR(host->pdata)) {
- dev_err(host->dev, "platform data not available\n");
- return -EINVAL;
- }
+ if (IS_ERR(host->pdata))
+ return dev_err_probe(host->dev, PTR_ERR(host->pdata),
+ "platform data not available\n");
}
host->biu_clk = devm_clk_get(host->dev, "biu");
@@ -3442,8 +3435,8 @@
* Restore the initial value at FIFOTH register
* And Invalidate the prev_blksz with zero
*/
- mci_writel(host, FIFOTH, host->fifoth_val);
- host->prev_blksz = 0;
+ mci_writel(host, FIFOTH, host->fifoth_val);
+ host->prev_blksz = 0;
/* Put in max timeout */
mci_writel(host, TMOUT, 0xFFFFFFFF);
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index f816c06..a1f92fe 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -41,6 +41,7 @@
#define JZ_REG_MMC_RESP_FIFO 0x34
#define JZ_REG_MMC_RXFIFO 0x38
#define JZ_REG_MMC_TXFIFO 0x3C
+#define JZ_REG_MMC_LPM 0x40
#define JZ_REG_MMC_DMAC 0x44
#define JZ_MMC_STRPCL_EXIT_MULTIPLE BIT(7)
@@ -77,6 +78,8 @@
#define JZ_MMC_CMDAT_IO_ABORT BIT(11)
#define JZ_MMC_CMDAT_BUS_WIDTH_4BIT BIT(10)
+#define JZ_MMC_CMDAT_BUS_WIDTH_8BIT (BIT(10) | BIT(9))
+#define JZ_MMC_CMDAT_BUS_WIDTH_MASK (BIT(10) | BIT(9))
#define JZ_MMC_CMDAT_DMA_EN BIT(8)
#define JZ_MMC_CMDAT_INIT BIT(7)
#define JZ_MMC_CMDAT_BUSY BIT(6)
@@ -98,12 +101,21 @@
#define JZ_MMC_DMAC_DMA_SEL BIT(1)
#define JZ_MMC_DMAC_DMA_EN BIT(0)
+#define JZ_MMC_LPM_DRV_RISING BIT(31)
+#define JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY BIT(31)
+#define JZ_MMC_LPM_DRV_RISING_1NS_DLY BIT(30)
+#define JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY BIT(29)
+#define JZ_MMC_LPM_LOW_POWER_MODE_EN BIT(0)
+
#define JZ_MMC_CLK_RATE 24000000
+#define JZ_MMC_REQ_TIMEOUT_MS 5000
enum jz4740_mmc_version {
JZ_MMC_JZ4740,
JZ_MMC_JZ4725B,
+ JZ_MMC_JZ4760,
JZ_MMC_JZ4780,
+ JZ_MMC_X1000,
};
enum jz4740_mmc_state {
@@ -429,7 +441,8 @@
if (timeout == 0) {
set_bit(0, &host->waiting);
- mod_timer(&host->timeout_timer, jiffies + 5*HZ);
+ mod_timer(&host->timeout_timer,
+ jiffies + msecs_to_jiffies(JZ_MMC_REQ_TIMEOUT_MS));
jz4740_mmc_set_irq_enabled(host, irq, true);
return true;
}
@@ -726,7 +739,7 @@
break;
jz_mmc_prepare_data_transfer(host);
- /* fall through */
+ fallthrough;
case JZ4740_MMC_STATE_TRANSFER_DATA:
if (host->use_dma) {
@@ -761,7 +774,7 @@
break;
}
jz4740_mmc_write_irq_reg(host, JZ_MMC_IRQ_DATA_TRAN_DONE);
- /* fall through */
+ fallthrough;
case JZ4740_MMC_STATE_SEND_STOP:
if (!req->stop)
@@ -852,6 +865,22 @@
}
writew(div, host->base + JZ_REG_MMC_CLKRT);
+
+ if (real_rate > 25000000) {
+ if (host->version >= JZ_MMC_X1000) {
+ writel(JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY |
+ JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY |
+ JZ_MMC_LPM_LOW_POWER_MODE_EN,
+ host->base + JZ_REG_MMC_LPM);
+ } else if (host->version >= JZ_MMC_JZ4760) {
+ writel(JZ_MMC_LPM_DRV_RISING |
+ JZ_MMC_LPM_LOW_POWER_MODE_EN,
+ host->base + JZ_REG_MMC_LPM);
+ } else if (host->version >= JZ_MMC_JZ4725B)
+ writel(JZ_MMC_LPM_LOW_POWER_MODE_EN,
+ host->base + JZ_REG_MMC_LPM);
+ }
+
return real_rate;
}
@@ -866,7 +895,8 @@
host->state = JZ4740_MMC_STATE_READ_RESPONSE;
set_bit(0, &host->waiting);
- mod_timer(&host->timeout_timer, jiffies + 5*HZ);
+ mod_timer(&host->timeout_timer,
+ jiffies + msecs_to_jiffies(JZ_MMC_REQ_TIMEOUT_MS));
jz4740_mmc_send_command(host, req->cmd);
}
@@ -895,11 +925,16 @@
switch (ios->bus_width) {
case MMC_BUS_WIDTH_1:
- host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_4BIT;
+ host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK;
break;
case MMC_BUS_WIDTH_4:
+ host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK;
host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_4BIT;
break;
+ case MMC_BUS_WIDTH_8:
+ host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_MASK;
+ host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_8BIT;
+ break;
default:
break;
}
@@ -924,7 +959,9 @@
static const struct of_device_id jz4740_mmc_of_match[] = {
{ .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 },
{ .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B },
+ { .compatible = "ingenic,jz4760-mmc", .data = (void *) JZ_MMC_JZ4760 },
{ .compatible = "ingenic,jz4780-mmc", .data = (void *) JZ_MMC_JZ4780 },
+ { .compatible = "ingenic,x1000-mmc", .data = (void *) JZ_MMC_X1000 },
{},
};
MODULE_DEVICE_TABLE(of, jz4740_mmc_of_match);
@@ -954,9 +991,7 @@
ret = mmc_of_parse(mmc);
if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "could not parse device properties: %d\n", ret);
+ dev_err_probe(&pdev->dev, ret, "could not parse device properties\n");
goto err_free_host;
}
@@ -989,6 +1024,12 @@
mmc->f_min = mmc->f_max / 128;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ /*
+ * We use a fixed timeout of 5s, hence inform the core about it. A
+ * future improvement should instead respect the cmd->busy_timeout.
+ */
+ mmc->max_busy_timeout = JZ_MMC_REQ_TIMEOUT_MS;
+
mmc->max_blk_size = (1 << 10) - 1;
mmc->max_blk_count = (1 << 15) - 1;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
@@ -1025,11 +1066,12 @@
dev_err(&pdev->dev, "Failed to add mmc host: %d\n", ret);
goto err_release_dma;
}
- dev_info(&pdev->dev, "JZ SD/MMC card driver registered\n");
+ dev_info(&pdev->dev, "Ingenic SD/MMC card driver registered\n");
dev_info(&pdev->dev, "Using %s, %d-bit mode\n",
host->use_dma ? "DMA" : "PIO",
- (mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1);
+ (mmc->caps & MMC_CAP_8_BIT_DATA) ? 8 :
+ ((mmc->caps & MMC_CAP_4_BIT_DATA) ? 4 : 1));
return 0;
@@ -1064,32 +1106,27 @@
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-
-static int jz4740_mmc_suspend(struct device *dev)
+static int __maybe_unused jz4740_mmc_suspend(struct device *dev)
{
return pinctrl_pm_select_sleep_state(dev);
}
-static int jz4740_mmc_resume(struct device *dev)
+static int __maybe_unused jz4740_mmc_resume(struct device *dev)
{
- return pinctrl_pm_select_default_state(dev);
+ return pinctrl_select_default_state(dev);
}
static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend,
jz4740_mmc_resume);
-#define JZ4740_MMC_PM_OPS (&jz4740_mmc_pm_ops)
-#else
-#define JZ4740_MMC_PM_OPS NULL
-#endif
static struct platform_driver jz4740_mmc_driver = {
.probe = jz4740_mmc_probe,
.remove = jz4740_mmc_remove,
.driver = {
.name = "jz4740-mmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(jz4740_mmc_of_match),
- .pm = JZ4740_MMC_PM_OPS,
+ .pm = pm_ptr(&jz4740_mmc_pm_ops),
},
};
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index a3e3b27..091e0e0 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -161,7 +161,6 @@
bool dram_access_quirk;
struct pinctrl *pinctrl;
- struct pinctrl_state *pins_default;
struct pinctrl_state *pins_clk_gate;
unsigned int bounce_buf_size;
@@ -174,6 +173,8 @@
int irq;
bool vqmmc_enabled;
+ bool needs_pre_post_req;
+
};
#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
@@ -328,7 +329,7 @@
u32 cfg;
if (host->pins_clk_gate)
- pinctrl_select_state(host->pinctrl, host->pins_default);
+ pinctrl_select_default_state(host->dev);
/* Make sure the clock is not stopped in the controller */
cfg = readl(host->regs + SD_EMMC_CFG);
@@ -428,11 +429,9 @@
snprintf(name, sizeof(name), "clkin%d", i);
clk = devm_clk_get(host->dev, name);
- if (IS_ERR(clk)) {
- if (clk != ERR_PTR(-EPROBE_DEFER))
- dev_err(host->dev, "Missing clock %s\n", name);
- return PTR_ERR(clk);
- }
+ if (IS_ERR(clk))
+ return dev_err_probe(host->dev, PTR_ERR(clk),
+ "Missing clock %s\n", name);
mux_parent_names[i] = __clk_get_name(clk);
}
@@ -523,7 +522,7 @@
val |= ADJUST_ADJ_EN;
writel(val, host->regs + host->data->adjust);
- if (mmc->doing_retune)
+ if (mmc_doing_retune(mmc))
dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
else
dly = 0;
@@ -655,6 +654,8 @@
struct meson_host *host = mmc_priv(mmc);
host->cmd = NULL;
+ if (host->needs_pre_post_req)
+ meson_mmc_post_req(mmc, mrq, 0);
mmc_request_done(host->mmc, mrq);
}
@@ -738,7 +739,7 @@
writel(start, host->regs + SD_EMMC_START);
}
-/* local sg copy to buffer version with _to/fromio usage for dram_access_quirk */
+/* local sg copy for dram_access_quirk */
static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
size_t buflen, bool to_buffer)
{
@@ -756,21 +757,27 @@
sg_miter_start(&miter, sgl, nents, sg_flags);
while ((offset < buflen) && sg_miter_next(&miter)) {
- unsigned int len;
+ unsigned int buf_offset = 0;
+ unsigned int len, left;
+ u32 *buf = miter.addr;
len = min(miter.length, buflen - offset);
+ left = len;
- /* When dram_access_quirk, the bounce buffer is a iomem mapping */
- if (host->dram_access_quirk) {
- if (to_buffer)
- memcpy_toio(host->bounce_iomem_buf + offset, miter.addr, len);
- else
- memcpy_fromio(miter.addr, host->bounce_iomem_buf + offset, len);
+ if (to_buffer) {
+ do {
+ writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
+
+ buf_offset += 4;
+ left -= 4;
+ } while (left);
} else {
- if (to_buffer)
- memcpy(host->bounce_buf + offset, miter.addr, len);
- else
- memcpy(miter.addr, host->bounce_buf + offset, len);
+ do {
+ *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
+
+ buf_offset += 4;
+ left -= 4;
+ } while (left);
}
offset += len;
@@ -822,7 +829,11 @@
if (data->flags & MMC_DATA_WRITE) {
cmd_cfg |= CMD_CFG_DATA_WR;
WARN_ON(xfer_bytes > host->bounce_buf_size);
- meson_mmc_copy_buffer(host, data, xfer_bytes, true);
+ if (host->dram_access_quirk)
+ meson_mmc_copy_buffer(host, data, xfer_bytes, true);
+ else
+ sg_copy_to_buffer(data->sg, data->sg_len,
+ host->bounce_buf, xfer_bytes);
dma_wmb();
}
@@ -841,28 +852,56 @@
writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
}
+static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ int i;
+
+ /* Reject request if any element offset or size is not 32bit aligned */
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
+ !IS_ALIGNED(sg->length, sizeof(u32))) {
+ dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
+ data->sg->offset, data->sg->length);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
- bool needs_pre_post_req = mrq->data &&
+ host->needs_pre_post_req = mrq->data &&
!(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
- if (needs_pre_post_req) {
- meson_mmc_get_transfer_mode(mmc, mrq);
- if (!meson_mmc_desc_chain_mode(mrq->data))
- needs_pre_post_req = false;
+ /*
+ * The memory at the end of the controller used as bounce buffer for
+ * the dram_access_quirk only accepts 32bit read/write access,
+ * check the aligment and length of the data before starting the request.
+ */
+ if (host->dram_access_quirk && mrq->data) {
+ mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
+ if (mrq->cmd->error) {
+ mmc_request_done(mmc, mrq);
+ return;
+ }
}
- if (needs_pre_post_req)
+ if (host->needs_pre_post_req) {
+ meson_mmc_get_transfer_mode(mmc, mrq);
+ if (!meson_mmc_desc_chain_mode(mrq->data))
+ host->needs_pre_post_req = false;
+ }
+
+ if (host->needs_pre_post_req)
meson_mmc_pre_req(mmc, mrq);
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
-
- if (needs_pre_post_req)
- meson_mmc_post_req(mmc, mrq, 0);
}
static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
@@ -991,7 +1030,11 @@
if (meson_mmc_bounce_buf_read(data)) {
xfer_bytes = data->blksz * data->blocks;
WARN_ON(xfer_bytes > host->bounce_buf_size);
- meson_mmc_copy_buffer(host, data, xfer_bytes, false);
+ if (host->dram_access_quirk)
+ meson_mmc_copy_buffer(host, data, xfer_bytes, false);
+ else
+ sg_copy_from_buffer(data->sg, data->sg_len,
+ host->bounce_buf, xfer_bytes);
}
next_cmd = meson_mmc_get_next_command(cmd);
@@ -1045,6 +1088,8 @@
static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
{
+ int ret;
+
/* vqmmc regulator is available */
if (!IS_ERR(mmc->supply.vqmmc)) {
/*
@@ -1054,7 +1099,8 @@
* to 1.8v. Please make sure the regulator framework is aware
* of your own regulator constraints
*/
- return mmc_regulator_set_vqmmc(mmc, ios);
+ ret = mmc_regulator_set_vqmmc(mmc, ios);
+ return ret < 0 ? ret : 0;
}
/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
@@ -1115,12 +1161,8 @@
}
ret = device_reset_optional(&pdev->dev);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev, "device reset failed: %d\n", ret);
-
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "device reset failed\n");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->regs = devm_ioremap_resource(&pdev->dev, res);
@@ -1141,13 +1183,6 @@
goto free_host;
}
- host->pins_default = pinctrl_lookup_state(host->pinctrl,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(host->pins_default)) {
- ret = PTR_ERR(host->pins_default);
- goto free_host;
- }
-
host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
"clk-gate");
if (IS_ERR(host->pins_clk_gate)) {
@@ -1315,6 +1350,7 @@
.remove = meson_mmc_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(meson_mmc_of_match),
},
};
diff --git a/drivers/mmc/host/meson-mx-sdhc-clkc.c b/drivers/mmc/host/meson-mx-sdhc-clkc.c
new file mode 100644
index 0000000..e1f29b2
--- /dev/null
+++ b/drivers/mmc/host/meson-mx-sdhc-clkc.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson SDHC clock controller
+ *
+ * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include "meson-mx-sdhc.h"
+
+#define MESON_SDHC_NUM_BUILTIN_CLKS 6
+
+struct meson_mx_sdhc_clkc {
+ struct clk_mux src_sel;
+ struct clk_divider div;
+ struct clk_gate mod_clk_en;
+ struct clk_gate tx_clk_en;
+ struct clk_gate rx_clk_en;
+ struct clk_gate sd_clk_en;
+};
+
+static const struct clk_parent_data meson_mx_sdhc_src_sel_parents[4] = {
+ { .fw_name = "clkin0" },
+ { .fw_name = "clkin1" },
+ { .fw_name = "clkin2" },
+ { .fw_name = "clkin3" },
+};
+
+static const struct clk_div_table meson_mx_sdhc_div_table[] = {
+ { .div = 6, .val = 5, },
+ { .div = 8, .val = 7, },
+ { .div = 9, .val = 8, },
+ { .div = 10, .val = 9, },
+ { .div = 12, .val = 11, },
+ { .div = 16, .val = 15, },
+ { .div = 18, .val = 17, },
+ { .div = 34, .val = 33, },
+ { .div = 142, .val = 141, },
+ { .div = 850, .val = 849, },
+ { .div = 2126, .val = 2125, },
+ { .div = 4096, .val = 4095, },
+ { /* sentinel */ }
+};
+
+static int meson_mx_sdhc_clk_hw_register(struct device *dev,
+ const char *name_suffix,
+ const struct clk_parent_data *parents,
+ unsigned int num_parents,
+ const struct clk_ops *ops,
+ struct clk_hw *hw)
+{
+ struct clk_init_data init = { };
+ char clk_name[32];
+
+ snprintf(clk_name, sizeof(clk_name), "%s#%s", dev_name(dev),
+ name_suffix);
+
+ init.name = clk_name;
+ init.ops = ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_data = parents;
+ init.num_parents = num_parents;
+
+ hw->init = &init;
+
+ return devm_clk_hw_register(dev, hw);
+}
+
+static int meson_mx_sdhc_gate_clk_hw_register(struct device *dev,
+ const char *name_suffix,
+ struct clk_hw *parent,
+ struct clk_hw *hw)
+{
+ struct clk_parent_data parent_data = { .hw = parent };
+
+ return meson_mx_sdhc_clk_hw_register(dev, name_suffix, &parent_data, 1,
+ &clk_gate_ops, hw);
+}
+
+int meson_mx_sdhc_register_clkc(struct device *dev, void __iomem *base,
+ struct clk_bulk_data *clk_bulk_data)
+{
+ struct clk_parent_data div_parent = { };
+ struct meson_mx_sdhc_clkc *clkc_data;
+ int ret;
+
+ clkc_data = devm_kzalloc(dev, sizeof(*clkc_data), GFP_KERNEL);
+ if (!clkc_data)
+ return -ENOMEM;
+
+ clkc_data->src_sel.reg = base + MESON_SDHC_CLKC;
+ clkc_data->src_sel.mask = 0x3;
+ clkc_data->src_sel.shift = 16;
+ ret = meson_mx_sdhc_clk_hw_register(dev, "src_sel",
+ meson_mx_sdhc_src_sel_parents, 4,
+ &clk_mux_ops,
+ &clkc_data->src_sel.hw);
+ if (ret)
+ return ret;
+
+ clkc_data->div.reg = base + MESON_SDHC_CLKC;
+ clkc_data->div.shift = 0;
+ clkc_data->div.width = 12;
+ clkc_data->div.table = meson_mx_sdhc_div_table;
+ div_parent.hw = &clkc_data->src_sel.hw;
+ ret = meson_mx_sdhc_clk_hw_register(dev, "div", &div_parent, 1,
+ &clk_divider_ops,
+ &clkc_data->div.hw);
+ if (ret)
+ return ret;
+
+ clkc_data->mod_clk_en.reg = base + MESON_SDHC_CLKC;
+ clkc_data->mod_clk_en.bit_idx = 15;
+ ret = meson_mx_sdhc_gate_clk_hw_register(dev, "mod_clk_on",
+ &clkc_data->div.hw,
+ &clkc_data->mod_clk_en.hw);
+ if (ret)
+ return ret;
+
+ clkc_data->tx_clk_en.reg = base + MESON_SDHC_CLKC;
+ clkc_data->tx_clk_en.bit_idx = 14;
+ ret = meson_mx_sdhc_gate_clk_hw_register(dev, "tx_clk_on",
+ &clkc_data->div.hw,
+ &clkc_data->tx_clk_en.hw);
+ if (ret)
+ return ret;
+
+ clkc_data->rx_clk_en.reg = base + MESON_SDHC_CLKC;
+ clkc_data->rx_clk_en.bit_idx = 13;
+ ret = meson_mx_sdhc_gate_clk_hw_register(dev, "rx_clk_on",
+ &clkc_data->div.hw,
+ &clkc_data->rx_clk_en.hw);
+ if (ret)
+ return ret;
+
+ clkc_data->sd_clk_en.reg = base + MESON_SDHC_CLKC;
+ clkc_data->sd_clk_en.bit_idx = 12;
+ ret = meson_mx_sdhc_gate_clk_hw_register(dev, "sd_clk_on",
+ &clkc_data->div.hw,
+ &clkc_data->sd_clk_en.hw);
+ if (ret)
+ return ret;
+
+ /*
+ * TODO: Replace clk_hw.clk with devm_clk_hw_get_clk() once that is
+ * available.
+ */
+ clk_bulk_data[0].clk = clkc_data->mod_clk_en.hw.clk;
+ clk_bulk_data[1].clk = clkc_data->sd_clk_en.hw.clk;
+ clk_bulk_data[2].clk = clkc_data->tx_clk_en.hw.clk;
+ clk_bulk_data[3].clk = clkc_data->rx_clk_en.hw.clk;
+
+ return 0;
+}
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c
new file mode 100644
index 0000000..28aa78a
--- /dev/null
+++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c
@@ -0,0 +1,936 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson6/Meson8/Meson8b/Meson8m2 SDHC MMC host controller driver.
+ *
+ * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include "meson-mx-sdhc.h"
+
+#define MESON_SDHC_NUM_BULK_CLKS 4
+#define MESON_SDHC_MAX_BLK_SIZE 512
+#define MESON_SDHC_NUM_TUNING_TRIES 10
+
+#define MESON_SDHC_WAIT_CMD_READY_SLEEP_US 1
+#define MESON_SDHC_WAIT_CMD_READY_TIMEOUT_US 100000
+#define MESON_SDHC_WAIT_BEFORE_SEND_SLEEP_US 1
+#define MESON_SDHC_WAIT_BEFORE_SEND_TIMEOUT_US 200
+
+struct meson_mx_sdhc_data {
+ void (*init_hw)(struct mmc_host *mmc);
+ void (*set_pdma)(struct mmc_host *mmc);
+ void (*wait_before_send)(struct mmc_host *mmc);
+ bool hardware_flush_all_cmds;
+};
+
+struct meson_mx_sdhc_host {
+ struct mmc_host *mmc;
+
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ int error;
+
+ struct regmap *regmap;
+
+ struct clk *pclk;
+ struct clk *sd_clk;
+ struct clk_bulk_data bulk_clks[MESON_SDHC_NUM_BULK_CLKS];
+ bool bulk_clks_enabled;
+
+ const struct meson_mx_sdhc_data *platform;
+};
+
+static const struct regmap_config meson_mx_sdhc_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = MESON_SDHC_CLK2,
+};
+
+static void meson_mx_sdhc_hw_reset(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ regmap_write(host->regmap, MESON_SDHC_SRST, MESON_SDHC_SRST_MAIN_CTRL |
+ MESON_SDHC_SRST_RXFIFO | MESON_SDHC_SRST_TXFIFO |
+ MESON_SDHC_SRST_DPHY_RX | MESON_SDHC_SRST_DPHY_TX |
+ MESON_SDHC_SRST_DMA_IF);
+ usleep_range(10, 100);
+
+ regmap_write(host->regmap, MESON_SDHC_SRST, 0);
+ usleep_range(10, 100);
+}
+
+static void meson_mx_sdhc_clear_fifo(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ u32 stat;
+
+ regmap_read(host->regmap, MESON_SDHC_STAT, &stat);
+ if (!FIELD_GET(MESON_SDHC_STAT_RXFIFO_CNT, stat) &&
+ !FIELD_GET(MESON_SDHC_STAT_TXFIFO_CNT, stat))
+ return;
+
+ regmap_write(host->regmap, MESON_SDHC_SRST, MESON_SDHC_SRST_RXFIFO |
+ MESON_SDHC_SRST_TXFIFO | MESON_SDHC_SRST_MAIN_CTRL);
+ udelay(5);
+
+ regmap_read(host->regmap, MESON_SDHC_STAT, &stat);
+ if (FIELD_GET(MESON_SDHC_STAT_RXFIFO_CNT, stat) ||
+ FIELD_GET(MESON_SDHC_STAT_TXFIFO_CNT, stat))
+ dev_warn(mmc_dev(host->mmc),
+ "Failed to clear FIFOs, RX: %lu, TX: %lu\n",
+ FIELD_GET(MESON_SDHC_STAT_RXFIFO_CNT, stat),
+ FIELD_GET(MESON_SDHC_STAT_TXFIFO_CNT, stat));
+}
+
+static void meson_mx_sdhc_wait_cmd_ready(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ u32 stat, esta;
+ int ret;
+
+ ret = regmap_read_poll_timeout(host->regmap, MESON_SDHC_STAT, stat,
+ !(stat & MESON_SDHC_STAT_CMD_BUSY),
+ MESON_SDHC_WAIT_CMD_READY_SLEEP_US,
+ MESON_SDHC_WAIT_CMD_READY_TIMEOUT_US);
+ if (ret) {
+ dev_warn(mmc_dev(mmc),
+ "Failed to poll for CMD_BUSY while processing CMD%d\n",
+ host->cmd->opcode);
+ meson_mx_sdhc_hw_reset(mmc);
+ }
+
+ ret = regmap_read_poll_timeout(host->regmap, MESON_SDHC_ESTA, esta,
+ !(esta & MESON_SDHC_ESTA_11_13),
+ MESON_SDHC_WAIT_CMD_READY_SLEEP_US,
+ MESON_SDHC_WAIT_CMD_READY_TIMEOUT_US);
+ if (ret) {
+ dev_warn(mmc_dev(mmc),
+ "Failed to poll for ESTA[13:11] while processing CMD%d\n",
+ host->cmd->opcode);
+ meson_mx_sdhc_hw_reset(mmc);
+ }
+}
+
+static void meson_mx_sdhc_start_cmd(struct mmc_host *mmc,
+ struct mmc_command *cmd)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ bool manual_stop = false;
+ u32 ictl, send;
+ int pack_len;
+
+ host->cmd = cmd;
+
+ ictl = MESON_SDHC_ICTL_DATA_TIMEOUT | MESON_SDHC_ICTL_DATA_ERR_CRC |
+ MESON_SDHC_ICTL_RXFIFO_FULL | MESON_SDHC_ICTL_TXFIFO_EMPTY |
+ MESON_SDHC_ICTL_RESP_TIMEOUT | MESON_SDHC_ICTL_RESP_ERR_CRC;
+
+ send = FIELD_PREP(MESON_SDHC_SEND_CMD_INDEX, cmd->opcode);
+
+ if (cmd->data) {
+ send |= MESON_SDHC_SEND_CMD_HAS_DATA;
+ send |= FIELD_PREP(MESON_SDHC_SEND_TOTAL_PACK,
+ cmd->data->blocks - 1);
+
+ if (cmd->data->blksz < MESON_SDHC_MAX_BLK_SIZE)
+ pack_len = cmd->data->blksz;
+ else
+ pack_len = 0;
+
+ if (cmd->data->flags & MMC_DATA_WRITE)
+ send |= MESON_SDHC_SEND_DATA_DIR;
+
+ /*
+ * If command with no data, just wait response done
+ * interrupt(int[0]), and if command with data transfer, just
+ * wait dma done interrupt(int[11]), don't need care about
+ * dat0 busy or not.
+ */
+ if (host->platform->hardware_flush_all_cmds ||
+ cmd->data->flags & MMC_DATA_WRITE)
+ /* hardware flush: */
+ ictl |= MESON_SDHC_ICTL_DMA_DONE;
+ else
+ /* software flush: */
+ ictl |= MESON_SDHC_ICTL_DATA_XFER_OK;
+
+ /*
+ * Mimic the logic from the vendor driver where (only)
+ * SD_IO_RW_EXTENDED commands with more than one block set the
+ * MESON_SDHC_MISC_MANUAL_STOP bit. This fixes the firmware
+ * download in the brcmfmac driver for a BCM43362/1 card.
+ * Without this sdio_memcpy_toio() (with a size of 219557
+ * bytes) times out if MESON_SDHC_MISC_MANUAL_STOP is not set.
+ */
+ manual_stop = cmd->data->blocks > 1 &&
+ cmd->opcode == SD_IO_RW_EXTENDED;
+ } else {
+ pack_len = 0;
+
+ ictl |= MESON_SDHC_ICTL_RESP_OK;
+ }
+
+ regmap_update_bits(host->regmap, MESON_SDHC_MISC,
+ MESON_SDHC_MISC_MANUAL_STOP,
+ manual_stop ? MESON_SDHC_MISC_MANUAL_STOP : 0);
+
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ send |= MESON_SDHC_SEND_DATA_STOP;
+
+ if (cmd->flags & MMC_RSP_PRESENT)
+ send |= MESON_SDHC_SEND_CMD_HAS_RESP;
+
+ if (cmd->flags & MMC_RSP_136) {
+ send |= MESON_SDHC_SEND_RESP_LEN;
+ send |= MESON_SDHC_SEND_RESP_NO_CRC;
+ }
+
+ if (!(cmd->flags & MMC_RSP_CRC))
+ send |= MESON_SDHC_SEND_RESP_NO_CRC;
+
+ if (cmd->flags & MMC_RSP_BUSY)
+ send |= MESON_SDHC_SEND_R1B;
+
+ /* enable the new IRQs and mask all pending ones */
+ regmap_write(host->regmap, MESON_SDHC_ICTL, ictl);
+ regmap_write(host->regmap, MESON_SDHC_ISTA, MESON_SDHC_ISTA_ALL_IRQS);
+
+ regmap_write(host->regmap, MESON_SDHC_ARGU, cmd->arg);
+
+ regmap_update_bits(host->regmap, MESON_SDHC_CTRL,
+ MESON_SDHC_CTRL_PACK_LEN,
+ FIELD_PREP(MESON_SDHC_CTRL_PACK_LEN, pack_len));
+
+ if (cmd->data)
+ regmap_write(host->regmap, MESON_SDHC_ADDR,
+ sg_dma_address(cmd->data->sg));
+
+ meson_mx_sdhc_wait_cmd_ready(mmc);
+
+ if (cmd->data)
+ host->platform->set_pdma(mmc);
+
+ if (host->platform->wait_before_send)
+ host->platform->wait_before_send(mmc);
+
+ regmap_write(host->regmap, MESON_SDHC_SEND, send);
+}
+
+static void meson_mx_sdhc_disable_clks(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ if (!host->bulk_clks_enabled)
+ return;
+
+ clk_bulk_disable_unprepare(MESON_SDHC_NUM_BULK_CLKS, host->bulk_clks);
+
+ host->bulk_clks_enabled = false;
+}
+
+static int meson_mx_sdhc_enable_clks(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ int ret;
+
+ if (host->bulk_clks_enabled)
+ return 0;
+
+ ret = clk_bulk_prepare_enable(MESON_SDHC_NUM_BULK_CLKS,
+ host->bulk_clks);
+ if (ret)
+ return ret;
+
+ host->bulk_clks_enabled = true;
+
+ return 0;
+}
+
+static int meson_mx_sdhc_set_clk(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ u32 rx_clk_phase;
+ int ret;
+
+ meson_mx_sdhc_disable_clks(mmc);
+
+ if (ios->clock) {
+ ret = clk_set_rate(host->sd_clk, ios->clock);
+ if (ret) {
+ dev_warn(mmc_dev(mmc),
+ "Failed to set MMC clock to %uHz: %d\n",
+ ios->clock, host->error);
+ return ret;
+ }
+
+ ret = meson_mx_sdhc_enable_clks(mmc);
+ if (ret)
+ return ret;
+
+ mmc->actual_clock = clk_get_rate(host->sd_clk);
+
+ /*
+ * according to Amlogic the following latching points are
+ * selected with empirical values, there is no (known) formula
+ * to calculate these.
+ */
+ if (mmc->actual_clock > 100000000) {
+ rx_clk_phase = 1;
+ } else if (mmc->actual_clock > 45000000) {
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+ rx_clk_phase = 15;
+ else
+ rx_clk_phase = 11;
+ } else if (mmc->actual_clock >= 25000000) {
+ rx_clk_phase = 15;
+ } else if (mmc->actual_clock > 5000000) {
+ rx_clk_phase = 23;
+ } else if (mmc->actual_clock > 1000000) {
+ rx_clk_phase = 55;
+ } else {
+ rx_clk_phase = 1061;
+ }
+
+ regmap_update_bits(host->regmap, MESON_SDHC_CLK2,
+ MESON_SDHC_CLK2_RX_CLK_PHASE,
+ FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE,
+ rx_clk_phase));
+ } else {
+ mmc->actual_clock = 0;
+ }
+
+ return 0;
+}
+
+static void meson_mx_sdhc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ unsigned short vdd = ios->vdd;
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ vdd = 0;
+ fallthrough;
+
+ case MMC_POWER_UP:
+ if (!IS_ERR(mmc->supply.vmmc)) {
+ host->error = mmc_regulator_set_ocr(mmc,
+ mmc->supply.vmmc,
+ vdd);
+ if (host->error)
+ return;
+ }
+
+ break;
+
+ case MMC_POWER_ON:
+ break;
+ }
+
+ host->error = meson_mx_sdhc_set_clk(mmc, ios);
+ if (host->error)
+ return;
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ regmap_update_bits(host->regmap, MESON_SDHC_CTRL,
+ MESON_SDHC_CTRL_DAT_TYPE,
+ FIELD_PREP(MESON_SDHC_CTRL_DAT_TYPE, 0));
+ break;
+
+ case MMC_BUS_WIDTH_4:
+ regmap_update_bits(host->regmap, MESON_SDHC_CTRL,
+ MESON_SDHC_CTRL_DAT_TYPE,
+ FIELD_PREP(MESON_SDHC_CTRL_DAT_TYPE, 1));
+ break;
+
+ case MMC_BUS_WIDTH_8:
+ regmap_update_bits(host->regmap, MESON_SDHC_CTRL,
+ MESON_SDHC_CTRL_DAT_TYPE,
+ FIELD_PREP(MESON_SDHC_CTRL_DAT_TYPE, 2));
+ break;
+
+ default:
+ dev_err(mmc_dev(mmc), "unsupported bus width: %d\n",
+ ios->bus_width);
+ host->error = -EINVAL;
+ return;
+ }
+}
+
+static int meson_mx_sdhc_map_dma(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct mmc_data *data = mrq->data;
+ int dma_len;
+
+ if (!data)
+ return 0;
+
+ dma_len = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+ if (dma_len <= 0) {
+ dev_err(mmc_dev(mmc), "dma_map_sg failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void meson_mx_sdhc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+
+ if (!host->error)
+ host->error = meson_mx_sdhc_map_dma(mmc, mrq);
+
+ if (host->error) {
+ cmd->error = host->error;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ host->mrq = mrq;
+
+ meson_mx_sdhc_start_cmd(mmc, mrq->cmd);
+}
+
+static int meson_mx_sdhc_card_busy(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ u32 stat;
+
+ regmap_read(host->regmap, MESON_SDHC_STAT, &stat);
+ return FIELD_GET(MESON_SDHC_STAT_DAT3_0, stat) == 0;
+}
+
+static bool meson_mx_sdhc_tuning_point_matches(struct mmc_host *mmc,
+ u32 opcode)
+{
+ unsigned int i, num_matches = 0;
+ int ret;
+
+ for (i = 0; i < MESON_SDHC_NUM_TUNING_TRIES; i++) {
+ ret = mmc_send_tuning(mmc, opcode, NULL);
+ if (!ret)
+ num_matches++;
+ }
+
+ return num_matches == MESON_SDHC_NUM_TUNING_TRIES;
+}
+
+static int meson_mx_sdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ int div, start, len, best_start, best_len;
+ int curr_phase, old_phase, new_phase;
+ u32 val;
+
+ len = 0;
+ start = 0;
+ best_len = 0;
+
+ regmap_read(host->regmap, MESON_SDHC_CLK2, &val);
+ old_phase = FIELD_GET(MESON_SDHC_CLK2_RX_CLK_PHASE, val);
+
+ regmap_read(host->regmap, MESON_SDHC_CLKC, &val);
+ div = FIELD_GET(MESON_SDHC_CLKC_CLK_DIV, val);
+
+ for (curr_phase = 0; curr_phase <= div; curr_phase++) {
+ regmap_update_bits(host->regmap, MESON_SDHC_CLK2,
+ MESON_SDHC_CLK2_RX_CLK_PHASE,
+ FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE,
+ curr_phase));
+
+ if (meson_mx_sdhc_tuning_point_matches(mmc, opcode)) {
+ if (!len) {
+ start = curr_phase;
+
+ dev_dbg(mmc_dev(mmc),
+ "New RX phase window starts at %u\n",
+ start);
+ }
+
+ len++;
+ } else {
+ if (len > best_len) {
+ best_start = start;
+ best_len = len;
+
+ dev_dbg(mmc_dev(mmc),
+ "New best RX phase window: %u - %u\n",
+ best_start, best_start + best_len);
+ }
+
+ /* reset the current window */
+ len = 0;
+ }
+ }
+
+ if (len > best_len)
+ /* the last window is the best (or possibly only) window */
+ new_phase = start + (len / 2);
+ else if (best_len)
+ /* there was a better window than the last */
+ new_phase = best_start + (best_len / 2);
+ else
+ /* no window was found at all, reset to the original phase */
+ new_phase = old_phase;
+
+ regmap_update_bits(host->regmap, MESON_SDHC_CLK2,
+ MESON_SDHC_CLK2_RX_CLK_PHASE,
+ FIELD_PREP(MESON_SDHC_CLK2_RX_CLK_PHASE,
+ new_phase));
+
+ if (!len && !best_len)
+ return -EIO;
+
+ dev_dbg(mmc_dev(mmc), "Tuned RX clock phase to %u\n", new_phase);
+
+ return 0;
+}
+
+static const struct mmc_host_ops meson_mx_sdhc_ops = {
+ .hw_reset = meson_mx_sdhc_hw_reset,
+ .request = meson_mx_sdhc_request,
+ .set_ios = meson_mx_sdhc_set_ios,
+ .card_busy = meson_mx_sdhc_card_busy,
+ .execute_tuning = meson_mx_sdhc_execute_tuning,
+ .get_cd = mmc_gpio_get_cd,
+ .get_ro = mmc_gpio_get_ro,
+};
+
+static void meson_mx_sdhc_request_done(struct meson_mx_sdhc_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_host *mmc = host->mmc;
+
+ /* disable interrupts and mask all pending ones */
+ regmap_update_bits(host->regmap, MESON_SDHC_ICTL,
+ MESON_SDHC_ICTL_ALL_IRQS, 0);
+ regmap_update_bits(host->regmap, MESON_SDHC_ISTA,
+ MESON_SDHC_ISTA_ALL_IRQS, MESON_SDHC_ISTA_ALL_IRQS);
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+
+ mmc_request_done(mmc, mrq);
+}
+
+static u32 meson_mx_sdhc_read_response(struct meson_mx_sdhc_host *host, u8 idx)
+{
+ u32 val;
+
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_DMA_MODE, 0);
+
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_PIO_RDRESP,
+ FIELD_PREP(MESON_SDHC_PDMA_PIO_RDRESP, idx));
+
+ regmap_read(host->regmap, MESON_SDHC_ARGU, &val);
+
+ return val;
+}
+
+static irqreturn_t meson_mx_sdhc_irq(int irq, void *data)
+{
+ struct meson_mx_sdhc_host *host = data;
+ struct mmc_command *cmd = host->cmd;
+ u32 ictl, ista;
+
+ regmap_read(host->regmap, MESON_SDHC_ICTL, &ictl);
+ regmap_read(host->regmap, MESON_SDHC_ISTA, &ista);
+
+ if (!(ictl & ista))
+ return IRQ_NONE;
+
+ if (ista & MESON_SDHC_ISTA_RXFIFO_FULL ||
+ ista & MESON_SDHC_ISTA_TXFIFO_EMPTY)
+ cmd->error = -EIO;
+ else if (ista & MESON_SDHC_ISTA_RESP_ERR_CRC)
+ cmd->error = -EILSEQ;
+ else if (ista & MESON_SDHC_ISTA_RESP_TIMEOUT)
+ cmd->error = -ETIMEDOUT;
+
+ if (cmd->data) {
+ if (ista & MESON_SDHC_ISTA_DATA_ERR_CRC)
+ cmd->data->error = -EILSEQ;
+ else if (ista & MESON_SDHC_ISTA_DATA_TIMEOUT)
+ cmd->data->error = -ETIMEDOUT;
+ }
+
+ if (cmd->error || (cmd->data && cmd->data->error))
+ dev_dbg(mmc_dev(host->mmc), "CMD%d error, ISTA: 0x%08x\n",
+ cmd->opcode, ista);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t meson_mx_sdhc_irq_thread(int irq, void *irq_data)
+{
+ struct meson_mx_sdhc_host *host = irq_data;
+ struct mmc_command *cmd;
+ u32 val;
+
+ cmd = host->cmd;
+ if (WARN_ON(!cmd))
+ return IRQ_HANDLED;
+
+ if (cmd->data && !cmd->data->error) {
+ if (!host->platform->hardware_flush_all_cmds &&
+ cmd->data->flags & MMC_DATA_READ) {
+ meson_mx_sdhc_wait_cmd_ready(host->mmc);
+
+ /*
+ * If MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH was
+ * previously 0x1 then it has to be set to 0x3. If it
+ * was 0x0 before then it has to be set to 0x2. Without
+ * this reading SD cards sometimes transfers garbage,
+ * which results in cards not being detected due to:
+ * unrecognised SCR structure version <random number>
+ */
+ val = FIELD_PREP(MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH,
+ 2);
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA, val,
+ val);
+ }
+
+ dma_unmap_sg(mmc_dev(host->mmc), cmd->data->sg,
+ cmd->data->sg_len, mmc_get_dma_dir(cmd->data));
+
+ cmd->data->bytes_xfered = cmd->data->blksz * cmd->data->blocks;
+ }
+
+ meson_mx_sdhc_wait_cmd_ready(host->mmc);
+
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = meson_mx_sdhc_read_response(host, 4);
+ cmd->resp[1] = meson_mx_sdhc_read_response(host, 3);
+ cmd->resp[2] = meson_mx_sdhc_read_response(host, 2);
+ cmd->resp[3] = meson_mx_sdhc_read_response(host, 1);
+ } else {
+ cmd->resp[0] = meson_mx_sdhc_read_response(host, 0);
+ }
+
+ if (cmd->error == -EIO || cmd->error == -ETIMEDOUT)
+ meson_mx_sdhc_hw_reset(host->mmc);
+ else if (cmd->data)
+ /*
+ * Clear the FIFOs after completing data transfers to prevent
+ * corrupting data on write access. It's not clear why this is
+ * needed (for reads and writes), but it mimics what the BSP
+ * kernel did.
+ */
+ meson_mx_sdhc_clear_fifo(host->mmc);
+
+ meson_mx_sdhc_request_done(host);
+
+ return IRQ_HANDLED;
+}
+
+static void meson_mx_sdhc_init_hw_meson8(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ regmap_write(host->regmap, MESON_SDHC_MISC,
+ FIELD_PREP(MESON_SDHC_MISC_TXSTART_THRES, 7) |
+ FIELD_PREP(MESON_SDHC_MISC_WCRC_ERR_PATT, 5) |
+ FIELD_PREP(MESON_SDHC_MISC_WCRC_OK_PATT, 2));
+
+ regmap_write(host->regmap, MESON_SDHC_ENHC,
+ FIELD_PREP(MESON_SDHC_ENHC_RXFIFO_TH, 63) |
+ MESON_SDHC_ENHC_MESON6_DMA_WR_RESP |
+ FIELD_PREP(MESON_SDHC_ENHC_MESON6_RX_TIMEOUT, 255) |
+ FIELD_PREP(MESON_SDHC_ENHC_SDIO_IRQ_PERIOD, 12));
+};
+
+static void meson_mx_sdhc_set_pdma_meson8(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ if (host->cmd->data->flags & MMC_DATA_WRITE)
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_DMA_MODE |
+ MESON_SDHC_PDMA_RD_BURST |
+ MESON_SDHC_PDMA_TXFIFO_FILL,
+ MESON_SDHC_PDMA_DMA_MODE |
+ FIELD_PREP(MESON_SDHC_PDMA_RD_BURST, 31) |
+ MESON_SDHC_PDMA_TXFIFO_FILL);
+ else
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_DMA_MODE |
+ MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH,
+ MESON_SDHC_PDMA_DMA_MODE |
+ FIELD_PREP(MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH,
+ 1));
+
+ if (host->cmd->data->flags & MMC_DATA_WRITE)
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_RD_BURST,
+ FIELD_PREP(MESON_SDHC_PDMA_RD_BURST, 15));
+}
+
+static void meson_mx_sdhc_wait_before_send_meson8(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+ u32 val;
+ int ret;
+
+ ret = regmap_read_poll_timeout(host->regmap, MESON_SDHC_ESTA, val,
+ val == 0,
+ MESON_SDHC_WAIT_BEFORE_SEND_SLEEP_US,
+ MESON_SDHC_WAIT_BEFORE_SEND_TIMEOUT_US);
+ if (ret)
+ dev_warn(mmc_dev(mmc),
+ "Failed to wait for ESTA to clear: 0x%08x\n", val);
+
+ if (host->cmd->data && host->cmd->data->flags & MMC_DATA_WRITE) {
+ ret = regmap_read_poll_timeout(host->regmap, MESON_SDHC_STAT,
+ val, val & MESON_SDHC_STAT_TXFIFO_CNT,
+ MESON_SDHC_WAIT_BEFORE_SEND_SLEEP_US,
+ MESON_SDHC_WAIT_BEFORE_SEND_TIMEOUT_US);
+ if (ret)
+ dev_warn(mmc_dev(mmc),
+ "Failed to wait for TX FIFO to fill\n");
+ }
+}
+
+static void meson_mx_sdhc_init_hw_meson8m2(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ regmap_write(host->regmap, MESON_SDHC_MISC,
+ FIELD_PREP(MESON_SDHC_MISC_TXSTART_THRES, 6) |
+ FIELD_PREP(MESON_SDHC_MISC_WCRC_ERR_PATT, 5) |
+ FIELD_PREP(MESON_SDHC_MISC_WCRC_OK_PATT, 2));
+
+ regmap_write(host->regmap, MESON_SDHC_ENHC,
+ FIELD_PREP(MESON_SDHC_ENHC_RXFIFO_TH, 64) |
+ FIELD_PREP(MESON_SDHC_ENHC_MESON8M2_DEBUG, 1) |
+ MESON_SDHC_ENHC_MESON8M2_WRRSP_MODE |
+ FIELD_PREP(MESON_SDHC_ENHC_SDIO_IRQ_PERIOD, 12));
+}
+
+static void meson_mx_sdhc_set_pdma_meson8m2(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ regmap_update_bits(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_DMA_MODE, MESON_SDHC_PDMA_DMA_MODE);
+}
+
+static void meson_mx_sdhc_init_hw(struct mmc_host *mmc)
+{
+ struct meson_mx_sdhc_host *host = mmc_priv(mmc);
+
+ meson_mx_sdhc_hw_reset(mmc);
+
+ regmap_write(host->regmap, MESON_SDHC_CTRL,
+ FIELD_PREP(MESON_SDHC_CTRL_RX_PERIOD, 0xf) |
+ FIELD_PREP(MESON_SDHC_CTRL_RX_TIMEOUT, 0x7f) |
+ FIELD_PREP(MESON_SDHC_CTRL_RX_ENDIAN, 0x7) |
+ FIELD_PREP(MESON_SDHC_CTRL_TX_ENDIAN, 0x7));
+
+ /*
+ * start with a valid divider and enable the memory (un-setting
+ * MESON_SDHC_CLKC_MEM_PWR_OFF).
+ */
+ regmap_write(host->regmap, MESON_SDHC_CLKC, MESON_SDHC_CLKC_CLK_DIV);
+
+ regmap_write(host->regmap, MESON_SDHC_CLK2,
+ FIELD_PREP(MESON_SDHC_CLK2_SD_CLK_PHASE, 1));
+
+ regmap_write(host->regmap, MESON_SDHC_PDMA,
+ MESON_SDHC_PDMA_DMA_URGENT |
+ FIELD_PREP(MESON_SDHC_PDMA_WR_BURST, 7) |
+ FIELD_PREP(MESON_SDHC_PDMA_TXFIFO_TH, 49) |
+ FIELD_PREP(MESON_SDHC_PDMA_RD_BURST, 15) |
+ FIELD_PREP(MESON_SDHC_PDMA_RXFIFO_TH, 7));
+
+ /* some initialization bits depend on the SoC: */
+ host->platform->init_hw(mmc);
+
+ /* disable and mask all interrupts: */
+ regmap_write(host->regmap, MESON_SDHC_ICTL, 0);
+ regmap_write(host->regmap, MESON_SDHC_ISTA, MESON_SDHC_ISTA_ALL_IRQS);
+}
+
+static int meson_mx_sdhc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct meson_mx_sdhc_host *host;
+ struct mmc_host *mmc;
+ void __iomem *base;
+ int ret, irq;
+
+ mmc = mmc_alloc_host(sizeof(*host), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ ret = devm_add_action_or_reset(dev, (void(*)(void *))mmc_free_host,
+ mmc);
+ if (ret) {
+ dev_err(dev, "Failed to register mmc_free_host action\n");
+ return ret;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ platform_set_drvdata(pdev, host);
+
+ host->platform = device_get_match_data(dev);
+ if (!host->platform)
+ return -EINVAL;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ host->regmap = devm_regmap_init_mmio(dev, base,
+ &meson_mx_sdhc_regmap_config);
+ if (IS_ERR(host->regmap))
+ return PTR_ERR(host->regmap);
+
+ host->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(host->pclk))
+ return PTR_ERR(host->pclk);
+
+ /* accessing any register requires the module clock to be enabled: */
+ ret = clk_prepare_enable(host->pclk);
+ if (ret) {
+ dev_err(dev, "Failed to enable 'pclk' clock\n");
+ return ret;
+ }
+
+ meson_mx_sdhc_init_hw(mmc);
+
+ ret = meson_mx_sdhc_register_clkc(dev, base, host->bulk_clks);
+ if (ret)
+ goto err_disable_pclk;
+
+ host->sd_clk = host->bulk_clks[1].clk;
+
+ /* Get regulators and the supported OCR mask */
+ ret = mmc_regulator_get_supply(mmc);
+ if (ret)
+ goto err_disable_pclk;
+
+ mmc->max_req_size = SZ_128K;
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_blk_count = FIELD_GET(MESON_SDHC_SEND_TOTAL_PACK, ~0);
+ mmc->max_blk_size = MESON_SDHC_MAX_BLK_SIZE;
+ mmc->max_busy_timeout = 30 * MSEC_PER_SEC;
+ mmc->f_min = clk_round_rate(host->sd_clk, 1);
+ mmc->f_max = clk_round_rate(host->sd_clk, ULONG_MAX);
+ mmc->max_current_180 = 300;
+ mmc->max_current_330 = 300;
+ mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_HW_RESET;
+ mmc->ops = &meson_mx_sdhc_ops;
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto err_disable_pclk;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto err_disable_pclk;
+ }
+
+ ret = devm_request_threaded_irq(dev, irq, meson_mx_sdhc_irq,
+ meson_mx_sdhc_irq_thread, IRQF_ONESHOT,
+ NULL, host);
+ if (ret)
+ goto err_disable_pclk;
+
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto err_disable_pclk;
+
+ return 0;
+
+err_disable_pclk:
+ clk_disable_unprepare(host->pclk);
+ return ret;
+}
+
+static int meson_mx_sdhc_remove(struct platform_device *pdev)
+{
+ struct meson_mx_sdhc_host *host = platform_get_drvdata(pdev);
+
+ mmc_remove_host(host->mmc);
+
+ meson_mx_sdhc_disable_clks(host->mmc);
+
+ clk_disable_unprepare(host->pclk);
+
+ return 0;
+}
+
+static const struct meson_mx_sdhc_data meson_mx_sdhc_data_meson8 = {
+ .init_hw = meson_mx_sdhc_init_hw_meson8,
+ .set_pdma = meson_mx_sdhc_set_pdma_meson8,
+ .wait_before_send = meson_mx_sdhc_wait_before_send_meson8,
+ .hardware_flush_all_cmds = false,
+};
+
+static const struct meson_mx_sdhc_data meson_mx_sdhc_data_meson8m2 = {
+ .init_hw = meson_mx_sdhc_init_hw_meson8m2,
+ .set_pdma = meson_mx_sdhc_set_pdma_meson8m2,
+ .hardware_flush_all_cmds = true,
+};
+
+static const struct of_device_id meson_mx_sdhc_of_match[] = {
+ {
+ .compatible = "amlogic,meson8-sdhc",
+ .data = &meson_mx_sdhc_data_meson8
+ },
+ {
+ .compatible = "amlogic,meson8b-sdhc",
+ .data = &meson_mx_sdhc_data_meson8
+ },
+ {
+ .compatible = "amlogic,meson8m2-sdhc",
+ .data = &meson_mx_sdhc_data_meson8m2
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_mx_sdhc_of_match);
+
+static struct platform_driver meson_mx_sdhc_driver = {
+ .probe = meson_mx_sdhc_probe,
+ .remove = meson_mx_sdhc_remove,
+ .driver = {
+ .name = "meson-mx-sdhc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = of_match_ptr(meson_mx_sdhc_of_match),
+ },
+};
+
+module_platform_driver(meson_mx_sdhc_driver);
+
+MODULE_DESCRIPTION("Meson6, Meson8, Meson8b and Meson8m2 SDHC Host Driver");
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/meson-mx-sdhc.h b/drivers/mmc/host/meson-mx-sdhc.h
new file mode 100644
index 0000000..230e8fb
--- /dev/null
+++ b/drivers/mmc/host/meson-mx-sdhc.h
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#ifndef _MESON_MX_SDHC_H_
+#define _MESON_MX_SDHC_H_
+
+#include <linux/bitfield.h>
+
+#define MESON_SDHC_ARGU 0x00
+
+#define MESON_SDHC_SEND 0x04
+ #define MESON_SDHC_SEND_CMD_INDEX GENMASK(5, 0)
+ #define MESON_SDHC_SEND_CMD_HAS_RESP BIT(6)
+ #define MESON_SDHC_SEND_CMD_HAS_DATA BIT(7)
+ #define MESON_SDHC_SEND_RESP_LEN BIT(8)
+ #define MESON_SDHC_SEND_RESP_NO_CRC BIT(9)
+ #define MESON_SDHC_SEND_DATA_DIR BIT(10)
+ #define MESON_SDHC_SEND_DATA_STOP BIT(11)
+ #define MESON_SDHC_SEND_R1B BIT(12)
+ #define MESON_SDHC_SEND_TOTAL_PACK GENMASK(31, 16)
+
+#define MESON_SDHC_CTRL 0x08
+ #define MESON_SDHC_CTRL_DAT_TYPE GENMASK(1, 0)
+ #define MESON_SDHC_CTRL_DDR_MODE BIT(2)
+ #define MESON_SDHC_CTRL_TX_CRC_NOCHECK BIT(3)
+ #define MESON_SDHC_CTRL_PACK_LEN GENMASK(12, 4)
+ #define MESON_SDHC_CTRL_RX_TIMEOUT GENMASK(19, 13)
+ #define MESON_SDHC_CTRL_RX_PERIOD GENMASK(23, 20)
+ #define MESON_SDHC_CTRL_RX_ENDIAN GENMASK(26, 24)
+ #define MESON_SDHC_CTRL_SDIO_IRQ_MODE BIT(27)
+ #define MESON_SDHC_CTRL_DAT0_IRQ_SEL BIT(28)
+ #define MESON_SDHC_CTRL_TX_ENDIAN GENMASK(31, 29)
+
+#define MESON_SDHC_STAT 0x0c
+ #define MESON_SDHC_STAT_CMD_BUSY BIT(0)
+ #define MESON_SDHC_STAT_DAT3_0 GENMASK(4, 1)
+ #define MESON_SDHC_STAT_CMD BIT(5)
+ #define MESON_SDHC_STAT_RXFIFO_CNT GENMASK(12, 6)
+ #define MESON_SDHC_STAT_TXFIFO_CNT GENMASK(19, 13)
+ #define MESON_SDHC_STAT_DAT7_4 GENMASK(23, 20)
+
+#define MESON_SDHC_CLKC 0x10
+ #define MESON_SDHC_CLKC_CLK_DIV GENMASK(11, 0)
+ #define MESON_SDHC_CLKC_CLK_JIC BIT(24)
+ #define MESON_SDHC_CLKC_MEM_PWR_OFF GENMASK(26, 25)
+
+#define MESON_SDHC_ADDR 0x14
+
+#define MESON_SDHC_PDMA 0x18
+ #define MESON_SDHC_PDMA_DMA_MODE BIT(0)
+ #define MESON_SDHC_PDMA_PIO_RDRESP GENMASK(3, 1)
+ #define MESON_SDHC_PDMA_DMA_URGENT BIT(4)
+ #define MESON_SDHC_PDMA_WR_BURST GENMASK(9, 5)
+ #define MESON_SDHC_PDMA_RD_BURST GENMASK(14, 10)
+ #define MESON_SDHC_PDMA_RXFIFO_TH GENMASK(21, 15)
+ #define MESON_SDHC_PDMA_TXFIFO_TH GENMASK(28, 22)
+ #define MESON_SDHC_PDMA_RXFIFO_MANUAL_FLUSH GENMASK(30, 29)
+ #define MESON_SDHC_PDMA_TXFIFO_FILL BIT(31)
+
+#define MESON_SDHC_MISC 0x1c
+ #define MESON_SDHC_MISC_WCRC_ERR_PATT GENMASK(6, 4)
+ #define MESON_SDHC_MISC_WCRC_OK_PATT GENMASK(9, 7)
+ #define MESON_SDHC_MISC_BURST_NUM GENMASK(21, 16)
+ #define MESON_SDHC_MISC_THREAD_ID GENMASK(27, 22)
+ #define MESON_SDHC_MISC_MANUAL_STOP BIT(28)
+ #define MESON_SDHC_MISC_TXSTART_THRES GENMASK(31, 29)
+
+#define MESON_SDHC_DATA 0x20
+
+#define MESON_SDHC_ICTL 0x24
+ #define MESON_SDHC_ICTL_RESP_OK BIT(0)
+ #define MESON_SDHC_ICTL_RESP_TIMEOUT BIT(1)
+ #define MESON_SDHC_ICTL_RESP_ERR_CRC BIT(2)
+ #define MESON_SDHC_ICTL_RESP_OK_NOCLEAR BIT(3)
+ #define MESON_SDHC_ICTL_DATA_1PACK_OK BIT(4)
+ #define MESON_SDHC_ICTL_DATA_TIMEOUT BIT(5)
+ #define MESON_SDHC_ICTL_DATA_ERR_CRC BIT(6)
+ #define MESON_SDHC_ICTL_DATA_XFER_OK BIT(7)
+ #define MESON_SDHC_ICTL_RX_HIGHER BIT(8)
+ #define MESON_SDHC_ICTL_RX_LOWER BIT(9)
+ #define MESON_SDHC_ICTL_DAT1_IRQ BIT(10)
+ #define MESON_SDHC_ICTL_DMA_DONE BIT(11)
+ #define MESON_SDHC_ICTL_RXFIFO_FULL BIT(12)
+ #define MESON_SDHC_ICTL_TXFIFO_EMPTY BIT(13)
+ #define MESON_SDHC_ICTL_ADDI_DAT1_IRQ BIT(14)
+ #define MESON_SDHC_ICTL_ALL_IRQS GENMASK(14, 0)
+ #define MESON_SDHC_ICTL_DAT1_IRQ_DELAY GENMASK(17, 16)
+
+#define MESON_SDHC_ISTA 0x28
+ #define MESON_SDHC_ISTA_RESP_OK BIT(0)
+ #define MESON_SDHC_ISTA_RESP_TIMEOUT BIT(1)
+ #define MESON_SDHC_ISTA_RESP_ERR_CRC BIT(2)
+ #define MESON_SDHC_ISTA_RESP_OK_NOCLEAR BIT(3)
+ #define MESON_SDHC_ISTA_DATA_1PACK_OK BIT(4)
+ #define MESON_SDHC_ISTA_DATA_TIMEOUT BIT(5)
+ #define MESON_SDHC_ISTA_DATA_ERR_CRC BIT(6)
+ #define MESON_SDHC_ISTA_DATA_XFER_OK BIT(7)
+ #define MESON_SDHC_ISTA_RX_HIGHER BIT(8)
+ #define MESON_SDHC_ISTA_RX_LOWER BIT(9)
+ #define MESON_SDHC_ISTA_DAT1_IRQ BIT(10)
+ #define MESON_SDHC_ISTA_DMA_DONE BIT(11)
+ #define MESON_SDHC_ISTA_RXFIFO_FULL BIT(12)
+ #define MESON_SDHC_ISTA_TXFIFO_EMPTY BIT(13)
+ #define MESON_SDHC_ISTA_ADDI_DAT1_IRQ BIT(14)
+ #define MESON_SDHC_ISTA_ALL_IRQS GENMASK(14, 0)
+
+#define MESON_SDHC_SRST 0x2c
+ #define MESON_SDHC_SRST_MAIN_CTRL BIT(0)
+ #define MESON_SDHC_SRST_RXFIFO BIT(1)
+ #define MESON_SDHC_SRST_TXFIFO BIT(2)
+ #define MESON_SDHC_SRST_DPHY_RX BIT(3)
+ #define MESON_SDHC_SRST_DPHY_TX BIT(4)
+ #define MESON_SDHC_SRST_DMA_IF BIT(5)
+
+#define MESON_SDHC_ESTA 0x30
+ #define MESON_SDHC_ESTA_11_13 GENMASK(13, 11)
+
+#define MESON_SDHC_ENHC 0x34
+ #define MESON_SDHC_ENHC_MESON8M2_WRRSP_MODE BIT(0)
+ #define MESON_SDHC_ENHC_MESON8M2_CHK_WRRSP BIT(1)
+ #define MESON_SDHC_ENHC_MESON8M2_CHK_DMA BIT(2)
+ #define MESON_SDHC_ENHC_MESON8M2_DEBUG GENMASK(5, 3)
+ #define MESON_SDHC_ENHC_MESON6_RX_TIMEOUT GENMASK(7, 0)
+ #define MESON_SDHC_ENHC_MESON6_DMA_RD_RESP BIT(16)
+ #define MESON_SDHC_ENHC_MESON6_DMA_WR_RESP BIT(17)
+ #define MESON_SDHC_ENHC_SDIO_IRQ_PERIOD GENMASK(15, 8)
+ #define MESON_SDHC_ENHC_RXFIFO_TH GENMASK(24, 18)
+ #define MESON_SDHC_ENHC_TXFIFO_TH GENMASK(31, 25)
+
+#define MESON_SDHC_CLK2 0x38
+ #define MESON_SDHC_CLK2_RX_CLK_PHASE GENMASK(11, 0)
+ #define MESON_SDHC_CLK2_SD_CLK_PHASE GENMASK(23, 12)
+
+struct clk_bulk_data;
+
+int meson_mx_sdhc_register_clkc(struct device *dev, void __iomem *base,
+ struct clk_bulk_data *clk_bulk_data);
+
+#endif /* _MESON_MX_SDHC_H_ */
diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 360d523..264aae2 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -294,7 +294,7 @@
switch (ios->power_mode) {
case MMC_POWER_OFF:
vdd = 0;
- /* fall through */
+ fallthrough;
case MMC_POWER_UP:
if (!IS_ERR(mmc->supply.vmmc)) {
host->error = mmc_regulator_set_ocr(mmc,
@@ -564,7 +564,7 @@
mmc->f_max = clk_round_rate(host->cfg_div_clk,
clk_get_rate(host->parent_clk));
- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
+ mmc->caps |= MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
mmc->ops = &meson_mx_mmc_ops;
ret = mmc_of_parse(mmc);
@@ -632,7 +632,6 @@
struct platform_device *slot_pdev;
struct mmc_host *mmc;
struct meson_mx_mmc_host *host;
- struct resource *res;
int ret, irq;
u32 conf;
@@ -657,14 +656,18 @@
platform_set_drvdata(pdev, host);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->base = devm_ioremap_resource(host->controller_dev, res);
+ host->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->base)) {
ret = PTR_ERR(host->base);
goto error_free_mmc;
}
irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto error_free_mmc;
+ }
+
ret = devm_request_threaded_irq(host->controller_dev, irq,
meson_mx_mmc_irq,
meson_mx_mmc_irq_thread, IRQF_ONESHOT,
@@ -757,6 +760,7 @@
.remove = meson_mx_mmc_remove,
.driver = {
.name = "meson-mx-sdio",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(meson_mx_mmc_of_match),
},
};
diff --git a/drivers/mmc/host/mmc_hsq.c b/drivers/mmc/host/mmc_hsq.c
new file mode 100644
index 0000000..a5e05ed
--- /dev/null
+++ b/drivers/mmc/host/mmc_hsq.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *
+ * MMC software queue support based on command queue interfaces
+ *
+ * Copyright (C) 2019 Linaro, Inc.
+ * Author: Baolin Wang <baolin.wang@linaro.org>
+ */
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+
+#include "mmc_hsq.h"
+
+#define HSQ_NUM_SLOTS 64
+#define HSQ_INVALID_TAG HSQ_NUM_SLOTS
+
+static void mmc_hsq_retry_handler(struct work_struct *work)
+{
+ struct mmc_hsq *hsq = container_of(work, struct mmc_hsq, retry_work);
+ struct mmc_host *mmc = hsq->mmc;
+
+ mmc->ops->request(mmc, hsq->mrq);
+}
+
+static void mmc_hsq_pump_requests(struct mmc_hsq *hsq)
+{
+ struct mmc_host *mmc = hsq->mmc;
+ struct hsq_slot *slot;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&hsq->lock, flags);
+
+ /* Make sure we are not already running a request now */
+ if (hsq->mrq) {
+ spin_unlock_irqrestore(&hsq->lock, flags);
+ return;
+ }
+
+ /* Make sure there are remain requests need to pump */
+ if (!hsq->qcnt || !hsq->enabled) {
+ spin_unlock_irqrestore(&hsq->lock, flags);
+ return;
+ }
+
+ slot = &hsq->slot[hsq->next_tag];
+ hsq->mrq = slot->mrq;
+ hsq->qcnt--;
+
+ spin_unlock_irqrestore(&hsq->lock, flags);
+
+ if (mmc->ops->request_atomic)
+ ret = mmc->ops->request_atomic(mmc, hsq->mrq);
+ else
+ mmc->ops->request(mmc, hsq->mrq);
+
+ /*
+ * If returning BUSY from request_atomic(), which means the card
+ * may be busy now, and we should change to non-atomic context to
+ * try again for this unusual case, to avoid time-consuming operations
+ * in the atomic context.
+ *
+ * Note: we just give a warning for other error cases, since the host
+ * driver will handle them.
+ */
+ if (ret == -EBUSY)
+ schedule_work(&hsq->retry_work);
+ else
+ WARN_ON_ONCE(ret);
+}
+
+static void mmc_hsq_update_next_tag(struct mmc_hsq *hsq, int remains)
+{
+ struct hsq_slot *slot;
+ int tag;
+
+ /*
+ * If there are no remain requests in software queue, then set a invalid
+ * tag.
+ */
+ if (!remains) {
+ hsq->next_tag = HSQ_INVALID_TAG;
+ return;
+ }
+
+ /*
+ * Increasing the next tag and check if the corresponding request is
+ * available, if yes, then we found a candidate request.
+ */
+ if (++hsq->next_tag != HSQ_INVALID_TAG) {
+ slot = &hsq->slot[hsq->next_tag];
+ if (slot->mrq)
+ return;
+ }
+
+ /* Othersie we should iterate all slots to find a available tag. */
+ for (tag = 0; tag < HSQ_NUM_SLOTS; tag++) {
+ slot = &hsq->slot[tag];
+ if (slot->mrq)
+ break;
+ }
+
+ if (tag == HSQ_NUM_SLOTS)
+ tag = HSQ_INVALID_TAG;
+
+ hsq->next_tag = tag;
+}
+
+static void mmc_hsq_post_request(struct mmc_hsq *hsq)
+{
+ unsigned long flags;
+ int remains;
+
+ spin_lock_irqsave(&hsq->lock, flags);
+
+ remains = hsq->qcnt;
+ hsq->mrq = NULL;
+
+ /* Update the next available tag to be queued. */
+ mmc_hsq_update_next_tag(hsq, remains);
+
+ if (hsq->waiting_for_idle && !remains) {
+ hsq->waiting_for_idle = false;
+ wake_up(&hsq->wait_queue);
+ }
+
+ /* Do not pump new request in recovery mode. */
+ if (hsq->recovery_halt) {
+ spin_unlock_irqrestore(&hsq->lock, flags);
+ return;
+ }
+
+ spin_unlock_irqrestore(&hsq->lock, flags);
+
+ /*
+ * Try to pump new request to host controller as fast as possible,
+ * after completing previous request.
+ */
+ if (remains > 0)
+ mmc_hsq_pump_requests(hsq);
+}
+
+/**
+ * mmc_hsq_finalize_request - finalize one request if the request is done
+ * @mmc: the host controller
+ * @mrq: the request need to be finalized
+ *
+ * Return true if we finalized the corresponding request in software queue,
+ * otherwise return false.
+ */
+bool mmc_hsq_finalize_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hsq->lock, flags);
+
+ if (!hsq->enabled || !hsq->mrq || hsq->mrq != mrq) {
+ spin_unlock_irqrestore(&hsq->lock, flags);
+ return false;
+ }
+
+ /*
+ * Clear current completed slot request to make a room for new request.
+ */
+ hsq->slot[hsq->next_tag].mrq = NULL;
+
+ spin_unlock_irqrestore(&hsq->lock, flags);
+
+ mmc_cqe_request_done(mmc, hsq->mrq);
+
+ mmc_hsq_post_request(hsq);
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(mmc_hsq_finalize_request);
+
+static void mmc_hsq_recovery_start(struct mmc_host *mmc)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hsq->lock, flags);
+
+ hsq->recovery_halt = true;
+
+ spin_unlock_irqrestore(&hsq->lock, flags);
+}
+
+static void mmc_hsq_recovery_finish(struct mmc_host *mmc)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ int remains;
+
+ spin_lock_irq(&hsq->lock);
+
+ hsq->recovery_halt = false;
+ remains = hsq->qcnt;
+
+ spin_unlock_irq(&hsq->lock);
+
+ /*
+ * Try to pump new request if there are request pending in software
+ * queue after finishing recovery.
+ */
+ if (remains > 0)
+ mmc_hsq_pump_requests(hsq);
+}
+
+static int mmc_hsq_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ int tag = mrq->tag;
+
+ spin_lock_irq(&hsq->lock);
+
+ if (!hsq->enabled) {
+ spin_unlock_irq(&hsq->lock);
+ return -ESHUTDOWN;
+ }
+
+ /* Do not queue any new requests in recovery mode. */
+ if (hsq->recovery_halt) {
+ spin_unlock_irq(&hsq->lock);
+ return -EBUSY;
+ }
+
+ hsq->slot[tag].mrq = mrq;
+
+ /*
+ * Set the next tag as current request tag if no available
+ * next tag.
+ */
+ if (hsq->next_tag == HSQ_INVALID_TAG)
+ hsq->next_tag = tag;
+
+ hsq->qcnt++;
+
+ spin_unlock_irq(&hsq->lock);
+
+ mmc_hsq_pump_requests(hsq);
+
+ return 0;
+}
+
+static void mmc_hsq_post_req(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ if (mmc->ops->post_req)
+ mmc->ops->post_req(mmc, mrq, 0);
+}
+
+static bool mmc_hsq_queue_is_idle(struct mmc_hsq *hsq, int *ret)
+{
+ bool is_idle;
+
+ spin_lock_irq(&hsq->lock);
+
+ is_idle = (!hsq->mrq && !hsq->qcnt) ||
+ hsq->recovery_halt;
+
+ *ret = hsq->recovery_halt ? -EBUSY : 0;
+ hsq->waiting_for_idle = !is_idle;
+
+ spin_unlock_irq(&hsq->lock);
+
+ return is_idle;
+}
+
+static int mmc_hsq_wait_for_idle(struct mmc_host *mmc)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ int ret;
+
+ wait_event(hsq->wait_queue,
+ mmc_hsq_queue_is_idle(hsq, &ret));
+
+ return ret;
+}
+
+static void mmc_hsq_disable(struct mmc_host *mmc)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+ u32 timeout = 500;
+ int ret;
+
+ spin_lock_irq(&hsq->lock);
+
+ if (!hsq->enabled) {
+ spin_unlock_irq(&hsq->lock);
+ return;
+ }
+
+ spin_unlock_irq(&hsq->lock);
+
+ ret = wait_event_timeout(hsq->wait_queue,
+ mmc_hsq_queue_is_idle(hsq, &ret),
+ msecs_to_jiffies(timeout));
+ if (ret == 0) {
+ pr_warn("could not stop mmc software queue\n");
+ return;
+ }
+
+ spin_lock_irq(&hsq->lock);
+
+ hsq->enabled = false;
+
+ spin_unlock_irq(&hsq->lock);
+}
+
+static int mmc_hsq_enable(struct mmc_host *mmc, struct mmc_card *card)
+{
+ struct mmc_hsq *hsq = mmc->cqe_private;
+
+ spin_lock_irq(&hsq->lock);
+
+ if (hsq->enabled) {
+ spin_unlock_irq(&hsq->lock);
+ return -EBUSY;
+ }
+
+ hsq->enabled = true;
+
+ spin_unlock_irq(&hsq->lock);
+
+ return 0;
+}
+
+static const struct mmc_cqe_ops mmc_hsq_ops = {
+ .cqe_enable = mmc_hsq_enable,
+ .cqe_disable = mmc_hsq_disable,
+ .cqe_request = mmc_hsq_request,
+ .cqe_post_req = mmc_hsq_post_req,
+ .cqe_wait_for_idle = mmc_hsq_wait_for_idle,
+ .cqe_recovery_start = mmc_hsq_recovery_start,
+ .cqe_recovery_finish = mmc_hsq_recovery_finish,
+};
+
+int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc)
+{
+ hsq->num_slots = HSQ_NUM_SLOTS;
+ hsq->next_tag = HSQ_INVALID_TAG;
+
+ hsq->slot = devm_kcalloc(mmc_dev(mmc), hsq->num_slots,
+ sizeof(struct hsq_slot), GFP_KERNEL);
+ if (!hsq->slot)
+ return -ENOMEM;
+
+ hsq->mmc = mmc;
+ hsq->mmc->cqe_private = hsq;
+ mmc->cqe_ops = &mmc_hsq_ops;
+
+ INIT_WORK(&hsq->retry_work, mmc_hsq_retry_handler);
+ spin_lock_init(&hsq->lock);
+ init_waitqueue_head(&hsq->wait_queue);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mmc_hsq_init);
+
+void mmc_hsq_suspend(struct mmc_host *mmc)
+{
+ mmc_hsq_disable(mmc);
+}
+EXPORT_SYMBOL_GPL(mmc_hsq_suspend);
+
+int mmc_hsq_resume(struct mmc_host *mmc)
+{
+ return mmc_hsq_enable(mmc, NULL);
+}
+EXPORT_SYMBOL_GPL(mmc_hsq_resume);
+
+MODULE_DESCRIPTION("MMC Host Software Queue support");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/mmc_hsq.h b/drivers/mmc/host/mmc_hsq.h
new file mode 100644
index 0000000..ffdd9cd
--- /dev/null
+++ b/drivers/mmc/host/mmc_hsq.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LINUX_MMC_HSQ_H
+#define LINUX_MMC_HSQ_H
+
+struct hsq_slot {
+ struct mmc_request *mrq;
+};
+
+struct mmc_hsq {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ wait_queue_head_t wait_queue;
+ struct hsq_slot *slot;
+ spinlock_t lock;
+ struct work_struct retry_work;
+
+ int next_tag;
+ int num_slots;
+ int qcnt;
+
+ bool enabled;
+ bool waiting_for_idle;
+ bool recovery_halt;
+};
+
+int mmc_hsq_init(struct mmc_hsq *hsq, struct mmc_host *mmc);
+void mmc_hsq_suspend(struct mmc_host *mmc);
+int mmc_hsq_resume(struct mmc_host *mmc);
+bool mmc_hsq_finalize_request(struct mmc_host *mmc, struct mmc_request *mrq);
+
+#endif
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 7083d8d..02f4fd2 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -77,14 +77,8 @@
#define MMC_SPI_BLOCKSIZE 512
-
-/* These fixed timeouts come from the latest SD specs, which say to ignore
- * the CSD values. The R1B value is for card erase (e.g. the "I forgot the
- * card's password" scenario); it's mostly applied to STOP_TRANSMISSION after
- * reads which takes nowhere near that long. Older cards may be able to use
- * shorter timeouts ... but why bother?
- */
-#define r1b_timeout (HZ * 3)
+#define MMC_SPI_R1B_TIMEOUT_MS 3000
+#define MMC_SPI_INIT_TIMEOUT_MS 3000
/* One of the critical speed parameters is the amount of data which may
* be transferred in one command. If this value is too low, the SD card
@@ -248,6 +242,7 @@
static int mmc_spi_response_get(struct mmc_spi_host *host,
struct mmc_command *cmd, int cs_on)
{
+ unsigned long timeout_ms;
u8 *cp = host->data->status;
u8 *end = cp + host->t.len;
int value = 0;
@@ -346,8 +341,11 @@
/* maybe we read all the busy tokens already */
while (cp < end && *cp == 0)
cp++;
- if (cp == end)
- mmc_spi_wait_unbusy(host, r1b_timeout);
+ if (cp == end) {
+ timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+ MMC_SPI_R1B_TIMEOUT_MS;
+ mmc_spi_wait_unbusy(host, msecs_to_jiffies(timeout_ms));
+ }
break;
/* SPI R2 == R1 + second status byte; SEND_STATUS
@@ -884,9 +882,9 @@
else
clock_rate = spi->max_speed_hz;
- timeout = data->timeout_ns +
+ timeout = data->timeout_ns / 1000 +
data->timeout_clks * 1000000 / clock_rate;
- timeout = usecs_to_jiffies((unsigned int)(timeout / 1000)) + 1;
+ timeout = usecs_to_jiffies((unsigned int)timeout) + 1;
/* Handle scatterlist segments one at a time, with synch for
* each 512-byte block
@@ -1118,7 +1116,7 @@
/* Try to be very sure any previous command has completed;
* wait till not-busy, skip debris from any old commands.
*/
- mmc_spi_wait_unbusy(host, r1b_timeout);
+ mmc_spi_wait_unbusy(host, msecs_to_jiffies(MMC_SPI_INIT_TIMEOUT_MS));
mmc_spi_readbytes(host, 10);
/*
@@ -1280,6 +1278,52 @@
return IRQ_HANDLED;
}
+#ifdef CONFIG_HAS_DMA
+static int mmc_spi_dma_alloc(struct mmc_spi_host *host)
+{
+ struct spi_device *spi = host->spi;
+ struct device *dev;
+
+ if (!spi->master->dev.parent->dma_mask)
+ return 0;
+
+ dev = spi->master->dev.parent;
+
+ host->ones_dma = dma_map_single(dev, host->ones, MMC_SPI_BLOCKSIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, host->ones_dma))
+ return -ENOMEM;
+
+ host->data_dma = dma_map_single(dev, host->data, sizeof(*host->data),
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(dev, host->data_dma)) {
+ dma_unmap_single(dev, host->ones_dma, MMC_SPI_BLOCKSIZE,
+ DMA_TO_DEVICE);
+ return -ENOMEM;
+ }
+
+ dma_sync_single_for_cpu(dev, host->data_dma, sizeof(*host->data),
+ DMA_BIDIRECTIONAL);
+
+ host->dma_dev = dev;
+ return 0;
+}
+
+static void mmc_spi_dma_free(struct mmc_spi_host *host)
+{
+ if (!host->dma_dev)
+ return;
+
+ dma_unmap_single(host->dma_dev, host->ones_dma, MMC_SPI_BLOCKSIZE,
+ DMA_TO_DEVICE);
+ dma_unmap_single(host->dma_dev, host->data_dma, sizeof(*host->data),
+ DMA_BIDIRECTIONAL);
+}
+#else
+static inline int mmc_spi_dma_alloc(struct mmc_spi_host *host) { return 0; }
+static inline void mmc_spi_dma_free(struct mmc_spi_host *host) {}
+#endif
+
static int mmc_spi_probe(struct spi_device *spi)
{
void *ones;
@@ -1376,23 +1420,9 @@
if (!host->data)
goto fail_nobuf1;
- if (spi->master->dev.parent->dma_mask) {
- struct device *dev = spi->master->dev.parent;
-
- host->dma_dev = dev;
- host->ones_dma = dma_map_single(dev, ones,
- MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(dev, host->ones_dma))
- goto fail_ones_dma;
- host->data_dma = dma_map_single(dev, host->data,
- sizeof(*host->data), DMA_BIDIRECTIONAL);
- if (dma_mapping_error(dev, host->data_dma))
- goto fail_data_dma;
-
- dma_sync_single_for_cpu(host->dma_dev,
- host->data_dma, sizeof(*host->data),
- DMA_BIDIRECTIONAL);
- }
+ status = mmc_spi_dma_alloc(host);
+ if (status)
+ goto fail_dma;
/* setup message for status/busy readback */
spi_message_init(&host->readback);
@@ -1426,7 +1456,7 @@
* Index 0 is card detect
* Old boardfiles were specifying 1 ms as debounce
*/
- status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1, NULL);
+ status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1000);
if (status == -EPROBE_DEFER)
goto fail_add_host;
if (!status) {
@@ -1441,7 +1471,7 @@
mmc_detect_change(mmc, 0);
/* Index 1 is write protect/read only */
- status = mmc_gpiod_request_ro(mmc, NULL, 1, 0, NULL);
+ status = mmc_gpiod_request_ro(mmc, NULL, 1, 0);
if (status == -EPROBE_DEFER)
goto fail_add_host;
if (!status)
@@ -1460,20 +1490,12 @@
fail_add_host:
mmc_remove_host(mmc);
fail_glue_init:
- if (host->dma_dev)
- dma_unmap_single(host->dma_dev, host->data_dma,
- sizeof(*host->data), DMA_BIDIRECTIONAL);
-fail_data_dma:
- if (host->dma_dev)
- dma_unmap_single(host->dma_dev, host->ones_dma,
- MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
-fail_ones_dma:
+ mmc_spi_dma_free(host);
+fail_dma:
kfree(host->data);
-
fail_nobuf1:
mmc_free_host(mmc);
mmc_spi_put_pdata(spi);
-
nomem:
kfree(ones);
return status;
@@ -1491,13 +1513,7 @@
mmc_remove_host(mmc);
- if (host->dma_dev) {
- dma_unmap_single(host->dma_dev, host->ones_dma,
- MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
- dma_unmap_single(host->dma_dev, host->data_dma,
- sizeof(*host->data), DMA_BIDIRECTIONAL);
- }
-
+ mmc_spi_dma_free(host);
kfree(host->data);
kfree(host->ones);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7e4bc91..9bde0de 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -22,6 +22,7 @@
#include <linux/mmc/pm.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/sd.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/amba/bus.h>
#include <linux/clk.h>
@@ -44,6 +45,7 @@
#define DRIVER_NAME "mmci-pl18x"
static void mmci_variant_init(struct mmci_host *host);
+static void ux500_variant_init(struct mmci_host *host);
static void ux500v2_variant_init(struct mmci_host *host);
static unsigned int fmax = 515633;
@@ -186,7 +188,7 @@
.irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
- .init = mmci_variant_init,
+ .init = ux500_variant_init,
};
static struct variant_data variant_ux500v2 = {
@@ -265,7 +267,39 @@
.datalength_bits = 25,
.datactrl_blocksz = 14,
.datactrl_any_blocksz = true,
+ .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.stm32_idmabsize_mask = GENMASK(12, 5),
+ .busy_timeout = true,
+ .busy_detect = true,
+ .busy_detect_flag = MCI_STM32_BUSYD0,
+ .busy_detect_mask = MCI_STM32_BUSYD0ENDMASK,
+ .init = sdmmc_variant_init,
+};
+
+static struct variant_data variant_stm32_sdmmcv2 = {
+ .fifosize = 16 * 4,
+ .fifohalfsize = 8 * 4,
+ .f_max = 208000000,
+ .stm32_clkdiv = true,
+ .cmdreg_cpsm_enable = MCI_CPSM_STM32_ENABLE,
+ .cmdreg_lrsp_crc = MCI_CPSM_STM32_LRSP_CRC,
+ .cmdreg_srsp_crc = MCI_CPSM_STM32_SRSP_CRC,
+ .cmdreg_srsp = MCI_CPSM_STM32_SRSP,
+ .cmdreg_stop = MCI_CPSM_STM32_CMDSTOP,
+ .data_cmd_enable = MCI_CPSM_STM32_CMDTRANS,
+ .irq_pio_mask = MCI_IRQ_PIO_STM32_MASK,
+ .datactrl_first = true,
+ .datacnt_useless = true,
+ .datalength_bits = 25,
+ .datactrl_blocksz = 14,
+ .datactrl_any_blocksz = true,
+ .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
+ .stm32_idmabsize_mask = GENMASK(16, 5),
+ .dma_lli = true,
+ .busy_timeout = true,
+ .busy_detect = true,
+ .busy_detect_flag = MCI_STM32_BUSYD0,
+ .busy_detect_mask = MCI_STM32_BUSYD0ENDMASK,
.init = sdmmc_variant_init,
};
@@ -425,7 +459,7 @@
mmci_write_clkreg(host, clk);
}
-void mmci_dma_release(struct mmci_host *host)
+static void mmci_dma_release(struct mmci_host *host)
{
if (host->ops && host->ops->dma_release)
host->ops->dma_release(host);
@@ -433,7 +467,7 @@
host->use_dma = false;
}
-void mmci_dma_setup(struct mmci_host *host)
+static void mmci_dma_setup(struct mmci_host *host)
{
if (!host->ops || !host->ops->dma_setup)
return;
@@ -469,7 +503,7 @@
return 0;
}
-int mmci_prep_data(struct mmci_host *host, struct mmc_data *data, bool next)
+static int mmci_prep_data(struct mmci_host *host, struct mmc_data *data, bool next)
{
int err;
@@ -485,7 +519,7 @@
return err;
}
-void mmci_unprep_data(struct mmci_host *host, struct mmc_data *data,
+static void mmci_unprep_data(struct mmci_host *host, struct mmc_data *data,
int err)
{
if (host->ops && host->ops->unprep_data)
@@ -494,7 +528,7 @@
data->host_cookie = 0;
}
-void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
+static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
{
WARN_ON(data->host_cookie && data->host_cookie != host->next_cookie);
@@ -502,7 +536,7 @@
host->ops->get_next_data(host, data);
}
-int mmci_dma_start(struct mmci_host *host, unsigned int datactrl)
+static int mmci_dma_start(struct mmci_host *host, unsigned int datactrl)
{
struct mmc_data *data = host->data;
int ret;
@@ -539,7 +573,7 @@
return 0;
}
-void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
+static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data)
{
if (!host->use_dma)
return;
@@ -548,7 +582,7 @@
host->ops->dma_finalize(host, data);
}
-void mmci_dma_error(struct mmci_host *host)
+static void mmci_dma_error(struct mmci_host *host)
{
if (!host->use_dma)
return;
@@ -619,6 +653,67 @@
return MCI_DPSM_ENABLE | (host->data->blksz << 16);
}
+static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
+{
+ void __iomem *base = host->base;
+
+ /*
+ * Before unmasking for the busy end IRQ, confirm that the
+ * command was sent successfully. To keep track of having a
+ * command in-progress, waiting for busy signaling to end,
+ * store the status in host->busy_status.
+ *
+ * Note that, the card may need a couple of clock cycles before
+ * it starts signaling busy on DAT0, hence re-read the
+ * MMCISTATUS register here, to allow the busy bit to be set.
+ * Potentially we may even need to poll the register for a
+ * while, to allow it to be set, but tests indicates that it
+ * isn't needed.
+ */
+ if (!host->busy_status && !(status & err_msk) &&
+ (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {
+ writel(readl(base + MMCIMASK0) |
+ host->variant->busy_detect_mask,
+ base + MMCIMASK0);
+
+ host->busy_status = status & (MCI_CMDSENT | MCI_CMDRESPEND);
+ return false;
+ }
+
+ /*
+ * If there is a command in-progress that has been successfully
+ * sent, then bail out if busy status is set and wait for the
+ * busy end IRQ.
+ *
+ * Note that, the HW triggers an IRQ on both edges while
+ * monitoring DAT0 for busy completion, but there is only one
+ * status bit in MMCISTATUS for the busy state. Therefore
+ * both the start and the end interrupts needs to be cleared,
+ * one after the other. So, clear the busy start IRQ here.
+ */
+ if (host->busy_status &&
+ (status & host->variant->busy_detect_flag)) {
+ writel(host->variant->busy_detect_mask, base + MMCICLEAR);
+ return false;
+ }
+
+ /*
+ * If there is a command in-progress that has been successfully
+ * sent and the busy bit isn't set, it means we have received
+ * the busy end IRQ. Clear and mask the IRQ, then continue to
+ * process the command.
+ */
+ if (host->busy_status) {
+ writel(host->variant->busy_detect_mask, base + MMCICLEAR);
+
+ writel(readl(base + MMCIMASK0) &
+ ~host->variant->busy_detect_mask, base + MMCIMASK0);
+ host->busy_status = 0;
+ }
+
+ return true;
+}
+
/*
* All the DMA operation mode stuff goes inside this ifdef.
* This assumes that you have a generic DMA device interface,
@@ -649,10 +744,20 @@
host->dma_priv = dmae;
- dmae->rx_channel = dma_request_slave_channel(mmc_dev(host->mmc),
- "rx");
- dmae->tx_channel = dma_request_slave_channel(mmc_dev(host->mmc),
- "tx");
+ dmae->rx_channel = dma_request_chan(mmc_dev(host->mmc), "rx");
+ if (IS_ERR(dmae->rx_channel)) {
+ int ret = PTR_ERR(dmae->rx_channel);
+ dmae->rx_channel = NULL;
+ return ret;
+ }
+
+ dmae->tx_channel = dma_request_chan(mmc_dev(host->mmc), "tx");
+ if (IS_ERR(dmae->tx_channel)) {
+ if (PTR_ERR(dmae->tx_channel) == -EPROBE_DEFER)
+ dev_warn(mmc_dev(host->mmc),
+ "Deferred probe for TX channel ignored\n");
+ dmae->tx_channel = NULL;
+ }
/*
* If only an RX channel is specified, the driver will
@@ -974,14 +1079,21 @@
};
#endif
-void mmci_variant_init(struct mmci_host *host)
+static void mmci_variant_init(struct mmci_host *host)
{
host->ops = &mmci_variant_ops;
}
-void ux500v2_variant_init(struct mmci_host *host)
+static void ux500_variant_init(struct mmci_host *host)
{
host->ops = &mmci_variant_ops;
+ host->ops->busy_complete = ux500_busy_complete;
+}
+
+static void ux500v2_variant_init(struct mmci_host *host)
+{
+ host->ops = &mmci_variant_ops;
+ host->ops->busy_complete = ux500_busy_complete;
host->ops->get_datactrl_cfg = ux500v2_get_dctrl_cfg;
}
@@ -1101,6 +1213,7 @@
mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
{
void __iomem *base = host->base;
+ unsigned long long clks;
dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
@@ -1123,6 +1236,23 @@
else
c |= host->variant->cmdreg_srsp;
}
+
+ if (host->variant->busy_timeout && cmd->flags & MMC_RSP_BUSY) {
+ if (!cmd->busy_timeout)
+ cmd->busy_timeout = 10 * MSEC_PER_SEC;
+
+ if (cmd->busy_timeout > host->mmc->max_busy_timeout)
+ clks = (unsigned long long)host->mmc->max_busy_timeout * host->cclk;
+ else
+ clks = (unsigned long long)cmd->busy_timeout * host->cclk;
+
+ do_div(clks, MSEC_PER_SEC);
+ writel_relaxed(clks, host->base + MMCIDATATIMER);
+ }
+
+ if (host->ops->pre_sig_volt_switch && cmd->opcode == SD_SWITCH_VOLTAGE)
+ host->ops->pre_sig_volt_switch(host);
+
if (/*interrupt*/0)
c |= MCI_CPSM_INTERRUPT;
@@ -1227,6 +1357,7 @@
mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
unsigned int status)
{
+ u32 err_msk = MCI_CMDCRCFAIL | MCI_CMDTIMEOUT;
void __iomem *base = host->base;
bool sbc, busy_resp;
@@ -1241,74 +1372,17 @@
* handling. Note that we tag on any latent IRQs postponed
* due to waiting for busy status.
*/
- if (!((status|host->busy_status) &
- (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND)))
+ if (host->variant->busy_timeout && busy_resp)
+ err_msk |= MCI_DATATIMEOUT;
+
+ if (!((status | host->busy_status) &
+ (err_msk | MCI_CMDSENT | MCI_CMDRESPEND)))
return;
/* Handle busy detection on DAT0 if the variant supports it. */
- if (busy_resp && host->variant->busy_detect) {
-
- /*
- * Before unmasking for the busy end IRQ, confirm that the
- * command was sent successfully. To keep track of having a
- * command in-progress, waiting for busy signaling to end,
- * store the status in host->busy_status.
- *
- * Note that, the card may need a couple of clock cycles before
- * it starts signaling busy on DAT0, hence re-read the
- * MMCISTATUS register here, to allow the busy bit to be set.
- * Potentially we may even need to poll the register for a
- * while, to allow it to be set, but tests indicates that it
- * isn't needed.
- */
- if (!host->busy_status &&
- !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) &&
- (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {
-
- writel(readl(base + MMCIMASK0) |
- host->variant->busy_detect_mask,
- base + MMCIMASK0);
-
- host->busy_status =
- status & (MCI_CMDSENT|MCI_CMDRESPEND);
+ if (busy_resp && host->variant->busy_detect)
+ if (!host->ops->busy_complete(host, status, err_msk))
return;
- }
-
- /*
- * If there is a command in-progress that has been successfully
- * sent, then bail out if busy status is set and wait for the
- * busy end IRQ.
- *
- * Note that, the HW triggers an IRQ on both edges while
- * monitoring DAT0 for busy completion, but there is only one
- * status bit in MMCISTATUS for the busy state. Therefore
- * both the start and the end interrupts needs to be cleared,
- * one after the other. So, clear the busy start IRQ here.
- */
- if (host->busy_status &&
- (status & host->variant->busy_detect_flag)) {
- writel(host->variant->busy_detect_mask,
- host->base + MMCICLEAR);
- return;
- }
-
- /*
- * If there is a command in-progress that has been successfully
- * sent and the busy bit isn't set, it means we have received
- * the busy end IRQ. Clear and mask the IRQ, then continue to
- * process the command.
- */
- if (host->busy_status) {
-
- writel(host->variant->busy_detect_mask,
- host->base + MMCICLEAR);
-
- writel(readl(base + MMCIMASK0) &
- ~host->variant->busy_detect_mask,
- base + MMCIMASK0);
- host->busy_status = 0;
- }
- }
host->cmd = NULL;
@@ -1316,6 +1390,10 @@
cmd->error = -ETIMEDOUT;
} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
cmd->error = -EILSEQ;
+ } else if (host->variant->busy_timeout && busy_resp &&
+ status & MCI_DATATIMEOUT) {
+ cmd->error = -ETIMEDOUT;
+ host->irq_action = IRQ_WAKE_THREAD;
} else {
cmd->resp[0] = readl(base + MMCIRESPONSE0);
cmd->resp[1] = readl(base + MMCIRESPONSE1);
@@ -1334,7 +1412,10 @@
return;
}
}
- mmci_request_end(host, host->mrq);
+
+ if (host->irq_action != IRQ_WAKE_THREAD)
+ mmci_request_end(host, host->mrq);
+
} else if (sbc) {
mmci_start_command(host, host->mrq->cmd, 0);
} else if (!host->variant->datactrl_first &&
@@ -1527,9 +1608,9 @@
{
struct mmci_host *host = dev_id;
u32 status;
- int ret = 0;
spin_lock(&host->lock);
+ host->irq_action = IRQ_HANDLED;
do {
status = readl(host->base + MMCISTATUS);
@@ -1569,12 +1650,41 @@
if (host->variant->busy_detect_flag)
status &= ~host->variant->busy_detect_flag;
- ret = 1;
} while (status);
spin_unlock(&host->lock);
- return IRQ_RETVAL(ret);
+ return host->irq_action;
+}
+
+/*
+ * mmci_irq_thread() - A threaded IRQ handler that manages a reset of the HW.
+ *
+ * A reset is needed for some variants, where a datatimeout for a R1B request
+ * causes the DPSM to stay busy (non-functional).
+ */
+static irqreturn_t mmci_irq_thread(int irq, void *dev_id)
+{
+ struct mmci_host *host = dev_id;
+ unsigned long flags;
+
+ if (host->rst) {
+ reset_control_assert(host->rst);
+ udelay(2);
+ reset_control_deassert(host->rst);
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+ writel(host->clk_reg, host->base + MMCICLOCK);
+ writel(host->pwr_reg, host->base + MMCIPOWER);
+ writel(MCI_IRQENABLE | host->variant->start_err,
+ host->base + MMCIMASK0);
+
+ host->irq_action = IRQ_HANDLED;
+ mmci_request_end(host, host->mrq);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return host->irq_action;
}
static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
@@ -1609,6 +1719,20 @@
spin_unlock_irqrestore(&host->lock, flags);
}
+static void mmci_set_max_busy_timeout(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+ u32 max_busy_timeout = 0;
+
+ if (!host->variant->busy_detect)
+ return;
+
+ if (host->variant->busy_timeout && mmc->actual_clock)
+ max_busy_timeout = ~0UL / (mmc->actual_clock / MSEC_PER_SEC);
+
+ mmc->max_busy_timeout = max_busy_timeout;
+}
+
static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmci_host *host = mmc_priv(mmc);
@@ -1685,7 +1809,7 @@
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
pinctrl_select_state(host->pinctrl, host->pins_opendrain);
else
- pinctrl_select_state(host->pinctrl, host->pins_default);
+ pinctrl_select_default_state(mmc_dev(mmc));
}
/*
@@ -1713,6 +1837,8 @@
else
mmci_set_clkreg(host, ios->clock);
+ mmci_set_max_busy_timeout(mmc);
+
if (host->ops && host->ops->set_pwrreg)
host->ops->set_pwrreg(host, pwr);
else
@@ -1740,28 +1866,18 @@
static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
{
- int ret = 0;
+ struct mmci_host *host = mmc_priv(mmc);
+ int ret;
- if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = mmc_regulator_set_vqmmc(mmc, ios);
- switch (ios->signal_voltage) {
- case MMC_SIGNAL_VOLTAGE_330:
- ret = regulator_set_voltage(mmc->supply.vqmmc,
- 2700000, 3600000);
- break;
- case MMC_SIGNAL_VOLTAGE_180:
- ret = regulator_set_voltage(mmc->supply.vqmmc,
- 1700000, 1950000);
- break;
- case MMC_SIGNAL_VOLTAGE_120:
- ret = regulator_set_voltage(mmc->supply.vqmmc,
- 1100000, 1300000);
- break;
- }
+ if (!ret && host->ops && host->ops->post_sig_volt_switch)
+ ret = host->ops->post_sig_volt_switch(host, ios);
+ else if (ret)
+ ret = 0;
- if (ret)
- dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
- }
+ if (ret < 0)
+ dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
return ret;
}
@@ -1843,6 +1959,8 @@
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->mmc_ops = &mmci_ops;
+ mmc->ops = &mmci_ops;
/*
* Some variant (STM32) doesn't have opendrain bit, nevertheless
@@ -1856,14 +1974,6 @@
goto host_free;
}
- host->pins_default = pinctrl_lookup_state(host->pinctrl,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(host->pins_default)) {
- dev_err(mmc_dev(mmc), "Can't select default pins\n");
- ret = PTR_ERR(host->pins_default);
- goto host_free;
- }
-
host->pins_opendrain = pinctrl_lookup_state(host->pinctrl,
MMCI_PINCTRL_STATE_OPENDRAIN);
if (IS_ERR(host->pins_opendrain)) {
@@ -1983,16 +2093,17 @@
mmci_write_datactrlreg(host,
host->variant->busy_dpsm_flag);
mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
- mmc->max_busy_timeout = 0;
}
+ /* Variants with mandatory busy timeout in HW needs R1B responses. */
+ if (variant->busy_timeout)
+ mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+
/* Prepare a CMD12 - needed to clear the DPSM on some variants. */
host->stop_abort.opcode = MMC_STOP_TRANSMISSION;
host->stop_abort.arg = 0;
host->stop_abort.flags = MMC_RSP_R1B | MMC_CMD_AC;
- mmc->ops = &mmci_ops;
-
/* We support these PM capabilities. */
mmc->pm_caps |= MMC_PM_KEEP_POWER;
@@ -2042,17 +2153,18 @@
* silently of these do not exist
*/
if (!np) {
- ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
if (ret == -EPROBE_DEFER)
goto clk_disable;
- ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL);
+ ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0);
if (ret == -EPROBE_DEFER)
goto clk_disable;
}
- ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED,
- DRIVER_NAME " (cmd)", host);
+ ret = devm_request_threaded_irq(&dev->dev, dev->irq[0], mmci_irq,
+ mmci_irq_thread, IRQF_SHARED,
+ DRIVER_NAME " (cmd)", host);
if (ret)
goto clk_disable;
@@ -2183,7 +2295,7 @@
struct mmci_host *host = mmc_priv(mmc);
clk_prepare_enable(host->clk);
mmci_restore(host);
- pinctrl_pm_select_default_state(dev);
+ pinctrl_select_default_state(dev);
}
return 0;
@@ -2253,6 +2365,11 @@
.mask = 0xf0ffffff,
.data = &variant_stm32_sdmmc,
},
+ {
+ .id = 0x00253180,
+ .mask = 0xf0ffffff,
+ .data = &variant_stm32_sdmmcv2,
+ },
/* Qualcomm variants */
{
.id = 0x00051180,
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 89ab733..e1a9b96 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -164,6 +164,8 @@
#define MCI_ST_CARDBUSY (1 << 24)
/* Extended status bits for the STM32 variants */
#define MCI_STM32_BUSYD0 BIT(20)
+#define MCI_STM32_BUSYD0END BIT(21)
+#define MCI_STM32_VSWEND BIT(25)
#define MMCICLEAR 0x038
#define MCI_CMDCRCFAILCLR (1 << 0)
@@ -181,6 +183,9 @@
#define MCI_ST_SDIOITC (1 << 22)
#define MCI_ST_CEATAENDC (1 << 23)
#define MCI_ST_BUSYENDC (1 << 24)
+/* Extended clear bits for the STM32 variants */
+#define MCI_STM32_VSWENDC BIT(25)
+#define MCI_STM32_CKSTOPC BIT(26)
#define MMCIMASK0 0x03c
#define MCI_CMDCRCFAILMASK (1 << 0)
@@ -291,6 +296,8 @@
* @signal_direction: input/out direction of bus signals can be indicated
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
* @busy_detect: true if the variant supports busy detection on DAT0.
+ * @busy_timeout: true if the variant starts data timer when the DPSM
+ * enter in Wait_R or Busy state.
* @busy_dpsm_flag: bitmask enabling busy detection in the DPSM
* @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register
* indicating that the card is busy
@@ -339,6 +346,7 @@
u8 signal_direction:1;
u8 pwrreg_clkgate:1;
u8 busy_detect:1;
+ u8 busy_timeout:1;
u32 busy_dpsm_flag;
u32 busy_detect_flag;
u32 busy_detect_mask;
@@ -372,6 +380,9 @@
void (*dma_error)(struct mmci_host *host);
void (*set_clkreg)(struct mmci_host *host, unsigned int desired);
void (*set_pwrreg)(struct mmci_host *host, unsigned int pwr);
+ bool (*busy_complete)(struct mmci_host *host, u32 status, u32 err_msk);
+ void (*pre_sig_volt_switch)(struct mmci_host *host);
+ int (*post_sig_volt_switch)(struct mmci_host *host, struct mmc_ios *ios);
};
struct mmci_host {
@@ -402,10 +413,11 @@
u32 mask1_reg;
u8 vqmmc_enabled:1;
struct mmci_platform_data *plat;
+ struct mmc_host_ops *mmc_ops;
struct mmci_host_ops *ops;
struct variant_data *variant;
+ void *variant_priv;
struct pinctrl *pinctrl;
- struct pinctrl_state *pins_default;
struct pinctrl_state *pins_opendrain;
u8 hw_designer;
@@ -413,6 +425,7 @@
struct timer_list timer;
unsigned int oldstat;
+ u32 irq_action;
/* pio stuff */
struct sg_mapping_iter sg_miter;
diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index 0953bd8..a75d3dd 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -3,10 +3,13 @@
* Copyright (C) STMicroelectronics 2018 - All Rights Reserved
* Author: Ludovic.barre@st.com for STMicroelectronics.
*/
+#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/of_address.h>
#include <linux/reset.h>
#include <linux/scatterlist.h>
#include "mmci.h"
@@ -14,19 +17,42 @@
#define SDMMC_LLI_BUF_LEN PAGE_SIZE
#define SDMMC_IDMA_BURST BIT(MMCI_STM32_IDMABNDT_SHIFT)
+#define DLYB_CR 0x0
+#define DLYB_CR_DEN BIT(0)
+#define DLYB_CR_SEN BIT(1)
+
+#define DLYB_CFGR 0x4
+#define DLYB_CFGR_SEL_MASK GENMASK(3, 0)
+#define DLYB_CFGR_UNIT_MASK GENMASK(14, 8)
+#define DLYB_CFGR_LNG_MASK GENMASK(27, 16)
+#define DLYB_CFGR_LNGF BIT(31)
+
+#define DLYB_NB_DELAY 11
+#define DLYB_CFGR_SEL_MAX (DLYB_NB_DELAY + 1)
+#define DLYB_CFGR_UNIT_MAX 127
+
+#define DLYB_LNG_TIMEOUT_US 1000
+#define SDMMC_VSWEND_TIMEOUT_US 10000
+
struct sdmmc_lli_desc {
u32 idmalar;
u32 idmabase;
u32 idmasize;
};
-struct sdmmc_priv {
+struct sdmmc_idma {
dma_addr_t sg_dma;
void *sg_cpu;
};
-int sdmmc_idma_validate_data(struct mmci_host *host,
- struct mmc_data *data)
+struct sdmmc_dlyb {
+ void __iomem *base;
+ u32 unit;
+ u32 max;
+};
+
+static int sdmmc_idma_validate_data(struct mmci_host *host,
+ struct mmc_data *data)
{
struct scatterlist *sg;
int i;
@@ -36,8 +62,8 @@
* excepted the last element which has no constraint on idmasize
*/
for_each_sg(data->sg, sg, data->sg_len - 1, i) {
- if (!IS_ALIGNED(sg_dma_address(data->sg), sizeof(u32)) ||
- !IS_ALIGNED(sg_dma_len(data->sg), SDMMC_IDMA_BURST)) {
+ if (!IS_ALIGNED(data->sg->offset, sizeof(u32)) ||
+ !IS_ALIGNED(data->sg->length, SDMMC_IDMA_BURST)) {
dev_err(mmc_dev(host->mmc),
"unaligned scatterlist: ofst:%x length:%d\n",
data->sg->offset, data->sg->length);
@@ -45,7 +71,7 @@
}
}
- if (!IS_ALIGNED(sg_dma_address(data->sg), sizeof(u32))) {
+ if (!IS_ALIGNED(data->sg->offset, sizeof(u32))) {
dev_err(mmc_dev(host->mmc),
"unaligned last scatterlist: ofst:%x length:%d\n",
data->sg->offset, data->sg->length);
@@ -92,21 +118,20 @@
static int sdmmc_idma_setup(struct mmci_host *host)
{
- struct sdmmc_priv *idma;
+ struct sdmmc_idma *idma;
+ struct device *dev = mmc_dev(host->mmc);
- idma = devm_kzalloc(mmc_dev(host->mmc), sizeof(*idma), GFP_KERNEL);
+ idma = devm_kzalloc(dev, sizeof(*idma), GFP_KERNEL);
if (!idma)
return -ENOMEM;
host->dma_priv = idma;
if (host->variant->dma_lli) {
- idma->sg_cpu = dmam_alloc_coherent(mmc_dev(host->mmc),
- SDMMC_LLI_BUF_LEN,
+ idma->sg_cpu = dmam_alloc_coherent(dev, SDMMC_LLI_BUF_LEN,
&idma->sg_dma, GFP_KERNEL);
if (!idma->sg_cpu) {
- dev_err(mmc_dev(host->mmc),
- "Failed to alloc IDMA descriptor\n");
+ dev_err(dev, "Failed to alloc IDMA descriptor\n");
return -ENOMEM;
}
host->mmc->max_segs = SDMMC_LLI_BUF_LEN /
@@ -117,13 +142,13 @@
host->mmc->max_seg_size = host->mmc->max_req_size;
}
- return 0;
+ return dma_set_max_seg_size(dev, host->mmc->max_seg_size);
}
static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl)
{
- struct sdmmc_priv *idma = host->dma_priv;
+ struct sdmmc_idma *idma = host->dma_priv;
struct sdmmc_lli_desc *desc = (struct sdmmc_lli_desc *)idma->sg_cpu;
struct mmc_data *data = host->data;
struct scatterlist *sg;
@@ -229,12 +254,25 @@
mmci_write_clkreg(host, clk);
}
+static void sdmmc_dlyb_input_ck(struct sdmmc_dlyb *dlyb)
+{
+ if (!dlyb || !dlyb->base)
+ return;
+
+ /* Output clock = Input clock */
+ writel_relaxed(0, dlyb->base + DLYB_CR);
+}
+
static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr)
{
struct mmc_ios ios = host->mmc->ios;
+ struct sdmmc_dlyb *dlyb = host->variant_priv;
+ /* adds OF options */
pwr = host->pwr_reg_add;
+ sdmmc_dlyb_input_ck(dlyb);
+
if (ios.power_mode == MMC_POWER_OFF) {
/* Only a reset could power-off sdmmc */
reset_control_assert(host->rst);
@@ -257,6 +295,10 @@
writel(MCI_IRQENABLE | host->variant->start_err,
host->base + MMCIMASK0);
+ /* preserves voltage switch bits */
+ pwr |= host->pwr_reg & (MCI_STM32_VSWITCHEN |
+ MCI_STM32_VSWITCH);
+
/*
* After a power-cycle state, we must set the SDMMC in
* Power-off. The SDMMC_D[7:0], SDMMC_CMD and SDMMC_CK are
@@ -285,6 +327,183 @@
return datactrl;
}
+static bool sdmmc_busy_complete(struct mmci_host *host, u32 status, u32 err_msk)
+{
+ void __iomem *base = host->base;
+ u32 busy_d0, busy_d0end, mask, sdmmc_status;
+
+ mask = readl_relaxed(base + MMCIMASK0);
+ sdmmc_status = readl_relaxed(base + MMCISTATUS);
+ busy_d0end = sdmmc_status & MCI_STM32_BUSYD0END;
+ busy_d0 = sdmmc_status & MCI_STM32_BUSYD0;
+
+ /* complete if there is an error or busy_d0end */
+ if ((status & err_msk) || busy_d0end)
+ goto complete;
+
+ /*
+ * On response the busy signaling is reflected in the BUSYD0 flag.
+ * if busy_d0 is in-progress we must activate busyd0end interrupt
+ * to wait this completion. Else this request has no busy step.
+ */
+ if (busy_d0) {
+ if (!host->busy_status) {
+ writel_relaxed(mask | host->variant->busy_detect_mask,
+ base + MMCIMASK0);
+ host->busy_status = status &
+ (MCI_CMDSENT | MCI_CMDRESPEND);
+ }
+ return false;
+ }
+
+complete:
+ if (host->busy_status) {
+ writel_relaxed(mask & ~host->variant->busy_detect_mask,
+ base + MMCIMASK0);
+ host->busy_status = 0;
+ }
+
+ writel_relaxed(host->variant->busy_detect_mask, base + MMCICLEAR);
+
+ return true;
+}
+
+static void sdmmc_dlyb_set_cfgr(struct sdmmc_dlyb *dlyb,
+ int unit, int phase, bool sampler)
+{
+ u32 cfgr;
+
+ writel_relaxed(DLYB_CR_SEN | DLYB_CR_DEN, dlyb->base + DLYB_CR);
+
+ cfgr = FIELD_PREP(DLYB_CFGR_UNIT_MASK, unit) |
+ FIELD_PREP(DLYB_CFGR_SEL_MASK, phase);
+ writel_relaxed(cfgr, dlyb->base + DLYB_CFGR);
+
+ if (!sampler)
+ writel_relaxed(DLYB_CR_DEN, dlyb->base + DLYB_CR);
+}
+
+static int sdmmc_dlyb_lng_tuning(struct mmci_host *host)
+{
+ struct sdmmc_dlyb *dlyb = host->variant_priv;
+ u32 cfgr;
+ int i, lng, ret;
+
+ for (i = 0; i <= DLYB_CFGR_UNIT_MAX; i++) {
+ sdmmc_dlyb_set_cfgr(dlyb, i, DLYB_CFGR_SEL_MAX, true);
+
+ ret = readl_relaxed_poll_timeout(dlyb->base + DLYB_CFGR, cfgr,
+ (cfgr & DLYB_CFGR_LNGF),
+ 1, DLYB_LNG_TIMEOUT_US);
+ if (ret) {
+ dev_warn(mmc_dev(host->mmc),
+ "delay line cfg timeout unit:%d cfgr:%d\n",
+ i, cfgr);
+ continue;
+ }
+
+ lng = FIELD_GET(DLYB_CFGR_LNG_MASK, cfgr);
+ if (lng < BIT(DLYB_NB_DELAY) && lng > 0)
+ break;
+ }
+
+ if (i > DLYB_CFGR_UNIT_MAX)
+ return -EINVAL;
+
+ dlyb->unit = i;
+ dlyb->max = __fls(lng);
+
+ return 0;
+}
+
+static int sdmmc_dlyb_phase_tuning(struct mmci_host *host, u32 opcode)
+{
+ struct sdmmc_dlyb *dlyb = host->variant_priv;
+ int cur_len = 0, max_len = 0, end_of_len = 0;
+ int phase;
+
+ for (phase = 0; phase <= dlyb->max; phase++) {
+ sdmmc_dlyb_set_cfgr(dlyb, dlyb->unit, phase, false);
+
+ if (mmc_send_tuning(host->mmc, opcode, NULL)) {
+ cur_len = 0;
+ } else {
+ cur_len++;
+ if (cur_len > max_len) {
+ max_len = cur_len;
+ end_of_len = phase;
+ }
+ }
+ }
+
+ if (!max_len) {
+ dev_err(mmc_dev(host->mmc), "no tuning point found\n");
+ return -EINVAL;
+ }
+
+ writel_relaxed(0, dlyb->base + DLYB_CR);
+
+ phase = end_of_len - max_len / 2;
+ sdmmc_dlyb_set_cfgr(dlyb, dlyb->unit, phase, false);
+
+ dev_dbg(mmc_dev(host->mmc), "unit:%d max_dly:%d phase:%d\n",
+ dlyb->unit, dlyb->max, phase);
+
+ return 0;
+}
+
+static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+ struct sdmmc_dlyb *dlyb = host->variant_priv;
+
+ if (!dlyb || !dlyb->base)
+ return -EINVAL;
+
+ if (sdmmc_dlyb_lng_tuning(host))
+ return -EINVAL;
+
+ return sdmmc_dlyb_phase_tuning(host, opcode);
+}
+
+static void sdmmc_pre_sig_volt_vswitch(struct mmci_host *host)
+{
+ /* clear the voltage switch completion flag */
+ writel_relaxed(MCI_STM32_VSWENDC, host->base + MMCICLEAR);
+ /* enable Voltage switch procedure */
+ mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCHEN);
+}
+
+static int sdmmc_post_sig_volt_switch(struct mmci_host *host,
+ struct mmc_ios *ios)
+{
+ unsigned long flags;
+ u32 status;
+ int ret = 0;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180 &&
+ host->pwr_reg & MCI_STM32_VSWITCHEN) {
+ mmci_write_pwrreg(host, host->pwr_reg | MCI_STM32_VSWITCH);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ /* wait voltage switch completion while 10ms */
+ ret = readl_relaxed_poll_timeout(host->base + MMCISTATUS,
+ status,
+ (status & MCI_STM32_VSWEND),
+ 10, SDMMC_VSWEND_TIMEOUT_US);
+
+ writel_relaxed(MCI_STM32_VSWENDC | MCI_STM32_CKSTOPC,
+ host->base + MMCICLEAR);
+ spin_lock_irqsave(&host->lock, flags);
+ mmci_write_pwrreg(host, host->pwr_reg &
+ ~(MCI_STM32_VSWITCHEN | MCI_STM32_VSWITCH));
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return ret;
+}
+
static struct mmci_host_ops sdmmc_variant_ops = {
.validate_data = sdmmc_idma_validate_data,
.prep_data = sdmmc_idma_prep_data,
@@ -295,9 +514,29 @@
.dma_finalize = sdmmc_idma_finalize,
.set_clkreg = mmci_sdmmc_set_clkreg,
.set_pwrreg = mmci_sdmmc_set_pwrreg,
+ .busy_complete = sdmmc_busy_complete,
+ .pre_sig_volt_switch = sdmmc_pre_sig_volt_vswitch,
+ .post_sig_volt_switch = sdmmc_post_sig_volt_switch,
};
void sdmmc_variant_init(struct mmci_host *host)
{
+ struct device_node *np = host->mmc->parent->of_node;
+ void __iomem *base_dlyb;
+ struct sdmmc_dlyb *dlyb;
+
host->ops = &sdmmc_variant_ops;
+ host->pwr_reg = readl_relaxed(host->base + MMCIPOWER);
+
+ base_dlyb = devm_of_iomap(mmc_dev(host->mmc), np, 1, NULL);
+ if (IS_ERR(base_dlyb))
+ return;
+
+ dlyb = devm_kzalloc(mmc_dev(host->mmc), sizeof(*dlyb), GFP_KERNEL);
+ if (!dlyb)
+ return;
+
+ dlyb->base = base_dlyb;
+ host->variant_priv = dlyb;
+ host->mmc_ops->execute_tuning = sdmmc_execute_tuning;
}
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index 5553a56..ea67a7e 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -569,37 +569,37 @@
if (!mmc) {
dev_err(dev, "mmc_alloc_host failed\n");
ret = -ENOMEM;
- goto out;
+ goto out_mmc;
}
ret = of_address_to_resource(node, 0, &res_mmc);
if (ret) {
dev_err(dev, "of_address_to_resource failed\n");
- goto out;
+ goto out_mmc;
}
irq = irq_of_parse_and_map(node, 0);
if (irq <= 0) {
dev_err(dev, "irq_of_parse_and_map failed\n");
ret = -EINVAL;
- goto out;
+ goto out_mmc;
}
clk = devm_clk_get(dev, NULL);
if (IS_ERR(clk)) {
ret = PTR_ERR(clk);
- goto out;
+ goto out_mmc;
}
reg_mmc = devm_ioremap_resource(dev, &res_mmc);
if (IS_ERR(reg_mmc)) {
ret = PTR_ERR(reg_mmc);
- goto out;
+ goto out_mmc;
}
ret = mmc_of_parse(mmc);
if (ret)
- goto out;
+ goto out_mmc;
host = mmc_priv(mmc);
host->mmc = mmc;
@@ -608,8 +608,8 @@
host->timeout = msecs_to_jiffies(1000);
host->sysclk = clk_get_rate(clk);
host->fifo_width = readl(host->base + REG_FEATURE) << 2;
- host->dma_chan_tx = dma_request_slave_channel_reason(dev, "tx");
- host->dma_chan_rx = dma_request_slave_channel_reason(dev, "rx");
+ host->dma_chan_tx = dma_request_chan(dev, "tx");
+ host->dma_chan_rx = dma_request_chan(dev, "rx");
spin_lock_init(&host->lock);
@@ -624,6 +624,14 @@
ret = -EPROBE_DEFER;
goto out;
}
+ if (!IS_ERR(host->dma_chan_tx)) {
+ dma_release_channel(host->dma_chan_tx);
+ host->dma_chan_tx = NULL;
+ }
+ if (!IS_ERR(host->dma_chan_rx)) {
+ dma_release_channel(host->dma_chan_rx);
+ host->dma_chan_rx = NULL;
+ }
dev_dbg(dev, "PIO mode transfer enabled\n");
host->have_dma = false;
} else {
@@ -678,6 +686,11 @@
return 0;
out:
+ if (!IS_ERR_OR_NULL(host->dma_chan_tx))
+ dma_release_channel(host->dma_chan_tx);
+ if (!IS_ERR_OR_NULL(host->dma_chan_rx))
+ dma_release_channel(host->dma_chan_rx);
+out_mmc:
if (mmc)
mmc_free_host(mmc);
return ret;
@@ -690,19 +703,18 @@
dev_set_drvdata(&pdev->dev, NULL);
- if (mmc) {
- if (!IS_ERR(host->dma_chan_tx))
- dma_release_channel(host->dma_chan_tx);
- if (!IS_ERR(host->dma_chan_rx))
- dma_release_channel(host->dma_chan_rx);
- mmc_remove_host(mmc);
- mmc_free_host(mmc);
+ if (!IS_ERR_OR_NULL(host->dma_chan_tx))
+ dma_release_channel(host->dma_chan_tx);
+ if (!IS_ERR_OR_NULL(host->dma_chan_rx))
+ dma_release_channel(host->dma_chan_rx);
+ mmc_remove_host(mmc);
- writel(0, host->base + REG_INTERRUPT_MASK);
- writel(0, host->base + REG_POWER_CONTROL);
- writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
- host->base + REG_CLOCK_CONTROL);
- }
+ writel(0, host->base + REG_INTERRUPT_MASK);
+ writel(0, host->base + REG_POWER_CONTROL);
+ writel(readl(host->base + REG_CLOCK_CONTROL) | CLK_OFF,
+ host->base + REG_CLOCK_CONTROL);
+ mmc_free_host(mmc);
+
return 0;
}
@@ -718,6 +730,7 @@
.remove = moxart_remove,
.driver = {
.name = "mmc-moxart",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = moxart_mmc_match,
},
};
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 1254a56..f5c965d 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -8,6 +8,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/of_address.h>
@@ -32,6 +33,8 @@
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
+#include "cqhci.h"
+
#define MAX_BD_NUM 1024
/*--------------------------------------------------------------------------*/
@@ -129,6 +132,7 @@
#define MSDC_PS_CDSTS (0x1 << 1) /* R */
#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */
#define MSDC_PS_DAT (0xff << 16) /* R */
+#define MSDC_PS_DATA1 (0x1 << 17) /* R */
#define MSDC_PS_CMD (0x1 << 24) /* R */
#define MSDC_PS_WP (0x1 << 31) /* R */
@@ -152,6 +156,7 @@
#define MSDC_INT_DMA_BDCSERR (0x1 << 17) /* W1C */
#define MSDC_INT_DMA_GPDCSERR (0x1 << 18) /* W1C */
#define MSDC_INT_DMA_PROTECT (0x1 << 19) /* W1C */
+#define MSDC_INT_CMDQ (0x1 << 28) /* W1C */
/* MSDC_INTEN mask */
#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */
@@ -182,6 +187,7 @@
/* SDC_CFG mask */
#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */
#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */
+#define SDC_CFG_WRDTOC (0x1fff << 2) /* RW */
#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */
#define SDC_CFG_SDIO (0x1 << 19) /* RW */
#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */
@@ -230,6 +236,7 @@
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
#define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
+#define MSDC_PB1_BUSY_CHECK_SEL (0x1 << 7) /* RW */
#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
@@ -362,6 +369,7 @@
struct mtk_mmc_compatible {
u8 clk_div_bits;
+ bool recheck_sdio_irq;
bool hs400_tune; /* only used for MT8173 */
u32 pad_tune_reg;
bool async_fifo;
@@ -390,7 +398,6 @@
struct msdc_host {
struct device *dev;
const struct mtk_mmc_compatible *dev_comp;
- struct mmc_host *mmc; /* mmc structure */
int cmd_rsp;
spinlock_t lock;
@@ -431,13 +438,16 @@
/* cmd response sample selection for HS400 */
bool hs400_mode; /* current eMMC will run at hs400 mode */
bool internal_cd; /* Use internal card-detect logic */
+ bool cqhci; /* support eMMC hw cmdq */
struct msdc_save_para save_para; /* used when gate HCLK */
struct msdc_tune_para def_tune_para; /* default tune setting */
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
+ struct cqhci_host *cq_host;
};
static const struct mtk_mmc_compatible mt8135_compat = {
.clk_div_bits = 8,
+ .recheck_sdio_irq = true,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE,
.async_fifo = false,
@@ -450,6 +460,7 @@
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
+ .recheck_sdio_irq = true,
.hs400_tune = true,
.pad_tune_reg = MSDC_PAD_TUNE,
.async_fifo = false,
@@ -462,6 +473,7 @@
static const struct mtk_mmc_compatible mt8183_compat = {
.clk_div_bits = 12,
+ .recheck_sdio_irq = false,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE0,
.async_fifo = true,
@@ -474,6 +486,7 @@
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
+ .recheck_sdio_irq = true,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE0,
.async_fifo = true,
@@ -486,6 +499,7 @@
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
+ .recheck_sdio_irq = false,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE0,
.async_fifo = true,
@@ -498,6 +512,7 @@
static const struct mtk_mmc_compatible mt7622_compat = {
.clk_div_bits = 12,
+ .recheck_sdio_irq = true,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE0,
.async_fifo = true,
@@ -510,6 +525,7 @@
static const struct mtk_mmc_compatible mt8516_compat = {
.clk_div_bits = 12,
+ .recheck_sdio_irq = true,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE0,
.async_fifo = true,
@@ -520,6 +536,7 @@
static const struct mtk_mmc_compatible mt7620_compat = {
.clk_div_bits = 8,
+ .recheck_sdio_irq = true,
.hs400_tune = false,
.pad_tune_reg = MSDC_PAD_TUNE,
.async_fifo = false,
@@ -530,6 +547,19 @@
.use_internal_cd = true,
};
+static const struct mtk_mmc_compatible mt6779_compat = {
+ .clk_div_bits = 12,
+ .recheck_sdio_irq = false,
+ .hs400_tune = false,
+ .pad_tune_reg = MSDC_PAD_TUNE0,
+ .async_fifo = true,
+ .data_tune = true,
+ .busy_check = true,
+ .stop_clk_fix = true,
+ .enhance_rx = true,
+ .support_64g = true,
+};
+
static const struct of_device_id msdc_of_ids[] = {
{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
@@ -539,6 +569,7 @@
{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
{ .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
+ { .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},
{}
};
MODULE_DEVICE_TABLE(of, msdc_of_ids);
@@ -593,6 +624,7 @@
static void msdc_cmd_next(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd);
+static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb);
static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR |
MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY |
@@ -701,21 +733,22 @@
}
}
-/* clock control primitives */
-static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
+static u64 msdc_timeout_cal(struct msdc_host *host, u64 ns, u64 clks)
{
- u32 timeout, clk_ns;
+ struct mmc_host *mmc = mmc_from_priv(host);
+ u64 timeout, clk_ns;
u32 mode = 0;
- host->timeout_ns = ns;
- host->timeout_clks = clks;
- if (host->mmc->actual_clock == 0) {
+ if (mmc->actual_clock == 0) {
timeout = 0;
} else {
- clk_ns = 1000000000UL / host->mmc->actual_clock;
- timeout = (ns + clk_ns - 1) / clk_ns + clks;
+ clk_ns = 1000000000ULL;
+ do_div(clk_ns, mmc->actual_clock);
+ timeout = ns + clk_ns - 1;
+ do_div(timeout, clk_ns);
+ timeout += clks;
/* in 1048576 sclk cycle unit */
- timeout = (timeout + (0x1 << 20) - 1) >> 20;
+ timeout = DIV_ROUND_UP(timeout, (0x1 << 20));
if (host->dev_comp->clk_div_bits == 8)
sdr_get_field(host->base + MSDC_CFG,
MSDC_CFG_CKMOD, &mode);
@@ -725,9 +758,30 @@
/*DDR mode will double the clk cycles for data timeout */
timeout = mode >= 2 ? timeout * 2 : timeout;
timeout = timeout > 1 ? timeout - 1 : 0;
- timeout = timeout > 255 ? 255 : timeout;
}
- sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, timeout);
+ return timeout;
+}
+
+/* clock control primitives */
+static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+ u64 timeout;
+
+ host->timeout_ns = ns;
+ host->timeout_clks = clks;
+
+ timeout = msdc_timeout_cal(host, ns, clks);
+ sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC,
+ (u32)(timeout > 255 ? 255 : timeout));
+}
+
+static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+ u64 timeout;
+
+ timeout = msdc_timeout_cal(host, ns, clks);
+ sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
+ (u32)(timeout > 8191 ? 8191 : timeout));
}
static void msdc_gate_clock(struct msdc_host *host)
@@ -750,6 +804,7 @@
static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
{
+ struct mmc_host *mmc = mmc_from_priv(host);
u32 mode;
u32 flags;
u32 div;
@@ -759,7 +814,7 @@
if (!hz) {
dev_dbg(host->dev, "set mclk to 0\n");
host->mclk = 0;
- host->mmc->actual_clock = 0;
+ mmc->actual_clock = 0;
sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
return;
}
@@ -838,7 +893,7 @@
while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
cpu_relax();
sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
- host->mmc->actual_clock = sclk;
+ mmc->actual_clock = sclk;
host->mclk = hz;
host->timing = timing;
/* need because clk changed. */
@@ -849,7 +904,7 @@
* mmc_select_hs400() will drop to 50Mhz and High speed mode,
* tune result of hs200/200Mhz is not suitable for 50Mhz
*/
- if (host->mmc->actual_clock <= 52000000) {
+ if (mmc->actual_clock <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
if (host->top_base) {
writel(host->def_tune_para.emmc_top_control,
@@ -880,7 +935,7 @@
sdr_set_field(host->base + tune_reg,
MSDC_PAD_TUNE_CMDRRDLY,
host->hs400_cmd_int_delay);
- dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->mmc->actual_clock,
+ dev_dbg(host->dev, "sclk: %d, timing: %d\n", mmc->actual_clock,
timing);
}
@@ -915,6 +970,7 @@
static inline u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd)
{
+ struct mmc_host *mmc = mmc_from_priv(host);
/* rawcmd :
* vol_swt << 30 | auto_cmd << 28 | blklen << 16 | go_irq << 15 |
* stop << 14 | rw << 13 | dtype << 11 | rsptyp << 7 | brk << 6 | opcode
@@ -941,7 +997,7 @@
struct mmc_data *data = cmd->data;
if (mmc_op_multi(opcode)) {
- if (mmc_card_mmc(host->mmc->card) && mrq->sbc &&
+ if (mmc_card_mmc(mmc->card) && mrq->sbc &&
!(mrq->sbc->arg & 0xFFFF0000))
rawcmd |= 0x2 << 28; /* AutoCMD23 */
}
@@ -1009,6 +1065,32 @@
return cmd->error;
}
+/*
+ * msdc_recheck_sdio_irq - recheck whether the SDIO irq is lost
+ *
+ * Host controller may lost interrupt in some special case.
+ * Add SDIO irq recheck mechanism to make sure all interrupts
+ * can be processed immediately
+ */
+static void msdc_recheck_sdio_irq(struct msdc_host *host)
+{
+ struct mmc_host *mmc = mmc_from_priv(host);
+ u32 reg_int, reg_inten, reg_ps;
+
+ if (mmc->caps & MMC_CAP_SDIO_IRQ) {
+ reg_inten = readl(host->base + MSDC_INTEN);
+ if (reg_inten & MSDC_INTEN_SDIOIRQ) {
+ reg_int = readl(host->base + MSDC_INT);
+ reg_ps = readl(host->base + MSDC_PS);
+ if (!(reg_int & MSDC_INT_SDIOIRQ ||
+ reg_ps & MSDC_PS_DATA1)) {
+ __msdc_enable_sdio_irq(host, 0);
+ sdio_signal_irq(mmc);
+ }
+ }
+ }
+}
+
static void msdc_track_cmd_data(struct msdc_host *host,
struct mmc_command *cmd, struct mmc_data *data)
{
@@ -1036,7 +1118,9 @@
msdc_unprepare_data(host, mrq);
if (host->error)
msdc_reset_hw(host);
- mmc_request_done(host->mmc, mrq);
+ mmc_request_done(mmc_from_priv(host), mrq);
+ if (host->dev_comp->recheck_sdio_irq)
+ msdc_recheck_sdio_irq(host);
}
/* returns true if command is fully handled; returns false otherwise */
@@ -1334,7 +1418,7 @@
static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct msdc_host *host = mmc_priv(mmc);
- int ret = 0;
+ int ret;
if (!IS_ERR(mmc->supply.vqmmc)) {
if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330 &&
@@ -1344,18 +1428,19 @@
}
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret) {
+ if (ret < 0) {
dev_dbg(host->dev, "Regulator set error %d (%d)\n",
ret, ios->signal_voltage);
- } else {
- /* Apply different pinctrl settings for different signal voltage */
- if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
- pinctrl_select_state(host->pinctrl, host->pins_uhs);
- else
- pinctrl_select_state(host->pinctrl, host->pins_default);
+ return ret;
}
+
+ /* Apply different pinctrl settings for different signal voltage */
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+ pinctrl_select_state(host->pinctrl, host->pins_uhs);
+ else
+ pinctrl_select_state(host->pinctrl, host->pins_default);
}
- return ret;
+ return 0;
}
static int msdc_card_busy(struct mmc_host *mmc)
@@ -1397,6 +1482,8 @@
if (enb) {
sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ if (host->dev_comp->recheck_sdio_irq)
+ msdc_recheck_sdio_irq(host);
} else {
sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_SDIOIRQ);
sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
@@ -1418,9 +1505,39 @@
pm_runtime_put_noidle(host->dev);
}
+static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
+{
+ struct mmc_host *mmc = mmc_from_priv(host);
+ int cmd_err = 0, dat_err = 0;
+
+ if (intsts & MSDC_INT_RSPCRCERR) {
+ cmd_err = -EILSEQ;
+ dev_err(host->dev, "%s: CMD CRC ERR", __func__);
+ } else if (intsts & MSDC_INT_CMDTMO) {
+ cmd_err = -ETIMEDOUT;
+ dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
+ }
+
+ if (intsts & MSDC_INT_DATCRCERR) {
+ dat_err = -EILSEQ;
+ dev_err(host->dev, "%s: DATA CRC ERR", __func__);
+ } else if (intsts & MSDC_INT_DATTMO) {
+ dat_err = -ETIMEDOUT;
+ dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
+ }
+
+ if (cmd_err || dat_err) {
+ dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
+ cmd_err, dat_err, intsts);
+ }
+
+ return cqhci_irq(mmc, 0, cmd_err, dat_err);
+}
+
static irqreturn_t msdc_irq(int irq, void *dev_id)
{
struct msdc_host *host = (struct msdc_host *) dev_id;
+ struct mmc_host *mmc = mmc_from_priv(host);
while (true) {
unsigned long flags;
@@ -1443,17 +1560,25 @@
spin_unlock_irqrestore(&host->lock, flags);
if ((events & event_mask) & MSDC_INT_SDIOIRQ)
- sdio_signal_irq(host->mmc);
+ sdio_signal_irq(mmc);
if ((events & event_mask) & MSDC_INT_CDSC) {
if (host->internal_cd)
- mmc_detect_change(host->mmc, msecs_to_jiffies(20));
+ mmc_detect_change(mmc, msecs_to_jiffies(20));
events &= ~MSDC_INT_CDSC;
}
if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
break;
+ if ((mmc->caps2 & MMC_CAP2_CQE) &&
+ (events & MSDC_INT_CMDQ)) {
+ msdc_cmdq_irq(host, events);
+ /* clear interrupts */
+ writel(events, host->base + MSDC_INT);
+ return IRQ_HANDLED;
+ }
+
if (!mrq) {
dev_err(host->dev,
"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
@@ -2144,6 +2269,60 @@
return !val;
}
+static void msdc_cqe_enable(struct mmc_host *mmc)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+
+ /* enable cmdq irq */
+ writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
+ /* enable busy check */
+ sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+ /* default write data / busy timeout 20s */
+ msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
+ /* default read data timeout 1s */
+ msdc_set_timeout(host, 1000000000ULL, 0);
+}
+
+static void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
+{
+ struct msdc_host *host = mmc_priv(mmc);
+ unsigned int val = 0;
+
+ /* disable cmdq irq */
+ sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
+ /* disable busy check */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+
+ if (recovery) {
+ sdr_set_field(host->base + MSDC_DMA_CTRL,
+ MSDC_DMA_CTRL_STOP, 1);
+ if (WARN_ON(readl_poll_timeout(host->base + MSDC_DMA_CFG, val,
+ !(val & MSDC_DMA_CFG_STS), 1, 3000)))
+ return;
+ msdc_reset_hw(host);
+ }
+}
+
+static void msdc_cqe_pre_enable(struct mmc_host *mmc)
+{
+ struct cqhci_host *cq_host = mmc->cqe_private;
+ u32 reg;
+
+ reg = cqhci_readl(cq_host, CQHCI_CFG);
+ reg |= CQHCI_ENABLE;
+ cqhci_writel(cq_host, reg, CQHCI_CFG);
+}
+
+static void msdc_cqe_post_disable(struct mmc_host *mmc)
+{
+ struct cqhci_host *cq_host = mmc->cqe_private;
+ u32 reg;
+
+ reg = cqhci_readl(cq_host, CQHCI_CFG);
+ reg &= ~CQHCI_ENABLE;
+ cqhci_writel(cq_host, reg, CQHCI_CFG);
+}
+
static const struct mmc_host_ops mt_msdc_ops = {
.post_req = msdc_post_req,
.pre_req = msdc_pre_req,
@@ -2160,6 +2339,13 @@
.hw_reset = msdc_hw_reset,
};
+static const struct cqhci_host_ops msdc_cmdq_ops = {
+ .enable = msdc_cqe_enable,
+ .disable = msdc_cqe_disable,
+ .pre_enable = msdc_cqe_pre_enable,
+ .post_disable = msdc_cqe_post_disable,
+};
+
static void msdc_of_property_parse(struct platform_device *pdev,
struct msdc_host *host)
{
@@ -2180,6 +2366,12 @@
host->hs400_cmd_resp_sel_rising = true;
else
host->hs400_cmd_resp_sel_rising = false;
+
+ if (of_property_read_bool(pdev->dev.of_node,
+ "supports-cqe"))
+ host->cqhci = true;
+ else
+ host->cqhci = false;
}
static int msdc_drv_probe(struct platform_device *pdev)
@@ -2204,8 +2396,7 @@
if (ret)
goto host_free;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->base = devm_ioremap_resource(&pdev->dev, res);
+ host->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->base)) {
ret = PTR_ERR(host->base);
goto host_free;
@@ -2278,7 +2469,6 @@
host->dev = &pdev->dev;
host->dev_comp = of_device_get_match_data(&pdev->dev);
- host->mmc = mmc;
host->src_clk_freq = clk_get_rate(host->src_clk);
/* Set host parameters to mmc */
mmc->ops = &mt_msdc_ops;
@@ -2300,7 +2490,9 @@
if (mmc->caps & MMC_CAP_SDIO_IRQ)
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+ mmc->caps |= MMC_CAP_CMD23;
+ if (host->cqhci)
+ mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
/* MMC core transfer sizes tunable parameters */
mmc->max_segs = MAX_BD_NUM;
if (host->dev_comp->support_64g)
@@ -2335,6 +2527,26 @@
msdc_ungate_clock(host);
msdc_init_hw(host);
+ if (mmc->caps2 & MMC_CAP2_CQE) {
+ host->cq_host = devm_kzalloc(mmc->parent,
+ sizeof(*host->cq_host),
+ GFP_KERNEL);
+ if (!host->cq_host) {
+ ret = -ENOMEM;
+ goto host_free;
+ }
+ host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ host->cq_host->mmio = host->base + 0x800;
+ host->cq_host->ops = &msdc_cmdq_ops;
+ ret = cqhci_init(host->cq_host, mmc, true);
+ if (ret)
+ goto host_free;
+ mmc->max_segs = 128;
+ /* cqhci 16bit length */
+ /* 0 size, means 65536 so we don't have to -1 here */
+ mmc->max_seg_size = 64 * 1024;
+ }
+
ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
IRQF_TRIGGER_NONE, pdev->name, host);
if (ret)
@@ -2382,7 +2594,7 @@
pm_runtime_get_sync(host->dev);
platform_set_drvdata(pdev, NULL);
- mmc_remove_host(host->mmc);
+ mmc_remove_host(mmc);
msdc_deinit_hw(host);
msdc_gate_clock(host);
@@ -2394,12 +2606,11 @@
dma_free_coherent(&pdev->dev, MAX_BD_NUM * sizeof(struct mt_bdma_desc),
host->dma.bd, host->dma.bd_addr);
- mmc_free_host(host->mmc);
+ mmc_free_host(mmc);
return 0;
}
-#ifdef CONFIG_PM
static void msdc_save_reg(struct msdc_host *host)
{
u32 tune_reg = host->dev_comp->pad_tune_reg;
@@ -2429,6 +2640,7 @@
static void msdc_restore_reg(struct msdc_host *host)
{
+ struct mmc_host *mmc = mmc_from_priv(host);
u32 tune_reg = host->dev_comp->pad_tune_reg;
writel(host->save_para.msdc_cfg, host->base + MSDC_CFG);
@@ -2453,11 +2665,11 @@
writel(host->save_para.pad_tune, host->base + tune_reg);
}
- if (sdio_irq_claimed(host->mmc))
+ if (sdio_irq_claimed(mmc))
__msdc_enable_sdio_irq(host, 1);
}
-static int msdc_runtime_suspend(struct device *dev)
+static int __maybe_unused msdc_runtime_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct msdc_host *host = mmc_priv(mmc);
@@ -2467,7 +2679,7 @@
return 0;
}
-static int msdc_runtime_resume(struct device *dev)
+static int __maybe_unused msdc_runtime_resume(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct msdc_host *host = mmc_priv(mmc);
@@ -2476,11 +2688,28 @@
msdc_restore_reg(host);
return 0;
}
-#endif
+
+static int __maybe_unused msdc_suspend(struct device *dev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ int ret;
+
+ if (mmc->caps2 & MMC_CAP2_CQE) {
+ ret = cqhci_suspend(mmc);
+ if (ret)
+ return ret;
+ }
+
+ return pm_runtime_force_suspend(dev);
+}
+
+static int __maybe_unused msdc_resume(struct device *dev)
+{
+ return pm_runtime_force_resume(dev);
+}
static const struct dev_pm_ops msdc_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
- pm_runtime_force_resume)
+ SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume)
SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume, NULL)
};
@@ -2489,6 +2718,7 @@
.remove = msdc_drv_remove,
.driver = {
.name = "mtk-msdc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = msdc_of_ids,
.pm = &msdc_dev_pm_ops,
},
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 74a0a7f..629efbe 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -696,16 +696,14 @@
struct mmc_host *mmc = NULL;
struct mvsd_host *host = NULL;
const struct mbus_dram_target_info *dram;
- struct resource *r;
int ret, irq;
if (!np) {
dev_err(&pdev->dev, "no DT node\n");
return -ENODEV;
}
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!r || irq < 0)
+ if (irq < 0)
return -ENXIO;
mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev);
@@ -754,11 +752,9 @@
if (maxfreq)
mmc->f_max = maxfreq;
- mmc->caps |= MMC_CAP_ERASE;
-
spin_lock_init(&host->lock);
- host->base = devm_ioremap_resource(&pdev->dev, r);
+ host->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->base)) {
ret = PTR_ERR(host->base);
goto out;
@@ -828,6 +824,7 @@
.remove = mvsd_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = mvsdio_dt_ids,
},
};
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 011b59a..12ee072 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -1121,7 +1121,16 @@
mxcmci_writel(host, host->default_irq_mask, MMC_REG_INT_CNTR);
if (!host->pdata) {
- host->dma = dma_request_slave_channel(&pdev->dev, "rx-tx");
+ host->dma = dma_request_chan(&pdev->dev, "rx-tx");
+ if (IS_ERR(host->dma)) {
+ if (PTR_ERR(host->dma) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto out_clk_put;
+ }
+
+ /* Ignore errors to fall back to PIO mode */
+ host->dma = NULL;
+ }
} else {
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (res) {
@@ -1235,6 +1244,7 @@
.id_table = mxcmci_devtype,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &mxcmci_pm_ops,
.of_match_table = mxcmci_of_match,
}
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 5205493..2ec3eb6 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -565,6 +565,11 @@
};
MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
+static void mxs_mmc_regulator_disable(void *regulator)
+{
+ regulator_disable(regulator);
+}
+
static int mxs_mmc_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
@@ -606,6 +611,11 @@
"Failed to enable vmmc regulator: %d\n", ret);
goto out_mmc_free;
}
+
+ ret = devm_add_action_or_reset(&pdev->dev, mxs_mmc_regulator_disable,
+ reg_vmmc);
+ if (ret)
+ goto out_mmc_free;
}
ssp->clk = devm_clk_get(&pdev->dev, NULL);
@@ -623,19 +633,18 @@
goto out_clk_disable;
}
- ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
- if (!ssp->dmach) {
+ ssp->dmach = dma_request_chan(&pdev->dev, "rx-tx");
+ if (IS_ERR(ssp->dmach)) {
dev_err(mmc_dev(host->mmc),
"%s: failed to request dma\n", __func__);
- ret = -ENODEV;
+ ret = PTR_ERR(ssp->dmach);
goto out_clk_disable;
}
/* set mmc core parameters */
mmc->ops = &mxs_mmc_ops;
mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL | MMC_CAP_CMD23 |
- MMC_CAP_ERASE;
+ MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL | MMC_CAP_CMD23;
host->broken_cd = of_property_read_bool(np, "broken-cd");
@@ -727,6 +736,7 @@
.id_table = mxs_ssp_ids,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &mxs_mmc_pm_ops,
.of_match_table = mxs_mmc_dt_ids,
},
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index d74e73c..6aa0537 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1244,7 +1244,7 @@
mmc->caps = 0;
if (host->pdata->slots[id].wires >= 4)
- mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_ERASE;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
@@ -1504,6 +1504,7 @@
.remove = mmc_omap_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(mmc_omap_match),
},
};
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d0df054..aa9cc49 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1114,8 +1114,7 @@
int ret;
/* Disable the clocks */
- if (host->dbclk)
- clk_disable_unprepare(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
/* Turn the power off */
ret = omap_hsmmc_set_power(host, 0);
@@ -1123,8 +1122,7 @@
/* Turn the power ON with given VDD 1.8 or 3.0v */
if (!ret)
ret = omap_hsmmc_set_power(host, 1);
- if (host->dbclk)
- clk_prepare_enable(host->dbclk);
+ clk_prepare_enable(host->dbclk);
if (ret != 0)
goto err;
@@ -1510,10 +1508,7 @@
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (mmc_pdata(host)->init_card)
- mmc_pdata(host)->init_card(card);
- else if (card->type == MMC_TYPE_SDIO ||
- card->type == MMC_TYPE_SD_COMBO) {
+ if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
struct device_node *np = mmc_dev(mmc)->of_node;
/*
@@ -1608,12 +1603,6 @@
ret = PTR_ERR(p);
goto err_free_irq;
}
- if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) {
- dev_info(host->dev, "missing default pinctrl state\n");
- devm_pinctrl_put(p);
- ret = -EINVAL;
- goto err_free_irq;
- }
if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_IDLE))) {
dev_info(host->dev, "missing idle pinctrl state\n");
@@ -1931,7 +1920,7 @@
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE | MMC_CAP_CMD23;
+ MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_CMD23;
mmc->caps |= mmc_pdata(host)->caps;
if (mmc->caps & MMC_CAP_8_BIT_DATA)
@@ -2023,8 +2012,7 @@
pm_runtime_dont_use_autosuspend(host->dev);
pm_runtime_put_sync(host->dev);
pm_runtime_disable(host->dev);
- if (host->dbclk)
- clk_disable_unprepare(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
err1:
mmc_free_host(mmc);
err:
@@ -2046,8 +2034,7 @@
pm_runtime_put_sync(host->dev);
pm_runtime_disable(host->dev);
device_init_wakeup(&pdev->dev, false);
- if (host->dbclk)
- clk_disable_unprepare(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
mmc_free_host(host->mmc);
@@ -2072,8 +2059,7 @@
OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
}
- if (host->dbclk)
- clk_disable_unprepare(host->dbclk);
+ clk_disable_unprepare(host->dbclk);
pm_runtime_put_sync(host->dev);
return 0;
@@ -2089,8 +2075,7 @@
pm_runtime_get_sync(host->dev);
- if (host->dbclk)
- clk_prepare_enable(host->dbclk);
+ clk_prepare_enable(host->dbclk);
if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
omap_hsmmc_conf_bus_power(host);
@@ -2156,14 +2141,14 @@
if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
(host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
- pinctrl_pm_select_default_state(host->dev);
+ pinctrl_select_default_state(host->dev);
/* irq lost, if pinmux incorrect */
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN);
OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN);
} else {
- pinctrl_pm_select_default_state(host->dev);
+ pinctrl_select_default_state(host->dev);
}
spin_unlock_irqrestore(&host->irq_lock, flags);
return 0;
@@ -2180,6 +2165,7 @@
.remove = omap_hsmmc_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &omap_hsmmc_dev_pm_ops,
.of_match_table = of_match_ptr(omap_mmc_of_match),
},
diff --git a/drivers/mmc/host/owl-mmc.c b/drivers/mmc/host/owl-mmc.c
new file mode 100644
index 0000000..3d4abf1
--- /dev/null
+++ b/drivers/mmc/host/owl-mmc.c
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Actions Semi Owl SoCs SD/MMC driver
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Copyright (c) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ *
+ * TODO: SDIO support
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+/*
+ * SDC registers
+ */
+#define OWL_REG_SD_EN 0x0000
+#define OWL_REG_SD_CTL 0x0004
+#define OWL_REG_SD_STATE 0x0008
+#define OWL_REG_SD_CMD 0x000c
+#define OWL_REG_SD_ARG 0x0010
+#define OWL_REG_SD_RSPBUF0 0x0014
+#define OWL_REG_SD_RSPBUF1 0x0018
+#define OWL_REG_SD_RSPBUF2 0x001c
+#define OWL_REG_SD_RSPBUF3 0x0020
+#define OWL_REG_SD_RSPBUF4 0x0024
+#define OWL_REG_SD_DAT 0x0028
+#define OWL_REG_SD_BLK_SIZE 0x002c
+#define OWL_REG_SD_BLK_NUM 0x0030
+#define OWL_REG_SD_BUF_SIZE 0x0034
+
+/* SD_EN Bits */
+#define OWL_SD_EN_RANE BIT(31)
+#define OWL_SD_EN_RAN_SEED(x) (((x) & 0x3f) << 24)
+#define OWL_SD_EN_S18EN BIT(12)
+#define OWL_SD_EN_RESE BIT(10)
+#define OWL_SD_EN_DAT1_S BIT(9)
+#define OWL_SD_EN_CLK_S BIT(8)
+#define OWL_SD_ENABLE BIT(7)
+#define OWL_SD_EN_BSEL BIT(6)
+#define OWL_SD_EN_SDIOEN BIT(3)
+#define OWL_SD_EN_DDREN BIT(2)
+#define OWL_SD_EN_DATAWID(x) (((x) & 0x3) << 0)
+
+/* SD_CTL Bits */
+#define OWL_SD_CTL_TOUTEN BIT(31)
+#define OWL_SD_CTL_TOUTCNT(x) (((x) & 0x7f) << 24)
+#define OWL_SD_CTL_DELAY_MSK GENMASK(23, 16)
+#define OWL_SD_CTL_RDELAY(x) (((x) & 0xf) << 20)
+#define OWL_SD_CTL_WDELAY(x) (((x) & 0xf) << 16)
+#define OWL_SD_CTL_CMDLEN BIT(13)
+#define OWL_SD_CTL_SCC BIT(12)
+#define OWL_SD_CTL_TCN(x) (((x) & 0xf) << 8)
+#define OWL_SD_CTL_TS BIT(7)
+#define OWL_SD_CTL_LBE BIT(6)
+#define OWL_SD_CTL_C7EN BIT(5)
+#define OWL_SD_CTL_TM(x) (((x) & 0xf) << 0)
+
+#define OWL_SD_DELAY_LOW_CLK 0x0f
+#define OWL_SD_DELAY_MID_CLK 0x0a
+#define OWL_SD_DELAY_HIGH_CLK 0x09
+#define OWL_SD_RDELAY_DDR50 0x0a
+#define OWL_SD_WDELAY_DDR50 0x08
+
+/* SD_STATE Bits */
+#define OWL_SD_STATE_DAT1BS BIT(18)
+#define OWL_SD_STATE_SDIOB_P BIT(17)
+#define OWL_SD_STATE_SDIOB_EN BIT(16)
+#define OWL_SD_STATE_TOUTE BIT(15)
+#define OWL_SD_STATE_BAEP BIT(14)
+#define OWL_SD_STATE_MEMRDY BIT(12)
+#define OWL_SD_STATE_CMDS BIT(11)
+#define OWL_SD_STATE_DAT1AS BIT(10)
+#define OWL_SD_STATE_SDIOA_P BIT(9)
+#define OWL_SD_STATE_SDIOA_EN BIT(8)
+#define OWL_SD_STATE_DAT0S BIT(7)
+#define OWL_SD_STATE_TEIE BIT(6)
+#define OWL_SD_STATE_TEI BIT(5)
+#define OWL_SD_STATE_CLNR BIT(4)
+#define OWL_SD_STATE_CLC BIT(3)
+#define OWL_SD_STATE_WC16ER BIT(2)
+#define OWL_SD_STATE_RC16ER BIT(1)
+#define OWL_SD_STATE_CRC7ER BIT(0)
+
+#define OWL_CMD_TIMEOUT_MS 30000
+
+struct owl_mmc_host {
+ struct device *dev;
+ struct reset_control *reset;
+ void __iomem *base;
+ struct clk *clk;
+ struct completion sdc_complete;
+ spinlock_t lock;
+ int irq;
+ u32 clock;
+ bool ddr_50;
+
+ enum dma_data_direction dma_dir;
+ struct dma_chan *dma;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_slave_config dma_cfg;
+ struct completion dma_complete;
+
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+};
+
+static void owl_mmc_update_reg(void __iomem *reg, unsigned int val, bool state)
+{
+ unsigned int regval;
+
+ regval = readl(reg);
+
+ if (state)
+ regval |= val;
+ else
+ regval &= ~val;
+
+ writel(regval, reg);
+}
+
+static irqreturn_t owl_irq_handler(int irq, void *devid)
+{
+ struct owl_mmc_host *owl_host = devid;
+ unsigned long flags;
+ u32 state;
+
+ spin_lock_irqsave(&owl_host->lock, flags);
+
+ state = readl(owl_host->base + OWL_REG_SD_STATE);
+ if (state & OWL_SD_STATE_TEI) {
+ state = readl(owl_host->base + OWL_REG_SD_STATE);
+ state |= OWL_SD_STATE_TEI;
+ writel(state, owl_host->base + OWL_REG_SD_STATE);
+ complete(&owl_host->sdc_complete);
+ }
+
+ spin_unlock_irqrestore(&owl_host->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void owl_mmc_finish_request(struct owl_mmc_host *owl_host)
+{
+ struct mmc_request *mrq = owl_host->mrq;
+ struct mmc_data *data = mrq->data;
+
+ /* Should never be NULL */
+ WARN_ON(!mrq);
+
+ owl_host->mrq = NULL;
+
+ if (data)
+ dma_unmap_sg(owl_host->dma->device->dev, data->sg, data->sg_len,
+ owl_host->dma_dir);
+
+ /* Finally finish request */
+ mmc_request_done(owl_host->mmc, mrq);
+}
+
+static void owl_mmc_send_cmd(struct owl_mmc_host *owl_host,
+ struct mmc_command *cmd,
+ struct mmc_data *data)
+{
+ unsigned long timeout;
+ u32 mode, state, resp[2];
+ u32 cmd_rsp_mask = 0;
+
+ init_completion(&owl_host->sdc_complete);
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ mode = OWL_SD_CTL_TM(0);
+ break;
+
+ case MMC_RSP_R1:
+ if (data) {
+ if (data->flags & MMC_DATA_READ)
+ mode = OWL_SD_CTL_TM(4);
+ else
+ mode = OWL_SD_CTL_TM(5);
+ } else {
+ mode = OWL_SD_CTL_TM(1);
+ }
+ cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER;
+
+ break;
+
+ case MMC_RSP_R1B:
+ mode = OWL_SD_CTL_TM(3);
+ cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER;
+ break;
+
+ case MMC_RSP_R2:
+ mode = OWL_SD_CTL_TM(2);
+ cmd_rsp_mask = OWL_SD_STATE_CLNR | OWL_SD_STATE_CRC7ER;
+ break;
+
+ case MMC_RSP_R3:
+ mode = OWL_SD_CTL_TM(1);
+ cmd_rsp_mask = OWL_SD_STATE_CLNR;
+ break;
+
+ default:
+ dev_warn(owl_host->dev, "Unknown MMC command\n");
+ cmd->error = -EINVAL;
+ return;
+ }
+
+ /* Keep current WDELAY and RDELAY */
+ mode |= (readl(owl_host->base + OWL_REG_SD_CTL) & (0xff << 16));
+
+ /* Start to send corresponding command type */
+ writel(cmd->arg, owl_host->base + OWL_REG_SD_ARG);
+ writel(cmd->opcode, owl_host->base + OWL_REG_SD_CMD);
+
+ /* Set LBE to send clk at the end of last read block */
+ if (data) {
+ mode |= (OWL_SD_CTL_TS | OWL_SD_CTL_LBE | 0x64000000);
+ } else {
+ mode &= ~(OWL_SD_CTL_TOUTEN | OWL_SD_CTL_LBE);
+ mode |= OWL_SD_CTL_TS;
+ }
+
+ owl_host->cmd = cmd;
+
+ /* Start transfer */
+ writel(mode, owl_host->base + OWL_REG_SD_CTL);
+
+ if (data)
+ return;
+
+ timeout = msecs_to_jiffies(cmd->busy_timeout ? cmd->busy_timeout :
+ OWL_CMD_TIMEOUT_MS);
+
+ if (!wait_for_completion_timeout(&owl_host->sdc_complete, timeout)) {
+ dev_err(owl_host->dev, "CMD interrupt timeout\n");
+ cmd->error = -ETIMEDOUT;
+ return;
+ }
+
+ state = readl(owl_host->base + OWL_REG_SD_STATE);
+ if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
+ if (cmd_rsp_mask & state) {
+ if (state & OWL_SD_STATE_CLNR) {
+ dev_err(owl_host->dev, "Error CMD_NO_RSP\n");
+ cmd->error = -EILSEQ;
+ return;
+ }
+
+ if (state & OWL_SD_STATE_CRC7ER) {
+ dev_err(owl_host->dev, "Error CMD_RSP_CRC\n");
+ cmd->error = -EILSEQ;
+ return;
+ }
+ }
+
+ if (mmc_resp_type(cmd) & MMC_RSP_136) {
+ cmd->resp[3] = readl(owl_host->base + OWL_REG_SD_RSPBUF0);
+ cmd->resp[2] = readl(owl_host->base + OWL_REG_SD_RSPBUF1);
+ cmd->resp[1] = readl(owl_host->base + OWL_REG_SD_RSPBUF2);
+ cmd->resp[0] = readl(owl_host->base + OWL_REG_SD_RSPBUF3);
+ } else {
+ resp[0] = readl(owl_host->base + OWL_REG_SD_RSPBUF0);
+ resp[1] = readl(owl_host->base + OWL_REG_SD_RSPBUF1);
+ cmd->resp[0] = resp[1] << 24 | resp[0] >> 8;
+ cmd->resp[1] = resp[1] >> 8;
+ }
+ }
+}
+
+static void owl_mmc_dma_complete(void *param)
+{
+ struct owl_mmc_host *owl_host = param;
+ struct mmc_data *data = owl_host->data;
+
+ if (data)
+ complete(&owl_host->dma_complete);
+}
+
+static int owl_mmc_prepare_data(struct owl_mmc_host *owl_host,
+ struct mmc_data *data)
+{
+ u32 total;
+
+ owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN, OWL_SD_EN_BSEL,
+ true);
+ writel(data->blocks, owl_host->base + OWL_REG_SD_BLK_NUM);
+ writel(data->blksz, owl_host->base + OWL_REG_SD_BLK_SIZE);
+ total = data->blksz * data->blocks;
+
+ if (total < 512)
+ writel(total, owl_host->base + OWL_REG_SD_BUF_SIZE);
+ else
+ writel(512, owl_host->base + OWL_REG_SD_BUF_SIZE);
+
+ if (data->flags & MMC_DATA_WRITE) {
+ owl_host->dma_dir = DMA_TO_DEVICE;
+ owl_host->dma_cfg.direction = DMA_MEM_TO_DEV;
+ } else {
+ owl_host->dma_dir = DMA_FROM_DEVICE;
+ owl_host->dma_cfg.direction = DMA_DEV_TO_MEM;
+ }
+
+ dma_map_sg(owl_host->dma->device->dev, data->sg,
+ data->sg_len, owl_host->dma_dir);
+
+ dmaengine_slave_config(owl_host->dma, &owl_host->dma_cfg);
+ owl_host->desc = dmaengine_prep_slave_sg(owl_host->dma, data->sg,
+ data->sg_len,
+ owl_host->dma_cfg.direction,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+ if (!owl_host->desc) {
+ dev_err(owl_host->dev, "Can't prepare slave sg\n");
+ return -EBUSY;
+ }
+
+ owl_host->data = data;
+
+ owl_host->desc->callback = owl_mmc_dma_complete;
+ owl_host->desc->callback_param = (void *)owl_host;
+ data->error = 0;
+
+ return 0;
+}
+
+static void owl_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct owl_mmc_host *owl_host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+ int ret;
+
+ owl_host->mrq = mrq;
+ if (mrq->data) {
+ ret = owl_mmc_prepare_data(owl_host, data);
+ if (ret < 0) {
+ data->error = ret;
+ goto err_out;
+ }
+
+ init_completion(&owl_host->dma_complete);
+ dmaengine_submit(owl_host->desc);
+ dma_async_issue_pending(owl_host->dma);
+ }
+
+ owl_mmc_send_cmd(owl_host, mrq->cmd, data);
+
+ if (data) {
+ if (!wait_for_completion_timeout(&owl_host->sdc_complete,
+ 10 * HZ)) {
+ dev_err(owl_host->dev, "CMD interrupt timeout\n");
+ mrq->cmd->error = -ETIMEDOUT;
+ dmaengine_terminate_all(owl_host->dma);
+ goto err_out;
+ }
+
+ if (!wait_for_completion_timeout(&owl_host->dma_complete,
+ 5 * HZ)) {
+ dev_err(owl_host->dev, "DMA interrupt timeout\n");
+ mrq->cmd->error = -ETIMEDOUT;
+ dmaengine_terminate_all(owl_host->dma);
+ goto err_out;
+ }
+
+ if (data->stop)
+ owl_mmc_send_cmd(owl_host, data->stop, NULL);
+
+ data->bytes_xfered = data->blocks * data->blksz;
+ }
+
+err_out:
+ owl_mmc_finish_request(owl_host);
+}
+
+static int owl_mmc_set_clk_rate(struct owl_mmc_host *owl_host,
+ unsigned int rate)
+{
+ unsigned long clk_rate;
+ int ret;
+ u32 reg;
+
+ reg = readl(owl_host->base + OWL_REG_SD_CTL);
+ reg &= ~OWL_SD_CTL_DELAY_MSK;
+
+ /* Set RDELAY and WDELAY based on the clock */
+ if (rate <= 1000000) {
+ writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_DELAY_LOW_CLK) |
+ OWL_SD_CTL_WDELAY(OWL_SD_DELAY_LOW_CLK),
+ owl_host->base + OWL_REG_SD_CTL);
+ } else if ((rate > 1000000) && (rate <= 26000000)) {
+ writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_DELAY_MID_CLK) |
+ OWL_SD_CTL_WDELAY(OWL_SD_DELAY_MID_CLK),
+ owl_host->base + OWL_REG_SD_CTL);
+ } else if ((rate > 26000000) && (rate <= 52000000) && !owl_host->ddr_50) {
+ writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_DELAY_HIGH_CLK) |
+ OWL_SD_CTL_WDELAY(OWL_SD_DELAY_HIGH_CLK),
+ owl_host->base + OWL_REG_SD_CTL);
+ /* DDR50 mode has special delay chain */
+ } else if ((rate > 26000000) && (rate <= 52000000) && owl_host->ddr_50) {
+ writel(reg | OWL_SD_CTL_RDELAY(OWL_SD_RDELAY_DDR50) |
+ OWL_SD_CTL_WDELAY(OWL_SD_WDELAY_DDR50),
+ owl_host->base + OWL_REG_SD_CTL);
+ } else {
+ dev_err(owl_host->dev, "SD clock rate not supported\n");
+ return -EINVAL;
+ }
+
+ clk_rate = clk_round_rate(owl_host->clk, rate << 1);
+ ret = clk_set_rate(owl_host->clk, clk_rate);
+
+ return ret;
+}
+
+static void owl_mmc_set_clk(struct owl_mmc_host *owl_host, struct mmc_ios *ios)
+{
+ if (!ios->clock)
+ return;
+
+ owl_host->clock = ios->clock;
+ owl_mmc_set_clk_rate(owl_host, ios->clock);
+}
+
+static void owl_mmc_set_bus_width(struct owl_mmc_host *owl_host,
+ struct mmc_ios *ios)
+{
+ u32 reg;
+
+ reg = readl(owl_host->base + OWL_REG_SD_EN);
+ reg &= ~0x03;
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ break;
+ case MMC_BUS_WIDTH_4:
+ reg |= OWL_SD_EN_DATAWID(1);
+ break;
+ case MMC_BUS_WIDTH_8:
+ reg |= OWL_SD_EN_DATAWID(2);
+ break;
+ }
+
+ writel(reg, owl_host->base + OWL_REG_SD_EN);
+}
+
+static void owl_mmc_ctr_reset(struct owl_mmc_host *owl_host)
+{
+ reset_control_assert(owl_host->reset);
+ udelay(20);
+ reset_control_deassert(owl_host->reset);
+}
+
+static void owl_mmc_power_on(struct owl_mmc_host *owl_host)
+{
+ u32 mode;
+
+ init_completion(&owl_host->sdc_complete);
+
+ /* Enable transfer end IRQ */
+ owl_mmc_update_reg(owl_host->base + OWL_REG_SD_STATE,
+ OWL_SD_STATE_TEIE, true);
+
+ /* Send init clk */
+ mode = (readl(owl_host->base + OWL_REG_SD_CTL) & (0xff << 16));
+ mode |= OWL_SD_CTL_TS | OWL_SD_CTL_TCN(5) | OWL_SD_CTL_TM(8);
+ writel(mode, owl_host->base + OWL_REG_SD_CTL);
+
+ if (!wait_for_completion_timeout(&owl_host->sdc_complete, HZ)) {
+ dev_err(owl_host->dev, "CMD interrupt timeout\n");
+ return;
+ }
+}
+
+static void owl_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct owl_mmc_host *owl_host = mmc_priv(mmc);
+
+ switch (ios->power_mode) {
+ case MMC_POWER_UP:
+ dev_dbg(owl_host->dev, "Powering card up\n");
+
+ /* Reset the SDC controller to clear all previous states */
+ owl_mmc_ctr_reset(owl_host);
+ clk_prepare_enable(owl_host->clk);
+ writel(OWL_SD_ENABLE | OWL_SD_EN_RESE,
+ owl_host->base + OWL_REG_SD_EN);
+
+ break;
+
+ case MMC_POWER_ON:
+ dev_dbg(owl_host->dev, "Powering card on\n");
+ owl_mmc_power_on(owl_host);
+
+ break;
+
+ case MMC_POWER_OFF:
+ dev_dbg(owl_host->dev, "Powering card off\n");
+ clk_disable_unprepare(owl_host->clk);
+
+ return;
+
+ default:
+ dev_dbg(owl_host->dev, "Ignoring unknown card power state\n");
+ break;
+ }
+
+ if (ios->clock != owl_host->clock)
+ owl_mmc_set_clk(owl_host, ios);
+
+ owl_mmc_set_bus_width(owl_host, ios);
+
+ /* Enable DDR mode if requested */
+ if (ios->timing == MMC_TIMING_UHS_DDR50) {
+ owl_host->ddr_50 = 1;
+ owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN,
+ OWL_SD_EN_DDREN, true);
+ } else {
+ owl_host->ddr_50 = 0;
+ }
+}
+
+static int owl_mmc_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct owl_mmc_host *owl_host = mmc_priv(mmc);
+
+ /* It is enough to change the pad ctrl bit for voltage switch */
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN,
+ OWL_SD_EN_S18EN, false);
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ owl_mmc_update_reg(owl_host->base + OWL_REG_SD_EN,
+ OWL_SD_EN_S18EN, true);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static const struct mmc_host_ops owl_mmc_ops = {
+ .request = owl_mmc_request,
+ .set_ios = owl_mmc_set_ios,
+ .get_ro = mmc_gpio_get_ro,
+ .get_cd = mmc_gpio_get_cd,
+ .start_signal_voltage_switch = owl_mmc_start_signal_voltage_switch,
+};
+
+static int owl_mmc_probe(struct platform_device *pdev)
+{
+ struct owl_mmc_host *owl_host;
+ struct mmc_host *mmc;
+ struct resource *res;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(struct owl_mmc_host), &pdev->dev);
+ if (!mmc) {
+ dev_err(&pdev->dev, "mmc alloc host failed\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, mmc);
+
+ owl_host = mmc_priv(mmc);
+ owl_host->dev = &pdev->dev;
+ owl_host->mmc = mmc;
+ spin_lock_init(&owl_host->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ owl_host->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(owl_host->base)) {
+ dev_err(&pdev->dev, "Failed to remap registers\n");
+ ret = PTR_ERR(owl_host->base);
+ goto err_free_host;
+ }
+
+ owl_host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(owl_host->clk)) {
+ dev_err(&pdev->dev, "No clock defined\n");
+ ret = PTR_ERR(owl_host->clk);
+ goto err_free_host;
+ }
+
+ owl_host->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(owl_host->reset)) {
+ dev_err(&pdev->dev, "Could not get reset control\n");
+ ret = PTR_ERR(owl_host->reset);
+ goto err_free_host;
+ }
+
+ mmc->ops = &owl_mmc_ops;
+ mmc->max_blk_count = 512;
+ mmc->max_blk_size = 512;
+ mmc->max_segs = 256;
+ mmc->max_seg_size = 262144;
+ mmc->max_req_size = 262144;
+ /* 100kHz ~ 52MHz */
+ mmc->f_min = 100000;
+ mmc->f_max = 52000000;
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_4_BIT_DATA;
+ mmc->caps2 = (MMC_CAP2_BOOTPART_NOACC | MMC_CAP2_NO_SDIO);
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 |
+ MMC_VDD_165_195;
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto err_free_host;
+
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ owl_host->dma = dma_request_chan(&pdev->dev, "mmc");
+ if (IS_ERR(owl_host->dma)) {
+ dev_err(owl_host->dev, "Failed to get external DMA channel.\n");
+ ret = PTR_ERR(owl_host->dma);
+ goto err_free_host;
+ }
+
+ dev_info(&pdev->dev, "Using %s for DMA transfers\n",
+ dma_chan_name(owl_host->dma));
+
+ owl_host->dma_cfg.src_addr = res->start + OWL_REG_SD_DAT;
+ owl_host->dma_cfg.dst_addr = res->start + OWL_REG_SD_DAT;
+ owl_host->dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ owl_host->dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ owl_host->dma_cfg.device_fc = false;
+
+ owl_host->irq = platform_get_irq(pdev, 0);
+ if (owl_host->irq < 0) {
+ ret = -EINVAL;
+ goto err_release_channel;
+ }
+
+ ret = devm_request_irq(&pdev->dev, owl_host->irq, owl_irq_handler,
+ 0, dev_name(&pdev->dev), owl_host);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request irq %d\n",
+ owl_host->irq);
+ goto err_release_channel;
+ }
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add host\n");
+ goto err_release_channel;
+ }
+
+ dev_dbg(&pdev->dev, "Owl MMC Controller Initialized\n");
+
+ return 0;
+
+err_release_channel:
+ dma_release_channel(owl_host->dma);
+err_free_host:
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int owl_mmc_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct owl_mmc_host *owl_host = mmc_priv(mmc);
+
+ mmc_remove_host(mmc);
+ disable_irq(owl_host->irq);
+ dma_release_channel(owl_host->dma);
+ mmc_free_host(mmc);
+
+ return 0;
+}
+
+static const struct of_device_id owl_mmc_of_match[] = {
+ {.compatible = "actions,owl-mmc",},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, owl_mmc_of_match);
+
+static struct platform_driver owl_mmc_driver = {
+ .driver = {
+ .name = "owl_mmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = owl_mmc_of_match,
+ },
+ .probe = owl_mmc_probe,
+ .remove = owl_mmc_remove,
+};
+module_platform_driver(owl_mmc_driver);
+
+MODULE_DESCRIPTION("Actions Semi Owl SoCs SD/MMC Driver");
+MODULE_AUTHOR("Actions Semi");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 953e745..316393c 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -710,17 +710,19 @@
platform_set_drvdata(pdev, mmc);
- host->dma_chan_rx = dma_request_slave_channel(dev, "rx");
- if (host->dma_chan_rx == NULL) {
+ host->dma_chan_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(host->dma_chan_rx)) {
dev_err(dev, "unable to request rx dma channel\n");
- ret = -ENODEV;
+ ret = PTR_ERR(host->dma_chan_rx);
+ host->dma_chan_rx = NULL;
goto out;
}
- host->dma_chan_tx = dma_request_slave_channel(dev, "tx");
- if (host->dma_chan_tx == NULL) {
+ host->dma_chan_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(host->dma_chan_tx)) {
dev_err(dev, "unable to request tx dma channel\n");
- ret = -ENODEV;
+ ret = PTR_ERR(host->dma_chan_tx);
+ host->dma_chan_tx = NULL;
goto out;
}
@@ -735,7 +737,7 @@
}
/* FIXME: should we pass detection delay to debounce? */
- ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
if (ret && ret != -ENOENT) {
dev_err(dev, "Failed requesting gpio_cd\n");
goto out;
@@ -744,7 +746,7 @@
if (!host->pdata->gpio_card_ro_invert)
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL);
+ ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0);
if (ret && ret != -ENOENT) {
dev_err(dev, "Failed requesting gpio_ro\n");
goto out;
@@ -810,6 +812,7 @@
.remove = pxamci_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(pxa_mmc_dt_ids),
},
};
diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
index c0504aa..cb962c7 100644
--- a/drivers/mmc/host/renesas_sdhi.h
+++ b/drivers/mmc/host/renesas_sdhi.h
@@ -14,8 +14,8 @@
struct renesas_sdhi_scc {
unsigned long clk_rate; /* clock rate for SDR104 */
- u32 tap; /* sampling clock position for SDR104 */
- u32 tap_hs400; /* sampling clock position for HS400 */
+ u32 tap; /* sampling clock position for SDR104/HS400 (8 TAP) */
+ u32 tap_hs400_4tap; /* sampling clock position for HS400 (4 TAP) */
};
struct renesas_sdhi_of_data {
@@ -33,6 +33,15 @@
unsigned short max_segs;
};
+#define SDHI_CALIB_TABLE_MAX 32
+
+struct renesas_sdhi_quirks {
+ bool hs400_disabled;
+ bool hs400_4taps;
+ u32 hs400_bad_taps;
+ const u8 (*hs400_calib_table)[SDHI_CALIB_TABLE_MAX];
+};
+
struct tmio_mmc_dma {
enum dma_slave_buswidth dma_buswidth;
bool (*filter)(struct dma_chan *chan, void *arg);
@@ -46,11 +55,21 @@
struct clk *clk_cd;
struct tmio_mmc_data mmc_data;
struct tmio_mmc_dma dma_priv;
+ const struct renesas_sdhi_quirks *quirks;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_default, *pins_uhs;
void __iomem *scc_ctl;
u32 scc_tappos;
u32 scc_tappos_hs400;
+ const u8 *adjust_hs400_calib_table;
+ bool needs_adjust_hs400;
+
+ /* Tuning values: 1 for success, 0 for failure */
+ DECLARE_BITMAP(taps, BITS_PER_LONG);
+ /* Sampling data comparison: 1 for match, 0 for mismatch */
+ DECLARE_BITMAP(smpcmp, BITS_PER_LONG);
+ unsigned int tap_num;
+ unsigned int tap_set;
};
#define host_to_priv(host) \
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 689eb11..782879d 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -24,7 +24,9 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_dma.h>
@@ -46,10 +48,7 @@
#define SDHI_VER_GEN3_SD 0xcc10
#define SDHI_VER_GEN3_SDMMC 0xcd10
-struct renesas_sdhi_quirks {
- bool hs400_disabled;
- bool hs400_4taps;
-};
+#define SDHI_GEN3_MMC0_ADDR 0xee140000
static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
{
@@ -87,16 +86,11 @@
{
struct mmc_host *mmc = host->mmc;
struct renesas_sdhi *priv = host_to_priv(host);
- int ret = clk_prepare_enable(priv->clk);
-
- if (ret < 0)
- return ret;
+ int ret;
ret = clk_prepare_enable(priv->clk_cd);
- if (ret < 0) {
- clk_disable_unprepare(priv->clk);
+ if (ret < 0)
return ret;
- }
/*
* The clock driver may not know what maximum frequency
@@ -126,8 +120,12 @@
unsigned int freq, diff, best_freq = 0, diff_min = ~0;
int i;
- /* tested only on R-Car Gen2+ currently; may work for others */
- if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+ /*
+ * We simply return the current rate if a) we are not on a R-Car Gen2+
+ * SoC (may work for others, but untested) or b) if the SCC needs its
+ * clock during tuning, so we don't change the external clock setup.
+ */
+ if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2) || mmc_doing_tune(host->mmc))
return clk_get_rate(priv->clk);
/*
@@ -202,7 +200,6 @@
{
struct renesas_sdhi *priv = host_to_priv(host);
- clk_disable_unprepare(priv->clk);
clk_disable_unprepare(priv->clk_cd);
}
@@ -242,7 +239,7 @@
MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL;
ret = mmc_regulator_set_vqmmc(host->mmc, ios);
- if (ret)
+ if (ret < 0)
return ret;
return pinctrl_select_state(priv->pinctrl, pin_state);
@@ -255,23 +252,67 @@
#define SH_MOBILE_SDHI_SCC_CKSEL 0x006
#define SH_MOBILE_SDHI_SCC_RVSCNTL 0x008
#define SH_MOBILE_SDHI_SCC_RVSREQ 0x00A
+#define SH_MOBILE_SDHI_SCC_SMPCMP 0x00C
#define SH_MOBILE_SDHI_SCC_TMPPORT2 0x00E
+#define SH_MOBILE_SDHI_SCC_TMPPORT3 0x014
+#define SH_MOBILE_SDHI_SCC_TMPPORT4 0x016
+#define SH_MOBILE_SDHI_SCC_TMPPORT5 0x018
+#define SH_MOBILE_SDHI_SCC_TMPPORT6 0x01A
+#define SH_MOBILE_SDHI_SCC_TMPPORT7 0x01C
-/* Definitions for values the SH_MOBILE_SDHI_SCC_DTCNTL register */
#define SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN BIT(0)
#define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16
#define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff
-/* Definitions for values the SH_MOBILE_SDHI_SCC_CKSEL register */
#define SH_MOBILE_SDHI_SCC_CKSEL_DTSEL BIT(0)
-/* Definitions for values the SH_MOBILE_SDHI_SCC_RVSCNTL register */
+
#define SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN BIT(0)
-/* Definitions for values the SH_MOBILE_SDHI_SCC_RVSREQ register */
+
+#define SH_MOBILE_SDHI_SCC_RVSREQ_REQTAPDOWN BIT(0)
+#define SH_MOBILE_SDHI_SCC_RVSREQ_REQTAPUP BIT(1)
#define SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR BIT(2)
-/* Definitions for values the SH_MOBILE_SDHI_SCC_TMPPORT2 register */
+
+#define SH_MOBILE_SDHI_SCC_SMPCMP_CMD_REQDOWN BIT(8)
+#define SH_MOBILE_SDHI_SCC_SMPCMP_CMD_REQUP BIT(24)
+#define SH_MOBILE_SDHI_SCC_SMPCMP_CMD_ERR (BIT(8) | BIT(24))
+
#define SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL BIT(4)
#define SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN BIT(31)
+/* Definitions for values the SH_MOBILE_SDHI_SCC_TMPPORT4 register */
+#define SH_MOBILE_SDHI_SCC_TMPPORT4_DLL_ACC_START BIT(0)
+
+/* Definitions for values the SH_MOBILE_SDHI_SCC_TMPPORT5 register */
+#define SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_RW_SEL_R BIT(8)
+#define SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_RW_SEL_W (0 << 8)
+#define SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_ADR_MASK 0x3F
+
+/* Definitions for values the SH_MOBILE_SDHI_SCC register */
+#define SH_MOBILE_SDHI_SCC_TMPPORT_DISABLE_WP_CODE 0xa5000000
+#define SH_MOBILE_SDHI_SCC_TMPPORT_CALIB_CODE_MASK 0x1f
+#define SH_MOBILE_SDHI_SCC_TMPPORT_MANUAL_MODE BIT(7)
+
+static const u8 r8a7796_es13_calib_table[2][SDHI_CALIB_TABLE_MAX] = {
+ { 3, 3, 3, 3, 3, 3, 3, 4, 4, 5, 6, 7, 8, 9, 10, 15,
+ 16, 16, 16, 16, 16, 16, 17, 18, 18, 19, 20, 21, 22, 23, 24, 25 },
+ { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 7, 8, 11,
+ 12, 17, 18, 18, 18, 18, 18, 18, 18, 19, 20, 21, 22, 23, 25, 25 }
+};
+
+static const u8 r8a77965_calib_table[2][SDHI_CALIB_TABLE_MAX] = {
+ { 1, 2, 6, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 15, 15, 16,
+ 17, 18, 19, 20, 21, 22, 23, 24, 25, 25, 26, 27, 28, 29, 30, 31 },
+ { 2, 3, 4, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,
+ 17, 17, 20, 21, 22, 23, 24, 25, 27, 28, 29, 30, 31, 31, 31, 31 }
+};
+
+static const u8 r8a77990_calib_table[2][SDHI_CALIB_TABLE_MAX] = {
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 1, 2, 3, 3, 4, 4, 4, 5, 5, 6, 8, 9, 10,
+ 11, 12, 13, 15, 16, 17, 17, 18, 18, 19, 20, 22, 24, 25, 26, 26 }
+};
+
static inline u32 sd_scc_read32(struct tmio_mmc_host *host,
struct renesas_sdhi *priv, int addr)
{
@@ -321,18 +362,12 @@
SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK;
}
-static void renesas_sdhi_prepare_tuning(struct tmio_mmc_host *host,
- unsigned long tap)
+static void renesas_sdhi_hs400_complete(struct mmc_host *mmc)
{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
struct renesas_sdhi *priv = host_to_priv(host);
-
- /* Set sampling clock position */
- sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap);
-}
-
-static void renesas_sdhi_hs400_complete(struct tmio_mmc_host *host)
-{
- struct renesas_sdhi *priv = host_to_priv(host);
+ u32 bad_taps = priv->quirks ? priv->quirks->hs400_bad_taps : 0;
+ bool use_4tap = priv->quirks && priv->quirks->hs400_4taps;
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
@@ -344,6 +379,12 @@
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF,
priv->scc_tappos_hs400);
+ /* Gen3 can't do automatic tap correction with HS400, so disable it */
+ if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN3_SDMMC)
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
+ ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
+ sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
+
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2,
(SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN |
SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) |
@@ -354,10 +395,23 @@
SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN |
0x4 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT);
+ /* Avoid bad TAP */
+ if (bad_taps & BIT(priv->tap_set)) {
+ u32 new_tap = (priv->tap_set + 1) % priv->tap_num;
- if (host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400)
- sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET,
- host->tap_set / 2);
+ if (bad_taps & BIT(new_tap))
+ new_tap = (priv->tap_set - 1) % priv->tap_num;
+
+ if (bad_taps & BIT(new_tap)) {
+ new_tap = priv->tap_set;
+ dev_dbg(&host->pdev->dev, "Can't handle three bad tap in a row\n");
+ }
+
+ priv->tap_set = new_tap;
+ }
+
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET,
+ priv->tap_set / (use_4tap ? 2 : 1));
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL,
SH_MOBILE_SDHI_SCC_CKSEL_DTSEL |
@@ -365,6 +419,9 @@
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+ if (priv->adjust_hs400_calib_table)
+ priv->needs_adjust_hs400 = true;
}
static void renesas_sdhi_reset_scc(struct tmio_mmc_host *host,
@@ -379,8 +436,9 @@
SH_MOBILE_SDHI_SCC_CKSEL));
}
-static void renesas_sdhi_disable_scc(struct tmio_mmc_host *host)
+static void renesas_sdhi_disable_scc(struct mmc_host *mmc)
{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
struct renesas_sdhi *priv = host_to_priv(host);
renesas_sdhi_reset_scc(host, priv);
@@ -394,6 +452,74 @@
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
}
+static u32 sd_scc_tmpport_read32(struct tmio_mmc_host *host,
+ struct renesas_sdhi *priv, u32 addr)
+{
+ /* read mode */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT5,
+ SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_RW_SEL_R |
+ (SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_ADR_MASK & addr));
+
+ /* access start and stop */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT4,
+ SH_MOBILE_SDHI_SCC_TMPPORT4_DLL_ACC_START);
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT4, 0);
+
+ return sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT7);
+}
+
+static void sd_scc_tmpport_write32(struct tmio_mmc_host *host,
+ struct renesas_sdhi *priv, u32 addr, u32 val)
+{
+ /* write mode */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT5,
+ SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_RW_SEL_W |
+ (SH_MOBILE_SDHI_SCC_TMPPORT5_DLL_ADR_MASK & addr));
+
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT6, val);
+
+ /* access start and stop */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT4,
+ SH_MOBILE_SDHI_SCC_TMPPORT4_DLL_ACC_START);
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT4, 0);
+}
+
+static void renesas_sdhi_adjust_hs400_mode_enable(struct tmio_mmc_host *host)
+{
+ struct renesas_sdhi *priv = host_to_priv(host);
+ u32 calib_code;
+
+ /* disable write protect */
+ sd_scc_tmpport_write32(host, priv, 0x00,
+ SH_MOBILE_SDHI_SCC_TMPPORT_DISABLE_WP_CODE);
+ /* read calibration code and adjust */
+ calib_code = sd_scc_tmpport_read32(host, priv, 0x26);
+ calib_code &= SH_MOBILE_SDHI_SCC_TMPPORT_CALIB_CODE_MASK;
+
+ sd_scc_tmpport_write32(host, priv, 0x22,
+ SH_MOBILE_SDHI_SCC_TMPPORT_MANUAL_MODE |
+ priv->adjust_hs400_calib_table[calib_code]);
+
+ /* set offset value to TMPPORT3, hardcoded to OFFSET0 (= 0x3) for now */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT3, 0x3);
+
+ /* adjustment done, clear flag */
+ priv->needs_adjust_hs400 = false;
+}
+
+static void renesas_sdhi_adjust_hs400_mode_disable(struct tmio_mmc_host *host)
+{
+ struct renesas_sdhi *priv = host_to_priv(host);
+
+ /* disable write protect */
+ sd_scc_tmpport_write32(host, priv, 0x00,
+ SH_MOBILE_SDHI_SCC_TMPPORT_DISABLE_WP_CODE);
+ /* disable manual calibration */
+ sd_scc_tmpport_write32(host, priv, 0x22, 0);
+ /* clear offset value of TMPPORT3 */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT3, 0);
+}
+
static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host,
struct renesas_sdhi *priv)
{
@@ -411,27 +537,50 @@
SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) &
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2));
+ if (priv->adjust_hs400_calib_table)
+ renesas_sdhi_adjust_hs400_mode_disable(host);
+
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
}
-static void renesas_sdhi_prepare_hs400_tuning(struct tmio_mmc_host *host)
+static int renesas_sdhi_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+
renesas_sdhi_reset_hs400_mode(host, host_to_priv(host));
+ return 0;
}
-#define SH_MOBILE_SDHI_MAX_TAP 3
+static void renesas_sdhi_reset(struct tmio_mmc_host *host)
+{
+ struct renesas_sdhi *priv = host_to_priv(host);
+
+ renesas_sdhi_reset_scc(host, priv);
+ renesas_sdhi_reset_hs400_mode(host, priv);
+ priv->needs_adjust_hs400 = false;
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
+ ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
+ sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
+
+ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+ sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK,
+ TMIO_MASK_INIT_RCAR2);
+}
+
+#define SH_MOBILE_SDHI_MIN_TAP_ROW 3
static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host)
{
struct renesas_sdhi *priv = host_to_priv(host);
- unsigned long tap_cnt; /* counter of tuning success */
- unsigned long tap_start;/* start position of tuning success */
- unsigned long tap_end; /* end position of tuning success */
- unsigned long ntap; /* temporary counter of tuning success */
- unsigned long i;
+ unsigned int tap_start = 0, tap_end = 0, tap_cnt = 0, rs, re, i;
+ unsigned int taps_size = priv->tap_num * 2, min_tap_row;
+ unsigned long *bitmap;
- /* Clear SCC_RVSREQ */
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
/*
@@ -439,48 +588,48 @@
* result requiring the tap to be good in both runs before
* considering it for tuning selection.
*/
- for (i = 0; i < host->tap_num * 2; i++) {
- int offset = host->tap_num * (i < host->tap_num ? 1 : -1);
+ for (i = 0; i < taps_size; i++) {
+ int offset = priv->tap_num * (i < priv->tap_num ? 1 : -1);
- if (!test_bit(i, host->taps))
- clear_bit(i + offset, host->taps);
+ if (!test_bit(i, priv->taps))
+ clear_bit(i + offset, priv->taps);
+
+ if (!test_bit(i, priv->smpcmp))
+ clear_bit(i + offset, priv->smpcmp);
}
/*
- * Find the longest consecutive run of successful probes. If that
- * is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the
- * center index as the tap.
+ * If all TAP are OK, the sampling clock position is selected by
+ * identifying the change point of data.
*/
- tap_cnt = 0;
- ntap = 0;
- tap_start = 0;
- tap_end = 0;
- for (i = 0; i < host->tap_num * 2; i++) {
- if (test_bit(i, host->taps)) {
- ntap++;
- } else {
- if (ntap > tap_cnt) {
- tap_start = i - ntap;
- tap_end = i - 1;
- tap_cnt = ntap;
- }
- ntap = 0;
+ if (bitmap_full(priv->taps, taps_size)) {
+ bitmap = priv->smpcmp;
+ min_tap_row = 1;
+ } else {
+ bitmap = priv->taps;
+ min_tap_row = SH_MOBILE_SDHI_MIN_TAP_ROW;
+ }
+
+ /*
+ * Find the longest consecutive run of successful probes. If that
+ * is at least SH_MOBILE_SDHI_MIN_TAP_ROW probes long then use the
+ * center index as the tap, otherwise bail out.
+ */
+ bitmap_for_each_set_region(bitmap, rs, re, 0, taps_size) {
+ if (re - rs > tap_cnt) {
+ tap_end = re;
+ tap_start = rs;
+ tap_cnt = tap_end - tap_start;
}
}
- if (ntap > tap_cnt) {
- tap_start = i - ntap;
- tap_end = i - 1;
- tap_cnt = ntap;
- }
-
- if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP)
- host->tap_set = (tap_start + tap_end) / 2 % host->tap_num;
+ if (tap_cnt >= min_tap_row)
+ priv->tap_set = (tap_start + tap_end) / 2 % priv->tap_num;
else
return -EIO;
/* Set SCC */
- sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, host->tap_set);
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, priv->tap_set);
/* Enable auto re-tuning */
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
@@ -490,10 +639,125 @@
return 0;
}
+static int renesas_sdhi_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ struct renesas_sdhi *priv = host_to_priv(host);
+ int i, ret;
+
+ priv->tap_num = renesas_sdhi_init_tuning(host);
+ if (!priv->tap_num)
+ return 0; /* Tuning is not supported */
+
+ if (priv->tap_num * 2 >= sizeof(priv->taps) * BITS_PER_BYTE) {
+ dev_err(&host->pdev->dev,
+ "Too many taps, please update 'taps' in tmio_mmc_host!\n");
+ return -EINVAL;
+ }
+
+ bitmap_zero(priv->taps, priv->tap_num * 2);
+ bitmap_zero(priv->smpcmp, priv->tap_num * 2);
+
+ /* Issue CMD19 twice for each tap */
+ for (i = 0; i < 2 * priv->tap_num; i++) {
+ int cmd_error = 0;
+
+ /* Set sampling clock position */
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % priv->tap_num);
+
+ if (mmc_send_tuning(mmc, opcode, &cmd_error) == 0)
+ set_bit(i, priv->taps);
+
+ if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_SMPCMP) == 0)
+ set_bit(i, priv->smpcmp);
+
+ if (cmd_error)
+ mmc_abort_tuning(mmc, opcode);
+ }
+
+ ret = renesas_sdhi_select_tuning(host);
+ if (ret < 0)
+ renesas_sdhi_reset(host);
+ return ret;
+}
+
+static bool renesas_sdhi_manual_correction(struct tmio_mmc_host *host, bool use_4tap)
+{
+ struct renesas_sdhi *priv = host_to_priv(host);
+ unsigned int new_tap = priv->tap_set, error_tap = priv->tap_set;
+ u32 val;
+
+ val = sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ);
+ if (!val)
+ return false;
+
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
+
+ /* Change TAP position according to correction status */
+ if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN3_SDMMC &&
+ host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
+ u32 bad_taps = priv->quirks ? priv->quirks->hs400_bad_taps : 0;
+ /*
+ * With HS400, the DAT signal is based on DS, not CLK.
+ * Therefore, use only CMD status.
+ */
+ u32 smpcmp = sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_SMPCMP) &
+ SH_MOBILE_SDHI_SCC_SMPCMP_CMD_ERR;
+ if (!smpcmp) {
+ return false; /* no error in CMD signal */
+ } else if (smpcmp == SH_MOBILE_SDHI_SCC_SMPCMP_CMD_REQUP) {
+ new_tap++;
+ error_tap--;
+ } else if (smpcmp == SH_MOBILE_SDHI_SCC_SMPCMP_CMD_REQDOWN) {
+ new_tap--;
+ error_tap++;
+ } else {
+ return true; /* need retune */
+ }
+
+ /*
+ * When new_tap is a bad tap, we cannot change. Then, we compare
+ * with the HS200 tuning result. When smpcmp[error_tap] is OK,
+ * we can at least retune.
+ */
+ if (bad_taps & BIT(new_tap % priv->tap_num))
+ return test_bit(error_tap % priv->tap_num, priv->smpcmp);
+ } else {
+ if (val & SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR)
+ return true; /* need retune */
+ else if (val & SH_MOBILE_SDHI_SCC_RVSREQ_REQTAPUP)
+ new_tap++;
+ else if (val & SH_MOBILE_SDHI_SCC_RVSREQ_REQTAPDOWN)
+ new_tap--;
+ else
+ return false;
+ }
+
+ priv->tap_set = (new_tap % priv->tap_num);
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET,
+ priv->tap_set / (use_4tap ? 2 : 1));
+
+ return false;
+}
+
+static bool renesas_sdhi_auto_correction(struct tmio_mmc_host *host)
+{
+ struct renesas_sdhi *priv = host_to_priv(host);
+
+ /* Check SCC error */
+ if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ) &
+ SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR) {
+ sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
+ return true;
+ }
+
+ return false;
+}
+
static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host)
{
struct renesas_sdhi *priv = host_to_priv(host);
- bool use_4tap = host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400;
+ bool use_4tap = priv->quirks && priv->quirks->hs400_4taps;
/*
* Skip checking SCC errors when running on 4 taps in HS400 mode as
@@ -504,45 +768,14 @@
!(host->mmc->ios.timing == MMC_TIMING_MMC_HS400 && !use_4tap))
return false;
- if (mmc_doing_retune(host->mmc))
+ if (mmc_doing_tune(host->mmc))
return false;
- /* Check SCC error */
if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL) &
- SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &&
- sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ) &
- SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR) {
- /* Clear SCC error */
- sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0);
- return true;
- }
+ SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN)
+ return renesas_sdhi_auto_correction(host);
- return false;
-}
-
-static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
-{
- struct renesas_sdhi *priv;
-
- priv = host_to_priv(host);
-
- renesas_sdhi_reset_scc(host, priv);
- renesas_sdhi_reset_hs400_mode(host, priv);
-
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
- sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-
- sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
- ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
- sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
-
- sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
- ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
- sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
-
- if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
- sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK,
- TMIO_MASK_INIT_RCAR2);
+ return renesas_sdhi_manual_correction(host, use_4tap);
}
static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)
@@ -578,7 +811,7 @@
case HOST_MODE:
if (host->pdata->flags & TMIO_MMC_HAVE_CBSY)
bit = TMIO_STAT_CMD_BUSY;
- /* fallthrough */
+ fallthrough;
case CTL_SD_CARD_CLK_CTL:
return renesas_sdhi_wait_idle(host, bit);
}
@@ -604,6 +837,13 @@
return blk_size;
}
+static void renesas_sdhi_fixup_request(struct tmio_mmc_host *host, struct mmc_request *mrq)
+{
+ struct renesas_sdhi *priv = host_to_priv(host);
+
+ if (priv->needs_adjust_hs400 && mrq->cmd->opcode == MMC_SEND_STATUS)
+ renesas_sdhi_adjust_hs400_mode_enable(host);
+}
static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
{
/* Iff regs are 8 byte apart, sdbuf is 64 bit. Otherwise always 32. */
@@ -620,18 +860,52 @@
static const struct renesas_sdhi_quirks sdhi_quirks_4tap = {
.hs400_4taps = true,
+ .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
};
static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = {
.hs400_disabled = true,
};
+static const struct renesas_sdhi_quirks sdhi_quirks_bad_taps1357 = {
+ .hs400_bad_taps = BIT(1) | BIT(3) | BIT(5) | BIT(7),
+};
+
+static const struct renesas_sdhi_quirks sdhi_quirks_bad_taps2367 = {
+ .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
+};
+
+static const struct renesas_sdhi_quirks sdhi_quirks_r8a7796_es13 = {
+ .hs400_4taps = true,
+ .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
+ .hs400_calib_table = r8a7796_es13_calib_table,
+};
+
+static const struct renesas_sdhi_quirks sdhi_quirks_r8a77965 = {
+ .hs400_bad_taps = BIT(2) | BIT(3) | BIT(6) | BIT(7),
+ .hs400_calib_table = r8a77965_calib_table,
+};
+
+static const struct renesas_sdhi_quirks sdhi_quirks_r8a77990 = {
+ .hs400_calib_table = r8a77990_calib_table,
+};
+
+/*
+ * Note for r8a7796 / r8a774a1: we can't distinguish ES1.1 and 1.2 as of now.
+ * So, we want to treat them equally and only have a match for ES1.2 to enforce
+ * this if there ever will be a way to distinguish ES1.2.
+ */
static const struct soc_device_attribute sdhi_quirks_match[] = {
+ { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 },
{ .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_4tap_nohs400 },
{ .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_4tap },
+ { .soc_id = "r8a7795", .revision = "ES3.*", .data = &sdhi_quirks_bad_taps2367 },
{ .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 },
- { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 },
+ { .soc_id = "r8a7796", .revision = "ES1.*", .data = &sdhi_quirks_r8a7796_es13 },
+ { .soc_id = "r8a77961", .data = &sdhi_quirks_bad_taps1357 },
+ { .soc_id = "r8a77965", .data = &sdhi_quirks_r8a77965 },
{ .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 },
+ { .soc_id = "r8a77990", .data = &sdhi_quirks_r8a77990 },
{ /* Sentinel. */ },
};
@@ -665,6 +939,7 @@
if (!priv)
return -ENOMEM;
+ priv->quirks = quirks;
mmc_data = &priv->mmc_data;
dma_priv = &priv->dma_priv;
@@ -724,9 +999,6 @@
if (quirks && quirks->hs400_disabled)
host->mmc->caps2 &= ~(MMC_CAP2_HS400 | MMC_CAP2_HS400_ES);
- if (quirks && quirks->hs400_4taps)
- mmc_data->flags |= TMIO_MMC_HAVE_4TAP_HS400;
-
/* For some SoC, we disable internal WP. GPIO may override this */
if (mmc_can_gpio_ro(host->mmc))
mmc_data->capabilities2 &= ~MMC_CAP2_NO_WRITE_PROTECT;
@@ -739,11 +1011,9 @@
renesas_sdhi_start_signal_voltage_switch;
host->sdcard_irq_setbit_mask = TMIO_STAT_ALWAYS_SET_27;
- /* SDR and HS200/400 registers requires HW reset */
if (of_data && of_data->scc_offset) {
priv->scc_ctl = host->ctl + of_data->scc_offset;
- host->mmc->caps |= MMC_CAP_HW_RESET;
- host->hw_reset = renesas_sdhi_hw_reset;
+ host->reset = renesas_sdhi_reset;
}
}
@@ -777,6 +1047,8 @@
/* All SDHI have SDIO status bits which must be 1 */
mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS;
+ dev_pm_domain_start(&pdev->dev);
+
ret = renesas_sdhi_clk_enable(host);
if (ret)
goto efree;
@@ -790,6 +1062,14 @@
if (ver == SDHI_VER_GEN2_SDR50)
mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY;
+ if (ver == SDHI_VER_GEN3_SDMMC && quirks && quirks->hs400_calib_table) {
+ host->fixup_request = renesas_sdhi_fixup_request;
+ priv->adjust_hs400_calib_table = *(
+ res->start == SDHI_GEN3_MMC0_ADDR ?
+ quirks->hs400_calib_table :
+ quirks->hs400_calib_table + 1);
+ }
+
ret = tmio_mmc_host_probe(host);
if (ret < 0)
goto edisclk;
@@ -800,29 +1080,29 @@
host->mmc->caps2 & (MMC_CAP2_HS200_1_8V_SDR |
MMC_CAP2_HS400_1_8V))) {
const struct renesas_sdhi_scc *taps = of_data->taps;
+ bool use_4tap = priv->quirks && priv->quirks->hs400_4taps;
bool hit = false;
for (i = 0; i < of_data->taps_num; i++) {
if (taps[i].clk_rate == 0 ||
taps[i].clk_rate == host->mmc->f_max) {
priv->scc_tappos = taps->tap;
- priv->scc_tappos_hs400 = taps->tap_hs400;
+ priv->scc_tappos_hs400 = use_4tap ?
+ taps->tap_hs400_4tap :
+ taps->tap;
hit = true;
break;
}
}
if (!hit)
- dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
+ dev_warn(&host->pdev->dev, "Unknown clock rate for tuning\n");
- host->init_tuning = renesas_sdhi_init_tuning;
- host->prepare_tuning = renesas_sdhi_prepare_tuning;
- host->select_tuning = renesas_sdhi_select_tuning;
- host->check_scc_error = renesas_sdhi_check_scc_error;
- host->prepare_hs400_tuning =
- renesas_sdhi_prepare_hs400_tuning;
- host->hs400_downgrade = renesas_sdhi_disable_scc;
- host->hs400_complete = renesas_sdhi_hs400_complete;
+ host->check_retune = renesas_sdhi_check_scc_error;
+ host->ops.execute_tuning = renesas_sdhi_execute_tuning;
+ host->ops.prepare_hs400_tuning = renesas_sdhi_prepare_hs400_tuning;
+ host->ops.hs400_downgrade = renesas_sdhi_disable_scc;
+ host->ops.hs400_complete = renesas_sdhi_hs400_complete;
}
num_irqs = platform_irq_count(pdev);
@@ -850,10 +1130,8 @@
goto eirq;
}
- dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n",
- mmc_hostname(host->mmc), (unsigned long)
- (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
- host->mmc->f_max / 1000000);
+ dev_info(&pdev->dev, "%s base at %pa, max clock rate %u MHz\n",
+ mmc_hostname(host->mmc), &res->start, host->mmc->f_max / 1000000);
return ret;
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index f54d042..f3e76d6 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -82,7 +82,7 @@
{
.clk_rate = 0,
.tap = 0x00000300,
- .tap_hs400 = 0x00000704,
+ .tap_hs400_4tap = 0x00000100,
},
};
@@ -233,6 +233,9 @@
{
enum dma_data_direction dir;
+ if (!host->dma_on)
+ return false;
+
if (!host->data)
return false;
@@ -247,6 +250,8 @@
if (dir == DMA_FROM_DEVICE)
clear_bit(SDHI_INTERNAL_DMAC_RX_IN_USE, &global_flags);
+ host->dma_on = false;
+
return true;
}
@@ -263,6 +268,12 @@
spin_unlock_irq(&host->lock);
}
+static void renesas_sdhi_internal_dmac_end_dma(struct tmio_mmc_host *host)
+{
+ if (host->data)
+ renesas_sdhi_internal_dmac_complete(host);
+}
+
static void
renesas_sdhi_internal_dmac_request_dma(struct tmio_mmc_host *host,
struct tmio_mmc_data *pdata)
@@ -300,47 +311,30 @@
.release = renesas_sdhi_internal_dmac_release_dma,
.abort = renesas_sdhi_internal_dmac_abort_dma,
.dataend = renesas_sdhi_internal_dmac_dataend_dma,
+ .end = renesas_sdhi_internal_dmac_end_dma,
};
/*
* Whitelist of specific R-Car Gen3 SoC ES versions to use this DMAC
* implementation as others may use a different implementation.
*/
-static const struct soc_device_attribute soc_whitelist[] = {
- /* specific ones */
+static const struct soc_device_attribute soc_dma_quirks[] = {
{ .soc_id = "r7s9210",
.data = (void *)BIT(SDHI_INTERNAL_DMAC_ADDR_MODE_FIXED_ONLY) },
{ .soc_id = "r8a7795", .revision = "ES1.*",
.data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) },
{ .soc_id = "r8a7796", .revision = "ES1.0",
.data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) },
- /* generic ones */
- { .soc_id = "r8a774a1" },
- { .soc_id = "r8a774c0" },
- { .soc_id = "r8a77470" },
- { .soc_id = "r8a7795" },
- { .soc_id = "r8a7796" },
- { .soc_id = "r8a77965" },
- { .soc_id = "r8a77970" },
- { .soc_id = "r8a77980" },
- { .soc_id = "r8a77990" },
- { .soc_id = "r8a77995" },
{ /* sentinel */ }
};
static int renesas_sdhi_internal_dmac_probe(struct platform_device *pdev)
{
- const struct soc_device_attribute *soc = soc_device_match(soc_whitelist);
+ const struct soc_device_attribute *soc = soc_device_match(soc_dma_quirks);
struct device *dev = &pdev->dev;
- if (!soc)
- return -ENODEV;
-
- global_flags |= (unsigned long)soc->data;
-
- dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms), GFP_KERNEL);
- if (!dev->dma_parms)
- return -ENOMEM;
+ if (soc)
+ global_flags |= (unsigned long)soc->data;
/* value is max of SD_SECCNT. Confirmed by HW engineers */
dma_set_max_seg_size(dev, 0xffffffff);
@@ -359,6 +353,7 @@
static struct platform_driver renesas_internal_dmac_sdhi_driver = {
.driver = {
.name = "renesas_sdhi_internal_dmac",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &renesas_sdhi_internal_dmac_dev_pm_ops,
.of_match_table = renesas_sdhi_internal_dmac_of_match,
},
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 13ff023..c5f7896 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -463,6 +463,7 @@
static struct platform_driver renesas_sys_dmac_sdhi_driver = {
.driver = {
.name = "sh_mobile_sdhi",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &renesas_sdhi_sys_dmac_dev_pm_ops,
.of_match_table = renesas_sdhi_sys_dmac_of_match,
},
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 9ff718b..e00167b 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -685,11 +685,11 @@
static void sd_wait_data_idle(struct realtek_pci_sdmmc *host)
{
- int err, i;
+ int i;
u8 val = 0;
for (i = 0; i < 100; i++) {
- err = rtsx_pci_read_register(host->pcr, SD_DATA_STATE, &val);
+ rtsx_pci_read_register(host->pcr, SD_DATA_STATE, &val);
if (val & SD_DATA_IDLE)
return;
@@ -1346,6 +1346,8 @@
mmc->caps |= MMC_CAP_1_8V_DDR;
if (pcr->extra_caps & EXTRA_CAPS_MMC_8BIT)
mmc->caps |= MMC_CAP_8_BIT_DATA;
+ if (pcr->extra_caps & EXTRA_CAPS_NO_MMC)
+ mmc->caps2 |= MMC_CAP2_NO_MMC;
}
static void realtek_init_host(struct realtek_pci_sdmmc *host)
@@ -1357,7 +1359,7 @@
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
- MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_ERASE;
+ MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
mmc->max_current_330 = 400;
mmc->max_current_180 = 800;
@@ -1479,6 +1481,7 @@
.id_table = rtsx_pci_sdmmc_ids,
.driver = {
.name = DRV_NAME_RTSX_PCI_SDMMC,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
module_platform_driver(rtsx_pci_sdmmc_driver);
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
index 81d0dfe..5fe4528 100644
--- a/drivers/mmc/host/rtsx_usb_sdmmc.c
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -579,7 +579,6 @@
static int sd_change_phase(struct rtsx_usb_sdmmc *host, u8 sample_point, int tx)
{
struct rtsx_ucr *ucr = host->ucr;
- int err;
dev_dbg(sdmmc_dev(host), "%s: %s sample_point = %d\n",
__func__, tx ? "TX" : "RX", sample_point);
@@ -601,11 +600,7 @@
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, 0);
rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_RST, 0);
- err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
- if (err)
- return err;
-
- return 0;
+ return rtsx_usb_send_cmd(ucr, MODE_C, 100);
}
static inline u32 get_phase_point(u32 phase_map, unsigned int idx)
@@ -654,12 +649,11 @@
static void sd_wait_data_idle(struct rtsx_usb_sdmmc *host)
{
- int err, i;
+ int i;
u8 val = 0;
for (i = 0; i < 100; i++) {
- err = rtsx_usb_ep0_read_register(host->ucr,
- SD_DATA_STATE, &val);
+ rtsx_usb_ep0_read_register(host->ucr, SD_DATA_STATE, &val);
if (val & SD_DATA_IDLE)
return;
@@ -1314,7 +1308,7 @@
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
- MMC_CAP_ERASE | MMC_CAP_SYNC_RUNTIME_PM;
+ MMC_CAP_SYNC_RUNTIME_PM;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE |
MMC_CAP2_NO_SDIO;
@@ -1459,6 +1453,7 @@
.id_table = rtsx_usb_sdmmc_ids,
.driver = {
.name = "rtsx_usb_sdmmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &rtsx_usb_sdmmc_dev_pm_ops,
},
};
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index bce9c33..643d54e 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -24,11 +24,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mmc/slot-gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/dma.h>
-#include <mach/gpio-samsung.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
@@ -150,8 +145,8 @@
static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
{
- u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
- u32 datcon, datcnt, datsta, fsta, imask;
+ u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer;
+ u32 datcon, datcnt, datsta, fsta;
con = readl(host->base + S3C2410_SDICON);
pre = readl(host->base + S3C2410_SDIPRE);
@@ -163,12 +158,10 @@
r2 = readl(host->base + S3C2410_SDIRSP2);
r3 = readl(host->base + S3C2410_SDIRSP3);
timer = readl(host->base + S3C2410_SDITIMER);
- bsize = readl(host->base + S3C2410_SDIBSIZE);
datcon = readl(host->base + S3C2410_SDIDCON);
datcnt = readl(host->base + S3C2410_SDIDCNT);
datsta = readl(host->base + S3C2410_SDIDSTA);
fsta = readl(host->base + S3C2410_SDIFSTA);
- imask = readl(host->base + host->sdiimsk);
dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n",
prefix, con, pre, timer);
@@ -307,7 +300,8 @@
static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
{
if (host->sdio_irqen) {
- if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+ if (host->pdata->bus[3] &&
+ gpiod_get_value(host->pdata->bus[3]) == 0) {
pr_debug("%s: signalling irq\n", __func__);
mmc_signal_sdio_irq(host->mmc);
}
@@ -396,9 +390,6 @@
local_irq_restore(flags);
}
-/**
- *
- */
static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
{
unsigned long flags;
@@ -958,13 +949,6 @@
{
u32 dcon, imsk, stoptries = 3;
- /* write DCON register */
-
- if (!data) {
- writel(0, host->base + S3C2410_SDIDCON);
- return 0;
- }
-
if ((data->blksz & 3) != 0) {
/* We cannot deal with unaligned blocks with more than
* one block being transferred. */
@@ -1213,33 +1197,20 @@
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- /* Configure GPE5...GPE10 pins in SD mode */
- if (!host->pdev->dev.of_node)
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
if (!host->is2440)
mci_con |= S3C2410_SDICON_FIFORESET;
-
break;
case MMC_POWER_OFF:
default:
- if (!host->pdev->dev.of_node)
- gpio_direction_output(S3C2410_GPE(5), 0);
-
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
-
- if (host->pdata->set_power)
- host->pdata->set_power(ios->power_mode, ios->vdd);
-
break;
}
+ if (host->pdata->set_power)
+ host->pdata->set_power(ios->power_mode, ios->vdd);
+
s3cmci_set_clk(host, ios);
/* Set CLOCK_ENABLE */
@@ -1317,13 +1288,6 @@
.enable_sdio_irq = s3cmci_enable_sdio_irq,
};
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
- /* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reasonable defaults are picked. */
- .no_wprotect = 1,
- .no_detect = 1,
-};
-
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3cmci_cpufreq_transition(struct notifier_block *nb,
@@ -1386,7 +1350,7 @@
{
struct s3cmci_host *host = seq->private;
- seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
+ seq_printf(seq, "Register base = 0x%p\n", host->base);
seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
seq_printf(seq, "Prescale = %d\n", host->prescaler);
seq_printf(seq, "is2440 = %d\n", host->is2440);
@@ -1477,23 +1441,20 @@
int i, ret;
host->is2440 = platform_get_device_id(pdev)->driver_data;
-
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
- ret = gpio_request(i, dev_name(&pdev->dev));
- if (ret) {
- dev_err(&pdev->dev, "failed to get gpio %d\n", i);
-
- for (i--; i >= S3C2410_GPE(5); i--)
- gpio_free(i);
-
- return ret;
- }
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "need platform data");
+ return -ENXIO;
}
- if (!pdev->dev.platform_data)
- pdev->dev.platform_data = &s3cmci_def_pdata;
-
- pdata = pdev->dev.platform_data;
+ for (i = 0; i < 6; i++) {
+ pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->bus[i])) {
+ dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+ return PTR_ERR(pdata->bus[i]);
+ }
+ }
if (pdata->no_wprotect)
mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
@@ -1505,14 +1466,14 @@
mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
/* If we get -ENOENT we have no card detect GPIO line */
- ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
if (ret != -ENOENT) {
dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
ret);
return ret;
}
- ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL);
+ ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0);
if (ret != -ENOENT) {
dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
ret);
@@ -1529,7 +1490,7 @@
struct mmc_host *mmc = host->mmc;
int ret;
- host->is2440 = (int) of_device_get_match_data(&pdev->dev);
+ host->is2440 = (long) of_device_get_match_data(&pdev->dev);
ret = mmc_of_parse(mmc);
if (ret)
@@ -1549,7 +1510,6 @@
struct s3cmci_host *host;
struct mmc_host *mmc;
int ret;
- int i;
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
if (!mmc) {
@@ -1593,7 +1553,7 @@
"failed to get io memory region resource.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->mem = request_mem_region(host->mem->start,
@@ -1602,7 +1562,7 @@
if (!host->mem) {
dev_err(&pdev->dev, "failed to request io memory region.\n");
ret = -ENOENT;
- goto probe_free_gpio;
+ goto probe_free_host;
}
host->base = ioremap(host->mem->start, resource_size(host->mem));
@@ -1726,11 +1686,6 @@
probe_free_mem_region:
release_mem_region(host->mem->start, resource_size(host->mem));
- probe_free_gpio:
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
probe_free_host:
mmc_free_host(mmc);
@@ -1756,7 +1711,6 @@
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
- int i;
s3cmci_shutdown(pdev);
@@ -1769,10 +1723,6 @@
free_irq(host->irq, host);
- if (!pdev->dev.of_node)
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
iounmap(host->base);
release_mem_region(host->mem->start, resource_size(host->mem));
@@ -1816,6 +1766,7 @@
static struct platform_driver s3cmci_driver = {
.driver = {
.name = "s3c-sdi",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = s3cmci_dt_match,
},
.id_table = s3cmci_driver_ids,
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 0dc8eaf..a2cdb37 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -23,6 +23,7 @@
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/mmc/host.h>
#include <linux/mmc/pm.h>
@@ -61,7 +62,7 @@
mmc_pm_flag_t pm_caps;
unsigned int flags;
size_t priv_size;
- int (*probe_slot)(struct platform_device *, const char *, const char *);
+ int (*probe_slot)(struct platform_device *, struct acpi_device *);
int (*remove_slot)(struct platform_device *);
int (*free_slot)(struct platform_device *pdev);
int (*setup_host)(struct platform_device *pdev);
@@ -72,7 +73,14 @@
const struct sdhci_acpi_slot *slot;
struct platform_device *pdev;
bool use_runtime_pm;
- unsigned long private[0] ____cacheline_aligned;
+ bool is_intel;
+ bool reset_signal_volt_on_suspend;
+ unsigned long private[] ____cacheline_aligned;
+};
+
+enum {
+ DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP = BIT(0),
+ DMI_QUIRK_SD_NO_WRITE_PROTECT = BIT(1),
};
static inline void *sdhci_acpi_priv(struct sdhci_acpi_host *c)
@@ -234,7 +242,7 @@
static bool sdhci_acpi_byt(void)
{
static const struct x86_cpu_id byt[] = {
- { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT },
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, NULL),
{}
};
@@ -244,7 +252,7 @@
static bool sdhci_acpi_cht(void)
{
static const struct x86_cpu_id cht[] = {
- { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT },
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, NULL),
{}
};
@@ -325,12 +333,10 @@
* wifi card in the expected slot with an ACPI companion node, is used to
* indicate that acpi_device_fix_up_power() should be avoided.
*/
-static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
- const char *uid)
+static inline bool sdhci_acpi_no_fixup_child_power(struct acpi_device *adev)
{
return sdhci_acpi_cht() &&
- !strcmp(hid, "80860F14") &&
- !strcmp(uid, "2") &&
+ acpi_dev_hid_uid_match(adev, "80860F14", "2") &&
sdhci_acpi_cht_pci_wifi(0x14e4, 0x43ec, 0, 28);
}
@@ -345,8 +351,7 @@
return false;
}
-static inline bool sdhci_acpi_no_fixup_child_power(const char *hid,
- const char *uid)
+static inline bool sdhci_acpi_no_fixup_child_power(struct acpi_device *adev)
{
return false;
}
@@ -375,19 +380,18 @@
return ret;
}
-static int intel_probe_slot(struct platform_device *pdev, const char *hid,
- const char *uid)
+static int intel_probe_slot(struct platform_device *pdev, struct acpi_device *adev)
{
struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
struct intel_host *intel_host = sdhci_acpi_priv(c);
struct sdhci_host *host = c->host;
- if (hid && uid && !strcmp(hid, "80860F14") && !strcmp(uid, "1") &&
+ if (acpi_dev_hid_uid_match(adev, "80860F14", "1") &&
sdhci_readl(host, SDHCI_CAPABILITIES) == 0x446cc8b2 &&
sdhci_readl(host, SDHCI_CAPABILITIES_1) == 0x00000807)
host->timeout_clk = 1000; /* 1000 kHz i.e. 1 MHz */
- if (hid && !strcmp(hid, "80865ACA"))
+ if (acpi_dev_hid_uid_match(adev, "80865ACA", NULL))
host->mmc_host_ops.get_cd = bxt_get_cd;
intel_dsm_init(intel_host, &pdev->dev, host->mmc);
@@ -395,6 +399,8 @@
host->mmc_host_ops.start_signal_voltage_switch =
intel_start_signal_voltage_switch;
+ c->is_intel = true;
+
return 0;
}
@@ -473,8 +479,7 @@
return IRQ_HANDLED;
}
-static int qcom_probe_slot(struct platform_device *pdev, const char *hid,
- const char *uid)
+static int qcom_probe_slot(struct platform_device *pdev, struct acpi_device *adev)
{
struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
struct sdhci_host *host = c->host;
@@ -482,7 +487,7 @@
*irq = -EINVAL;
- if (strcmp(hid, "QCOM8051"))
+ if (!acpi_dev_hid_uid_match(adev, "QCOM8051", NULL))
return 0;
*irq = platform_get_irq(pdev, 1);
@@ -501,14 +506,12 @@
struct sdhci_host *host = c->host;
struct acpi_device *adev;
int *irq = sdhci_acpi_priv(c);
- const char *hid;
adev = ACPI_COMPANION(dev);
if (!adev)
return -ENODEV;
- hid = acpi_device_hid(adev);
- if (strcmp(hid, "QCOM8051"))
+ if (!acpi_dev_hid_uid_match(adev, "QCOM8051", NULL))
return 0;
if (*irq < 0)
@@ -544,6 +547,7 @@
unsigned int max_dtr, int host_drv,
int card_drv, int *drv_type)
{
+ *drv_type = MMC_SET_DRIVER_TYPE_A;
return MMC_SET_DRIVER_TYPE_A;
}
@@ -645,7 +649,7 @@
};
static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
- const char *hid, const char *uid)
+ struct acpi_device *adev)
{
struct sdhci_acpi_host *c = platform_get_drvdata(pdev);
struct sdhci_host *host = c->host;
@@ -757,17 +761,53 @@
};
MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
-static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid,
- const char *uid)
+static const struct dmi_system_id sdhci_acpi_quirks[] = {
+ {
+ /*
+ * The Lenovo Miix 320-10ICR has a bug in the _PS0 method of
+ * the SHC1 ACPI device, this bug causes it to reprogram the
+ * wrong LDO (DLDO3) to 1.8V if 1.8V modes are used and the
+ * card is (runtime) suspended + resumed. DLDO3 is used for
+ * the LCD and setting it to 1.8V causes the LCD to go black.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
+ },
+ .driver_data = (void *)DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP,
+ },
+ {
+ /*
+ * The Acer Aspire Switch 10 (SW5-012) microSD slot always
+ * reports the card being write-protected even though microSD
+ * cards do not have a write-protect switch at all.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+ },
+ .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT,
+ },
+ {
+ /*
+ * The Toshiba WT8-B's microSD slot always reports the card being
+ * write-protected.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TOSHIBA ENCORE 2 WT8-B"),
+ },
+ .driver_data = (void *)DMI_QUIRK_SD_NO_WRITE_PROTECT,
+ },
+ {} /* Terminating entry */
+};
+
+static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(struct acpi_device *adev)
{
const struct sdhci_acpi_uid_slot *u;
for (u = sdhci_acpi_uids; u->hid; u++) {
- if (strcmp(u->hid, hid))
- continue;
- if (!u->uid)
- return u->slot;
- if (uid && !strcmp(u->uid, uid))
+ if (acpi_dev_hid_uid_match(adev, u->hid, u->uid))
return u->slot;
}
return NULL;
@@ -778,27 +818,28 @@
struct device *dev = &pdev->dev;
const struct sdhci_acpi_slot *slot;
struct acpi_device *device, *child;
+ const struct dmi_system_id *id;
struct sdhci_acpi_host *c;
struct sdhci_host *host;
struct resource *iomem;
resource_size_t len;
size_t priv_size;
- const char *hid;
- const char *uid;
+ int quirks = 0;
int err;
device = ACPI_COMPANION(dev);
if (!device)
return -ENODEV;
- hid = acpi_device_hid(device);
- uid = acpi_device_uid(device);
+ id = dmi_first_match(sdhci_acpi_quirks);
+ if (id)
+ quirks = (long)id->driver_data;
- slot = sdhci_acpi_get_slot(hid, uid);
+ slot = sdhci_acpi_get_slot(device);
/* Power on the SDHCI controller and its children */
acpi_device_fix_up_power(device);
- if (!sdhci_acpi_no_fixup_child_power(hid, uid)) {
+ if (!sdhci_acpi_no_fixup_child_power(device)) {
list_for_each_entry(child, &device->children, node)
if (child->status.present && child->status.enabled)
acpi_device_fix_up_power(child);
@@ -839,7 +880,7 @@
goto err_free;
}
- host->ioaddr = devm_ioremap_nocache(dev, iomem->start,
+ host->ioaddr = devm_ioremap(dev, iomem->start,
resource_size(iomem));
if (host->ioaddr == NULL) {
err = -ENOMEM;
@@ -848,7 +889,7 @@
if (c->slot) {
if (c->slot->probe_slot) {
- err = c->slot->probe_slot(pdev, hid, uid);
+ err = c->slot->probe_slot(pdev, device);
if (err)
goto err_free;
}
@@ -872,13 +913,19 @@
if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);
- err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL);
+ err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0);
if (err) {
if (err == -EPROBE_DEFER)
goto err_free;
dev_warn(dev, "failed to setup card detect gpio\n");
c->use_runtime_pm = false;
}
+
+ if (quirks & DMI_QUIRK_RESET_SD_SIGNAL_VOLT_ON_SUSP)
+ c->reset_signal_volt_on_suspend = true;
+
+ if (quirks & DMI_QUIRK_SD_NO_WRITE_PROTECT)
+ host->mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
}
err = sdhci_setup_host(host);
@@ -943,17 +990,39 @@
return 0;
}
+static void __maybe_unused sdhci_acpi_reset_signal_voltage_if_needed(
+ struct device *dev)
+{
+ struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+ struct sdhci_host *host = c->host;
+
+ if (c->is_intel && c->reset_signal_volt_on_suspend &&
+ host->mmc->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_330) {
+ struct intel_host *intel_host = sdhci_acpi_priv(c);
+ unsigned int fn = INTEL_DSM_V33_SWITCH;
+ u32 result = 0;
+
+ intel_dsm(intel_host, dev, fn, &result);
+ }
+}
+
#ifdef CONFIG_PM_SLEEP
static int sdhci_acpi_suspend(struct device *dev)
{
struct sdhci_acpi_host *c = dev_get_drvdata(dev);
struct sdhci_host *host = c->host;
+ int ret;
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
- return sdhci_suspend_host(host);
+ ret = sdhci_suspend_host(host);
+ if (ret)
+ return ret;
+
+ sdhci_acpi_reset_signal_voltage_if_needed(dev);
+ return 0;
}
static int sdhci_acpi_resume(struct device *dev)
@@ -973,11 +1042,17 @@
{
struct sdhci_acpi_host *c = dev_get_drvdata(dev);
struct sdhci_host *host = c->host;
+ int ret;
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
- return sdhci_runtime_suspend_host(host);
+ ret = sdhci_runtime_suspend_host(host);
+ if (ret)
+ return ret;
+
+ sdhci_acpi_reset_signal_voltage_if_needed(dev);
+ return 0;
}
static int sdhci_acpi_runtime_resume(struct device *dev)
@@ -1000,6 +1075,7 @@
static struct platform_driver sdhci_acpi_driver = {
.driver = {
.name = "sdhci-acpi",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.acpi_match_table = sdhci_acpi_ids,
.pm = &sdhci_acpi_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index a6c2bd2..4d4aac8 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -324,6 +324,7 @@
static struct platform_driver sdhci_bcm_kona_driver = {
.driver = {
.name = "sdhci-kona",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_pltfm_pmops,
.of_match_table = sdhci_bcm_kona_of_match,
},
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index 73bb440..f24623a 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -9,66 +9,298 @@
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
#include "sdhci-pltfm.h"
+#include "cqhci.h"
-static const struct sdhci_ops sdhci_brcmstb_ops = {
+#define SDHCI_VENDOR 0x78
+#define SDHCI_VENDOR_ENHANCED_STRB 0x1
+
+#define BRCMSTB_PRIV_FLAGS_NO_64BIT BIT(0)
+#define BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT BIT(1)
+
+#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200
+
+struct sdhci_brcmstb_priv {
+ void __iomem *cfg_regs;
+ bool has_cqe;
+};
+
+struct brcmstb_match_priv {
+ void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios);
+ struct sdhci_ops *ops;
+ unsigned int flags;
+};
+
+static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ u32 reg;
+
+ dev_dbg(mmc_dev(mmc), "%s(): Setting HS400-Enhanced-Strobe mode\n",
+ __func__);
+ reg = readl(host->ioaddr + SDHCI_VENDOR);
+ if (ios->enhanced_strobe)
+ reg |= SDHCI_VENDOR_ENHANCED_STRB;
+ else
+ reg &= ~SDHCI_VENDOR_ENHANCED_STRB;
+ writel(reg, host->ioaddr + SDHCI_VENDOR);
+}
+
+static void sdhci_brcmstb_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ u16 clk;
+
+ host->mmc->actual_clock = 0;
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ sdhci_enable_clk(host, clk);
+}
+
+static void sdhci_brcmstb_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u16 ctrl_2;
+
+ dev_dbg(mmc_dev(host->mmc), "%s: Setting UHS signaling for %d timing\n",
+ __func__, timing);
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if ((timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR104))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if (timing == MMC_TIMING_SD_HS ||
+ timing == MMC_TIMING_MMC_HS ||
+ timing == MMC_TIMING_UHS_SDR25)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static void sdhci_brcmstb_dumpregs(struct mmc_host *mmc)
+{
+ sdhci_dumpregs(mmc_priv(mmc));
+}
+
+static void sdhci_brcmstb_cqe_enable(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 reg;
+
+ reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ while (reg & SDHCI_DATA_AVAILABLE) {
+ sdhci_readl(host, SDHCI_BUFFER);
+ reg = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ }
+
+ sdhci_cqe_enable(mmc);
+}
+
+static const struct cqhci_host_ops sdhci_brcmstb_cqhci_ops = {
+ .enable = sdhci_brcmstb_cqe_enable,
+ .disable = sdhci_cqe_disable,
+ .dumpregs = sdhci_brcmstb_dumpregs,
+};
+
+static struct sdhci_ops sdhci_brcmstb_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
-static const struct sdhci_pltfm_data sdhci_brcmstb_pdata = {
+static struct sdhci_ops sdhci_brcmstb_ops_7216 = {
+ .set_clock = sdhci_brcmstb_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling,
+};
+
+static struct brcmstb_match_priv match_priv_7425 = {
+ .flags = BRCMSTB_PRIV_FLAGS_NO_64BIT |
+ BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT,
.ops = &sdhci_brcmstb_ops,
};
+static struct brcmstb_match_priv match_priv_7445 = {
+ .flags = BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT,
+ .ops = &sdhci_brcmstb_ops,
+};
+
+static const struct brcmstb_match_priv match_priv_7216 = {
+ .hs400es = sdhci_brcmstb_hs400es,
+ .ops = &sdhci_brcmstb_ops_7216,
+};
+
+static const struct of_device_id sdhci_brcm_of_match[] = {
+ { .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 },
+ { .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 },
+ { .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 },
+ {},
+};
+
+static u32 sdhci_brcmstb_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+ int cmd_error = 0;
+ int data_error = 0;
+
+ if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+ return intmask;
+
+ cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+ return 0;
+}
+
+static int sdhci_brcmstb_add_host(struct sdhci_host *host,
+ struct sdhci_brcmstb_priv *priv)
+{
+ struct cqhci_host *cq_host;
+ bool dma64;
+ int ret;
+
+ if (!priv->has_cqe)
+ return sdhci_add_host(host);
+
+ dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n");
+ host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+ ret = sdhci_setup_host(host);
+ if (ret)
+ return ret;
+
+ cq_host = devm_kzalloc(mmc_dev(host->mmc),
+ sizeof(*cq_host), GFP_KERNEL);
+ if (!cq_host) {
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ cq_host->mmio = host->ioaddr + SDHCI_ARASAN_CQE_BASE_ADDR;
+ cq_host->ops = &sdhci_brcmstb_cqhci_ops;
+
+ dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+ if (dma64) {
+ dev_dbg(mmc_dev(host->mmc), "Using 64 bit DMA\n");
+ cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ }
+
+ ret = cqhci_init(cq_host, host->mmc, dma64);
+ if (ret)
+ goto cleanup;
+
+ ret = __sdhci_add_host(host);
+ if (ret)
+ goto cleanup;
+
+ return 0;
+
+cleanup:
+ sdhci_cleanup_host(host);
+ return ret;
+}
+
static int sdhci_brcmstb_probe(struct platform_device *pdev)
{
- struct sdhci_host *host;
+ const struct brcmstb_match_priv *match_priv;
+ struct sdhci_pltfm_data brcmstb_pdata;
struct sdhci_pltfm_host *pltfm_host;
+ const struct of_device_id *match;
+ struct sdhci_brcmstb_priv *priv;
+ struct sdhci_host *host;
+ struct resource *iomem;
+ bool has_cqe = false;
struct clk *clk;
int res;
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "Clock not found in Device Tree\n");
- clk = NULL;
- }
+ match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node);
+ match_priv = match->data;
+
+ dev_dbg(&pdev->dev, "Probe found match for %s\n", match->compatible);
+
+ clk = devm_clk_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+ "Failed to get clock from Device Tree\n");
+
res = clk_prepare_enable(clk);
if (res)
return res;
- host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0);
+ memset(&brcmstb_pdata, 0, sizeof(brcmstb_pdata));
+ if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
+ has_cqe = true;
+ match_priv->ops->irq = sdhci_brcmstb_cqhci_irq;
+ }
+ brcmstb_pdata.ops = match_priv->ops;
+ host = sdhci_pltfm_init(pdev, &brcmstb_pdata,
+ sizeof(struct sdhci_brcmstb_priv));
if (IS_ERR(host)) {
res = PTR_ERR(host);
goto err_clk;
}
+ pltfm_host = sdhci_priv(host);
+ priv = sdhci_pltfm_priv(pltfm_host);
+ priv->has_cqe = has_cqe;
+
+ /* Map in the non-standard CFG registers */
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(priv->cfg_regs)) {
+ res = PTR_ERR(priv->cfg_regs);
+ goto err;
+ }
+
sdhci_get_of_property(pdev);
res = mmc_of_parse(host->mmc);
if (res)
goto err;
/*
+ * If the chip has enhanced strobe and it's enabled, add
+ * callback
+ */
+ if (match_priv->hs400es &&
+ (host->mmc->caps2 & MMC_CAP2_HS400_ES))
+ host->mmc_host_ops.hs400_enhanced_strobe = match_priv->hs400es;
+
+ /*
* Supply the existing CAPS, but clear the UHS modes. This
* will allow these modes to be specified by device tree
* properties through mmc_of_parse().
*/
host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
- if (of_device_is_compatible(pdev->dev.of_node, "brcm,bcm7425-sdhci"))
+ if (match_priv->flags & BRCMSTB_PRIV_FLAGS_NO_64BIT)
host->caps &= ~SDHCI_CAN_64BIT;
host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
- SDHCI_SUPPORT_DDR50);
- host->quirks |= SDHCI_QUIRK_MISSING_CAPS |
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ SDHCI_SUPPORT_DDR50);
+ host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
- res = sdhci_add_host(host);
+ if (match_priv->flags & BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT)
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ res = sdhci_brcmstb_add_host(host, priv);
if (res)
goto err;
- pltfm_host = sdhci_priv(host);
pltfm_host->clk = clk;
return res;
@@ -79,21 +311,23 @@
return res;
}
-static const struct of_device_id sdhci_brcm_of_match[] = {
- { .compatible = "brcm,bcm7425-sdhci" },
- { .compatible = "brcm,bcm7445-sdhci" },
- {},
-};
+static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
+{
+ sdhci_pltfm_suspend(&pdev->dev);
+}
+
MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
static struct platform_driver sdhci_brcmstb_driver = {
.driver = {
.name = "sdhci-brcmstb",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_pltfm_pmops,
.of_match_table = of_match_ptr(sdhci_brcm_of_match),
},
.probe = sdhci_brcmstb_probe,
.remove = sdhci_pltfm_unregister,
+ .shutdown = sdhci_brcmstb_shutdown,
};
module_platform_driver(sdhci_brcmstb_driver);
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index 0c24894..6f2de54 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -68,7 +68,7 @@
void __iomem *hrs_addr;
bool enhanced_strobe;
unsigned int nr_phy_params;
- struct sdhci_cdns_phy_param phy_params[0];
+ struct sdhci_cdns_phy_param phy_params[];
};
struct sdhci_cdns_phy_cfg {
@@ -97,6 +97,11 @@
u32 tmp;
int ret;
+ ret = readl_poll_timeout(reg, tmp, !(tmp & SDHCI_CDNS_HRS04_ACK),
+ 0, 10);
+ if (ret)
+ return ret;
+
tmp = FIELD_PREP(SDHCI_CDNS_HRS04_WDATA, data) |
FIELD_PREP(SDHCI_CDNS_HRS04_ADDR, addr);
writel(tmp, reg);
@@ -111,7 +116,10 @@
tmp &= ~SDHCI_CDNS_HRS04_WR;
writel(tmp, reg);
- return 0;
+ ret = readl_poll_timeout(reg, tmp, !(tmp & SDHCI_CDNS_HRS04_ACK),
+ 0, 10);
+
+ return ret;
}
static unsigned int sdhci_cdns_phy_param_count(struct device_node *np)
@@ -159,7 +167,7 @@
return 0;
}
-static inline void *sdhci_cdns_priv(struct sdhci_host *host)
+static void *sdhci_cdns_priv(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -455,6 +463,7 @@
static struct platform_driver sdhci_cdns_driver = {
.driver = {
.name = "sdhci-cdns",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_cdns_pm_ops,
.of_match_table = sdhci_cdns_match,
},
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index 811eab1..2a29c7a 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -98,6 +98,7 @@
static struct platform_driver sdhci_cns3xxx_driver = {
.driver = {
.name = "sdhci-cns3xxx",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_cns3xxx_probe,
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index fe9da31..5e5bf82 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -105,6 +105,7 @@
static struct platform_driver sdhci_dove_driver = {
.driver = {
.name = "sdhci-dove",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_pltfm_pmops,
.of_match_table = sdhci_dove_of_match_table,
},
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 7716762..a4bd85b 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -8,7 +8,9 @@
* Author: Wolfram Sang <kernel@pengutronix.de>
*/
+#include <linux/bitfield.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
@@ -36,6 +38,16 @@
#define ESDHC_VENDOR_SPEC_SDIO_QUIRK (1 << 1)
#define ESDHC_VENDOR_SPEC_VSELECT (1 << 1)
#define ESDHC_VENDOR_SPEC_FRC_SDCLK_ON (1 << 8)
+#define ESDHC_DEBUG_SEL_AND_STATUS_REG 0xc2
+#define ESDHC_DEBUG_SEL_REG 0xc3
+#define ESDHC_DEBUG_SEL_MASK 0xf
+#define ESDHC_DEBUG_SEL_CMD_STATE 1
+#define ESDHC_DEBUG_SEL_DATA_STATE 2
+#define ESDHC_DEBUG_SEL_TRANS_STATE 3
+#define ESDHC_DEBUG_SEL_DMA_STATE 4
+#define ESDHC_DEBUG_SEL_ADMA_STATE 5
+#define ESDHC_DEBUG_SEL_FIFO_STATE 6
+#define ESDHC_DEBUG_SEL_ASYNC_FIFO_STATE 7
#define ESDHC_WTMK_LVL 0x44
#define ESDHC_WTMK_DEFAULT_VAL 0x10401040
#define ESDHC_WTMK_LVL_RD_WML_MASK 0x000000FF
@@ -73,6 +85,7 @@
#define ESDHC_STROBE_DLL_CTRL 0x70
#define ESDHC_STROBE_DLL_CTRL_ENABLE (1 << 0)
#define ESDHC_STROBE_DLL_CTRL_RESET (1 << 1)
+#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT 0x7
#define ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT 3
#define ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT (4 << 20)
@@ -88,6 +101,7 @@
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP_DEFAULT 0x1
#define ESDHC_TUNING_START_TAP_MASK 0x7f
+#define ESDHC_TUNING_CMD_CRC_CHECK_DISABLE (1 << 7)
#define ESDHC_TUNING_STEP_MASK 0x00070000
#define ESDHC_TUNING_STEP_SHIFT 16
@@ -160,6 +174,22 @@
#define ESDHC_FLAG_CQHCI BIT(12)
/* need request pmqos during low power */
#define ESDHC_FLAG_PMQOS BIT(13)
+/* The IP state got lost in low power mode */
+#define ESDHC_FLAG_STATE_LOST_IN_LPMODE BIT(14)
+/* The IP lost clock rate in PM_RUNTIME */
+#define ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME BIT(15)
+/*
+ * The IP do not support the ACMD23 feature completely when use ADMA mode.
+ * In ADMA mode, it only use the 16 bit block count of the register 0x4
+ * (BLOCK_ATT) as the CMD23's argument for ACMD23 mode, which means it will
+ * ignore the upper 16 bit of the CMD23's argument. This will block the reliable
+ * write operation in RPMB, because RPMB reliable write need to set the bit31
+ * of the CMD23's argument.
+ * imx6qpdl/imx6sx/imx6sl/imx7d has this limitation only for ADMA mode, SDMA
+ * do not has this limitation. so when these SoC use ADMA mode, it need to
+ * disable the ACMD23 feature.
+ */
+#define ESDHC_FLAG_BROKEN_AUTO_CMD23 BIT(16)
struct esdhc_soc_data {
u32 flags;
@@ -182,49 +212,71 @@
};
static const struct esdhc_soc_data usdhc_imx6q_data = {
- .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING,
+ .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING
+ | ESDHC_FLAG_BROKEN_AUTO_CMD23,
};
static const struct esdhc_soc_data usdhc_imx6sl_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536
- | ESDHC_FLAG_HS200,
+ | ESDHC_FLAG_HS200
+ | ESDHC_FLAG_BROKEN_AUTO_CMD23,
+};
+
+static const struct esdhc_soc_data usdhc_imx6sll_data = {
+ .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+ | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+ | ESDHC_FLAG_HS400
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE,
};
static const struct esdhc_soc_data usdhc_imx6sx_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
- | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200,
+ | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE
+ | ESDHC_FLAG_BROKEN_AUTO_CMD23,
};
static const struct esdhc_soc_data usdhc_imx6ull_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
- | ESDHC_FLAG_ERR010450,
+ | ESDHC_FLAG_ERR010450
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE,
};
static const struct esdhc_soc_data usdhc_imx7d_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
- | ESDHC_FLAG_HS400,
+ | ESDHC_FLAG_HS400
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE
+ | ESDHC_FLAG_BROKEN_AUTO_CMD23,
};
static struct esdhc_soc_data usdhc_imx7ulp_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
- | ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400,
+ | ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE,
};
static struct esdhc_soc_data usdhc_imx8qxp_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
- | ESDHC_FLAG_CQHCI,
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE
+ | ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,
+};
+
+static struct esdhc_soc_data usdhc_imx8mm_data = {
+ .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+ | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+ | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
+ | ESDHC_FLAG_STATE_LOST_IN_LPMODE,
};
struct pltfm_imx_data {
u32 scratchpad;
struct pinctrl *pinctrl;
- struct pinctrl_state *pins_default;
struct pinctrl_state *pins_100mhz;
struct pinctrl_state *pins_200mhz;
const struct esdhc_soc_data *socdata;
@@ -265,11 +317,13 @@
{ .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, },
{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, },
{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
+ { .compatible = "fsl,imx6sll-usdhc", .data = &usdhc_imx6sll_data, },
{ .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
{ .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, },
{ .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, },
{ .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, },
{ .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, },
+ { .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids);
@@ -302,6 +356,45 @@
writel(((readl(base) & ~(mask << shift)) | (val << shift)), base);
}
+#define DRIVER_NAME "sdhci-esdhc-imx"
+#define ESDHC_IMX_DUMP(f, x...) \
+ pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
+static void esdhc_dump_debug_regs(struct sdhci_host *host)
+{
+ int i;
+ char *debug_status[7] = {
+ "cmd debug status",
+ "data debug status",
+ "trans debug status",
+ "dma debug status",
+ "adma debug status",
+ "fifo debug status",
+ "async fifo debug status"
+ };
+
+ ESDHC_IMX_DUMP("========= ESDHC IMX DEBUG STATUS DUMP =========\n");
+ for (i = 0; i < 7; i++) {
+ esdhc_clrset_le(host, ESDHC_DEBUG_SEL_MASK,
+ ESDHC_DEBUG_SEL_CMD_STATE + i, ESDHC_DEBUG_SEL_REG);
+ ESDHC_IMX_DUMP("%s: 0x%04x\n", debug_status[i],
+ readw(host->ioaddr + ESDHC_DEBUG_SEL_AND_STATUS_REG));
+ }
+
+ esdhc_clrset_le(host, ESDHC_DEBUG_SEL_MASK, 0, ESDHC_DEBUG_SEL_REG);
+
+}
+
+static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host)
+{
+ u32 present_state;
+ int ret;
+
+ ret = readl_poll_timeout(host->ioaddr + ESDHC_PRSSTAT, present_state,
+ (present_state & ESDHC_CLOCK_GATE_OFF), 2, 100);
+ if (ret == -ETIMEDOUT)
+ dev_warn(mmc_dev(host->mmc), "%s: card clock still not gate off in 100us!.\n", __func__);
+}
+
static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -345,7 +438,8 @@
val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
| SDHCI_SUPPORT_SDR50
| SDHCI_USE_SDR50_TUNING
- | (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
+ | FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
+ SDHCI_TUNING_MODE_3);
if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
val |= SDHCI_SUPPORT_HS400;
@@ -363,9 +457,9 @@
if (unlikely(reg == SDHCI_MAX_CURRENT) && esdhc_is_usdhc(imx_data)) {
val = 0;
- val |= 0xFF << SDHCI_MAX_CURRENT_330_SHIFT;
- val |= 0xFF << SDHCI_MAX_CURRENT_300_SHIFT;
- val |= 0xFF << SDHCI_MAX_CURRENT_180_SHIFT;
+ val |= FIELD_PREP(SDHCI_MAX_CURRENT_330_MASK, 0xFF);
+ val |= FIELD_PREP(SDHCI_MAX_CURRENT_300_MASK, 0xFF);
+ val |= FIELD_PREP(SDHCI_MAX_CURRENT_180_MASK, 0xFF);
}
if (unlikely(reg == SDHCI_INT_STATUS)) {
@@ -515,6 +609,8 @@
else
new_val &= ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON;
writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
+ if (!(new_val & ESDHC_VENDOR_SPEC_FRC_SDCLK_ON))
+ esdhc_wait_for_card_clock_gate_off(host);
return;
case SDHCI_HOST_CONTROL2:
new_val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
@@ -583,10 +679,24 @@
* For DMA access restore the levels to default value.
*/
m = readl(host->ioaddr + ESDHC_WTMK_LVL);
- if (val & SDHCI_TRNS_DMA)
+ if (val & SDHCI_TRNS_DMA) {
wml = ESDHC_WTMK_LVL_WML_VAL_DEF;
- else
+ } else {
+ u8 ctrl;
wml = ESDHC_WTMK_LVL_WML_VAL_MAX;
+
+ /*
+ * Since already disable DMA mode, so also need
+ * to clear the DMASEL. Otherwise, for standard
+ * tuning, when send tuning command, usdhc will
+ * still prefetch the ADMA script from wrong
+ * DMA address, then we will see IOMMU report
+ * some error which show lack of TLB mapping.
+ */
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
m &= ~(ESDHC_WTMK_LVL_RD_WML_MASK |
ESDHC_WTMK_LVL_WR_WML_MASK);
m |= (wml << ESDHC_WTMK_LVL_RD_WML_SHIFT) |
@@ -743,12 +853,14 @@
int ddr_pre_div = imx_data->is_ddr ? 2 : 1;
int pre_div = 1;
int div = 1;
+ int ret;
u32 temp, val;
if (esdhc_is_usdhc(imx_data)) {
val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
host->ioaddr + ESDHC_VENDOR_SPEC);
+ esdhc_wait_for_card_clock_gate_off(host);
}
if (clock == 0) {
@@ -803,13 +915,18 @@
| (pre_div << ESDHC_PREDIV_SHIFT));
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ /* need to wait the bit 3 of the PRSSTAT to be set, make sure card clock is stable */
+ ret = readl_poll_timeout(host->ioaddr + ESDHC_PRSSTAT, temp,
+ (temp & ESDHC_CLOCK_STABLE), 2, 100);
+ if (ret == -ETIMEDOUT)
+ dev_warn(mmc_dev(host->mmc), "card clock still not stable in 100us!.\n");
+
if (esdhc_is_usdhc(imx_data)) {
val = readl(host->ioaddr + ESDHC_VENDOR_SPEC);
writel(val | ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
host->ioaddr + ESDHC_VENDOR_SPEC);
}
- mdelay(1);
}
static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
@@ -868,10 +985,20 @@
static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
{
u32 reg;
+ u8 sw_rst;
+ int ret;
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
+ /* IC suggest to reset USDHC before every tuning command */
+ esdhc_clrset_le(host, 0xff, SDHCI_RESET_ALL, SDHCI_SOFTWARE_RESET);
+ ret = readb_poll_timeout(host->ioaddr + SDHCI_SOFTWARE_RESET, sw_rst,
+ !(sw_rst & SDHCI_RESET_ALL), 10, 100);
+ if (ret == -ETIMEDOUT)
+ dev_warn(mmc_dev(host->mmc),
+ "warning! RESET_ALL never complete before sending tuning command\n");
+
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
@@ -951,7 +1078,6 @@
dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs);
if (IS_ERR(imx_data->pinctrl) ||
- IS_ERR(imx_data->pins_default) ||
IS_ERR(imx_data->pins_100mhz) ||
IS_ERR(imx_data->pins_200mhz))
return -EINVAL;
@@ -968,7 +1094,7 @@
break;
default:
/* back to default state for other legacy timing */
- pinctrl = imx_data->pins_default;
+ return pinctrl_select_default_state(mmc_dev(host->mmc));
}
return pinctrl_select_state(imx_data->pinctrl, pinctrl);
@@ -985,12 +1111,17 @@
*/
static void esdhc_set_strobe_dll(struct sdhci_host *host)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+ u32 strobe_delay;
u32 v;
+ int ret;
/* disable clock before enabling strobe dll */
writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) &
~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
host->ioaddr + ESDHC_VENDOR_SPEC);
+ esdhc_wait_for_card_clock_gate_off(host);
/* force a reset on strobe dll */
writel(ESDHC_STROBE_DLL_CTRL_RESET,
@@ -1002,19 +1133,21 @@
* enable strobe dll ctrl and adjust the delay target
* for the uSDHC loopback read clock
*/
+ if (imx_data->boarddata.strobe_dll_delay_target)
+ strobe_delay = imx_data->boarddata.strobe_dll_delay_target;
+ else
+ strobe_delay = ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT;
v = ESDHC_STROBE_DLL_CTRL_ENABLE |
ESDHC_STROBE_DLL_CTRL_SLV_UPDATE_INT_DEFAULT |
- (7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
+ (strobe_delay << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT);
writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL);
- /* wait 5us to make sure strobe dll status register stable */
- udelay(5);
- v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS);
- if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK))
+
+ /* wait max 50us to get the REF/SLV lock */
+ ret = readl_poll_timeout(host->ioaddr + ESDHC_STROBE_DLL_STATUS, v,
+ ((v & ESDHC_STROBE_DLL_STS_REF_LOCK) && (v & ESDHC_STROBE_DLL_STS_SLV_LOCK)), 1, 50);
+ if (ret == -ETIMEDOUT)
dev_warn(mmc_dev(host->mmc),
- "warning! HS400 strobe DLL status REF not lock!\n");
- if (!(v & ESDHC_STROBE_DLL_STS_SLV_LOCK))
- dev_warn(mmc_dev(host->mmc),
- "warning! HS400 strobe DLL status SLV not lock!\n");
+ "warning! HS400 strobe DLL status REF/SLV not lock in 50us, STROBE DLL status is %x!\n", v);
}
static void esdhc_reset_tuning(struct sdhci_host *host)
@@ -1022,6 +1155,7 @@
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
u32 ctrl;
+ int ret;
/* Reset the tuning circuit */
if (esdhc_is_usdhc(imx_data)) {
@@ -1034,7 +1168,22 @@
} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+ ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE;
writel(ctrl, host->ioaddr + SDHCI_AUTO_CMD_STATUS);
+ /* Make sure ESDHC_MIX_CTRL_EXE_TUNE cleared */
+ ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS,
+ ctrl, !(ctrl & ESDHC_MIX_CTRL_EXE_TUNE), 1, 50);
+ if (ret == -ETIMEDOUT)
+ dev_warn(mmc_dev(host->mmc),
+ "Warning! clear execute tuning bit failed\n");
+ /*
+ * SDHCI_INT_DATA_AVAIL is W1C bit, set this bit will clear the
+ * usdhc IP internal logic flag execute_tuning_with_clr_buf, which
+ * will finally make sure the normal data transfer logic correct.
+ */
+ ctrl = readl(host->ioaddr + SDHCI_INT_STATUS);
+ ctrl |= SDHCI_INT_DATA_AVAIL;
+ writel(ctrl, host->ioaddr + SDHCI_INT_STATUS);
}
}
}
@@ -1150,6 +1299,7 @@
.set_uhs_signaling = esdhc_set_uhs_signaling,
.reset = esdhc_reset,
.irq = esdhc_cqhci_irq,
+ .dump_vendor_regs = esdhc_dump_debug_regs,
};
static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
@@ -1164,6 +1314,7 @@
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+ struct cqhci_host *cq_host = host->mmc->cqe_private;
int tmp;
if (esdhc_is_usdhc(imx_data)) {
@@ -1229,6 +1380,18 @@
tmp |= imx_data->boarddata.tuning_step
<< ESDHC_TUNING_STEP_SHIFT;
}
+
+ /* Disable the CMD CRC check for tuning, if not, need to
+ * add some delay after every tuning command, because
+ * hardware standard tuning logic will directly go to next
+ * step once it detect the CMD CRC error, will not wait for
+ * the card side to finally send out the tuning data, trigger
+ * the buffer read ready interrupt immediately. If usdhc send
+ * the next tuning command some eMMC card will stuck, can't
+ * response, block the tuning procedure or the first command
+ * after the whole tuning procedure always can't get any response.
+ */
+ tmp |= ESDHC_TUNING_CMD_CRC_CHECK_DISABLE;
writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
} else if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
/*
@@ -1240,6 +1403,21 @@
tmp &= ~ESDHC_STD_TUNING_EN;
writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
}
+
+ /*
+ * On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
+ * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
+ * the 1st linux configure power/clock for the 2nd Linux.
+ *
+ * When the 2nd Linux is booting into rootfs stage, we let the 1st Linux
+ * to destroy the 2nd linux, then restart the 2nd linux, we met SDHCI dump.
+ * After we clear the pending interrupt and halt CQCTL, issue gone.
+ */
+ if (cq_host) {
+ tmp = cqhci_readl(cq_host, CQHCI_IS);
+ cqhci_writel(cq_host, tmp, CQHCI_IS);
+ cqhci_writel(cq_host, CQHCI_HALT, CQHCI_CTL);
+ }
}
}
@@ -1330,6 +1508,8 @@
of_property_read_u32(np, "fsl,tuning-start-tap",
&boarddata->tuning_start_tap);
+ of_property_read_u32(np, "fsl,strobe-dll-delay-target",
+ &boarddata->strobe_dll_delay_target);
if (of_find_property(np, "no-1-8-v", NULL))
host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
@@ -1338,7 +1518,7 @@
mmc_of_parse_voltage(np, &host->ocr_mask);
- if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) {
+ if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pinctrl)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
@@ -1383,7 +1563,7 @@
if (boarddata->wp_type == ESDHC_WP_GPIO) {
host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
- err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL);
+ err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request write-protect gpio!\n");
@@ -1394,13 +1574,13 @@
/* card_detect */
switch (boarddata->cd_type) {
case ESDHC_CD_GPIO:
- err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
+ err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0);
if (err) {
dev_err(mmc_dev(host->mmc),
"failed to request card-detect gpio!\n");
return err;
}
- /* fall through */
+ fallthrough;
case ESDHC_CD_CONTROLLER:
/* we have a working card_detect back */
@@ -1454,8 +1634,7 @@
pdev->id_entry->driver_data;
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
- pm_qos_add_request(&imx_data->pm_qos_req,
- PM_QOS_CPU_DMA_LATENCY, 0);
+ cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0);
imx_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(imx_data->clk_ipg)) {
@@ -1488,19 +1667,16 @@
goto disable_ipg_clk;
imx_data->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (IS_ERR(imx_data->pinctrl)) {
- err = PTR_ERR(imx_data->pinctrl);
- goto disable_ahb_clk;
- }
-
- imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(imx_data->pins_default))
- dev_warn(mmc_dev(host->mmc), "could not get default state\n");
+ if (IS_ERR(imx_data->pinctrl))
+ dev_warn(mmc_dev(host->mmc), "could not get pinctrl\n");
if (esdhc_is_usdhc(imx_data)) {
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
+
+ /* GPIO CD can be set as a wakeup source */
+ host->mmc->caps |= MMC_CAP_CD_WAKE;
+
if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
@@ -1526,6 +1702,9 @@
if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
+ if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
+ host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;
+
if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
host->mmc->caps2 |= MMC_CAP2_HS400_ES;
host->mmc_host_ops.hs400_enhanced_strobe =
@@ -1555,8 +1734,6 @@
if (err)
goto disable_ahb_clk;
- host->tuning_delay = 1;
-
sdhci_esdhc_imx_hwinit(host);
err = sdhci_add_host(host);
@@ -1579,7 +1756,7 @@
clk_disable_unprepare(imx_data->clk_per);
free_sdhci:
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
- pm_qos_remove_request(&imx_data->pm_qos_req);
+ cpu_latency_qos_remove_request(&imx_data->pm_qos_req);
sdhci_pltfm_free(pdev);
return err;
}
@@ -1603,7 +1780,7 @@
clk_disable_unprepare(imx_data->clk_ahb);
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
- pm_qos_remove_request(&imx_data->pm_qos_req);
+ cpu_latency_qos_remove_request(&imx_data->pm_qos_req);
sdhci_pltfm_free(pdev);
@@ -1614,6 +1791,8 @@
static int sdhci_esdhc_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
int ret;
if (host->mmc->caps2 & MMC_CAP2_CQE) {
@@ -1622,10 +1801,26 @@
return ret;
}
+ if ((imx_data->socdata->flags & ESDHC_FLAG_STATE_LOST_IN_LPMODE) &&
+ (host->tuning_mode != SDHCI_TUNING_MODE_1)) {
+ mmc_retune_timer_stop(host->mmc);
+ mmc_retune_needed(host->mmc);
+ }
+
if (host->tuning_mode != SDHCI_TUNING_MODE_3)
mmc_retune_needed(host->mmc);
- return sdhci_suspend_host(host);
+ ret = sdhci_suspend_host(host);
+ if (ret)
+ return ret;
+
+ ret = pinctrl_pm_select_sleep_state(dev);
+ if (ret)
+ return ret;
+
+ ret = mmc_gpio_set_cd_wake(host->mmc, true);
+
+ return ret;
}
static int sdhci_esdhc_resume(struct device *dev)
@@ -1633,6 +1828,10 @@
struct sdhci_host *host = dev_get_drvdata(dev);
int ret;
+ ret = pinctrl_pm_select_default_state(dev);
+ if (ret)
+ return ret;
+
/* re-initialize hw state in case it's lost in low power mode */
sdhci_esdhc_imx_hwinit(host);
@@ -1643,6 +1842,9 @@
if (host->mmc->caps2 & MMC_CAP2_CQE)
ret = cqhci_resume(host->mmc);
+ if (!ret)
+ ret = mmc_gpio_set_cd_wake(host->mmc, false);
+
return ret;
}
#endif
@@ -1675,7 +1877,7 @@
clk_disable_unprepare(imx_data->clk_ahb);
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
- pm_qos_remove_request(&imx_data->pm_qos_req);
+ cpu_latency_qos_remove_request(&imx_data->pm_qos_req);
return ret;
}
@@ -1688,8 +1890,10 @@
int err;
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
- pm_qos_add_request(&imx_data->pm_qos_req,
- PM_QOS_CPU_DMA_LATENCY, 0);
+ cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0);
+
+ if (imx_data->socdata->flags & ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME)
+ clk_set_rate(imx_data->clk_per, pltfm_host->clock);
err = clk_prepare_enable(imx_data->clk_ahb);
if (err)
@@ -1722,7 +1926,7 @@
clk_disable_unprepare(imx_data->clk_ahb);
remove_pm_qos_request:
if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
- pm_qos_remove_request(&imx_data->pm_qos_req);
+ cpu_latency_qos_remove_request(&imx_data->pm_qos_req);
return err;
}
#endif
@@ -1736,6 +1940,7 @@
static struct platform_driver sdhci_esdhc_imx_driver = {
.driver = {
.name = "sdhci-esdhc-imx",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = imx_esdhc_dt_ids,
.pm = &sdhci_esdhc_pmops,
},
diff --git a/drivers/mmc/host/sdhci-esdhc-mcf.c b/drivers/mmc/host/sdhci-esdhc-mcf.c
new file mode 100644
index 0000000..ca7a169
--- /dev/null
+++ b/drivers/mmc/host/sdhci-esdhc-mcf.c
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Freescale eSDHC ColdFire family controller driver, platform bus.
+ *
+ * Copyright (c) 2020 Timesys Corporation
+ * Author: Angelo Dureghello <angelo.dureghello@timesys.it>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_data/mmc-esdhc-mcf.h>
+#include <linux/mmc/mmc.h>
+#include "sdhci-pltfm.h"
+#include "sdhci-esdhc.h"
+
+#define ESDHC_PROCTL_D3CD 0x08
+#define ESDHC_SYS_CTRL_DTOCV_MASK 0x0f
+#define ESDHC_DEFAULT_HOST_CONTROL 0x28
+
+/*
+ * Freescale eSDHC has DMA ERR flag at bit 28, not as std spec says, bit 25.
+ */
+#define ESDHC_INT_VENDOR_SPEC_DMA_ERR BIT(28)
+
+struct pltfm_mcf_data {
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
+ int aside;
+ int current_bus_width;
+};
+
+static inline void esdhc_mcf_buffer_swap32(u32 *buf, int len)
+{
+ int i;
+ u32 temp;
+
+ len = (len + 3) >> 2;
+
+ for (i = 0; i < len; i++) {
+ temp = swab32(*buf);
+ *buf++ = temp;
+ }
+}
+
+static inline void esdhc_clrset_be(struct sdhci_host *host,
+ u32 mask, u32 val, int reg)
+{
+ void __iomem *base = host->ioaddr + (reg & ~3);
+ u8 shift = (reg & 3) << 3;
+
+ mask <<= shift;
+ val <<= shift;
+
+ if (reg == SDHCI_HOST_CONTROL)
+ val |= ESDHC_PROCTL_D3CD;
+
+ writel((readl(base) & ~mask) | val, base);
+}
+
+/*
+ * Note: mcf is big-endian, single bytes need to be accessed at big endian
+ * offsets.
+ */
+static void esdhc_mcf_writeb_be(struct sdhci_host *host, u8 val, int reg)
+{
+ void __iomem *base = host->ioaddr + (reg & ~3);
+ u8 shift = (reg & 3) << 3;
+ u32 mask = ~(0xff << shift);
+
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 host_ctrl = ESDHC_DEFAULT_HOST_CONTROL;
+ u8 dma_bits = (val & SDHCI_CTRL_DMA_MASK) >> 3;
+ u8 tmp = readb(host->ioaddr + SDHCI_HOST_CONTROL + 1);
+
+ tmp &= ~0x03;
+ tmp |= dma_bits;
+
+ /*
+ * Recomposition needed, restore always endianness and
+ * keep D3CD and AI, just setting bus width.
+ */
+ host_ctrl |= val;
+ host_ctrl |= (dma_bits << 8);
+ writel(host_ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+
+ return;
+ }
+
+ writel((readl(base) & mask) | (val << shift), base);
+}
+
+static void esdhc_mcf_writew_be(struct sdhci_host *host, u16 val, int reg)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+ void __iomem *base = host->ioaddr + (reg & ~3);
+ u8 shift = (reg & 3) << 3;
+ u32 mask = ~(0xffff << shift);
+
+ switch (reg) {
+ case SDHCI_TRANSFER_MODE:
+ mcf_data->aside = val;
+ return;
+ case SDHCI_COMMAND:
+ if (host->cmd->opcode == MMC_STOP_TRANSMISSION)
+ val |= SDHCI_CMD_ABORTCMD;
+
+ /*
+ * As for the fsl driver,
+ * we have to set the mode in a single write here.
+ */
+ writel(val << 16 | mcf_data->aside,
+ host->ioaddr + SDHCI_TRANSFER_MODE);
+ return;
+ }
+
+ writel((readl(base) & mask) | (val << shift), base);
+}
+
+static void esdhc_mcf_writel_be(struct sdhci_host *host, u32 val, int reg)
+{
+ writel(val, host->ioaddr + reg);
+}
+
+static u8 esdhc_mcf_readb_be(struct sdhci_host *host, int reg)
+{
+ if (reg == SDHCI_HOST_CONTROL) {
+ u8 __iomem *base = host->ioaddr + (reg & ~3);
+ u16 val = readw(base + 2);
+ u8 dma_bits = (val >> 5) & SDHCI_CTRL_DMA_MASK;
+ u8 host_ctrl = val & 0xff;
+
+ host_ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ host_ctrl |= dma_bits;
+
+ return host_ctrl;
+ }
+
+ return readb(host->ioaddr + (reg ^ 0x3));
+}
+
+static u16 esdhc_mcf_readw_be(struct sdhci_host *host, int reg)
+{
+ /*
+ * For SDHCI_HOST_VERSION, sdhci specs defines 0xFE,
+ * a wrong offset for us, we are at 0xFC.
+ */
+ if (reg == SDHCI_HOST_VERSION)
+ reg -= 2;
+
+ return readw(host->ioaddr + (reg ^ 0x2));
+}
+
+static u32 esdhc_mcf_readl_be(struct sdhci_host *host, int reg)
+{
+ u32 val;
+
+ val = readl(host->ioaddr + reg);
+
+ /*
+ * RM (25.3.9) sd pin clock must never exceed 25Mhz.
+ * So forcing legacy mode at 25Mhz.
+ */
+ if (unlikely(reg == SDHCI_CAPABILITIES))
+ val &= ~SDHCI_CAN_DO_HISPD;
+
+ if (unlikely(reg == SDHCI_INT_STATUS)) {
+ if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
+ val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
+ val |= SDHCI_INT_ADMA_ERROR;
+ }
+ }
+
+ return val;
+}
+
+static unsigned int esdhc_mcf_get_max_timeout_count(struct sdhci_host *host)
+{
+ return 1 << 27;
+}
+
+static void esdhc_mcf_set_timeout(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ /* Use maximum timeout counter */
+ esdhc_clrset_be(host, ESDHC_SYS_CTRL_DTOCV_MASK, 0xE,
+ SDHCI_TIMEOUT_CONTROL);
+}
+
+static void esdhc_mcf_reset(struct sdhci_host *host, u8 mask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+ sdhci_reset(host, mask);
+
+ esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK,
+ mcf_data->current_bus_width, SDHCI_HOST_CONTROL);
+
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static unsigned int esdhc_mcf_pltfm_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return pltfm_host->clock;
+}
+
+static unsigned int esdhc_mcf_pltfm_get_min_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ return pltfm_host->clock / 256 / 16;
+}
+
+static void esdhc_mcf_pltfm_set_clock(struct sdhci_host *host,
+ unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ unsigned long *pll_dr = (unsigned long *)MCF_PLL_DR;
+ u32 fvco, fsys, fesdhc, temp;
+ const int sdclkfs[] = {2, 4, 8, 16, 32, 64, 128, 256};
+ int delta, old_delta = clock;
+ int i, q, ri, rq;
+
+ if (clock == 0) {
+ host->mmc->actual_clock = 0;
+ return;
+ }
+
+ /*
+ * ColdFire eSDHC clock.s
+ *
+ * pll -+-> / outdiv1 --> fsys
+ * +-> / outdiv3 --> eSDHC clock ---> / SDCCLKFS / DVS
+ *
+ * mcf5441x datasheet says:
+ * (8.1.2) eSDHC should be 40 MHz max
+ * (25.3.9) eSDHC input is, as example, 96 Mhz ...
+ * (25.3.9) sd pin clock must never exceed 25Mhz
+ *
+ * fvco = fsys * outdvi1 + 1
+ * fshdc = fvco / outdiv3 + 1
+ */
+ temp = readl(pll_dr);
+ fsys = pltfm_host->clock;
+ fvco = fsys * ((temp & 0x1f) + 1);
+ fesdhc = fvco / (((temp >> 10) & 0x1f) + 1);
+
+ for (i = 0; i < 8; ++i) {
+ int result = fesdhc / sdclkfs[i];
+
+ for (q = 1; q < 17; ++q) {
+ int finale = result / q;
+
+ delta = abs(clock - finale);
+
+ if (delta < old_delta) {
+ old_delta = delta;
+ ri = i;
+ rq = q;
+ }
+ }
+ }
+
+ /*
+ * Apply divisors and re-enable all the clocks
+ */
+ temp = ((sdclkfs[ri] >> 1) << 8) | ((rq - 1) << 4) |
+ (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN);
+ esdhc_clrset_be(host, 0x0000fff7, temp, SDHCI_CLOCK_CONTROL);
+
+ host->mmc->actual_clock = clock;
+
+ mdelay(1);
+}
+
+static void esdhc_mcf_pltfm_set_bus_width(struct sdhci_host *host, int width)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+ switch (width) {
+ case MMC_BUS_WIDTH_4:
+ mcf_data->current_bus_width = ESDHC_CTRL_4BITBUS;
+ break;
+ default:
+ mcf_data->current_bus_width = 0;
+ break;
+ }
+
+ esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK,
+ mcf_data->current_bus_width, SDHCI_HOST_CONTROL);
+}
+
+static void esdhc_mcf_request_done(struct sdhci_host *host,
+ struct mmc_request *mrq)
+{
+ struct scatterlist *sg;
+ u32 *buffer;
+ int i;
+
+ if (!mrq->data || !mrq->data->bytes_xfered)
+ goto exit_done;
+
+ if (mmc_get_dma_dir(mrq->data) != DMA_FROM_DEVICE)
+ goto exit_done;
+
+ /*
+ * On mcf5441x there is no hw sdma option/flag to select the dma
+ * transfer endiannes. A swap after the transfer is needed.
+ */
+ for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) {
+ buffer = (u32 *)sg_virt(sg);
+ esdhc_mcf_buffer_swap32(buffer, sg->length);
+ }
+
+exit_done:
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void esdhc_mcf_copy_to_bounce_buffer(struct sdhci_host *host,
+ struct mmc_data *data,
+ unsigned int length)
+{
+ sg_copy_to_buffer(data->sg, data->sg_len,
+ host->bounce_buffer, length);
+
+ esdhc_mcf_buffer_swap32((u32 *)host->bounce_buffer,
+ data->blksz * data->blocks);
+}
+
+static struct sdhci_ops sdhci_esdhc_ops = {
+ .reset = esdhc_mcf_reset,
+ .set_clock = esdhc_mcf_pltfm_set_clock,
+ .get_max_clock = esdhc_mcf_pltfm_get_max_clock,
+ .get_min_clock = esdhc_mcf_pltfm_get_min_clock,
+ .set_bus_width = esdhc_mcf_pltfm_set_bus_width,
+ .get_max_timeout_count = esdhc_mcf_get_max_timeout_count,
+ .set_timeout = esdhc_mcf_set_timeout,
+ .write_b = esdhc_mcf_writeb_be,
+ .write_w = esdhc_mcf_writew_be,
+ .write_l = esdhc_mcf_writel_be,
+ .read_b = esdhc_mcf_readb_be,
+ .read_w = esdhc_mcf_readw_be,
+ .read_l = esdhc_mcf_readl_be,
+ .copy_to_bounce_buffer = esdhc_mcf_copy_to_bounce_buffer,
+ .request_done = esdhc_mcf_request_done,
+};
+
+static const struct sdhci_pltfm_data sdhci_esdhc_mcf_pdata = {
+ .ops = &sdhci_esdhc_ops,
+ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_FORCE_DMA,
+ /*
+ * Mandatory quirk,
+ * controller does not support cmd23,
+ * without, on > 8G cards cmd23 is used, and
+ * driver times out.
+ */
+ SDHCI_QUIRK2_HOST_NO_CMD23,
+};
+
+static int esdhc_mcf_plat_init(struct sdhci_host *host,
+ struct pltfm_mcf_data *mcf_data)
+{
+ struct mcf_esdhc_platform_data *plat_data;
+
+ if (!host->mmc->parent->platform_data) {
+ dev_err(mmc_dev(host->mmc), "no platform data!\n");
+ return -EINVAL;
+ }
+
+ plat_data = (struct mcf_esdhc_platform_data *)
+ host->mmc->parent->platform_data;
+
+ /* Card_detect */
+ switch (plat_data->cd_type) {
+ default:
+ case ESDHC_CD_CONTROLLER:
+ /* We have a working card_detect back */
+ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ break;
+ case ESDHC_CD_PERMANENT:
+ host->mmc->caps |= MMC_CAP_NONREMOVABLE;
+ break;
+ case ESDHC_CD_NONE:
+ break;
+ }
+
+ switch (plat_data->max_bus_width) {
+ case 4:
+ host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+ break;
+ case 1:
+ default:
+ host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
+ break;
+ }
+
+ return 0;
+}
+
+static int sdhci_esdhc_mcf_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct pltfm_mcf_data *mcf_data;
+ int err;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_esdhc_mcf_pdata,
+ sizeof(*mcf_data));
+
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+ mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+ host->sdma_boundary = 0;
+
+ host->flags |= SDHCI_AUTO_CMD12;
+
+ mcf_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(mcf_data->clk_ipg)) {
+ err = PTR_ERR(mcf_data->clk_ipg);
+ goto err_exit;
+ }
+
+ mcf_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(mcf_data->clk_ahb)) {
+ err = PTR_ERR(mcf_data->clk_ahb);
+ goto err_exit;
+ }
+
+ mcf_data->clk_per = devm_clk_get(&pdev->dev, "per");
+ if (IS_ERR(mcf_data->clk_per)) {
+ err = PTR_ERR(mcf_data->clk_per);
+ goto err_exit;
+ }
+
+ pltfm_host->clk = mcf_data->clk_per;
+ pltfm_host->clock = clk_get_rate(pltfm_host->clk);
+ err = clk_prepare_enable(mcf_data->clk_per);
+ if (err)
+ goto err_exit;
+
+ err = clk_prepare_enable(mcf_data->clk_ipg);
+ if (err)
+ goto unprep_per;
+
+ err = clk_prepare_enable(mcf_data->clk_ahb);
+ if (err)
+ goto unprep_ipg;
+
+ err = esdhc_mcf_plat_init(host, mcf_data);
+ if (err)
+ goto unprep_ahb;
+
+ err = sdhci_setup_host(host);
+ if (err)
+ goto unprep_ahb;
+
+ if (!host->bounce_buffer) {
+ dev_err(&pdev->dev, "bounce buffer not allocated");
+ err = -ENOMEM;
+ goto cleanup;
+ }
+
+ err = __sdhci_add_host(host);
+ if (err)
+ goto cleanup;
+
+ return 0;
+
+cleanup:
+ sdhci_cleanup_host(host);
+unprep_ahb:
+ clk_disable_unprepare(mcf_data->clk_ahb);
+unprep_ipg:
+ clk_disable_unprepare(mcf_data->clk_ipg);
+unprep_per:
+ clk_disable_unprepare(mcf_data->clk_per);
+err_exit:
+ sdhci_pltfm_free(pdev);
+
+ return err;
+}
+
+static int sdhci_esdhc_mcf_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
+
+ sdhci_remove_host(host, 0);
+
+ clk_disable_unprepare(mcf_data->clk_ipg);
+ clk_disable_unprepare(mcf_data->clk_ahb);
+ clk_disable_unprepare(mcf_data->clk_per);
+
+ sdhci_pltfm_free(pdev);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_esdhc_mcf_driver = {
+ .driver = {
+ .name = "sdhci-esdhc-mcf",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+ .probe = sdhci_esdhc_mcf_probe,
+ .remove = sdhci_esdhc_mcf_remove,
+};
+
+module_platform_driver(sdhci_esdhc_mcf_driver);
+
+MODULE_DESCRIPTION("SDHCI driver for Freescale ColdFire eSDHC");
+MODULE_AUTHOR("Angelo Dureghello <angelo.dureghello@timesys.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h
index 9289bb4..6de02f0 100644
--- a/drivers/mmc/host/sdhci-esdhc.h
+++ b/drivers/mmc/host/sdhci-esdhc.h
@@ -5,7 +5,8 @@
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
* Copyright (c) 2010 Pengutronix e.K.
- * Author: Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright 2020 NXP
+ * Author: Wolfram Sang <kernel@pengutronix.de>
*/
#ifndef _DRIVERS_MMC_SDHCI_ESDHC_H
@@ -31,6 +32,7 @@
/* Present State Register */
#define ESDHC_PRSSTAT 0x24
+#define ESDHC_CLOCK_GATE_OFF 0x00000080
#define ESDHC_CLOCK_STABLE 0x00000008
/* Protocol Control Register */
@@ -87,6 +89,7 @@
/* DLL Config 0 Register */
#define ESDHC_DLLCFG0 0x160
#define ESDHC_DLL_ENABLE 0x80000000
+#define ESDHC_DLL_RESET 0x40000000
#define ESDHC_DLL_FREQ_SEL 0x08000000
/* DLL Config 1 Register */
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index f4f5f0a..b9eb2ec 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -173,6 +173,23 @@
return pltfm_host->clock;
}
+/*
+ * There is a known bug on BCM2711's SDHCI core integration where the
+ * controller will hang when the difference between the core clock and the bus
+ * clock is too great. Specifically this can be reproduced under the following
+ * conditions:
+ *
+ * - No SD card plugged in, polling thread is running, probing cards at
+ * 100 kHz.
+ * - BCM2711's core clock configured at 500MHz or more
+ *
+ * So we set 200kHz as the minimum clock frequency available for that SoC.
+ */
+static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host)
+{
+ return 200000;
+}
+
static const struct sdhci_ops sdhci_iproc_ops = {
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_iproc_get_max_clock,
@@ -261,13 +278,30 @@
.mmc_caps = 0x00000000,
};
+static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
+ .read_l = sdhci_iproc_readl,
+ .read_w = sdhci_iproc_readw,
+ .read_b = sdhci_iproc_readb,
+ .write_l = sdhci_iproc_writel,
+ .write_w = sdhci_iproc_writew,
+ .write_b = sdhci_iproc_writeb,
+ .set_clock = sdhci_set_clock,
+ .set_power = sdhci_set_power_and_bus_voltage,
+ .get_max_clock = sdhci_iproc_get_max_clock,
+ .get_min_clock = sdhci_iproc_bcm2711_get_min_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+};
+
static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
- .ops = &sdhci_iproc_32only_ops,
+ .ops = &sdhci_iproc_bcm2711_ops,
};
static const struct sdhci_iproc_data bcm2711_data = {
.pdata = &sdhci_bcm2711_pltfm_data,
+ .mmc_caps = MMC_CAP_3_3V_DDR,
};
static const struct of_device_id sdhci_iproc_of_match[] = {
@@ -279,12 +313,32 @@
};
MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
+#ifdef CONFIG_ACPI
+/*
+ * This is a duplicate of bcm2835_(pltfrm_)data without caps quirks
+ * which are provided by the ACPI table.
+ */
+static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = {
+ .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_NO_HISPD_BIT,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ .ops = &sdhci_iproc_32only_ops,
+};
+
+static const struct sdhci_iproc_data bcm_arasan_data = {
+ .pdata = &sdhci_bcm_arasan_data,
+};
+
static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
{ .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
+ { .id = "BCM2847", .driver_data = (kernel_ulong_t)&bcm_arasan_data },
+ { .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
+#endif
static int sdhci_iproc_probe(struct platform_device *pdev)
{
@@ -351,6 +405,7 @@
static struct platform_driver sdhci_iproc_driver = {
.driver = {
.name = "sdhci-iproc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_iproc_of_match,
.acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
.pm = &sdhci_pltfm_pmops,
diff --git a/drivers/mmc/host/sdhci-milbeaut.c b/drivers/mmc/host/sdhci-milbeaut.c
new file mode 100644
index 0000000..148b37a
--- /dev/null
+++ b/drivers/mmc/host/sdhci-milbeaut.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
+ * Vincent Yang <vincent.yang@tw.fujitsu.com>
+ * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org>
+ * Copyright (C) 2019 Socionext Inc.
+ * Takao Orito <orito.takao@socionext.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/property.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci_f_sdh30.h"
+
+/* milbeaut bridge controller register */
+#define MLB_SOFT_RESET 0x0200
+#define MLB_SOFT_RESET_RSTX BIT(0)
+
+#define MLB_WP_CD_LED_SET 0x0210
+#define MLB_WP_CD_LED_SET_LED_INV BIT(2)
+
+#define MLB_CR_SET 0x0220
+#define MLB_CR_SET_CR_TOCLKUNIT BIT(24)
+#define MLB_CR_SET_CR_TOCLKFREQ_SFT (16)
+#define MLB_CR_SET_CR_TOCLKFREQ_MASK (0x3F << MLB_CR_SET_CR_TOCLKFREQ_SFT)
+#define MLB_CR_SET_CR_BCLKFREQ_SFT (8)
+#define MLB_CR_SET_CR_BCLKFREQ_MASK (0xFF << MLB_CR_SET_CR_BCLKFREQ_SFT)
+#define MLB_CR_SET_CR_RTUNTIMER_SFT (4)
+#define MLB_CR_SET_CR_RTUNTIMER_MASK (0xF << MLB_CR_SET_CR_RTUNTIMER_SFT)
+
+#define MLB_SD_TOCLK_I_DIV 16
+#define MLB_TOCLKFREQ_UNIT_THRES 16000000
+#define MLB_CAL_TOCLKFREQ_MHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000000)
+#define MLB_CAL_TOCLKFREQ_KHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000)
+#define MLB_TOCLKFREQ_MAX 63
+#define MLB_TOCLKFREQ_MIN 1
+
+#define MLB_SD_BCLK_I_DIV 4
+#define MLB_CAL_BCLKFREQ(rate) (rate / MLB_SD_BCLK_I_DIV / 1000000)
+#define MLB_BCLKFREQ_MAX 255
+#define MLB_BCLKFREQ_MIN 1
+
+#define MLB_CDR_SET 0x0230
+#define MLB_CDR_SET_CLK2POW16 3
+
+struct f_sdhost_priv {
+ struct clk *clk_iface;
+ struct clk *clk;
+ struct device *dev;
+ bool enable_cmd_dat_delay;
+};
+
+static void sdhci_milbeaut_soft_voltage_switch(struct sdhci_host *host)
+{
+ u32 ctrl = 0;
+
+ usleep_range(2500, 3000);
+ ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
+ ctrl |= F_SDH30_CRES_O_DN;
+ sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
+ ctrl |= F_SDH30_MSEL_O_1_8;
+ sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
+
+ ctrl &= ~F_SDH30_CRES_O_DN;
+ sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
+ usleep_range(2500, 3000);
+
+ ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
+ ctrl |= F_SDH30_CMD_CHK_DIS;
+ sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
+}
+
+static unsigned int sdhci_milbeaut_get_min_clock(struct sdhci_host *host)
+{
+ return F_SDH30_MIN_CLOCK;
+}
+
+static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask)
+{
+ struct f_sdhost_priv *priv = sdhci_priv(host);
+ u16 clk;
+ u32 ctl;
+ ktime_t timeout;
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk = (clk & ~SDHCI_CLOCK_CARD_EN) | SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ sdhci_reset(host, mask);
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ timeout = ktime_add_ms(ktime_get(), 10);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (clk & SDHCI_CLOCK_INT_STABLE)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+
+ if (priv->enable_cmd_dat_delay) {
+ ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
+ ctl |= F_SDH30_CMD_DAT_DELAY;
+ sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
+ }
+}
+
+static const struct sdhci_ops sdhci_milbeaut_ops = {
+ .voltage_switch = sdhci_milbeaut_soft_voltage_switch,
+ .get_min_clock = sdhci_milbeaut_get_min_clock,
+ .reset = sdhci_milbeaut_reset,
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_power = sdhci_set_power_and_bus_voltage,
+};
+
+static void sdhci_milbeaut_bridge_reset(struct sdhci_host *host,
+ int reset_flag)
+{
+ if (reset_flag)
+ sdhci_writel(host, 0, MLB_SOFT_RESET);
+ else
+ sdhci_writel(host, MLB_SOFT_RESET_RSTX, MLB_SOFT_RESET);
+}
+
+static void sdhci_milbeaut_bridge_init(struct sdhci_host *host,
+ int rate)
+{
+ u32 val, clk;
+
+ /* IO_SDIO_CR_SET should be set while reset */
+ val = sdhci_readl(host, MLB_CR_SET);
+ val &= ~(MLB_CR_SET_CR_TOCLKFREQ_MASK | MLB_CR_SET_CR_TOCLKUNIT |
+ MLB_CR_SET_CR_BCLKFREQ_MASK);
+ if (rate >= MLB_TOCLKFREQ_UNIT_THRES) {
+ clk = MLB_CAL_TOCLKFREQ_MHZ(rate);
+ clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
+ val |= MLB_CR_SET_CR_TOCLKUNIT |
+ (clk << MLB_CR_SET_CR_TOCLKFREQ_SFT);
+ } else {
+ clk = MLB_CAL_TOCLKFREQ_KHZ(rate);
+ clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
+ clk = max_t(u32, MLB_TOCLKFREQ_MIN, clk);
+ val |= clk << MLB_CR_SET_CR_TOCLKFREQ_SFT;
+ }
+
+ clk = MLB_CAL_BCLKFREQ(rate);
+ clk = min_t(u32, MLB_BCLKFREQ_MAX, clk);
+ clk = max_t(u32, MLB_BCLKFREQ_MIN, clk);
+ val |= clk << MLB_CR_SET_CR_BCLKFREQ_SFT;
+ val &= ~MLB_CR_SET_CR_RTUNTIMER_MASK;
+ sdhci_writel(host, val, MLB_CR_SET);
+
+ sdhci_writel(host, MLB_CDR_SET_CLK2POW16, MLB_CDR_SET);
+
+ sdhci_writel(host, MLB_WP_CD_LED_SET_LED_INV, MLB_WP_CD_LED_SET);
+}
+
+static void sdhci_milbeaut_vendor_init(struct sdhci_host *host)
+{
+ struct f_sdhost_priv *priv = sdhci_priv(host);
+ u32 ctl;
+
+ ctl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
+ ctl |= F_SDH30_CRES_O_DN;
+ sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
+ ctl &= ~F_SDH30_MSEL_O_1_8;
+ sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
+ ctl &= ~F_SDH30_CRES_O_DN;
+ sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
+
+ ctl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
+ ctl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
+ F_SDH30_AHB_INCR_4;
+ ctl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
+ sdhci_writew(host, ctl, F_SDH30_AHB_CONFIG);
+
+ if (priv->enable_cmd_dat_delay) {
+ ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
+ ctl |= F_SDH30_CMD_DAT_DELAY;
+ sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
+ }
+}
+
+static const struct of_device_id mlb_dt_ids[] = {
+ {
+ .compatible = "socionext,milbeaut-m10v-sdhci-3.0",
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mlb_dt_ids);
+
+static void sdhci_milbeaut_init(struct sdhci_host *host)
+{
+ struct f_sdhost_priv *priv = sdhci_priv(host);
+ int rate = clk_get_rate(priv->clk);
+ u16 ctl;
+
+ sdhci_milbeaut_bridge_reset(host, 0);
+
+ ctl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ ctl &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
+ sdhci_writew(host, ctl, SDHCI_CLOCK_CONTROL);
+
+ sdhci_milbeaut_bridge_reset(host, 1);
+
+ sdhci_milbeaut_bridge_init(host, rate);
+ sdhci_milbeaut_bridge_reset(host, 0);
+
+ sdhci_milbeaut_vendor_init(host);
+}
+
+static int sdhci_milbeaut_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct device *dev = &pdev->dev;
+ int irq, ret = 0;
+ struct f_sdhost_priv *priv;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ priv = sdhci_priv(host);
+ priv->dev = dev;
+
+ host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
+ SDHCI_QUIRK_CLOCK_BEFORE_RESET |
+ SDHCI_QUIRK_DELAY_AFTER_POWER;
+ host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
+ SDHCI_QUIRK2_TUNING_WORK_AROUND |
+ SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+
+ priv->enable_cmd_dat_delay = device_property_read_bool(dev,
+ "fujitsu,cmd-dat-delay-select");
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, host);
+
+ host->hw_name = "f_sdh30";
+ host->ops = &sdhci_milbeaut_ops;
+ host->irq = irq;
+
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ goto err;
+ }
+
+ if (dev_of_node(dev)) {
+ sdhci_get_of_property(pdev);
+
+ priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(priv->clk_iface)) {
+ ret = PTR_ERR(priv->clk_iface);
+ goto err;
+ }
+
+ ret = clk_prepare_enable(priv->clk_iface);
+ if (ret)
+ goto err;
+
+ priv->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(priv->clk)) {
+ ret = PTR_ERR(priv->clk);
+ goto err_clk;
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ goto err_clk;
+ }
+
+ sdhci_milbeaut_init(host);
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_add_host;
+
+ return 0;
+
+err_add_host:
+ clk_disable_unprepare(priv->clk);
+err_clk:
+ clk_disable_unprepare(priv->clk_iface);
+err:
+ sdhci_free_host(host);
+ return ret;
+}
+
+static int sdhci_milbeaut_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct f_sdhost_priv *priv = sdhci_priv(host);
+
+ sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
+ 0xffffffff);
+
+ clk_disable_unprepare(priv->clk_iface);
+ clk_disable_unprepare(priv->clk);
+
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_milbeaut_driver = {
+ .driver = {
+ .name = "sdhci-milbeaut",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = of_match_ptr(mlb_dt_ids),
+ },
+ .probe = sdhci_milbeaut_probe,
+ .remove = sdhci_milbeaut_remove,
+};
+
+module_platform_driver(sdhci_milbeaut_driver);
+
+MODULE_DESCRIPTION("MILBEAUT SD Card Controller driver");
+MODULE_AUTHOR("Takao Orito <orito.takao@socionext.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sdhci-milbeaut");
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 8ab9630..588b9a5 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -10,11 +10,15 @@
#include <linux/delay.h>
#include <linux/mmc/mmc.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/iopoll.h>
#include <linux/regulator/consumer.h>
+#include <linux/interconnect.h>
+#include <linux/pinctrl/consumer.h>
#include "sdhci-pltfm.h"
+#include "cqhci.h"
#define CORE_MCI_VERSION 0x50
#define CORE_VERSION_MAJOR_SHIFT 28
@@ -34,7 +38,9 @@
#define CORE_PWRCTL_IO_LOW BIT(2)
#define CORE_PWRCTL_IO_HIGH BIT(3)
#define CORE_PWRCTL_BUS_SUCCESS BIT(0)
+#define CORE_PWRCTL_BUS_FAIL BIT(1)
#define CORE_PWRCTL_IO_SUCCESS BIT(2)
+#define CORE_PWRCTL_IO_FAIL BIT(3)
#define REQ_BUS_OFF BIT(0)
#define REQ_BUS_ON BIT(1)
#define REQ_IO_LOW BIT(2)
@@ -55,19 +61,27 @@
#define CORE_FLL_CYCLE_CNT BIT(18)
#define CORE_DLL_CLOCK_DISABLE BIT(21)
-#define CORE_VENDOR_SPEC_POR_VAL 0xa1c
+#define DLL_USR_CTL_POR_VAL 0x10800
+#define ENABLE_DLL_LOCK_STATUS BIT(26)
+#define FINE_TUNE_MODE_EN BIT(27)
+#define BIAS_OK_SIGNAL BIT(29)
+
+#define DLL_CONFIG_3_LOW_FREQ_VAL 0x08
+#define DLL_CONFIG_3_HIGH_FREQ_VAL 0x10
+
+#define CORE_VENDOR_SPEC_POR_VAL 0xa9c
#define CORE_CLK_PWRSAVE BIT(1)
#define CORE_HC_MCLK_SEL_DFLT (2 << 8)
#define CORE_HC_MCLK_SEL_HS400 (3 << 8)
#define CORE_HC_MCLK_SEL_MASK (3 << 8)
-#define CORE_IO_PAD_PWR_SWITCH_EN (1 << 15)
-#define CORE_IO_PAD_PWR_SWITCH (1 << 16)
+#define CORE_IO_PAD_PWR_SWITCH_EN BIT(15)
+#define CORE_IO_PAD_PWR_SWITCH BIT(16)
#define CORE_HC_SELECT_IN_EN BIT(18)
#define CORE_HC_SELECT_IN_HS400 (6 << 19)
#define CORE_HC_SELECT_IN_MASK (7 << 19)
-#define CORE_3_0V_SUPPORT (1 << 25)
-#define CORE_1_8V_SUPPORT (1 << 26)
+#define CORE_3_0V_SUPPORT BIT(25)
+#define CORE_1_8V_SUPPORT BIT(26)
#define CORE_VOLT_SUPPORT (CORE_3_0V_SUPPORT | CORE_1_8V_SUPPORT)
#define CORE_CSR_CDC_CTLR_CFG0 0x130
@@ -116,12 +130,19 @@
/* Timeout value to avoid infinite waiting for pwr_irq */
#define MSM_PWR_IRQ_TIMEOUT_MS 5000
+/* Max load for eMMC Vdd-io supply */
+#define MMC_VQMMC_MAX_LOAD_UA 325000
+
#define msm_host_readl(msm_host, host, offset) \
msm_host->var_ops->msm_readl_relaxed(host, offset)
#define msm_host_writel(msm_host, val, host, offset) \
msm_host->var_ops->msm_writel_relaxed(val, host, offset)
+/* CQHCI vendor specific registers */
+#define CQHCI_VENDOR_CFG1 0xA00
+#define CQHCI_VENDOR_DIS_RST_ON_CQ_EN (0x3 << 13)
+
struct sdhci_msm_offset {
u32 core_hc_mode;
u32 core_mci_data_cnt;
@@ -151,6 +172,7 @@
u32 core_dll_config_3;
u32 core_ddr_config_old; /* Applicable to sdcc minor ver < 0x49 */
u32 core_ddr_config;
+ u32 core_dll_usr_ctl; /* Present on SDCC5.1 onwards */
};
static const struct sdhci_msm_offset sdhci_msm_v5_offset = {
@@ -180,6 +202,7 @@
.core_dll_config_2 = 0x254,
.core_dll_config_3 = 0x258,
.core_ddr_config = 0x25c,
+ .core_dll_usr_ctl = 0x388,
};
static const struct sdhci_msm_offset sdhci_msm_mci_offset = {
@@ -225,6 +248,7 @@
struct sdhci_msm_variant_info {
bool mci_removed;
bool restore_dll_config;
+ bool uses_tassadar_dll;
const struct sdhci_msm_variant_ops *var_ops;
const struct sdhci_msm_offset *offset;
};
@@ -238,6 +262,7 @@
struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */
unsigned long clk_rate;
struct mmc_host *mmc;
+ struct opp_table *opp_table;
bool use_14lpp_dll_reset;
bool tuning_done;
bool calibration_done;
@@ -255,6 +280,10 @@
bool use_cdr;
u32 transfer_mode;
bool updated_ddr_cfg;
+ bool uses_tassadar_dll;
+ u32 dll_config;
+ u32 ddr_config;
+ bool vqmmc_enabled;
};
static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host)
@@ -327,7 +356,7 @@
int rc;
clock = msm_get_clock_rate_for_bus_mode(host, clock);
- rc = clk_set_rate(core_clk, clock);
+ rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), clock);
if (rc) {
pr_err("%s: Failed to set clock at rate %u at timing %d\n",
mmc_hostname(host->mmc), clock,
@@ -596,6 +625,10 @@
config &= ~CORE_CLK_PWRSAVE;
writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec);
+ if (msm_host->dll_config)
+ writel_relaxed(msm_host->dll_config,
+ host->ioaddr + msm_offset->core_dll_config);
+
if (msm_host->use_14lpp_dll_reset) {
config = readl_relaxed(host->ioaddr +
msm_offset->core_dll_config);
@@ -621,7 +654,9 @@
config |= CORE_DLL_PDN;
writel_relaxed(config, host->ioaddr +
msm_offset->core_dll_config);
- msm_cm_dll_set_freq(host);
+
+ if (!msm_host->dll_config)
+ msm_cm_dll_set_freq(host);
if (msm_host->use_14lpp_dll_reset &&
!IS_ERR_OR_NULL(msm_host->xo_clk)) {
@@ -661,7 +696,8 @@
msm_offset->core_dll_config);
if (msm_host->use_14lpp_dll_reset) {
- msm_cm_dll_set_freq(host);
+ if (!msm_host->dll_config)
+ msm_cm_dll_set_freq(host);
config = readl_relaxed(host->ioaddr +
msm_offset->core_dll_config_2);
config &= ~CORE_DLL_CLOCK_DISABLE;
@@ -669,6 +705,27 @@
msm_offset->core_dll_config_2);
}
+ /*
+ * Configure DLL user control register to enable DLL status.
+ * This setting is applicable to SDCC v5.1 onwards only.
+ */
+ if (msm_host->uses_tassadar_dll) {
+ config = DLL_USR_CTL_POR_VAL | FINE_TUNE_MODE_EN |
+ ENABLE_DLL_LOCK_STATUS | BIAS_OK_SIGNAL;
+ writel_relaxed(config, host->ioaddr +
+ msm_offset->core_dll_usr_ctl);
+
+ config = readl_relaxed(host->ioaddr +
+ msm_offset->core_dll_config_3);
+ config &= ~0xFF;
+ if (msm_host->clk_rate < 150000000)
+ config |= DLL_CONFIG_3_LOW_FREQ_VAL;
+ else
+ config |= DLL_CONFIG_3_HIGH_FREQ_VAL;
+ writel_relaxed(config, host->ioaddr +
+ msm_offset->core_dll_config_3);
+ }
+
config = readl_relaxed(host->ioaddr +
msm_offset->core_dll_config);
config |= CORE_DLL_EN;
@@ -946,7 +1003,7 @@
ddr_cfg_offset = msm_offset->core_ddr_config;
else
ddr_cfg_offset = msm_offset->core_ddr_config_old;
- writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + ddr_cfg_offset);
+ writel_relaxed(msm_host->ddr_config, host->ioaddr + ddr_cfg_offset);
if (mmc->ios.enhanced_strobe) {
config = readl_relaxed(host->ioaddr +
@@ -972,9 +1029,21 @@
goto out;
}
- config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec3);
- config |= CORE_PWRSAVE_DLL;
- writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec3);
+ /*
+ * Set CORE_PWRSAVE_DLL bit in CORE_VENDOR_SPEC3.
+ * When MCLK is gated OFF, it is not gated for less than 0.5us
+ * and MCLK must be switched on for at-least 1us before DATA
+ * starts coming. Controllers with 14lpp and later tech DLL cannot
+ * guarantee above requirement. So PWRSAVE_DLL should not be
+ * turned on for host controllers using this DLL.
+ */
+ if (!msm_host->use_14lpp_dll_reset) {
+ config = readl_relaxed(host->ioaddr +
+ msm_offset->core_vendor_spec3);
+ config |= CORE_PWRSAVE_DLL;
+ writel_relaxed(config, host->ioaddr +
+ msm_offset->core_vendor_spec3);
+ }
/*
* Drain writebuffer to ensure above DLL calibration
@@ -1300,6 +1369,108 @@
sdhci_msm_hs400(host, &mmc->ios);
}
+static int sdhci_msm_set_pincfg(struct sdhci_msm_host *msm_host, bool level)
+{
+ struct platform_device *pdev = msm_host->pdev;
+ int ret;
+
+ if (level)
+ ret = pinctrl_pm_select_default_state(&pdev->dev);
+ else
+ ret = pinctrl_pm_select_sleep_state(&pdev->dev);
+
+ return ret;
+}
+
+static int sdhci_msm_set_vmmc(struct mmc_host *mmc)
+{
+ if (IS_ERR(mmc->supply.vmmc))
+ return 0;
+
+ return mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, mmc->ios.vdd);
+}
+
+static int msm_toggle_vqmmc(struct sdhci_msm_host *msm_host,
+ struct mmc_host *mmc, bool level)
+{
+ int ret;
+ struct mmc_ios ios;
+
+ if (msm_host->vqmmc_enabled == level)
+ return 0;
+
+ if (level) {
+ /* Set the IO voltage regulator to default voltage level */
+ if (msm_host->caps_0 & CORE_3_0V_SUPPORT)
+ ios.signal_voltage = MMC_SIGNAL_VOLTAGE_330;
+ else if (msm_host->caps_0 & CORE_1_8V_SUPPORT)
+ ios.signal_voltage = MMC_SIGNAL_VOLTAGE_180;
+
+ if (msm_host->caps_0 & CORE_VOLT_SUPPORT) {
+ ret = mmc_regulator_set_vqmmc(mmc, &ios);
+ if (ret < 0) {
+ dev_err(mmc_dev(mmc), "%s: vqmmc set volgate failed: %d\n",
+ mmc_hostname(mmc), ret);
+ goto out;
+ }
+ }
+ ret = regulator_enable(mmc->supply.vqmmc);
+ } else {
+ ret = regulator_disable(mmc->supply.vqmmc);
+ }
+
+ if (ret)
+ dev_err(mmc_dev(mmc), "%s: vqmm %sable failed: %d\n",
+ mmc_hostname(mmc), level ? "en":"dis", ret);
+ else
+ msm_host->vqmmc_enabled = level;
+out:
+ return ret;
+}
+
+static int msm_config_vqmmc_mode(struct sdhci_msm_host *msm_host,
+ struct mmc_host *mmc, bool hpm)
+{
+ int load, ret;
+
+ load = hpm ? MMC_VQMMC_MAX_LOAD_UA : 0;
+ ret = regulator_set_load(mmc->supply.vqmmc, load);
+ if (ret)
+ dev_err(mmc_dev(mmc), "%s: vqmmc set load failed: %d\n",
+ mmc_hostname(mmc), ret);
+ return ret;
+}
+
+static int sdhci_msm_set_vqmmc(struct sdhci_msm_host *msm_host,
+ struct mmc_host *mmc, bool level)
+{
+ int ret;
+ bool always_on;
+
+ if (IS_ERR(mmc->supply.vqmmc) ||
+ (mmc->ios.power_mode == MMC_POWER_UNDEFINED))
+ return 0;
+ /*
+ * For eMMC don't turn off Vqmmc, Instead just configure it in LPM
+ * and HPM modes by setting the corresponding load.
+ *
+ * Till eMMC is initialized (i.e. always_on == 0), just turn on/off
+ * Vqmmc. Vqmmc gets turned off only if init fails and mmc_power_off
+ * gets invoked. Once eMMC is initialized (i.e. always_on == 1),
+ * Vqmmc should remain ON, So just set the load instead of turning it
+ * off/on.
+ */
+ always_on = !mmc_card_is_removable(mmc) &&
+ mmc->card && mmc_card_mmc(mmc->card);
+
+ if (always_on)
+ ret = msm_config_vqmmc_mode(msm_host, mmc, level);
+ else
+ ret = msm_toggle_vqmmc(msm_host, mmc, level);
+
+ return ret;
+}
+
static inline void sdhci_msm_init_pwr_irq_wait(struct sdhci_msm_host *msm_host)
{
init_waitqueue_head(&msm_host->pwr_irq_wait);
@@ -1317,7 +1488,7 @@
* To what state the register writes will change the IO lines should be passed
* as the argument req_type. This API will check whether the IO line's state
* is already the expected state and will wait for power irq only if
- * power irq is expected to be trigerred based on the current IO line state
+ * power irq is expected to be triggered based on the current IO line state
* and expected IO line state.
*/
static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type)
@@ -1403,8 +1574,9 @@
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ struct mmc_host *mmc = host->mmc;
u32 irq_status, irq_ack = 0;
- int retry = 10;
+ int retry = 10, ret;
u32 pwr_state = 0, io_level = 0;
u32 config;
const struct sdhci_msm_offset *msm_offset = msm_host->offset;
@@ -1442,21 +1614,45 @@
if (irq_status & CORE_PWRCTL_BUS_ON) {
pwr_state = REQ_BUS_ON;
io_level = REQ_IO_HIGH;
- irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
}
if (irq_status & CORE_PWRCTL_BUS_OFF) {
pwr_state = REQ_BUS_OFF;
io_level = REQ_IO_LOW;
- irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
}
+
+ if (pwr_state) {
+ ret = sdhci_msm_set_vmmc(mmc);
+ if (!ret)
+ ret = sdhci_msm_set_vqmmc(msm_host, mmc,
+ pwr_state & REQ_BUS_ON);
+ if (!ret)
+ ret = sdhci_msm_set_pincfg(msm_host,
+ pwr_state & REQ_BUS_ON);
+ if (!ret)
+ irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+ else
+ irq_ack |= CORE_PWRCTL_BUS_FAIL;
+ }
+
/* Handle IO LOW/HIGH */
- if (irq_status & CORE_PWRCTL_IO_LOW) {
+ if (irq_status & CORE_PWRCTL_IO_LOW)
io_level = REQ_IO_LOW;
- irq_ack |= CORE_PWRCTL_IO_SUCCESS;
- }
- if (irq_status & CORE_PWRCTL_IO_HIGH) {
+
+ if (irq_status & CORE_PWRCTL_IO_HIGH)
io_level = REQ_IO_HIGH;
+
+ if (io_level)
irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+
+ if (io_level && !IS_ERR(mmc->supply.vqmmc) && !pwr_state) {
+ ret = mmc_regulator_set_vqmmc(mmc, &mmc->ios);
+ if (ret < 0) {
+ dev_err(mmc_dev(mmc), "%s: IO_level setting failed(%d). signal_voltage: %d, vdd: %d irq_status: 0x%08x\n",
+ mmc_hostname(mmc), ret,
+ mmc->ios.signal_voltage, mmc->ios.vdd,
+ irq_status);
+ irq_ack |= CORE_PWRCTL_IO_FAIL;
+ }
}
/*
@@ -1505,7 +1701,7 @@
if (io_level)
msm_host->curr_io_level = io_level;
- pr_debug("%s: %s: Handled IRQ(%d), irq_status=0x%x, ack=0x%x\n",
+ dev_dbg(mmc_dev(mmc), "%s: %s: Handled IRQ(%d), irq_status=0x%x, ack=0x%x\n",
mmc_hostname(msm_host->mmc), __func__, irq, irq_status,
irq_ack);
}
@@ -1538,7 +1734,7 @@
return SDHCI_MSM_MIN_CLOCK;
}
-/**
+/*
* __sdhci_msm_set_clock - sdhci_msm clock control.
*
* Description:
@@ -1589,6 +1785,55 @@
__sdhci_msm_set_clock(host, clock);
}
+/*****************************************************************************\
+ * *
+ * MSM Command Queue Engine (CQE) *
+ * *
+\*****************************************************************************/
+
+static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask)
+{
+ int cmd_error = 0;
+ int data_error = 0;
+
+ if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+ return intmask;
+
+ cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+ return 0;
+}
+
+static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ u32 ctrl;
+
+ /*
+ * When CQE is halted, the legacy SDHCI path operates only
+ * on 16-byte descriptors in 64bit mode.
+ */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->desc_sz = 16;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * During CQE command transfers, command complete bit gets latched.
+ * So s/w should clear command complete interrupt status when CQE is
+ * either halted or disabled. Otherwise unexpected SDCHI legacy
+ * interrupt gets triggered when CQE is halted/disabled.
+ */
+ ctrl = sdhci_readl(host, SDHCI_INT_ENABLE);
+ ctrl |= SDHCI_INT_RESPONSE;
+ sdhci_writel(host, ctrl, SDHCI_INT_ENABLE);
+ sdhci_writel(host, SDHCI_INT_RESPONSE, SDHCI_INT_STATUS);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ sdhci_cqe_disable(mmc, recovery);
+}
+
static void sdhci_msm_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
{
u32 count, start = 15;
@@ -1606,6 +1851,78 @@
host->data_timeout = 22LL * NSEC_PER_SEC;
}
+static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
+ .enable = sdhci_cqe_enable,
+ .disable = sdhci_msm_cqe_disable,
+};
+
+static int sdhci_msm_cqe_add_host(struct sdhci_host *host,
+ struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ struct cqhci_host *cq_host;
+ bool dma64;
+ u32 cqcfg;
+ int ret;
+
+ /*
+ * When CQE is halted, SDHC operates only on 16byte ADMA descriptors.
+ * So ensure ADMA table is allocated for 16byte descriptors.
+ */
+ if (host->caps & SDHCI_CAN_64BIT)
+ host->alloc_desc_sz = 16;
+
+ ret = sdhci_setup_host(host);
+ if (ret)
+ return ret;
+
+ cq_host = cqhci_pltfm_init(pdev);
+ if (IS_ERR(cq_host)) {
+ ret = PTR_ERR(cq_host);
+ dev_err(&pdev->dev, "cqhci-pltfm init: failed: %d\n", ret);
+ goto cleanup;
+ }
+
+ msm_host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+ cq_host->ops = &sdhci_msm_cqhci_ops;
+
+ dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+
+ ret = cqhci_init(cq_host, host->mmc, dma64);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n",
+ mmc_hostname(host->mmc), ret);
+ goto cleanup;
+ }
+
+ /* Disable cqe reset due to cqe enable signal */
+ cqcfg = cqhci_readl(cq_host, CQHCI_VENDOR_CFG1);
+ cqcfg |= CQHCI_VENDOR_DIS_RST_ON_CQ_EN;
+ cqhci_writel(cq_host, cqcfg, CQHCI_VENDOR_CFG1);
+
+ /*
+ * SDHC expects 12byte ADMA descriptors till CQE is enabled.
+ * So limit desc_sz to 12 so that the data commands that are sent
+ * during card initialization (before CQE gets enabled) would
+ * get executed without any issues.
+ */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->desc_sz = 12;
+
+ ret = __sdhci_add_host(host);
+ if (ret)
+ goto cleanup;
+
+ dev_info(&pdev->dev, "%s: CQE init: success\n",
+ mmc_hostname(host->mmc));
+ return ret;
+
+cleanup:
+ sdhci_cleanup_host(host);
+ return ret;
+}
+
/*
* Platform specific register write functions. This is so that, if any
* register write needs to be followed up by platform specific actions,
@@ -1724,6 +2041,108 @@
pr_debug("%s: supported caps: 0x%08x\n", mmc_hostname(mmc), caps);
}
+static void sdhci_msm_reset(struct sdhci_host *host, u8 mask)
+{
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL))
+ cqhci_deactivate(host->mmc);
+ sdhci_reset(host, mask);
+}
+
+static int sdhci_msm_register_vreg(struct sdhci_msm_host *msm_host)
+{
+ int ret;
+
+ ret = mmc_regulator_get_supply(msm_host->mmc);
+ if (ret)
+ return ret;
+
+ sdhci_msm_set_regulator_caps(msm_host);
+
+ return 0;
+}
+
+static int sdhci_msm_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u16 ctrl, status;
+
+ /*
+ * Signal Voltage Switching is only applicable for Host Controllers
+ * v3.00 and above.
+ */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ if (!(host->flags & SDHCI_SIGNALING_330))
+ return -EINVAL;
+
+ /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
+ ctrl &= ~SDHCI_CTRL_VDD_180;
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ if (!(host->flags & SDHCI_SIGNALING_180))
+ return -EINVAL;
+
+ /* Enable 1.8V Signal Enable in the Host Control2 register */
+ ctrl |= SDHCI_CTRL_VDD_180;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+
+ /* Wait for 5ms */
+ usleep_range(5000, 5500);
+
+ /* regulator output should be stable within 5 ms */
+ status = ctrl & SDHCI_CTRL_VDD_180;
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if ((ctrl & SDHCI_CTRL_VDD_180) == status)
+ return 0;
+
+ dev_warn(mmc_dev(mmc), "%s: Regulator output did not became stable\n",
+ mmc_hostname(mmc));
+
+ return -EAGAIN;
+}
+
+#define DRIVER_NAME "sdhci_msm"
+#define SDHCI_MSM_DUMP(f, x...) \
+ pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)
+
+static void sdhci_msm_dump_vendor_regs(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ const struct sdhci_msm_offset *msm_offset = msm_host->offset;
+
+ SDHCI_MSM_DUMP("----------- VENDOR REGISTER DUMP -----------\n");
+
+ SDHCI_MSM_DUMP(
+ "DLL sts: 0x%08x | DLL cfg: 0x%08x | DLL cfg2: 0x%08x\n",
+ readl_relaxed(host->ioaddr + msm_offset->core_dll_status),
+ readl_relaxed(host->ioaddr + msm_offset->core_dll_config),
+ readl_relaxed(host->ioaddr + msm_offset->core_dll_config_2));
+ SDHCI_MSM_DUMP(
+ "DLL cfg3: 0x%08x | DLL usr ctl: 0x%08x | DDR cfg: 0x%08x\n",
+ readl_relaxed(host->ioaddr + msm_offset->core_dll_config_3),
+ readl_relaxed(host->ioaddr + msm_offset->core_dll_usr_ctl),
+ readl_relaxed(host->ioaddr + msm_offset->core_ddr_config));
+ SDHCI_MSM_DUMP(
+ "Vndr func: 0x%08x | Vndr func2 : 0x%08x Vndr func3: 0x%08x\n",
+ readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec),
+ readl_relaxed(host->ioaddr +
+ msm_offset->core_vendor_spec_func2),
+ readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec3));
+}
+
static const struct sdhci_msm_variant_ops mci_var_ops = {
.msm_readl_relaxed = sdhci_msm_mci_variant_readl_relaxed,
.msm_writel_relaxed = sdhci_msm_mci_variant_writel_relaxed,
@@ -1752,17 +2171,26 @@
.offset = &sdhci_msm_v5_offset,
};
+static const struct sdhci_msm_variant_info sm8250_sdhci_var = {
+ .mci_removed = true,
+ .uses_tassadar_dll = true,
+ .var_ops = &v5_var_ops,
+ .offset = &sdhci_msm_v5_offset,
+};
+
static const struct of_device_id sdhci_msm_dt_match[] = {
{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
{.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
+ {.compatible = "qcom,sm8250-sdhci", .data = &sm8250_sdhci_var},
+ {.compatible = "qcom,sc7180-sdhci", .data = &sdm845_sdhci_var},
{},
};
MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
static const struct sdhci_ops sdhci_msm_ops = {
- .reset = sdhci_reset,
+ .reset = sdhci_msm_reset,
.set_clock = sdhci_msm_set_clock,
.get_min_clock = sdhci_msm_get_min_clock,
.get_max_clock = sdhci_msm_get_max_clock,
@@ -1770,6 +2198,9 @@
.set_uhs_signaling = sdhci_msm_set_uhs_signaling,
.write_w = sdhci_msm_writew,
.write_b = sdhci_msm_writeb,
+ .irq = sdhci_msm_cqe_irq,
+ .dump_vendor_regs = sdhci_msm_dump_vendor_regs,
+ .set_power = sdhci_set_power_noreg,
.set_timeout = sdhci_msm_set_timeout,
};
@@ -1783,12 +2214,26 @@
.ops = &sdhci_msm_ops,
};
+static inline void sdhci_msm_get_of_property(struct platform_device *pdev,
+ struct sdhci_host *host)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+
+ if (of_property_read_u32(node, "qcom,ddr-config",
+ &msm_host->ddr_config))
+ msm_host->ddr_config = DDR_CONFIG_POR_VAL;
+
+ of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config);
+}
+
+
static int sdhci_msm_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_msm_host *msm_host;
- struct resource *core_memres;
struct clk *clk;
int ret;
u16 host_version, core_minor;
@@ -1796,6 +2241,7 @@
u8 core_major;
const struct sdhci_msm_offset *msm_offset;
const struct sdhci_msm_variant_info *var_info;
+ struct device_node *node = pdev->dev.of_node;
host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host));
if (IS_ERR(host))
@@ -1821,10 +2267,12 @@
msm_host->restore_dll_config = var_info->restore_dll_config;
msm_host->var_ops = var_info->var_ops;
msm_host->offset = var_info->offset;
+ msm_host->uses_tassadar_dll = var_info->uses_tassadar_dll;
msm_offset = msm_host->offset;
sdhci_get_of_property(pdev);
+ sdhci_msm_get_of_property(pdev, host);
msm_host->saved_tuning_phase = INVALID_TUNING_PHASE;
@@ -1858,8 +2306,26 @@
}
msm_host->bulk_clks[0].clk = clk;
+ /* Check for optional interconnect paths */
+ ret = dev_pm_opp_of_find_icc_paths(&pdev->dev, NULL);
+ if (ret)
+ goto bus_clk_disable;
+
+ msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
+ if (IS_ERR(msm_host->opp_table)) {
+ ret = PTR_ERR(msm_host->opp_table);
+ goto bus_clk_disable;
+ }
+
+ /* OPP table is optional */
+ ret = dev_pm_opp_of_add_table(&pdev->dev);
+ if (ret && ret != -ENODEV) {
+ dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
+ goto opp_put_clkname;
+ }
+
/* Vote for maximum clock rate for maximum performance */
- ret = clk_set_rate(clk, INT_MAX);
+ ret = dev_pm_opp_set_rate(&pdev->dev, INT_MAX);
if (ret)
dev_warn(&pdev->dev, "core clock boost failed\n");
@@ -1876,7 +2342,7 @@
ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
msm_host->bulk_clks);
if (ret)
- goto bus_clk_disable;
+ goto opp_cleanup;
/*
* xo clock is needed for FLL feature of cm_dll.
@@ -1889,10 +2355,7 @@
}
if (!msm_host->mci_removed) {
- core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- msm_host->core_mem = devm_ioremap_resource(&pdev->dev,
- core_memres);
-
+ msm_host->core_mem = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(msm_host->core_mem)) {
ret = PTR_ERR(msm_host->core_mem);
goto clk_disable;
@@ -1951,6 +2414,10 @@
if (core_major == 1 && core_minor >= 0x49)
msm_host->updated_ddr_cfg = true;
+ ret = sdhci_msm_register_vreg(msm_host);
+ if (ret)
+ goto clk_disable;
+
/*
* Power on reset state may trigger power irq if previous status of
* PWRCTL was either BUS_ON or IO_HIGH_V. So before enabling pwr irq
@@ -1995,11 +2462,15 @@
MSM_MMC_AUTOSUSPEND_DELAY_MS);
pm_runtime_use_autosuspend(&pdev->dev);
+ host->mmc_host_ops.start_signal_voltage_switch =
+ sdhci_msm_start_signal_voltage_switch;
host->mmc_host_ops.execute_tuning = sdhci_msm_execute_tuning;
- ret = sdhci_add_host(host);
+ if (of_property_read_bool(node, "supports-cqe"))
+ ret = sdhci_msm_cqe_add_host(host, pdev);
+ else
+ ret = sdhci_add_host(host);
if (ret)
goto pm_runtime_disable;
- sdhci_msm_set_regulator_caps(msm_host);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
@@ -2013,6 +2484,10 @@
clk_disable:
clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
msm_host->bulk_clks);
+opp_cleanup:
+ dev_pm_opp_of_remove_table(&pdev->dev);
+opp_put_clkname:
+ dev_pm_opp_put_clkname(msm_host->opp_table);
bus_clk_disable:
if (!IS_ERR(msm_host->bus_clk))
clk_disable_unprepare(msm_host->bus_clk);
@@ -2031,6 +2506,8 @@
sdhci_remove_host(host, dead);
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ dev_pm_opp_put_clkname(msm_host->opp_table);
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
@@ -2049,6 +2526,8 @@
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ /* Drop the performance vote */
+ dev_pm_opp_set_rate(dev, 0);
clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
msm_host->bulk_clks);
@@ -2071,9 +2550,11 @@
* restore the SDR DLL settings when the clock is ungated.
*/
if (msm_host->restore_dll_config && msm_host->clk_rate)
- return sdhci_msm_restore_sdr_dll_config(host);
+ ret = sdhci_msm_restore_sdr_dll_config(host);
- return 0;
+ dev_pm_opp_set_rate(dev, msm_host->clk_rate);
+
+ return ret;
}
static const struct dev_pm_ops sdhci_msm_pm_ops = {
@@ -2091,6 +2572,7 @@
.name = "sdhci_msm",
.of_match_table = sdhci_msm_dt_match,
.pm = &sdhci_msm_pm_ops,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index dd10f7a..fc38db6 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -22,16 +22,35 @@
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/of.h>
+#include <linux/firmware/xlnx-zynqmp.h>
#include "cqhci.h"
#include "sdhci-pltfm.h"
#define SDHCI_ARASAN_VENDOR_REGISTER 0x78
+
+#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8
+#define SDHCI_ARASAN_ITAPDLY_SEL_MASK 0xFF
+
+#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC
+#define SDHCI_ARASAN_OTAPDLY_SEL_MASK 0x3F
+
#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200
#define VENDOR_ENHANCED_STROBE BIT(0)
#define PHY_CLK_TOO_SLOW_HZ 400000
+#define SDHCI_ITAPDLY_CHGWIN 0x200
+#define SDHCI_ITAPDLY_ENABLE 0x100
+#define SDHCI_OTAPDLY_ENABLE 0x40
+
+/* Default settings for ZynqMP Clock Phases */
+#define ZYNQMP_ICLK_PHASE {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0}
+#define ZYNQMP_OCLK_PHASE {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}
+
+#define VERSAL_ICLK_PHASE {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}
+#define VERSAL_OCLK_PHASE {0, 60, 48, 0, 48, 72, 90, 36, 60, 90, 0}
+
/*
* On some SoCs the syscon area has a feature where the upper 16-bits of
* each 32-bit register act as a write mask for the lower 16-bits. This allows
@@ -57,30 +76,69 @@
/**
* struct sdhci_arasan_soc_ctl_map - Map in syscon to corecfg registers
*
+ * @baseclkfreq: Where to find corecfg_baseclkfreq
+ * @clockmultiplier: Where to find corecfg_clockmultiplier
+ * @support64b: Where to find SUPPORT64B bit
+ * @hiword_update: If true, use HIWORD_UPDATE to access the syscon
+ *
* It's up to the licensee of the Arsan IP block to make these available
* somewhere if needed. Presumably these will be scattered somewhere that's
* accessible via the syscon API.
- *
- * @baseclkfreq: Where to find corecfg_baseclkfreq
- * @clockmultiplier: Where to find corecfg_clockmultiplier
- * @hiword_update: If true, use HIWORD_UPDATE to access the syscon
*/
struct sdhci_arasan_soc_ctl_map {
struct sdhci_arasan_soc_ctl_field baseclkfreq;
struct sdhci_arasan_soc_ctl_field clockmultiplier;
+ struct sdhci_arasan_soc_ctl_field support64b;
bool hiword_update;
};
/**
- * struct sdhci_arasan_data
+ * struct sdhci_arasan_clk_ops - Clock Operations for Arasan SD controller
+ *
+ * @sdcardclk_ops: The output clock related operations
+ * @sampleclk_ops: The sample clock related operations
+ */
+struct sdhci_arasan_clk_ops {
+ const struct clk_ops *sdcardclk_ops;
+ const struct clk_ops *sampleclk_ops;
+};
+
+/**
+ * struct sdhci_arasan_clk_data - Arasan Controller Clock Data.
+ *
+ * @sdcardclk_hw: Struct for the clock we might provide to a PHY.
+ * @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw.
+ * @sampleclk_hw: Struct for the clock we might provide to a PHY.
+ * @sampleclk: Pointer to normal 'struct clock' for sampleclk_hw.
+ * @clk_phase_in: Array of Input Clock Phase Delays for all speed modes
+ * @clk_phase_out: Array of Output Clock Phase Delays for all speed modes
+ * @set_clk_delays: Function pointer for setting Clock Delays
+ * @clk_of_data: Platform specific runtime clock data storage pointer
+ */
+struct sdhci_arasan_clk_data {
+ struct clk_hw sdcardclk_hw;
+ struct clk *sdcardclk;
+ struct clk_hw sampleclk_hw;
+ struct clk *sampleclk;
+ int clk_phase_in[MMC_TIMING_MMC_HS400 + 1];
+ int clk_phase_out[MMC_TIMING_MMC_HS400 + 1];
+ void (*set_clk_delays)(struct sdhci_host *host);
+ void *clk_of_data;
+};
+
+/**
+ * struct sdhci_arasan_data - Arasan Controller Data
+ *
* @host: Pointer to the main SDHCI host structure.
* @clk_ahb: Pointer to the AHB clock
* @phy: Pointer to the generic phy
* @is_phy_on: True if the PHY is on; false if not.
- * @sdcardclk_hw: Struct for the clock we might provide to a PHY.
- * @sdcardclk: Pointer to normal 'struct clock' for sdcardclk_hw.
+ * @has_cqe: True if controller has command queuing engine.
+ * @clk_data: Struct for the Arasan Controller Clock Data.
+ * @clk_ops: Struct for the Arasan Controller Clock Operations.
* @soc_ctl_base: Pointer to regmap for syscon for soc_ctl registers.
* @soc_ctl_map: Map to get offsets into soc_ctl registers.
+ * @quirks: Arasan deviations from spec.
*/
struct sdhci_arasan_data {
struct sdhci_host *host;
@@ -89,23 +147,30 @@
bool is_phy_on;
bool has_cqe;
- struct clk_hw sdcardclk_hw;
- struct clk *sdcardclk;
+ struct sdhci_arasan_clk_data clk_data;
+ const struct sdhci_arasan_clk_ops *clk_ops;
struct regmap *soc_ctl_base;
const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
- unsigned int quirks; /* Arasan deviations from spec */
+ unsigned int quirks;
/* Controller does not have CD wired and will not function normally without */
#define SDHCI_ARASAN_QUIRK_FORCE_CDTEST BIT(0)
/* Controller immediately reports SDHCI_CLOCK_INT_STABLE after enabling the
* internal clock even when the clock isn't stable */
#define SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE BIT(1)
+/*
+ * Some of the Arasan variations might not have timing requirements
+ * met at 25MHz for Default Speed mode, those controllers work at
+ * 19MHz instead
+ */
+#define SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN BIT(2)
};
struct sdhci_arasan_of_data {
const struct sdhci_arasan_soc_ctl_map *soc_ctl_map;
const struct sdhci_pltfm_data *pdata;
+ const struct sdhci_arasan_clk_ops *clk_ops;
};
static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
@@ -120,17 +185,32 @@
.hiword_update = false,
};
+static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = {
+ .baseclkfreq = { .reg = 0x80, .width = 8, .shift = 2 },
+ .clockmultiplier = { .reg = 0, .width = -1, .shift = -1 },
+ .hiword_update = false,
+};
+
+static const struct sdhci_arasan_soc_ctl_map intel_keembay_soc_ctl_map = {
+ .baseclkfreq = { .reg = 0x0, .width = 8, .shift = 14 },
+ .clockmultiplier = { .reg = 0x4, .width = 8, .shift = 14 },
+ .support64b = { .reg = 0x4, .width = 1, .shift = 24 },
+ .hiword_update = false,
+};
+
/**
* sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
*
+ * @host: The sdhci_host
+ * @fld: The field to write to
+ * @val: The value to write
+ *
* This function allows writing to fields in sdhci_arasan_soc_ctl_map.
* Note that if a field is specified as not available (shift < 0) then
* this function will silently return an error code. It will be noisy
* and print errors for any other (unexpected) errors.
*
- * @host: The sdhci_host
- * @fld: The field to write to
- * @val: The value to write
+ * Return: 0 on success and error value on error
*/
static int sdhci_arasan_syscon_write(struct sdhci_host *host,
const struct sdhci_arasan_soc_ctl_field *fld,
@@ -174,6 +254,7 @@
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
bool ctrl_phy = false;
if (!IS_ERR(sdhci_arasan->phy)) {
@@ -220,6 +301,20 @@
sdhci_arasan->is_phy_on = false;
}
+ if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN) {
+ /*
+ * Some of the Arasan variations might not have timing
+ * requirements met at 25MHz for Default Speed mode,
+ * those controllers work at 19MHz instead.
+ */
+ if (clock == DEFAULT_SPEED_MAX_DTR)
+ clock = (DEFAULT_SPEED_MAX_DTR * 19) / 25;
+ }
+
+ /* Set the Input and Output Clock Phase Delays */
+ if (clk_data->set_clk_delays)
+ clk_data->set_clk_delays(host);
+
sdhci_set_clock(host, clock);
if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE)
@@ -295,17 +390,6 @@
return -EINVAL;
}
-static void sdhci_arasan_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
-{
- if (!IS_ERR(host->mmc->supply.vmmc)) {
- struct mmc_host *mmc = host->mmc;
-
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
- }
- sdhci_set_power_noreg(host, mode, vdd);
-}
-
static const struct sdhci_ops sdhci_arasan_ops = {
.set_clock = sdhci_arasan_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
@@ -313,19 +397,7 @@
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_arasan_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
- .set_power = sdhci_arasan_set_power,
-};
-
-static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
- .ops = &sdhci_arasan_ops,
- .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
- SDHCI_QUIRK2_STOP_WITH_TC,
-};
-
-static struct sdhci_arasan_of_data sdhci_arasan_data = {
- .pdata = &sdhci_arasan_pdata,
+ .set_power = sdhci_set_power_and_bus_voltage,
};
static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
@@ -373,7 +445,7 @@
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_arasan_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
- .set_power = sdhci_arasan_set_power,
+ .set_power = sdhci_set_power_and_bus_voltage,
.irq = sdhci_arasan_cqhci_irq,
};
@@ -384,23 +456,14 @@
SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
};
-static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
- .soc_ctl_map = &rk3399_soc_ctl_map,
- .pdata = &sdhci_arasan_cqe_pdata,
-};
-
-static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
- .soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
- .pdata = &sdhci_arasan_cqe_pdata,
-};
-
#ifdef CONFIG_PM_SLEEP
/**
* sdhci_arasan_suspend - Suspend method for the driver
* @dev: Address of the device structure
- * Returns 0 on success and error value on error
*
* Put the device in a low power state.
+ *
+ * Return: 0 on success and error value on error
*/
static int sdhci_arasan_suspend(struct device *dev)
{
@@ -443,9 +506,10 @@
/**
* sdhci_arasan_resume - Resume method for the driver
* @dev: Address of the device structure
- * Returns 0 on success and error value on error
*
* Resume operation after suspend
+ *
+ * Return: 0 on success and error value on error
*/
static int sdhci_arasan_resume(struct device *dev)
{
@@ -491,49 +555,24 @@
static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
sdhci_arasan_resume);
-static const struct of_device_id sdhci_arasan_of_match[] = {
- /* SoC-specific compatible strings w/ soc_ctl_map */
- {
- .compatible = "rockchip,rk3399-sdhci-5.1",
- .data = &sdhci_arasan_rk3399_data,
- },
- {
- .compatible = "intel,lgm-sdhci-5.1-emmc",
- .data = &intel_lgm_emmc_data,
- },
- /* Generic compatible below here */
- {
- .compatible = "arasan,sdhci-8.9a",
- .data = &sdhci_arasan_data,
- },
- {
- .compatible = "arasan,sdhci-5.1",
- .data = &sdhci_arasan_data,
- },
- {
- .compatible = "arasan,sdhci-4.9a",
- .data = &sdhci_arasan_data,
- },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
-
/**
* sdhci_arasan_sdcardclk_recalc_rate - Return the card clock rate
*
+ * @hw: Pointer to the hardware clock structure.
+ * @parent_rate: The parent rate (should be rate of clk_xin).
+ *
* Return the current actual rate of the SD card clock. This can be used
* to communicate with out PHY.
*
- * @hw: Pointer to the hardware clock structure.
- * @parent_rate The parent rate (should be rate of clk_xin).
- * Returns the card clock rate.
+ * Return: The card clock rate.
*/
static unsigned long sdhci_arasan_sdcardclk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
-
{
+ struct sdhci_arasan_clk_data *clk_data =
+ container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
struct sdhci_arasan_data *sdhci_arasan =
- container_of(hw, struct sdhci_arasan_data, sdcardclk_hw);
+ container_of(clk_data, struct sdhci_arasan_data, clk_data);
struct sdhci_host *host = sdhci_arasan->host;
return host->mmc->actual_clock;
@@ -544,8 +583,342 @@
};
/**
+ * sdhci_arasan_sampleclk_recalc_rate - Return the sampling clock rate
+ *
+ * @hw: Pointer to the hardware clock structure.
+ * @parent_rate: The parent rate (should be rate of clk_xin).
+ *
+ * Return the current actual rate of the sampling clock. This can be used
+ * to communicate with out PHY.
+ *
+ * Return: The sample clock rate.
+ */
+static unsigned long sdhci_arasan_sampleclk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sdhci_arasan_clk_data *clk_data =
+ container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+ struct sdhci_arasan_data *sdhci_arasan =
+ container_of(clk_data, struct sdhci_arasan_data, clk_data);
+ struct sdhci_host *host = sdhci_arasan->host;
+
+ return host->mmc->actual_clock;
+}
+
+static const struct clk_ops arasan_sampleclk_ops = {
+ .recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+};
+
+/**
+ * sdhci_zynqmp_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * @hw: Pointer to the hardware clock structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct sdhci_arasan_clk_data *clk_data =
+ container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
+ struct sdhci_arasan_data *sdhci_arasan =
+ container_of(clk_data, struct sdhci_arasan_data, clk_data);
+ struct sdhci_host *host = sdhci_arasan->host;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1;
+ u8 tap_delay, tap_max = 0;
+ int ret;
+
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ switch (host->timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 30 Taps are available */
+ tap_max = 30;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 15 Taps are available */
+ tap_max = 15;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 8 Taps are available */
+ tap_max = 8;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ /* Set the Clock Phase */
+ ret = zynqmp_pm_set_sd_tapdelay(node_id, PM_TAPDELAY_OUTPUT, tap_delay);
+ if (ret)
+ pr_err("Error setting Output Tap Delay\n");
+
+ /* Release DLL Reset */
+ zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_RELEASE);
+
+ return ret;
+}
+
+static const struct clk_ops zynqmp_sdcardclk_ops = {
+ .recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
+ .set_phase = sdhci_zynqmp_sdcardclk_set_phase,
+};
+
+/**
+ * sdhci_zynqmp_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * @hw: Pointer to the hardware clock structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct sdhci_arasan_clk_data *clk_data =
+ container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+ struct sdhci_arasan_data *sdhci_arasan =
+ container_of(clk_data, struct sdhci_arasan_data, clk_data);
+ struct sdhci_host *host = sdhci_arasan->host;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 node_id = !strcmp(clk_name, "clk_in_sd0") ? NODE_SD_0 : NODE_SD_1;
+ u8 tap_delay, tap_max = 0;
+ int ret;
+
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ /* Assert DLL Reset */
+ zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_ASSERT);
+
+ switch (host->timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 120 Taps are available */
+ tap_max = 120;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 60 Taps are available */
+ tap_max = 60;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 30 Taps are available */
+ tap_max = 30;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ /* Set the Clock Phase */
+ ret = zynqmp_pm_set_sd_tapdelay(node_id, PM_TAPDELAY_INPUT, tap_delay);
+ if (ret)
+ pr_err("Error setting Input Tap Delay\n");
+
+ return ret;
+}
+
+static const struct clk_ops zynqmp_sampleclk_ops = {
+ .recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+ .set_phase = sdhci_zynqmp_sampleclk_set_phase,
+};
+
+/**
+ * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * @hw: Pointer to the hardware clock structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct sdhci_arasan_clk_data *clk_data =
+ container_of(hw, struct sdhci_arasan_clk_data, sdcardclk_hw);
+ struct sdhci_arasan_data *sdhci_arasan =
+ container_of(clk_data, struct sdhci_arasan_data, clk_data);
+ struct sdhci_host *host = sdhci_arasan->host;
+ u8 tap_delay, tap_max = 0;
+
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ switch (host->timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 30 Taps are available */
+ tap_max = 30;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 15 Taps are available */
+ tap_max = 15;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 8 Taps are available */
+ tap_max = 8;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ /* Set the Clock Phase */
+ if (tap_delay) {
+ u32 regval;
+
+ regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
+ regval |= SDHCI_OTAPDLY_ENABLE;
+ sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+ regval &= ~SDHCI_ARASAN_OTAPDLY_SEL_MASK;
+ regval |= tap_delay;
+ sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+ }
+
+ return 0;
+}
+
+static const struct clk_ops versal_sdcardclk_ops = {
+ .recalc_rate = sdhci_arasan_sdcardclk_recalc_rate,
+ .set_phase = sdhci_versal_sdcardclk_set_phase,
+};
+
+/**
+ * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * @hw: Pointer to the hardware clock structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees)
+{
+ struct sdhci_arasan_clk_data *clk_data =
+ container_of(hw, struct sdhci_arasan_clk_data, sampleclk_hw);
+ struct sdhci_arasan_data *sdhci_arasan =
+ container_of(clk_data, struct sdhci_arasan_data, clk_data);
+ struct sdhci_host *host = sdhci_arasan->host;
+ u8 tap_delay, tap_max = 0;
+
+ /* This is applicable for SDHCI_SPEC_300 and above */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ switch (host->timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 120 Taps are available */
+ tap_max = 120;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 60 Taps are available */
+ tap_max = 60;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 30 Taps are available */
+ tap_max = 30;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ /* Set the Clock Phase */
+ if (tap_delay) {
+ u32 regval;
+
+ regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval |= SDHCI_ITAPDLY_CHGWIN;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval |= SDHCI_ITAPDLY_ENABLE;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval &= ~SDHCI_ARASAN_ITAPDLY_SEL_MASK;
+ regval |= tap_delay;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval &= ~SDHCI_ITAPDLY_CHGWIN;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ }
+
+ return 0;
+}
+
+static const struct clk_ops versal_sampleclk_ops = {
+ .recalc_rate = sdhci_arasan_sampleclk_recalc_rate,
+ .set_phase = sdhci_versal_sampleclk_set_phase,
+};
+
+static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u32 deviceid)
+{
+ u16 clk;
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Issue DLL Reset */
+ zynqmp_pm_sd_dll_reset(deviceid, PM_DLL_RESET_PULSE);
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+ sdhci_enable_clk(host, clk);
+}
+
+static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ struct clk_hw *hw = &sdhci_arasan->clk_data.sdcardclk_hw;
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 device_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 :
+ NODE_SD_1;
+ int err;
+
+ arasan_zynqmp_dll_reset(host, device_id);
+
+ err = sdhci_execute_tuning(mmc, opcode);
+ if (err)
+ return err;
+
+ arasan_zynqmp_dll_reset(host, device_id);
+
+ return 0;
+}
+
+/**
* sdhci_arasan_update_clockmultiplier - Set corecfg_clockmultiplier
*
+ * @host: The sdhci_host
+ * @value: The value to write
+ *
* The corecfg_clockmultiplier is supposed to contain clock multiplier
* value of programmable clock generator.
*
@@ -557,8 +930,6 @@
* - The value of corecfg_clockmultiplier should sync with that of corresponding
* value reading from sdhci_capability_register. So this function is called
* once at probe time and never called again.
- *
- * @host: The sdhci_host
*/
static void sdhci_arasan_update_clockmultiplier(struct sdhci_host *host,
u32 value)
@@ -585,6 +956,8 @@
/**
* sdhci_arasan_update_baseclkfreq - Set corecfg_baseclkfreq
*
+ * @host: The sdhci_host
+ *
* The corecfg_baseclkfreq is supposed to contain the MHz of clk_xin. This
* function can be used to make that happen.
*
@@ -596,8 +969,6 @@
* - It's assumed that clk_xin is not dynamic and that we use the SDHCI divider
* to achieve lower clock rates. That means that this function is called once
* at probe time and never called again.
- *
- * @host: The sdhci_host
*/
static void sdhci_arasan_update_baseclkfreq(struct sdhci_host *host)
{
@@ -621,8 +992,457 @@
sdhci_arasan_syscon_write(host, &soc_ctl_map->baseclkfreq, mhz);
}
+static void sdhci_arasan_set_clk_delays(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
+
+ clk_set_phase(clk_data->sampleclk,
+ clk_data->clk_phase_in[host->timing]);
+ clk_set_phase(clk_data->sdcardclk,
+ clk_data->clk_phase_out[host->timing]);
+}
+
+static void arasan_dt_read_clk_phase(struct device *dev,
+ struct sdhci_arasan_clk_data *clk_data,
+ unsigned int timing, const char *prop)
+{
+ struct device_node *np = dev->of_node;
+
+ int clk_phase[2] = {0};
+
+ /*
+ * Read Tap Delay values from DT, if the DT does not contain the
+ * Tap Values then use the pre-defined values.
+ */
+ if (of_property_read_variable_u32_array(np, prop, &clk_phase[0],
+ 2, 0)) {
+ dev_dbg(dev, "Using predefined clock phase for %s = %d %d\n",
+ prop, clk_data->clk_phase_in[timing],
+ clk_data->clk_phase_out[timing]);
+ return;
+ }
+
+ /* The values read are Input and Output Clock Delays in order */
+ clk_data->clk_phase_in[timing] = clk_phase[0];
+ clk_data->clk_phase_out[timing] = clk_phase[1];
+}
+
/**
- * sdhci_arasan_register_sdclk - Register the sdclk for a PHY to use
+ * arasan_dt_parse_clk_phases - Read Clock Delay values from DT
+ *
+ * @dev: Pointer to our struct device.
+ * @clk_data: Pointer to the Clock Data structure
+ *
+ * Called at initialization to parse the values of Clock Delays.
+ */
+static void arasan_dt_parse_clk_phases(struct device *dev,
+ struct sdhci_arasan_clk_data *clk_data)
+{
+ u32 mio_bank = 0;
+ int i;
+
+ /*
+ * This has been kept as a pointer and is assigned a function here.
+ * So that different controller variants can assign their own handling
+ * function.
+ */
+ clk_data->set_clk_delays = sdhci_arasan_set_clk_delays;
+
+ if (of_device_is_compatible(dev->of_node, "xlnx,zynqmp-8.9a")) {
+ u32 zynqmp_iclk_phase[MMC_TIMING_MMC_HS400 + 1] =
+ ZYNQMP_ICLK_PHASE;
+ u32 zynqmp_oclk_phase[MMC_TIMING_MMC_HS400 + 1] =
+ ZYNQMP_OCLK_PHASE;
+
+ of_property_read_u32(dev->of_node, "xlnx,mio-bank", &mio_bank);
+ if (mio_bank == 2) {
+ zynqmp_oclk_phase[MMC_TIMING_UHS_SDR104] = 90;
+ zynqmp_oclk_phase[MMC_TIMING_MMC_HS200] = 90;
+ }
+
+ for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
+ clk_data->clk_phase_in[i] = zynqmp_iclk_phase[i];
+ clk_data->clk_phase_out[i] = zynqmp_oclk_phase[i];
+ }
+ }
+
+ if (of_device_is_compatible(dev->of_node, "xlnx,versal-8.9a")) {
+ u32 versal_iclk_phase[MMC_TIMING_MMC_HS400 + 1] =
+ VERSAL_ICLK_PHASE;
+ u32 versal_oclk_phase[MMC_TIMING_MMC_HS400 + 1] =
+ VERSAL_OCLK_PHASE;
+
+ for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
+ clk_data->clk_phase_in[i] = versal_iclk_phase[i];
+ clk_data->clk_phase_out[i] = versal_oclk_phase[i];
+ }
+ }
+
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_LEGACY,
+ "clk-phase-legacy");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS,
+ "clk-phase-mmc-hs");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_SD_HS,
+ "clk-phase-sd-hs");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR12,
+ "clk-phase-uhs-sdr12");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR25,
+ "clk-phase-uhs-sdr25");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR50,
+ "clk-phase-uhs-sdr50");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_SDR104,
+ "clk-phase-uhs-sdr104");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_UHS_DDR50,
+ "clk-phase-uhs-ddr50");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_DDR52,
+ "clk-phase-mmc-ddr52");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS200,
+ "clk-phase-mmc-hs200");
+ arasan_dt_read_clk_phase(dev, clk_data, MMC_TIMING_MMC_HS400,
+ "clk-phase-mmc-hs400");
+}
+
+static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
+ .ops = &sdhci_arasan_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops arasan_clk_ops = {
+ .sdcardclk_ops = &arasan_sdcardclk_ops,
+ .sampleclk_ops = &arasan_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_generic_data = {
+ .pdata = &sdhci_arasan_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_keembay_emmc_pdata = {
+ .ops = &sdhci_arasan_cqe_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED |
+ SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE |
+ SDHCI_QUIRK_32BIT_ADMA_SIZE,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 |
+ SDHCI_QUIRK2_STOP_WITH_TC |
+ SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+};
+
+static const struct sdhci_pltfm_data sdhci_keembay_sd_pdata = {
+ .ops = &sdhci_arasan_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED |
+ SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE |
+ SDHCI_QUIRK_32BIT_ADMA_SIZE,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
+ SDHCI_QUIRK2_STOP_WITH_TC |
+ SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+};
+
+static const struct sdhci_pltfm_data sdhci_keembay_sdio_pdata = {
+ .ops = &sdhci_arasan_ops,
+ .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_LED |
+ SDHCI_QUIRK_32BIT_DMA_ADDR |
+ SDHCI_QUIRK_32BIT_DMA_SIZE |
+ SDHCI_QUIRK_32BIT_ADMA_SIZE,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_HOST_OFF_CARD_ON |
+ SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
+ .soc_ctl_map = &rk3399_soc_ctl_map,
+ .pdata = &sdhci_arasan_cqe_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_emmc_data = {
+ .soc_ctl_map = &intel_lgm_emmc_soc_ctl_map,
+ .pdata = &sdhci_arasan_cqe_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_lgm_sdxc_data = {
+ .soc_ctl_map = &intel_lgm_sdxc_soc_ctl_map,
+ .pdata = &sdhci_arasan_cqe_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static const struct sdhci_pltfm_data sdhci_arasan_zynqmp_pdata = {
+ .ops = &sdhci_arasan_ops,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_STOP_WITH_TC,
+};
+
+static const struct sdhci_arasan_clk_ops zynqmp_clk_ops = {
+ .sdcardclk_ops = &zynqmp_sdcardclk_ops,
+ .sampleclk_ops = &zynqmp_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_zynqmp_data = {
+ .pdata = &sdhci_arasan_zynqmp_pdata,
+ .clk_ops = &zynqmp_clk_ops,
+};
+
+static const struct sdhci_arasan_clk_ops versal_clk_ops = {
+ .sdcardclk_ops = &versal_sdcardclk_ops,
+ .sampleclk_ops = &versal_sampleclk_ops,
+};
+
+static struct sdhci_arasan_of_data sdhci_arasan_versal_data = {
+ .pdata = &sdhci_arasan_zynqmp_pdata,
+ .clk_ops = &versal_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_keembay_emmc_data = {
+ .soc_ctl_map = &intel_keembay_soc_ctl_map,
+ .pdata = &sdhci_keembay_emmc_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_keembay_sd_data = {
+ .soc_ctl_map = &intel_keembay_soc_ctl_map,
+ .pdata = &sdhci_keembay_sd_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static struct sdhci_arasan_of_data intel_keembay_sdio_data = {
+ .soc_ctl_map = &intel_keembay_soc_ctl_map,
+ .pdata = &sdhci_keembay_sdio_pdata,
+ .clk_ops = &arasan_clk_ops,
+};
+
+static const struct of_device_id sdhci_arasan_of_match[] = {
+ /* SoC-specific compatible strings w/ soc_ctl_map */
+ {
+ .compatible = "rockchip,rk3399-sdhci-5.1",
+ .data = &sdhci_arasan_rk3399_data,
+ },
+ {
+ .compatible = "intel,lgm-sdhci-5.1-emmc",
+ .data = &intel_lgm_emmc_data,
+ },
+ {
+ .compatible = "intel,lgm-sdhci-5.1-sdxc",
+ .data = &intel_lgm_sdxc_data,
+ },
+ {
+ .compatible = "intel,keembay-sdhci-5.1-emmc",
+ .data = &intel_keembay_emmc_data,
+ },
+ {
+ .compatible = "intel,keembay-sdhci-5.1-sd",
+ .data = &intel_keembay_sd_data,
+ },
+ {
+ .compatible = "intel,keembay-sdhci-5.1-sdio",
+ .data = &intel_keembay_sdio_data,
+ },
+ /* Generic compatible below here */
+ {
+ .compatible = "arasan,sdhci-8.9a",
+ .data = &sdhci_arasan_generic_data,
+ },
+ {
+ .compatible = "arasan,sdhci-5.1",
+ .data = &sdhci_arasan_generic_data,
+ },
+ {
+ .compatible = "arasan,sdhci-4.9a",
+ .data = &sdhci_arasan_generic_data,
+ },
+ {
+ .compatible = "xlnx,zynqmp-8.9a",
+ .data = &sdhci_arasan_zynqmp_data,
+ },
+ {
+ .compatible = "xlnx,versal-8.9a",
+ .data = &sdhci_arasan_versal_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
+
+/**
+ * sdhci_arasan_register_sdcardclk - Register the sdcardclk for a PHY to use
+ *
+ * @sdhci_arasan: Our private data structure.
+ * @clk_xin: Pointer to the functional clock
+ * @dev: Pointer to our struct device.
+ *
+ * Some PHY devices need to know what the actual card clock is. In order for
+ * them to find out, we'll provide a clock through the common clock framework
+ * for them to query.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int
+sdhci_arasan_register_sdcardclk(struct sdhci_arasan_data *sdhci_arasan,
+ struct clk *clk_xin,
+ struct device *dev)
+{
+ struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data sdcardclk_init;
+ const char *parent_clk_name;
+ int ret;
+
+ ret = of_property_read_string_index(np, "clock-output-names", 0,
+ &sdcardclk_init.name);
+ if (ret) {
+ dev_err(dev, "DT has #clock-cells but no clock-output-names\n");
+ return ret;
+ }
+
+ parent_clk_name = __clk_get_name(clk_xin);
+ sdcardclk_init.parent_names = &parent_clk_name;
+ sdcardclk_init.num_parents = 1;
+ sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
+ sdcardclk_init.ops = sdhci_arasan->clk_ops->sdcardclk_ops;
+
+ clk_data->sdcardclk_hw.init = &sdcardclk_init;
+ clk_data->sdcardclk =
+ devm_clk_register(dev, &clk_data->sdcardclk_hw);
+ if (IS_ERR(clk_data->sdcardclk))
+ return PTR_ERR(clk_data->sdcardclk);
+ clk_data->sdcardclk_hw.init = NULL;
+
+ ret = of_clk_add_provider(np, of_clk_src_simple_get,
+ clk_data->sdcardclk);
+ if (ret)
+ dev_err(dev, "Failed to add sdcard clock provider\n");
+
+ return ret;
+}
+
+/**
+ * sdhci_arasan_register_sampleclk - Register the sampleclk for a PHY to use
+ *
+ * @sdhci_arasan: Our private data structure.
+ * @clk_xin: Pointer to the functional clock
+ * @dev: Pointer to our struct device.
+ *
+ * Some PHY devices need to know what the actual card clock is. In order for
+ * them to find out, we'll provide a clock through the common clock framework
+ * for them to query.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int
+sdhci_arasan_register_sampleclk(struct sdhci_arasan_data *sdhci_arasan,
+ struct clk *clk_xin,
+ struct device *dev)
+{
+ struct sdhci_arasan_clk_data *clk_data = &sdhci_arasan->clk_data;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data sampleclk_init;
+ const char *parent_clk_name;
+ int ret;
+
+ ret = of_property_read_string_index(np, "clock-output-names", 1,
+ &sampleclk_init.name);
+ if (ret) {
+ dev_err(dev, "DT has #clock-cells but no clock-output-names\n");
+ return ret;
+ }
+
+ parent_clk_name = __clk_get_name(clk_xin);
+ sampleclk_init.parent_names = &parent_clk_name;
+ sampleclk_init.num_parents = 1;
+ sampleclk_init.flags = CLK_GET_RATE_NOCACHE;
+ sampleclk_init.ops = sdhci_arasan->clk_ops->sampleclk_ops;
+
+ clk_data->sampleclk_hw.init = &sampleclk_init;
+ clk_data->sampleclk =
+ devm_clk_register(dev, &clk_data->sampleclk_hw);
+ if (IS_ERR(clk_data->sampleclk))
+ return PTR_ERR(clk_data->sampleclk);
+ clk_data->sampleclk_hw.init = NULL;
+
+ ret = of_clk_add_provider(np, of_clk_src_simple_get,
+ clk_data->sampleclk);
+ if (ret)
+ dev_err(dev, "Failed to add sample clock provider\n");
+
+ return ret;
+}
+
+/**
+ * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk()
+ *
+ * @dev: Pointer to our struct device.
+ *
+ * Should be called any time we're exiting and sdhci_arasan_register_sdclk()
+ * returned success.
+ */
+static void sdhci_arasan_unregister_sdclk(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+
+ if (!of_find_property(np, "#clock-cells", NULL))
+ return;
+
+ of_clk_del_provider(dev->of_node);
+}
+
+/**
+ * sdhci_arasan_update_support64b - Set SUPPORT_64B (64-bit System Bus Support)
+ *
+ * This should be set based on the System Address Bus.
+ * 0: the Core supports only 32-bit System Address Bus.
+ * 1: the Core supports 64-bit System Address Bus.
+ *
+ * NOTES:
+ * - For Keem Bay, it is required to clear this bit. Its default value is 1'b1.
+ * Keem Bay does not support 64-bit access.
+ *
+ * @host: The sdhci_host
+ * @value: The value to write
+ */
+static void sdhci_arasan_update_support64b(struct sdhci_host *host, u32 value)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+ const struct sdhci_arasan_soc_ctl_map *soc_ctl_map =
+ sdhci_arasan->soc_ctl_map;
+
+ /* Having a map is optional */
+ if (!soc_ctl_map)
+ return;
+
+ /* If we have a map, we expect to have a syscon */
+ if (!sdhci_arasan->soc_ctl_base) {
+ pr_warn("%s: Have regmap, but no soc-ctl-syscon\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+
+ sdhci_arasan_syscon_write(host, &soc_ctl_map->support64b, value);
+}
+
+/**
+ * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
+ *
+ * @sdhci_arasan: Our private data structure.
+ * @clk_xin: Pointer to the functional clock
+ * @dev: Pointer to our struct device.
*
* Some PHY devices need to know what the actual card clock is. In order for
* them to find out, we'll provide a clock through the common clock framework
@@ -636,66 +1456,34 @@
* to create nice clean device tree bindings and later (if needed) we can try
* re-architecting SDHCI if we see some benefit to it.
*
- * @sdhci_arasan: Our private data structure.
- * @clk_xin: Pointer to the functional clock
- * @dev: Pointer to our struct device.
- * Returns 0 on success and error value on error
+ * Return: 0 on success and error value on error
*/
static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
struct clk *clk_xin,
struct device *dev)
{
struct device_node *np = dev->of_node;
- struct clk_init_data sdcardclk_init;
- const char *parent_clk_name;
+ u32 num_clks = 0;
int ret;
/* Providing a clock to the PHY is optional; no error if missing */
- if (!of_find_property(np, "#clock-cells", NULL))
+ if (of_property_read_u32(np, "#clock-cells", &num_clks) < 0)
return 0;
- ret = of_property_read_string_index(np, "clock-output-names", 0,
- &sdcardclk_init.name);
- if (ret) {
- dev_err(dev, "DT has #clock-cells but no clock-output-names\n");
+ ret = sdhci_arasan_register_sdcardclk(sdhci_arasan, clk_xin, dev);
+ if (ret)
return ret;
+
+ if (num_clks) {
+ ret = sdhci_arasan_register_sampleclk(sdhci_arasan, clk_xin,
+ dev);
+ if (ret) {
+ sdhci_arasan_unregister_sdclk(dev);
+ return ret;
+ }
}
- parent_clk_name = __clk_get_name(clk_xin);
- sdcardclk_init.parent_names = &parent_clk_name;
- sdcardclk_init.num_parents = 1;
- sdcardclk_init.flags = CLK_GET_RATE_NOCACHE;
- sdcardclk_init.ops = &arasan_sdcardclk_ops;
-
- sdhci_arasan->sdcardclk_hw.init = &sdcardclk_init;
- sdhci_arasan->sdcardclk =
- devm_clk_register(dev, &sdhci_arasan->sdcardclk_hw);
- sdhci_arasan->sdcardclk_hw.init = NULL;
-
- ret = of_clk_add_provider(np, of_clk_src_simple_get,
- sdhci_arasan->sdcardclk);
- if (ret)
- dev_err(dev, "Failed to add clock provider\n");
-
- return ret;
-}
-
-/**
- * sdhci_arasan_unregister_sdclk - Undoes sdhci_arasan_register_sdclk()
- *
- * Should be called any time we're exiting and sdhci_arasan_register_sdclk()
- * returned success.
- *
- * @dev: Pointer to our struct device.
- */
-static void sdhci_arasan_unregister_sdclk(struct device *dev)
-{
- struct device_node *np = dev->of_node;
-
- if (!of_find_property(np, "#clock-cells", NULL))
- return;
-
- of_clk_del_provider(dev->of_node);
+ return 0;
}
static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
@@ -765,6 +1553,7 @@
sdhci_arasan->host = host;
sdhci_arasan->soc_ctl_map = data->soc_ctl_map;
+ sdhci_arasan->clk_ops = data->clk_ops;
node = of_parse_phandle(pdev->dev.of_node, "arasan,soc-ctl-syscon", 0);
if (node) {
@@ -772,10 +1561,9 @@
of_node_put(node);
if (IS_ERR(sdhci_arasan->soc_ctl_base)) {
- ret = PTR_ERR(sdhci_arasan->soc_ctl_base);
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev, "Can't get syscon: %d\n",
- ret);
+ ret = dev_err_probe(&pdev->dev,
+ PTR_ERR(sdhci_arasan->soc_ctl_base),
+ "Can't get syscon\n");
goto err_pltfm_free;
}
}
@@ -820,12 +1608,30 @@
"rockchip,rk3399-sdhci-5.1"))
sdhci_arasan_update_clockmultiplier(host, 0x0);
+ if (of_device_is_compatible(np, "intel,keembay-sdhci-5.1-emmc") ||
+ of_device_is_compatible(np, "intel,keembay-sdhci-5.1-sd") ||
+ of_device_is_compatible(np, "intel,keembay-sdhci-5.1-sdio")) {
+ sdhci_arasan_update_clockmultiplier(host, 0x0);
+ sdhci_arasan_update_support64b(host, 0x0);
+
+ host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+ }
+
sdhci_arasan_update_baseclkfreq(host);
ret = sdhci_arasan_register_sdclk(sdhci_arasan, clk_xin, &pdev->dev);
if (ret)
goto clk_disable_all;
+ if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
+ host->mmc_host_ops.execute_tuning =
+ arasan_zynqmp_execute_tuning;
+
+ sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN;
+ }
+
+ arasan_dt_parse_clk_phases(&pdev->dev, &sdhci_arasan->clk_data);
+
ret = mmc_of_parse(host->mmc);
if (ret) {
if (ret != -EPROBE_DEFER)
@@ -907,6 +1713,7 @@
static struct platform_driver sdhci_arasan_driver = {
.driver = {
.name = "sdhci-arasan",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_arasan_of_match,
.pm = &sdhci_arasan_dev_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 47ddded..4f008ba 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -111,7 +111,19 @@
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
+static u32 aspeed_sdhci_readl(struct sdhci_host *host, int reg)
+{
+ u32 val = readl(host->ioaddr + reg);
+
+ if (unlikely(reg == SDHCI_PRESENT_STATE) &&
+ (host->mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH))
+ val ^= SDHCI_CARD_PRESENT;
+
+ return val;
+}
+
static const struct sdhci_ops aspeed_sdhci_ops = {
+ .read_l = aspeed_sdhci_readl,
.set_clock = aspeed_sdhci_set_clock,
.get_max_clock = aspeed_sdhci_get_max_clock,
.set_bus_width = aspeed_sdhci_set_bus_width,
@@ -228,6 +240,7 @@
static struct platform_driver aspeed_sdhci_driver = {
.driver = {
.name = "sdhci-aspeed",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = aspeed_sdhci_of_match,
},
.probe = aspeed_sdhci_probe,
@@ -306,6 +319,7 @@
static struct platform_driver aspeed_sdc_driver = {
.driver = {
.name = "sd-controller-aspeed",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_pltfm_pmops,
.of_match_table = aspeed_sdc_of_match,
},
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 881f813..d1a1c54 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -6,10 +6,12 @@
* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
@@ -27,14 +29,25 @@
#define SDMMC_CACR 0x230
#define SDMMC_CACR_CAPWREN BIT(0)
#define SDMMC_CACR_KEY (0x46 << 8)
+#define SDMMC_CALCR 0x240
+#define SDMMC_CALCR_EN BIT(0)
+#define SDMMC_CALCR_ALWYSON BIT(4)
#define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */
+struct sdhci_at91_soc_data {
+ const struct sdhci_pltfm_data *pdata;
+ bool baseclk_is_generated_internally;
+ unsigned int divider_for_baseclk;
+};
+
struct sdhci_at91_priv {
+ const struct sdhci_at91_soc_data *soc_data;
struct clk *hclock;
struct clk *gck;
struct clk *mainck;
bool restore_needed;
+ bool cal_always_on;
};
static void sdhci_at91_set_force_card_detect(struct sdhci_host *host)
@@ -49,7 +62,6 @@
static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
{
u16 clk;
- unsigned long timeout;
host->mmc->actual_clock = 0;
@@ -74,38 +86,17 @@
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
/* Wait max 20 ms */
- timeout = 20;
- while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
- & SDHCI_CLOCK_INT_STABLE)) {
- if (timeout == 0) {
- pr_err("%s: Internal clock never stabilised.\n",
- mmc_hostname(host->mmc));
- return;
- }
- timeout--;
- mdelay(1);
+ if (read_poll_timeout(sdhci_readw, clk, (clk & SDHCI_CLOCK_INT_STABLE),
+ 1000, 20000, false, host, SDHCI_CLOCK_CONTROL)) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ return;
}
clk |= SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
}
-/*
- * In this specific implementation of the SDHCI controller, the power register
- * needs to have a valid voltage set even when the power supply is managed by
- * an external regulator.
- */
-static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
-{
- if (!IS_ERR(host->mmc->supply.vmmc)) {
- struct mmc_host *mmc = host->mmc;
-
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
- }
- sdhci_set_power_noreg(host, mode, vdd);
-}
-
static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
unsigned int timing)
{
@@ -116,11 +107,26 @@
static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ unsigned int tmp;
+
sdhci_reset(host, mask);
if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
|| mmc_gpio_get_cd(host->mmc) >= 0)
sdhci_at91_set_force_card_detect(host);
+
+ if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) {
+ u32 calcr = sdhci_readl(host, SDMMC_CALCR);
+
+ sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
+ SDMMC_CALCR);
+
+ if (read_poll_timeout(sdhci_readl, tmp, !(tmp & SDMMC_CALCR_EN),
+ 10, 20000, false, host, SDMMC_CALCR))
+ dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");
+ }
}
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
@@ -128,15 +134,27 @@
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_at91_reset,
.set_uhs_signaling = sdhci_at91_set_uhs_signaling,
- .set_power = sdhci_at91_set_power,
+ .set_power = sdhci_set_power_and_bus_voltage,
};
-static const struct sdhci_pltfm_data soc_data_sama5d2 = {
+static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = {
.ops = &sdhci_at91_sama5d2_ops,
};
+static const struct sdhci_at91_soc_data soc_data_sama5d2 = {
+ .pdata = &sdhci_sama5d2_pdata,
+ .baseclk_is_generated_internally = false,
+};
+
+static const struct sdhci_at91_soc_data soc_data_sam9x60 = {
+ .pdata = &sdhci_sama5d2_pdata,
+ .baseclk_is_generated_internally = true,
+ .divider_for_baseclk = 2,
+};
+
static const struct of_device_id sdhci_at91_dt_match[] = {
{ .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
+ { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 },
{}
};
MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match);
@@ -146,50 +164,37 @@
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
- int ret;
unsigned int caps0, caps1;
unsigned int clk_base, clk_mul;
- unsigned int gck_rate, real_gck_rate;
+ unsigned int gck_rate, clk_base_rate;
unsigned int preset_div;
- /*
- * The mult clock is provided by as a generated clock by the PMC
- * controller. In order to set the rate of gck, we have to get the
- * base clock rate and the clock mult from capabilities.
- */
clk_prepare_enable(priv->hclock);
caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
- clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
- clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
- gck_rate = clk_base * 1000000 * (clk_mul + 1);
- ret = clk_set_rate(priv->gck, gck_rate);
- if (ret < 0) {
- dev_err(dev, "failed to set gck");
- clk_disable_unprepare(priv->hclock);
- return ret;
- }
- /*
- * We need to check if we have the requested rate for gck because in
- * some cases this rate could be not supported. If it happens, the rate
- * is the closest one gck can provide. We have to update the value
- * of clk mul.
- */
- real_gck_rate = clk_get_rate(priv->gck);
- if (real_gck_rate != gck_rate) {
- clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
- caps1 &= (~SDHCI_CLOCK_MUL_MASK);
- caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) &
- SDHCI_CLOCK_MUL_MASK);
- /* Set capabilities in r/w mode. */
- writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN,
- host->ioaddr + SDMMC_CACR);
- writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
- /* Set capabilities in ro mode. */
- writel(0, host->ioaddr + SDMMC_CACR);
- dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n",
- clk_mul, real_gck_rate);
- }
+
+ gck_rate = clk_get_rate(priv->gck);
+ if (priv->soc_data->baseclk_is_generated_internally)
+ clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk;
+ else
+ clk_base_rate = clk_get_rate(priv->mainck);
+
+ clk_base = clk_base_rate / 1000000;
+ clk_mul = gck_rate / clk_base_rate - 1;
+
+ caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK;
+ caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base);
+ caps1 &= ~SDHCI_CLOCK_MUL_MASK;
+ caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul);
+ /* Set capabilities in r/w mode. */
+ writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
+ writel(caps0, host->ioaddr + SDHCI_CAPABILITIES);
+ writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
+ /* Set capabilities in ro mode. */
+ writel(0, host->ioaddr + SDMMC_CACR);
+
+ dev_dbg(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n",
+ clk_mul, gck_rate, clk_base_rate);
/*
* We have to set preset values because it depends on the clk_mul
@@ -197,19 +202,19 @@
* maximum sd clock value is 120 MHz instead of 208 MHz. For that
* reason, we need to use presets to support SDR104.
*/
- preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
+ preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1;
writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
host->ioaddr + SDHCI_PRESET_FOR_SDR12);
- preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+ preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1;
writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
host->ioaddr + SDHCI_PRESET_FOR_SDR25);
- preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
+ preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1;
writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
host->ioaddr + SDHCI_PRESET_FOR_SDR50);
- preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
+ preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1;
writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
host->ioaddr + SDHCI_PRESET_FOR_SDR104);
- preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+ preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1;
writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
host->ioaddr + SDHCI_PRESET_FOR_DDR50);
@@ -304,7 +309,7 @@
static int sdhci_at91_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
- const struct sdhci_pltfm_data *soc_data;
+ const struct sdhci_at91_soc_data *soc_data;
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_at91_priv *priv;
@@ -315,18 +320,23 @@
return -EINVAL;
soc_data = match->data;
- host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv));
+ host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv));
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
priv = sdhci_pltfm_priv(pltfm_host);
+ priv->soc_data = soc_data;
priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
if (IS_ERR(priv->mainck)) {
- dev_err(&pdev->dev, "failed to get baseclk\n");
- ret = PTR_ERR(priv->mainck);
- goto sdhci_pltfm_free;
+ if (soc_data->baseclk_is_generated_internally) {
+ priv->mainck = NULL;
+ } else {
+ dev_err(&pdev->dev, "failed to get baseclk\n");
+ ret = PTR_ERR(priv->mainck);
+ goto sdhci_pltfm_free;
+ }
}
priv->hclock = devm_clk_get(&pdev->dev, "hclock");
@@ -349,6 +359,14 @@
priv->restore_needed = false;
+ /*
+ * if SDCAL pin is wrongly connected, we must enable
+ * the analog calibration cell permanently.
+ */
+ priv->cal_always_on =
+ device_property_read_bool(&pdev->dev,
+ "microchip,sdcal-inverted");
+
ret = mmc_of_parse(host->mmc);
if (ret)
goto clocks_disable_unprepare;
@@ -447,6 +465,7 @@
static struct platform_driver sdhci_at91_driver = {
.driver = {
.name = "sdhci-at91",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_at91_dt_match,
.pm = &sdhci_at91_dev_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 6793fb8..59d8d96 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -16,6 +16,11 @@
#include "sdhci-pltfm.h"
+#define SDHCI_DWCMSHC_ARG2_STUFF GENMASK(31, 16)
+
+/* DWCMSHC specific Mode Select value */
+#define DWCMSHC_CTRL_HS400 0x7
+
#define BOUNDARY_OK(addr, len) \
((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
@@ -46,10 +51,59 @@
sdhci_adma_write_desc(host, desc, addr, len, cmd);
}
+static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ /*
+ * No matter V4 is enabled or not, ARGUMENT2 register is 32-bit
+ * block count register which doesn't support stuff bits of
+ * CMD23 argument on dwcmsch host controller.
+ */
+ if (mrq->sbc && (mrq->sbc->arg & SDHCI_DWCMSHC_ARG2_STUFF))
+ host->flags &= ~SDHCI_AUTO_CMD23;
+ else
+ host->flags |= SDHCI_AUTO_CMD23;
+}
+
+static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ dwcmshc_check_auto_cmd23(mmc, mrq);
+
+ sdhci_request(mmc, mrq);
+}
+
+static void dwcmshc_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if ((timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR104))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if ((timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_MMC_HS))
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= DWCMSHC_CTRL_HS400;
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
static const struct sdhci_ops sdhci_dwcmshc_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_uhs_signaling = dwcmshc_set_uhs_signaling,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.reset = sdhci_reset,
.adma_write_desc = dwcmshc_adma_write_desc,
@@ -105,6 +159,8 @@
sdhci_get_of_property(pdev);
+ host->mmc_host_ops.request = dwcmshc_request;
+
err = sdhci_add_host(host);
if (err)
goto err_clk;
@@ -135,6 +191,48 @@
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int dwcmshc_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ ret = sdhci_suspend_host(host);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(pltfm_host->clk);
+ if (!IS_ERR(priv->bus_clk))
+ clk_disable_unprepare(priv->bus_clk);
+
+ return ret;
+}
+
+static int dwcmshc_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret)
+ return ret;
+
+ if (!IS_ERR(priv->bus_clk)) {
+ ret = clk_prepare_enable(priv->bus_clk);
+ if (ret)
+ return ret;
+ }
+
+ return sdhci_resume_host(host);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dwcmshc_pmops, dwcmshc_suspend, dwcmshc_resume);
+
static const struct of_device_id sdhci_dwcmshc_dt_ids[] = {
{ .compatible = "snps,dwcmshc-sdhci" },
{}
@@ -144,7 +242,9 @@
static struct platform_driver sdhci_dwcmshc_driver = {
.driver = {
.name = "sdhci-dwcmshc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_dwcmshc_dt_ids,
+ .pm = &dwcmshc_pmops,
},
.probe = dwcmshc_probe,
.remove = dwcmshc_remove,
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 5922ae0..343648f 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -4,6 +4,7 @@
*
* Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright 2020 NXP
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
* Anton Vorontsov <avorontsov@ru.mvista.com>
@@ -19,6 +20,7 @@
#include <linux/clk.h>
#include <linux/ktime.h>
#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include "sdhci-pltfm.h"
@@ -174,6 +176,9 @@
u16 ret;
int shift = (spec_reg & 0x2) * 8;
+ if (spec_reg == SDHCI_TRANSFER_MODE)
+ return pltfm_host->xfer_mode_shadow;
+
if (spec_reg == SDHCI_HOST_VERSION)
ret = value & 0xffff;
else
@@ -519,12 +524,16 @@
static int esdhc_of_enable_dma(struct sdhci_host *host)
{
+ int ret;
u32 value;
struct device *dev = mmc_dev(host->mmc);
if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
- of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc"))
- dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+ of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) {
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+ if (ret)
+ return ret;
+ }
value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
@@ -563,32 +572,72 @@
static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
{
- u32 val;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
ktime_t timeout;
+ u32 val, clk_en;
+
+ clk_en = ESDHC_CLOCK_SDCLKEN;
+
+ /*
+ * IPGEN/HCKEN/PEREN bits exist on eSDHC whose vendor version
+ * is 2.2 or lower.
+ */
+ if (esdhc->vendor_ver <= VENDOR_V_22)
+ clk_en |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
+ ESDHC_CLOCK_PEREN);
val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
if (enable)
- val |= ESDHC_CLOCK_SDCLKEN;
+ val |= clk_en;
else
- val &= ~ESDHC_CLOCK_SDCLKEN;
+ val &= ~clk_en;
sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
- /* Wait max 20 ms */
+ /*
+ * Wait max 20 ms. If vendor version is 2.2 or lower, do not
+ * wait clock stable bit which does not exist.
+ */
timeout = ktime_add_ms(ktime_get(), 20);
- val = ESDHC_CLOCK_STABLE;
- while (1) {
+ while (esdhc->vendor_ver > VENDOR_V_22) {
bool timedout = ktime_after(ktime_get(), timeout);
- if (sdhci_readl(host, ESDHC_PRSSTAT) & val)
+ if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
break;
if (timedout) {
pr_err("%s: Internal clock never stabilised.\n",
mmc_hostname(host->mmc));
break;
}
- udelay(10);
+ usleep_range(10, 20);
+ }
+}
+
+static void esdhc_flush_async_fifo(struct sdhci_host *host)
+{
+ ktime_t timeout;
+ u32 val;
+
+ val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ val |= ESDHC_FLUSH_ASYNC_FIFO;
+ sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (!(sdhci_readl(host, ESDHC_DMA_SYSCTL) &
+ ESDHC_FLUSH_ASYNC_FIFO))
+ break;
+ if (timedout) {
+ pr_err("%s: flushing asynchronous FIFO timeout.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ usleep_range(10, 20);
}
}
@@ -596,77 +645,97 @@
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
- int pre_div = 1;
- int div = 1;
- int division;
+ unsigned int pre_div = 1, div = 1;
+ unsigned int clock_fixup = 0;
ktime_t timeout;
- long fixup = 0;
u32 temp;
- host->mmc->actual_clock = 0;
-
if (clock == 0) {
+ host->mmc->actual_clock = 0;
esdhc_clock_enable(host, false);
return;
}
- /* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
+ /* Start pre_div at 2 for vendor version < 2.3. */
if (esdhc->vendor_ver < VENDOR_V_23)
pre_div = 2;
+ /* Fix clock value. */
if (host->mmc->card && mmc_card_sd(host->mmc->card) &&
- esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
- fixup = esdhc->clk_fixup->sd_dflt_max_clk;
+ esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY)
+ clock_fixup = esdhc->clk_fixup->sd_dflt_max_clk;
else if (esdhc->clk_fixup)
- fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
+ clock_fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing];
- if (fixup && clock > fixup)
- clock = fixup;
+ if (clock_fixup == 0 || clock < clock_fixup)
+ clock_fixup = clock;
- temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
- temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
- ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);
- sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
-
- while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
+ /* Calculate pre_div and div. */
+ while (host->max_clk / pre_div / 16 > clock_fixup && pre_div < 256)
pre_div *= 2;
- while (host->max_clk / pre_div / div > clock && div < 16)
+ while (host->max_clk / pre_div / div > clock_fixup && div < 16)
div++;
+ esdhc->div_ratio = pre_div * div;
+
+ /* Limit clock division for HS400 200MHz clock for quirk. */
if (esdhc->quirk_limited_clk_division &&
clock == MMC_HS200_MAX_DTR &&
(host->mmc->ios.timing == MMC_TIMING_MMC_HS400 ||
host->flags & SDHCI_HS400_TUNING)) {
- division = pre_div * div;
- if (division <= 4) {
+ if (esdhc->div_ratio <= 4) {
pre_div = 4;
div = 1;
- } else if (division <= 8) {
+ } else if (esdhc->div_ratio <= 8) {
pre_div = 4;
div = 2;
- } else if (division <= 12) {
+ } else if (esdhc->div_ratio <= 12) {
pre_div = 4;
div = 3;
} else {
pr_warn("%s: using unsupported clock division.\n",
mmc_hostname(host->mmc));
}
+ esdhc->div_ratio = pre_div * div;
}
+ host->mmc->actual_clock = host->max_clk / esdhc->div_ratio;
+
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
- clock, host->max_clk / pre_div / div);
- host->mmc->actual_clock = host->max_clk / pre_div / div;
- esdhc->div_ratio = pre_div * div;
+ clock, host->mmc->actual_clock);
+
+ /* Set clock division into register. */
pre_div >>= 1;
div--;
+ esdhc_clock_enable(host, false);
+
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
- temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
- | (div << ESDHC_DIVIDER_SHIFT)
- | (pre_div << ESDHC_PREDIV_SHIFT));
+ temp &= ~ESDHC_CLOCK_MASK;
+ temp |= ((div << ESDHC_DIVIDER_SHIFT) |
+ (pre_div << ESDHC_PREDIV_SHIFT));
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ /*
+ * Wait max 20 ms. If vendor version is 2.2 or lower, do not
+ * wait clock stable bit which does not exist.
+ */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (esdhc->vendor_ver > VENDOR_V_22) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ usleep_range(10, 20);
+ }
+
+ /* Additional setting for HS400. */
if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
clock == MMC_HS200_MAX_DTR) {
temp = sdhci_readl(host, ESDHC_TBCTL);
@@ -680,33 +749,28 @@
if (host->mmc->actual_clock == MMC_HS200_MAX_DTR)
temp |= ESDHC_DLL_FREQ_SEL;
sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+ temp |= ESDHC_DLL_RESET;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+ udelay(1);
+ temp &= ~ESDHC_DLL_RESET;
+ sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+ /* Wait max 20 ms */
+ if (read_poll_timeout(sdhci_readl, temp,
+ temp & ESDHC_DLL_STS_SLV_LOCK,
+ 10, 20000, false,
+ host, ESDHC_DLLSTAT0))
+ pr_err("%s: timeout for delay chain lock.\n",
+ mmc_hostname(host->mmc));
+
temp = sdhci_readl(host, ESDHC_TBCTL);
sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
esdhc_clock_enable(host, false);
- temp = sdhci_readl(host, ESDHC_DMA_SYSCTL);
- temp |= ESDHC_FLUSH_ASYNC_FIFO;
- sdhci_writel(host, temp, ESDHC_DMA_SYSCTL);
+ esdhc_flush_async_fifo(host);
}
-
- /* Wait max 20 ms */
- timeout = ktime_add_ms(ktime_get(), 20);
- while (1) {
- bool timedout = ktime_after(ktime_get(), timeout);
-
- if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE)
- break;
- if (timedout) {
- pr_err("%s: Internal clock never stabilised.\n",
- mmc_hostname(host->mmc));
- return;
- }
- udelay(10);
- }
-
- temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
- temp |= ESDHC_CLOCK_SDCLKEN;
- sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
+ esdhc_clock_enable(host, true);
}
static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
@@ -866,20 +930,20 @@
}
static struct soc_device_attribute soc_tuning_erratum_type1[] = {
- { .family = "QorIQ T1023", .revision = "1.0", },
- { .family = "QorIQ T1040", .revision = "1.0", },
- { .family = "QorIQ T2080", .revision = "1.0", },
- { .family = "QorIQ LS1021A", .revision = "1.0", },
+ { .family = "QorIQ T1023", },
+ { .family = "QorIQ T1040", },
+ { .family = "QorIQ T2080", },
+ { .family = "QorIQ LS1021A", },
{ },
};
static struct soc_device_attribute soc_tuning_erratum_type2[] = {
- { .family = "QorIQ LS1012A", .revision = "1.0", },
- { .family = "QorIQ LS1043A", .revision = "1.*", },
- { .family = "QorIQ LS1046A", .revision = "1.0", },
- { .family = "QorIQ LS1080A", .revision = "1.0", },
- { .family = "QorIQ LS2080A", .revision = "1.0", },
- { .family = "QorIQ LA1575A", .revision = "1.0", },
+ { .family = "QorIQ LS1012A", },
+ { .family = "QorIQ LS1043A", },
+ { .family = "QorIQ LS1046A", },
+ { .family = "QorIQ LS1080A", },
+ { .family = "QorIQ LS2080A", },
+ { .family = "QorIQ LA1575A", },
{ },
};
@@ -888,10 +952,7 @@
u32 val;
esdhc_clock_enable(host, false);
-
- val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
- val |= ESDHC_FLUSH_ASYNC_FIFO;
- sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+ esdhc_flush_async_fifo(host);
val = sdhci_readl(host, ESDHC_TBCTL);
if (enable)
@@ -903,20 +964,11 @@
esdhc_clock_enable(host, true);
}
-static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start,
+static void esdhc_tuning_window_ptr(struct sdhci_host *host, u8 *window_start,
u8 *window_end)
{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
- u8 tbstat_15_8, tbstat_7_0;
u32 val;
- if (esdhc->quirk_tuning_erratum_type1) {
- *window_start = 5 * esdhc->div_ratio;
- *window_end = 3 * esdhc->div_ratio;
- return;
- }
-
/* Write TBCTL[11:8]=4'h8 */
val = sdhci_readl(host, ESDHC_TBCTL);
val &= ~(0xf << 8);
@@ -935,20 +987,37 @@
val = sdhci_readl(host, ESDHC_TBSTAT);
val = sdhci_readl(host, ESDHC_TBSTAT);
+ *window_end = val & 0xff;
+ *window_start = (val >> 8) & 0xff;
+}
+
+static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start,
+ u8 *window_end)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
+ u8 start_ptr, end_ptr;
+
+ if (esdhc->quirk_tuning_erratum_type1) {
+ *window_start = 5 * esdhc->div_ratio;
+ *window_end = 3 * esdhc->div_ratio;
+ return;
+ }
+
+ esdhc_tuning_window_ptr(host, &start_ptr, &end_ptr);
+
/* Reset data lines by setting ESDHCCTL[RSTD] */
sdhci_reset(host, SDHCI_RESET_DATA);
/* Write 32'hFFFF_FFFF to IRQSTAT register */
sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS);
- /* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio
- * or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio,
+ /* If TBSTAT[15:8]-TBSTAT[7:0] > (4 * div_ratio) + 2
+ * or TBSTAT[7:0]-TBSTAT[15:8] > (4 * div_ratio) + 2,
* then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio
* and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio.
*/
- tbstat_7_0 = val & 0xff;
- tbstat_15_8 = (val >> 8) & 0xff;
- if (abs(tbstat_15_8 - tbstat_7_0) > (4 * esdhc->div_ratio)) {
+ if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio + 2)) {
*window_start = 8 * esdhc->div_ratio;
*window_end = 4 * esdhc->div_ratio;
} else {
@@ -1032,6 +1101,19 @@
if (ret)
break;
+ /* For type2 affected platforms of the tuning erratum,
+ * tuning may succeed although eSDHC might not have
+ * tuned properly. Need to check tuning window.
+ */
+ if (esdhc->quirk_tuning_erratum_type2 &&
+ !host->tuning_err) {
+ esdhc_tuning_window_ptr(host, &window_start,
+ &window_end);
+ if (abs(window_start - window_end) >
+ (4 * esdhc->div_ratio + 2))
+ host->tuning_err = -EAGAIN;
+ }
+
/* If HW tuning fails and triggers erratum,
* try workaround.
*/
@@ -1086,6 +1168,40 @@
static void esdhc_set_uhs_signaling(struct sdhci_host *host,
unsigned int timing)
{
+ u32 val;
+
+ /*
+ * There are specific registers setting for HS400 mode.
+ * Clean all of them if controller is in HS400 mode to
+ * exit HS400 mode before re-setting any speed mode.
+ */
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ if (val & ESDHC_HS400_MODE) {
+ val = sdhci_readl(host, ESDHC_SDTIMNGCTL);
+ val &= ~ESDHC_FLW_CTL_BG;
+ sdhci_writel(host, val, ESDHC_SDTIMNGCTL);
+
+ val = sdhci_readl(host, ESDHC_SDCLKCTL);
+ val &= ~ESDHC_CMD_CLK_CTL;
+ sdhci_writel(host, val, ESDHC_SDCLKCTL);
+
+ esdhc_clock_enable(host, false);
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_HS400_MODE;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+ esdhc_clock_enable(host, true);
+
+ val = sdhci_readl(host, ESDHC_DLLCFG0);
+ val &= ~(ESDHC_DLL_ENABLE | ESDHC_DLL_FREQ_SEL);
+ sdhci_writel(host, val, ESDHC_DLLCFG0);
+
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_HS400_WNDW_ADJUST;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+
+ esdhc_tuning_block_enable(host, false);
+ }
+
if (timing == MMC_TIMING_MMC_HS400)
esdhc_tuning_block_enable(host, true);
else
@@ -1269,7 +1385,8 @@
* 1/2 peripheral clock.
*/
if (of_device_is_compatible(np, "fsl,ls1046a-esdhc") ||
- of_device_is_compatible(np, "fsl,ls1028a-esdhc"))
+ of_device_is_compatible(np, "fsl,ls1028a-esdhc") ||
+ of_device_is_compatible(np, "fsl,ls1088a-esdhc"))
esdhc->peripheral_clock = clk_get_rate(clk) / 2;
else
esdhc->peripheral_clock = clk_get_rate(clk);
@@ -1277,13 +1394,19 @@
clk_put(clk);
}
- if (esdhc->peripheral_clock) {
- esdhc_clock_enable(host, false);
- val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ esdhc_clock_enable(host, false);
+ val = sdhci_readl(host, ESDHC_DMA_SYSCTL);
+ /*
+ * This bit is not able to be reset by SDHCI_RESET_ALL. Need to
+ * initialize it as 1 or 0 once, to override the different value
+ * which may be configured in bootloader.
+ */
+ if (esdhc->peripheral_clock)
val |= ESDHC_PERIPHERAL_CLK_SEL;
- sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
- esdhc_clock_enable(host, true);
- }
+ else
+ val &= ~ESDHC_PERIPHERAL_CLK_SEL;
+ sdhci_writel(host, val, ESDHC_DMA_SYSCTL);
+ esdhc_clock_enable(host, true);
}
static int esdhc_hs400_prepare_ddr(struct mmc_host *mmc)
@@ -1385,6 +1508,7 @@
static struct platform_driver sdhci_esdhc_driver = {
.driver = {
.name = "sdhci-esdhc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_esdhc_of_match,
.pm = &esdhc_of_dev_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index da844a3..1267579 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -80,6 +80,7 @@
static struct platform_driver sdhci_hlwd_driver = {
.driver = {
.name = "sdhci-hlwd",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_hlwd_of_match,
.pm = &sdhci_pltfm_pmops,
},
diff --git a/drivers/mmc/host/sdhci-of-sparx5.c b/drivers/mmc/host/sdhci-of-sparx5.c
new file mode 100644
index 0000000..28e4ee6
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-sparx5.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/mmc/host/sdhci-of-sparx5.c
+ *
+ * MCHP Sparx5 SoC Secure Digital Host Controller Interface.
+ *
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/sizes.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/dma-mapping.h>
+
+#include "sdhci-pltfm.h"
+
+#define CPU_REGS_GENERAL_CTRL (0x22 * 4)
+#define MSHC_DLY_CC_MASK GENMASK(16, 13)
+#define MSHC_DLY_CC_SHIFT 13
+#define MSHC_DLY_CC_MAX 15
+
+#define CPU_REGS_PROC_CTRL (0x2C * 4)
+#define ACP_CACHE_FORCE_ENA BIT(4)
+#define ACP_AWCACHE BIT(3)
+#define ACP_ARCACHE BIT(2)
+#define ACP_CACHE_MASK (ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE)
+
+#define MSHC2_VERSION 0x500 /* Off 0x140, reg 0x0 */
+#define MSHC2_TYPE 0x504 /* Off 0x140, reg 0x1 */
+#define MSHC2_EMMC_CTRL 0x52c /* Off 0x140, reg 0xB */
+#define MSHC2_EMMC_CTRL_EMMC_RST_N BIT(2)
+#define MSHC2_EMMC_CTRL_IS_EMMC BIT(0)
+
+struct sdhci_sparx5_data {
+ struct sdhci_host *host;
+ struct regmap *cpu_ctrl;
+ int delay_clock;
+};
+
+#define BOUNDARY_OK(addr, len) \
+ ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
+
+/*
+ * If DMA addr spans 128MB boundary, we split the DMA transfer into two
+ * so that each DMA transfer doesn't exceed the boundary.
+ */
+static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc,
+ dma_addr_t addr, int len,
+ unsigned int cmd)
+{
+ int tmplen, offset;
+
+ if (likely(!len || BOUNDARY_OK(addr, len))) {
+ sdhci_adma_write_desc(host, desc, addr, len, cmd);
+ return;
+ }
+
+ pr_debug("%s: write_desc: splitting dma len %d, offset %pad\n",
+ mmc_hostname(host->mmc), len, &addr);
+
+ offset = addr & (SZ_128M - 1);
+ tmplen = SZ_128M - offset;
+ sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
+
+ addr += tmplen;
+ len -= tmplen;
+ sdhci_adma_write_desc(host, desc, addr, len, cmd);
+}
+
+static void sparx5_set_cacheable(struct sdhci_host *host, u32 value)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
+
+ pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value);
+
+ /* Update ACP caching attributes in HW */
+ regmap_update_bits(sdhci_sparx5->cpu_ctrl,
+ CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value);
+}
+
+static void sparx5_set_delay(struct sdhci_host *host, u8 value)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
+
+ pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value);
+
+ /* Update DLY_CC in HW */
+ regmap_update_bits(sdhci_sparx5->cpu_ctrl,
+ CPU_REGS_GENERAL_CTRL,
+ MSHC_DLY_CC_MASK,
+ (value << MSHC_DLY_CC_SHIFT));
+}
+
+static void sdhci_sparx5_set_emmc(struct sdhci_host *host)
+{
+ if (!mmc_card_is_removable(host->mmc)) {
+ u8 value;
+
+ value = sdhci_readb(host, MSHC2_EMMC_CTRL);
+ if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) {
+ value |= MSHC2_EMMC_CTRL_IS_EMMC;
+ pr_debug("%s: Set EMMC_CTRL: 0x%08x\n",
+ mmc_hostname(host->mmc), value);
+ sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
+ }
+ }
+}
+
+static void sdhci_sparx5_reset_emmc(struct sdhci_host *host)
+{
+ u8 value;
+
+ pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc));
+ value = sdhci_readb(host, MSHC2_EMMC_CTRL) &
+ ~MSHC2_EMMC_CTRL_EMMC_RST_N;
+ sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
+ /* For eMMC, minimum is 1us but give it 10us for good measure */
+ usleep_range(10, 20);
+ sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N,
+ MSHC2_EMMC_CTRL);
+ /* For eMMC, minimum is 200us but give it 300us for good measure */
+ usleep_range(300, 400);
+}
+
+static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask)
+{
+ pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask);
+
+ sdhci_reset(host, mask);
+
+ /* Be sure CARD_IS_EMMC stays set */
+ sdhci_sparx5_set_emmc(host);
+}
+
+static const struct sdhci_ops sdhci_sparx5_ops = {
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .reset = sdhci_sparx5_reset,
+ .adma_write_desc = sdhci_sparx5_adma_write_desc,
+};
+
+static const struct sdhci_pltfm_data sdhci_sparx5_pdata = {
+ .quirks = 0,
+ .quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */
+ SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */
+ .ops = &sdhci_sparx5_ops,
+};
+
+static int sdhci_sparx5_probe(struct platform_device *pdev)
+{
+ int ret;
+ const char *syscon = "microchip,sparx5-cpu-syscon";
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_sparx5_data *sdhci_sparx5;
+ struct device_node *np = pdev->dev.of_node;
+ u32 value;
+ u32 extra;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
+ sizeof(*sdhci_sparx5));
+
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ /*
+ * extra adma table cnt for cross 128M boundary handling.
+ */
+ extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
+ if (extra > SDHCI_MAX_SEGS)
+ extra = SDHCI_MAX_SEGS;
+ host->adma_table_cnt += extra;
+
+ pltfm_host = sdhci_priv(host);
+ sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
+ sdhci_sparx5->host = host;
+
+ pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(pltfm_host->clk)) {
+ ret = PTR_ERR(pltfm_host->clk);
+ dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
+ goto free_pltfm;
+ }
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret)
+ goto free_pltfm;
+
+ if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
+ (value > 0 && value <= MSHC_DLY_CC_MAX))
+ sdhci_sparx5->delay_clock = value;
+
+ sdhci_get_of_property(pdev);
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto err_clk;
+
+ sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
+ if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
+ dev_err(&pdev->dev, "No CPU syscon regmap !\n");
+ ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
+ goto err_clk;
+ }
+
+ if (sdhci_sparx5->delay_clock >= 0)
+ sparx5_set_delay(host, sdhci_sparx5->delay_clock);
+
+ if (!mmc_card_is_removable(host->mmc)) {
+ /* Do a HW reset of eMMC card */
+ sdhci_sparx5_reset_emmc(host);
+ /* Update EMMC_CTRL */
+ sdhci_sparx5_set_emmc(host);
+ /* If eMMC, disable SD and SDIO */
+ host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
+ }
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_clk;
+
+ /* Set AXI bus master to use un-cached access (for DMA) */
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
+ IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
+ sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
+
+ pr_debug("%s: SDHC version: 0x%08x\n",
+ mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
+ pr_debug("%s: SDHC type: 0x%08x\n",
+ mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
+
+ return ret;
+
+err_clk:
+ clk_disable_unprepare(pltfm_host->clk);
+free_pltfm:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static const struct of_device_id sdhci_sparx5_of_match[] = {
+ { .compatible = "microchip,dw-sparx5-sdhci" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match);
+
+static struct platform_driver sdhci_sparx5_driver = {
+ .driver = {
+ .name = "sdhci-sparx5",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = sdhci_sparx5_of_match,
+ .pm = &sdhci_pltfm_pmops,
+ },
+ .probe = sdhci_sparx5_probe,
+ .remove = sdhci_pltfm_unregister,
+};
+
+module_platform_driver(sdhci_sparx5_driver);
+
+MODULE_DESCRIPTION("Sparx5 SDHCI OF driver");
+MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index d313524..53c362b 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -7,6 +7,7 @@
*/
#include <linux/delay.h>
+#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -61,6 +62,8 @@
#define SDHCI_OMAP_IE 0x234
#define INT_CC_EN BIT(0)
+#define SDHCI_OMAP_ISE 0x238
+
#define SDHCI_OMAP_AC12 0x23c
#define AC12_V1V8_SIGEN BIT(19)
#define AC12_SCLK_SEL BIT(23)
@@ -85,6 +88,7 @@
/* sdhci-omap controller flags */
#define SDHCI_OMAP_REQUIRE_IODELAY BIT(0)
+#define SDHCI_OMAP_SPECIAL_RESET BIT(1)
struct sdhci_omap_data {
u32 offset;
@@ -106,6 +110,13 @@
struct pinctrl *pinctrl;
struct pinctrl_state **pinctrl_state;
bool is_tuning;
+ /* Omap specific context save */
+ u32 con;
+ u32 hctl;
+ u32 sysctl;
+ u32 capa;
+ u32 ie;
+ u32 ise;
};
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
@@ -675,7 +686,8 @@
{
struct mmc_host *mmc = host->mmc;
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
static int sdhci_omap_enable_dma(struct sdhci_host *host)
@@ -685,7 +697,11 @@
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
- reg |= CON_DMA_MASTER;
+ reg &= ~CON_DMA_MASTER;
+ /* Switch to DMA slave mode when using external DMA */
+ if (!host->use_external_dma)
+ reg |= CON_DMA_MASTER;
+
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
return 0;
@@ -774,15 +790,35 @@
sdhci_omap_start_clock(omap_host);
}
+#define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */
static void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+ unsigned long limit = MMC_TIMEOUT_US;
+ unsigned long i = 0;
/* Don't reset data lines during tuning operation */
if (omap_host->is_tuning)
mask &= ~SDHCI_RESET_DATA;
+ if (omap_host->flags & SDHCI_OMAP_SPECIAL_RESET) {
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+ while ((!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)) &&
+ (i++ < limit))
+ udelay(1);
+ i = 0;
+ while ((sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) &&
+ (i++ < limit))
+ udelay(1);
+
+ if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)
+ dev_err(mmc_dev(host->mmc),
+ "Timeout waiting on controller reset in %s\n",
+ __func__);
+ return;
+ }
+
sdhci_reset(host, mask);
}
@@ -823,6 +859,15 @@
return intmask;
}
+static void sdhci_omap_set_timeout(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ if (cmd->opcode == MMC_ERASE)
+ sdhci_set_data_timeout_irq(host, false);
+
+ __sdhci_set_timeout(host, cmd);
+}
+
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@@ -834,6 +879,7 @@
.reset = sdhci_omap_reset,
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
.irq = sdhci_omap_irq,
+ .set_timeout = sdhci_omap_set_timeout,
};
static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host)
@@ -883,6 +929,16 @@
.offset = 0x200,
};
+static const struct sdhci_omap_data am335_data = {
+ .offset = 0x200,
+ .flags = SDHCI_OMAP_SPECIAL_RESET,
+};
+
+static const struct sdhci_omap_data am437_data = {
+ .offset = 0x200,
+ .flags = SDHCI_OMAP_SPECIAL_RESET,
+};
+
static const struct sdhci_omap_data dra7_data = {
.offset = 0x200,
.flags = SDHCI_OMAP_REQUIRE_IODELAY,
@@ -891,6 +947,8 @@
static const struct of_device_id omap_sdhci_match[] = {
{ .compatible = "ti,dra7-sdhci", .data = &dra7_data },
{ .compatible = "ti,k2g-sdhci", .data = &k2g_data },
+ { .compatible = "ti,am335-sdhci", .data = &am335_data },
+ { .compatible = "ti,am437-sdhci", .data = &am437_data },
{},
};
MODULE_DEVICE_TABLE(of, omap_sdhci_match);
@@ -1037,6 +1095,7 @@
const struct of_device_id *match;
struct sdhci_omap_data *data;
const struct soc_device_attribute *soc;
+ struct resource *regs;
match = of_match_device(omap_sdhci_match, dev);
if (!match)
@@ -1049,6 +1108,10 @@
}
offset = data->offset;
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+
host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
sizeof(*omap_host));
if (IS_ERR(host)) {
@@ -1065,6 +1128,7 @@
omap_host->timing = MMC_TIMING_LEGACY;
omap_host->flags = data->flags;
host->ioaddr += offset;
+ host->mapbase = regs->start + offset;
mmc = host->mmc;
sdhci_get_of_property(pdev);
@@ -1134,6 +1198,10 @@
host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
+ /* Switch to external DMA only if there is the "dmas" property */
+ if (of_find_property(dev->of_node, "dmas", NULL))
+ sdhci_switch_external_dma(host, true);
+
/* R1B responses is required to properly manage HW busy detection. */
mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
@@ -1177,12 +1245,74 @@
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static void sdhci_omap_context_save(struct sdhci_omap_host *omap_host)
+{
+ omap_host->con = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
+ omap_host->hctl = sdhci_omap_readl(omap_host, SDHCI_OMAP_HCTL);
+ omap_host->sysctl = sdhci_omap_readl(omap_host, SDHCI_OMAP_SYSCTL);
+ omap_host->capa = sdhci_omap_readl(omap_host, SDHCI_OMAP_CAPA);
+ omap_host->ie = sdhci_omap_readl(omap_host, SDHCI_OMAP_IE);
+ omap_host->ise = sdhci_omap_readl(omap_host, SDHCI_OMAP_ISE);
+}
+
+/* Order matters here, HCTL must be restored in two phases */
+static void sdhci_omap_context_restore(struct sdhci_omap_host *omap_host)
+{
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_HCTL, omap_host->hctl);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_CAPA, omap_host->capa);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_HCTL, omap_host->hctl);
+
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_SYSCTL, omap_host->sysctl);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, omap_host->con);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_IE, omap_host->ie);
+ sdhci_omap_writel(omap_host, SDHCI_OMAP_ISE, omap_host->ise);
+}
+
+static int __maybe_unused sdhci_omap_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ sdhci_suspend_host(host);
+
+ sdhci_omap_context_save(omap_host);
+
+ pinctrl_pm_select_idle_state(dev);
+
+ pm_runtime_force_suspend(dev);
+
+ return 0;
+}
+
+static int __maybe_unused sdhci_omap_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ pm_runtime_force_resume(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ sdhci_omap_context_restore(omap_host);
+
+ sdhci_resume_host(host);
+
+ return 0;
+}
+#endif
+static SIMPLE_DEV_PM_OPS(sdhci_omap_dev_pm_ops, sdhci_omap_suspend,
+ sdhci_omap_resume);
static struct platform_driver sdhci_omap_driver = {
.probe = sdhci_omap_probe,
.remove = sdhci_omap_remove,
.driver = {
.name = "sdhci-omap",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .pm = &sdhci_omap_dev_pm_ops,
.of_match_table = omap_sdhci_match,
},
};
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index a9151bd..a78b060 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -259,12 +259,8 @@
static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->caps =
- ((0x21 << SDHCI_TIMEOUT_CLK_SHIFT)
- & SDHCI_TIMEOUT_CLK_MASK) |
-
- ((0x21 << SDHCI_CLOCK_BASE_SHIFT)
- & SDHCI_CLOCK_BASE_MASK) |
-
+ FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) |
+ FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) |
SDHCI_TIMEOUT_CLK_UNIT |
SDHCI_CAN_VDD_330 |
SDHCI_CAN_DO_HISPD |
@@ -1936,6 +1932,7 @@
SDHCI_PCI_DEVICE(INTEL, JSL_SD, intel_byt_sd),
SDHCI_PCI_DEVICE(INTEL, LKF_EMMC, intel_glk_emmc),
SDHCI_PCI_DEVICE(INTEL, LKF_SD, intel_byt_sd),
+ SDHCI_PCI_DEVICE(INTEL, ADL_EMMC, intel_glk_emmc),
SDHCI_PCI_DEVICE(O2, 8120, o2),
SDHCI_PCI_DEVICE(O2, 8220, o2),
SDHCI_PCI_DEVICE(O2, 8221, o2),
@@ -1950,6 +1947,7 @@
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
+ SDHCI_PCI_DEVICE(GLI, 9763E, gl9763e),
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
/* Generic SD host controller */
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
@@ -2195,12 +2193,12 @@
if (slot->cd_idx >= 0) {
ret = mmc_gpiod_request_cd(host->mmc, "cd", slot->cd_idx,
- slot->cd_override_level, 0, NULL);
+ slot->cd_override_level, 0);
if (ret && ret != -EPROBE_DEFER)
ret = mmc_gpiod_request_cd(host->mmc, NULL,
slot->cd_idx,
slot->cd_override_level,
- 0, NULL);
+ 0);
if (ret == -EPROBE_DEFER)
goto remove;
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index 4437ea4..23b89b4 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include "sdhci.h"
#include "sdhci-pci.h"
+#include "cqhci.h"
/* Genesys Logic extra registers */
#define SDHCI_GLI_9750_WT 0x800
@@ -31,10 +32,18 @@
#define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30))
#define SDHCI_GLI_9750_PLL 0x864
+#define SDHCI_GLI_9750_PLL_LDIV GENMASK(9, 0)
+#define SDHCI_GLI_9750_PLL_PDIV GENMASK(14, 12)
+#define SDHCI_GLI_9750_PLL_DIR BIT(15)
#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
#define GLI_9750_PLL_TX2_INV_VALUE 0x1
#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
+#define SDHCI_GLI_9750_PLLSSC_STEP GENMASK(28, 24)
+#define SDHCI_GLI_9750_PLLSSC_EN BIT(31)
+
+#define SDHCI_GLI_9750_PLLSSC 0x86C
+#define SDHCI_GLI_9750_PLLSSC_PPM GENMASK(31, 16)
#define SDHCI_GLI_9750_SW_CTRL 0x874
#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
@@ -63,6 +72,41 @@
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
+#define SDHCI_GLI_9763E_CTRL_HS400 0x7
+
+#define SDHCI_GLI_9763E_HS400_ES_REG 0x52C
+#define SDHCI_GLI_9763E_HS400_ES_BIT BIT(8)
+
+#define PCIE_GLI_9763E_VHS 0x884
+#define GLI_9763E_VHS_REV GENMASK(19, 16)
+#define GLI_9763E_VHS_REV_R 0x0
+#define GLI_9763E_VHS_REV_M 0x1
+#define GLI_9763E_VHS_REV_W 0x2
+#define PCIE_GLI_9763E_MB 0x888
+#define GLI_9763E_MB_CMDQ_OFF BIT(19)
+#define PCIE_GLI_9763E_SCR 0x8E0
+#define GLI_9763E_SCR_AXI_REQ BIT(9)
+
+#define SDHCI_GLI_9763E_CQE_BASE_ADDR 0x200
+#define GLI_9763E_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
+ SDHCI_TRNS_BLK_CNT_EN | \
+ SDHCI_TRNS_DMA)
+
+#define PCI_GLI_9755_WT 0x800
+#define PCI_GLI_9755_WT_EN BIT(0)
+#define GLI_9755_WT_EN_ON 0x1
+#define GLI_9755_WT_EN_OFF 0x0
+
+#define PCI_GLI_9755_PLL 0x64
+#define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0)
+#define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12)
+#define PCI_GLI_9755_PLL_DIR BIT(15)
+#define PCI_GLI_9755_PLLSSC_STEP GENMASK(28, 24)
+#define PCI_GLI_9755_PLLSSC_EN BIT(31)
+
+#define PCI_GLI_9755_PLLSSC 0x68
+#define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0)
+
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
@@ -267,6 +311,84 @@
return 0;
}
+static void gl9750_disable_ssc_pll(struct sdhci_host *host)
+{
+ u32 pll;
+
+ gl9750_wt_on(host);
+ pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
+ pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN);
+ sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
+ gl9750_wt_off(host);
+}
+
+static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv)
+{
+ u32 pll;
+
+ gl9750_wt_on(host);
+ pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
+ pll &= ~(SDHCI_GLI_9750_PLL_LDIV |
+ SDHCI_GLI_9750_PLL_PDIV |
+ SDHCI_GLI_9750_PLL_DIR);
+ pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) |
+ FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) |
+ FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir);
+ sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
+ gl9750_wt_off(host);
+
+ /* wait for pll stable */
+ mdelay(1);
+}
+
+static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm)
+{
+ u32 pll;
+ u32 ssc;
+
+ gl9750_wt_on(host);
+ pll = sdhci_readl(host, SDHCI_GLI_9750_PLL);
+ ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC);
+ pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP |
+ SDHCI_GLI_9750_PLLSSC_EN);
+ ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM;
+ pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) |
+ FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable);
+ ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm);
+ sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC);
+ sdhci_writel(host, pll, SDHCI_GLI_9750_PLL);
+ gl9750_wt_off(host);
+}
+
+static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host)
+{
+ /* set pll to 205MHz and enable ssc */
+ gl9750_set_ssc(host, 0x1, 0x1F, 0xFFE7);
+ gl9750_set_pll(host, 0x1, 0x246, 0x0);
+}
+
+static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct mmc_ios *ios = &host->mmc->ios;
+ u16 clk;
+
+ host->mmc->actual_clock = 0;
+
+ gl9750_disable_ssc_pll(host);
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
+ host->mmc->actual_clock = 205000000;
+ gl9750_set_ssc_pll_205mhz(host);
+ }
+
+ sdhci_enable_clk(host, clk);
+}
+
static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
{
int ret;
@@ -282,6 +404,121 @@
slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
}
+static inline void gl9755_wt_on(struct pci_dev *pdev)
+{
+ u32 wt_value;
+ u32 wt_enable;
+
+ pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
+ wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
+
+ if (wt_enable == GLI_9755_WT_EN_ON)
+ return;
+
+ wt_value &= ~PCI_GLI_9755_WT_EN;
+ wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON);
+
+ pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
+}
+
+static inline void gl9755_wt_off(struct pci_dev *pdev)
+{
+ u32 wt_value;
+ u32 wt_enable;
+
+ pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value);
+ wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value);
+
+ if (wt_enable == GLI_9755_WT_EN_OFF)
+ return;
+
+ wt_value &= ~PCI_GLI_9755_WT_EN;
+ wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF);
+
+ pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value);
+}
+
+static void gl9755_disable_ssc_pll(struct pci_dev *pdev)
+{
+ u32 pll;
+
+ gl9755_wt_on(pdev);
+ pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
+ pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN);
+ pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
+ gl9755_wt_off(pdev);
+}
+
+static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv)
+{
+ u32 pll;
+
+ gl9755_wt_on(pdev);
+ pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
+ pll &= ~(PCI_GLI_9755_PLL_LDIV |
+ PCI_GLI_9755_PLL_PDIV |
+ PCI_GLI_9755_PLL_DIR);
+ pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) |
+ FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) |
+ FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir);
+ pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
+ gl9755_wt_off(pdev);
+
+ /* wait for pll stable */
+ mdelay(1);
+}
+
+static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm)
+{
+ u32 pll;
+ u32 ssc;
+
+ gl9755_wt_on(pdev);
+ pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll);
+ pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc);
+ pll &= ~(PCI_GLI_9755_PLLSSC_STEP |
+ PCI_GLI_9755_PLLSSC_EN);
+ ssc &= ~PCI_GLI_9755_PLLSSC_PPM;
+ pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) |
+ FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable);
+ ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm);
+ pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc);
+ pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll);
+ gl9755_wt_off(pdev);
+}
+
+static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev)
+{
+ /* set pll to 205MHz and enable ssc */
+ gl9755_set_ssc(pdev, 0x1, 0x1F, 0xFFE7);
+ gl9755_set_pll(pdev, 0x1, 0x246, 0x0);
+}
+
+static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct mmc_ios *ios = &host->mmc->ios;
+ struct pci_dev *pdev;
+ u16 clk;
+
+ pdev = slot->chip->pdev;
+ host->mmc->actual_clock = 0;
+
+ gl9755_disable_ssc_pll(pdev);
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return;
+
+ clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+ if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
+ host->mmc->actual_clock = 205000000;
+ gl9755_set_ssc_pll_205mhz(pdev);
+ }
+
+ sdhci_enable_clk(host, clk);
+}
+
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
@@ -354,10 +591,220 @@
return sdhci_pci_resume_host(chip);
}
+
+static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip)
+{
+ struct sdhci_pci_slot *slot = chip->slots[0];
+ int ret;
+
+ ret = sdhci_pci_gli_resume(chip);
+ if (ret)
+ return ret;
+
+ return cqhci_resume(slot->host->mmc);
+}
+
+static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip)
+{
+ struct sdhci_pci_slot *slot = chip->slots[0];
+ int ret;
+
+ ret = cqhci_suspend(slot->host->mmc);
+ if (ret)
+ return ret;
+
+ return sdhci_suspend_host(slot->host);
+}
#endif
+static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 val;
+
+ val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG);
+ if (ios->enhanced_strobe)
+ val |= SDHCI_GLI_9763E_HS400_ES_BIT;
+ else
+ val &= ~SDHCI_GLI_9763E_HS400_ES_BIT;
+
+ sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG);
+}
+
+static void sdhci_set_gl9763e_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if (timing == MMC_TIMING_MMC_HS200)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_MMC_HS)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_MMC_DDR52)
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400;
+
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc)
+{
+ sdhci_dumpregs(mmc_priv(mmc));
+}
+
+static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc)
+{
+ struct cqhci_host *cq_host = mmc->cqe_private;
+ u32 value;
+
+ value = cqhci_readl(cq_host, CQHCI_CFG);
+ value |= CQHCI_ENABLE;
+ cqhci_writel(cq_host, value, CQHCI_CFG);
+}
+
+static void sdhci_gl9763e_cqe_enable(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ sdhci_writew(host, GLI_9763E_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
+ sdhci_cqe_enable(mmc);
+}
+
+static u32 sdhci_gl9763e_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+ int cmd_error = 0;
+ int data_error = 0;
+
+ if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+ return intmask;
+
+ cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+ return 0;
+}
+
+static void sdhci_gl9763e_cqe_post_disable(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct cqhci_host *cq_host = mmc->cqe_private;
+ u32 value;
+
+ value = cqhci_readl(cq_host, CQHCI_CFG);
+ value &= ~CQHCI_ENABLE;
+ cqhci_writel(cq_host, value, CQHCI_CFG);
+ sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
+}
+
+static const struct cqhci_host_ops sdhci_gl9763e_cqhci_ops = {
+ .enable = sdhci_gl9763e_cqe_enable,
+ .disable = sdhci_cqe_disable,
+ .dumpregs = sdhci_gl9763e_dumpregs,
+ .pre_enable = sdhci_gl9763e_cqe_pre_enable,
+ .post_disable = sdhci_gl9763e_cqe_post_disable,
+};
+
+static int gl9763e_add_host(struct sdhci_pci_slot *slot)
+{
+ struct device *dev = &slot->chip->pdev->dev;
+ struct sdhci_host *host = slot->host;
+ struct cqhci_host *cq_host;
+ bool dma64;
+ int ret;
+
+ ret = sdhci_setup_host(host);
+ if (ret)
+ return ret;
+
+ cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL);
+ if (!cq_host) {
+ ret = -ENOMEM;
+ goto cleanup;
+ }
+
+ cq_host->mmio = host->ioaddr + SDHCI_GLI_9763E_CQE_BASE_ADDR;
+ cq_host->ops = &sdhci_gl9763e_cqhci_ops;
+
+ dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+ if (dma64)
+ cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+
+ ret = cqhci_init(cq_host, host->mmc, dma64);
+ if (ret)
+ goto cleanup;
+
+ ret = __sdhci_add_host(host);
+ if (ret)
+ goto cleanup;
+
+ return 0;
+
+cleanup:
+ sdhci_cleanup_host(host);
+ return ret;
+}
+
+static void sdhci_gl9763e_reset(struct sdhci_host *host, u8 mask)
+{
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
+ host->mmc->cqe_private)
+ cqhci_deactivate(host->mmc);
+ sdhci_reset(host, mask);
+}
+
+static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
+{
+ struct pci_dev *pdev = slot->chip->pdev;
+ u32 value;
+
+ pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
+ value &= ~GLI_9763E_VHS_REV;
+ value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
+ pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value);
+ value |= GLI_9763E_SCR_AXI_REQ;
+ pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
+
+ pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
+ value &= ~GLI_9763E_VHS_REV;
+ value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
+ pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
+}
+
+static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
+{
+ struct pci_dev *pdev = slot->chip->pdev;
+ struct sdhci_host *host = slot->host;
+ u32 value;
+
+ host->mmc->caps |= MMC_CAP_8_BIT_DATA |
+ MMC_CAP_1_8V_DDR |
+ MMC_CAP_NONREMOVABLE;
+ host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR |
+ MMC_CAP2_HS400_1_8V |
+ MMC_CAP2_HS400_ES |
+ MMC_CAP2_NO_SDIO |
+ MMC_CAP2_NO_SD;
+
+ pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value);
+ if (!(value & GLI_9763E_MB_CMDQ_OFF))
+ host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+
+ gli_pcie_enable_msi(slot);
+ host->mmc_host_ops.hs400_enhanced_strobe =
+ gl9763e_hs400_enhanced_strobe;
+ gli_set_gl9763e(slot);
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
static const struct sdhci_ops sdhci_gl9755_ops = {
- .set_clock = sdhci_set_clock,
+ .set_clock = sdhci_gl9755_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
@@ -377,7 +824,7 @@
static const struct sdhci_ops sdhci_gl9750_ops = {
.read_l = sdhci_gl9750_readl,
- .set_clock = sdhci_set_clock,
+ .set_clock = sdhci_gl9750_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_gl9750_reset,
@@ -395,3 +842,24 @@
.resume = sdhci_pci_gli_resume,
#endif
};
+
+static const struct sdhci_ops sdhci_gl9763e_ops = {
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_gl9763e_reset,
+ .set_uhs_signaling = sdhci_set_gl9763e_signaling,
+ .voltage_switch = sdhci_gli_voltage_switch,
+ .irq = sdhci_gl9763e_cqhci_irq,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9763e = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .probe_slot = gli_probe_slot_gl9763e,
+ .ops = &sdhci_gl9763e_ops,
+#ifdef CONFIG_PM_SLEEP
+ .resume = sdhci_cqhci_gli_resume,
+ .suspend = sdhci_cqhci_gli_suspend,
+#endif
+ .add_host = gl9763e_add_host,
+};
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 41a2394..94e3f72 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -33,6 +33,8 @@
#define O2_SD_ADMA2 0xE7
#define O2_SD_INF_MOD 0xF1
#define O2_SD_MISC_CTRL4 0xFC
+#define O2_SD_MISC_CTRL 0x1C0
+#define O2_SD_PWR_FORCE_L0 0x0002
#define O2_SD_TUNING_CTRL 0x300
#define O2_SD_PLL_SETTING 0x304
#define O2_SD_MISC_SETTING 0x308
@@ -196,7 +198,7 @@
{
int i;
- sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200);
+ sdhci_send_tuning(host, opcode);
for (i = 0; i < 150; i++) {
u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
@@ -300,16 +302,31 @@
{
struct sdhci_host *host = mmc_priv(mmc);
int current_bus_width = 0;
+ u32 scratch32 = 0;
+ u16 scratch = 0;
/*
* This handler only implements the eMMC tuning that is specific to
* this controller. Fall back to the standard method for other TIMING.
*/
- if (host->timing != MMC_TIMING_MMC_HS200)
+ if ((host->timing != MMC_TIMING_MMC_HS200) &&
+ (host->timing != MMC_TIMING_UHS_SDR104))
return sdhci_execute_tuning(mmc, opcode);
- if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200))
+ if (WARN_ON((opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+ (opcode != MMC_SEND_TUNING_BLOCK)))
return -EINVAL;
+
+ /* Force power mode enter L0 */
+ scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
+ scratch |= O2_SD_PWR_FORCE_L0;
+ sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
+
+ /* wait DLL lock, timeout value 5ms */
+ if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
+ scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
+ pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n",
+ mmc_hostname(host->mmc));
/*
* Judge the tuning reason, whether caused by dll shift
* If cause by dll shift, should call sdhci_o2_dll_recovery
@@ -342,6 +359,14 @@
sdhci_set_bus_width(host, current_bus_width);
}
+ /* Cancel force power mode enter L0 */
+ scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
+ scratch &= ~(O2_SD_PWR_FORCE_L0);
+ sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
+
+ sdhci_reset(host, SDHCI_RESET_CMD);
+ sdhci_reset(host, SDHCI_RESET_DATA);
+
host->flags &= ~SDHCI_HS400_TUNING;
return 0;
}
@@ -369,7 +394,6 @@
scratch_32 |= O2_SD_LED_ENABLE;
pci_write_config_dword(chip->pdev,
O2_SD_TEST_REG, scratch_32);
-
}
static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
@@ -494,9 +518,13 @@
}
}
-void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
+static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
{
u16 clk;
+ u8 scratch;
+ u32 scratch_32;
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct sdhci_pci_chip *chip = slot->chip;
host->mmc->actual_clock = 0;
@@ -505,11 +533,28 @@
if (clock == 0)
return;
+ if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
+
+ if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
+ o2_pci_set_baseclk(chip, 0x2c280000);
+
+ pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ }
+
clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
sdhci_o2_enable_clk(host, clk);
}
-int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
+static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
{
struct sdhci_pci_chip *chip;
struct sdhci_host *host;
@@ -584,7 +629,7 @@
return 0;
}
-int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
+static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
{
int ret;
u8 scratch;
@@ -789,7 +834,7 @@
}
#ifdef CONFIG_PM_SLEEP
-int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
+static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
{
sdhci_pci_o2_probe(chip);
return sdhci_pci_resume_host(chip);
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 779156c..dcd99d5 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -59,6 +59,7 @@
#define PCI_DEVICE_ID_INTEL_JSL_SD 0x4df8
#define PCI_DEVICE_ID_INTEL_LKF_EMMC 0x98c4
#define PCI_DEVICE_ID_INTEL_LKF_SD 0x98f8
+#define PCI_DEVICE_ID_INTEL_ADL_EMMC 0x54c4
#define PCI_DEVICE_ID_SYSKONNECT_8000 0x8000
#define PCI_DEVICE_ID_VIA_95D0 0x95d0
@@ -74,6 +75,7 @@
#define PCI_DEVICE_ID_GLI_9755 0x9755
#define PCI_DEVICE_ID_GLI_9750 0x9750
+#define PCI_DEVICE_ID_GLI_9763E 0xe763
/*
* PCI device class and mask
@@ -165,7 +167,7 @@
bool cd_override_level;
void (*hw_reset)(struct sdhci_host *host);
- unsigned long private[0] ____cacheline_aligned;
+ unsigned long private[] ____cacheline_aligned;
};
struct sdhci_pci_chip {
@@ -197,5 +199,6 @@
extern const struct sdhci_pci_fixes sdhci_o2;
extern const struct sdhci_pci_fixes sdhci_gl9750;
extern const struct sdhci_pci_fixes sdhci_gl9755;
+extern const struct sdhci_pci_fixes sdhci_gl9763e;
#endif /* __SDHCI_PCI_H */
diff --git a/drivers/mmc/host/sdhci-pic32.c b/drivers/mmc/host/sdhci-pic32.c
index a11e639..6ce1519 100644
--- a/drivers/mmc/host/sdhci-pic32.c
+++ b/drivers/mmc/host/sdhci-pic32.c
@@ -241,6 +241,7 @@
static struct platform_driver pic32_sdhci_driver = {
.driver = {
.name = "pic32-sdhci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(pic32_sdhci_id_table),
},
.probe = pic32_sdhci_probe,
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index 2af445b..9bd717f 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -25,7 +25,7 @@
unsigned int clock;
u16 xfer_mode_shadow;
- unsigned long private[0] ____cacheline_aligned;
+ unsigned long private[] ____cacheline_aligned;
};
#ifdef CONFIG_MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
@@ -111,8 +111,13 @@
return host->private;
}
+extern const struct dev_pm_ops sdhci_pltfm_pmops;
+#ifdef CONFIG_PM_SLEEP
int sdhci_pltfm_suspend(struct device *dev);
int sdhci_pltfm_resume(struct device *dev);
-extern const struct dev_pm_ops sdhci_pltfm_pmops;
+#else
+static inline int sdhci_pltfm_suspend(struct device *dev) { return 0; }
+static inline int sdhci_pltfm_resume(struct device *dev) { return 0; }
+#endif
#endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index 9282bc4..f18906b 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -226,6 +226,7 @@
static struct platform_driver sdhci_pxav2_driver = {
.driver = {
.name = "sdhci-pxav2",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(sdhci_pxav2_of_match),
.pm = &sdhci_pltfm_pmops,
},
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e55037c..a6d89a3 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -567,6 +567,7 @@
static struct platform_driver sdhci_pxav3_driver = {
.driver = {
.name = "sdhci-pxav3",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(sdhci_pxav3_of_match),
.pm = &sdhci_pxav3_pmops,
},
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 51e096f..f48a788 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -107,8 +107,11 @@
* @ioarea: The resource created when we claimed the IO area.
* @pdata: The platform data for this controller.
* @cur_clk: The index of the current bus clock.
+ * @ext_cd_irq: External card detect interrupt.
* @clk_io: The clock for the internal bus interface.
+ * @clk_rates: Clock frequencies.
* @clk_bus: The clocks that are available for the SD/MMC bus clock.
+ * @no_divider: No or non-standard internal clock divider.
*/
struct sdhci_s3c {
struct sdhci_host *host;
@@ -117,7 +120,6 @@
struct s3c_sdhci_platdata *pdata;
int cur_clk;
int ext_cd_irq;
- int ext_cd_gpio;
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
@@ -129,6 +131,7 @@
/**
* struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
* @sdhci_quirks: sdhci host specific quirks.
+ * @no_divider: no or non-standard internal clock divider.
*
* Specifies platform specific configuration of sdhci controller.
* Note: A structure for driver specific platform data is used for future
@@ -458,7 +461,9 @@
}
#endif
+#ifdef CONFIG_OF
static const struct of_device_id sdhci_s3c_dt_match[];
+#endif
static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
struct platform_device *pdev)
@@ -481,7 +486,6 @@
struct device *dev = &pdev->dev;
struct sdhci_host *host;
struct sdhci_s3c *sc;
- struct resource *res;
int ret, irq, ptr, clks;
if (!pdev->dev.platform_data && !pdev->dev.of_node) {
@@ -512,7 +516,6 @@
goto err_pdata_io_clk;
} else {
memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
- sc->ext_cd_gpio = -1; /* invalid gpio number */
}
drv_data = sdhci_s3c_get_driver_data(pdev);
@@ -555,8 +558,7 @@
goto err_no_busclks;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->ioaddr)) {
ret = PTR_ERR(host->ioaddr);
goto err_req_regs;
@@ -609,7 +611,7 @@
switch (pdata->max_width) {
case 8:
host->mmc->caps |= MMC_CAP_8_BIT_DATA;
- /* Fall through */
+ fallthrough;
case 4:
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
break;
@@ -784,6 +786,7 @@
.id_table = sdhci_s3c_driver_ids,
.driver = {
.name = "s3c-sdhci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
.pm = &sdhci_s3c_pmops,
},
diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c
index e431432..e9b347b 100644
--- a/drivers/mmc/host/sdhci-sirf.c
+++ b/drivers/mmc/host/sdhci-sirf.c
@@ -194,7 +194,7 @@
* We must request the IRQ after sdhci_add_host(), as the tasklet only
* gets setup in sdhci_add_host() and we oops.
*/
- ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0);
if (ret == -EPROBE_DEFER)
goto err_request_cd;
if (!ret)
@@ -220,6 +220,7 @@
static struct platform_driver sdhci_sirf_driver = {
.driver = {
.name = "sdhci-sirf",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_sirf_of_match,
.pm = &sdhci_pltfm_pmops,
},
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 916b5b0..d463e2f 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -43,7 +43,6 @@
static int sdhci_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
- struct resource *iomem;
struct spear_sdhci *sdhci;
struct device *dev;
int ret;
@@ -56,8 +55,7 @@
goto err;
}
- iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->ioaddr)) {
ret = PTR_ERR(host->ioaddr);
dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
@@ -98,7 +96,7 @@
* It is optional to use GPIOs for sdhci card detection. If we
* find a descriptor using slot GPIO, we use it.
*/
- ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0);
if (ret == -EPROBE_DEFER)
goto disable_clk;
@@ -183,6 +181,7 @@
static struct platform_driver sdhci_driver = {
.driver = {
.name = "sdhci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_pm_ops,
.of_match_table = of_match_ptr(sdhci_spear_id_table),
},
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index a999d20..9cd8862 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include "sdhci-pltfm.h"
+#include "mmc_hsq.h"
/* SDHCI_ARGUMENT2 register high 16bit */
#define SDHCI_SPRD_ARG2_STUFF GENMASK(31, 16)
@@ -379,6 +380,16 @@
return 0;
}
+static void sdhci_sprd_request_done(struct sdhci_host *host,
+ struct mmc_request *mrq)
+{
+ /* Validate if the request was from software queue firstly. */
+ if (mmc_hsq_finalize_request(host->mmc, mrq))
+ return;
+
+ mmc_request_done(host->mmc, mrq);
+}
+
static struct sdhci_ops sdhci_sprd_ops = {
.read_l = sdhci_sprd_readl,
.write_l = sdhci_sprd_writel,
@@ -393,9 +404,11 @@
.hw_reset = sdhci_sprd_hw_reset,
.get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
.get_ro = sdhci_sprd_get_ro,
+ .request_done = sdhci_sprd_request_done,
};
-static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+static void sdhci_sprd_check_auto_cmd23(struct mmc_host *mmc,
+ struct mmc_request *mrq)
{
struct sdhci_host *host = mmc_priv(mmc);
struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
@@ -411,10 +424,23 @@
mrq->sbc && (mrq->sbc->arg & SDHCI_SPRD_ARG2_STUFF) &&
(host->flags & SDHCI_AUTO_CMD23))
host->flags &= ~SDHCI_AUTO_CMD23;
+}
+
+static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ sdhci_sprd_check_auto_cmd23(mmc, mrq);
sdhci_request(mmc, mrq);
}
+static int sdhci_sprd_request_atomic(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ sdhci_sprd_check_auto_cmd23(mmc, mrq);
+
+ return sdhci_request_atomic(mmc, mrq);
+}
+
static int sdhci_sprd_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
@@ -423,7 +449,7 @@
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret) {
+ if (ret < 0) {
pr_err("%s: Switching signalling voltage failed\n",
mmc_hostname(mmc));
return ret;
@@ -445,7 +471,7 @@
break;
default:
- /* fall-through */
+ fallthrough;
case MMC_SIGNAL_VOLTAGE_330:
ret = pinctrl_select_state(sprd_host->pinctrl,
sprd_host->pins_default);
@@ -522,6 +548,7 @@
{
struct sdhci_host *host;
struct sdhci_sprd_host *sprd_host;
+ struct mmc_hsq *hsq;
struct clk *clk;
int ret = 0;
@@ -544,11 +571,17 @@
sdhci_sprd_voltage_switch;
host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_ERASE | MMC_CAP_CMD23;
+ MMC_CAP_WAIT_WHILE_BUSY;
+
ret = mmc_of_parse(host->mmc);
if (ret)
goto pltfm_free;
+ if (!mmc_card_is_removable(host->mmc))
+ host->mmc_host_ops.request_atomic = sdhci_sprd_request_atomic;
+ else
+ host->always_defer_done = true;
+
sprd_host = TO_SPRD_HOST(host);
sdhci_sprd_phy_param_parse(sprd_host, pdev->dev.of_node);
@@ -632,6 +665,16 @@
sprd_host->flags = host->flags;
+ hsq = devm_kzalloc(&pdev->dev, sizeof(*hsq), GFP_KERNEL);
+ if (!hsq) {
+ ret = -ENOMEM;
+ goto err_cleanup_host;
+ }
+
+ ret = mmc_hsq_init(hsq, host->mmc);
+ if (ret)
+ goto err_cleanup_host;
+
ret = __sdhci_add_host(host);
if (ret)
goto err_cleanup_host;
@@ -690,6 +733,7 @@
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
+ mmc_hsq_suspend(host->mmc);
sdhci_runtime_suspend_host(host);
clk_disable_unprepare(sprd_host->clk_sdio);
@@ -718,6 +762,8 @@
goto clk_disable;
sdhci_runtime_resume_host(host, 1);
+ mmc_hsq_resume(host->mmc);
+
return 0;
clk_disable:
@@ -742,6 +788,7 @@
.remove = sdhci_sprd_remove,
.driver = {
.name = "sdhci_sprd_r11",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(sdhci_sprd_of_match),
.pm = &sdhci_sprd_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c
index 1301ceb..4e9ff3e 100644
--- a/drivers/mmc/host/sdhci-st.c
+++ b/drivers/mmc/host/sdhci-st.c
@@ -521,6 +521,7 @@
.remove = sdhci_st_remove,
.driver = {
.name = "sdhci-st",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sdhci_st_pmops,
.of_match_table = of_match_ptr(st_sdhci_match),
},
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index c105356..d50b691 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -45,6 +45,7 @@
#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT 8
#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
+#define SDHCI_MISC_CTRL_ERASE_TIMEOUT_LIMIT BIT(0)
#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20
@@ -95,7 +96,16 @@
#define NVQUIRK_ENABLE_SDR50 BIT(3)
#define NVQUIRK_ENABLE_SDR104 BIT(4)
#define NVQUIRK_ENABLE_DDR50 BIT(5)
+/*
+ * HAS_PADCALIB NVQUIRK is for SoC's supporting auto calibration of pads
+ * drive strength.
+ */
#define NVQUIRK_HAS_PADCALIB BIT(6)
+/*
+ * NEEDS_PAD_CONTROL NVQUIRK is for SoC's having separate 3V3 and 1V8 pads.
+ * 3V3/1V8 pad selection happens through pinctrl state selection depending
+ * on the signaling mode.
+ */
#define NVQUIRK_NEEDS_PAD_CONTROL BIT(7)
#define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8)
#define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING BIT(9)
@@ -109,6 +119,10 @@
/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
#define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000
+#define SDHCI_TEGRA_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
+ SDHCI_TRNS_BLK_CNT_EN | \
+ SDHCI_TRNS_DMA)
+
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
u64 dma_mask;
@@ -340,23 +354,6 @@
}
}
-static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
- struct mmc_ios *ios)
-{
- struct sdhci_host *host = mmc_priv(mmc);
- u32 val;
-
- val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
-
- if (ios->enhanced_strobe)
- val |= SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
- else
- val &= ~SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
-
- sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
-
-}
-
static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -611,6 +608,39 @@
autocal->pull_down_1v8 = 0;
err = device_property_read_u32(host->mmc->parent,
+ "nvidia,pad-autocal-pull-up-offset-sdr104",
+ &autocal->pull_up_sdr104);
+ if (err)
+ autocal->pull_up_sdr104 = autocal->pull_up_1v8;
+
+ err = device_property_read_u32(host->mmc->parent,
+ "nvidia,pad-autocal-pull-down-offset-sdr104",
+ &autocal->pull_down_sdr104);
+ if (err)
+ autocal->pull_down_sdr104 = autocal->pull_down_1v8;
+
+ err = device_property_read_u32(host->mmc->parent,
+ "nvidia,pad-autocal-pull-up-offset-hs400",
+ &autocal->pull_up_hs400);
+ if (err)
+ autocal->pull_up_hs400 = autocal->pull_up_1v8;
+
+ err = device_property_read_u32(host->mmc->parent,
+ "nvidia,pad-autocal-pull-down-offset-hs400",
+ &autocal->pull_down_hs400);
+ if (err)
+ autocal->pull_down_hs400 = autocal->pull_down_1v8;
+
+ /*
+ * Different fail-safe drive strength values based on the signaling
+ * voltage are applicable for SoCs supporting 3V3 and 1V8 pad controls.
+ * So, avoid reading below device tree properties for SoCs that don't
+ * have NVQUIRK_NEEDS_PAD_CONTROL.
+ */
+ if (!(tegra_host->soc_data->nvquirks & NVQUIRK_NEEDS_PAD_CONTROL))
+ return;
+
+ err = device_property_read_u32(host->mmc->parent,
"nvidia,pad-autocal-pull-up-offset-3v3-timeout",
&autocal->pull_up_3v3_timeout);
if (err) {
@@ -653,30 +683,6 @@
mmc_hostname(host->mmc));
autocal->pull_down_1v8_timeout = 0;
}
-
- err = device_property_read_u32(host->mmc->parent,
- "nvidia,pad-autocal-pull-up-offset-sdr104",
- &autocal->pull_up_sdr104);
- if (err)
- autocal->pull_up_sdr104 = autocal->pull_up_1v8;
-
- err = device_property_read_u32(host->mmc->parent,
- "nvidia,pad-autocal-pull-down-offset-sdr104",
- &autocal->pull_down_sdr104);
- if (err)
- autocal->pull_down_sdr104 = autocal->pull_down_1v8;
-
- err = device_property_read_u32(host->mmc->parent,
- "nvidia,pad-autocal-pull-up-offset-hs400",
- &autocal->pull_up_hs400);
- if (err)
- autocal->pull_up_hs400 = autocal->pull_up_1v8;
-
- err = device_property_read_u32(host->mmc->parent,
- "nvidia,pad-autocal-pull-down-offset-hs400",
- &autocal->pull_down_hs400);
- if (err)
- autocal->pull_down_hs400 = autocal->pull_down_1v8;
}
static void tegra_sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
@@ -768,6 +774,32 @@
}
}
+static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 val;
+
+ val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
+
+ if (ios->enhanced_strobe) {
+ val |= SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
+ /*
+ * When CMD13 is sent from mmc_select_hs400es() after
+ * switching to HS400ES mode, the bus is operating at
+ * either MMC_HIGH_26_MAX_DTR or MMC_HIGH_52_MAX_DTR.
+ * To meet Tegra SDHCI requirement at HS400ES mode, force SDHCI
+ * interface clock to MMC_HS200_MAX_DTR (200 MHz) so that host
+ * controller CAR clock and the interface clock are rate matched.
+ */
+ tegra_sdhci_set_clock(host, MMC_HS200_MAX_DTR);
+ } else {
+ val &= ~SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
+ }
+
+ sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
+}
+
static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1137,6 +1169,7 @@
static void tegra_cqhci_writel(struct cqhci_host *cq_host, u32 val, int reg)
{
struct mmc_host *mmc = cq_host->mmc;
+ struct sdhci_host *host = mmc_priv(mmc);
u8 ctrl;
ktime_t timeout;
bool timed_out;
@@ -1151,6 +1184,7 @@
*/
if (reg == CQHCI_CTL && !(val & CQHCI_HALT) &&
cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) {
+ sdhci_writew(host, SDHCI_TEGRA_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
sdhci_cqe_enable(mmc);
writel(val, cq_host->mmio + reg);
timeout = ktime_add_us(ktime_get(), 50);
@@ -1186,6 +1220,7 @@
static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
{
struct cqhci_host *cq_host = mmc->cqe_private;
+ struct sdhci_host *host = mmc_priv(mmc);
u32 val;
/*
@@ -1199,6 +1234,7 @@
if (val & CQHCI_ENABLE)
cqhci_writel(cq_host, (val & ~CQHCI_ENABLE),
CQHCI_CFG);
+ sdhci_writew(host, SDHCI_TEGRA_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
sdhci_cqe_enable(mmc);
if (val & CQHCI_ENABLE)
cqhci_writel(cq_host, val, CQHCI_CFG);
@@ -1234,12 +1270,64 @@
return 0;
}
+static void tegra_sdhci_set_timeout(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ u32 val;
+
+ /*
+ * HW busy detection timeout is based on programmed data timeout
+ * counter and maximum supported timeout is 11s which may not be
+ * enough for long operations like cache flush, sleep awake, erase.
+ *
+ * ERASE_TIMEOUT_LIMIT bit of VENDOR_MISC_CTRL register allows
+ * host controller to wait for busy state until the card is busy
+ * without HW timeout.
+ *
+ * So, use infinite busy wait mode for operations that may take
+ * more than maximum HW busy timeout of 11s otherwise use finite
+ * busy wait mode.
+ */
+ val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+ if (cmd && cmd->busy_timeout >= 11 * MSEC_PER_SEC)
+ val |= SDHCI_MISC_CTRL_ERASE_TIMEOUT_LIMIT;
+ else
+ val &= ~SDHCI_MISC_CTRL_ERASE_TIMEOUT_LIMIT;
+ sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+
+ __sdhci_set_timeout(host, cmd);
+}
+
+static void sdhci_tegra_cqe_pre_enable(struct mmc_host *mmc)
+{
+ struct cqhci_host *cq_host = mmc->cqe_private;
+ u32 reg;
+
+ reg = cqhci_readl(cq_host, CQHCI_CFG);
+ reg |= CQHCI_ENABLE;
+ cqhci_writel(cq_host, reg, CQHCI_CFG);
+}
+
+static void sdhci_tegra_cqe_post_disable(struct mmc_host *mmc)
+{
+ struct cqhci_host *cq_host = mmc->cqe_private;
+ struct sdhci_host *host = mmc_priv(mmc);
+ u32 reg;
+
+ reg = cqhci_readl(cq_host, CQHCI_CFG);
+ reg &= ~CQHCI_ENABLE;
+ cqhci_writel(cq_host, reg, CQHCI_CFG);
+ sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
+}
+
static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
.write_l = tegra_cqhci_writel,
.enable = sdhci_tegra_cqe_enable,
.disable = sdhci_cqe_disable,
.dumpregs = sdhci_tegra_dumpregs,
.update_dcmd_desc = sdhci_tegra_update_dcmd_desc,
+ .pre_enable = sdhci_tegra_cqe_pre_enable,
+ .post_disable = sdhci_tegra_cqe_post_disable,
};
static int tegra_sdhci_set_dma_mask(struct sdhci_host *host)
@@ -1373,6 +1461,7 @@
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
+ .set_timeout = tegra_sdhci_set_timeout,
};
static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
@@ -1410,6 +1499,7 @@
.voltage_switch = tegra_sdhci_voltage_switch,
.get_max_clock = tegra_sdhci_get_max_clock,
.irq = sdhci_tegra_cqhci_irq,
+ .set_timeout = tegra_sdhci_set_timeout,
};
static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
@@ -1560,8 +1650,8 @@
if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
host->mmc->caps |= MMC_CAP_1_8V_DDR;
- /* R1B responses is required to properly manage HW busy detection. */
- host->mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
+ /* HW busy detection is supported, but R1B responses are required. */
+ host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY;
tegra_sdhci_parse_dt(host);
@@ -1611,11 +1701,8 @@
clk = devm_clk_get(mmc_dev(host->mmc), NULL);
if (IS_ERR(clk)) {
- rc = PTR_ERR(clk);
-
- if (rc != -EPROBE_DEFER)
- dev_err(&pdev->dev, "failed to get clock: %d\n", rc);
-
+ rc = dev_err_probe(&pdev->dev, PTR_ERR(clk),
+ "failed to get clock\n");
goto err_clk_get;
}
clk_prepare_enable(clk);
@@ -1736,6 +1823,7 @@
static struct platform_driver sdhci_tegra_driver = {
.driver = {
.name = "sdhci-tegra",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_tegra_dt_match,
.pm = &sdhci_tegra_dev_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index e6e9e28..03ce57e 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -527,7 +527,7 @@
ret = true;
break;
}
- /* fall through */
+ fallthrough;
default:
reg &= ~XENON_TIMING_ADJUST_SLOW_MODE;
ret = false;
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 5f57e78..0e5234a 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -682,6 +682,7 @@
static struct platform_driver sdhci_xenon_driver = {
.driver = {
.name = "xenon-sdhci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_xenon_dt_ids,
.pm = &sdhci_xenon_dev_pm_ops,
},
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 2ecd9ac..d42e86c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -9,7 +9,9 @@
* - JMicron (hardware and technical support)
*/
+#include <linux/bitfield.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
#include <linux/ktime.h>
#include <linux/highmem.h>
#include <linux/io.h>
@@ -46,10 +48,10 @@
static unsigned int debug_quirks = 0;
static unsigned int debug_quirks2;
-static void sdhci_finish_data(struct sdhci_host *);
-
static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
+
void sdhci_dumpregs(struct sdhci_host *host)
{
SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n");
@@ -109,6 +111,9 @@
}
}
+ if (host->ops->dump_vendor_regs)
+ host->ops->dump_vendor_regs(host);
+
SDHCI_DUMP("============================================\n");
}
EXPORT_SYMBOL_GPL(sdhci_dumpregs);
@@ -315,6 +320,7 @@
static void sdhci_init(struct sdhci_host *host, int soft)
{
struct mmc_host *mmc = host->mmc;
+ unsigned long flags;
if (soft)
sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
@@ -324,7 +330,9 @@
if (host->v4_mode)
sdhci_do_enable_v4_mode(host);
+ spin_lock_irqsave(&host->lock, flags);
sdhci_set_default_irqs(host);
+ spin_unlock_irqrestore(&host->lock, flags);
host->cqe_on = false;
@@ -337,8 +345,19 @@
static void sdhci_reinit(struct sdhci_host *host)
{
+ u32 cd = host->ier & (SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
+
sdhci_init(host, 0);
sdhci_enable_card_detection(host);
+
+ /*
+ * A change to the card detect bits indicates a change in present state,
+ * refer sdhci_set_card_detection(). A card detect interrupt might have
+ * been missed while the host controller was being reset, so trigger a
+ * rescan to check.
+ */
+ if (cd != (host->ier & (SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT)))
+ mmc_detect_change(host->mmc, msecs_to_jiffies(200));
}
static void __sdhci_led_activate(struct sdhci_host *host)
@@ -474,7 +493,7 @@
{
unsigned long flags;
size_t blksize, len, chunk;
- u32 uninitialized_var(scratch);
+ u32 scratch;
u8 *buf;
DBG("PIO reading\n");
@@ -621,9 +640,13 @@
}
if (mmc_get_dma_dir(data) == DMA_TO_DEVICE) {
/* Copy the data to the bounce buffer */
- sg_copy_to_buffer(data->sg, data->sg_len,
- host->bounce_buffer,
- length);
+ if (host->ops->copy_to_bounce_buffer) {
+ host->ops->copy_to_bounce_buffer(host,
+ data, length);
+ } else {
+ sg_copy_to_buffer(data->sg, data->sg_len,
+ host->bounce_buffer, length);
+ }
}
/* Switch ownership to the DMA */
dma_sync_single_for_device(host->mmc->parent,
@@ -749,7 +772,19 @@
len -= offset;
}
- BUG_ON(len > 65536);
+ /*
+ * The block layer forces a minimum segment size of PAGE_SIZE,
+ * so 'len' can be too big here if PAGE_SIZE >= 64KiB. Write
+ * multiple descriptors, noting that the ADMA table is sized
+ * for 4KiB chunks anyway, so it will be big enough.
+ */
+ while (len > host->max_adma) {
+ int n = 32 * 1024; /* 32KiB*/
+
+ __sdhci_adma_write_desc(host, &desc, addr, n, ADMA2_TRAN_VALID);
+ addr += n;
+ len -= n;
+ }
/* tran, valid */
if (len)
@@ -1017,18 +1052,9 @@
__sdhci_set_timeout(host, cmd);
}
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+static void sdhci_initialize_data(struct sdhci_host *host,
+ struct mmc_data *data)
{
- struct mmc_data *data = cmd->data;
-
- host->data_timeout = 0;
-
- if (sdhci_data_line_cmd(cmd))
- sdhci_set_timeout(host, cmd);
-
- if (!data)
- return;
-
WARN_ON(host->data);
/* Sanity checks */
@@ -1039,6 +1065,34 @@
host->data = data;
host->data_early = 0;
host->data->bytes_xfered = 0;
+}
+
+static inline void sdhci_set_block_info(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ /* Set the DMA boundary value and block size */
+ sdhci_writew(host,
+ SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
+ SDHCI_BLOCK_SIZE);
+ /*
+ * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
+ * can be supported, in that case 16-bit block count register must be 0.
+ */
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+ (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
+ if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
+ sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+ } else {
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ }
+}
+
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ sdhci_initialize_data(host, data);
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
struct scatterlist *sg;
@@ -1125,24 +1179,193 @@
sdhci_set_transfer_irqs(host);
- /* Set the DMA boundary value and block size */
- sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
- SDHCI_BLOCK_SIZE);
+ sdhci_set_block_info(host, data);
+}
- /*
- * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
- * can be supported, in that case 16-bit block count register must be 0.
- */
- if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
- (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
- if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
- sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
- sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
+
+static int sdhci_external_dma_init(struct sdhci_host *host)
+{
+ int ret = 0;
+ struct mmc_host *mmc = host->mmc;
+
+ host->tx_chan = dma_request_chan(mmc->parent, "tx");
+ if (IS_ERR(host->tx_chan)) {
+ ret = PTR_ERR(host->tx_chan);
+ if (ret != -EPROBE_DEFER)
+ pr_warn("Failed to request TX DMA channel.\n");
+ host->tx_chan = NULL;
+ return ret;
+ }
+
+ host->rx_chan = dma_request_chan(mmc->parent, "rx");
+ if (IS_ERR(host->rx_chan)) {
+ if (host->tx_chan) {
+ dma_release_channel(host->tx_chan);
+ host->tx_chan = NULL;
+ }
+
+ ret = PTR_ERR(host->rx_chan);
+ if (ret != -EPROBE_DEFER)
+ pr_warn("Failed to request RX DMA channel.\n");
+ host->rx_chan = NULL;
+ }
+
+ return ret;
+}
+
+static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
+}
+
+static int sdhci_external_dma_setup(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ int ret, i;
+ enum dma_transfer_direction dir;
+ struct dma_async_tx_descriptor *desc;
+ struct mmc_data *data = cmd->data;
+ struct dma_chan *chan;
+ struct dma_slave_config cfg;
+ dma_cookie_t cookie;
+ int sg_cnt;
+
+ if (!host->mapbase)
+ return -EINVAL;
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.src_addr = host->mapbase + SDHCI_BUFFER;
+ cfg.dst_addr = host->mapbase + SDHCI_BUFFER;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_maxburst = data->blksz / 4;
+ cfg.dst_maxburst = data->blksz / 4;
+
+ /* Sanity check: all the SG entries must be aligned by block size. */
+ for (i = 0; i < data->sg_len; i++) {
+ if ((data->sg + i)->length % data->blksz)
+ return -EINVAL;
+ }
+
+ chan = sdhci_external_dma_channel(host, data);
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret)
+ return ret;
+
+ sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
+ if (sg_cnt <= 0)
+ return -EINVAL;
+
+ dir = data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+ desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len, dir,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ desc->callback = NULL;
+ desc->callback_param = NULL;
+
+ cookie = dmaengine_submit(desc);
+ if (dma_submit_error(cookie))
+ ret = cookie;
+
+ return ret;
+}
+
+static void sdhci_external_dma_release(struct sdhci_host *host)
+{
+ if (host->tx_chan) {
+ dma_release_channel(host->tx_chan);
+ host->tx_chan = NULL;
+ }
+
+ if (host->rx_chan) {
+ dma_release_channel(host->rx_chan);
+ host->rx_chan = NULL;
+ }
+
+ sdhci_switch_external_dma(host, false);
+}
+
+static void __sdhci_external_dma_prepare_data(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ struct mmc_data *data = cmd->data;
+
+ sdhci_initialize_data(host, data);
+
+ host->flags |= SDHCI_REQ_USE_DMA;
+ sdhci_set_transfer_irqs(host);
+
+ sdhci_set_block_info(host, data);
+}
+
+static void sdhci_external_dma_prepare_data(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ if (!sdhci_external_dma_setup(host, cmd)) {
+ __sdhci_external_dma_prepare_data(host, cmd);
} else {
- sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ sdhci_external_dma_release(host);
+ pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n",
+ mmc_hostname(host->mmc));
+ sdhci_prepare_data(host, cmd);
}
}
+static void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ struct dma_chan *chan;
+
+ if (!cmd->data)
+ return;
+
+ chan = sdhci_external_dma_channel(host, cmd->data);
+ if (chan)
+ dma_async_issue_pending(chan);
+}
+
+#else
+
+static inline int sdhci_external_dma_init(struct sdhci_host *host)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline void sdhci_external_dma_release(struct sdhci_host *host)
+{
+}
+
+static inline void sdhci_external_dma_prepare_data(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ /* This should never happen */
+ WARN_ON_ONCE(1);
+}
+
+static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+}
+
+static inline struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ return NULL;
+}
+
+#endif
+
+void sdhci_switch_external_dma(struct sdhci_host *host, bool en)
+{
+ host->use_external_dma = en;
+}
+EXPORT_SYMBOL_GPL(sdhci_switch_external_dma);
+
static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
struct mmc_request *mrq)
{
@@ -1150,13 +1373,25 @@
!mrq->cap_cmd_during_tfr;
}
+static inline bool sdhci_auto_cmd23(struct sdhci_host *host,
+ struct mmc_request *mrq)
+{
+ return mrq->sbc && (host->flags & SDHCI_AUTO_CMD23);
+}
+
+static inline bool sdhci_manual_cmd23(struct sdhci_host *host,
+ struct mmc_request *mrq)
+{
+ return mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23);
+}
+
static inline void sdhci_auto_cmd_select(struct sdhci_host *host,
struct mmc_command *cmd,
u16 *mode)
{
bool use_cmd12 = sdhci_auto_cmd12(host, cmd->mrq) &&
(cmd->opcode != SD_IO_RW_EXTENDED);
- bool use_cmd23 = cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23);
+ bool use_cmd23 = sdhci_auto_cmd23(host, cmd->mrq);
u16 ctrl2;
/*
@@ -1218,7 +1453,7 @@
if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
sdhci_auto_cmd_select(host, cmd, &mode);
- if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23))
+ if (sdhci_auto_cmd23(host, cmd->mrq))
sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);
}
@@ -1239,22 +1474,10 @@
(host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)));
}
-static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
+static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
{
int i;
- if (host->cmd && host->cmd->mrq == mrq)
- host->cmd = NULL;
-
- if (host->data_cmd && host->data_cmd->mrq == mrq)
- host->data_cmd = NULL;
-
- if (host->data && host->data->mrq == mrq)
- host->data = NULL;
-
- if (sdhci_needs_reset(host, mrq))
- host->pending_reset = true;
-
for (i = 0; i < SDHCI_MAX_MRQS; i++) {
if (host->mrqs_done[i] == mrq) {
WARN_ON(1);
@@ -1270,6 +1493,26 @@
}
WARN_ON(i >= SDHCI_MAX_MRQS);
+}
+
+static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
+{
+ if (host->cmd && host->cmd->mrq == mrq)
+ host->cmd = NULL;
+
+ if (host->data_cmd && host->data_cmd->mrq == mrq)
+ host->data_cmd = NULL;
+
+ if (host->deferred_cmd && host->deferred_cmd->mrq == mrq)
+ host->deferred_cmd = NULL;
+
+ if (host->data && host->data->mrq == mrq)
+ host->data = NULL;
+
+ if (sdhci_needs_reset(host, mrq))
+ host->pending_reset = true;
+
+ sdhci_set_mrq_done(host, mrq);
sdhci_del_timer(host, mrq);
@@ -1284,7 +1527,7 @@
queue_work(host->complete_wq, &host->complete_work);
}
-static void sdhci_finish_data(struct sdhci_host *host)
+static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
{
struct mmc_command *data_cmd = host->data_cmd;
struct mmc_data *data = host->data;
@@ -1320,12 +1563,12 @@
/*
* Need to send CMD12 if -
- * a) open-ended multiblock transfer (no CMD23)
+ * a) open-ended multiblock transfer not using auto CMD12 (no CMD23)
* b) error in multiblock transfer
*/
if (data->stop &&
- (data->error ||
- !data->mrq->sbc)) {
+ ((!data->mrq->sbc && !sdhci_auto_cmd12(host, data->mrq)) ||
+ data->error)) {
/*
* 'cap_cmd_during_tfr' request must not use the command line
* after mmc_command_done() has been called. It is upper layer's
@@ -1336,14 +1579,31 @@
} else {
/* Avoid triggering warning in sdhci_send_command() */
host->cmd = NULL;
- sdhci_send_command(host, data->stop);
+ if (!sdhci_send_command(host, data->stop)) {
+ if (sw_data_timeout) {
+ /*
+ * This is anyway a sw data timeout, so
+ * give up now.
+ */
+ data->stop->error = -EIO;
+ __sdhci_finish_mrq(host, data->mrq);
+ } else {
+ WARN_ON(host->deferred_cmd);
+ host->deferred_cmd = data->stop;
+ }
+ }
}
} else {
__sdhci_finish_mrq(host, data->mrq);
}
}
-void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+static void sdhci_finish_data(struct sdhci_host *host)
+{
+ __sdhci_finish_data(host, false);
+}
+
+static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
u32 mask;
@@ -1358,9 +1618,6 @@
cmd->opcode == MMC_STOP_TRANSMISSION)
cmd->flags |= MMC_RSP_BUSY;
- /* Wait max 10 ms */
- timeout = 10;
-
mask = SDHCI_CMD_INHIBIT;
if (sdhci_data_line_cmd(cmd))
mask |= SDHCI_DATA_INHIBIT;
@@ -1370,37 +1627,36 @@
if (cmd->mrq->data && (cmd == cmd->mrq->data->stop))
mask &= ~SDHCI_DATA_INHIBIT;
- while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
- if (timeout == 0) {
- pr_err("%s: Controller never released inhibit bit(s).\n",
- mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
- cmd->error = -EIO;
- sdhci_finish_mrq(host, cmd->mrq);
- return;
- }
- timeout--;
- mdelay(1);
- }
+ if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)
+ return false;
host->cmd = cmd;
+ host->data_timeout = 0;
if (sdhci_data_line_cmd(cmd)) {
WARN_ON(host->data_cmd);
host->data_cmd = cmd;
+ sdhci_set_timeout(host, cmd);
}
- sdhci_prepare_data(host, cmd);
+ if (cmd->data) {
+ if (host->use_external_dma)
+ sdhci_external_dma_prepare_data(host, cmd);
+ else
+ sdhci_prepare_data(host, cmd);
+ }
sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- pr_err("%s: Unsupported response type!\n",
- mmc_hostname(host->mmc));
- cmd->error = -EINVAL;
- sdhci_finish_mrq(host, cmd->mrq);
- return;
+ WARN_ONCE(1, "Unsupported response type!\n");
+ /*
+ * This does not happen in practice because 136-bit response
+ * commands never have busy waiting, so rather than complicate
+ * the error path, just remove busy waiting and continue.
+ */
+ cmd->flags &= ~MMC_RSP_BUSY;
}
if (!(cmd->flags & MMC_RSP_PRESENT))
@@ -1431,9 +1687,65 @@
timeout += 10 * HZ;
sdhci_mod_timer(host, cmd->mrq, timeout);
+ if (host->use_external_dma)
+ sdhci_external_dma_pre_transfer(host, cmd);
+
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+
+ return true;
}
-EXPORT_SYMBOL_GPL(sdhci_send_command);
+
+static bool sdhci_present_error(struct sdhci_host *host,
+ struct mmc_command *cmd, bool present)
+{
+ if (!present || host->flags & SDHCI_DEVICE_DEAD) {
+ cmd->error = -ENOMEDIUM;
+ return true;
+ }
+
+ return false;
+}
+
+static bool sdhci_send_command_retry(struct sdhci_host *host,
+ struct mmc_command *cmd,
+ unsigned long flags)
+ __releases(host->lock)
+ __acquires(host->lock)
+{
+ struct mmc_command *deferred_cmd = host->deferred_cmd;
+ int timeout = 10; /* Approx. 10 ms */
+ bool present;
+
+ while (!sdhci_send_command(host, cmd)) {
+ if (!timeout--) {
+ pr_err("%s: Controller never released inhibit bit(s).\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ cmd->error = -EIO;
+ return false;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ usleep_range(1000, 1250);
+
+ present = host->mmc->ops->get_cd(host->mmc);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* A deferred command might disappear, handle that */
+ if (cmd == deferred_cmd && cmd != host->deferred_cmd)
+ return true;
+
+ if (sdhci_present_error(host, cmd, present))
+ return false;
+ }
+
+ if (cmd == host->deferred_cmd)
+ host->deferred_cmd = NULL;
+
+ return true;
+}
static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd)
{
@@ -1494,7 +1806,10 @@
/* Finished CMD23, now send actual command. */
if (cmd == cmd->mrq->sbc) {
- sdhci_send_command(host, cmd->mrq->cmd);
+ if (!sdhci_send_command(host, cmd->mrq->cmd)) {
+ WARN_ON(host->deferred_cmd);
+ host->deferred_cmd = cmd->mrq->cmd;
+ }
} else {
/* Processed actual command. */
@@ -1558,10 +1873,9 @@
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
pre_val = sdhci_get_preset_value(host);
- div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
- >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
+ div = FIELD_GET(SDHCI_PRESET_SDCLK_FREQ_MASK, pre_val);
if (host->clk_mul &&
- (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
+ (pre_val & SDHCI_PRESET_CLKGEN_SEL)) {
clk = SDHCI_PROG_CLOCK_MODE;
real_div = div + 1;
clk_mul = host->clk_mul;
@@ -1741,6 +2055,12 @@
break;
case MMC_VDD_32_33:
case MMC_VDD_33_34:
+ /*
+ * 3.4 ~ 3.6V are valid only for those platforms where it's
+ * known that the voltage range is supported by hardware.
+ */
+ case MMC_VDD_34_35:
+ case MMC_VDD_35_36:
pwr = SDHCI_POWER_330;
break;
default:
@@ -1802,6 +2122,25 @@
}
EXPORT_SYMBOL_GPL(sdhci_set_power);
+/*
+ * Some controllers need to configure a valid bus voltage on their power
+ * register regardless of whether an external regulator is taking care of power
+ * supply. This helper function takes care of it if set as the controller's
+ * sdhci_ops.set_power callback.
+ */
+void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
+ unsigned char mode,
+ unsigned short vdd)
+{
+ if (!IS_ERR(host->mmc->supply.vmmc)) {
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ }
+ sdhci_set_power_noreg(host, mode, vdd);
+}
+EXPORT_SYMBOL_GPL(sdhci_set_power_and_bus_voltage);
+
/*****************************************************************************\
* *
* MMC callbacks *
@@ -1810,11 +2149,10 @@
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
- struct sdhci_host *host;
- int present;
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd;
unsigned long flags;
-
- host = mmc_priv(mmc);
+ bool present;
/* Firstly check card presence */
present = mmc->ops->get_cd(mmc);
@@ -1823,31 +2161,58 @@
sdhci_led_activate(host);
- /*
- * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
- * requests if Auto-CMD12 is enabled.
- */
- if (sdhci_auto_cmd12(host, mrq)) {
- if (mrq->stop) {
- mrq->data->stop = NULL;
- mrq->stop = NULL;
- }
- }
+ if (sdhci_present_error(host, mrq->cmd, present))
+ goto out_finish;
- if (!present || host->flags & SDHCI_DEVICE_DEAD) {
- mrq->cmd->error = -ENOMEDIUM;
- sdhci_finish_mrq(host, mrq);
- } else {
- if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
- sdhci_send_command(host, mrq->sbc);
- else
- sdhci_send_command(host, mrq->cmd);
- }
+ cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
+ if (!sdhci_send_command_retry(host, cmd, flags))
+ goto out_finish;
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return;
+
+out_finish:
+ sdhci_finish_mrq(host, mrq);
spin_unlock_irqrestore(&host->lock, flags);
}
EXPORT_SYMBOL_GPL(sdhci_request);
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (sdhci_present_error(host, mrq->cmd, true)) {
+ sdhci_finish_mrq(host, mrq);
+ goto out_finish;
+ }
+
+ cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
+
+ /*
+ * The HSQ may send a command in interrupt context without polling
+ * the busy signaling, which means we should return BUSY if controller
+ * has not released inhibit bits to allow HSQ trying to send request
+ * again in non-atomic context. So we should not finish this request
+ * here.
+ */
+ if (!sdhci_send_command(host, cmd))
+ ret = -EBUSY;
+ else
+ sdhci_led_activate(host);
+
+out_finish:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_request_atomic);
+
void sdhci_set_bus_width(struct sdhci_host *host, int width)
{
u8 ctrl;
@@ -2030,8 +2395,8 @@
sdhci_enable_preset_value(host, true);
preset = sdhci_get_preset_value(host);
- ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
- >> SDHCI_PRESET_DRV_SHIFT;
+ ios->drv_type = FIELD_GET(SDHCI_PRESET_DRV_MASK,
+ preset);
}
/* Re-enable SD Clock */
@@ -2195,7 +2560,7 @@
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret) {
+ if (ret < 0) {
pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
mmc_hostname(mmc));
return -EIO;
@@ -2209,7 +2574,7 @@
if (!(ctrl & SDHCI_CTRL_VDD_180))
return 0;
- pr_warn("%s: 3.3V regulator output did not became stable\n",
+ pr_warn("%s: 3.3V regulator output did not become stable\n",
mmc_hostname(mmc));
return -EAGAIN;
@@ -2218,7 +2583,7 @@
return -EINVAL;
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret) {
+ if (ret < 0) {
pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
mmc_hostname(mmc));
return -EIO;
@@ -2241,7 +2606,7 @@
if (ctrl & SDHCI_CTRL_VDD_180)
return 0;
- pr_warn("%s: 1.8V regulator output did not became stable\n",
+ pr_warn("%s: 1.8V regulator output did not become stable\n",
mmc_hostname(mmc));
return -EAGAIN;
@@ -2250,7 +2615,7 @@
return -EINVAL;
if (!IS_ERR(mmc->supply.vqmmc)) {
ret = mmc_regulator_set_vqmmc(mmc, ios);
- if (ret) {
+ if (ret < 0) {
pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
mmc_hostname(mmc));
return -EIO;
@@ -2384,7 +2749,11 @@
*/
sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
- sdhci_send_command(host, &cmd);
+ if (!sdhci_send_command_retry(host, &cmd, flags)) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ host->tuning_done = 0;
+ return;
+ }
host->cmd = NULL;
@@ -2481,7 +2850,7 @@
case MMC_TIMING_UHS_SDR50:
if (host->flags & SDHCI_SDR50_NEEDS_TUNING)
break;
- /* FALLTHROUGH */
+ fallthrough;
default:
goto out;
@@ -2690,6 +3059,17 @@
if (host->flags & SDHCI_REQ_USE_DMA) {
struct mmc_data *data = mrq->data;
+ if (host->use_external_dma && data &&
+ (mrq->cmd->error || data->error)) {
+ struct dma_chan *chan = sdhci_external_dma_channel(host, data);
+
+ host->mrqs_done[i] = NULL;
+ spin_unlock_irqrestore(&host->lock, flags);
+ dmaengine_terminate_sync(chan);
+ spin_lock_irqsave(&host->lock, flags);
+ sdhci_set_mrq_done(host, mrq);
+ }
+
if (data && data->host_cookie == COOKIE_MAPPED) {
if (host->bounce_buffer) {
/*
@@ -2738,7 +3118,10 @@
spin_unlock_irqrestore(&host->lock, flags);
- mmc_request_done(host->mmc, mrq);
+ if (host->ops->request_done)
+ host->ops->request_done(host, mrq);
+ else
+ mmc_request_done(host->mmc, mrq);
return false;
}
@@ -2790,7 +3173,7 @@
if (host->data) {
host->data->error = -ETIMEDOUT;
- sdhci_finish_data(host);
+ __sdhci_finish_data(host, true);
queue_work(host->complete_wq, &host->complete_work);
} else if (host->data_cmd) {
host->data_cmd->error = -ETIMEDOUT;
@@ -3041,7 +3424,7 @@
{
struct mmc_data *data = mrq->data;
- return host->pending_reset ||
+ return host->pending_reset || host->always_defer_done ||
((host->flags & SDHCI_REQ_USE_DMA) && data &&
data->host_cookie == COOKIE_MAPPED);
}
@@ -3162,11 +3545,19 @@
}
}
out:
+ if (host->deferred_cmd)
+ result = IRQ_WAKE_THREAD;
+
spin_unlock(&host->lock);
/* Process mrqs ready for immediate completion */
for (i = 0; i < SDHCI_MAX_MRQS; i++) {
- if (mrqs_done[i])
+ if (!mrqs_done[i])
+ continue;
+
+ if (host->ops->request_done)
+ host->ops->request_done(host, mrqs_done[i]);
+ else
mmc_request_done(host->mmc, mrqs_done[i]);
}
@@ -3182,6 +3573,7 @@
static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
{
struct sdhci_host *host = dev_id;
+ struct mmc_command *cmd;
unsigned long flags;
u32 isr;
@@ -3189,8 +3581,14 @@
;
spin_lock_irqsave(&host->lock, flags);
+
isr = host->thread_isr;
host->thread_isr = 0;
+
+ cmd = host->deferred_cmd;
+ if (cmd && !sdhci_send_command_retry(host, cmd, flags))
+ sdhci_finish_mrq(host, cmd->mrq);
+
spin_unlock_irqrestore(&host->lock, flags);
if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
@@ -3562,6 +3960,7 @@
* descriptor for each segment, plus 1 for a nop end descriptor.
*/
host->adma_table_cnt = SDHCI_MAX_SEGS * 2 + 1;
+ host->max_adma = 65536;
return host;
}
@@ -3621,10 +4020,10 @@
if (host->v4_mode)
sdhci_do_enable_v4_mode(host);
- of_property_read_u64(mmc_dev(host->mmc)->of_node,
- "sdhci-caps-mask", &dt_caps_mask);
- of_property_read_u64(mmc_dev(host->mmc)->of_node,
- "sdhci-caps", &dt_caps);
+ device_property_read_u64_array(mmc_dev(host->mmc),
+ "sdhci-caps-mask", &dt_caps_mask, 1);
+ device_property_read_u64_array(mmc_dev(host->mmc),
+ "sdhci-caps", &dt_caps, 1);
v = ver ? *ver : sdhci_readw(host, SDHCI_HOST_VERSION);
host->version = (v & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
@@ -3733,7 +4132,8 @@
unsigned int ocr_avail;
unsigned int override_timeout_clk;
u32 max_clk;
- int ret;
+ int ret = 0;
+ bool enable_vqmmc = false;
WARN_ON(host == NULL);
if (host == NULL)
@@ -3747,9 +4147,12 @@
* the host can take the appropriate action if regulators are not
* available.
*/
- ret = mmc_regulator_get_supply(mmc);
- if (ret)
- return ret;
+ if (!mmc->supply.vqmmc) {
+ ret = mmc_regulator_get_supply(mmc);
+ if (ret)
+ return ret;
+ enable_vqmmc = true;
+ }
DBG("Version: 0x%08x | Present: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_VERSION),
@@ -3767,9 +4170,6 @@
mmc_hostname(mmc), host->version);
}
- if (host->quirks & SDHCI_QUIRK_BROKEN_CQE)
- mmc->caps2 &= ~MMC_CAP2_CQE;
-
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
else if (!(host->caps & SDHCI_CAN_DO_SDMA))
@@ -3796,6 +4196,21 @@
if (sdhci_can_64bit_dma(host))
host->flags |= SDHCI_USE_64_BIT_DMA;
+ if (host->use_external_dma) {
+ ret = sdhci_external_dma_init(host);
+ if (ret == -EPROBE_DEFER)
+ goto unreg;
+ /*
+ * Fall back to use the DMA/PIO integrated in standard SDHCI
+ * instead of external DMA devices.
+ */
+ else if (ret)
+ sdhci_switch_external_dma(host, false);
+ /* Disable internal DMA sources */
+ else
+ host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
+ }
+
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->set_dma_mask)
ret = host->ops->set_dma_mask(host);
@@ -3822,15 +4237,13 @@
dma_addr_t dma;
void *buf;
- if (host->flags & SDHCI_USE_64_BIT_DMA) {
- host->adma_table_sz = host->adma_table_cnt *
- SDHCI_ADMA2_64_DESC_SZ(host);
- host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host);
- } else {
- host->adma_table_sz = host->adma_table_cnt *
- SDHCI_ADMA2_32_DESC_SZ;
- host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
- }
+ if (!(host->flags & SDHCI_USE_64_BIT_DMA))
+ host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ;
+ else if (!host->alloc_desc_sz)
+ host->alloc_desc_sz = SDHCI_ADMA2_64_DESC_SZ(host);
+
+ host->desc_sz = host->alloc_desc_sz;
+ host->adma_table_sz = host->adma_table_cnt * host->desc_sz;
host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN;
/*
@@ -3871,11 +4284,9 @@
}
if (host->version >= SDHCI_SPEC_300)
- host->max_clk = (host->caps & SDHCI_CLOCK_V3_BASE_MASK)
- >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk = FIELD_GET(SDHCI_CLOCK_V3_BASE_MASK, host->caps);
else
- host->max_clk = (host->caps & SDHCI_CLOCK_BASE_MASK)
- >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk = FIELD_GET(SDHCI_CLOCK_BASE_MASK, host->caps);
host->max_clk *= 1000000;
if (host->max_clk == 0 || host->quirks &
@@ -3893,8 +4304,7 @@
* In case of Host Controller v3.00, find out whether clock
* multiplier is supported.
*/
- host->clk_mul = (host->caps1 & SDHCI_CLOCK_MUL_MASK) >>
- SDHCI_CLOCK_MUL_SHIFT;
+ host->clk_mul = FIELD_GET(SDHCI_CLOCK_MUL_MASK, host->caps1);
/*
* In case the value in Clock Multiplier is 0, then programmable
@@ -3927,8 +4337,7 @@
mmc->f_max = max_clk;
if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >>
- SDHCI_TIMEOUT_CLK_SHIFT;
+ host->timeout_clk = FIELD_GET(SDHCI_TIMEOUT_CLK_MASK, host->caps);
if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
@@ -3958,7 +4367,7 @@
!host->ops->get_max_timeout_count)
mmc->max_busy_timeout = 0;
- mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
+ mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_CMD23;
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
@@ -4000,7 +4409,10 @@
mmc->caps |= MMC_CAP_NEEDS_POLL;
if (!IS_ERR(mmc->supply.vqmmc)) {
- ret = regulator_enable(mmc->supply.vqmmc);
+ if (enable_vqmmc) {
+ ret = regulator_enable(mmc->supply.vqmmc);
+ host->sdhci_core_to_disable_vqmmc = !ret;
+ }
/* If vqmmc provides no 1.8V signalling, then there's no UHS */
if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
@@ -4019,6 +4431,7 @@
mmc_hostname(mmc), ret);
mmc->supply.vqmmc = ERR_PTR(-EINVAL);
}
+
}
if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V) {
@@ -4080,8 +4493,8 @@
mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
/* Initial value for re-tuning timer count */
- host->tuning_count = (host->caps1 & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
- SDHCI_RETUNING_TIMER_COUNT_SHIFT;
+ host->tuning_count = FIELD_GET(SDHCI_RETUNING_TIMER_COUNT_MASK,
+ host->caps1);
/*
* In case Re-tuning Timer is not disabled, the actual value of
@@ -4091,8 +4504,7 @@
host->tuning_count = 1 << (host->tuning_count - 1);
/* Re-tuning mode supported by the Host Controller */
- host->tuning_mode = (host->caps1 & SDHCI_RETUNING_MODE_MASK) >>
- SDHCI_RETUNING_MODE_SHIFT;
+ host->tuning_mode = FIELD_GET(SDHCI_RETUNING_MODE_MASK, host->caps1);
ocr_avail = 0;
@@ -4114,35 +4526,32 @@
curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
max_current_caps =
- (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
- (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
- (curr << SDHCI_MAX_CURRENT_180_SHIFT);
+ FIELD_PREP(SDHCI_MAX_CURRENT_330_MASK, curr) |
+ FIELD_PREP(SDHCI_MAX_CURRENT_300_MASK, curr) |
+ FIELD_PREP(SDHCI_MAX_CURRENT_180_MASK, curr);
}
}
if (host->caps & SDHCI_CAN_VDD_330) {
ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->max_current_330 = ((max_current_caps &
- SDHCI_MAX_CURRENT_330_MASK) >>
- SDHCI_MAX_CURRENT_330_SHIFT) *
- SDHCI_MAX_CURRENT_MULTIPLIER;
+ mmc->max_current_330 = FIELD_GET(SDHCI_MAX_CURRENT_330_MASK,
+ max_current_caps) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
}
if (host->caps & SDHCI_CAN_VDD_300) {
ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
- mmc->max_current_300 = ((max_current_caps &
- SDHCI_MAX_CURRENT_300_MASK) >>
- SDHCI_MAX_CURRENT_300_SHIFT) *
- SDHCI_MAX_CURRENT_MULTIPLIER;
+ mmc->max_current_300 = FIELD_GET(SDHCI_MAX_CURRENT_300_MASK,
+ max_current_caps) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
}
if (host->caps & SDHCI_CAN_VDD_180) {
ocr_avail |= MMC_VDD_165_195;
- mmc->max_current_180 = ((max_current_caps &
- SDHCI_MAX_CURRENT_180_MASK) >>
- SDHCI_MAX_CURRENT_180_SHIFT) *
- SDHCI_MAX_CURRENT_MULTIPLIER;
+ mmc->max_current_180 = FIELD_GET(SDHCI_MAX_CURRENT_180_MASK,
+ max_current_caps) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
}
/* If OCR set by host, use it instead. */
@@ -4215,10 +4624,12 @@
* be larger than 64 KiB though.
*/
if (host->flags & SDHCI_USE_ADMA) {
- if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
+ if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC) {
+ host->max_adma = 65532; /* 32-bit alignment */
mmc->max_seg_size = 65535;
- else
+ } else {
mmc->max_seg_size = 65536;
+ }
} else {
mmc->max_seg_size = mmc->max_req_size;
}
@@ -4253,7 +4664,7 @@
return 0;
unreg:
- if (!IS_ERR(mmc->supply.vqmmc))
+ if (host->sdhci_core_to_disable_vqmmc)
regulator_disable(mmc->supply.vqmmc);
undma:
if (host->align_buffer)
@@ -4271,13 +4682,17 @@
{
struct mmc_host *mmc = host->mmc;
- if (!IS_ERR(mmc->supply.vqmmc))
+ if (host->sdhci_core_to_disable_vqmmc)
regulator_disable(mmc->supply.vqmmc);
if (host->align_buffer)
dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
host->adma_table_sz, host->align_buffer,
host->align_addr);
+
+ if (host->use_external_dma)
+ sdhci_external_dma_release(host);
+
host->adma_table = NULL;
host->align_buffer = NULL;
}
@@ -4289,6 +4704,12 @@
struct mmc_host *mmc = host->mmc;
int ret;
+ if ((mmc->caps2 & MMC_CAP2_CQE) &&
+ (host->quirks & SDHCI_QUIRK_BROKEN_CQE)) {
+ mmc->caps2 &= ~MMC_CAP2_CQE;
+ mmc->cqe_ops = NULL;
+ }
+
host->complete_wq = alloc_workqueue("sdhci", flags, 0);
if (!host->complete_wq)
return -ENOMEM;
@@ -4323,6 +4744,7 @@
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
+ host->use_external_dma ? "External DMA" :
(host->flags & SDHCI_USE_ADMA) ?
(host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
@@ -4403,7 +4825,7 @@
destroy_workqueue(host->complete_wq);
- if (!IS_ERR(mmc->supply.vqmmc))
+ if (host->sdhci_core_to_disable_vqmmc)
regulator_disable(mmc->supply.vqmmc);
if (host->align_buffer)
@@ -4411,6 +4833,9 @@
host->adma_table_sz, host->align_buffer,
host->align_addr);
+ if (host->use_external_dma)
+ sdhci_external_dma_release(host);
+
host->adma_table = NULL;
host->align_buffer = NULL;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 96a0a8f..8b1650f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -9,6 +9,7 @@
#ifndef __SDHCI_HW_H
#define __SDHCI_HW_H
+#include <linux/bits.h>
#include <linux/scatterlist.h>
#include <linux/compiler.h>
#include <linux/types.h>
@@ -199,12 +200,10 @@
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
-#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
-#define SDHCI_TIMEOUT_CLK_SHIFT 0
+#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0)
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
-#define SDHCI_CLOCK_BASE_MASK 0x00003F00
-#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
-#define SDHCI_CLOCK_BASE_SHIFT 8
+#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8)
+#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8)
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
#define SDHCI_CAN_DO_8BIT 0x00040000
@@ -219,32 +218,25 @@
#define SDHCI_CAN_64BIT_V4 0x08000000
#define SDHCI_CAN_64BIT 0x10000000
+#define SDHCI_CAPABILITIES_1 0x44
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
#define SDHCI_DRIVER_TYPE_A 0x00000010
#define SDHCI_DRIVER_TYPE_C 0x00000020
#define SDHCI_DRIVER_TYPE_D 0x00000040
-#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00
-#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8
+#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8)
#define SDHCI_USE_SDR50_TUNING 0x00002000
-#define SDHCI_RETUNING_MODE_MASK 0x0000C000
-#define SDHCI_RETUNING_MODE_SHIFT 14
-#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
-#define SDHCI_CLOCK_MUL_SHIFT 16
+#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14)
+#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16)
#define SDHCI_CAN_DO_ADMA3 0x08000000
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
-#define SDHCI_CAPABILITIES_1 0x44
-
#define SDHCI_MAX_CURRENT 0x48
-#define SDHCI_MAX_CURRENT_LIMIT 0xFF
-#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
-#define SDHCI_MAX_CURRENT_330_SHIFT 0
-#define SDHCI_MAX_CURRENT_300_MASK 0x00FF00
-#define SDHCI_MAX_CURRENT_300_SHIFT 8
-#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
-#define SDHCI_MAX_CURRENT_180_SHIFT 16
+#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0)
+#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0)
+#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8)
+#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16)
#define SDHCI_MAX_CURRENT_MULTIPLIER 4
/* 4C-4F reserved for more max current */
@@ -268,12 +260,9 @@
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
-#define SDHCI_PRESET_DRV_MASK 0xC000
-#define SDHCI_PRESET_DRV_SHIFT 14
-#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
-#define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10
-#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
-#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
+#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14)
+#define SDHCI_PRESET_CLKGEN_SEL BIT(10)
+#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0)
#define SDHCI_SLOT_INT_STATUS 0xFC
@@ -349,7 +338,8 @@
/*
* Maximum segments assuming a 512KiB maximum requisition size and a minimum
- * 4KiB page size.
+ * 4KiB page size. Note this also allows enough for multiple descriptors in
+ * case of PAGE_SIZE >= 64KiB.
*/
#define SDHCI_MAX_SEGS 128
@@ -488,6 +478,7 @@
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
+ phys_addr_t mapbase; /* physical address base */
char *bounce_buffer; /* For packing SDMA reads/writes */
dma_addr_t bounce_addr;
unsigned int bounce_buffer_size;
@@ -536,10 +527,13 @@
bool pending_reset; /* Cmd/data reset is pending */
bool irq_wake_enabled; /* IRQ wakeup is enabled */
bool v4_mode; /* Host Version 4 Enable */
+ bool use_external_dma; /* Host selects to use external DMA */
+ bool always_defer_done; /* Always defer to complete requests */
struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
struct mmc_command *cmd; /* Current command */
struct mmc_command *data_cmd; /* Current data command */
+ struct mmc_command *deferred_cmd; /* Deferred command */
struct mmc_data *data; /* Current data request */
unsigned int data_early:1; /* Data finished before cmd */
@@ -547,6 +541,7 @@
unsigned int blocks; /* remaining PIO blocks */
int sg_count; /* Mapped sg entries */
+ int max_adma; /* Max. length in ADMA descriptor */
void *adma_table; /* ADMA descriptor table */
void *align_buffer; /* Bounce buffer */
@@ -557,7 +552,8 @@
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
- unsigned int desc_sz; /* ADMA descriptor size */
+ unsigned int desc_sz; /* ADMA current descriptor size */
+ unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */
struct workqueue_struct *complete_wq; /* Request completion wq */
struct work_struct complete_work; /* Request completion work */
@@ -565,10 +561,16 @@
struct timer_list timer; /* Timer for timeouts */
struct timer_list data_timer; /* Timer for data timeouts */
+#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
+ struct dma_chan *rx_chan;
+ struct dma_chan *tx_chan;
+#endif
+
u32 caps; /* CAPABILITY_0 */
u32 caps1; /* CAPABILITY_1 */
bool read_caps; /* Capability flags have been read */
+ bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */
unsigned int ocr_avail_sdio; /* OCR bit masks */
unsigned int ocr_avail_sd;
unsigned int ocr_avail_mmc;
@@ -606,7 +608,7 @@
u64 data_timeout;
- unsigned long private[0] ____cacheline_aligned;
+ unsigned long private[] ____cacheline_aligned;
};
struct sdhci_ops {
@@ -647,6 +649,12 @@
void (*voltage_switch)(struct sdhci_host *host);
void (*adma_write_desc)(struct sdhci_host *host, void **desc,
dma_addr_t addr, int len, unsigned int cmd);
+ void (*copy_to_bounce_buffer)(struct sdhci_host *host,
+ struct mmc_data *data,
+ unsigned int length);
+ void (*request_done)(struct sdhci_host *host,
+ struct mmc_request *mrq);
+ void (*dump_vendor_regs)(struct sdhci_host *host);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
@@ -749,7 +757,6 @@
int __sdhci_add_host(struct sdhci_host *host);
int sdhci_add_host(struct sdhci_host *host);
void sdhci_remove_host(struct sdhci_host *host, int dead);
-void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
static inline void sdhci_read_caps(struct sdhci_host *host)
{
@@ -762,9 +769,13 @@
void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
+void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
+ unsigned char mode,
+ unsigned short vdd);
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
unsigned short vdd);
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
+int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
void sdhci_reset(struct sdhci_host *host, u8 mask);
void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
@@ -796,6 +807,7 @@
void sdhci_reset_tuning(struct sdhci_host *host);
void sdhci_send_tuning(struct sdhci_host *host, u32 opcode);
void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode);
+void sdhci_switch_external_dma(struct sdhci_host *host, bool en);
void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable);
void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index 4cbb764..a64ea14 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -2,23 +2,28 @@
/*
* sdhci_am654.c - SDHCI driver for TI's AM654 SOCs
*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com
*
*/
#include <linux/clk.h>
+#include <linux/iopoll.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/regmap.h>
+#include <linux/sys_soc.h>
+#include "cqhci.h"
#include "sdhci-pltfm.h"
/* CTL_CFG Registers */
#define CTL_CFG_2 0x14
+#define CTL_CFG_3 0x18
#define SLOTTYPE_MASK GENMASK(31, 30)
#define SLOTTYPE_EMBEDDED BIT(30)
+#define TUNINGFORSDR50_MASK BIT(13)
/* PHY Registers */
#define PHY_CTRL1 0x100
@@ -45,6 +50,8 @@
#define SEL100_MASK BIT(SEL100_SHIFT)
#define FREQSEL_SHIFT 8
#define FREQSEL_MASK GENMASK(10, 8)
+#define CLKBUFSEL_SHIFT 0
+#define CLKBUFSEL_MASK GENMASK(2, 0)
#define DLL_TRIM_ICP_SHIFT 4
#define DLL_TRIM_ICP_MASK GENMASK(7, 4)
#define DR_TY_SHIFT 20
@@ -59,6 +66,16 @@
#define CALDONE_MASK BIT(CALDONE_SHIFT)
#define RETRIM_SHIFT 17
#define RETRIM_MASK BIT(RETRIM_SHIFT)
+#define SELDLYTXCLK_SHIFT 17
+#define SELDLYTXCLK_MASK BIT(SELDLYTXCLK_SHIFT)
+#define SELDLYRXCLK_SHIFT 16
+#define SELDLYRXCLK_MASK BIT(SELDLYRXCLK_SHIFT)
+#define ITAPDLYSEL_SHIFT 0
+#define ITAPDLYSEL_MASK GENMASK(4, 0)
+#define ITAPDLYENA_SHIFT 8
+#define ITAPDLYENA_MASK BIT(ITAPDLYENA_SHIFT)
+#define ITAPCHGWIN_SHIFT 9
+#define ITAPCHGWIN_MASK BIT(ITAPCHGWIN_SHIFT)
#define DRIVER_STRENGTH_50_OHM 0x0
#define DRIVER_STRENGTH_33_OHM 0x1
@@ -66,7 +83,10 @@
#define DRIVER_STRENGTH_100_OHM 0x3
#define DRIVER_STRENGTH_40_OHM 0x4
-#define CLOCK_TOO_SLOW_HZ 400000
+#define CLOCK_TOO_SLOW_HZ 50000000
+
+/* Command Queue Host Controller Interface Base address */
+#define SDHCI_AM654_CQE_BASE_ADDR 0x200
static struct regmap_config sdhci_am654_regmap_config = {
.reg_bits = 32,
@@ -75,12 +95,56 @@
.fast_io = true,
};
+struct timing_data {
+ const char *otap_binding;
+ const char *itap_binding;
+ u32 capability;
+};
+
+static const struct timing_data td[] = {
+ [MMC_TIMING_LEGACY] = {"ti,otap-del-sel-legacy",
+ "ti,itap-del-sel-legacy",
+ 0},
+ [MMC_TIMING_MMC_HS] = {"ti,otap-del-sel-mmc-hs",
+ "ti,itap-del-sel-mmc-hs",
+ MMC_CAP_MMC_HIGHSPEED},
+ [MMC_TIMING_SD_HS] = {"ti,otap-del-sel-sd-hs",
+ "ti,itap-del-sel-sd-hs",
+ MMC_CAP_SD_HIGHSPEED},
+ [MMC_TIMING_UHS_SDR12] = {"ti,otap-del-sel-sdr12",
+ "ti,itap-del-sel-sdr12",
+ MMC_CAP_UHS_SDR12},
+ [MMC_TIMING_UHS_SDR25] = {"ti,otap-del-sel-sdr25",
+ "ti,itap-del-sel-sdr25",
+ MMC_CAP_UHS_SDR25},
+ [MMC_TIMING_UHS_SDR50] = {"ti,otap-del-sel-sdr50",
+ NULL,
+ MMC_CAP_UHS_SDR50},
+ [MMC_TIMING_UHS_SDR104] = {"ti,otap-del-sel-sdr104",
+ NULL,
+ MMC_CAP_UHS_SDR104},
+ [MMC_TIMING_UHS_DDR50] = {"ti,otap-del-sel-ddr50",
+ NULL,
+ MMC_CAP_UHS_DDR50},
+ [MMC_TIMING_MMC_DDR52] = {"ti,otap-del-sel-ddr52",
+ "ti,itap-del-sel-ddr52",
+ MMC_CAP_DDR},
+ [MMC_TIMING_MMC_HS200] = {"ti,otap-del-sel-hs200",
+ NULL,
+ MMC_CAP2_HS200},
+ [MMC_TIMING_MMC_HS400] = {"ti,otap-del-sel-hs400",
+ NULL,
+ MMC_CAP2_HS400},
+};
+
struct sdhci_am654_data {
struct regmap *base;
- int otap_del_sel;
+ bool legacy_otapdly;
+ int otap_del_sel[ARRAY_SIZE(td)];
+ int itap_del_sel[ARRAY_SIZE(td)];
+ int clkbuf_sel;
int trm_icp;
int drv_strength;
- bool dll_on;
int strb_sel;
u32 flags;
};
@@ -92,9 +156,10 @@
#define FREQSEL_2_BIT (1 << 1)
#define STRBSEL_4_BIT (1 << 2)
#define DLL_PRESENT (1 << 3)
+#define DLL_CALIB (1 << 4)
};
-static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
+static void sdhci_am654_setup_dll(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
@@ -102,91 +167,136 @@
u32 mask, val;
int ret;
- if (sdhci_am654->dll_on) {
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);
+ /* Disable delay chain mode */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5,
+ SELDLYTXCLK_MASK | SELDLYRXCLK_MASK, 0);
- sdhci_am654->dll_on = false;
+ if (sdhci_am654->flags & FREQSEL_2_BIT) {
+ switch (clock) {
+ case 200000000:
+ sel50 = 0;
+ sel100 = 0;
+ break;
+ case 100000000:
+ sel50 = 0;
+ sel100 = 1;
+ break;
+ default:
+ sel50 = 1;
+ sel100 = 0;
+ }
+
+ /* Configure PHY DLL frequency */
+ mask = SEL50_MASK | SEL100_MASK;
+ val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, val);
+
+ } else {
+ switch (clock) {
+ case 200000000:
+ freqsel = 0x0;
+ break;
+ default:
+ freqsel = 0x4;
+ }
+
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, FREQSEL_MASK,
+ freqsel << FREQSEL_SHIFT);
}
+ /* Configure DLL TRIM */
+ mask = DLL_TRIM_ICP_MASK;
+ val = sdhci_am654->trm_icp << DLL_TRIM_ICP_SHIFT;
+
+ /* Configure DLL driver strength */
+ mask |= DR_TY_MASK;
+ val |= sdhci_am654->drv_strength << DR_TY_SHIFT;
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, mask, val);
+
+ /* Enable DLL */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK,
+ 0x1 << ENDLL_SHIFT);
+ /*
+ * Poll for DLL ready. Use a one second timeout.
+ * Works in all experiments done so far
+ */
+ ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1, val,
+ val & DLLRDY_MASK, 1000, 1000000);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc), "DLL failed to relock\n");
+ return;
+ }
+}
+
+static void sdhci_am654_write_itapdly(struct sdhci_am654_data *sdhci_am654,
+ u32 itapdly)
+{
+ /* Set ITAPCHGWIN before writing to ITAPDLY */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK,
+ 1 << ITAPCHGWIN_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYSEL_MASK,
+ itapdly << ITAPDLYSEL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
+}
+
+static void sdhci_am654_setup_delay_chain(struct sdhci_am654_data *sdhci_am654,
+ unsigned char timing)
+{
+ u32 mask, val;
+
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);
+
+ val = 1 << SELDLYTXCLK_SHIFT | 1 << SELDLYRXCLK_SHIFT;
+ mask = SELDLYTXCLK_MASK | SELDLYRXCLK_MASK;
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, val);
+
+ sdhci_am654_write_itapdly(sdhci_am654,
+ sdhci_am654->itap_del_sel[timing]);
+}
+
+static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+ unsigned char timing = host->mmc->ios.timing;
+ u32 otap_del_sel;
+ u32 otap_del_ena;
+ u32 mask, val;
+
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);
sdhci_set_clock(host, clock);
- if (clock > CLOCK_TOO_SLOW_HZ) {
- /* Setup DLL Output TAP delay */
- mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
- val = (1 << OTAPDLYENA_SHIFT) |
- (sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
- /* Write to STRBSEL for HS400 speed mode */
- if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400) {
- if (sdhci_am654->flags & STRBSEL_4_BIT)
- mask = STRBSEL_4BIT_MASK;
- else
- mask = STRBSEL_8BIT_MASK;
+ /* Setup DLL Output TAP delay */
+ if (sdhci_am654->legacy_otapdly)
+ otap_del_sel = sdhci_am654->otap_del_sel[0];
+ else
+ otap_del_sel = sdhci_am654->otap_del_sel[timing];
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask,
- sdhci_am654->strb_sel <<
- STRBSEL_SHIFT);
- }
+ otap_del_ena = (timing > MMC_TIMING_UHS_SDR25) ? 1 : 0;
- if (sdhci_am654->flags & FREQSEL_2_BIT) {
- switch (clock) {
- case 200000000:
- sel50 = 0;
- sel100 = 0;
- break;
- case 100000000:
- sel50 = 0;
- sel100 = 1;
- break;
- default:
- sel50 = 1;
- sel100 = 0;
- }
+ mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
+ val = (otap_del_ena << OTAPDLYENA_SHIFT) |
+ (otap_del_sel << OTAPDLYSEL_SHIFT);
- /* Configure PHY DLL frequency */
- mask = SEL50_MASK | SEL100_MASK;
- val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask,
- val);
- } else {
- switch (clock) {
- case 200000000:
- freqsel = 0x0;
- break;
- default:
- freqsel = 0x4;
- }
+ /* Write to STRBSEL for HS400 speed mode */
+ if (timing == MMC_TIMING_MMC_HS400) {
+ if (sdhci_am654->flags & STRBSEL_4_BIT)
+ mask |= STRBSEL_4BIT_MASK;
+ else
+ mask |= STRBSEL_8BIT_MASK;
- regmap_update_bits(sdhci_am654->base, PHY_CTRL5,
- FREQSEL_MASK,
- freqsel << FREQSEL_SHIFT);
- }
-
- /* Configure DLL TRIM */
- mask = DLL_TRIM_ICP_MASK;
- val = sdhci_am654->trm_icp << DLL_TRIM_ICP_SHIFT;
-
- /* Configure DLL driver strength */
- mask |= DR_TY_MASK;
- val |= sdhci_am654->drv_strength << DR_TY_SHIFT;
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1, mask, val);
- /* Enable DLL */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK,
- 0x1 << ENDLL_SHIFT);
- /*
- * Poll for DLL ready. Use a one second timeout.
- * Works in all experiments done so far
- */
- ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1,
- val, val & DLLRDY_MASK, 1000,
- 1000000);
- if (ret) {
- dev_err(mmc_dev(host->mmc), "DLL failed to relock\n");
- return;
- }
-
- sdhci_am654->dll_on = true;
+ val |= sdhci_am654->strb_sel << STRBSEL_SHIFT;
}
+
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
+
+ if (timing > MMC_TIMING_UHS_SDR25 && clock >= CLOCK_TOO_SLOW_HZ)
+ sdhci_am654_setup_dll(host, clock);
+ else
+ sdhci_am654_setup_delay_chain(sdhci_am654, timing);
+
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
+ sdhci_am654->clkbuf_sel);
}
static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
@@ -194,30 +304,40 @@
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
- int val, mask;
+ unsigned char timing = host->mmc->ios.timing;
+ u32 otap_del_sel;
+ u32 mask, val;
+
+ /* Setup DLL Output TAP delay */
+ if (sdhci_am654->legacy_otapdly)
+ otap_del_sel = sdhci_am654->otap_del_sel[0];
+ else
+ otap_del_sel = sdhci_am654->otap_del_sel[timing];
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
- val = (1 << OTAPDLYENA_SHIFT) |
- (sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT);
+ val = (0x1 << OTAPDLYENA_SHIFT) |
+ (otap_del_sel << OTAPDLYSEL_SHIFT);
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, CLKBUFSEL_MASK,
+ sdhci_am654->clkbuf_sel);
+
sdhci_set_clock(host, clock);
}
-static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+static u8 sdhci_am654_write_power_on(struct sdhci_host *host, u8 val, int reg)
{
- if (!IS_ERR(host->mmc->supply.vmmc)) {
- struct mmc_host *mmc = host->mmc;
-
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
- }
- sdhci_set_power_noreg(host, mode, vdd);
+ writeb(val, host->ioaddr + reg);
+ usleep_range(1000, 10000);
+ return readb(host->ioaddr + reg);
}
+#define MAX_POWER_ON_TIMEOUT 1500000 /* us */
static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
{
unsigned char timing = host->mmc->ios.timing;
+ u8 pwr;
+ int ret;
if (reg == SDHCI_HOST_CONTROL) {
switch (timing) {
@@ -234,6 +354,19 @@
}
writeb(val, host->ioaddr + reg);
+ if (reg == SDHCI_POWER_CONTROL && (val & SDHCI_POWER_ON)) {
+ /*
+ * Power on will not happen until the card detect debounce
+ * timer expires. Wait at least 1.5 seconds for the power on
+ * bit to be set
+ */
+ ret = read_poll_timeout(sdhci_am654_write_power_on, pwr,
+ pwr & SDHCI_POWER_ON, 0,
+ MAX_POWER_ON_TIMEOUT, false, host, val,
+ reg);
+ if (ret)
+ dev_warn(mmc_dev(host->mmc), "Power on failed\n");
+ }
}
static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
@@ -252,14 +385,67 @@
return 0;
}
+static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask)
+{
+ int cmd_error = 0;
+ int data_error = 0;
+
+ if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+ return intmask;
+
+ cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+ return 0;
+}
+
+#define ITAP_MAX 32
+static int sdhci_am654_platform_execute_tuning(struct sdhci_host *host,
+ u32 opcode)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host);
+ int cur_val, prev_val = 1, fail_len = 0, pass_window = 0, pass_len;
+ u32 itap;
+
+ /* Enable ITAPDLY */
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, ITAPDLYENA_MASK,
+ 1 << ITAPDLYENA_SHIFT);
+
+ for (itap = 0; itap < ITAP_MAX; itap++) {
+ sdhci_am654_write_itapdly(sdhci_am654, itap);
+
+ cur_val = !mmc_send_tuning(host->mmc, opcode, NULL);
+ if (cur_val && !prev_val)
+ pass_window = itap;
+
+ if (!cur_val)
+ fail_len++;
+
+ prev_val = cur_val;
+ }
+ /*
+ * Having determined the length of the failing window and start of
+ * the passing window calculate the length of the passing window and
+ * set the final value halfway through it considering the range as a
+ * circular buffer
+ */
+ pass_len = ITAP_MAX - fail_len;
+ itap = (pass_window + (pass_len >> 1)) % ITAP_MAX;
+ sdhci_am654_write_itapdly(sdhci_am654, itap);
+
+ return 0;
+}
+
static struct sdhci_ops sdhci_am654_ops = {
+ .platform_execute_tuning = sdhci_am654_platform_execute_tuning,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.set_bus_width = sdhci_set_bus_width,
- .set_power = sdhci_am654_set_power,
+ .set_power = sdhci_set_power_and_bus_voltage,
.set_clock = sdhci_am654_set_clock,
.write_b = sdhci_am654_write_b,
+ .irq = sdhci_am654_cqhci_irq,
.reset = sdhci_reset,
};
@@ -269,19 +455,27 @@
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
};
+static const struct sdhci_am654_driver_data sdhci_am654_sr1_drvdata = {
+ .pdata = &sdhci_am654_pdata,
+ .flags = IOMUX_PRESENT | FREQSEL_2_BIT | STRBSEL_4_BIT | DLL_PRESENT |
+ DLL_CALIB,
+};
+
static const struct sdhci_am654_driver_data sdhci_am654_drvdata = {
.pdata = &sdhci_am654_pdata,
.flags = IOMUX_PRESENT | FREQSEL_2_BIT | STRBSEL_4_BIT | DLL_PRESENT,
};
static struct sdhci_ops sdhci_j721e_8bit_ops = {
+ .platform_execute_tuning = sdhci_am654_platform_execute_tuning,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.set_bus_width = sdhci_set_bus_width,
- .set_power = sdhci_am654_set_power,
+ .set_power = sdhci_set_power_and_bus_voltage,
.set_clock = sdhci_am654_set_clock,
.write_b = sdhci_am654_write_b,
+ .irq = sdhci_am654_cqhci_irq,
.reset = sdhci_reset,
};
@@ -293,17 +487,19 @@
static const struct sdhci_am654_driver_data sdhci_j721e_8bit_drvdata = {
.pdata = &sdhci_j721e_8bit_pdata,
- .flags = DLL_PRESENT,
+ .flags = DLL_PRESENT | DLL_CALIB,
};
static struct sdhci_ops sdhci_j721e_4bit_ops = {
+ .platform_execute_tuning = sdhci_am654_platform_execute_tuning,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.set_bus_width = sdhci_set_bus_width,
- .set_power = sdhci_am654_set_power,
+ .set_power = sdhci_set_power_and_bus_voltage,
.set_clock = sdhci_j721e_4bit_set_clock,
.write_b = sdhci_am654_write_b,
+ .irq = sdhci_am654_cqhci_irq,
.reset = sdhci_reset,
};
@@ -317,6 +513,101 @@
.pdata = &sdhci_j721e_4bit_pdata,
.flags = IOMUX_PRESENT,
};
+
+static const struct soc_device_attribute sdhci_am654_devices[] = {
+ { .family = "AM65X",
+ .revision = "SR1.0",
+ .data = &sdhci_am654_sr1_drvdata
+ },
+ {/* sentinel */}
+};
+
+static void sdhci_am654_dumpregs(struct mmc_host *mmc)
+{
+ sdhci_dumpregs(mmc_priv(mmc));
+}
+
+static const struct cqhci_host_ops sdhci_am654_cqhci_ops = {
+ .enable = sdhci_cqe_enable,
+ .disable = sdhci_cqe_disable,
+ .dumpregs = sdhci_am654_dumpregs,
+};
+
+static int sdhci_am654_cqe_add_host(struct sdhci_host *host)
+{
+ struct cqhci_host *cq_host;
+ int ret;
+
+ cq_host = devm_kzalloc(host->mmc->parent, sizeof(struct cqhci_host),
+ GFP_KERNEL);
+ if (!cq_host)
+ return -ENOMEM;
+
+ cq_host->mmio = host->ioaddr + SDHCI_AM654_CQE_BASE_ADDR;
+ cq_host->quirks |= CQHCI_QUIRK_SHORT_TXFR_DESC_SZ;
+ cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ cq_host->ops = &sdhci_am654_cqhci_ops;
+
+ host->mmc->caps2 |= MMC_CAP2_CQE;
+
+ ret = cqhci_init(cq_host, host->mmc, 1);
+
+ return ret;
+}
+
+static int sdhci_am654_get_otap_delay(struct sdhci_host *host,
+ struct sdhci_am654_data *sdhci_am654)
+{
+ struct device *dev = mmc_dev(host->mmc);
+ int i;
+ int ret;
+
+ ret = device_property_read_u32(dev, td[MMC_TIMING_LEGACY].otap_binding,
+ &sdhci_am654->otap_del_sel[MMC_TIMING_LEGACY]);
+ if (ret) {
+ /*
+ * ti,otap-del-sel-legacy is mandatory, look for old binding
+ * if not found.
+ */
+ ret = device_property_read_u32(dev, "ti,otap-del-sel",
+ &sdhci_am654->otap_del_sel[0]);
+ if (ret) {
+ dev_err(dev, "Couldn't find otap-del-sel\n");
+
+ return ret;
+ }
+
+ dev_info(dev, "Using legacy binding ti,otap-del-sel\n");
+ sdhci_am654->legacy_otapdly = true;
+
+ return 0;
+ }
+
+ for (i = MMC_TIMING_MMC_HS; i <= MMC_TIMING_MMC_HS400; i++) {
+
+ ret = device_property_read_u32(dev, td[i].otap_binding,
+ &sdhci_am654->otap_del_sel[i]);
+ if (ret) {
+ dev_dbg(dev, "Couldn't find %s\n",
+ td[i].otap_binding);
+ /*
+ * Remove the corresponding capability
+ * if an otap-del-sel value is not found
+ */
+ if (i <= MMC_TIMING_MMC_DDR52)
+ host->mmc->caps &= ~td[i].capability;
+ else
+ host->mmc->caps2 &= ~td[i].capability;
+ }
+
+ if (td[i].itap_binding)
+ device_property_read_u32(dev, td[i].itap_binding,
+ &sdhci_am654->itap_del_sel[i]);
+ }
+
+ return 0;
+}
+
static int sdhci_am654_init(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -330,7 +621,7 @@
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, 0x0);
- if (sdhci_am654->flags & DLL_PRESENT) {
+ if (sdhci_am654->flags & DLL_CALIB) {
regmap_read(sdhci_am654->base, PHY_STAT1, &val);
if (~val & CALDONE_MASK) {
/* Calibrate IO lines */
@@ -357,7 +648,31 @@
regmap_update_bits(sdhci_am654->base, CTL_CFG_2, SLOTTYPE_MASK,
ctl_cfg_2);
- return sdhci_add_host(host);
+ /* Enable tuning for SDR50 */
+ regmap_update_bits(sdhci_am654->base, CTL_CFG_3, TUNINGFORSDR50_MASK,
+ TUNINGFORSDR50_MASK);
+
+ ret = sdhci_setup_host(host);
+ if (ret)
+ return ret;
+
+ ret = sdhci_am654_cqe_add_host(host);
+ if (ret)
+ goto err_cleanup_host;
+
+ ret = sdhci_am654_get_otap_delay(host, sdhci_am654);
+ if (ret)
+ goto err_cleanup_host;
+
+ ret = __sdhci_add_host(host);
+ if (ret)
+ goto err_cleanup_host;
+
+ return 0;
+
+err_cleanup_host:
+ sdhci_cleanup_host(host);
+ return ret;
}
static int sdhci_am654_get_of_property(struct platform_device *pdev,
@@ -367,11 +682,6 @@
int drv_strength;
int ret;
- ret = device_property_read_u32(dev, "ti,otap-del-sel",
- &sdhci_am654->otap_del_sel);
- if (ret)
- return ret;
-
if (sdhci_am654->flags & DLL_PRESENT) {
ret = device_property_read_u32(dev, "ti,trm-icp",
&sdhci_am654->trm_icp);
@@ -406,6 +716,8 @@
}
device_property_read_u32(dev, "ti,strobe-sel", &sdhci_am654->strb_sel);
+ device_property_read_u32(dev, "ti,clkbuf-sel",
+ &sdhci_am654->clkbuf_sel);
sdhci_get_of_property(pdev);
@@ -427,15 +739,16 @@
},
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, sdhci_am654_of_match);
static int sdhci_am654_probe(struct platform_device *pdev)
{
const struct sdhci_am654_driver_data *drvdata;
+ const struct soc_device_attribute *soc;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_am654_data *sdhci_am654;
const struct of_device_id *match;
struct sdhci_host *host;
- struct resource *res;
struct clk *clk_xin;
struct device *dev = &pdev->dev;
void __iomem *base;
@@ -443,6 +756,12 @@
match = of_match_node(sdhci_am654_of_match, pdev->dev.of_node);
drvdata = match->data;
+
+ /* Update drvdata based on SoC revision */
+ soc = soc_device_match(sdhci_am654_devices);
+ if (soc && soc->data)
+ drvdata = soc->data;
+
host = sdhci_pltfm_init(pdev, drvdata->pdata, sizeof(*sdhci_am654));
if (IS_ERR(host))
return PTR_ERR(host);
@@ -468,8 +787,7 @@
goto pm_runtime_disable;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- base = devm_ioremap_resource(dev, res);
+ base = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(base)) {
ret = PTR_ERR(base);
goto pm_runtime_put;
@@ -529,6 +847,7 @@
static struct platform_driver sdhci_am654_driver = {
.driver = {
.name = "sdhci-am654",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = sdhci_am654_of_match,
},
.probe = sdhci_am654_probe,
diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
index f8b939e..3f59779 100644
--- a/drivers/mmc/host/sdhci_f_sdh30.c
+++ b/drivers/mmc/host/sdhci_f_sdh30.c
@@ -16,31 +16,7 @@
#include <linux/clk.h>
#include "sdhci-pltfm.h"
-
-/* F_SDH30 extended Controller registers */
-#define F_SDH30_AHB_CONFIG 0x100
-#define F_SDH30_AHB_BIGED 0x00000040
-#define F_SDH30_BUSLOCK_DMA 0x00000020
-#define F_SDH30_BUSLOCK_EN 0x00000010
-#define F_SDH30_SIN 0x00000008
-#define F_SDH30_AHB_INCR_16 0x00000004
-#define F_SDH30_AHB_INCR_8 0x00000002
-#define F_SDH30_AHB_INCR_4 0x00000001
-
-#define F_SDH30_TUNING_SETTING 0x108
-#define F_SDH30_CMD_CHK_DIS 0x00010000
-
-#define F_SDH30_IO_CONTROL2 0x114
-#define F_SDH30_CRES_O_DN 0x00080000
-#define F_SDH30_MSEL_O_1_8 0x00040000
-
-#define F_SDH30_ESD_CONTROL 0x124
-#define F_SDH30_EMMC_RST 0x00000002
-#define F_SDH30_EMMC_HS200 0x01000000
-
-#define F_SDH30_CMD_DAT_DELAY 0x200
-
-#define F_SDH30_MIN_CLOCK 400000
+#include "sdhci_f_sdh30.h"
struct f_sdhost_priv {
struct clk *clk_iface;
@@ -113,7 +89,6 @@
{
struct sdhci_host *host;
struct device *dev = &pdev->dev;
- struct resource *res;
int irq, ctrl = 0, ret = 0;
struct f_sdhost_priv *priv;
u32 reg = 0;
@@ -147,8 +122,7 @@
host->ops = &sdhci_f_sdh30_ops;
host->irq = irq;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->ioaddr)) {
ret = PTR_ERR(host->ioaddr);
goto err;
@@ -245,6 +219,7 @@
static struct platform_driver sdhci_f_sdh30_driver = {
.driver = {
.name = "f_sdh30",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(f_sdh30_dt_ids),
.acpi_match_table = ACPI_PTR(f_sdh30_acpi_ids),
.pm = &sdhci_pltfm_pmops,
diff --git a/drivers/mmc/host/sdhci_f_sdh30.h b/drivers/mmc/host/sdhci_f_sdh30.h
new file mode 100644
index 0000000..fc1ad28
--- /dev/null
+++ b/drivers/mmc/host/sdhci_f_sdh30.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
+ * Vincent Yang <vincent.yang@tw.fujitsu.com>
+ * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org>
+ * Copyright (C) 2019 Socionext Inc.
+ *
+ */
+
+/* F_SDH30 extended Controller registers */
+#define F_SDH30_AHB_CONFIG 0x100
+#define F_SDH30_AHB_BIGED BIT(6)
+#define F_SDH30_BUSLOCK_DMA BIT(5)
+#define F_SDH30_BUSLOCK_EN BIT(4)
+#define F_SDH30_SIN BIT(3)
+#define F_SDH30_AHB_INCR_16 BIT(2)
+#define F_SDH30_AHB_INCR_8 BIT(1)
+#define F_SDH30_AHB_INCR_4 BIT(0)
+
+#define F_SDH30_TUNING_SETTING 0x108
+#define F_SDH30_CMD_CHK_DIS BIT(16)
+
+#define F_SDH30_IO_CONTROL2 0x114
+#define F_SDH30_CRES_O_DN BIT(19)
+#define F_SDH30_MSEL_O_1_8 BIT(18)
+
+#define F_SDH30_ESD_CONTROL 0x124
+#define F_SDH30_EMMC_RST BIT(1)
+#define F_SDH30_CMD_DAT_DELAY BIT(9)
+#define F_SDH30_EMMC_HS200 BIT(24)
+
+#define F_SDH30_MIN_CLOCK 400000
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index a38b8b2..76a8cd3 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ioport.h>
+#include <linux/iopoll.h>
#include <linux/scatterlist.h>
#include <pcmcia/cistpl.h>
@@ -22,6 +23,7 @@
#include <linux/io.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
#define DRIVER_NAME "sdricoh_cs"
@@ -57,10 +59,8 @@
#define STATUS_BUSY 0x40000000
/* timeouts */
-#define INIT_TIMEOUT 100
-#define CMD_TIMEOUT 100000
-#define TRANSFER_TIMEOUT 100000
-#define BUSY_TIMEOUT 32767
+#define SDRICOH_CMD_TIMEOUT_US 1000000
+#define SDRICOH_DATA_TIMEOUT_US 1000000
/* list of supported pcmcia devices */
static const struct pcmcia_device_id pcmcia_ids[] = {
@@ -124,19 +124,24 @@
return value;
}
-static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted,
- unsigned int timeout){
- unsigned int loop;
+static bool sdricoh_status_ok(struct sdricoh_host *host, unsigned int status,
+ unsigned int wanted)
+{
+ sdricoh_writel(host, R2E4_STATUS_RESP, status);
+ return status & wanted;
+}
+
+static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted)
+{
+ int ret;
unsigned int status = 0;
struct device *dev = host->dev;
- for (loop = 0; loop < timeout; loop++) {
- status = sdricoh_readl(host, R21C_STATUS);
- sdricoh_writel(host, R2E4_STATUS_RESP, status);
- if (status & wanted)
- break;
- }
- if (loop == timeout) {
+ ret = read_poll_timeout(sdricoh_readl, status,
+ sdricoh_status_ok(host, status, wanted),
+ 32, SDRICOH_DATA_TIMEOUT_US, false,
+ host, R21C_STATUS);
+ if (ret) {
dev_err(dev, "query_status: timeout waiting for %x\n", wanted);
return -ETIMEDOUT;
}
@@ -150,35 +155,46 @@
}
-static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode,
- unsigned int arg)
+static int sdricoh_mmc_cmd(struct sdricoh_host *host, struct mmc_command *cmd)
{
- unsigned int status;
- int result = 0;
- unsigned int loop = 0;
+ unsigned int status, timeout_us;
+ int ret;
+ unsigned char opcode = cmd->opcode;
+
/* reset status reg? */
sdricoh_writel(host, R21C_STATUS, 0x18);
+
+ /* MMC_APP_CMDs need some special handling */
+ if (host->app_cmd) {
+ opcode |= 64;
+ host->app_cmd = 0;
+ } else if (opcode == MMC_APP_CMD)
+ host->app_cmd = 1;
+
/* fill parameters */
- sdricoh_writel(host, R204_CMD_ARG, arg);
+ sdricoh_writel(host, R204_CMD_ARG, cmd->arg);
sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode);
+
/* wait for command completion */
- if (opcode) {
- for (loop = 0; loop < CMD_TIMEOUT; loop++) {
- status = sdricoh_readl(host, R21C_STATUS);
- sdricoh_writel(host, R2E4_STATUS_RESP, status);
- if (status & STATUS_CMD_FINISHED)
- break;
- }
- /* don't check for timeout in the loop it is not always
- reset correctly
- */
- if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT)
- result = -ETIMEDOUT;
+ if (!opcode)
+ return 0;
- }
+ timeout_us = cmd->busy_timeout ? cmd->busy_timeout * 1000 :
+ SDRICOH_CMD_TIMEOUT_US;
- return result;
+ ret = read_poll_timeout(sdricoh_readl, status,
+ sdricoh_status_ok(host, status, STATUS_CMD_FINISHED),
+ 32, timeout_us, false,
+ host, R21C_STATUS);
+ /*
+ * Don't check for timeout status in the loop, as it's not always reset
+ * correctly.
+ */
+ if (ret || status & STATUS_CMD_TIMEOUT)
+ return -ETIMEDOUT;
+
+ return 0;
}
static int sdricoh_reset(struct sdricoh_host *host)
@@ -207,8 +223,7 @@
u32 data = 0;
/* wait until the data is available */
if (read) {
- if (sdricoh_query_status(host, STATUS_READY_TO_READ,
- TRANSFER_TIMEOUT))
+ if (sdricoh_query_status(host, STATUS_READY_TO_READ))
return -ETIMEDOUT;
sdricoh_writel(host, R21C_STATUS, 0x18);
/* read data */
@@ -224,8 +239,7 @@
}
}
} else {
- if (sdricoh_query_status(host, STATUS_READY_TO_WRITE,
- TRANSFER_TIMEOUT))
+ if (sdricoh_query_status(host, STATUS_READY_TO_WRITE))
return -ETIMEDOUT;
sdricoh_writel(host, R21C_STATUS, 0x18);
/* write data */
@@ -251,28 +265,20 @@
struct mmc_command *cmd = mrq->cmd;
struct mmc_data *data = cmd->data;
struct device *dev = host->dev;
- unsigned char opcode = cmd->opcode;
int i;
dev_dbg(dev, "=============================\n");
- dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode);
+ dev_dbg(dev, "sdricoh_request opcode=%i\n", cmd->opcode);
sdricoh_writel(host, R21C_STATUS, 0x18);
- /* MMC_APP_CMDs need some special handling */
- if (host->app_cmd) {
- opcode |= 64;
- host->app_cmd = 0;
- } else if (opcode == 55)
- host->app_cmd = 1;
-
/* read/write commands seem to require this */
if (data) {
sdricoh_writew(host, R226_BLOCKSIZE, data->blksz);
sdricoh_writel(host, R208_DATAIO, 0);
}
- cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg);
+ cmd->error = sdricoh_mmc_cmd(host, cmd);
/* read response buffer */
if (cmd->flags & MMC_RSP_PRESENT) {
@@ -323,8 +329,7 @@
sdricoh_writel(host, R208_DATAIO, 1);
- if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED,
- TRANSFER_TIMEOUT)) {
+ if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED)) {
dev_err(dev, "sdricoh_request: transfer end error\n");
cmd->error = -EINVAL;
}
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 98c575d..e5e4570 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -191,9 +191,9 @@
STS2_AC12BSYTO | STS2_RSPBSYTO | \
STS2_AC12RSPTO | STS2_RSPTO)
-#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
-#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
-#define CLKDEV_INIT 400000 /* 400 KHz */
+#define CLKDEV_EMMC_DATA 52000000 /* 52 MHz */
+#define CLKDEV_MMC_DATA 20000000 /* 20 MHz */
+#define CLKDEV_INIT 400000 /* 400 kHz */
enum sh_mmcif_state {
STATE_IDLE,
@@ -432,8 +432,12 @@
host->chan_rx = sh_mmcif_request_dma_pdata(host,
pdata->slave_id_rx);
} else {
- host->chan_tx = dma_request_slave_channel(dev, "tx");
- host->chan_rx = dma_request_slave_channel(dev, "rx");
+ host->chan_tx = dma_request_chan(dev, "tx");
+ if (IS_ERR(host->chan_tx))
+ host->chan_tx = NULL;
+ host->chan_rx = dma_request_chan(dev, "rx");
+ if (IS_ERR(host->chan_rx))
+ host->chan_rx = NULL;
}
dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx,
host->chan_rx);
@@ -1388,7 +1392,6 @@
struct sh_mmcif_host *host;
struct device *dev = &pdev->dev;
struct sh_mmcif_plat_data *pd = dev->platform_data;
- struct resource *res;
void __iomem *reg;
const char *name;
@@ -1397,8 +1400,7 @@
if (irq[0] < 0)
return -ENXIO;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- reg = devm_ioremap_resource(dev, res);
+ reg = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(reg))
return PTR_ERR(reg);
@@ -1560,6 +1562,7 @@
.remove = sh_mmcif_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &sh_mmcif_dev_pm_ops,
.of_match_table = sh_mmcif_of_match,
},
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d577a6b..fc62773 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -951,9 +951,13 @@
static int sunxi_mmc_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
{
+ int ret;
+
/* vqmmc regulator is available */
- if (!IS_ERR(mmc->supply.vqmmc))
- return mmc_regulator_set_vqmmc(mmc, ios);
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ ret = mmc_regulator_set_vqmmc(mmc, ios);
+ return ret < 0 ? ret : 0;
+ }
/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
if (mmc->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330)
@@ -1273,8 +1277,7 @@
if (ret)
return ret;
- host->reg_base = devm_ioremap_resource(&pdev->dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
+ host->reg_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(host->reg_base))
return PTR_ERR(host->reg_base);
@@ -1391,7 +1394,7 @@
mmc->f_min = 400000;
mmc->f_max = 52000000;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
+ MMC_CAP_SDIO_IRQ;
/*
* Some H5 devices do not have signal traces precise enough to
@@ -1511,6 +1514,7 @@
static struct platform_driver sunxi_mmc_driver = {
.driver = {
.name = "sunxi-mmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(sunxi_mmc_of_match),
.pm = &sunxi_mmc_pm_ops,
},
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 54271b9..fd8b72d 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -73,6 +73,8 @@
#define TIFM_MMCSD_MAX_BLOCK_SIZE 0x0800UL
+#define TIFM_MMCSD_REQ_TIMEOUT_MS 1000
+
enum {
CMD_READY = 0x0001,
FIFO_READY = 0x0002,
@@ -333,7 +335,7 @@
break;
case MMC_RSP_R1B:
rc |= TIFM_MMCSD_RSP_BUSY;
- /* fall-through */
+ fallthrough;
case MMC_RSP_R1:
rc |= TIFM_MMCSD_RSP_R1;
break;
@@ -959,7 +961,12 @@
host = mmc_priv(mmc);
tifm_set_drvdata(sock, mmc);
host->dev = sock;
- host->timeout_jiffies = msecs_to_jiffies(1000);
+ host->timeout_jiffies = msecs_to_jiffies(TIFM_MMCSD_REQ_TIMEOUT_MS);
+ /*
+ * We use a fixed request timeout of 1s, hence inform the core about it.
+ * A future improvement should instead respect the cmd->busy_timeout.
+ */
+ mmc->max_busy_timeout = TIFM_MMCSD_REQ_TIMEOUT_MS;
tasklet_init(&host->finish_tasklet, tifm_sd_end_cmd,
(unsigned long)host);
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 93e83ad..d2d3b8d 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -77,18 +77,10 @@
static void tmio_mmc_reset(struct tmio_mmc_host *host)
{
- /* FIXME - should we set stop clock reg here */
- sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
usleep_range(10000, 11000);
- sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
usleep_range(10000, 11000);
-
- if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
- sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
- sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
- }
}
#ifdef CONFIG_PM_SLEEP
@@ -221,6 +213,7 @@
static struct platform_driver tmio_mmc_driver = {
.driver = {
.name = "tmio-mmc",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = &tmio_mmc_dev_pm_ops,
},
.probe = tmio_mmc_probe,
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 2f0b092..9546e54 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -118,6 +118,9 @@
void (*release)(struct tmio_mmc_host *host);
void (*abort)(struct tmio_mmc_host *host);
void (*dataend)(struct tmio_mmc_host *host);
+
+ /* optional */
+ void (*end)(struct tmio_mmc_host *host); /* held host->lock */
};
struct tmio_mmc_host {
@@ -163,7 +166,6 @@
unsigned long last_req_ts;
struct mutex ios_lock; /* protect set_ios() context */
bool native_hotplug;
- bool runtime_synced;
bool sdio_irq_enabled;
/* Mandatory callback */
@@ -176,21 +178,8 @@
unsigned int direction, int blk_size);
int (*write16_hook)(struct tmio_mmc_host *host, int addr);
void (*reset)(struct tmio_mmc_host *host);
- void (*hw_reset)(struct tmio_mmc_host *host);
- void (*prepare_tuning)(struct tmio_mmc_host *host, unsigned long tap);
- bool (*check_scc_error)(struct tmio_mmc_host *host);
-
- /*
- * Mandatory callback for tuning to occur which is optional for SDR50
- * and mandatory for SDR104.
- */
- unsigned int (*init_tuning)(struct tmio_mmc_host *host);
- int (*select_tuning)(struct tmio_mmc_host *host);
-
- /* Tuning values: 1 for success, 0 for failure */
- DECLARE_BITMAP(taps, BITS_PER_BYTE * sizeof(long));
- unsigned int tap_num;
- unsigned long tap_set;
+ bool (*check_retune)(struct tmio_mmc_host *host);
+ void (*fixup_request)(struct tmio_mmc_host *host, struct mmc_request *mrq);
void (*prepare_hs400_tuning)(struct tmio_mmc_host *host);
void (*hs400_downgrade)(struct tmio_mmc_host *host);
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 25083f0..ac4e787 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -57,6 +57,12 @@
host->dma_ops->start(host, data);
}
+static inline void tmio_mmc_end_dma(struct tmio_mmc_host *host)
+{
+ if (host->dma_ops && host->dma_ops->end)
+ host->dma_ops->end(host);
+}
+
static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
{
if (host->dma_ops)
@@ -166,24 +172,17 @@
sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
usleep_range(10000, 11000);
+ if (host->reset)
+ host->reset(host);
+
+ tmio_mmc_abort_dma(host);
+
if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
}
}
-static void tmio_mmc_hw_reset(struct mmc_host *mmc)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
-
- host->reset(host);
-
- tmio_mmc_abort_dma(host);
-
- if (host->hw_reset)
- host->hw_reset(host);
-}
-
static void tmio_mmc_reset_work(struct work_struct *work)
{
struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host,
@@ -222,11 +221,10 @@
spin_unlock_irqrestore(&host->lock, flags);
- tmio_mmc_hw_reset(host->mmc);
+ tmio_mmc_reset(host);
/* Ready for new calls */
host->mrq = NULL;
-
mmc_request_done(host->mmc, mrq);
}
@@ -714,49 +712,6 @@
return 0;
}
-static int tmio_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
- int i, ret = 0;
-
- if (!host->init_tuning || !host->select_tuning)
- /* Tuning is not supported */
- goto out;
-
- host->tap_num = host->init_tuning(host);
- if (!host->tap_num)
- /* Tuning is not supported */
- goto out;
-
- if (host->tap_num * 2 >= sizeof(host->taps) * BITS_PER_BYTE) {
- dev_warn_once(&host->pdev->dev,
- "Too many taps, skipping tuning. Please consider updating size of taps field of tmio_mmc_host\n");
- goto out;
- }
-
- bitmap_zero(host->taps, host->tap_num * 2);
-
- /* Issue CMD19 twice for each tap */
- for (i = 0; i < 2 * host->tap_num; i++) {
- if (host->prepare_tuning)
- host->prepare_tuning(host, i % host->tap_num);
-
- ret = mmc_send_tuning(mmc, opcode, NULL);
- if (ret == 0)
- set_bit(i, host->taps);
- }
-
- ret = host->select_tuning(host);
-
-out:
- if (ret < 0) {
- dev_warn(&host->pdev->dev, "Tuning procedure failed\n");
- tmio_mmc_hw_reset(mmc);
- }
-
- return ret;
-}
-
static void tmio_process_mrq(struct tmio_mmc_host *host,
struct mmc_request *mrq)
{
@@ -822,6 +777,8 @@
spin_lock_irqsave(&host->lock, flags);
+ tmio_mmc_end_dma(host);
+
mrq = host->mrq;
if (IS_ERR_OR_NULL(mrq)) {
spin_unlock_irqrestore(&host->lock, flags);
@@ -842,8 +799,8 @@
if (mrq->cmd->error || (mrq->data && mrq->data->error))
tmio_mmc_abort_dma(host);
- /* SCC error means retune, but executed command was still successful */
- if (host->check_scc_error && host->check_scc_error(host))
+ /* Error means retune, but executed command was still successful */
+ if (host->check_retune && host->check_retune(host))
mmc_retune_needed(host->mmc);
/* If SET_BLOCK_COUNT, continue with main command */
@@ -852,6 +809,9 @@
return;
}
+ if (host->fixup_request)
+ host->fixup_request(host, mrq);
+
mmc_request_done(host->mmc, mrq);
}
@@ -967,6 +927,9 @@
switch (ios->power_mode) {
case MMC_POWER_OFF:
tmio_mmc_power_off(host);
+ /* For R-Car Gen2+, we need to reset SDHI specific SCC */
+ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+ host->reset(host);
host->set_clock(host, 0);
break;
case MMC_POWER_UP:
@@ -1021,45 +984,13 @@
return blk_size;
}
-static int tmio_mmc_prepare_hs400_tuning(struct mmc_host *mmc,
- struct mmc_ios *ios)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
-
- if (host->prepare_hs400_tuning)
- host->prepare_hs400_tuning(host);
-
- return 0;
-}
-
-static void tmio_mmc_hs400_downgrade(struct mmc_host *mmc)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
-
- if (host->hs400_downgrade)
- host->hs400_downgrade(host);
-}
-
-static void tmio_mmc_hs400_complete(struct mmc_host *mmc)
-{
- struct tmio_mmc_host *host = mmc_priv(mmc);
-
- if (host->hs400_complete)
- host->hs400_complete(host);
-}
-
-static const struct mmc_host_ops tmio_mmc_ops = {
+static struct mmc_host_ops tmio_mmc_ops = {
.request = tmio_mmc_request,
.set_ios = tmio_mmc_set_ios,
.get_ro = tmio_mmc_get_ro,
.get_cd = tmio_mmc_get_cd,
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
.multi_io_quirk = tmio_multi_io_quirk,
- .hw_reset = tmio_mmc_hw_reset,
- .execute_tuning = tmio_mmc_execute_tuning,
- .prepare_hs400_tuning = tmio_mmc_prepare_hs400_tuning,
- .hs400_downgrade = tmio_mmc_hs400_downgrade,
- .hs400_complete = tmio_mmc_hs400_complete,
};
static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
@@ -1108,12 +1039,10 @@
{
struct tmio_mmc_host *host;
struct mmc_host *mmc;
- struct resource *res;
void __iomem *ctl;
int ret;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- ctl = devm_ioremap_resource(&pdev->dev, res);
+ ctl = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ctl))
return ERR_CAST(ctl);
@@ -1180,11 +1109,11 @@
* Look for a card detect GPIO, if it fails with anything
* else than a probe deferral, just live without it.
*/
- ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL);
+ ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0);
if (ret == -EPROBE_DEFER)
return ret;
- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_4_BIT_DATA | pdata->capabilities;
+ mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
mmc->caps2 |= pdata->capabilities2;
mmc->max_segs = pdata->max_segs ? : 32;
mmc->max_blk_size = TMIO_MAX_BLK_SIZE;
@@ -1205,9 +1134,6 @@
mmc->caps & MMC_CAP_NEEDS_POLL ||
!mmc_card_is_removable(mmc));
- if (!_host->reset)
- _host->reset = tmio_mmc_reset;
-
/*
* On Gen2+, eMMC with NONREMOVABLE currently fails because native
* hotplug gets disabled. It seems RuntimePM related yet we need further
@@ -1229,7 +1155,7 @@
_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
_host->set_clock(_host, 0);
- tmio_mmc_hw_reset(mmc);
+ tmio_mmc_reset(_host);
_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL);
@@ -1248,10 +1174,11 @@
/* See if we also get DMA */
tmio_mmc_request_dma(_host, pdata);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
ret = mmc_add_host(mmc);
if (ret)
@@ -1326,22 +1253,12 @@
}
EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_suspend);
-static bool tmio_mmc_can_retune(struct tmio_mmc_host *host)
-{
- return host->tap_num && mmc_can_retune(host->mmc);
-}
-
int tmio_mmc_host_runtime_resume(struct device *dev)
{
struct tmio_mmc_host *host = dev_get_drvdata(dev);
- if (!host->runtime_synced) {
- host->runtime_synced = true;
- return 0;
- }
-
tmio_mmc_clk_enable(host);
- tmio_mmc_hw_reset(host->mmc);
+ tmio_mmc_reset(host);
if (host->clk_cache)
host->set_clock(host, host->clk_cache);
@@ -1352,8 +1269,7 @@
tmio_mmc_enable_dma(host, true);
- if (tmio_mmc_can_retune(host) && host->select_tuning(host))
- dev_warn(&host->pdev->dev, "Tuning selection failed\n");
+ mmc_retune_needed(host->mmc);
return 0;
}
diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c
index b2e28ec..196e94b 100644
--- a/drivers/mmc/host/uniphier-sd.c
+++ b/drivers/mmc/host/uniphier-sd.c
@@ -59,7 +59,6 @@
struct uniphier_sd_priv {
struct tmio_mmc_data tmio_data;
struct pinctrl *pinctrl;
- struct pinctrl_state *pinstate_default;
struct pinctrl_state *pinstate_uhs;
struct clk *clk;
struct reset_control *rst;
@@ -410,8 +409,9 @@
clk_disable_unprepare(priv->clk);
}
-static void uniphier_sd_hw_reset(struct tmio_mmc_host *host)
+static void uniphier_sd_hw_reset(struct mmc_host *mmc)
{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
struct uniphier_sd_priv *priv = uniphier_sd_priv(host);
reset_control_assert(priv->rst_hw);
@@ -500,13 +500,12 @@
{
struct tmio_mmc_host *host = mmc_priv(mmc);
struct uniphier_sd_priv *priv = uniphier_sd_priv(host);
- struct pinctrl_state *pinstate;
+ struct pinctrl_state *pinstate = NULL;
u32 val, tmp;
switch (ios->signal_voltage) {
case MMC_SIGNAL_VOLTAGE_330:
val = UNIPHIER_SD_VOLT_330;
- pinstate = priv->pinstate_default;
break;
case MMC_SIGNAL_VOLTAGE_180:
val = UNIPHIER_SD_VOLT_180;
@@ -521,7 +520,10 @@
tmp |= FIELD_PREP(UNIPHIER_SD_VOLT_MASK, val);
writel(tmp, host->ctl + UNIPHIER_SD_VOLT);
- pinctrl_select_state(priv->pinctrl, pinstate);
+ if (pinstate)
+ pinctrl_select_state(priv->pinctrl, pinstate);
+ else
+ pinctrl_select_default_state(mmc_dev(mmc));
return 0;
}
@@ -533,11 +535,6 @@
if (IS_ERR(priv->pinctrl))
return PTR_ERR(priv->pinctrl);
- priv->pinstate_default = pinctrl_lookup_state(priv->pinctrl,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(priv->pinstate_default))
- return PTR_ERR(priv->pinstate_default);
-
priv->pinstate_uhs = pinctrl_lookup_state(priv->pinctrl, "uhs");
if (IS_ERR(priv->pinstate_uhs))
return PTR_ERR(priv->pinstate_uhs);
@@ -601,7 +598,7 @@
ret = PTR_ERR(priv->rst_hw);
goto free_host;
}
- host->hw_reset = uniphier_sd_hw_reset;
+ host->ops.hw_reset = uniphier_sd_hw_reset;
}
if (host->mmc->caps & MMC_CAP_UHS) {
@@ -691,6 +688,7 @@
.remove = uniphier_sd_remove,
.driver = {
.name = "uniphier-sd",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = uniphier_sd_match,
},
};
diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
index 96b0f81..b9b79b1 100644
--- a/drivers/mmc/host/usdhi6rol0.c
+++ b/drivers/mmc/host/usdhi6rol0.c
@@ -136,6 +136,8 @@
#define USDHI6_MIN_DMA 64
+#define USDHI6_REQ_TIMEOUT_MS 4000
+
enum usdhi6_wait_for {
USDHI6_WAIT_FOR_REQUEST,
USDHI6_WAIT_FOR_CMD,
@@ -199,7 +201,6 @@
/* Pin control */
struct pinctrl *pinctrl;
- struct pinctrl_state *pins_default;
struct pinctrl_state *pins_uhs;
};
@@ -677,12 +678,14 @@
};
int ret;
- host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx");
+ host->chan_tx = dma_request_chan(mmc_dev(host->mmc), "tx");
dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__,
host->chan_tx);
- if (!host->chan_tx)
+ if (IS_ERR(host->chan_tx)) {
+ host->chan_tx = NULL;
return;
+ }
cfg.direction = DMA_MEM_TO_DEV;
cfg.dst_addr = start + USDHI6_SD_BUF0;
@@ -692,12 +695,14 @@
if (ret < 0)
goto e_release_tx;
- host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
+ host->chan_rx = dma_request_chan(mmc_dev(host->mmc), "rx");
dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__,
host->chan_rx);
- if (!host->chan_rx)
+ if (IS_ERR(host->chan_rx)) {
+ host->chan_rx = NULL;
goto e_release_tx;
+ }
cfg.direction = DMA_DEV_TO_MEM;
cfg.src_addr = cfg.dst_addr;
@@ -1162,8 +1167,7 @@
host->pins_uhs);
default:
- return pinctrl_select_state(host->pinctrl,
- host->pins_default);
+ return pinctrl_select_default_state(mmc_dev(host->mmc));
}
}
@@ -1339,7 +1343,7 @@
host->wait = USDHI6_WAIT_FOR_STOP;
return 0;
}
- /* fall through - Unsupported STOP command. */
+ fallthrough; /* Unsupported STOP command */
default:
dev_err(mmc_dev(host->mmc),
"unsupported stop CMD%d for CMD%d\n",
@@ -1687,7 +1691,7 @@
switch (host->wait) {
default:
dev_err(mmc_dev(host->mmc), "Invalid state %u\n", host->wait);
- /* fall through - mrq can be NULL, but is impossible. */
+ fallthrough; /* mrq can be NULL, but is impossible */
case USDHI6_WAIT_FOR_CMD:
usdhi6_error_code(host);
if (mrq)
@@ -1709,7 +1713,7 @@
host->offset, data->blocks, data->blksz, data->sg_len,
sg_dma_len(sg), sg->offset);
usdhi6_sg_unmap(host, true);
- /* fall through - page unmapped in USDHI6_WAIT_FOR_DATA_END. */
+ fallthrough; /* page unmapped in USDHI6_WAIT_FOR_DATA_END */
case USDHI6_WAIT_FOR_DATA_END:
usdhi6_error_code(host);
data->error = -ETIMEDOUT;
@@ -1761,7 +1765,12 @@
host = mmc_priv(mmc);
host->mmc = mmc;
host->wait = USDHI6_WAIT_FOR_REQUEST;
- host->timeout = msecs_to_jiffies(4000);
+ host->timeout = msecs_to_jiffies(USDHI6_REQ_TIMEOUT_MS);
+ /*
+ * We use a fixed timeout of 4s, hence inform the core about it. A
+ * future improvement should instead respect the cmd->busy_timeout.
+ */
+ mmc->max_busy_timeout = USDHI6_REQ_TIMEOUT_MS;
host->pinctrl = devm_pinctrl_get(&pdev->dev);
if (IS_ERR(host->pinctrl)) {
@@ -1770,17 +1779,6 @@
}
host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs");
- if (!IS_ERR(host->pins_uhs)) {
- host->pins_default = pinctrl_lookup_state(host->pinctrl,
- PINCTRL_STATE_DEFAULT);
-
- if (IS_ERR(host->pins_default)) {
- dev_err(dev,
- "UHS pinctrl requires a default pin state.\n");
- ret = PTR_ERR(host->pins_default);
- goto e_free_mmc;
- }
- }
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->base = devm_ioremap_resource(dev, res);
@@ -1895,6 +1893,7 @@
.remove = usdhi6_remove,
.driver = {
.name = "usdhi6rol0",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = usdhi6_of_match,
},
};
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 721e5dd..f07c71d 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1114,7 +1114,7 @@
len = pci_resource_len(pcidev, 0);
base = pci_resource_start(pcidev, 0);
- sdhost->mmiobase = ioremap_nocache(base, len);
+ sdhost->mmiobase = ioremap(base, len);
if (!sdhost->mmiobase) {
ret = -ENOMEM;
goto free_mmc_host;
@@ -1223,9 +1223,7 @@
pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
}
-#ifdef CONFIG_PM
-
-static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
+static void __maybe_unused via_init_sdc_pm(struct via_crdr_mmc_host *host)
{
struct sdhcreg *pm_sdhcreg;
void __iomem *addrbase;
@@ -1259,33 +1257,30 @@
via_print_sdchc(host);
}
-static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
+static int __maybe_unused via_sd_suspend(struct device *dev)
{
struct via_crdr_mmc_host *host;
unsigned long flags;
- host = pci_get_drvdata(pcidev);
+ host = dev_get_drvdata(dev);
spin_lock_irqsave(&host->lock, flags);
via_save_pcictrlreg(host);
via_save_sdcreg(host);
spin_unlock_irqrestore(&host->lock, flags);
- pci_save_state(pcidev);
- pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
- pci_disable_device(pcidev);
- pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+ device_wakeup_enable(dev);
return 0;
}
-static int via_sd_resume(struct pci_dev *pcidev)
+static int __maybe_unused via_sd_resume(struct device *dev)
{
struct via_crdr_mmc_host *sdhost;
int ret = 0;
u8 gatt;
- sdhost = pci_get_drvdata(pcidev);
+ sdhost = dev_get_drvdata(dev);
gatt = VIA_CRDR_PCICLKGATT_PAD_PWRON;
if (sdhost->power == MMC_VDD_165_195)
@@ -1300,32 +1295,20 @@
msleep(100);
- pci_set_power_state(pcidev, PCI_D0);
- pci_restore_state(pcidev);
- ret = pci_enable_device(pcidev);
- if (ret)
- return ret;
-
via_restore_pcictrlreg(sdhost);
via_init_sdc_pm(sdhost);
return ret;
}
-#else /* CONFIG_PM */
-
-#define via_sd_suspend NULL
-#define via_sd_resume NULL
-
-#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(via_sd_pm_ops, via_sd_suspend, via_sd_resume);
static struct pci_driver via_sd_driver = {
.name = DRV_NAME,
.id_table = via_ids,
.probe = via_sd_probe,
.remove = via_sd_remove,
- .suspend = via_sd_suspend,
- .resume = via_sd_resume,
+ .driver.pm = &via_sd_pm_ops,
};
module_pci_driver(via_sd_driver);
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 156046e..97beece 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -95,7 +95,7 @@
u8 port_number;
u8 command_type;
u8 command_index;
- u8 command_response[0];
+ u8 command_response[];
} __packed;
struct sd_status_header {
@@ -576,7 +576,7 @@
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
- sizeof(vub300->system_port_status), HZ);
+ sizeof(vub300->system_port_status), 1000);
if (sizeof(vub300->system_port_status) == retval)
new_system_port_status(vub300);
}
@@ -1241,7 +1241,7 @@
SET_INTERRUPT_PSEUDOCODE,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, 0x0000, 0x0000,
- xfer_buffer, xfer_length, HZ);
+ xfer_buffer, xfer_length, 1000);
kfree(xfer_buffer);
if (retval < 0)
goto copy_error_message;
@@ -1284,7 +1284,7 @@
SET_TRANSFER_PSEUDOCODE,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE, 0x0000, 0x0000,
- xfer_buffer, xfer_length, HZ);
+ xfer_buffer, xfer_length, 1000);
kfree(xfer_buffer);
if (retval < 0)
goto copy_error_message;
@@ -1363,7 +1363,7 @@
int retval;
for (n = 0; n < sdio_funcs; n++) {
struct sdio_func *sf = card->sdio_func[n];
- l += snprintf(vub300->vub_name + l,
+ l += scnprintf(vub300->vub_name + l,
sizeof(vub300->vub_name) - l, "_%04X%04X",
sf->vendor, sf->device);
}
@@ -1991,7 +1991,7 @@
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_CLOCK_SPEED,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x00, 0x00, buf, buf_array_size, HZ);
+ 0x00, 0x00, buf, buf_array_size, 1000);
if (retval != 8) {
dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
" %dkHz failed with retval=%d\n", kHzClock, retval);
@@ -2013,14 +2013,14 @@
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_SD_POWER,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, 0x0000, NULL, 0, HZ);
+ 0x0000, 0x0000, NULL, 0, 1000);
/* must wait for the VUB300 u-proc to boot up */
msleep(600);
} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_SD_POWER,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0001, 0x0000, NULL, 0, HZ);
+ 0x0001, 0x0000, NULL, 0, 1000);
msleep(600);
vub300->card_powered = 1;
} else if (ios->power_mode == MMC_POWER_ON) {
@@ -2070,18 +2070,11 @@
kref_put(&vub300->kref, vub300_delete);
}
-static void vub300_init_card(struct mmc_host *mmc, struct mmc_card *card)
-{ /* NOT irq */
- struct vub300_mmc_host *vub300 = mmc_priv(mmc);
- dev_info(&vub300->udev->dev, "NO host QUIRKS for this card\n");
-}
-
static const struct mmc_host_ops vub300_mmc_ops = {
.request = vub300_mmc_request,
.set_ios = vub300_mmc_set_ios,
.get_ro = vub300_mmc_get_ro,
.enable_sdio_irq = vub300_enable_sdio_irq,
- .init_card = vub300_init_card,
};
static int vub300_probe(struct usb_interface *interface,
@@ -2282,14 +2275,14 @@
GET_HC_INF0,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->hc_info,
- sizeof(vub300->hc_info), HZ);
+ sizeof(vub300->hc_info), 1000);
if (retval < 0)
goto error5;
retval =
usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+ firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
if (retval < 0)
goto error5;
dev_info(&vub300->udev->dev,
@@ -2304,7 +2297,7 @@
GET_SYSTEM_PORT_STATUS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0000, 0x0000, &vub300->system_port_status,
- sizeof(vub300->system_port_status), HZ);
+ sizeof(vub300->system_port_status), 1000);
if (retval < 0) {
goto error4;
} else if (sizeof(vub300->system_port_status) == retval) {
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 740179f..cd63ea8 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -28,6 +28,8 @@
#include <linux/pnp.h>
#include <linux/highmem.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
@@ -770,22 +772,22 @@
* interrupts.
*/
switch (cmd->opcode) {
- case 11:
- case 17:
- case 18:
- case 20:
- case 24:
- case 25:
- case 26:
- case 27:
- case 30:
- case 42:
- case 56:
+ case SD_SWITCH_VOLTAGE:
+ case MMC_READ_SINGLE_BLOCK:
+ case MMC_READ_MULTIPLE_BLOCK:
+ case MMC_WRITE_DAT_UNTIL_STOP:
+ case MMC_WRITE_BLOCK:
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ case MMC_PROGRAM_CID:
+ case MMC_PROGRAM_CSD:
+ case MMC_SEND_WRITE_PROT:
+ case MMC_LOCK_UNLOCK:
+ case MMC_GEN_CMD:
break;
/* ACMDs. We don't keep track of state, so we just treat them
* like any other command. */
- case 51:
+ case SD_APP_SEND_SCR:
break;
default:
@@ -1903,6 +1905,7 @@
.resume = wbsd_platform_resume,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
};
diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index 2c4ba1f..cf10949 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -990,6 +990,7 @@
.remove = wmt_mci_remove,
.driver = {
.name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
.pm = wmt_mci_pm_ops,
.of_match_table = wmt_mci_dt_ids,
},