Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index f0017c8..4cdbae6 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -6,18 +6,23 @@
TARGETS += cgroup
TARGETS += cpufreq
TARGETS += cpu-hotplug
+TARGETS += drivers/dma-buf
TARGETS += efivarfs
TARGETS += exec
TARGETS += filesystems
+TARGETS += filesystems/binderfs
TARGETS += firmware
TARGETS += ftrace
TARGETS += futex
TARGETS += gpio
TARGETS += intel_pstate
TARGETS += ipc
+TARGETS += ir
TARGETS += kcmp
+TARGETS += kexec
TARGETS += kvm
TARGETS += lib
+TARGETS += livepatch
TARGETS += membarrier
TARGETS += memfd
TARGETS += memory-hotplug
@@ -25,7 +30,9 @@
TARGETS += mqueue
TARGETS += net
TARGETS += netfilter
+TARGETS += networking/timestamping
TARGETS += nsfs
+TARGETS += pidfd
TARGETS += powerpc
TARGETS += proc
TARGETS += pstore
@@ -43,6 +50,8 @@
ifneq (1, $(quicktest))
TARGETS += timers
endif
+TARGETS += tmpfs
+TARGETS += tpm2
TARGETS += user
TARGETS += vm
TARGETS += x86
@@ -54,6 +63,13 @@
TARGETS_HOTPLUG = cpu-hotplug
TARGETS_HOTPLUG += memory-hotplug
+# User can optionally provide a TARGETS skiplist.
+SKIP_TARGETS ?=
+ifneq ($(SKIP_TARGETS),)
+ TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
+ override TARGETS := $(TMP)
+endif
+
# Clear LDFLAGS and MAKEFLAGS if called from main
# Makefile to avoid test build failures when test
# Makefile doesn't have explicit build rules.
@@ -62,94 +78,148 @@
override MAKEFLAGS =
endif
-ifneq ($(KBUILD_SRC),)
+# Append kselftest to KBUILD_OUTPUT to avoid cluttering
+# KBUILD_OUTPUT with selftest objects and headers installed
+# by selftests Makefile or lib.mk.
+ifdef building_out_of_srctree
override LDFLAGS =
endif
-BUILD := $(O)
-ifndef BUILD
- BUILD := $(KBUILD_OUTPUT)
-endif
-ifndef BUILD
- BUILD := $(shell pwd)
+ifneq ($(O),)
+ BUILD := $(O)
+else
+ ifneq ($(KBUILD_OUTPUT),)
+ BUILD := $(KBUILD_OUTPUT)/kselftest
+ else
+ BUILD := $(shell pwd)
+ DEFAULT_INSTALL_HDR_PATH := 1
+ endif
endif
-# KSFT_TAP_LEVEL is used from KSFT framework to prevent nested TAP header
-# printing from tests. Applicable to run_tests case where run_tests adds
-# TAP header prior running tests and when a test program invokes another
-# with system() call. Export it here to cover override RUN_TESTS defines.
-export KSFT_TAP_LEVEL=`echo 1`
-
+# Prepare for headers install
+top_srcdir ?= ../../..
+include $(top_srcdir)/scripts/subarch.include
+ARCH ?= $(SUBARCH)
+export KSFT_KHDR_INSTALL_DONE := 1
export BUILD
-all:
+
+# build and run gpio when output directory is the src dir.
+# gpio has dependency on tools/gpio and builds tools/gpio
+# objects in the src directory in all cases making the src
+# repo dirty even when objects are relocated.
+ifneq (1,$(DEFAULT_INSTALL_HDR_PATH))
+ TMP := $(filter-out gpio, $(TARGETS))
+ TARGETS := $(TMP)
+endif
+
+# set default goal to all, so make without a target runs all, even when
+# all isn't the first target in the file.
+.DEFAULT_GOAL := all
+
+# Install headers here once for all tests. KSFT_KHDR_INSTALL_DONE
+# is used to avoid running headers_install from lib.mk.
+# Invoke headers install with --no-builtin-rules to avoid circular
+# dependency in "make kselftest" case. In this case, second level
+# make inherits builtin-rules which will use the rule generate
+# Makefile.o and runs into
+# "Circular Makefile.o <- prepare dependency dropped."
