Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 603b3c6..026b3f0 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -24,7 +24,6 @@
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
-obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
@@ -32,8 +31,6 @@
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_IPIC) += ipic.o
-obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
-obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
obj-$(CONFIG_CPM) += cpm_common.o
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 07718b9..68538b8 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -39,7 +39,6 @@
#include <asm/irq.h>
#include <asm/mpc8260.h>
#include <asm/page.h>
-#include <asm/pgtable.h>
#include <asm/cpm2.h>
#include <asm/rheap.h>
#include <asm/fs_pd.h>
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 71660ba..7dc1960 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -68,6 +68,8 @@
void __init udbg_init_cpm(void)
{
#ifdef CONFIG_PPC_8xx
+ mmu_mapin_immr();
+
cpm_udbg_txdesc = (u32 __iomem __force *)
(CONFIG_PPC_EARLY_DEBUG_CPM_ADDR - PHYS_IMMR_BASE +
VIRT_IMMR_BASE);
diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S
index efeeb1b..329b9c4 100644
--- a/arch/powerpc/sysdev/dcr-low.S
+++ b/arch/powerpc/sysdev/dcr-low.S
@@ -11,7 +11,7 @@
#include <asm/export.h>
#define DCR_ACCESS_PROLOG(table) \
- cmpli cr0,r3,1024; \
+ cmplwi cr0,r3,1024; \
rlwinm r3,r3,4,18,27; \
lis r5,table@h; \
ori r5,r5,table@l; \
diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
index f6c665d..a3aeaa5 100644
--- a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
+++ b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c
@@ -15,7 +15,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of_platform.h>
-#include <asm/pgtable.h>
+#include <linux/pgtable.h>
#include <asm/fsl_85xx_cache_sram.h>
#include "fsl_85xx_cache_ctlr.h"
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ff0e2b1..040b9d0 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -115,8 +115,8 @@
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
- pdev->dev.bus_dma_mask =
- hose->dma_window_base_cur + hose->dma_window_size;
+ pdev->dev.bus_dma_limit =
+ hose->dma_window_base_cur + hose->dma_window_size - 1;
}
static void setup_swiotlb_ops(struct pci_controller *hose)
@@ -135,7 +135,7 @@
* mapping that allows addressing any RAM address from across PCI.
*/
if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
- dev->bus_dma_mask = 0;
+ dev->bus_dma_limit = 0;
dev->archdata.dma_offset = pci64_dma_offset;
}
}
@@ -1065,13 +1065,11 @@
addr += mfspr(SPRN_MCAR);
if (is_in_pci_mem_space(addr)) {
- if (user_mode(regs)) {
- pagefault_disable();
- ret = get_user(inst, (__u32 __user *)regs->nip);
- pagefault_enable();
- } else {
- ret = probe_kernel_address((void *)regs->nip, inst);
- }
+ if (user_mode(regs))
+ ret = copy_from_user_nofault(&inst,
+ (void __user *)regs->nip, sizeof(inst));
+ else
+ ret = get_kernel_nofault(inst, (void *)regs->nip);
if (!ret && mcheck_handle_load(regs, inst)) {
regs->nip += 4;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 934a773..b0426f2 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -29,11 +29,11 @@
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/ratelimit.h>
+#include <linux/pgtable.h>
#include <asm/ptrace.h>
#include <asm/signal.h>
#include <asm/io.h>
-#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
@@ -964,7 +964,7 @@
};
#ifdef CONFIG_SMP
-static struct irq_chip mpic_ipi_chip = {
+static const struct irq_chip mpic_ipi_chip = {
.irq_mask = mpic_mask_ipi,
.irq_unmask = mpic_unmask_ipi,
.irq_eoi = mpic_end_ipi,
@@ -978,7 +978,7 @@
};
#ifdef CONFIG_MPIC_U3_HT_IRQS
-static struct irq_chip mpic_irq_ht_chip = {
+static const struct irq_chip mpic_irq_ht_chip = {
.irq_startup = mpic_startup_ht_irq,
.irq_shutdown = mpic_shutdown_ht_irq,
.irq_mask = mpic_mask_irq,
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
deleted file mode 100644
index dc1740c..0000000
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ /dev/null
@@ -1,143 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Simple Memory-Mapped GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio/driver.h>
-#include <linux/slab.h>
-#include <asm/prom.h>
-#include "simple_gpio.h"
-
-struct u8_gpio_chip {
- struct of_mm_gpio_chip mm_gc;
- spinlock_t lock;
-
- /* shadowed data register to clear/set bits safely */
- u8 data;
-};
-
-static u8 u8_pin2mask(unsigned int pin)
-{
- return 1 << (8 - 1 - pin);
-}
-
-static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-
- return !!(in_8(mm_gc->regs) & u8_pin2mask(gpio));
-}
-
-static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct u8_gpio_chip *u8_gc = gpiochip_get_data(gc);
- unsigned long flags;
-
- spin_lock_irqsave(&u8_gc->lock, flags);
-
- if (val)
- u8_gc->data |= u8_pin2mask(gpio);
- else
- u8_gc->data &= ~u8_pin2mask(gpio);
-
- out_8(mm_gc->regs, u8_gc->data);
-
- spin_unlock_irqrestore(&u8_gc->lock, flags);
-}
-
-static int u8_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
- return 0;
-}
-
-static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
- u8_gpio_set(gc, gpio, val);
- return 0;
-}
-
-static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
- struct u8_gpio_chip *u8_gc =
- container_of(mm_gc, struct u8_gpio_chip, mm_gc);
-
- u8_gc->data = in_8(mm_gc->regs);
-}
-
-static int __init u8_simple_gpiochip_add(struct device_node *np)
-{
- int ret;
- struct u8_gpio_chip *u8_gc;
- struct of_mm_gpio_chip *mm_gc;
- struct gpio_chip *gc;
-
- u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
- if (!u8_gc)
- return -ENOMEM;
-
- spin_lock_init(&u8_gc->lock);
-
- mm_gc = &u8_gc->mm_gc;
- gc = &mm_gc->gc;
-
- mm_gc->save_regs = u8_gpio_save_regs;
- gc->ngpio = 8;
- gc->direction_input = u8_gpio_dir_in;
- gc->direction_output = u8_gpio_dir_out;
- gc->get = u8_gpio_get;
- gc->set = u8_gpio_set;
-
- ret = of_mm_gpiochip_add_data(np, mm_gc, u8_gc);
- if (ret)
- goto err;
- return 0;
-err:
- kfree(u8_gc);
- return ret;
-}
-
-void __init simple_gpiochip_init(const char *compatible)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, compatible) {
- int ret;
- struct resource r;
-
- ret = of_address_to_resource(np, 0, &r);
- if (ret)
- goto err;
-
- switch (resource_size(&r)) {
- case 1:
- ret = u8_simple_gpiochip_add(np);
- if (ret)
- goto err;
- break;
- default:
- /*
- * Whenever you need support for GPIO bank width > 1,
- * please just turn u8_ code into huge macros, and
- * construct needed uX_ code with it.
