Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index f4fe4d0..e1cb04e 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -8,19 +8,21 @@
*/
#ifndef __ASM_ARM_FLOPPY_H
#define __ASM_ARM_FLOPPY_H
-#if 0
-#include <mach/floppy.h>
-#endif
-#define fd_outb(val,port) \
- do { \
- if ((port) == (u32)FD_DOR) \
- fd_setdor((val)); \
- else \
- outb((val),(port)); \
+#define fd_outb(val, base, reg) \
+ do { \
+ int new_val = (val); \
+ if ((reg) == FD_DOR) { \
+ if (new_val & 0xf0) \
+ new_val = (new_val & 0x0c) | \
+ floppy_selects[new_val & 3]; \
+ else \
+ new_val &= 0x0c; \
+ } \
+ outb(new_val, (base) + (reg)); \
} while(0)
-#define fd_inb(port) inb((port))
+#define fd_inb(base, reg) inb((base) + (reg))
#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
0,"floppy",NULL)
#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
@@ -53,69 +55,7 @@
* to a non-zero track, and then restoring it to track 0. If an error occurs,
* then there is no floppy drive present. [to be put back in again]
*/
-static unsigned char floppy_selects[2][4] =
-{
- { 0x10, 0x21, 0x23, 0x33 },
- { 0x10, 0x21, 0x23, 0x33 }
-};
-
-#define fd_setdor(dor) \
-do { \
- int new_dor = (dor); \
- if (new_dor & 0xf0) \
- new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \
- else \
- new_dor &= 0x0c; \
- outb(new_dor, FD_DOR); \
-} while (0)
-
-/*
- * Someday, we'll automatically detect which drives are present...
- */
-static inline void fd_scandrives (void)
-{
-#if 0
- int floppy, drive_count;
-
- fd_disable_irq();
- raw_cmd = &default_raw_cmd;
- raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
- raw_cmd->track = 0;
- raw_cmd->rate = ?;
- drive_count = 0;
- for (floppy = 0; floppy < 4; floppy ++) {
- current_drive = drive_count;
- /*
- * Turn on floppy motor
- */
- if (start_motor(redo_fd_request))
- continue;
- /*
- * Set up FDC
- */
- fdc_specify();
- /*
- * Tell FDC to recalibrate
- */
- output_byte(FD_RECALIBRATE);
- LAST_OUT(UNIT(floppy));
- /* wait for command to complete */
- if (!successful) {
- int i;
- for (i = drive_count; i < 3; i--)
- floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
- floppy_selects[fdc][3] = 0;
- floppy -= 1;
- } else
- drive_count++;
- }
-#else
- floppy_selects[0][0] = 0x10;
- floppy_selects[0][1] = 0x21;
- floppy_selects[0][2] = 0x23;
- floppy_selects[0][3] = 0x33;
-#endif
-}
+static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
#define FDC1 (0x3f0)
@@ -135,9 +75,7 @@
*/
static void driveswap(int *ints, int dummy, int dummy2)
{
- floppy_selects[0][0] ^= floppy_selects[0][1];
- floppy_selects[0][1] ^= floppy_selects[0][0];
- floppy_selects[0][0] ^= floppy_selects[0][1];
+ swap(floppy_selects[0], floppy_selects[1]);
}
#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }