Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index 0fd6f97..bcb90d8 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -4,7 +4,7 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SCCB || REGMAP_I3C)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SCCB || REGMAP_I3C || REGMAP_SPI_AVMM)
select IRQ_DOMAIN if REGMAP_IRQ
bool
@@ -53,3 +53,7 @@
config REGMAP_I3C
tristate
depends on I3C
+
+config REGMAP_SPI_AVMM
+ tristate
+ depends on SPI
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index ff6c7d8..ac1b69e 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -17,3 +17,4 @@
obj-$(CONFIG_REGMAP_SOUNDWIRE) += regmap-sdw.o
obj-$(CONFIG_REGMAP_SCCB) += regmap-sccb.o
obj-$(CONFIG_REGMAP_I3C) += regmap-i3c.o
+obj-$(CONFIG_REGMAP_SPI_AVMM) += regmap-spi-avmm.o
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index d7c01b7..0097696 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -161,6 +161,9 @@
void *selector_work_buf; /* Scratch buffer used for selector */
struct hwspinlock *hwlock;
+
+ /* if set, the regmap core can sleep */
+ bool can_sleep;
};
struct regcache_ops {
@@ -217,7 +220,7 @@
#ifdef CONFIG_DEBUG_FS
extern void regmap_debugfs_initcall(void);
-extern void regmap_debugfs_init(struct regmap *map, const char *name);
+extern void regmap_debugfs_init(struct regmap *map);
extern void regmap_debugfs_exit(struct regmap *map);
static inline void regmap_debugfs_disable(struct regmap *map)
@@ -227,7 +230,7 @@
#else
static inline void regmap_debugfs_initcall(void) { }
-static inline void regmap_debugfs_init(struct regmap *map, const char *name) { }
+static inline void regmap_debugfs_init(struct regmap *map) { }
static inline void regmap_debugfs_exit(struct regmap *map) { }
static inline void regmap_debugfs_disable(struct regmap *map) { }
#endif
diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c
index cfa29dc..fabf870 100644
--- a/drivers/base/regmap/regcache-rbtree.c
+++ b/drivers/base/regmap/regcache-rbtree.c
@@ -281,14 +281,14 @@
if (!blk)
return -ENOMEM;
+ rbnode->block = blk;
+
if (BITS_TO_LONGS(blklen) > BITS_TO_LONGS(rbnode->blklen)) {
present = krealloc(rbnode->cache_present,
BITS_TO_LONGS(blklen) * sizeof(*present),
GFP_KERNEL);
- if (!present) {
- kfree(blk);
+ if (!present)
return -ENOMEM;
- }
memset(present + BITS_TO_LONGS(rbnode->blklen), 0,
(BITS_TO_LONGS(blklen) - BITS_TO_LONGS(rbnode->blklen))
@@ -305,7 +305,6 @@
}
/* update the rbnode block, its size and the base register */
- rbnode->block = blk;
rbnode->blklen = blklen;
rbnode->base_reg = base_reg;
rbnode->cache_present = present;
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index 4f2ff1b..211a335 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -17,7 +17,6 @@
struct regmap_debugfs_node {
struct regmap *map;
- const char *name;
struct list_head link;
};
@@ -184,7 +183,7 @@
{
/* Calculate the length of a fixed format */
if (!map->debugfs_tot_len) {
- map->debugfs_reg_len = regmap_calc_reg_len(map->max_register),
+ map->debugfs_reg_len = regmap_calc_reg_len(map->max_register);
map->debugfs_val_len = 2 * map->format.val_bytes;
map->debugfs_tot_len = map->debugfs_reg_len +
map->debugfs_val_len + 3; /* : \n */
@@ -544,11 +543,12 @@
.write = regmap_cache_bypass_write_file,
};
-void regmap_debugfs_init(struct regmap *map, const char *name)
+void regmap_debugfs_init(struct regmap *map)
{
struct rb_node *next;
struct regmap_range_node *range_node;
const char *devname = "dummy";
+ const char *name = map->name;
/*
* Userspace can initiate reads from the hardware over debugfs.
@@ -569,7 +569,6 @@
if (!node)
return;
node->map = map;
- node->name = name;
mutex_lock(®map_debugfs_early_lock);
list_add(&node->link, ®map_debugfs_early_list);
mutex_unlock(®map_debugfs_early_lock);
@@ -685,7 +684,7 @@
mutex_lock(®map_debugfs_early_lock);
list_for_each_entry_safe(node, tmp, ®map_debugfs_early_list, link) {
- regmap_debugfs_init(node->map, node->name);
+ regmap_debugfs_init(node->map);
list_del(&node->link);
kfree(node);
}
diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
index ac9b31c..62b95a9 100644
--- a/drivers/base/regmap/regmap-i2c.c
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -43,7 +43,7 @@
return i2c_smbus_write_byte_data(i2c, reg, val);
}
-static struct regmap_bus regmap_smbus_byte = {
+static const struct regmap_bus regmap_smbus_byte = {
.reg_write = regmap_smbus_byte_reg_write,
.reg_read = regmap_smbus_byte_reg_read,
};
@@ -79,7 +79,7 @@
return i2c_smbus_write_word_data(i2c, reg, val);
}
-static struct regmap_bus regmap_smbus_word = {
+static const struct regmap_bus regmap_smbus_word = {
.reg_write = regmap_smbus_word_reg_write,
.reg_read = regmap_smbus_word_reg_read,
};
@@ -115,7 +115,7 @@
return i2c_smbus_write_word_swapped(i2c, reg, val);
}
-static struct regmap_bus regmap_smbus_word_swapped = {
+static const struct regmap_bus regmap_smbus_word_swapped = {
.reg_write = regmap_smbus_word_write_swapped,
.reg_read = regmap_smbus_word_read_swapped,
};
@@ -197,7 +197,7 @@
return -EIO;
}
-static struct regmap_bus regmap_i2c = {
+static const struct regmap_bus regmap_i2c = {
.write = regmap_i2c_write,
.gather_write = regmap_i2c_gather_write,
.read = regmap_i2c_read,
@@ -239,13 +239,70 @@
return -EIO;
}
-static struct regmap_bus regmap_i2c_smbus_i2c_block = {
+static const struct regmap_bus regmap_i2c_smbus_i2c_block = {
.write = regmap_i2c_smbus_i2c_write,
.read = regmap_i2c_smbus_i2c_read,
.max_raw_read = I2C_SMBUS_BLOCK_MAX,
.max_raw_write = I2C_SMBUS_BLOCK_MAX,
};
+static int regmap_i2c_smbus_i2c_write_reg16(void *context, const void *data,
+ size_t count)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (count < 2)
+ return -EINVAL;
+
+ count--;
+ return i2c_smbus_write_i2c_block_data(i2c, ((u8 *)data)[0], count,
+ (u8 *)data + 1);
+}
+
