Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/tools/testing/selftests/rseq/Makefile b/tools/testing/selftests/rseq/Makefile
index c30c52e..d646953 100644
--- a/tools/testing/selftests/rseq/Makefile
+++ b/tools/testing/selftests/rseq/Makefile
@@ -1,5 +1,11 @@
# SPDX-License-Identifier: GPL-2.0+ OR MIT
-CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./
+
+ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
+CLANG_FLAGS += -no-integrated-as
+endif
+
+CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ \
+ $(CLANG_FLAGS)
LDLIBS += -lpthread
# Own dependencies because we only want to build against 1st prerequisite, but
diff --git a/tools/testing/selftests/rseq/rseq-arm.h b/tools/testing/selftests/rseq/rseq-arm.h
index 3cea198..5943c81 100644
--- a/tools/testing/selftests/rseq/rseq-arm.h
+++ b/tools/testing/selftests/rseq/rseq-arm.h
@@ -5,7 +5,60 @@
* (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*/
-#define RSEQ_SIG 0x53053053
+/*
+ * - ARM little endian
+ *
+ * RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand
+ * value 0x5de3. This traps if user-space reaches this instruction by mistake,
+ * and the uncommon operand ensures the kernel does not move the instruction
+ * pointer to attacker-controlled code on rseq abort.
+ *
+ * The instruction pattern in the A32 instruction set is:
+ *
+ * e7f5def3 udf #24035 ; 0x5de3
+ *
+ * This translates to the following instruction pattern in the T16 instruction
+ * set:
+ *
+ * little endian:
+ * def3 udf #243 ; 0xf3
+ * e7f5 b.n <7f5>
+ *
+ * - ARMv6+ big endian (BE8):
+ *
+ * ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian
+ * code and big-endian data. The data value of the signature needs to have its
+ * byte order reversed to generate the trap instruction:
+ *
+ * Data: 0xf3def5e7
+ *
+ * Translates to this A32 instruction pattern:
+ *
+ * e7f5def3 udf #24035 ; 0x5de3
+ *
+ * Translates to this T16 instruction pattern:
+ *
+ * def3 udf #243 ; 0xf3
+ * e7f5 b.n <7f5>
+ *
+ * - Prior to ARMv6 big endian (BE32):
+ *
+ * Prior to ARMv6, -mbig-endian generates big-endian code and data
+ * (which match), so the endianness of the data representation of the
+ * signature should not be reversed. However, the choice between BE32
+ * and BE8 is done by the linker, so we cannot know whether code and
+ * data endianness will be mixed before the linker is invoked. So rather
+ * than try to play tricks with the linker, the rseq signature is simply
+ * data (not a trap instruction) prior to ARMv6 on big endian. This is
+ * why the signature is expressed as data (.word) rather than as
+ * instruction (.inst) in assembler.
