Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 753f3df..acea05e 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -15,9 +15,11 @@
#include <asm/cpu.h>
#include <asm/spec-ctrl.h>
#include <asm/smp.h>
+#include <asm/numa.h>
#include <asm/pci-direct.h>
#include <asm/delay.h>
#include <asm/debugreg.h>
+#include <asm/resctrl.h>
#ifdef CONFIG_X86_64
# include <asm/mmconfig.h>
@@ -320,13 +322,6 @@
c->cpu_core_id %= cus_per_node;
}
-
-static void amd_get_topology_early(struct cpuinfo_x86 *c)
-{
- if (cpu_has(c, X86_FEATURE_TOPOEXT))
- smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
-}
-
/*
* Fixup core topology information for
* (1) AMD multi-node processors
@@ -400,6 +395,35 @@
per_cpu(cpu_llc_id, cpu) = c->cpu_die_id = c->phys_proc_id;
}
+static void amd_detect_ppin(struct cpuinfo_x86 *c)
+{
+ unsigned long long val;
+
+ if (!cpu_has(c, X86_FEATURE_AMD_PPIN))
+ return;
+
+ /* When PPIN is defined in CPUID, still need to check PPIN_CTL MSR */
+ if (rdmsrl_safe(MSR_AMD_PPIN_CTL, &val))
+ goto clear_ppin;
+
+ /* PPIN is locked in disabled mode, clear feature bit */
+ if ((val & 3UL) == 1UL)
+ goto clear_ppin;
+
+ /* If PPIN is disabled, try to enable it */
+ if (!(val & 2UL)) {
+ wrmsrl_safe(MSR_AMD_PPIN_CTL, val | 2UL);
+ rdmsrl_safe(MSR_AMD_PPIN_CTL, &val);
+ }
+
+ /* If PPIN_EN bit is 1, return from here; otherwise fall through */
+ if (val & 2UL)
+ return;
+
+clear_ppin:
+ clear_cpu_cap(c, X86_FEATURE_AMD_PPIN);
+}
+
u16 amd_get_nb_id(int cpu)
{
return per_cpu(cpu_llc_id, cpu);
@@ -574,6 +598,8 @@
x86_amd_ls_cfg_ssbd_mask = 1ULL << bit;
}
}
+
+ resctrl_cpu_detect(c);
}
static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
@@ -587,7 +613,7 @@
* If BIOS has not enabled SME then don't advertise the
* SME feature (set in scattered.c).
* For SEV: If BIOS has not enabled SEV then don't advertise the
- * SEV feature (set in scattered.c).
+ * SEV and SEV_ES feature (set in scattered.c).
*
* In all cases, since support for SME and SEV requires long mode,
* don't advertise the feature under CONFIG_X86_32.
@@ -618,6 +644,7 @@
setup_clear_cpu_cap(X86_FEATURE_SME);
clear_sev:
setup_clear_cpu_cap(X86_FEATURE_SEV);
+ setup_clear_cpu_cap(X86_FEATURE_SEV_ES);
}
}
@@ -717,7 +744,8 @@
}
}
- amd_get_topology_early(c);
+ if (cpu_has(c, X86_FEATURE_TOPOEXT))
+ smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
}
static void init_amd_k8(struct cpuinfo_x86 *c)
@@ -931,7 +959,8 @@
case 0x12: init_amd_ln(c); break;
case 0x15: init_amd_bd(c); break;
case 0x16: init_amd_jg(c); break;
- case 0x17: init_amd_zn(c); break;
+ case 0x17: fallthrough;
+ case 0x19: init_amd_zn(c); break;
}
/*
@@ -946,6 +975,7 @@
amd_detect_cmp(c);
amd_get_topology(c);
srat_detect_node(c);
+ amd_detect_ppin(c);
init_amd_cacheinfo(c);
@@ -987,6 +1017,8 @@
if (cpu_has(c, X86_FEATURE_IRPERF) &&
!cpu_has_amd_erratum(c, amd_erratum_1054))
msr_set_bit(MSR_K7_HWCR, MSR_K7_HWCR_IRPERF_EN_BIT);
+
+ check_null_seg_clears_base(c);
}
#ifdef CONFIG_X86_32