Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index d96a101..2012fa8 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/mach/arch.h>
@@ -633,7 +632,7 @@
int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO);
pmd_t *pmd;
- pmd = pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
+ pmd = pmd_off_k(virt);
*pmd = __pmd(phys | prot);
flush_pmd_entry(pmd);
}
@@ -653,7 +652,7 @@
*/
static void __init get_assabet_scr(void)
{
- unsigned long uninitialized_var(scr), i;
+ unsigned long scr, i;
GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */
GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 3cc2b71..bd3a52f 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -30,6 +30,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/power/gpio-charger.h>
#include <video/sa1100fb.h>
@@ -131,16 +132,23 @@
/*
* Collie AC IN
*/
+static struct gpiod_lookup_table collie_power_gpiod_table = {
+ .dev_id = "gpio-charger",
+ .table = {
+ GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN,
+ NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static char *collie_ac_supplied_to[] = {
"main-battery",
"backup-battery",
};
-
static struct gpio_charger_platform_data collie_power_data = {
.name = "charger",
.type = POWER_SUPPLY_TYPE_MAINS,
- .gpio = COLLIE_GPIO_AC_IN,
.supplied_to = collie_ac_supplied_to,
.num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
};
@@ -386,6 +394,8 @@
platform_scoop_config = &collie_pcmcia_config;
+ gpiod_add_lookup_table(&collie_power_gpiod_table);
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 6d37d26..3085f1c 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,11 +22,11 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
+#include <linux/pgtable.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
-#include <asm/pgtable.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5bc82e2..351f891 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -104,6 +104,14 @@
.enabled_at_boot = 1,
};
+static struct gpiod_lookup_table shannon_display_gpio_table = {
+ .dev_id = "sa11x0-fb",
+ .table = {
+ GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init shannon_init(void)
{
sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
@@ -113,6 +121,7 @@
sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
sa11x0_ppc_configure_mcp();
+ gpiod_add_lookup_table(&shannon_display_gpio_table);
sa11x0_register_lcd(&shannon_lcd_info);
sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
sa11x0_register_mcp(&shannon_mcp_data);