+ */
+
+#ifdef __ARMEB__
+#define RSEQ_SIG 0xf3def5e7 /* udf #24035 ; 0x5de3 (ARMv6+) */
+#else
+#define RSEQ_SIG 0xe7f5def3 /* udf #24035 ; 0x5de3 */
+#endif
#define rseq_smp_mb() __asm__ __volatile__ ("dmb" ::: "memory", "cc")
#define rseq_smp_rmb() __asm__ __volatile__ ("dmb" ::: "memory", "cc")
@@ -30,18 +83,35 @@
#include "rseq-skip.h"
#else /* !RSEQ_SKIP_FASTPATH */
-#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \
+#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \
post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
+ __rseq_str(label) ":\n\t" \
".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".word " __rseq_str(label) "b, 0x0\n\t" \
".popsection\n\t"
-#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \
- __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \
+#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
+ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \
+ ".popsection\n\t"
+
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
"adr r0, " __rseq_str(cs_label) "\n\t" \
@@ -86,7 +156,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -148,7 +223,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -214,7 +294,10 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -266,7 +349,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -336,7 +424,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -407,7 +500,13 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -485,7 +584,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
"str %[src], %[rseq_scratch0]\n\t"
"str %[dst], %[rseq_scratch1]\n\t"
"str %[len], %[rseq_scratch2]\n\t"
@@ -604,7 +708,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
"str %[src], %[rseq_scratch0]\n\t"
"str %[dst], %[rseq_scratch1]\n\t"
"str %[len], %[rseq_scratch2]\n\t"
diff --git a/tools/testing/selftests/rseq/rseq-arm64.h b/tools/testing/selftests/rseq/rseq-arm64.h
index 954f346..200dae9 100644
--- a/tools/testing/selftests/rseq/rseq-arm64.h
+++ b/tools/testing/selftests/rseq/rseq-arm64.h
@@ -6,7 +6,20 @@
* (C) Copyright 2018 - Will Deacon <will.deacon@arm.com>
*/
-#define RSEQ_SIG 0xd428bc00 /* BRK #0x45E0 */
+/*
+ * aarch64 -mbig-endian generates mixed endianness code vs data:
+ * little-endian code and big-endian data. Ensure the RSEQ_SIG signature
+ * matches code endianness.
+ */
+#define RSEQ_SIG_CODE 0xd428bc00 /* BRK #0x45E0. */
+
+#ifdef __AARCH64EB__
+#define RSEQ_SIG_DATA 0x00bc28d4 /* BRK #0x45E0. */
+#else
+#define RSEQ_SIG_DATA RSEQ_SIG_CODE
+#endif
+
+#define RSEQ_SIG RSEQ_SIG_DATA
#define rseq_smp_mb() __asm__ __volatile__ ("dmb ish" ::: "memory")
#define rseq_smp_rmb() __asm__ __volatile__ ("dmb ishld" ::: "memory")
@@ -82,19 +95,35 @@
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \
post_commit_offset, abort_ip) \
- " .pushsection __rseq_table, \"aw\"\n" \
+ " .pushsection __rseq_cs, \"aw\"\n" \
" .balign 32\n" \
__rseq_str(label) ":\n" \
" .long " __rseq_str(version) ", " __rseq_str(flags) "\n" \
" .quad " __rseq_str(start_ip) ", " \
__rseq_str(post_commit_offset) ", " \
__rseq_str(abort_ip) "\n" \
+ " .popsection\n\t" \
+ " .pushsection __rseq_cs_ptr_array, \"aw\"\n" \
+ " .quad " __rseq_str(label) "b\n" \
" .popsection\n"
#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ " .pushsection __rseq_exit_point_array, \"aw\"\n" \
+ " .quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n" \
+ " .popsection\n"
+
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
" adrp " RSEQ_ASM_TMP_REG ", " __rseq_str(cs_label) "\n" \
@@ -105,7 +134,7 @@
#define RSEQ_ASM_DEFINE_ABORT(label, abort_label) \
" b 222f\n" \
- " .inst " __rseq_str(RSEQ_SIG) "\n" \
+ " .inst " __rseq_str(RSEQ_SIG_CODE) "\n" \
__rseq_str(label) ":\n" \
" b %l[" __rseq_str(abort_label) "]\n" \
"222:\n"
@@ -182,6 +211,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -231,6 +265,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -282,6 +321,9 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -325,6 +367,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -379,6 +426,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -433,6 +485,12 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error3])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -490,6 +548,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
@@ -545,6 +608,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(1, 2f, 3f, 4f)
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(2f, %l[error2])
+#endif
RSEQ_ASM_STORE_RSEQ_CS(2, 1b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
RSEQ_INJECT_ASM(3)
diff --git a/tools/testing/selftests/rseq/rseq-mips.h b/tools/testing/selftests/rseq/rseq-mips.h
index 7f48ecf..e989e7c 100644
--- a/tools/testing/selftests/rseq/rseq-mips.h
+++ b/tools/testing/selftests/rseq/rseq-mips.h
@@ -7,7 +7,39 @@
* (C) Copyright 2016-2018 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*/
-#define RSEQ_SIG 0x53053053
+/*
+ * RSEQ_SIG uses the break instruction. The instruction pattern is:
+ *
+ * On MIPS:
+ * 0350000d break 0x350
+ *
+ * On nanoMIPS:
+ * 00100350 break 0x350
+ *
+ * On microMIPS:
+ * 0000d407 break 0x350
+ *
+ * For nanoMIPS32 and microMIPS, the instruction stream is encoded as 16-bit
+ * halfwords, so the signature halfwords need to be swapped accordingly for
+ * little-endian.
+ */
+#if defined(__nanomips__)
+# ifdef __MIPSEL__
+# define RSEQ_SIG 0x03500010
+# else
+# define RSEQ_SIG 0x00100350
+# endif
+#elif defined(__mips_micromips)
+# ifdef __MIPSEL__
+# define RSEQ_SIG 0xd4070000
+# else
+# define RSEQ_SIG 0x0000d407
+# endif
+#elif defined(__mips__)
+# define RSEQ_SIG 0x0350000d
+#else
+/* Unknown MIPS architecture. */
+#endif
#define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory")
#define rseq_smp_rmb() rseq_smp_mb()
@@ -54,20 +86,38 @@
# error unsupported _MIPS_SZLONG
#endif
-#define __RSEQ_ASM_DEFINE_TABLE(version, flags, start_ip, \
+#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \
post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
+ __rseq_str(label) ":\n\t" \
".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \
LONG " " U32_U64_PAD(__rseq_str(post_commit_offset)) "\n\t" \
LONG " " U32_U64_PAD(__rseq_str(abort_ip)) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ LONG " " U32_U64_PAD(__rseq_str(label) "b") "\n\t" \
".popsection\n\t"
-#define RSEQ_ASM_DEFINE_TABLE(start_ip, post_commit_ip, abort_ip) \
- __RSEQ_ASM_DEFINE_TABLE(0x0, 0x0, start_ip, \
+#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
+ __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ LONG " " U32_U64_PAD(__rseq_str(start_ip)) "\n\t" \
+ LONG " " U32_U64_PAD(__rseq_str(exit_ip)) "\n\t" \
+ ".popsection\n\t"
+
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
LONG_LA " $4, " __rseq_str(cs_label) "\n\t" \
@@ -113,7 +163,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -173,7 +228,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -237,7 +297,10 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -289,7 +352,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -357,7 +425,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -426,7 +499,13 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3f, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -500,7 +579,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
LONG_S " %[src], %[rseq_scratch0]\n\t"
LONG_S " %[dst], %[rseq_scratch1]\n\t"
LONG_S " %[len], %[rseq_scratch2]\n\t"
@@ -616,7 +700,12 @@
rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
- RSEQ_ASM_DEFINE_TABLE(1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
LONG_S " %[src], %[rseq_scratch0]\n\t"
LONG_S " %[dst], %[rseq_scratch1]\n\t"
LONG_S " %[len], %[rseq_scratch2]\n\t"
diff --git a/tools/testing/selftests/rseq/rseq-ppc.h b/tools/testing/selftests/rseq/rseq-ppc.h
index 52630c9..76be901 100644
--- a/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/tools/testing/selftests/rseq/rseq-ppc.h
@@ -6,7 +6,15 @@
* (C) Copyright 2016-2018 - Boqun Feng <boqun.feng@gmail.com>
*/
-#define RSEQ_SIG 0x53053053
+/*
+ * RSEQ_SIG is used with the following trap instruction:
+ *
+ * powerpc-be: 0f e5 00 0b twui r5,11
+ * powerpc64-le: 0b 00 e5 0f twui r5,11
+ * powerpc64-be: 0f e5 00 0b twui r5,11
+ */
+
+#define RSEQ_SIG 0x0fe5000b
#define rseq_smp_mb() __asm__ __volatile__ ("sync" ::: "memory", "cc")
#define rseq_smp_lwsync() __asm__ __volatile__ ("lwsync" ::: "memory", "cc")
@@ -33,8 +41,8 @@
#else /* !RSEQ_SKIP_FASTPATH */
/*
- * The __rseq_table section can be used by debuggers to better handle
- * single-stepping through the restartable critical sections.
