Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 829950b..f579ce4 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -24,6 +24,7 @@
#include <asm/kvm_asm.h>
#include <asm/kvm_booke_hv_asm.h>
#include <asm/feature-fixups.h>
+#include <asm/context_tracking.h>
/* XXX This will ultimately add space for a special exception save
* structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
@@ -987,7 +988,6 @@
.endm
masked_interrupt_book3e_0x500:
- // XXX When adding support for EPR, use PACA_IRQ_EE_EDGE
masked_interrupt_book3e PACA_IRQ_EE 1
masked_interrupt_book3e_0x900:
@@ -1003,38 +1003,6 @@
masked_interrupt_book3e PACA_IRQ_DBELL 0
/*
- * Called from arch_local_irq_enable when an interrupt needs
- * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280
- * to indicate the kind of interrupt. MSR:EE is already off.
- * We generate a stackframe like if a real interrupt had happened.
- *
- * Note: While MSR:EE is off, we need to make sure that _MSR
- * in the generated frame has EE set to 1 or the exception
- * handler will not properly re-enable them.
- */
-_GLOBAL(__replay_interrupt)
- /* We are going to jump to the exception common code which
- * will retrieve various register values from the PACA which
- * we don't give a damn about.
- */
- mflr r10
- mfmsr r11
- mfcr r4
- mtspr SPRN_SPRG_GEN_SCRATCH,r13;
- std r1,PACA_EXGEN+EX_R1(r13);
- stw r4,PACA_EXGEN+EX_CR(r13);
- ori r11,r11,MSR_EE
- subi r1,r1,INT_FRAME_SIZE;
- cmpwi cr0,r3,0x500
- beq exc_0x500_common
- cmpwi cr0,r3,0x900
- beq exc_0x900_common
- cmpwi cr0,r3,0x280
- beq exc_0x280_common
- blr
-
-
-/*
* This is called from 0x300 and 0x400 handlers after the prologs with
* r14 and r15 containing the fault address and error code, with the
* original values stashed away in the PACA
@@ -1073,17 +1041,161 @@
bl alignment_exception
b ret_from_except
-/*
- * We branch here from entry_64.S for the last stage of the exception
- * return code path. MSR:EE is expected to be off at that point
- */
-_GLOBAL(exception_return_book3e)
- b 1f
+ .align 7
+_GLOBAL(ret_from_except)
+ ld r11,_TRAP(r1)
+ andi. r0,r11,1
+ bne ret_from_except_lite
+ REST_NVGPRS(r1)
+
+_GLOBAL(ret_from_except_lite)
+ /*
+ * Disable interrupts so that current_thread_info()->flags
+ * can't change between when we test it and when we return
+ * from the interrupt.
+ */
+ wrteei 0
+
+ ld r9, PACA_THREAD_INFO(r13)
+ ld r3,_MSR(r1)
+ ld r10,PACACURRENT(r13)
+ ld r4,TI_FLAGS(r9)
+ andi. r3,r3,MSR_PR
+ beq resume_kernel
+ lwz r3,(THREAD+THREAD_DBCR0)(r10)
+
+ /* Check current_thread_info()->flags */
+ andi. r0,r4,_TIF_USER_WORK_MASK
+ bne 1f
+ /*
+ * Check to see if the dbcr0 register is set up to debug.
+ * Use the internal debug mode bit to do this.
+ */
+ andis. r0,r3,DBCR0_IDM@h
+ beq restore
+ mfmsr r0
+ rlwinm r0,r0,0,~MSR_DE /* Clear MSR.DE */
+ mtmsr r0
+ mtspr SPRN_DBCR0,r3
+ li r10, -1
+ mtspr SPRN_DBSR,r10
+ b restore
+1: andi. r0,r4,_TIF_NEED_RESCHED
+ beq 2f
+ bl restore_interrupts
+ SCHEDULE_USER
+ b ret_from_except_lite
+2:
+ bl save_nvgprs
+ /*
+ * Use a non volatile GPR to save and restore our thread_info flags
+ * across the call to restore_interrupts.
+ */
+ mr r30,r4
+ bl restore_interrupts
+ mr r4,r30
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_notify_resume
+ b ret_from_except
+
+resume_kernel:
+ /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
+ andis. r8,r4,_TIF_EMULATE_STACK_STORE@h
+ beq+ 1f
+
+ addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
+
+ ld r3,GPR1(r1)
+ subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
+ mr r4,r1 /* src: current exception frame */
+ mr r1,r3 /* Reroute the trampoline frame to r1 */
+
+ /* Copy from the original to the trampoline. */
+ li r5,INT_FRAME_SIZE/8 /* size: INT_FRAME_SIZE */
+ li r6,0 /* start offset: 0 */
+ mtctr r5
+2: ldx r0,r6,r4
+ stdx r0,r6,r3
+ addi r6,r6,8
+ bdnz 2b
+
+ /* Do real store operation to complete stdu */
+ ld r5,GPR1(r1)
+ std r8,0(r5)
+
+ /* Clear _TIF_EMULATE_STACK_STORE flag */
+ lis r11,_TIF_EMULATE_STACK_STORE@h
+ addi r5,r9,TI_FLAGS
+0: ldarx r4,0,r5
+ andc r4,r4,r11
+ stdcx. r4,0,r5
+ bne- 0b
+1:
+
+#ifdef CONFIG_PREEMPT
+ /* Check if we need to preempt */
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq+ restore
+ /* Check that preempt_count() == 0 and interrupts are enabled */
+ lwz r8,TI_PREEMPT(r9)
+ cmpwi cr0,r8,0
+ bne restore
+ ld r0,SOFTE(r1)
+ andi. r0,r0,IRQS_DISABLED
+ bne restore
+
+ /*
+ * Here we are preempting the current task. We want to make
+ * sure we are soft-disabled first and reconcile irq state.
+ */
+ RECONCILE_IRQ_STATE(r3,r4)
+ bl preempt_schedule_irq
+
+ /*
+ * arch_local_irq_restore() from preempt_schedule_irq above may
+ * enable hard interrupt but we really should disable interrupts
+ * when we return from the interrupt, and so that we don't get
+ * interrupted after loading SRR0/1.
+ */
+ wrteei 0
+#endif /* CONFIG_PREEMPT */
+
+restore:
+ /*
+ * This is the main kernel exit path. First we check if we
+ * are about to re-enable interrupts
+ */
+ ld r5,SOFTE(r1)
+ lbz r6,PACAIRQSOFTMASK(r13)
+ andi. r5,r5,IRQS_DISABLED
+ bne .Lrestore_irq_off
+
+ /* We are enabling, were we already enabled ? Yes, just return */
+ andi. r6,r6,IRQS_DISABLED
+ beq cr0,fast_exception_return
+
+ /*
+ * We are about to soft-enable interrupts (we are hard disabled
+ * at this point). We check if there's anything that needs to
+ * be replayed first.
+ */
+ lbz r0,PACAIRQHAPPENED(r13)
+ cmpwi cr0,r0,0
+ bne- .Lrestore_check_irq_replay
+
+ /*
+ * Get here when nothing happened while soft-disabled, just
+ * soft-enable and move-on. We will hard-enable as a side
+ * effect of rfi
+ */
+.Lrestore_no_replay:
+ TRACE_ENABLE_INTS
+ li r0,IRQS_ENABLED
+ stb r0,PACAIRQSOFTMASK(r13);
/* This is the return from load_up_fpu fast path which could do with
* less GPR restores in fact, but for now we have a single return path
*/
- .globl fast_exception_return
fast_exception_return:
wrteei 0
1: mr r0,r13
@@ -1124,6 +1236,92 @@
mfspr r13,SPRN_SPRG_GEN_SCRATCH
rfi
+ /*
+ * We are returning to a context with interrupts soft disabled.
+ *
+ * However, we may also about to hard enable, so we need to
+ * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
+ * or that bit can get out of sync and bad things will happen
+ */
+.Lrestore_irq_off:
+ ld r3,_MSR(r1)
+ lbz r7,PACAIRQHAPPENED(r13)
+ andi. r0,r3,MSR_EE
+ beq 1f
+ rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS
+ stb r7,PACAIRQHAPPENED(r13)
+1:
+#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
+ /* The interrupt should not have soft enabled. */
+ lbz r7,PACAIRQSOFTMASK(r13)
+1: tdeqi r7,IRQS_ENABLED
+ EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
+#endif
+ b fast_exception_return
+
+ /*
+ * Something did happen, check if a re-emit is needed
+ * (this also clears paca->irq_happened)
+ */
+.Lrestore_check_irq_replay:
+ /* XXX: We could implement a fast path here where we check
+ * for irq_happened being just 0x01, in which case we can
+ * clear it and return. That means that we would potentially
+ * miss a decrementer having wrapped all the way around.
+ *
+ * Still, this might be useful for things like hash_page
+ */
+ bl __check_irq_replay
+ cmpwi cr0,r3,0
+ beq .Lrestore_no_replay
+
+ /*
+ * We need to re-emit an interrupt. We do so by re-using our
+ * existing exception frame. We first change the trap value,
+ * but we need to ensure we preserve the low nibble of it
+ */
+ ld r4,_TRAP(r1)
+ clrldi r4,r4,60
+ or r4,r4,r3
+ std r4,_TRAP(r1)
+
+ /*
+ * PACA_IRQ_HARD_DIS won't always be set here, so set it now
+ * to reconcile the IRQ state. Tracing is already accounted for.
+ */
+ lbz r4,PACAIRQHAPPENED(r13)
+ ori r4,r4,PACA_IRQ_HARD_DIS
+ stb r4,PACAIRQHAPPENED(r13)
+
+ /*
+ * Then find the right handler and call it. Interrupts are
+ * still soft-disabled and we keep them that way.
+ */
+ cmpwi cr0,r3,0x500
+ bne 1f
+ addi r3,r1,STACK_FRAME_OVERHEAD;
+ bl do_IRQ
+ b ret_from_except
+1: cmpwi cr0,r3,0x900
+ bne 1f
+ addi r3,r1,STACK_FRAME_OVERHEAD;
+ bl timer_interrupt
+ b ret_from_except
+#ifdef CONFIG_PPC_DOORBELL
+1:
+ cmpwi cr0,r3,0x280
+ bne 1f
+ addi r3,r1,STACK_FRAME_OVERHEAD;
+ bl doorbell_exception
+#endif /* CONFIG_PPC_DOORBELL */
+1: b ret_from_except /* What else to do here ? */
+
+_ASM_NOKPROBE_SYMBOL(ret_from_except);
+_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
+_ASM_NOKPROBE_SYMBOL(resume_kernel);
+_ASM_NOKPROBE_SYMBOL(restore);
+_ASM_NOKPROBE_SYMBOL(fast_exception_return);
+
/*
* Trampolines used when spotting a bad kernel stack pointer in
* the exception entry code.
@@ -1346,16 +1544,6 @@
sync
isync
-/*
- * The mapping only needs to be cache-coherent on SMP, except on
- * Freescale e500mc derivatives where it's also needed for coherent DMA.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
-#define M_IF_NEEDED MAS2_M
-#else
-#define M_IF_NEEDED 0
-#endif
-
/* 6. Setup KERNELBASE mapping in TLB[0]
*
* r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
@@ -1368,7 +1556,7 @@
ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
mtspr SPRN_MAS1,r6
- LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_NEEDED)
+ LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED)
mtspr SPRN_MAS2,r6
rlwinm r5,r5,0,0,25