- */
- ret = -ENOSYS;
- goto err;
- }
- continue;
-err:
- pr_err("%pOF: registration failed, status %d\n", np, ret);
- }
-}
diff --git a/arch/powerpc/sysdev/simple_gpio.h b/arch/powerpc/sysdev/simple_gpio.h
deleted file mode 100644
index f3f3a20..0000000
--- a/arch/powerpc/sysdev/simple_gpio.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SYSDEV_SIMPLE_GPIO_H
-#define __SYSDEV_SIMPLE_GPIO_H
-
-#include <linux/errno.h>
-
-#ifdef CONFIG_SIMPLE_GPIO
-extern void simple_gpiochip_init(const char *compatible);
-#else
-static inline void simple_gpiochip_init(const char *compatible) {}
-#endif /* CONFIG_SIMPLE_GPIO */
-
-#endif /* __SYSDEV_SIMPLE_GPIO_H */
diff --git a/arch/powerpc/sysdev/xics/ics-rtas.c b/arch/powerpc/sysdev/xics/ics-rtas.c
index 6aabc74..4cf1800 100644
--- a/arch/powerpc/sysdev/xics/ics-rtas.c
+++ b/arch/powerpc/sysdev/xics/ics-rtas.c
@@ -50,8 +50,8 @@
server = xics_get_irq_server(d->irq, irq_data_get_affinity_mask(d), 0);
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq, server,
- DEFAULT_PRIORITY);
+ call_status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL, hw_irq,
+ server, DEFAULT_PRIORITY);
if (call_status != 0) {
printk(KERN_ERR
"%s: ibm_set_xive irq %u server %x returned %d\n",
@@ -60,7 +60,7 @@
}
/* Now unmask the interrupt (often a no-op) */
- call_status = rtas_call(ibm_int_on, 1, 1, NULL, hw_irq);
+ call_status = rtas_call_reentrant(ibm_int_on, 1, 1, NULL, hw_irq);
if (call_status != 0) {
printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
__func__, hw_irq, call_status);
@@ -91,7 +91,7 @@
if (hw_irq == XICS_IPI)
return;
- call_status = rtas_call(ibm_int_off, 1, 1, NULL, hw_irq);
+ call_status = rtas_call_reentrant(ibm_int_off, 1, 1, NULL, hw_irq);
if (call_status != 0) {
printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
__func__, hw_irq, call_status);
@@ -99,8 +99,8 @@
}
/* Have to set XIVE to 0xff to be able to remove a slot */
- call_status = rtas_call(ibm_set_xive, 3, 1, NULL, hw_irq,
- xics_default_server, 0xff);
+ call_status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL, hw_irq,
+ xics_default_server, 0xff);
if (call_status != 0) {
printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
__func__, hw_irq, call_status);
@@ -131,7 +131,7 @@
if (hw_irq == XICS_IPI || hw_irq == XICS_IRQ_SPURIOUS)
return -1;
- status = rtas_call(ibm_get_xive, 1, 3, xics_status, hw_irq);
+ status = rtas_call_reentrant(ibm_get_xive, 1, 3, xics_status, hw_irq);
if (status) {
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
@@ -146,8 +146,8 @@
return -1;
}
- status = rtas_call(ibm_set_xive, 3, 1, NULL,
- hw_irq, irq_server, xics_status[1]);
+ status = rtas_call_reentrant(ibm_set_xive, 3, 1, NULL,
+ hw_irq, irq_server, xics_status[1]);
if (status) {
printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
@@ -179,7 +179,7 @@
return -EINVAL;
/* Check if RTAS knows about this interrupt */
- rc = rtas_call(ibm_get_xive, 1, 3, status, hw_irq);
+ rc = rtas_call_reentrant(ibm_get_xive, 1, 3, status, hw_irq);
if (rc)
return -ENXIO;
@@ -198,7 +198,7 @@
{
int rc, status[2];
- rc = rtas_call(ibm_get_xive, 1, 3, status, vec);
+ rc = rtas_call_reentrant(ibm_get_xive, 1, 3, status, vec);
if (rc)
return -1;
return status[0];
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
deleted file mode 100644
index 4a86dcf..0000000
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Interrupt controller driver for Xilinx Virtex FPGAs
- *
- * Copyright (C) 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-/*
- * This is a driver for the interrupt controller typically found in
- * Xilinx Virtex FPGA designs.