+ * The __rseq_cs_ptr_array and __rseq_cs sections can be used by debuggers to
+ * better handle single-stepping through the restartable critical sections.
*/
#ifdef __PPC64__
@@ -46,11 +54,14 @@
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(label) "b\n\t" \
".popsection\n\t"
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
@@ -63,6 +74,19 @@
"std %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \
__rseq_str(label) ":\n\t"
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
+ ".popsection\n\t"
+
#else /* #ifdef __PPC64__ */
#define STORE_WORD "stw "
@@ -72,12 +96,29 @@
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
/* 32-bit only supported on BE */ \
".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".long 0x0, " __rseq_str(label) "b\n\t" \
+ ".popsection\n\t"
+
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ /* 32-bit only supported on BE */ \
+ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
@@ -169,6 +210,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -224,6 +270,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -286,6 +337,9 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -337,6 +391,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -400,6 +459,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -465,6 +529,12 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
/* cmp cpuid */
@@ -532,6 +602,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* setup for mempcy */
"mr %%r19, %[len]\n\t"
"mr %%r20, %[src]\n\t"
@@ -601,6 +676,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* setup for mempcy */
"mr %%r19, %[len]\n\t"
"mr %%r20, %[src]\n\t"
diff --git a/tools/testing/selftests/rseq/rseq-s390.h b/tools/testing/selftests/rseq/rseq-s390.h
index 1069e85..8ef94ad 100644
--- a/tools/testing/selftests/rseq/rseq-s390.h
+++ b/tools/testing/selftests/rseq/rseq-s390.h
@@ -1,6 +1,13 @@
/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
-#define RSEQ_SIG 0x53053053
+/*
+ * RSEQ_SIG uses the trap4 instruction. As Linux does not make use of the
+ * access-register mode nor the linkage stack this instruction will always
+ * cause a special-operation exception (the trap-enabled bit in the DUCT
+ * is and will stay 0). The instruction pattern is
+ * b2 ff 0f ff trap4 4095(%r0)
+ */
+#define RSEQ_SIG 0xB2FF0FFF
#define rseq_smp_mb() __asm__ __volatile__ ("bcr 15,0" ::: "memory")
#define rseq_smp_rmb() rseq_smp_mb()
@@ -37,22 +44,54 @@
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(label) "b\n\t" \
+ ".popsection\n\t"
+
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#elif __s390__
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".long 0x0, " __rseq_str(label) "b\n\t" \
+ ".popsection\n\t"
+
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".long 0x0, " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) "\n\t" \
".popsection\n\t"
#define LONG_L "l"
@@ -85,14 +124,14 @@
".long " __rseq_str(RSEQ_SIG) "\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
- "j %l[" __rseq_str(abort_label) "]\n\t" \
+ "jg %l[" __rseq_str(abort_label) "]\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
- "j %l[" __rseq_str(cmpfail_label) "]\n\t" \
+ "jg %l[" __rseq_str(cmpfail_label) "]\n\t" \
".popsection\n\t"
static inline __attribute__((always_inline))
@@ -102,6 +141,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -160,6 +204,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -220,6 +269,9 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -268,6 +320,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -339,6 +396,12 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
@@ -407,6 +470,11 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
LONG_S " %[src], %[rseq_scratch0]\n\t"
LONG_S " %[dst], %[rseq_scratch1]\n\t"
LONG_S " %[len], %[rseq_scratch2]\n\t"
diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h
index 089410a..b2da600 100644
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -7,8 +7,25 @@
#include <stdint.h>
+/*
+ * RSEQ_SIG is used with the following reserved undefined instructions, which
+ * trap in user-space:
+ *
+ * x86-32: 0f b9 3d 53 30 05 53 ud1 0x53053053,%edi
+ * x86-64: 0f b9 3d 53 30 05 53 ud1 0x53053053(%rip),%edi
+ */
#define RSEQ_SIG 0x53053053
+/*
+ * Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input
+ * operands, we cannot use "m" input operands, and rather pass the __rseq_abi
+ * address through a "r" input operand.