+static int regmap_i2c_smbus_i2c_read_reg16(void *context, const void *reg,
+ size_t reg_size, void *val,
+ size_t val_size)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ int ret, count, len = val_size;
+
+ if (reg_size != 2)
+ return -EINVAL;
+
+ ret = i2c_smbus_write_byte_data(i2c, ((u16 *)reg)[0] & 0xff,
+ ((u16 *)reg)[0] >> 8);
+ if (ret < 0)
+ return ret;
+
+ count = 0;
+ do {
+ /* Current Address Read */
+ ret = i2c_smbus_read_byte(i2c);
+ if (ret < 0)
+ break;
+
+ *((u8 *)val++) = ret;
+ count++;
+ len--;
+ } while (len > 0);
+
+ if (count == val_size)
+ return 0;
+ else if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+static const struct regmap_bus regmap_i2c_smbus_i2c_block_reg16 = {
+ .write = regmap_i2c_smbus_i2c_write_reg16,
+ .read = regmap_i2c_smbus_i2c_read_reg16,
+ .max_raw_read = I2C_SMBUS_BLOCK_MAX,
+ .max_raw_write = I2C_SMBUS_BLOCK_MAX,
+};
+
static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
const struct regmap_config *config)
{
@@ -255,6 +312,10 @@
i2c_check_functionality(i2c->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK))
return ®map_i2c_smbus_i2c_block;
+ else if (config->val_bits == 8 && config->reg_bits == 16 &&
+ i2c_check_functionality(i2c->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ return ®map_i2c_smbus_i2c_block_reg16;
else if (config->val_bits == 16 && config->reg_bits == 8 &&
i2c_check_functionality(i2c->adapter,
I2C_FUNC_SMBUS_WORD_DATA))
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 3d64c93..87c5c42 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -168,6 +168,12 @@
ret = regmap_write(map, reg, ~d->mask_buf[i]);
else
ret = regmap_write(map, reg, d->mask_buf[i]);
+ if (d->chip->clear_ack) {
+ if (d->chip->ack_invert && !ret)
+ ret = regmap_write(map, reg, UINT_MAX);
+ else if (!ret)
+ ret = regmap_write(map, reg, 0);
+ }
if (ret != 0)
dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -493,7 +499,18 @@
if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
reg = chip->ack_base +
(i * map->reg_stride * data->irq_reg_stride);
- ret = regmap_write(map, reg, data->status_buf[i]);
+ if (chip->ack_invert)
+ ret = regmap_write(map, reg,
+ ~data->status_buf[i]);
+ else
+ ret = regmap_write(map, reg,
+ data->status_buf[i]);
+ if (chip->clear_ack) {
+ if (chip->ack_invert && !ret)
+ ret = regmap_write(map, reg, UINT_MAX);
+ else if (!ret)
+ ret = regmap_write(map, reg, 0);
+ }
if (ret != 0)
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -541,8 +558,9 @@
};
/**
- * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ * regmap_add_irq_chip_fwnode() - Use standard regmap IRQ controller handling
*
+ * @fwnode: The firmware node where the IRQ domain should be added to.
* @map: The regmap for the device.
* @irq: The IRQ the device uses to signal interrupts.
* @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -556,9 +574,11 @@
* register cache. The chip driver is responsible for restoring the
* register values used by the IRQ controller over suspend and resume.
*/
-int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
- int irq_base, const struct regmap_irq_chip *chip,
- struct regmap_irq_chip_data **data)
+int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
+ struct regmap *map, int irq,
+ int irq_flags, int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data *d;
int i;
@@ -719,6 +739,12 @@
else
ret = regmap_write(map, reg,
d->status_buf[i] & d->mask_buf[i]);
+ if (chip->clear_ack) {
+ if (chip->ack_invert && !ret)
+ ret = regmap_write(map, reg, UINT_MAX);
+ else if (!ret)
+ ret = regmap_write(map, reg, 0);
+ }
if (ret != 0) {
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -769,11 +795,11 @@
}
if (irq_base)
- d->domain = irq_domain_add_legacy(map->dev->of_node,
- chip->num_irqs, irq_base, 0,
- ®map_domain_ops, d);
+ d->domain = irq_domain_add_legacy(to_of_node(fwnode),
+ chip->num_irqs, irq_base,
+ 0, ®map_domain_ops, d);
else
- d->domain = irq_domain_add_linear(map->dev->of_node,
+ d->domain = irq_domain_add_linear(to_of_node(fwnode),
chip->num_irqs,
®map_domain_ops, d);
if (!d->domain) {
@@ -808,6 +834,30 @@
kfree(d);
return ret;
}
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip_fwnode);
+
+/**
+ * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ *
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * This is the same as regmap_add_irq_chip_fwnode, except that the firmware
+ * node of the regmap is used.
+ */
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+ int irq_base, const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
+{
+ return regmap_add_irq_chip_fwnode(dev_fwnode(map->dev), map, irq,
+ irq_flags, irq_base, chip, data);
+}
EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
/**
@@ -875,6 +925,52 @@
}
/**
+ * devm_regmap_add_irq_chip_fwnode() - Resource managed regmap_add_irq_chip_fwnode()
+ *
+ * @dev: The device pointer on which irq_chip belongs to.
+ * @fwnode: The firmware node where the IRQ domain should be added to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * The ®map_irq_chip_data will be automatically released when the device is
+ * unbound.
+ */
+int devm_regmap_add_irq_chip_fwnode(struct device *dev,
+ struct fwnode_handle *fwnode,
+ struct regmap *map, int irq,
+ int irq_flags, int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
+{
+ struct regmap_irq_chip_data **ptr, *d;
+ int ret;
+
+ ptr = devres_alloc(devm_regmap_irq_chip_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = regmap_add_irq_chip_fwnode(fwnode, map, irq, irq_flags, irq_base,
+ chip, &d);
+ if (ret < 0) {
+ devres_free(ptr);
+ return ret;
+ }
+
+ *ptr = d;
+ devres_add(dev, ptr);
+ *data = d;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip_fwnode);
+
+/**
* devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
*
* @dev: The device pointer on which irq_chip belongs to.