- *
- * The interrupt sense levels are hard coded into the FPGA design with
- * typically a 1:1 relationship between irq lines and devices (no shared
- * irq lines). Therefore, this driver does not attempt to handle edge
- * and level interrupts differently.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/i8259.h>
-#include <asm/irq.h>
-#include <linux/irqchip.h>
-
-#if defined(CONFIG_PPC_I8259)
-/*
- * Support code for cascading to 8259 interrupt controllers
- */
-static void xilinx_i8259_cascade(struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- unsigned int cascade_irq = i8259_irq();
-
- if (cascade_irq)
- generic_handle_irq(cascade_irq);
-
- /* Let xilinx_intc end the interrupt */
- chip->irq_unmask(&desc->irq_data);
-}
-
-static void __init xilinx_i8259_setup_cascade(void)
-{
- struct device_node *cascade_node;
- int cascade_irq;
-
- /* Initialize i8259 controller */
- cascade_node = of_find_compatible_node(NULL, NULL, "chrp,iic");
- if (!cascade_node)
- return;
-
- cascade_irq = irq_of_parse_and_map(cascade_node, 0);
- if (!cascade_irq) {
- pr_err("virtex_ml510: Failed to map cascade interrupt\n");
- goto out;
- }
-
- i8259_init(cascade_node, 0);
- irq_set_chained_handler(cascade_irq, xilinx_i8259_cascade);
-
- /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
- /* This looks like a dirty hack to me --gcl */
- outb(0xc0, 0x4d0);
- outb(0xc0, 0x4d1);
-
- out:
- of_node_put(cascade_node);
-}
-#else
-static inline void xilinx_i8259_setup_cascade(void) { return; }
-#endif /* defined(CONFIG_PPC_I8259) */
-
-/*
- * Initialize master Xilinx interrupt controller
- */
-void __init xilinx_intc_init_tree(void)
-{
- irqchip_init();
- xilinx_i8259_setup_cascade();
-}
diff --git a/arch/powerpc/sysdev/xilinx_pci.c b/arch/powerpc/sysdev/xilinx_pci.c
deleted file mode 100644
index fea5667..0000000
--- a/arch/powerpc/sysdev/xilinx_pci.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * PCI support for Xilinx plbv46_pci soft-core which can be used on
- * Xilinx Virtex ML410 / ML510 boards.
- *
- * Copyright 2009 Roderick Colenbrander
- * Copyright 2009 Secret Lab Technologies Ltd.
- *
- * The pci bridge fixup code was copied from ppc4xx_pci.c and was written
- * by Benjamin Herrenschmidt.
- * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/pci.h>
-#include <mm/mmu_decl.h>
-#include <asm/io.h>
-#include <asm/xilinx_pci.h>
-
-#define XPLB_PCI_ADDR 0x10c
-#define XPLB_PCI_DATA 0x110
-#define XPLB_PCI_BUS 0x114
-
-#define PCI_HOST_ENABLE_CMD PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
-
-static const struct of_device_id xilinx_pci_match[] = {
- { .compatible = "xlnx,plbv46-pci-1.03.a", },
- {}
-};
-
-/**
- * xilinx_pci_fixup_bridge - Block Xilinx PHB configuration.
- */
-static void xilinx_pci_fixup_bridge(struct pci_dev *dev)
-{
- struct pci_controller *hose;
- int i;
-
- if (dev->devfn || dev->bus->self)
- return;
-
- hose = pci_bus_to_host(dev->bus);
- if (!hose)
- return;
-
- if (!of_match_node(xilinx_pci_match, hose->dn))
- return;
-
- /* Hide the PCI host BARs from the kernel as their content doesn't
- * fit well in the resource management
- */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
-
- dev_info(&dev->dev, "Hiding Xilinx plb-pci host bridge resources %s\n",
- pci_name(dev));
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, xilinx_pci_fixup_bridge);
-
-/**
- * xilinx_pci_exclude_device - Don't do config access for non-root bus
- *
- * This is a hack. Config access to any bus other than bus 0 does not
- * currently work on the ML510 so we prevent it here.
- */
-static int
-xilinx_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
-{
- return (bus != 0);
-}
-
-/**
- * xilinx_pci_init - Find and register a Xilinx PCI host bridge
- */
-void __init xilinx_pci_init(void)
-{
- struct pci_controller *hose;
- struct resource r;
- void __iomem *pci_reg;
- struct device_node *pci_node;
-
- pci_node = of_find_matching_node(NULL, xilinx_pci_match);
- if(!pci_node)
- return;
-
- if (of_address_to_resource(pci_node, 0, &r)) {
- pr_err("xilinx-pci: cannot resolve base address\n");
- return;
- }
-
- hose = pcibios_alloc_controller(pci_node);
- if (!hose) {
- pr_err("xilinx-pci: pcibios_alloc_controller() failed\n");
- return;
- }
-
- /* Setup config space */
- setup_indirect_pci(hose, r.start + XPLB_PCI_ADDR,
- r.start + XPLB_PCI_DATA,
- PPC_INDIRECT_TYPE_SET_CFG_TYPE);
-
- /* According to the xilinx plbv46_pci documentation the soft-core starts
- * a self-init when the bus master enable bit is set. Without this bit
- * set the pci bus can't be scanned.
- */
- early_write_config_word(hose, 0, 0, PCI_COMMAND, PCI_HOST_ENABLE_CMD);
-
- /* Set the max latency timer to 255 */
- early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0xff);
-
- /* Set the max bus number to 255 */
- pci_reg = of_iomap(pci_node, 0);
- out_8(pci_reg + XPLB_PCI_BUS, 0xff);
- iounmap(pci_reg);
-
- /* Nothing past the root bridge is working right now. By default
- * exclude config access to anything except bus 0 */
- if (!ppc_md.pci_exclude_device)
- ppc_md.pci_exclude_device = xilinx_pci_exclude_device;
-
- /* Register the host bridge with the linux kernel! */
- pci_process_bridge_OF_ranges(hose, pci_node, 1);
-
- pr_info("xilinx-pci: Registered PCI host bridge\n");
-}
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index 2d4c09a..6018f73 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -21,6 +21,7 @@
#include <linux/msi.h>
#include <linux/vmalloc.h>
+#include <asm/debugfs.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/smp.h>
@@ -196,6 +197,9 @@
{
u64 val;
+ if (offset == XIVE_ESB_SET_PQ_10 && xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
+ offset |= XIVE_ESB_LD_ST_MO;
+
/* Handle HW errata */
if (xd->flags & XIVE_IRQ_FLAG_SHIFT_BUG)
offset |= offset << 4;
@@ -287,7 +291,10 @@
struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
u64 val = xive_esb_read(xd, XIVE_ESB_GET);
- xmon_printf("PQ=%c%c",
+ xmon_printf("flags=%c%c%c PQ=%c%c",
+ xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
+ xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
+ xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
val & XIVE_ESB_VAL_P ? 'P' : '-',
val & XIVE_ESB_VAL_Q ? 'Q' : '-');
}
@@ -990,7 +997,8 @@
* interrupt to be inactive in that case.
*/
*state = (pq != XIVE_ESB_INVALID) && !xd->stale_p &&
- (xd->saved_p || !!(pq & XIVE_ESB_VAL_P));
+ (xd->saved_p || (!!(pq & XIVE_ESB_VAL_P) &&
+ !irqd_irq_disabled(data)));
return 0;
default:
return -EINVAL;
@@ -1563,3 +1571,107 @@
return 0;
}
__setup("xive=off", xive_off);
+
+static void xive_debug_show_cpu(struct seq_file *m, int cpu)
+{
+ struct xive_cpu *xc = per_cpu(xive_cpu, cpu);
+
+ seq_printf(m, "CPU %d:", cpu);
+ if (xc) {
+ seq_printf(m, "pp=%02x CPPR=%02x ", xc->pending_prio, xc->cppr);
+
+#ifdef CONFIG_SMP
+ {
+ u64 val = xive_esb_read(&xc->ipi_data, XIVE_ESB_GET);
+
+ seq_printf(m, "IPI=0x%08x PQ=%c%c ", xc->hw_ipi,
+ val & XIVE_ESB_VAL_P ? 'P' : '-',
+ val & XIVE_ESB_VAL_Q ? 'Q' : '-');
+ }
+#endif
+ {
+ struct xive_q *q = &xc->queue[xive_irq_priority];
+ u32 i0, i1, idx;
+
+ if (q->qpage) {
+ idx = q->idx;
+ i0 = be32_to_cpup(q->qpage + idx);
+ idx = (idx + 1) & q->msk;
+ i1 = be32_to_cpup(q->qpage + idx);
+ seq_printf(m, "EQ idx=%d T=%d %08x %08x ...",
+ q->idx, q->toggle, i0, i1);
+ }
+ }
+ }
+ seq_puts(m, "\n");
+}
+
+static void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data *d)
+{
+ struct irq_chip *chip = irq_data_get_irq_chip(d);
+ int rc;
+ u32 target;
+ u8 prio;
+ u32 lirq;
+ struct xive_irq_data *xd;
+ u64 val;
+
+ if (!is_xive_irq(chip))
+ return;
+
+ rc = xive_ops->get_irq_config(hw_irq, &target, &prio, &lirq);
+ if (rc) {
+ seq_printf(m, "IRQ 0x%08x : no config rc=%d\n", hw_irq, rc);
+ return;
+ }
+
+ seq_printf(m, "IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
+ hw_irq, target, prio, lirq);
+
+ xd = irq_data_get_irq_handler_data(d);
+ val = xive_esb_read(xd, XIVE_ESB_GET);
+ seq_printf(m, "flags=%c%c%c PQ=%c%c",
+ xd->flags & XIVE_IRQ_FLAG_STORE_EOI ? 'S' : ' ',
+ xd->flags & XIVE_IRQ_FLAG_LSI ? 'L' : ' ',
+ xd->flags & XIVE_IRQ_FLAG_H_INT_ESB ? 'H' : ' ',
+ val & XIVE_ESB_VAL_P ? 'P' : '-',
+ val & XIVE_ESB_VAL_Q ? 'Q' : '-');
+ seq_puts(m, "\n");
+}
+
+static int xive_core_debug_show(struct seq_file *m, void *private)
+{
+ unsigned int i;
+ struct irq_desc *desc;
+ int cpu;
+
+ if (xive_ops->debug_show)
+ xive_ops->debug_show(m, private);
+
+ for_each_possible_cpu(cpu)
+ xive_debug_show_cpu(m, cpu);
+
+ for_each_irq_desc(i, desc) {
+ struct irq_data *d = irq_desc_get_irq_data(desc);
+ unsigned int hw_irq;
+
+ if (!d)
+ continue;
+
+ hw_irq = (unsigned int)irqd_to_hwirq(d);
+
+ /* IPIs are special (HW number 0) */
+ if (hw_irq)
+ xive_debug_show_irq(m, hw_irq, d);
+ }
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(xive_core_debug);
+
+int xive_core_debug_init(void)
+{
+ if (xive_enabled())
+ debugfs_create_file("xive", 0400, powerpc_debugfs_root,
+ NULL, &xive_core_debug_fops);
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/xive/native.c b/arch/powerpc/sysdev/xive/native.c
index 3fd0865..cb58ec7 100644
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -20,6 +20,7 @@
#include <linux/mm.h>
#include <linux/kmemleak.h>
+#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/smp.h>
@@ -280,12 +281,12 @@
}
#endif /* CONFIG_SMP */
-u32 xive_native_alloc_irq(void)
+u32 xive_native_alloc_irq_on_chip(u32 chip_id)
{
s64 rc;
for (;;) {
- rc = opal_xive_allocate_irq(OPAL_XIVE_ANY_CHIP);
+ rc = opal_xive_allocate_irq(chip_id);
if (rc != OPAL_BUSY)
break;
msleep(OPAL_BUSY_DELAY_MS);
@@ -294,7 +295,7 @@
return 0;
return rc;
}
-EXPORT_SYMBOL_GPL(xive_native_alloc_irq);
+EXPORT_SYMBOL_GPL(xive_native_alloc_irq_on_chip);
void xive_native_free_irq(u32 irq)
{
@@ -852,3 +853,5 @@
return 0;
}
EXPORT_SYMBOL_GPL(xive_native_get_vp_state);
+
+machine_arch_initcall(powernv, xive_core_debug_init);
diff --git a/arch/powerpc/sysdev/xive/spapr.c b/arch/powerpc/sysdev/xive/spapr.c
index 3f15615..b57eeaf 100644
--- a/arch/powerpc/sysdev/xive/spapr.c
+++ b/arch/powerpc/sysdev/xive/spapr.c
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/libfdt.h>
+#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/smp.h>
@@ -26,6 +27,8 @@
#include <asm/xive.h>
#include <asm/xive-regs.h>
#include <asm/hvcall.h>
+#include <asm/svm.h>
+#include <asm/ultravisor.h>
#include "xive-internal.h"
@@ -501,6 +504,9 @@
rc = -EIO;
} else {
q->qpage = qpage;
+ if (is_secure_guest())
+ uv_share_page(PHYS_PFN(qpage_phys),
+ 1 << xive_alloc_order(order));
}
fail:
return rc;
@@ -534,6 +540,8 @@
hw_cpu, prio);
alloc_order = xive_alloc_order(xive_queue_shift);
+ if (is_secure_guest())
+ uv_unshare_page(PHYS_PFN(__pa(q->qpage)), 1 << alloc_order);
free_pages((unsigned long)q->qpage, alloc_order);
q->qpage = NULL;
}
@@ -645,6 +653,24 @@
plpar_int_sync(0, hw_irq);
}
+static int xive_spapr_debug_show(struct seq_file *m, void *private)
+{
+ struct xive_irq_bitmap *xibm;
+ char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+
+ if (!buf)
+ return -ENOMEM;
+
+ list_for_each_entry(xibm, &xive_irq_bitmaps, list) {
+ memset(buf, 0, PAGE_SIZE);
+ bitmap_print_to_pagebuf(true, buf, xibm->bitmap, xibm->count);
+ seq_printf(m, "bitmap #%d: %s", xibm->count, buf);
+ }
+ kfree(buf);
+
+ return 0;
+}
+
static const struct xive_ops xive_spapr_ops = {
.populate_irq_data = xive_spapr_populate_irq_data,
.configure_irq = xive_spapr_configure_irq,
@@ -662,6 +688,7 @@
#ifdef CONFIG_SMP
.get_ipi = xive_spapr_get_ipi,
.put_ipi = xive_spapr_put_ipi,
+ .debug_show = xive_spapr_debug_show,
#endif /* CONFIG_SMP */
.name = "spapr",
};
@@ -744,7 +771,7 @@
return vec5 + index;
}
-static bool xive_spapr_disabled(void)
+static bool __init xive_spapr_disabled(void)
{
const u8 *vec5_xive;
@@ -839,3 +866,5 @@
pr_info("Using %dkB queues\n", 1 << (xive_queue_shift - 10));
return true;
}
+
+machine_arch_initcall(pseries, xive_core_debug_init);
diff --git a/arch/powerpc/sysdev/xive/xive-internal.h b/arch/powerpc/sysdev/xive/xive-internal.h
index 382980f..b7b901d 100644
--- a/arch/powerpc/sysdev/xive/xive-internal.h
+++ b/arch/powerpc/sysdev/xive/xive-internal.h
@@ -57,12 +57,14 @@
int (*get_ipi)(unsigned int cpu, struct xive_cpu *xc);
void (*put_ipi)(unsigned int cpu, struct xive_cpu *xc);
#endif
+ int (*debug_show)(struct seq_file *m, void *private);
const char *name;
};
bool xive_core_init(const struct xive_ops *ops, void __iomem *area, u32 offset,
u8 max_prio);
__be32 *xive_queue_page_alloc(unsigned int cpu, u32 queue_shift);
+int xive_core_debug_init(void);
static inline u32 xive_alloc_order(u32 queue_shift)
{