Update Linux to v5.10.109
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.10.109.tar.xz
Change-Id: I19bca9fc6762d4e63bcf3e4cba88bbe560d9c76c
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 23dc002..41f07b3 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -8,18 +8,19 @@
#include <linux/delay.h>
#include <linux/root_dev.h>
#include <linux/clk.h>
-#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/sizes.h>
#include <linux/cpu.h>
+#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <linux/of.h>
#include <linux/cache.h>
#include <uapi/linux/mount.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
+#include <asm/asserts.h>
#include <asm/tlb.h>
#include <asm/setup.h>
#include <asm/page.h>
@@ -27,6 +28,7 @@
#include <asm/unwind.h>
#include <asm/mach_desc.h>
#include <asm/smp.h>
+#include <asm/dsp-impl.h>
#define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x))
@@ -56,10 +58,12 @@
{ 0x00, NULL }
};
-static const struct id_to_str arc_cpu_rel[] = {
+static const struct id_to_str arc_hs_ver54_rel[] = {
/* UARCH.MAJOR, Release */
{ 0, "R3.10a"},
{ 1, "R3.50a"},
+ { 2, "R3.60a"},
+ { 3, "R4.00a"},
{ 0xFF, NULL }
};
@@ -115,12 +119,6 @@
struct bcr_uarch_build_arcv2 uarch;
const struct id_to_str *tbl;
- /*
- * Up until (including) the first core4 release (0x54) things were
- * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family
- * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue)
- */
-
if (cpu->core.family < 0x54) { /* includes arc700 */
for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
@@ -141,11 +139,10 @@
}
/*
- * However the subsequent HS release (same 0x54) allow HS38 or HS48
- * configurations and encode this info in a different BCR.
- * The BCR was introduced in 0x54 so can't be read unconditionally.
+ * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+ * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+ * releases only update it.
*/
-
READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
if (uarch.prod == 4) {
@@ -156,7 +153,7 @@
cpu->name = "HS38";
}
- for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) {
+ for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
if (uarch.maj == tbl->id) {
cpu->release = tbl->str;
break;
@@ -390,11 +387,24 @@
return buf;
}
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena)
+{
+ if (hw_exists && !opt_ena)
+ pr_warn(" ! Enable %s for working apps\n", opt_name);
+ else if (!hw_exists && opt_ena)
+ panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
+{
+ if (!hw_exists && opt_ena)
+ panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
static void arc_chk_core_config(void)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
- int saved = 0, present = 0;
- char *opt_nm = NULL;
+ int present = 0;
if (!cpu->extn.timer0)
panic("Timer0 is not present!\n");
@@ -426,23 +436,16 @@
*/
if (is_isa_arcompact()) {
- opt_nm = "CONFIG_ARC_FPU_SAVE_RESTORE";
- saved = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
-
/* only DPDP checked since SP has no arch visible regs */
present = cpu->extn.fpu_dp;
+ CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
} else {
- opt_nm = "CONFIG_ARC_HAS_ACCL_REGS";
- saved = IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS);
-
/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
- }
+ CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
- if (present && !saved)
- pr_warn("Enable %s for working apps\n", opt_nm);
- else if (!present && saved)
- panic("Disable %s, hardware NOT present\n", opt_nm);
+ dsp_config_check();
+ }
}
/*
@@ -573,10 +576,6 @@
*/
root_mountflags &= ~MS_RDONLY;
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-
arc_unwind_init();
}