diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 3ece591..2f895a2 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -25,14 +25,17 @@
 
 /**
  * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
+ * @dev:    Consuming device
+ * @con_id: Function within the GPIO consumer
+ *
  * Some elder GPIO controllers need special quirks. Currently we handle
- * the Freescale GPIO controller with bindings that doesn't use the
+ * the Freescale and PPC GPIO controller with bindings that doesn't use the
  * established "cs-gpios" for chip selects but instead rely on
  * "gpios" for the chip select lines. If we detect this, we redirect
  * the counting of "cs-gpios" to count "gpios" transparent to the
  * driver.
  */
-int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
+static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
 {
 	struct device_node *np = dev->of_node;
 
@@ -41,7 +44,8 @@
 	if (!con_id || strcmp(con_id, "cs"))
 		return 0;
 	if (!of_device_is_compatible(np, "fsl,spi") &&
-	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
+	    !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
 		return 0;
 	return of_gpio_named_count(np, "gpios");
 }
@@ -50,7 +54,7 @@
  * This is used by external users of of_gpio_count() from <linux/of_gpio.h>
  *
  * FIXME: get rid of those external users by converting them to GPIO
- * descriptors and let them all use gpiod_get_count()
+ * descriptors and let them all use gpiod_count()
  */
 int of_gpio_get_count(struct device *dev, const char *con_id)
 {
@@ -111,8 +115,9 @@
 /**
  * of_gpio_need_valid_mask() - figure out if the OF GPIO driver needs
  * to set the .valid_mask
- * @dev: the device for the GPIO provider
- * @return: true if the valid mask needs to be set
+ * @gc: the target gpio_chip
+ *
+ * Return: true if the valid mask needs to be set
  */
 bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
 {
@@ -131,23 +136,6 @@
 				 int index)
 {
 	/*
-	 * Handle MMC "cd-inverted" and "wp-inverted" semantics.
-	 */
-	if (IS_ENABLED(CONFIG_MMC)) {
-		/*
-		 * Active low is the default according to the
-		 * SDHCI specification and the device tree
-		 * bindings. However the code in the current
-		 * kernel was written such that the phandle
-		 * flags were always respected, and "cd-inverted"
-		 * would invert the flag from the device phandle.
-		 */
-		if (!strcmp(propname, "cd-gpios")) {
-			if (of_property_read_bool(np, "cd-inverted"))
-				*flags ^= OF_GPIO_ACTIVE_LOW;
-		}
-	}
-	/*
 	 * Some GPIO fixed regulator quirks.
 	 * Note that active low is the default.
 	 */
@@ -157,18 +145,20 @@
 	     (!(strcmp(propname, "enable-gpio") &&
 		strcmp(propname, "enable-gpios")) &&
 	      of_device_is_compatible(np, "regulator-gpio")))) {
+		bool active_low = !of_property_read_bool(np,
+							 "enable-active-high");
 		/*
 		 * The regulator GPIO handles are specified such that the
 		 * presence or absence of "enable-active-high" solely controls
 		 * the polarity of the GPIO line. Any phandle flags must
 		 * be actively ignored.
 		 */
-		if (*flags & OF_GPIO_ACTIVE_LOW) {
+		if ((*flags & OF_GPIO_ACTIVE_LOW) && !active_low) {
 			pr_warn("%s GPIO handle specifies active low - ignored\n",
 				of_node_full_name(np));
 			*flags &= ~OF_GPIO_ACTIVE_LOW;
 		}
-		if (!of_property_read_bool(np, "enable-active-high"))
+		if (active_low)
 			*flags |= OF_GPIO_ACTIVE_LOW;
 	}
 	/*
@@ -358,6 +348,12 @@
 	if (transitory)
 		lflags |= GPIO_TRANSITORY;
 
+	if (flags & OF_GPIO_PULL_UP)
+		lflags |= GPIO_PULL_UP;
+
+	if (flags & OF_GPIO_PULL_DOWN)
+		lflags |= GPIO_PULL_DOWN;
+
 	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
 	if (ret < 0) {
 		gpiod_put(desc);
@@ -413,9 +409,10 @@
 	if (!IS_ENABLED(CONFIG_SPI_MASTER))
 		return ERR_PTR(-ENOENT);
 
-	/* Allow this specifically for Freescale devices */
+	/* Allow this specifically for Freescale and PPC devices */
 	if (!of_device_is_compatible(np, "fsl,spi") &&
-	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
+	    !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
 		return ERR_PTR(-ENOENT);
 	/* Allow only if asking for "cs-gpios" */
 	if (!con_id || strcmp(con_id, "cs"))
@@ -474,6 +471,24 @@
 	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
 }
 
+static struct gpio_desc *of_find_usb_gpio(struct device *dev,
+					  const char *con_id,
+					  enum of_gpio_flags *of_flags)
+{
+	/*
+	 * Currently this USB quirk is only for the Fairchild FUSB302 host which is using
+	 * an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios"
+	 * suffix.
+	 */
+	if (!IS_ENABLED(CONFIG_TYPEC_FUSB302))
+		return ERR_PTR(-ENOENT);
+
+	if (!con_id || strcmp(con_id, "fcs,int_n"))
+		return ERR_PTR(-ENOENT);
+
+	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
+}
+
 struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
 			       unsigned int idx, unsigned long *flags)
 {
@@ -498,26 +513,29 @@
 			break;
 	}
 
-	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+	if (PTR_ERR(desc) == -ENOENT) {
 		/* Special handling for SPI GPIOs if used */
 		desc = of_find_spi_gpio(dev, con_id, &of_flags);
 	}
 
-	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+	if (PTR_ERR(desc) == -ENOENT) {
 		/* This quirk looks up flags and all */
 		desc = of_find_spi_cs_gpio(dev, con_id, idx, flags);
 		if (!IS_ERR(desc))
 			return desc;
 	}
 
-	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT) {
+	if (PTR_ERR(desc) == -ENOENT) {
 		/* Special handling for regulator GPIOs if used */
 		desc = of_find_regulator_gpio(dev, con_id, &of_flags);
 	}
 
-	if (IS_ERR(desc) && PTR_ERR(desc) == -ENOENT)
+	if (PTR_ERR(desc) == -ENOENT)
 		desc = of_find_arizona_gpio(dev, con_id, &of_flags);
 
+	if (PTR_ERR(desc) == -ENOENT)
+		desc = of_find_usb_gpio(dev, con_id, &of_flags);
+
 	if (IS_ERR(desc))
 		return desc;
 
@@ -599,6 +617,10 @@
 		*lflags |= GPIO_ACTIVE_LOW;
 	if (xlate_flags & OF_GPIO_TRANSITORY)
 		*lflags |= GPIO_TRANSITORY;
+	if (xlate_flags & OF_GPIO_PULL_UP)
+		*lflags |= GPIO_PULL_UP;
+	if (xlate_flags & OF_GPIO_PULL_DOWN)
+		*lflags |= GPIO_PULL_DOWN;
 
 	if (of_property_read_bool(np, "input"))
 		*dflags |= GPIOD_IN;
@@ -619,6 +641,39 @@
 }
 
 /**
+ * of_gpiochip_add_hog - Add all hogs in a hog device node
+ * @chip:	gpio chip to act on
+ * @hog:	device node describing the hogs
+ *
+ * Returns error if it fails otherwise 0 on success.
+ */
+static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
+{
+	enum gpiod_flags dflags;
+	struct gpio_desc *desc;
+	unsigned long lflags;
+	const char *name;
+	unsigned int i;
+	int ret;
+
+	for (i = 0;; i++) {
+		desc = of_parse_own_gpio(hog, chip, i, &name, &lflags, &dflags);
+		if (IS_ERR(desc))
+			break;
+
+		ret = gpiod_hog(desc, name, lflags, dflags);
+		if (ret < 0)
+			return ret;
+
+#ifdef CONFIG_OF_DYNAMIC
+		desc->hog = hog;
+#endif
+	}
+
+	return 0;
+}
+
+/**
  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
  * @chip:	gpio chip to act on
  *
@@ -628,35 +683,109 @@
  */
 static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
 {
-	struct gpio_desc *desc = NULL;
 	struct device_node *np;
-	const char *name;
-	unsigned long lflags;
-	enum gpiod_flags dflags;
-	unsigned int i;
 	int ret;
 
 	for_each_available_child_of_node(chip->of_node, np) {
 		if (!of_property_read_bool(np, "gpio-hog"))
 			continue;
 
-		for (i = 0;; i++) {
-			desc = of_parse_own_gpio(np, chip, i, &name, &lflags,
-						 &dflags);
-			if (IS_ERR(desc))
-				break;
-
-			ret = gpiod_hog(desc, name, lflags, dflags);
-			if (ret < 0) {
-				of_node_put(np);
-				return ret;
-			}
+		ret = of_gpiochip_add_hog(chip, np);
+		if (ret < 0) {
+			of_node_put(np);
+			return ret;
 		}
+
+		of_node_set_flag(np, OF_POPULATED);
 	}
 
 	return 0;
 }
 
+#ifdef CONFIG_OF_DYNAMIC
+/**
+ * of_gpiochip_remove_hog - Remove all hogs in a hog device node
+ * @chip:	gpio chip to act on
+ * @hog:	device node describing the hogs
+ */
+static void of_gpiochip_remove_hog(struct gpio_chip *chip,
+				   struct device_node *hog)
+{
+	struct gpio_desc *descs = chip->gpiodev->descs;
+	unsigned int i;
+
+	for (i = 0; i < chip->ngpio; i++) {
+		if (test_bit(FLAG_IS_HOGGED, &descs[i].flags) &&
+		    descs[i].hog == hog)
+			gpiochip_free_own_desc(&descs[i]);
+	}
+}
+
+static int of_gpiochip_match_node(struct gpio_chip *chip, void *data)
+{
+	return chip->gpiodev->dev.of_node == data;
+}
+
+static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np)
+{
+	return gpiochip_find(np, of_gpiochip_match_node);
+}
+
+static int of_gpio_notify(struct notifier_block *nb, unsigned long action,
+			  void *arg)
+{
+	struct of_reconfig_data *rd = arg;
+	struct gpio_chip *chip;
+	int ret;
+
+	/*
+	 * This only supports adding and removing complete gpio-hog nodes.
+	 * Modifying an existing gpio-hog node is not supported (except for
+	 * changing its "status" property, which is treated the same as
+	 * addition/removal).
+	 */
+	switch (of_reconfig_get_state_change(action, arg)) {
+	case OF_RECONFIG_CHANGE_ADD:
+		if (!of_property_read_bool(rd->dn, "gpio-hog"))
+			return NOTIFY_OK;	/* not for us */
+
+		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
+		chip = of_find_gpiochip_by_node(rd->dn->parent);
+		if (chip == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		ret = of_gpiochip_add_hog(chip, rd->dn);
+		if (ret < 0) {
+			pr_err("%s: failed to add hogs for %pOF\n", __func__,
+			       rd->dn);
+			of_node_clear_flag(rd->dn, OF_POPULATED);
+			return notifier_from_errno(ret);
+		}
+		break;
+
+	case OF_RECONFIG_CHANGE_REMOVE:
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;	/* already depopulated */
+
+		chip = of_find_gpiochip_by_node(rd->dn->parent);
+		if (chip == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		of_gpiochip_remove_hog(chip, rd->dn);
+		of_node_clear_flag(rd->dn, OF_POPULATED);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block gpio_of_notifier = {
+	.notifier_call = of_gpio_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */
+
 /**
  * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags
  * @gc:		pointer to the gpio_chip structure
@@ -897,11 +1026,6 @@
 	if (ret)
 		return ret;
 
-	/* If the chip defines names itself, these take precedence */
-	if (!chip->names)
-		devprop_gpiochip_set_names(chip,
-					   of_fwnode_handle(chip->of_node));
-
 	of_node_get(chip->of_node);
 
 	ret = of_gpiochip_scan_gpios(chip);