Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index cee24c3..83bcb6d 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -7,6 +7,11 @@
config SH_ALPHA_BOARD
bool
+config SH_CUSTOM_CLK
+ def_bool y
+ depends on !SH_DEVICE_TREE
+ select HAVE_LEGACY_CLK
+
config SH_DEVICE_TREE
bool
select OF
@@ -335,12 +340,6 @@
help
Select Magic Panel R2 if configuring for Magic Panel R2.
-config SH_CAYMAN
- bool "Hitachi Cayman"
- depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select HAVE_PCI
- select ARCH_MIGHT_HAVE_PC_SERIO
-
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
index ef9c87d..6ea85e4 100644
--- a/arch/sh/boards/board-sh2007.c
+++ b/arch/sh/boards/board-sh2007.c
@@ -126,14 +126,14 @@
*/
static void __init sh2007_setup(char **cmdline_p)
{
- printk(KERN_INFO "SH-2007 Setup...");
+ pr_info("SH-2007 Setup...");
/* setup wait control registers for area 5 */
__raw_writel(CS5BCR_D, CS5BCR);
__raw_writel(CS5WCR_D, CS5WCR);
__raw_writel(CS5PCR_D, CS5PCR);
- printk(KERN_INFO " done.\n");
+ pr_cont(" done.\n");
}
/*
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index d964c4d..77dad1e 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -341,7 +341,7 @@
pm_power_off = sh7785lcr_power_off;
/* sm501 DRAM configuration */
- sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+ sm501_reg = ioremap(SM107_REG_ADDR, SM501_DRAM_CONTROL);
if (!sm501_reg) {
printk(KERN_ERR "%s: ioremap error.\n", __func__);
return;
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 665cad4..bac8a05 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -13,6 +13,7 @@
#include <cpu/sh7723.h>
+#include <linux/dma-map-ops.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
deleted file mode 100644
index 775a4be..0000000
--- a/arch/sh/boards/mach-cayman/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the Hitachi Cayman specific parts of the kernel
-#
-obj-y := setup.o irq.o panic.o
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
deleted file mode 100644
index 9108789..0000000
--- a/arch/sh/boards/mach-cayman/irq.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
- *
- * This file handles the board specific parts of the Cayman interrupt system
- *
- * Copyright (C) 2002 Stuart Menefy
- */
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <cpu/irq.h>
-#include <asm/page.h>
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ IRQ_IRL3
-
-unsigned long epld_virt;
-
-#define EPLD_BASE 0x04002000
-#define EPLD_STATUS_BASE (epld_virt + 0x10)
-#define EPLD_MASK_BASE (epld_virt + 0x20)
-
-/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
- the same SH-5 interrupt */
-
-static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
-{
- printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
- return IRQ_NONE;
-}
-
-static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
-{
- printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
- return IRQ_NONE;
-}
-
-static struct irqaction cayman_action_smsc = {
- .name = "Cayman SMSC Mux",
- .handler = cayman_interrupt_smsc,
-};
-
-static struct irqaction cayman_action_pci2 = {
- .name = "Cayman PCI2 Mux",
- .handler = cayman_interrupt_pci2,
-};
-
-static void enable_cayman_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long flags;
- unsigned long mask;
- unsigned int reg;
- unsigned char bit;
-
- irq -= START_EXT_IRQS;
- reg = EPLD_MASK_BASE + ((irq / 8) << 2);
- bit = 1<<(irq % 8);
- local_irq_save(flags);
- mask = __raw_readl(reg);
- mask |= bit;
- __raw_writel(mask, reg);
- local_irq_restore(flags);
-}
-
-static void disable_cayman_irq(struct irq_data *data)
-{
- unsigned int irq = data->irq;
- unsigned long flags;
- unsigned long mask;
- unsigned int reg;
- unsigned char bit;
-
- irq -= START_EXT_IRQS;
- reg = EPLD_MASK_BASE + ((irq / 8) << 2);
- bit = 1<<(irq % 8);
- local_irq_save(flags);
- mask = __raw_readl(reg);
- mask &= ~bit;
- __raw_writel(mask, reg);
- local_irq_restore(flags);
-}
-
-struct irq_chip cayman_irq_type = {
- .name = "Cayman-IRQ",
- .irq_unmask = enable_cayman_irq,
- .irq_mask = disable_cayman_irq,
-};
-
-int cayman_irq_demux(int evt)
-{
- int irq = intc_evt_to_irq[evt];
-
- if (irq == SMSC_IRQ) {
- unsigned long status;
- int i;
-
- status = __raw_readl(EPLD_STATUS_BASE) &
- __raw_readl(EPLD_MASK_BASE) & 0xff;
- if (status == 0) {
- irq = -1;
- } else {
- for (i=0; i<8; i++) {
- if (status & (1<<i))
- break;
- }
- irq = START_EXT_IRQS + i;
- }
- }
-
- if (irq == PCI2_IRQ) {
- unsigned long status;
- int i;
-
- status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
- __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
- if (status == 0) {
- irq = -1;
- } else {
- for (i=0; i<8; i++) {
- if (status & (1<<i))
- break;
- }
- irq = START_EXT_IRQS + (3 * 8) + i;
- }
- }
-
- return irq;
-}
-
-void init_cayman_irq(void)
-{
- int i;
-
- epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
- if (!epld_virt) {
- printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
- return;
- }
-
- for (i = 0; i < NR_EXT_IRQS; i++) {
- irq_set_chip_and_handler(START_EXT_IRQS + i,
- &cayman_irq_type, handle_level_irq);
- }
-
- /* Setup the SMSC interrupt */
- setup_irq(SMSC_IRQ, &cayman_action_smsc);
- setup_irq(PCI2_IRQ, &cayman_action_pci2);
-}
diff --git a/arch/sh/boards/mach-cayman/panic.c b/arch/sh/boards/mach-cayman/panic.c
deleted file mode 100644
index cfc4631..0000000
--- a/arch/sh/boards/mach-cayman/panic.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2003 Richard Curnow, SuperH UK Limited
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <cpu/registers.h>
-
-/* THIS IS A PHYSICAL ADDRESS */
-#define HDSP2534_ADDR (0x04002100)
-
-static void poor_mans_delay(void)
-{
- int i;
-
- for (i = 0; i < 2500000; i++)
- cpu_relax();
-}
-
-static void show_value(unsigned long x)
-{
- int i;
- unsigned nibble;
- for (i = 0; i < 8; i++) {
- nibble = ((x >> (i * 4)) & 0xf);
-
- __raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
- HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
- }
-}
-
-void
-panic_handler(unsigned long panicPC, unsigned long panicSSR,
- unsigned long panicEXPEVT)
-{
- while (1) {
- /* This piece of code displays the PC on the LED display */
- show_value(panicPC);
- poor_mans_delay();
- show_value(panicSSR);
- poor_mans_delay();
- show_value(panicEXPEVT);
- poor_mans_delay();
- }
-}
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
deleted file mode 100644
index 4cec147..0000000
--- a/arch/sh/boards/mach-cayman/setup.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/sh/mach-cayman/setup.c
- *
- * SH5 Cayman support
- *
- * Copyright (C) 2002 David J. Mckay & Benedict Gaster
- * Copyright (C) 2003 - 2007 Paul Mundt
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <cpu/irq.h>
-
-/*
- * Platform Dependent Interrupt Priorities.
- */
-
-/* Using defaults defined in irq.h */
-#define RES NO_PRIORITY /* Disabled */
-#define IR0 IRL0_PRIORITY /* IRLs */
-#define IR1 IRL1_PRIORITY
-#define IR2 IRL2_PRIORITY
-#define IR3 IRL3_PRIORITY
-#define PCA INTA_PRIORITY /* PCI Ints */
-#define PCB INTB_PRIORITY
-#define PCC INTC_PRIORITY
-#define PCD INTD_PRIORITY
-#define SER TOP_PRIORITY
-#define ERR TOP_PRIORITY
-#define PW0 TOP_PRIORITY
-#define PW1 TOP_PRIORITY
-#define PW2 TOP_PRIORITY
-#define PW3 TOP_PRIORITY
-#define DM0 NO_PRIORITY /* DMA Ints */
-#define DM1 NO_PRIORITY
-#define DM2 NO_PRIORITY
-#define DM3 NO_PRIORITY
-#define DAE NO_PRIORITY
-#define TU0 TIMER_PRIORITY /* TMU Ints */
-#define TU1 NO_PRIORITY
-#define TU2 NO_PRIORITY
-#define TI2 NO_PRIORITY
-#define ATI NO_PRIORITY /* RTC Ints */
-#define PRI NO_PRIORITY
-#define CUI RTC_PRIORITY
-#define ERI SCIF_PRIORITY /* SCIF Ints */
-#define RXI SCIF_PRIORITY
-#define BRI SCIF_PRIORITY
-#define TXI SCIF_PRIORITY
-#define ITI TOP_PRIORITY /* WDT Ints */
-
-/* Setup for the SMSC FDC37C935 */
-#define SMSC_SUPERIO_BASE 0x04000000
-#define SMSC_CONFIG_PORT_ADDR 0x3f0
-#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR 0x3f1
-
-#define SMSC_ENTER_CONFIG_KEY 0x55
-#define SMSC_EXIT_CONFIG_KEY 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 0x07
-#define SMSC_DEVICE_ID_INDEX 0x20
-#define SMSC_DEVICE_REV_INDEX 0x21
-#define SMSC_ACTIVATE_INDEX 0x30
-#define SMSC_PRIMARY_BASE_INDEX 0x60
-#define SMSC_SECONDARY_BASE_INDEX 0x62
-#define SMSC_PRIMARY_INT_INDEX 0x70
-#define SMSC_SECONDARY_INT_INDEX 0x72
-
-#define SMSC_IDE1_DEVICE 1
-#define SMSC_KEYBOARD_DEVICE 7
-#define SMSC_CONFIG_REGISTERS 8
-
-#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- outb((val), SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE 0x01f0
-#define IDE1_SECONDARY_BASE 0x03f6
-
-unsigned long smsc_superio_virt;
-
-int platform_int_priority[NR_INTC_IRQS] = {
- IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
- RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
- PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
- RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
- TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
- RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
- RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
- RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
-};
-
-static int __init smsc_superio_setup(void)
-{
- unsigned char devid, devrev;
-
- smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
- if (!smsc_superio_virt) {
- panic("Unable to remap SMSC SuperIO\n");
- }
-
- /* Initially the chip is in run state */
- /* Put it into configuration state */
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- /* Read device ID info */
- devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
- devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
- printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
-
- /* Select the keyboard device */
- SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-
- /* enable it */
- SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
- /* Select the interrupts */
- /* On a PC keyboard is IRQ1, mouse is IRQ12 */
- SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
- SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
-
- /*
- * Only IDE1 exists on the Cayman
- */
-
- /* Power it on */
- SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
-
- SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
- SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
- SMSC_PRIMARY_BASE_INDEX + 0);
- SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
- SMSC_PRIMARY_BASE_INDEX + 1);
-
- SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
- SMSC_SECONDARY_BASE_INDEX + 0);
- SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
- SMSC_SECONDARY_BASE_INDEX + 1);
-
- SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
-
- SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
- SMCS_LOGICAL_DEV_INDEX);
-
- SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
- SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
- SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
- SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-
- /* Exit the configuration state */
- outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- return 0;
-}
-device_initcall(smsc_superio_setup);
-