@@ -895,25 +991,9 @@
const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data)
{
- struct regmap_irq_chip_data **ptr, *d;
- int ret;
-
- ptr = devres_alloc(devm_regmap_irq_chip_release, sizeof(*ptr),
- GFP_KERNEL);
- if (!ptr)
- return -ENOMEM;
-
- ret = regmap_add_irq_chip(map, irq, irq_flags, irq_base,
- chip, &d);
- if (ret < 0) {
- devres_free(ptr);
- return ret;
- }
-
- *ptr = d;
- devres_add(dev, ptr);
- *data = d;
- return 0;
+ return devm_regmap_add_irq_chip_fwnode(dev, dev_fwnode(map->dev), map,
+ irq, irq_flags, irq_base, chip,
+ data);
}
EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
diff --git a/drivers/base/regmap/regmap-sdw.c b/drivers/base/regmap/regmap-sdw.c
index e75168b..4b8d2d0 100644
--- a/drivers/base/regmap/regmap-sdw.c
+++ b/drivers/base/regmap/regmap-sdw.c
@@ -2,7 +2,6 @@
// Copyright(c) 2015-17 Intel Corporation.
#include <linux/device.h>
-#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/soundwire/sdw.h>
#include "internal.h"
diff --git a/drivers/base/regmap/regmap-spi-avmm.c b/drivers/base/regmap/regmap-spi-avmm.c
new file mode 100644
index 0000000..ad1da83
--- /dev/null
+++ b/drivers/base/regmap/regmap-spi-avmm.c
@@ -0,0 +1,719 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - SPI AVMM support
+//
+// Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+/*
+ * This driver implements the regmap operations for a generic SPI
+ * master to access the registers of the spi slave chip which has an
+ * Avalone bus in it.
+ *
+ * The "SPI slave to Avalon Master Bridge" (spi-avmm) IP should be integrated
+ * in the spi slave chip. The IP acts as a bridge to convert encoded streams of
+ * bytes from the host to the internal register read/write on Avalon bus. In
+ * order to issue register access requests to the slave chip, the host should
+ * send formatted bytes that conform to the transfer protocol.
+ * The transfer protocol contains 3 layers: transaction layer, packet layer
+ * and physical layer.
+ *
+ * Reference Documents could be found at:
+ * https://www.intel.com/content/www/us/en/programmable/documentation/sfo1400787952932.html
+ *
+ * Chapter "SPI Slave/JTAG to Avalon Master Bridge Cores" is a general
+ * introduction to the protocol.
+ *
+ * Chapter "Avalon Packets to Transactions Converter Core" describes
+ * the transaction layer.
+ *
+ * Chapter "Avalon-ST Bytes to Packets and Packets to Bytes Converter Cores"
+ * describes the packet layer.
+ *
+ * Chapter "Avalon-ST Serial Peripheral Interface Core" describes the
+ * physical layer.
+ *
+ *
+ * When host issues a regmap read/write, the driver will transform the request
+ * to byte stream layer by layer. It formats the register addr, value and
+ * length to the transaction layer request, then converts the request to packet
+ * layer bytes stream and then to physical layer bytes stream. Finally the
+ * driver sends the formatted byte stream over SPI bus to the slave chip.
+ *
+ * The spi-avmm IP on the slave chip decodes the byte stream and initiates
+ * register read/write on its internal Avalon bus, and then encodes the
+ * response to byte stream and sends back to host.
+ *
+ * The driver receives the byte stream, reverses the 3 layers transformation,
+ * and finally gets the response value (read out data for register read,
+ * successful written size for register write).
+ */
+
+#define PKT_SOP 0x7a
+#define PKT_EOP 0x7b
+#define PKT_CHANNEL 0x7c
+#define PKT_ESC 0x7d
+
+#define PHY_IDLE 0x4a
+#define PHY_ESC 0x4d
+
+#define TRANS_CODE_WRITE 0x0
+#define TRANS_CODE_SEQ_WRITE 0x4
+#define TRANS_CODE_READ 0x10
+#define TRANS_CODE_SEQ_READ 0x14
+#define TRANS_CODE_NO_TRANS 0x7f
+
+#define SPI_AVMM_XFER_TIMEOUT (msecs_to_jiffies(200))
+
+/* slave's register addr is 32 bits */
+#define SPI_AVMM_REG_SIZE 4UL
+/* slave's register value is 32 bits */
+#define SPI_AVMM_VAL_SIZE 4UL
+
+/*
+ * max rx size could be larger. But considering the buffer consuming,
+ * it is proper that we limit 1KB xfer at max.
+ */
+#define MAX_READ_CNT 256UL
+#define MAX_WRITE_CNT 1UL
+
+struct trans_req_header {
+ u8 code;
+ u8 rsvd;
+ __be16 size;
+ __be32 addr;
+} __packed;
+
+struct trans_resp_header {
+ u8 r_code;
+ u8 rsvd;
+ __be16 size;
+} __packed;
+
+#define TRANS_REQ_HD_SIZE (sizeof(struct trans_req_header))
+#define TRANS_RESP_HD_SIZE (sizeof(struct trans_resp_header))
+
+/*
+ * In transaction layer,
+ * the write request format is: Transaction request header + data
+ * the read request format is: Transaction request header
+ * the write response format is: Transaction response header
+ * the read response format is: pure data, no Transaction response header
+ */
+#define TRANS_WR_TX_SIZE(n) (TRANS_REQ_HD_SIZE + SPI_AVMM_VAL_SIZE * (n))
+#define TRANS_RD_TX_SIZE TRANS_REQ_HD_SIZE
+#define TRANS_TX_MAX TRANS_WR_TX_SIZE(MAX_WRITE_CNT)
+
+#define TRANS_RD_RX_SIZE(n) (SPI_AVMM_VAL_SIZE * (n))
+#define TRANS_WR_RX_SIZE TRANS_RESP_HD_SIZE
+#define TRANS_RX_MAX TRANS_RD_RX_SIZE(MAX_READ_CNT)
+
+/* tx & rx share one transaction layer buffer */
+#define TRANS_BUF_SIZE ((TRANS_TX_MAX > TRANS_RX_MAX) ? \
+ TRANS_TX_MAX : TRANS_RX_MAX)
+
+/*
+ * In tx phase, the host prepares all the phy layer bytes of a request in the
+ * phy buffer and sends them in a batch.
+ *
+ * The packet layer and physical layer defines several special chars for
+ * various purpose, when a transaction layer byte hits one of these special
+ * chars, it should be escaped. The escape rule is, "Escape char first,
+ * following the byte XOR'ed with 0x20".
+ *
+ * This macro defines the max possible length of the phy data. In the worst
+ * case, all transaction layer bytes need to be escaped (so the data length
+ * doubles), plus 4 special chars (SOP, CHANNEL, CHANNEL_NUM, EOP). Finally
+ * we should make sure the length is aligned to SPI BPW.
+ */
+#define PHY_TX_MAX ALIGN(2 * TRANS_TX_MAX + 4, 4)
+
+/*
+ * Unlike tx, phy rx is affected by possible PHY_IDLE bytes from slave, the max
+ * length of the rx bit stream is unpredictable. So the driver reads the words
+ * one by one, and parses each word immediately into transaction layer buffer.
+ * Only one word length of phy buffer is used for rx.
+ */
+#define PHY_BUF_SIZE PHY_TX_MAX
+
+/**
+ * struct spi_avmm_bridge - SPI slave to AVMM bus master bridge
+ *
+ * @spi: spi slave associated with this bridge.
+ * @word_len: bytes of word for spi transfer.
+ * @trans_len: length of valid data in trans_buf.
+ * @phy_len: length of valid data in phy_buf.
+ * @trans_buf: the bridge buffer for transaction layer data.
+ * @phy_buf: the bridge buffer for physical layer data.
+ * @swap_words: the word swapping cb for phy data. NULL if not needed.
+ *
+ * As a device's registers are implemented on the AVMM bus address space, it
+ * requires the driver to issue formatted requests to spi slave to AVMM bus
+ * master bridge to perform register access.
+ */
+struct spi_avmm_bridge {
+ struct spi_device *spi;
+ unsigned char word_len;
+ unsigned int trans_len;
+ unsigned int phy_len;
+ /* bridge buffer used in translation between protocol layers */
+ char trans_buf[TRANS_BUF_SIZE];
+ char phy_buf[PHY_BUF_SIZE];
+ void (*swap_words)(char *buf, unsigned int len);
+};
+
+static void br_swap_words_32(char *buf, unsigned int len)
+{
+ u32 *p = (u32 *)buf;
+ unsigned int count;
+
+ count = len / 4;
+ while (count--) {
+ *p = swab32p(p);
+ p++;
+ }
+}
+
+/*
+ * Format transaction layer data in br->trans_buf according to the register
+ * access request, Store valid transaction layer data length in br->trans_len.
+ */
+static int br_trans_tx_prepare(struct spi_avmm_bridge *br, bool is_read, u32 reg,
+ u32 *wr_val, u32 count)
+{
+ struct trans_req_header *header;
+ unsigned int trans_len;
+ u8 code;
+ __le32 *data;
+ int i;
+
+ if (is_read) {
+ if (count == 1)
+ code = TRANS_CODE_READ;
+ else
+ code = TRANS_CODE_SEQ_READ;
+ } else {
+ if (count == 1)
+ code = TRANS_CODE_WRITE;
+ else
+ code = TRANS_CODE_SEQ_WRITE;
+ }
+
+ header = (struct trans_req_header *)br->trans_buf;
+ header->code = code;
+ header->rsvd = 0;
+ header->size = cpu_to_be16((u16)count * SPI_AVMM_VAL_SIZE);
+ header->addr = cpu_to_be32(reg);
+
+ trans_len = TRANS_REQ_HD_SIZE;
+
+ if (!is_read) {
+ trans_len += SPI_AVMM_VAL_SIZE * count;
+ if (trans_len > sizeof(br->trans_buf))
+ return -ENOMEM;
+
+ data = (__le32 *)(br->trans_buf + TRANS_REQ_HD_SIZE);
+
+ for (i = 0; i < count; i++)
+ *data++ = cpu_to_le32(*wr_val++);
+ }
+
+ /* Store valid trans data length for next layer */
+ br->trans_len = trans_len;
+
+ return 0;
+}
+
+/*
+ * Convert transaction layer data (in br->trans_buf) to phy layer data, store
+ * them in br->phy_buf. Pad the phy_buf aligned with SPI's BPW. Store valid phy
+ * layer data length in br->phy_len.
+ *
+ * phy_buf len should be aligned with SPI's BPW. Spare bytes should be padded
+ * with PHY_IDLE, then the slave will just drop them.
+ *
+ * The driver will not simply pad 4a at the tail. The concern is that driver
+ * will not store MISO data during tx phase, if the driver pads 4a at the tail,
+ * it is possible that if the slave is fast enough to response at the padding
+ * time. As a result these rx bytes are lost. In the following case, 7a,7c,00
+ * will lost.
+ * MOSI ...|7a|7c|00|10| |00|00|04|02| |4b|7d|5a|7b| |40|4a|4a|4a| |XX|XX|...
+ * MISO ...|4a|4a|4a|4a| |4a|4a|4a|4a| |4a|4a|4a|4a| |4a|7a|7c|00| |78|56|...
+ *
+ * So the driver moves EOP and bytes after EOP to the end of the aligned size,
+ * then fill the hole with PHY_IDLE. As following:
+ * before pad ...|7a|7c|00|10| |00|00|04|02| |4b|7d|5a|7b| |40|
+ * after pad ...|7a|7c|00|10| |00|00|04|02| |4b|7d|5a|4a| |4a|4a|7b|40|
+ * Then if the slave will not get the entire packet before the tx phase is
+ * over, it can't responsed to anything either.
+ */
+static int br_pkt_phy_tx_prepare(struct spi_avmm_bridge *br)
+{
+ char *tb, *tb_end, *pb, *pb_limit, *pb_eop = NULL;
+ unsigned int aligned_phy_len, move_size;
+ bool need_esc = false;
+
+ tb = br->trans_buf;
+ tb_end = tb + br->trans_len;
+ pb = br->phy_buf;
+ pb_limit = pb + ARRAY_SIZE(br->phy_buf);
+
+ *pb++ = PKT_SOP;
+
+ /*
+ * The driver doesn't support multiple channels so the channel number
+ * is always 0.
+ */
+ *pb++ = PKT_CHANNEL;
+ *pb++ = 0x0;
+
+ for (; pb < pb_limit && tb < tb_end; pb++) {
+ if (need_esc) {
+ *pb = *tb++ ^ 0x20;
+ need_esc = false;
+ continue;
+ }
+
+ /* EOP should be inserted before the last valid char */
+ if (tb == tb_end - 1 && !pb_eop) {
+ *pb = PKT_EOP;
+ pb_eop = pb;
+ continue;
+ }
+
+ /*
+ * insert an ESCAPE char if the data value equals any special
+ * char.
+ */
+ switch (*tb) {
+ case PKT_SOP:
+ case PKT_EOP:
+ case PKT_CHANNEL:
+ case PKT_ESC:
+ *pb = PKT_ESC;
+ need_esc = true;
+ break;
+ case PHY_IDLE:
+ case PHY_ESC:
+ *pb = PHY_ESC;
+ need_esc = true;
+ break;
+ default:
+ *pb = *tb++;
+ break;
+ }
+ }
+
+ /* The phy buffer is used out but transaction layer data remains */
+ if (tb < tb_end)
+ return -ENOMEM;
+
+ /* Store valid phy data length for spi transfer */
+ br->phy_len = pb - br->phy_buf;
+
+ if (br->word_len == 1)
+ return 0;
+
+ /* Do phy buf padding if word_len > 1 byte. */
+ aligned_phy_len = ALIGN(br->phy_len, br->word_len);
+ if (aligned_phy_len > sizeof(br->phy_buf))
+ return -ENOMEM;
+
+ if (aligned_phy_len == br->phy_len)
+ return 0;
+
+ /* move EOP and bytes after EOP to the end of aligned size */
+ move_size = pb - pb_eop;
+ memmove(&br->phy_buf[aligned_phy_len - move_size], pb_eop, move_size);
+
+ /* fill the hole with PHY_IDLEs */
+ memset(pb_eop, PHY_IDLE, aligned_phy_len - br->phy_len);
+
+ /* update the phy data length */
+ br->phy_len = aligned_phy_len;
+
+ return 0;
+}
+
+/*
+ * In tx phase, the slave only returns PHY_IDLE (0x4a). So the driver will
+ * ignore rx in tx phase.
+ */
+static int br_do_tx(struct spi_avmm_bridge *br)
+{
+ /* reorder words for spi transfer */
+ if (br->swap_words)
+ br->swap_words(br->phy_buf, br->phy_len);
+
+ /* send all data in phy_buf */
+ return spi_write(br->spi, br->phy_buf, br->phy_len);
+}
+
+/*
+ * This function read the rx byte stream from SPI word by word and convert
+ * them to transaction layer data in br->trans_buf. It also stores the length
+ * of rx transaction layer data in br->trans_len
+ *
+ * The slave may send an unknown number of PHY_IDLEs in rx phase, so we cannot
+ * prepare a fixed length buffer to receive all of the rx data in a batch. We
+ * have to read word by word and convert them to transaction layer data at
+ * once.
+ */
+static int br_do_rx_and_pkt_phy_parse(struct spi_avmm_bridge *br)
+{
+ bool eop_found = false, channel_found = false, esc_found = false;
+ bool valid_word = false, last_try = false;
+ struct device *dev = &br->spi->dev;
+ char *pb, *tb_limit, *tb = NULL;
+ unsigned long poll_timeout;
+ int ret, i;
+
+ tb_limit = br->trans_buf + ARRAY_SIZE(br->trans_buf);
+ pb = br->phy_buf;
+ poll_timeout = jiffies + SPI_AVMM_XFER_TIMEOUT;
+ while (tb < tb_limit) {
+ ret = spi_read(br->spi, pb, br->word_len);
+ if (ret)
+ return ret;
+
+ /* reorder the word back */
+ if (br->swap_words)
+ br->swap_words(pb, br->word_len);
+
+ valid_word = false;
+ for (i = 0; i < br->word_len; i++) {
+ /* drop everything before first SOP */
+ if (!tb && pb[i] != PKT_SOP)
+ continue;
+
+ /* drop PHY_IDLE */
+ if (pb[i] == PHY_IDLE)
+ continue;
+
+ valid_word = true;
+
+ /*
+ * We don't support multiple channels, so error out if
+ * a non-zero channel number is found.
+ */
+ if (channel_found) {
+ if (pb[i] != 0) {
+ dev_err(dev, "%s channel num != 0\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ channel_found = false;
+ continue;
+ }
+
+ switch (pb[i]) {
+ case PKT_SOP:
+ /*
+ * reset the parsing if a second SOP appears.
+ */
+ tb = br->trans_buf;
+ eop_found = false;
+ channel_found = false;
+ esc_found = false;
+ break;
+ case PKT_EOP:
+ /*
+ * No special char is expected after ESC char.
+ * No special char (except ESC & PHY_IDLE) is
+ * expected after EOP char.
+ *
+ * The special chars are all dropped.
+ */
+ if (esc_found || eop_found)
+ return -EFAULT;
+
+ eop_found = true;
+ break;
+ case PKT_CHANNEL:
+ if (esc_found || eop_found)
+ return -EFAULT;
+
+ channel_found = true;
+ break;
+ case PKT_ESC:
+ case PHY_ESC:
+ if (esc_found)
+ return -EFAULT;
+
+ esc_found = true;
+ break;
+ default:
+ /* Record the normal byte in trans_buf. */
+ if (esc_found) {
+ *tb++ = pb[i] ^ 0x20;
+ esc_found = false;
+ } else {
+ *tb++ = pb[i];
+ }
+
+ /*
+ * We get the last normal byte after EOP, it is
+ * time we finish. Normally the function should
+ * return here.
+ */
+ if (eop_found) {
+ br->trans_len = tb - br->trans_buf;
+ return 0;
+ }
+ }
+ }
+
+ if (valid_word) {
+ /* update poll timeout when we get valid word */
+ poll_timeout = jiffies + SPI_AVMM_XFER_TIMEOUT;
+ last_try = false;
+ } else {
+ /*
+ * We timeout when rx keeps invalid for some time. But
+ * it is possible we are scheduled out for long time
+ * after a spi_read. So when we are scheduled in, a SW
+ * timeout happens. But actually HW may have worked fine and
+ * has been ready long time ago. So we need to do an extra
+ * read, if we get a valid word then we could continue rx,
+ * otherwise real a HW issue happens.
+ */
+ if (last_try)
+ return -ETIMEDOUT;
+
+ if (time_after(jiffies, poll_timeout))
+ last_try = true;
+ }
+ }
+
+ /*
+ * We have used out all transfer layer buffer but cannot find the end
+ * of the byte stream.
+ */
+ dev_err(dev, "%s transfer buffer is full but rx doesn't end\n",
+ __func__);
+
+ return -EFAULT;
+}
+
+/*
+ * For read transactions, the avmm bus will directly return register values
+ * without transaction response header.
+ */
+static int br_rd_trans_rx_parse(struct spi_avmm_bridge *br,
+ u32 *val, unsigned int expected_count)
+{
+ unsigned int i, trans_len = br->trans_len;
+ __le32 *data;
+
+ if (expected_count * SPI_AVMM_VAL_SIZE != trans_len)
+ return -EFAULT;
+
+ data = (__le32 *)br->trans_buf;
+ for (i = 0; i < expected_count; i++)
+ *val++ = le32_to_cpu(*data++);
+
+ return 0;
+}
+
+/*
+ * For write transactions, the slave will return a transaction response
+ * header.
+ */
+static int br_wr_trans_rx_parse(struct spi_avmm_bridge *br,
+ unsigned int expected_count)
+{
+ unsigned int trans_len = br->trans_len;
+ struct trans_resp_header *resp;
+ u8 code;
+ u16 val_len;
+
+ if (trans_len != TRANS_RESP_HD_SIZE)
+ return -EFAULT;
+
+ resp = (struct trans_resp_header *)br->trans_buf;
+
+ code = resp->r_code ^ 0x80;
+ val_len = be16_to_cpu(resp->size);
+ if (!val_len || val_len != expected_count * SPI_AVMM_VAL_SIZE)
+ return -EFAULT;
+
+ /* error out if the trans code doesn't align with the val size */
+ if ((val_len == SPI_AVMM_VAL_SIZE && code != TRANS_CODE_WRITE) ||
+ (val_len > SPI_AVMM_VAL_SIZE && code != TRANS_CODE_SEQ_WRITE))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int do_reg_access(void *context, bool is_read, unsigned int reg,
+ unsigned int *value, unsigned int count)
+{
+ struct spi_avmm_bridge *br = context;
+ int ret;
+
+ /* invalidate bridge buffers first */
+ br->trans_len = 0;
+ br->phy_len = 0;
+
+ ret = br_trans_tx_prepare(br, is_read, reg, value, count);
+ if (ret)
+ return ret;
+
+ ret = br_pkt_phy_tx_prepare(br);
+ if (ret)
+ return ret;
+
+ ret = br_do_tx(br);
+ if (ret)
+ return ret;
+
+ ret = br_do_rx_and_pkt_phy_parse(br);
+ if (ret)
+ return ret;
+
+ if (is_read)
+ return br_rd_trans_rx_parse(br, value, count);
+ else
+ return br_wr_trans_rx_parse(br, count);
+}
+
+static int regmap_spi_avmm_gather_write(void *context,
+ const void *reg_buf, size_t reg_len,
+ const void *val_buf, size_t val_len)
+{
+ if (reg_len != SPI_AVMM_REG_SIZE)
+ return -EINVAL;
+
+ if (!IS_ALIGNED(val_len, SPI_AVMM_VAL_SIZE))
+ return -EINVAL;
+
+ return do_reg_access(context, false, *(u32 *)reg_buf, (u32 *)val_buf,
+ val_len / SPI_AVMM_VAL_SIZE);
+}
+
+static int regmap_spi_avmm_write(void *context, const void *data, size_t bytes)
+{
+ if (bytes < SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE)
+ return -EINVAL;
+
+ return regmap_spi_avmm_gather_write(context, data, SPI_AVMM_REG_SIZE,
+ data + SPI_AVMM_REG_SIZE,
+ bytes - SPI_AVMM_REG_SIZE);
+}
+
+static int regmap_spi_avmm_read(void *context,
+ const void *reg_buf, size_t reg_len,
+ void *val_buf, size_t val_len)
+{
+ if (reg_len != SPI_AVMM_REG_SIZE)
+ return -EINVAL;
+
+ if (!IS_ALIGNED(val_len, SPI_AVMM_VAL_SIZE))
+ return -EINVAL;
+
+ return do_reg_access(context, true, *(u32 *)reg_buf, val_buf,
+ (val_len / SPI_AVMM_VAL_SIZE));
+}
+
+static struct spi_avmm_bridge *
+spi_avmm_bridge_ctx_gen(struct spi_device *spi)
+{
+ struct spi_avmm_bridge *br;
+
+ if (!spi)
+ return ERR_PTR(-ENODEV);
+
+ /* Only support BPW == 8 or 32 now. Try 32 BPW first. */
+ spi->mode = SPI_MODE_1;
+ spi->bits_per_word = 32;
+ if (spi_setup(spi)) {
+ spi->bits_per_word = 8;
+ if (spi_setup(spi))
+ return ERR_PTR(-EINVAL);
+ }
+
+ br = kzalloc(sizeof(*br), GFP_KERNEL);
+ if (!br)
+ return ERR_PTR(-ENOMEM);
+
+ br->spi = spi;
+ br->word_len = spi->bits_per_word / 8;
+ if (br->word_len == 4) {
+ /*
+ * The protocol requires little endian byte order but MSB
+ * first. So driver needs to swap the byte order word by word
+ * if word length > 1.
+ */
+ br->swap_words = br_swap_words_32;
+ }
+
+ return br;
+}
+
+static void spi_avmm_bridge_ctx_free(void *context)
+{
+ kfree(context);
+}
+
+static const struct regmap_bus regmap_spi_avmm_bus = {
+ .write = regmap_spi_avmm_write,
+ .gather_write = regmap_spi_avmm_gather_write,
+ .read = regmap_spi_avmm_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .max_raw_read = SPI_AVMM_VAL_SIZE * MAX_READ_CNT,
+ .max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT,
+ .free_context = spi_avmm_bridge_ctx_free,
+};
+
+struct regmap *__regmap_init_spi_avmm(struct spi_device *spi,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ struct spi_avmm_bridge *bridge;
+ struct regmap *map;
+
+ bridge = spi_avmm_bridge_ctx_gen(spi);
+ if (IS_ERR(bridge))
+ return ERR_CAST(bridge);
+
+ map = __regmap_init(&spi->dev, ®map_spi_avmm_bus,
+ bridge, config, lock_key, lock_name);
+ if (IS_ERR(map)) {
+ spi_avmm_bridge_ctx_free(bridge);
+ return ERR_CAST(map);
+ }
+
+ return map;
+}
+EXPORT_SYMBOL_GPL(__regmap_init_spi_avmm);
+
+struct regmap *__devm_regmap_init_spi_avmm(struct spi_device *spi,
+ const struct regmap_config *config,
+ struct lock_class_key *lock_key,
+ const char *lock_name)
+{
+ struct spi_avmm_bridge *bridge;
+ struct regmap *map;
+
+ bridge = spi_avmm_bridge_ctx_gen(spi);
+ if (IS_ERR(bridge))
+ return ERR_CAST(bridge);
+
+ map = __devm_regmap_init(&spi->dev, ®map_spi_avmm_bus,
+ bridge, config, lock_key, lock_name);
+ if (IS_ERR(map)) {
+ spi_avmm_bridge_ctx_free(bridge);
+ return ERR_CAST(map);
+ }
+
+ return map;
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_spi_avmm);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/base/regmap/regmap-w1.c b/drivers/base/regmap/regmap-w1.c
index 3a7d30b..1fbaaad 100644
--- a/drivers/base/regmap/regmap-w1.c
+++ b/drivers/base/regmap/regmap-w1.c
@@ -215,8 +215,6 @@
return __regmap_init(w1_dev, bus, w1_dev, config,
lock_key, lock_name);
-
- return NULL;
}
EXPORT_SYMBOL_GPL(__regmap_init_w1);
@@ -233,8 +231,6 @@
return __devm_regmap_init(w1_dev, bus, w1_dev, config,
lock_key, lock_name);
-
- return NULL;
}
EXPORT_SYMBOL_GPL(__devm_regmap_init_w1);
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 43c0452..55a30af 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -11,7 +11,7 @@
#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/err.h>
-#include <linux/of.h>
+#include <linux/property.h>
#include <linux/rbtree.h>
#include <linux/sched.h>
#include <linux/delay.h>
@@ -209,6 +209,18 @@
return true;
}
+static void regmap_format_12_20_write(struct regmap *map,
+ unsigned int reg, unsigned int val)
+{
+ u8 *out = map->work_buf;
+
+ out[0] = reg >> 4;
+ out[1] = (reg << 4) | (val >> 16);
+ out[2] = val >> 8;
+ out[3] = val;
+}
+
+
static void regmap_format_2_6_write(struct regmap *map,
unsigned int reg, unsigned int val)
{
@@ -581,14 +593,35 @@
kfree(map->selector_work_buf);
}
+static int regmap_set_name(struct regmap *map, const struct regmap_config *config)
+{
+ if (config->name) {
+ const char *name = kstrdup_const(config->name, GFP_KERNEL);
+
+ if (!name)
+ return -ENOMEM;
+
+ kfree_const(map->name);
+ map->name = name;
+ }
+
+ return 0;
+}
+
int regmap_attach_dev(struct device *dev, struct regmap *map,
const struct regmap_config *config)
{
struct regmap **m;
+ int ret;
map->dev = dev;
- regmap_debugfs_init(map, config->name);
+ ret = regmap_set_name(map, config);
+ if (ret)
+ return ret;
+
+ regmap_debugfs_exit(map);
+ regmap_debugfs_init(map);
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
@@ -631,7 +664,7 @@
const struct regmap_bus *bus,
const struct regmap_config *config)
{
- struct device_node *np;
+ struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL;
enum regmap_endian endian;
/* Retrieve the endianness specification from the regmap config */
@@ -641,22 +674,17 @@
if (endian != REGMAP_ENDIAN_DEFAULT)
return endian;
- /* If the dev and dev->of_node exist try to get endianness from DT */
- if (dev && dev->of_node) {
- np = dev->of_node;
+ /* If the firmware node exist try to get endianness from it */
+ if (fwnode_property_read_bool(fwnode, "big-endian"))
+ endian = REGMAP_ENDIAN_BIG;
+ else if (fwnode_property_read_bool(fwnode, "little-endian"))
+ endian = REGMAP_ENDIAN_LITTLE;
+ else if (fwnode_property_read_bool(fwnode, "native-endian"))
+ endian = REGMAP_ENDIAN_NATIVE;
- /* Parse the device's DT node for an endianness specification */
- if (of_property_read_bool(np, "big-endian"))
- endian = REGMAP_ENDIAN_BIG;
- else if (of_property_read_bool(np, "little-endian"))
- endian = REGMAP_ENDIAN_LITTLE;
- else if (of_property_read_bool(np, "native-endian"))
- endian = REGMAP_ENDIAN_NATIVE;
-
- /* If the endianness was specified in DT, use that */
- if (endian != REGMAP_ENDIAN_DEFAULT)
- return endian;
- }
+ /* If the endianness was specified in fwnode, use that */
+ if (endian != REGMAP_ENDIAN_DEFAULT)
+ return endian;
/* Retrieve the endianness specification from the bus config */
if (bus && bus->val_format_endian_default)
@@ -692,21 +720,21 @@
goto err;
}
- if (config->name) {
- map->name = kstrdup_const(config->name, GFP_KERNEL);
- if (!map->name) {
- ret = -ENOMEM;
- goto err_map;
- }
- }
+ ret = regmap_set_name(map, config);
+ if (ret)
+ goto err_map;
+
+ ret = -EINVAL; /* Later error paths rely on this */
if (config->disable_locking) {
map->lock = map->unlock = regmap_lock_unlock_none;
+ map->can_sleep = config->can_sleep;
regmap_debugfs_disable(map);
} else if (config->lock && config->unlock) {
map->lock = config->lock;
map->unlock = config->unlock;
map->lock_arg = config->lock_arg;
+ map->can_sleep = config->can_sleep;
} else if (config->use_hwlock) {
map->hwlock = hwspin_lock_request_specific(config->hwlock_id);
if (!map->hwlock) {
@@ -742,6 +770,7 @@
mutex_init(&map->mutex);
map->lock = regmap_lock_mutex;
map->unlock = regmap_unlock_mutex;
+ map->can_sleep = true;
lockdep_set_class_and_name(&map->mutex,
lock_key, lock_name);
}
@@ -819,6 +848,7 @@
} else if (!bus->read || !bus->write) {
map->reg_read = _regmap_bus_reg_read;
map->reg_write = _regmap_bus_reg_write;
+ map->reg_update_bits = bus->reg_update_bits;
map->defer_caching = false;
goto skip_format_initialization;
@@ -871,6 +901,16 @@
}
break;
+ case 12:
+ switch (config->val_bits) {
+ case 20:
+ map->format.format_write = regmap_format_12_20_write;
+ break;
+ default:
+ goto err_hwlock;
+ }
+ break;
+
case 8:
map->format.format_reg = regmap_format_8;
break;
@@ -1141,7 +1181,7 @@
if (ret != 0)
goto err_regcache;
} else {
- regmap_debugfs_init(map, config->name);
+ regmap_debugfs_init(map);
}
return map;
@@ -1231,6 +1271,106 @@
}
EXPORT_SYMBOL_GPL(devm_regmap_field_alloc);
+
+/**
+ * regmap_field_bulk_alloc() - Allocate and initialise a bulk register field.
+ *
+ * @regmap: regmap bank in which this register field is located.
+ * @rm_field: regmap register fields within the bank.
+ * @reg_field: Register fields within the bank.
+ * @num_fields: Number of register fields.
+ *
+ * The return value will be an -ENOMEM on error or zero for success.
+ * Newly allocated regmap_fields should be freed by calling
+ * regmap_field_bulk_free()
+ */
+int regmap_field_bulk_alloc(struct regmap *regmap,
+ struct regmap_field **rm_field,
+ struct reg_field *reg_field,
+ int num_fields)
+{
+ struct regmap_field *rf;
+ int i;
+
+ rf = kcalloc(num_fields, sizeof(*rf), GFP_KERNEL);
+ if (!rf)
+ return -ENOMEM;
+
+ for (i = 0; i < num_fields; i++) {
+ regmap_field_init(&rf[i], regmap, reg_field[i]);
+ rm_field[i] = &rf[i];
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regmap_field_bulk_alloc);
+
+/**
+ * devm_regmap_field_bulk_alloc() - Allocate and initialise a bulk register
+ * fields.
+ *
+ * @dev: Device that will be interacted with
+ * @regmap: regmap bank in which this register field is located.
+ * @rm_field: regmap register fields within the bank.
+ * @reg_field: Register fields within the bank.
+ * @num_fields: Number of register fields.
+ *
+ * The return value will be an -ENOMEM on error or zero for success.
+ * Newly allocated regmap_fields will be automatically freed by the
+ * device management code.
+ */
+int devm_regmap_field_bulk_alloc(struct device *dev,
+ struct regmap *regmap,
+ struct regmap_field **rm_field,
+ struct reg_field *reg_field,
+ int num_fields)
+{
+ struct regmap_field *rf;
+ int i;
+
+ rf = devm_kcalloc(dev, num_fields, sizeof(*rf), GFP_KERNEL);
+ if (!rf)
+ return -ENOMEM;
+
+ for (i = 0; i < num_fields; i++) {
+ regmap_field_init(&rf[i], regmap, reg_field[i]);
+ rm_field[i] = &rf[i];
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_regmap_field_bulk_alloc);
+
+/**
+ * regmap_field_bulk_free() - Free register field allocated using
+ * regmap_field_bulk_alloc.
+ *
+ * @field: regmap fields which should be freed.
+ */
+void regmap_field_bulk_free(struct regmap_field *field)
+{
+ kfree(field);
+}
+EXPORT_SYMBOL_GPL(regmap_field_bulk_free);
+
+/**
+ * devm_regmap_field_bulk_free() - Free a bulk register field allocated using
+ * devm_regmap_field_bulk_alloc.
+ *
+ * @dev: Device that will be interacted with
+ * @field: regmap field which should be freed.
+ *
+ * Free register field allocated using devm_regmap_field_bulk_alloc(). Usually
+ * drivers need not call this function, as the memory allocated via devm
+ * will be freed as per device-driver life-cycle.
+ */
+void devm_regmap_field_bulk_free(struct device *dev,
+ struct regmap_field *field)
+{
+ devm_kfree(dev, field);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_field_bulk_free);
+
/**
* devm_regmap_field_free() - Free a register field allocated using
* devm_regmap_field_alloc.
@@ -1301,6 +1441,8 @@
*/
int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config)
{
+ int ret;
+
regcache_exit(map);
regmap_debugfs_exit(map);
@@ -1313,7 +1455,11 @@
map->readable_noinc_reg = config->readable_noinc_reg;
map->cache_type = config->cache_type;
- regmap_debugfs_init(map, config->name);
+ ret = regmap_set_name(map, config);
+ if (ret)
+ return ret;
+
+ regmap_debugfs_init(map);
map->cache_bypass = false;
map->cache_only = false;
@@ -1347,6 +1493,8 @@
}
if (map->hwlock)
hwspin_lock_free(map->hwlock);
+ if (map->lock == regmap_lock_mutex)
+ mutex_destroy(&map->mutex);
kfree_const(map->name);
kfree(map->patch);
kfree(map);
@@ -2024,7 +2172,7 @@
* A value of zero will be returned on success, a negative errno will
* be returned in error cases.
*/
-int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id,
+int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id,
unsigned int mask, unsigned int val,
bool *change, bool async, bool force)
{
@@ -2235,8 +2383,12 @@
if (ret != 0)
return ret;
- if (regs[i].delay_us)
- udelay(regs[i].delay_us);
+ if (regs[i].delay_us) {
+ if (map->can_sleep)
+ fsleep(regs[i].delay_us);
+ else
+ udelay(regs[i].delay_us);
+ }
base += n;
n = 0;
@@ -2272,8 +2424,12 @@
if (ret != 0)
return ret;
- if (regs[i].delay_us)
- udelay(regs[i].delay_us);
+ if (regs[i].delay_us) {
+ if (map->can_sleep)
+ fsleep(regs[i].delay_us);
+ else
+ udelay(regs[i].delay_us);
+ }
}
return 0;
}
@@ -2930,6 +3086,29 @@
}
EXPORT_SYMBOL_GPL(regmap_update_bits_base);
+/**
+ * regmap_test_bits() - Check if all specified bits are set in a register.
+ *
+ * @map: Register map to operate on
+ * @reg: Register to read from
+ * @bits: Bits to test
+ *
+ * Returns 0 if at least one of the tested bits is not set, 1 if all tested
+ * bits are set and a negative error number if the underlying regmap_read()
+ * fails.
+ */
+int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits)
+{
+ unsigned int val, ret;
+
+ ret = regmap_read(map, reg, &val);
+ if (ret)
+ return ret;
+
+ return (val & bits) == bits;
+}
+EXPORT_SYMBOL_GPL(regmap_test_bits);
+
void regmap_async_complete_cb(struct regmap_async *async, int ret)
{
struct regmap *map = async->map;