+ */
+
+/* Offset of cpu_id and rseq_cs fields in struct rseq. */
+#define RSEQ_CPU_ID_OFFSET 4
+#define RSEQ_CS_OFFSET 8
+
#ifdef __x86_64__
#define rseq_smp_mb() \
@@ -37,32 +54,49 @@
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".quad " __rseq_str(start_ip) ", " __rseq_str(post_commit_offset) ", " __rseq_str(abort_ip) "\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(label) "b\n\t" \
".popsection\n\t"
+
#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".quad " __rseq_str(start_ip) ", " __rseq_str(exit_ip) "\n\t" \
+ ".popsection\n\t"
+
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
"leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \
- "movq %%rax, %[" __rseq_str(rseq_cs) "]\n\t" \
+ "movq %%rax, " __rseq_str(rseq_cs) "\n\t" \
__rseq_str(label) ":\n\t"
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
RSEQ_INJECT_ASM(2) \
- "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \
+ "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
"jnz " __rseq_str(label) "\n\t"
#define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
- /* Disassembler-friendly signature: nopl <sig>(%rip). */\
- ".byte 0x0f, 0x1f, 0x05\n\t" \
+ /* Disassembler-friendly signature: ud1 <sig>(%rip),%edi. */ \
+ ".byte 0x0f, 0xb9, 0x3d\n\t" \
".long " __rseq_str(RSEQ_SIG) "\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
@@ -83,15 +117,20 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -102,8 +141,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -140,16 +178,21 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movq %[v], %%rbx\n\t"
"cmpq %%rbx, %[expectnot]\n\t"
"je %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"movq %[v], %%rbx\n\t"
"cmpq %%rbx, %[expectnot]\n\t"
"je %l[error2]\n\t"
@@ -164,8 +207,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -199,12 +241,15 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
#endif
/* final store */
"addq %[count], %[v]\n\t"
@@ -213,8 +258,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[count] "er" (count)
@@ -244,15 +288,20 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -266,8 +315,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -314,9 +362,15 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
@@ -325,7 +379,7 @@
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(5)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
"cmpq %[v2], %[expect2]\n\t"
@@ -338,8 +392,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -381,18 +434,23 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
"movq %[src], %[rseq_scratch0]\n\t"
"movq %[dst], %[rseq_scratch1]\n\t"
"movq %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f)
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
"cmpq %[v], %[expect]\n\t"
"jnz 7f\n\t"
#endif
@@ -440,8 +498,7 @@
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -520,31 +577,47 @@
*/
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
- ".pushsection __rseq_table, \"aw\"\n\t" \
+ ".pushsection __rseq_cs, \"aw\"\n\t" \
".balign 32\n\t" \
__rseq_str(label) ":\n\t" \
".long " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
+ ".popsection\n\t" \
+ ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
+ ".long " __rseq_str(label) "b, 0x0\n\t" \
".popsection\n\t"
#define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
__RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
(post_commit_ip - start_ip), abort_ip)
+/*
+ * Exit points of a rseq critical section consist of all instructions outside
+ * of the critical section where a critical section can either branch to or
+ * reach through the normal course of its execution. The abort IP and the
+ * post-commit IP are already part of the __rseq_cs section and should not be
+ * explicitly defined as additional exit points. Knowing all exit points is
+ * useful to assist debuggers stepping over the critical section.
+ */
+#define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
+ ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
+ ".long " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \
+ ".popsection\n\t"
+
#define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
RSEQ_INJECT_ASM(1) \
- "movl $" __rseq_str(cs_label) ", %[rseq_cs]\n\t" \
+ "movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \
__rseq_str(label) ":\n\t"
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
RSEQ_INJECT_ASM(2) \
- "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \
+ "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \
"jnz " __rseq_str(label) "\n\t"
#define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \
".pushsection __rseq_failure, \"ax\"\n\t" \
- /* Disassembler-friendly signature: nopl <sig>. */ \
- ".byte 0x0f, 0x1f, 0x05\n\t" \
+ /* Disassembler-friendly signature: ud1 <sig>,%edi. */ \
+ ".byte 0x0f, 0xb9, 0x3d\n\t" \
".long " __rseq_str(RSEQ_SIG) "\n\t" \
__rseq_str(label) ":\n\t" \
teardown \
@@ -565,15 +638,20 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -584,8 +662,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -622,16 +699,21 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[v], %%ebx\n\t"
"cmpl %%ebx, %[expectnot]\n\t"
"je %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"movl %[v], %%ebx\n\t"
"cmpl %%ebx, %[expectnot]\n\t"
"je %l[error2]\n\t"
@@ -646,8 +728,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -681,12 +762,15 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
#endif
/* final store */
"addl %[count], %[v]\n\t"
@@ -695,8 +779,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[count] "ir" (count)
@@ -726,15 +809,20 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -749,8 +837,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* try store input */
[v2] "m" (*v2),
[newv2] "m" (newv2),
@@ -788,16 +875,21 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %[v], %%eax\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"movl %[expect], %%eax\n\t"
"cmpl %[v], %%eax\n\t"
"jnz %l[error2]\n\t"
@@ -813,8 +905,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -853,9 +944,15 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
+#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
@@ -864,7 +961,7 @@
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(5)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
"cmpl %[expect2], %[v2]\n\t"
@@ -878,8 +975,7 @@
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -922,19 +1018,24 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
"movl %[src], %[rseq_scratch0]\n\t"
"movl %[dst], %[rseq_scratch1]\n\t"
"movl %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f)
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 7f\n\t"
@@ -984,8 +1085,7 @@
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
@@ -1030,19 +1130,24 @@
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
+#ifdef RSEQ_COMPARE_TWICE
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
+ RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
+#endif
"movl %[src], %[rseq_scratch0]\n\t"
"movl %[dst], %[rseq_scratch1]\n\t"
"movl %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs)
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f)
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 7f\n\t"
@@ -1093,8 +1198,7 @@
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [rseq_abi] "r" (&__rseq_abi),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c
index 4847e97..7159eb7 100644
--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -25,18 +25,27 @@
#include <syscall.h>
#include <assert.h>
#include <signal.h>
+#include <limits.h>
#include "rseq.h"
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
-__attribute__((tls_model("initial-exec"))) __thread
-volatile struct rseq __rseq_abi = {
+__thread volatile struct rseq __rseq_abi = {
.cpu_id = RSEQ_CPU_ID_UNINITIALIZED,
};
-static __attribute__((tls_model("initial-exec"))) __thread
-volatile int refcount;
+/*
+ * Shared with other libraries. This library may take rseq ownership if it is
+ * still 0 when executing the library constructor. Set to 1 by library
+ * constructor when handling rseq. Set to 0 in destructor if handling rseq.