-static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
-{
- if (port < 0x400) {
- extern unsigned long smsc_superio_virt;
- return (void __iomem *)((port << 2) | smsc_superio_virt);
- }
-
- return (void __iomem *)port;
-}
-
-extern void init_cayman_irq(void);
-
-static struct sh_machine_vector mv_cayman __initmv = {
- .mv_name = "Hitachi Cayman",
- .mv_ioport_map = cayman_ioport_map,
- .mv_init_irq = init_cayman_irq,
-};
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index acaa974..bab91a9 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -36,6 +36,7 @@
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/videodev2.h>
+#include <linux/dma-map-ops.h>
#include <media/drv-intf/renesas-ceu.h>
#include <media/i2c/mt9t112.h>
@@ -371,20 +372,32 @@
},
};
-static struct gpio_backlight_platform_data gpio_backlight_data = {
- .fbdev = &lcdc_device.dev,
- .gpio = GPIO_PTR1,
- .def_value = 1,
- .name = "backlight",
-};
-
-static struct platform_device gpio_backlight_device = {
- .name = "gpio-backlight",
- .dev = {
- .platform_data = &gpio_backlight_data,
+static struct gpiod_lookup_table gpio_backlight_lookup = {
+ .dev_id = "gpio-backlight.0",
+ .table = {
+ GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
+ { }
},
};
+static struct property_entry gpio_backlight_props[] = {
+ PROPERTY_ENTRY_BOOL("default-on"),
+ { }
+};
+
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+ .fbdev = &lcdc_device.dev,
+};
+
+static const struct platform_device_info gpio_backlight_device_info = {
+ .name = "gpio-backlight",
+ .data = &gpio_backlight_data,
+ .size_data = sizeof(gpio_backlight_data),
+ .properties = gpio_backlight_props,
+};
+
+static struct platform_device *gpio_backlight_device;
+
/* CEU0 */
static struct ceu_platform_data ceu0_pdata = {
.num_subdevs = 2,
@@ -1006,7 +1019,6 @@
&usb1_common_device,
&usbhs_device,
&lcdc_device,
- &gpio_backlight_device,
&keysc_device,
&cn12_power,
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1462,6 +1474,12 @@
#endif
#endif
+ gpiod_add_lookup_table(&gpio_backlight_lookup);
+ gpio_backlight_device = platform_device_register_full(
+ &gpio_backlight_device_info);
+ if (IS_ERR(gpio_backlight_device))
+ return PTR_ERR(gpio_backlight_device);
+
return platform_add_devices(ecovec_devices,
ARRAY_SIZE(ecovec_devices));
}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 96538ba..eeb5ce3 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -14,7 +14,6 @@
#include <linux/clkdev.h>
#include <linux/delay.h>
-#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/i2c.h>
@@ -33,6 +32,7 @@
#include <linux/sh_intc.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
+#include <linux/dma-map-ops.h>
#include <mach/kfr2r09.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 9ed369d..6703a21 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -5,7 +5,7 @@
* Copyright (C) 2008 Magnus Damm
*/
#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c
index 895576f..a37e1e8 100644
--- a/arch/sh/boards/mach-sdk7786/fpga.c
+++ b/arch/sh/boards/mach-sdk7786/fpga.c
@@ -32,7 +32,7 @@
* is reserved.
*/
for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
- base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
+ base = ioremap(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
if (!base) {
/* Failed to remap this area, move along. */
continue;
diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c
index c2e09d7..afba496 100644
--- a/arch/sh/boards/mach-sdk7786/nmi.c
+++ b/arch/sh/boards/mach-sdk7786/nmi.c
@@ -37,7 +37,7 @@
nmi_mode = NMI_MODE_ANY;
else {
nmi_mode = NMI_MODE_UNKNOWN;
- pr_warning("Unknown NMI mode %s\n", str);
+ pr_warn("Unknown NMI mode %s\n", str);
}
printk("Set NMI mode to %d\n", nmi_mode);
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 32f5dd9..8d6541b 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -32,6 +32,7 @@
#include <linux/smc91x.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
+#include <linux/dma-map-ops.h>
#include <mach-se/mach/se7724.h>
#include <media/drv-intf/renesas-ceu.h>
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index d91065e..bffbe69 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -49,7 +49,7 @@
extern const struct of_cpu_method __cpu_method_of_table[];
const struct of_cpu_method __cpu_method_of_table_sentinel
- __section(__cpu_method_of_table_end);
+ __section("__cpu_method_of_table_end");
static void sh_of_smp_probe(void)
{