Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 8fbd376..1573319 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -305,19 +305,40 @@
return 0;
}
+/**
+ * pm_runtime_release_supplier - Drop references to device link's supplier.
+ * @link: Target device link.
+ * @check_idle: Whether or not to check if the supplier device is idle.
+ *
+ * Drop all runtime PM references associated with @link to its supplier device
+ * and if @check_idle is set, check if that device is idle (and so it can be
+ * suspended).
+ */
+void pm_runtime_release_supplier(struct device_link *link, bool check_idle)
+{
+ struct device *supplier = link->supplier;
+
+ /*
+ * The additional power.usage_count check is a safety net in case
+ * the rpm_active refcount becomes saturated, in which case
+ * refcount_dec_not_one() would return true forever, but it is not
+ * strictly necessary.
+ */
+ while (refcount_dec_not_one(&link->rpm_active) &&
+ atomic_read(&supplier->power.usage_count) > 0)
+ pm_runtime_put_noidle(supplier);
+
+ if (check_idle)
+ pm_request_idle(supplier);
+}
+
static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend)
{
struct device_link *link;
list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
- device_links_read_lock_held()) {
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put_noidle(link->supplier);
-
- if (try_to_suspend)
- pm_request_idle(link->supplier);
- }
+ device_links_read_lock_held())
+ pm_runtime_release_supplier(link, try_to_suspend);
}
static void rpm_put_suppliers(struct device *dev)
@@ -542,13 +563,11 @@
repeat:
retval = rpm_check_suspend_allowed(dev);
-
if (retval < 0)
- ; /* Conditions are wrong. */
+ goto out; /* Conditions are wrong. */
/* Synchronous suspends are not allowed in the RPM_RESUMING state. */
- else if (dev->power.runtime_status == RPM_RESUMING &&
- !(rpmflags & RPM_ASYNC))
+ if (dev->power.runtime_status == RPM_RESUMING && !(rpmflags & RPM_ASYNC))
retval = -EAGAIN;
if (retval)
goto out;
@@ -1036,8 +1055,10 @@
int retval;
if (rpmflags & RPM_GET_PUT) {
- if (!atomic_dec_and_test(&dev->power.usage_count))
+ if (!atomic_dec_and_test(&dev->power.usage_count)) {
+ trace_rpm_usage_rcuidle(dev, rpmflags);
return 0;
+ }
}
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
@@ -1068,8 +1089,10 @@
int retval;
if (rpmflags & RPM_GET_PUT) {
- if (!atomic_dec_and_test(&dev->power.usage_count))
+ if (!atomic_dec_and_test(&dev->power.usage_count)) {
+ trace_rpm_usage_rcuidle(dev, rpmflags);
return 0;
+ }
}
might_sleep_if(!(rpmflags & RPM_ASYNC) && !dev->power.irq_safe);
@@ -1113,28 +1136,49 @@
EXPORT_SYMBOL_GPL(__pm_runtime_resume);
/**
- * pm_runtime_get_if_in_use - Conditionally bump up the device's usage counter.
+ * pm_runtime_get_if_active - Conditionally bump up device usage counter.
* @dev: Device to handle.
+ * @ign_usage_count: Whether or not to look at the current usage counter value.
*
- * Return -EINVAL if runtime PM is disabled for the device.
+ * Return -EINVAL if runtime PM is disabled for @dev.
*
- * If that's not the case and if the device's runtime PM status is RPM_ACTIVE
- * and the runtime PM usage counter is nonzero, increment the counter and
- * return 1. Otherwise return 0 without changing the counter.
+ * Otherwise, if the runtime PM status of @dev is %RPM_ACTIVE and either
+ * @ign_usage_count is %true or the runtime PM usage counter of @dev is not
+ * zero, increment the usage counter of @dev and return 1. Otherwise, return 0
+ * without changing the usage counter.
+ *
+ * If @ign_usage_count is %true, this function can be used to prevent suspending
+ * the device when its runtime PM status is %RPM_ACTIVE.
+ *
+ * If @ign_usage_count is %false, this function can be used to prevent
+ * suspending the device when both its runtime PM status is %RPM_ACTIVE and its
+ * runtime PM usage counter is not zero.
+ *
+ * The caller is resposible for decrementing the runtime PM usage counter of
+ * @dev after this function has returned a positive value for it.
*/
-int pm_runtime_get_if_in_use(struct device *dev)
+int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count)
{
unsigned long flags;
int retval;
spin_lock_irqsave(&dev->power.lock, flags);
- retval = dev->power.disable_depth > 0 ? -EINVAL :
- dev->power.runtime_status == RPM_ACTIVE
- && atomic_inc_not_zero(&dev->power.usage_count);
+ if (dev->power.disable_depth > 0) {
+ retval = -EINVAL;
+ } else if (dev->power.runtime_status != RPM_ACTIVE) {
+ retval = 0;
+ } else if (ign_usage_count) {
+ retval = 1;
+ atomic_inc(&dev->power.usage_count);
+ } else {
+ retval = atomic_inc_not_zero(&dev->power.usage_count);
+ }
+ trace_rpm_usage_rcuidle(dev, 0);
spin_unlock_irqrestore(&dev->power.lock, flags);
+
return retval;
}
-EXPORT_SYMBOL_GPL(pm_runtime_get_if_in_use);
+EXPORT_SYMBOL_GPL(pm_runtime_get_if_active);
/**
* __pm_runtime_set_status - Set runtime PM status of a device.
@@ -1464,6 +1508,8 @@
dev->power.runtime_auto = true;
if (atomic_dec_and_test(&dev->power.usage_count))
rpm_idle(dev, RPM_AUTO | RPM_ASYNC);
+ else
+ trace_rpm_usage_rcuidle(dev, RPM_AUTO | RPM_ASYNC);
out:
spin_unlock_irq(&dev->power.lock);
@@ -1531,6 +1577,8 @@
if (!old_use || old_delay >= 0) {
atomic_inc(&dev->power.usage_count);
rpm_resume(dev, 0);
+ } else {
+ trace_rpm_usage_rcuidle(dev, 0);
}
}
@@ -1728,9 +1776,7 @@
return;
pm_runtime_drop_link_count(link->consumer);
-
- while (refcount_dec_not_one(&link->rpm_active))
- pm_runtime_put(link->supplier);
+ pm_runtime_release_supplier(link, true);
}
static bool pm_runtime_need_not_resume(struct device *dev)