+ */
+int __rseq_handled;
+
+/* Whether this library have ownership of rseq registration. */
+static int rseq_ownership;
+
+static __thread volatile uint32_t __rseq_refcount;
static void signal_off_save(sigset_t *oldset)
{
@@ -69,8 +78,14 @@
int rc, ret = 0;
sigset_t oldset;
+ if (!rseq_ownership)
+ return 0;
signal_off_save(&oldset);
- if (refcount++)
+ if (__rseq_refcount == UINT_MAX) {
+ ret = -1;
+ goto end;
+ }
+ if (__rseq_refcount++)
goto end;
rc = sys_rseq(&__rseq_abi, sizeof(struct rseq), 0, RSEQ_SIG);
if (!rc) {
@@ -78,9 +93,9 @@
goto end;
}
if (errno != EBUSY)
- __rseq_abi.cpu_id = -2;
+ __rseq_abi.cpu_id = RSEQ_CPU_ID_REGISTRATION_FAILED;
ret = -1;
- refcount--;
+ __rseq_refcount--;
end:
signal_restore(oldset);
return ret;
@@ -91,13 +106,20 @@
int rc, ret = 0;
sigset_t oldset;
+ if (!rseq_ownership)
+ return 0;
signal_off_save(&oldset);
- if (--refcount)
+ if (!__rseq_refcount) {
+ ret = -1;
+ goto end;
+ }
+ if (--__rseq_refcount)
goto end;
rc = sys_rseq(&__rseq_abi, sizeof(struct rseq),
RSEQ_FLAG_UNREGISTER, RSEQ_SIG);
if (!rc)
goto end;
+ __rseq_refcount = 1;
ret = -1;
end:
signal_restore(oldset);
@@ -115,3 +137,20 @@
}
return cpu;
}
+
+void __attribute__((constructor)) rseq_init(void)
+{
+ /* Check whether rseq is handled by another library. */
+ if (__rseq_handled)
+ return;
+ __rseq_handled = 1;
+ rseq_ownership = 1;
+}
+
+void __attribute__((destructor)) rseq_fini(void)
+{
+ if (!rseq_ownership)
+ return;
+ __rseq_handled = 0;
+ rseq_ownership = 0;
+}
diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h
index c72eb70..d40d60e 100644
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -16,7 +16,6 @@
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
-#include <sched.h>
#include <linux/rseq.h>
/*
@@ -45,6 +44,7 @@
#endif
extern __thread volatile struct rseq __rseq_abi;
+extern int __rseq_handled;
#define rseq_likely(x) __builtin_expect(!!(x), 1)
#define rseq_unlikely(x) __builtin_expect(!!(x), 0)
diff --git a/tools/testing/selftests/rseq/run_param_test.sh b/tools/testing/selftests/rseq/run_param_test.sh
index 3acd6d7..e426304 100755
--- a/tools/testing/selftests/rseq/run_param_test.sh
+++ b/tools/testing/selftests/rseq/run_param_test.sh
@@ -1,6 +1,8 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0+ or MIT
+NR_CPUS=`grep '^processor' /proc/cpuinfo | wc -l`
+
EXTRA_ARGS=${@}
OLDIFS="$IFS"
@@ -28,15 +30,16 @@
REPS=1000
SLOW_REPS=100
+NR_THREADS=$((6*${NR_CPUS}))
function do_tests()
{
local i=0
while [ "$i" -lt "${#TEST_LIST[@]}" ]; do
echo "Running test ${TEST_NAME[$i]}"
- ./param_test ${TEST_LIST[$i]} -r ${REPS} ${@} ${EXTRA_ARGS} || exit 1
+ ./param_test ${TEST_LIST[$i]} -r ${REPS} -t ${NR_THREADS} ${@} ${EXTRA_ARGS} || exit 1
echo "Running compare-twice test ${TEST_NAME[$i]}"
- ./param_test_compare_twice ${TEST_LIST[$i]} -r ${REPS} ${@} ${EXTRA_ARGS} || exit 1
+ ./param_test_compare_twice ${TEST_LIST[$i]} -r ${REPS} -t ${NR_THREADS} ${@} ${EXTRA_ARGS} || exit 1
let "i++"
done
}