+# and headers_install fails and test compile fails.
+#
+# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile
+# invokes them as sub-makes and --no-builtin-rules is not necessary,
+# but doesn't cause any failures. Keep it simple and use the same
+# flags in both cases.
+# Local build cases: "make kselftest", "make -C" - headers are installed
+# in the default INSTALL_HDR_PATH usr/include.
+khdr:
+ifeq (1,$(DEFAULT_INSTALL_HDR_PATH))
+ $(MAKE) --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install
+else
+ $(MAKE) --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \
+ ARCH=$(ARCH) -C $(top_srcdir) headers_install
+endif
+
+all: khdr
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
mkdir $$BUILD_TARGET -p; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_tests: all
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
done;
hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_hotplug: hotplug
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
done;
clean_hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
run_pstore_crash:
- make -C pstore run_crash
+ $(MAKE) -C pstore run_crash
-INSTALL_PATH ?= install
-INSTALL_PATH := $(abspath $(INSTALL_PATH))
+# Use $BUILD as the default install root. $BUILD points to the
+# right output location for the following cases:
+# 1. output_dir=kernel_src
+# 2. a separate output directory is specified using O= KBUILD_OUTPUT
+# 3. a separate output directory is specified using KBUILD_OUTPUT
+# Avoid conflict with INSTALL_PATH set by the main Makefile
+#
+KSFT_INSTALL_PATH ?= $(BUILD)/kselftest_install
+KSFT_INSTALL_PATH := $(abspath $(KSFT_INSTALL_PATH))
+# Avoid changing the rest of the logic here and lib.mk.
+INSTALL_PATH := $(KSFT_INSTALL_PATH)
ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh
-install:
+install: all
ifdef INSTALL_PATH
@# Ask all targets to install their files
- mkdir -p $(INSTALL_PATH)
+ mkdir -p $(INSTALL_PATH)/kselftest
+ install -m 744 kselftest/runner.sh $(INSTALL_PATH)/kselftest/
+ install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
done;
@# Ask all targets to emit their test scripts
echo "#!/bin/sh" > $(ALL_SCRIPT)
echo "BASE_DIR=\$$(realpath \$$(dirname \$$0))" >> $(ALL_SCRIPT)
echo "cd \$$BASE_DIR" >> $(ALL_SCRIPT)
+ echo ". ./kselftest/runner.sh" >> $(ALL_SCRIPT)
echo "ROOT=\$$PWD" >> $(ALL_SCRIPT)
echo "if [ \"\$$1\" = \"--summary\" ]; then" >> $(ALL_SCRIPT)
- echo " OUTPUT=\$$BASE_DIR/output.log" >> $(ALL_SCRIPT)
- echo " cat /dev/null > \$$OUTPUT" >> $(ALL_SCRIPT)
- echo "else" >> $(ALL_SCRIPT)
- echo " OUTPUT=/dev/stdout" >> $(ALL_SCRIPT)
+ echo " logfile=\$$BASE_DIR/output.log" >> $(ALL_SCRIPT)
+ echo " cat /dev/null > \$$logfile" >> $(ALL_SCRIPT)
echo "fi" >> $(ALL_SCRIPT)
- echo "export KSFT_TAP_LEVEL=1" >> $(ALL_SCRIPT)
- echo "export skip=4" >> $(ALL_SCRIPT)
+ @# While building run_kselftest.sh skip also non-existent TARGET dirs:
+ @# they could be the result of a build failure and should NOT be
+ @# included in the generated runlist.
for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- echo "echo ; echo TAP version 13" >> $(ALL_SCRIPT); \
- echo "echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \
- echo "echo ========================================" >> $(ALL_SCRIPT); \
+ [ ! -d $$INSTALL_PATH/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
echo "cd $$TARGET" >> $(ALL_SCRIPT); \
- make -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
+ echo -n "run_many" >> $(ALL_SCRIPT); \
+ echo -n "Emit Tests for $$TARGET\n"; \
+ $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
+ echo "" >> $(ALL_SCRIPT); \
echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
done;
@@ -161,7 +231,7 @@
clean:
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
- make OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
-.PHONY: all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean
+.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean