Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 7acc16f..beee59c 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
* Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018-2019 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -52,6 +52,11 @@
#define NL80211_MULTICAST_GROUP_NAN "nan"
#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
+#define NL80211_EDMG_BW_CONFIG_MIN 4
+#define NL80211_EDMG_BW_CONFIG_MAX 15
+#define NL80211_EDMG_CHANNELS_MIN 1
+#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */
+
/**
* DOC: Station handling
*
@@ -235,6 +240,15 @@
*/
/**
+ * DOC: SAE authentication offload
+ *
+ * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
+ * support offloading SAE authentication for WPA3-Personal networks. In
+ * %NL80211_CMD_CONNECT the password for SAE should be specified using
+ * %NL80211_ATTR_SAE_PASSWORD.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -648,7 +662,9 @@
* is used during CSA period.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
- * time if it is known that it is no longer necessary.
+ * time if it is known that it is no longer necessary. This command is
+ * also sent as an event whenever the driver has completed the off-channel
+ * wait time.
* @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
* @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
* transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
@@ -1033,6 +1049,58 @@
* %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its
* address(specified in %NL80211_ATTR_MAC).
*
+ * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in
+ * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
+ *
+ * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s)
+ * with the given parameters, which are encapsulated in the nested
+ * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
+ * randomization may be enabled and configured by specifying the
+ * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes.
+ * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
+ * A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in
+ * the netlink extended ack message.
+ *
+ * To cancel a measurement, close the socket that requested it.
+ *
+ * Measurement results are reported to the socket that requested the
+ * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they
+ * become available, so applications must ensure a large enough socket
+ * buffer size.
+ *
+ * Depending on driver support it may or may not be possible to start
+ * multiple concurrent measurements.
+ * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the
+ * result notification from the driver to the requesting socket.
+ * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that
+ * the measurement completed, using the measurement cookie
+ * (%NL80211_ATTR_COOKIE).
+ *
+ * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was
+ * detected and reported by a neighboring device on the channel
+ * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
+ * determining the width and type.
+ *
+ * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
+ * offload OWE processing to user space. This intends to support
+ * OWE AKM by the host drivers that implement SME but rely
+ * on the user space for the cryptographic/DH IE processing in AP mode.
+ *
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
+ * refreshing, is that from one mesh point we be able to send some data
+ * frames to other mesh points which are not currently selected as a
+ * primary traffic path, but which are only 1 hop away. The absence of
+ * the primary path to the chosen node makes it necessary to apply some
+ * form of marking on a chosen packet stream so that the packets can be
+ * properly steered to the selected node for testing, and not by the
+ * regular mesh path lookup. Further, the packets must be of type data
+ * so that the rate control (often embedded in firmware) is used for
+ * rate selection.
+ *
+ * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
+ * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
+ * content. The frame is ethernet data.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1245,6 +1313,18 @@
NL80211_CMD_CONTROL_PORT_FRAME,
+ NL80211_CMD_GET_FTM_RESPONDER_STATS,
+
+ NL80211_CMD_PEER_MEASUREMENT_START,
+ NL80211_CMD_PEER_MEASUREMENT_RESULT,
+ NL80211_CMD_PEER_MEASUREMENT_COMPLETE,
+
+ NL80211_CMD_NOTIFY_RADAR,
+
+ NL80211_CMD_UPDATE_OWE_INFO,
+
+ NL80211_CMD_PROBE_MESH_LINK,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1525,6 +1605,12 @@
* (a u32 with flags from &enum nl80211_wpa_versions).
* @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
* indicate which key management algorithm(s) to use (an array of u32).
+ * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
+ * indicating the supported AKM suites, intended for specific drivers which
+ * implement SME and have constraints on which AKMs are supported and also
+ * the cases where an AKM support is offloaded to the driver/firmware.
+ * If there is no such notification from the driver, user space should
+ * assume the driver supports all the AKM suites.
*
* @NL80211_ATTR_REQ_IE: (Re)association request information elements as
* sent out by the card, for ROAM and successful CONNECT events.
@@ -1701,7 +1787,7 @@
* the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
* is included in the probe request, but the match attributes
* will never let it go through), -EINVAL may be returned.
- * If ommited, no filtering is done.
+ * If omitted, no filtering is done.
*
* @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
* interface combinations. In each nested item, it contains attributes
@@ -1806,7 +1892,7 @@
*
* @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
* used by the drivers which has MLME in firmware and does not have support
- * to report per station tx/rx activity to free up the staion entry from
+ * to report per station tx/rx activity to free up the station entry from
* the list. This needs to be used when the driver advertises the
* capability to timeout the stations.
*
@@ -2167,7 +2253,7 @@
*
* @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
* the specified band is to be adjusted before doing
- * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out
* better BSSs. The attribute value is a packed structure
* value as specified by &struct nl80211_bss_select_rssi_adjust.
*
@@ -2220,10 +2306,10 @@
* &enum nl80211_external_auth_action value). This is used with the
* %NL80211_CMD_EXTERNAL_AUTH request event.
* @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
- * space supports external authentication. This attribute shall be used
- * only with %NL80211_CMD_CONNECT request. The driver may offload
- * authentication processing to user space if this capability is indicated
- * in NL80211_CMD_CONNECT requests from the user space.
+ * space supports external authentication. This attribute shall be used
+ * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
+ * may offload authentication processing to user space if this capability
+ * is indicated in the respective requests from the user space.
*
* @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
* u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
@@ -2241,6 +2327,52 @@
* association request when used with NL80211_CMD_NEW_STATION). Can be set
* only if %NL80211_STA_FLAG_WME is set.
*
+ * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
+ * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
+ * measurement (FTM) responder functionality and containing parameters as
+ * possible, see &enum nl80211_ftm_responder_attr
+ *
+ * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
+ * statistics, see &enum nl80211_ftm_responder_stats.
+ *
+ * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32),
+ * if the attribute is not given no timeout is requested. Note that 0 is an
+ * invalid value.
+ *
+ * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result)
+ * data, uses nested attributes specified in
+ * &enum nl80211_peer_measurement_attrs.
+ * This is also used for capability advertisement in the wiphy information,
+ * with the appropriate sub-attributes.
+ *
+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
+ * scheduler.
+ *
+ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
+ * station associated with the AP. See &enum nl80211_tx_power_setting for
+ * possible values.
+ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
+ * allows to set Tx power for a station. If this attribute is not included,
+ * the default per-interface tx power setting will be overriding. Driver
+ * should be picking up the lowest tx power, either tx power per-interface
+ * or per-station.
+ *
+ * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
+ * is used with %NL80211_CMD_CONNECT to provide password for offloading
+ * SAE authentication for WPA3-Personal networks.
+ *
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
+ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ * channel(s) that are allowed to be used for EDMG transmissions.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
+ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ * the allowed channel bandwidth configurations. (u8 attribute)
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2682,6 +2814,27 @@
NL80211_ATTR_HE_CAPABILITY,
+ NL80211_ATTR_FTM_RESPONDER,
+
+ NL80211_ATTR_FTM_RESPONDER_STATS,
+
+ NL80211_ATTR_TIMEOUT,
+
+ NL80211_ATTR_PEER_MEASUREMENTS,
+
+ NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_STA_TX_POWER_SETTING,
+ NL80211_ATTR_STA_TX_POWER,
+
+ NL80211_ATTR_SAE_PASSWORD,
+
+ NL80211_ATTR_TWT_RESPONDER,
+
+ NL80211_ATTR_HE_OBSS_PD,
+
+ NL80211_ATTR_WIPHY_EDMG_CHANNELS,
+ NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2725,14 +2878,14 @@
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 64
+#define NL80211_MAX_SUPP_REG_RULES 128
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
#define NL80211_HT_CAPABILITY_LEN 26
#define NL80211_VHT_CAPABILITY_LEN 12
#define NL80211_HE_MIN_CAPABILITY_LEN 16
-#define NL80211_HE_MAX_CAPABILITY_LEN 51
+#define NL80211_HE_MAX_CAPABILITY_LEN 54
#define NL80211_MAX_NR_CIPHER_SUITES 5
#define NL80211_MAX_NR_AKM_SUITES 2
@@ -3050,8 +3203,21 @@
* received from the station (u64, usec)
* @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
* @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
- * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data)
- * ACK frame (s8, dBm)
+ * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)
+ * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received
+ * with an FCS error (u32, from this station). This count may not include
+ * some packets with an FCS error due to TA corruption. Hence this counter
+ * might not be fully accurate.
+ * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
+ * mesh gate (u8, 0 or 1)
+ * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
+ * sent to the station (u64, usec)
+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
+ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
+ * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
+ * of STA's association
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -3091,13 +3257,24 @@
NL80211_STA_INFO_RX_DURATION,
NL80211_STA_INFO_PAD,
NL80211_STA_INFO_ACK_SIGNAL,
- NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG,
+ NL80211_STA_INFO_ACK_SIGNAL_AVG,
+ NL80211_STA_INFO_RX_MPDUS,
+ NL80211_STA_INFO_FCS_ERROR_COUNT,
+ NL80211_STA_INFO_CONNECTED_TO_GATE,
+ NL80211_STA_INFO_TX_DURATION,
+ NL80211_STA_INFO_AIRTIME_WEIGHT,
+ NL80211_STA_INFO_AIRTIME_LINK_METRIC,
+ NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
};
+/* we renamed this - stay compatible */
+#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG
+
+
/**
* enum nl80211_tid_stats - per TID statistics attributes
* @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
@@ -3197,8 +3374,10 @@
* &enum nl80211_mpath_flags;
* @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
* @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
+ * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
* @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- * currently defind
+ * currently defined
* @__NL80211_MPATH_INFO_AFTER_LAST: internal use
*/
enum nl80211_mpath_info {
@@ -3210,6 +3389,8 @@
NL80211_MPATH_INFO_FLAGS,
NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+ NL80211_MPATH_INFO_HOP_COUNT,
+ NL80211_MPATH_INFO_PATH_CHANGE,
/* keep last */
__NL80211_MPATH_INFO_AFTER_LAST,
@@ -3265,6 +3446,12 @@
* @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
* @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
* attributes from &enum nl80211_band_iftype_attr
+ * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ * channel(s) that are allowed to be used for EDMG transmissions.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
+ * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ * the allowed channel bandwidth configurations.
+ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
* @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
* @__NL80211_BAND_ATTR_AFTER_LAST: internal use
*/
@@ -3282,6 +3469,9 @@
NL80211_BAND_ATTR_VHT_CAPA,
NL80211_BAND_ATTR_IFTYPE_DATA,
+ NL80211_BAND_ATTR_EDMG_CHANNELS,
+ NL80211_BAND_ATTR_EDMG_BW_CONFIG,
+
/* keep last */
__NL80211_BAND_ATTR_AFTER_LAST,
NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
@@ -3538,6 +3728,14 @@
* value as specified by &struct nl80211_bss_select_rssi_adjust.
* @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
* (this cannot be used together with SSID).
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
+ * band specific minimum rssi thresholds for the bands defined in
+ * enum nl80211_band. The minimum rssi threshold value(s32) specific to a
+ * band shall be encapsulated in attribute with type value equals to one
+ * of the NL80211_BAND_* defined in enum nl80211_band. For example, the
+ * minimum rssi threshold value for 2.4GHZ band shall be encapsulated
+ * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
+ * attributes will be nested within this attribute.
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3550,6 +3748,7 @@
NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
+ NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -3671,6 +3870,8 @@
* @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
* (on this channel or globally)
* @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
+ * receiving frames destined to the local BSS
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -3687,6 +3888,7 @@
NL80211_SURVEY_INFO_TIME_TX,
NL80211_SURVEY_INFO_TIME_SCAN,
NL80211_SURVEY_INFO_PAD,
+ NL80211_SURVEY_INFO_TIME_BSS_RX,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -3867,6 +4069,11 @@
* remove it from the STA's list of peers. You may set this to 0 to disable
* the removal of the STA. Default is 30 minutes.
*
+ * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA
+ * will advertise that it is connected to a gate in the mesh formation
+ * field. If left unset then the mesh formation field will only
+ * advertise such if there is an active root mesh path.
+ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
@@ -3899,6 +4106,7 @@
NL80211_MESHCONF_POWER_MODE,
NL80211_MESHCONF_AWAKE_WINDOW,
NL80211_MESHCONF_PLINK_TIMEOUT,
+ NL80211_MESHCONF_CONNECTED_TO_GATE,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -4029,6 +4237,27 @@
};
/**
+ * enum nl80211_key_mode - Key mode
+ *
+ * @NL80211_KEY_RX_TX: (Default)
+ * Key can be used for Rx and Tx immediately
+ *
+ * The following modes can only be selected for unicast keys and when the
+ * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
+ *
+ * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
+ * Unicast key can only be used for Rx, Tx not allowed, yet
+ * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
+ * The unicast key identified by idx and mac is cleared for Tx and becomes
+ * the preferred Tx key for the station.
+ */
+enum nl80211_key_mode {
+ NL80211_KEY_RX_TX,
+ NL80211_KEY_NO_TX,
+ NL80211_KEY_SET_TX
+};
+
+/**
* enum nl80211_chan_width - channel width definitions
*
* These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
@@ -4233,6 +4462,7 @@
enum nl80211_wpa_versions {
NL80211_WPA_VERSION_1 = 1 << 0,
NL80211_WPA_VERSION_2 = 1 << 1,
+ NL80211_WPA_VERSION_3 = 1 << 2,
};
/**
@@ -4271,6 +4501,9 @@
* @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
* attributes, specifying what a key should be set as default as.
* See &enum nl80211_key_default_types.
+ * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
+ * Defaults to @NL80211_KEY_RX_TX.
+ *
* @__NL80211_KEY_AFTER_LAST: internal
* @NL80211_KEY_MAX: highest key attribute
*/
@@ -4284,6 +4517,7 @@
NL80211_KEY_DEFAULT_MGMT,
NL80211_KEY_TYPE,
NL80211_KEY_DEFAULT_TYPES,
+ NL80211_KEY_MODE,
/* keep last */
__NL80211_KEY_AFTER_LAST,
@@ -4338,7 +4572,8 @@
* enum nl80211_band - Frequency band
* @NL80211_BAND_2GHZ: 2.4 GHz ISM band
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
+ * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
* since newer kernel versions may support more bands
*/
@@ -4346,6 +4581,7 @@
NL80211_BAND_2GHZ,
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
+ NL80211_BAND_6GHZ,
NUM_NL80211_BANDS,
};
@@ -4831,7 +5067,7 @@
* numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
* => allows a STA plus three P2P interfaces
*
- * The list of these four possiblities could completely be contained
+ * The list of these four possibilities could completely be contained
* within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
* that any of these groups must match.
*
@@ -4861,7 +5097,7 @@
* enum nl80211_plink_state - state of a mesh peer link finite state machine
*
* @NL80211_PLINK_LISTEN: initial state, considered the implicit
- * state of non existant mesh peer links
+ * state of non existent mesh peer links
* @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
* this mesh peer
* @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@@ -5137,7 +5373,7 @@
NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
- NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31,
};
/**
@@ -5213,9 +5449,8 @@
* "radar detected" event.
* @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and
* receiving control port frames over nl80211 instead of the netdevice.
- * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack
- * rssi if firmware support, this flag is to intimate about ack rssi
- * support to nl80211.
+ * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports
+ * (average) ACK signal strength reporting.
* @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
* TXQs.
* @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
@@ -5223,6 +5458,31 @@
* @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
* except for supported rates from the probe request content if requested
* by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
+ * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine
+ * timing measurement responder role.
+ *
+ * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are
+ * able to rekey an in-use key correctly. Userspace must not rekey PTK keys
+ * if this flag is not set. Ignoring this can leak clear text packets and/or
+ * freeze the connection.
+ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
+ * Individually Addressed Frames" from IEEE802.11-2016.
+ *
+ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
+ * fairness for transmitted packets and has enabled airtime fairness
+ * scheduling.
+ *
+ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
+ * (set/del PMKSA operations) in AP mode.
+ *
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
+ * filtering of sched scan results using band specific RSSI thresholds.
+ *
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
+ * to a station.
+ *
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
+ * station mode (SAE password is passed as part of the connect command).
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5255,10 +5515,20 @@
NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
NL80211_EXT_FEATURE_DFS_OFFLOAD,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
- NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT,
+ NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
+ /* we renamed this - stay compatible */
+ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT,
NL80211_EXT_FEATURE_TXQS,
NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
+ NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
+ NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
+ NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
+ NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+ NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+ NL80211_EXT_FEATURE_EXT_KEY_ID,
+ NL80211_EXT_FEATURE_STA_TX_PWR,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -5343,7 +5613,7 @@
* request parameters IE in the probe request
* @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- * rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
+ * rate of at least 5.5M. In case non OCE AP is discovered in the channel,
* only the first probe req in the channel will be sent in high rate.
* @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
* tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@@ -5510,9 +5780,14 @@
* Used by cfg80211_rx_mgmt()
*
* @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
+ * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
+ * the authentication. Exclusively defined for host drivers that
+ * advertises the SME functionality but would like the userspace
+ * to handle certain authentication algorithms (e.g. SAE).
*/
enum nl80211_rxmgmt_flags {
NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
+ NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
};
/*
@@ -5798,4 +6073,480 @@
NL80211_EXTERNAL_AUTH_ABORT,
};
+/**
+ * enum nl80211_ftm_responder_attributes - fine timing measurement
+ * responder attributes
+ * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid
+ * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled
+ * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element
+ * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10),
+ * i.e. starting with the measurement token
+ * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element
+ * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13),
+ * i.e. starting with the measurement token
+ * @__NL80211_FTM_RESP_ATTR_LAST: Internal
+ * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
+ */
+enum nl80211_ftm_responder_attributes {
+ __NL80211_FTM_RESP_ATTR_INVALID,
+
+ NL80211_FTM_RESP_ATTR_ENABLED,
+ NL80211_FTM_RESP_ATTR_LCI,
+ NL80211_FTM_RESP_ATTR_CIVICLOC,
+
+ /* keep last */
+ __NL80211_FTM_RESP_ATTR_LAST,
+ NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1,
+};
+
+/*
+ * enum nl80211_ftm_responder_stats - FTM responder statistics
+ *
+ * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
+ * when getting FTM responder statistics.
+ *
+ * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames
+ * were ssfully answered (u32)
+ * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the
+ * frames were successfully answered (u32)
+ * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32)
+ * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32)
+ * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32)
+ * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an
+ * indication of how much time the responder was busy (u64, msec)
+ * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers -
+ * triggers from initiators that didn't finish successfully the negotiation
+ * phase with the responder (u32)
+ * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests
+ * - initiator asks for a new scheduling although it already has scheduled
+ * FTM slot (u32)
+ * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of
+ * scheduled window (u32)
+ * @NL80211_FTM_STATS_PAD: used for padding, ignore
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
+ */
+enum nl80211_ftm_responder_stats {
+ __NL80211_FTM_STATS_INVALID,
+ NL80211_FTM_STATS_SUCCESS_NUM,
+ NL80211_FTM_STATS_PARTIAL_NUM,
+ NL80211_FTM_STATS_FAILED_NUM,
+ NL80211_FTM_STATS_ASAP_NUM,
+ NL80211_FTM_STATS_NON_ASAP_NUM,
+ NL80211_FTM_STATS_TOTAL_DURATION_MSEC,
+ NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM,
+ NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM,
+ NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM,
+ NL80211_FTM_STATS_PAD,
+
+ /* keep last */
+ __NL80211_FTM_STATS_AFTER_LAST,
+ NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_preamble - frame preamble types
+ * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble
+ * @NL80211_PREAMBLE_HT: HT preamble
+ * @NL80211_PREAMBLE_VHT: VHT preamble
+ * @NL80211_PREAMBLE_DMG: DMG preamble
+ */
+enum nl80211_preamble {
+ NL80211_PREAMBLE_LEGACY,
+ NL80211_PREAMBLE_HT,
+ NL80211_PREAMBLE_VHT,
+ NL80211_PREAMBLE_DMG,
+};
+
+/**
+ * enum nl80211_peer_measurement_type - peer measurement types
+ * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use
+ * these numbers also for attributes
+ *
+ * @NL80211_PMSR_TYPE_FTM: flight time measurement
+ *
+ * @NUM_NL80211_PMSR_TYPES: internal
+ * @NL80211_PMSR_TYPE_MAX: highest type number
+ */
+enum nl80211_peer_measurement_type {
+ NL80211_PMSR_TYPE_INVALID,
+
+ NL80211_PMSR_TYPE_FTM,
+
+ NUM_NL80211_PMSR_TYPES,
+ NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_status - peer measurement status
+ * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully
+ * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused
+ * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out
+ * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent
+ * reason may be available in the response data
+ */
+enum nl80211_peer_measurement_status {
+ NL80211_PMSR_STATUS_SUCCESS,
+ NL80211_PMSR_STATUS_REFUSED,
+ NL80211_PMSR_STATUS_TIMEOUT,
+ NL80211_PMSR_STATUS_FAILURE,
+};
+
+/**
+ * enum nl80211_peer_measurement_req - peer measurement request attributes
+ * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
+ * type-specific request data inside. The attributes used are from the
+ * enums named nl80211_peer_measurement_<type>_req.
+ * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported
+ * (flag attribute)
+ *
+ * @NUM_NL80211_PMSR_REQ_ATTRS: internal
+ * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_req {
+ __NL80211_PMSR_REQ_ATTR_INVALID,
+
+ NL80211_PMSR_REQ_ATTR_DATA,
+ NL80211_PMSR_REQ_ATTR_GET_AP_TSF,
+
+ /* keep last */
+ NUM_NL80211_PMSR_REQ_ATTRS,
+ NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_resp - peer measurement response attributes
+ * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
+ * type-specific results inside. The attributes used are from the enums
+ * named nl80211_peer_measurement_<type>_resp.
+ * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status
+ * (using values from &enum nl80211_peer_measurement_status.)
+ * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the
+ * result was measured; this value is not expected to be accurate to
+ * more than 20ms. (u64, nanoseconds)
+ * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface
+ * doing the measurement is connected to when the result was measured.
+ * This shall be accurately reported if supported and requested
+ * (u64, usec)
+ * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially
+ * (*e.g. with FTM per-burst data) this flag will be cleared on all but
+ * the last result; if all results are combined it's set on the single
+ * result.
+ * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore
+ *
+ * @NUM_NL80211_PMSR_RESP_ATTRS: internal
+ * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_resp {
+ __NL80211_PMSR_RESP_ATTR_INVALID,
+
+ NL80211_PMSR_RESP_ATTR_DATA,
+ NL80211_PMSR_RESP_ATTR_STATUS,
+ NL80211_PMSR_RESP_ATTR_HOST_TIME,
+ NL80211_PMSR_RESP_ATTR_AP_TSF,
+ NL80211_PMSR_RESP_ATTR_FINAL,
+ NL80211_PMSR_RESP_ATTR_PAD,
+
+ /* keep last */
+ NUM_NL80211_PMSR_RESP_ATTRS,
+ NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement
+ * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address
+ * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level
+ * attributes like %NL80211_ATTR_WIPHY_FREQ etc.
+ * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
+ * measurement type, with attributes from the
+ * &enum nl80211_peer_measurement_req inside.
+ * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
+ * measurement type, with attributes from the
+ * &enum nl80211_peer_measurement_resp inside.
+ *
+ * @NUM_NL80211_PMSR_PEER_ATTRS: internal
+ * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_peer_attrs {
+ __NL80211_PMSR_PEER_ATTR_INVALID,
+
+ NL80211_PMSR_PEER_ATTR_ADDR,
+ NL80211_PMSR_PEER_ATTR_CHAN,
+ NL80211_PMSR_PEER_ATTR_REQ,
+ NL80211_PMSR_PEER_ATTR_RESP,
+
+ /* keep last */
+ NUM_NL80211_PMSR_PEER_ATTRS,
+ NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1,
+};
+
+/**
+ * enum nl80211_peer_measurement_attrs - peer measurement attributes
+ * @__NL80211_PMSR_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
+ * advertisement only, indicates the maximum number of peers
+ * measurements can be done with in a single request
+ * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
+ * indicating that the connected AP's TSF can be reported in
+ * measurement results
+ * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
+ * indicating that MAC address randomization is supported.
+ * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device,
+ * this contains a nesting indexed by measurement type, and
+ * type-specific capabilities inside, which are from the enums
+ * named nl80211_peer_measurement_<type>_capa.
+ * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
+ * meaningless, just a list of peers to measure with, with the
+ * sub-attributes taken from
+ * &enum nl80211_peer_measurement_peer_attrs.
+ *
+ * @NUM_NL80211_PMSR_ATTR: internal
+ * @NL80211_PMSR_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_attrs {
+ __NL80211_PMSR_ATTR_INVALID,
+
+ NL80211_PMSR_ATTR_MAX_PEERS,
+ NL80211_PMSR_ATTR_REPORT_AP_TSF,
+ NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR,
+ NL80211_PMSR_ATTR_TYPE_CAPA,
+ NL80211_PMSR_ATTR_PEERS,
+
+ /* keep last */
+ NUM_NL80211_PMSR_ATTR,
+ NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_capa - FTM capabilities
+ * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
+ * is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
+ * mode is supported
+ * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
+ * data can be requested during the measurement
+ * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
+ * location data can be requested during the measurement
+ * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
+ * from &enum nl80211_preamble.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from
+ * &enum nl80211_chan_width indicating the supported channel
+ * bandwidths for FTM. Note that a higher channel bandwidth may be
+ * configured to allow for other measurements types with different
+ * bandwidth requirement in the same measurement.
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
+ * the maximum bursts exponent that can be used (if not present anything
+ * is valid)
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
+ * the maximum FTMs per burst (if not present anything is valid)
+ *
+ * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
+ * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_ftm_capa {
+ __NL80211_PMSR_FTM_CAPA_ATTR_INVALID,
+
+ NL80211_PMSR_FTM_CAPA_ATTR_ASAP,
+ NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP,
+ NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI,
+ NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC,
+ NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES,
+ NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
+
+ /* keep last */
+ NUM_NL80211_PMSR_FTM_CAPA_ATTR,
+ NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_req - FTM request attributes
+ * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see
+ * &enum nl80211_preamble), optional for DMG (u32)
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in
+ * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element"
+ * (u8, 0-15, optional with default 15 i.e. "no preference")
+ * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units
+ * of 100ms (u16, optional with default 0)
+ * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016
+ * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with
+ * default 15 i.e. "no preference")
+ * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames
+ * requested per burst
+ * (u8, 0-31, optional with default 0 i.e. "no preference")
+ * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries
+ * (u8, default 3)
+ * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
+ * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
+ * (flag)
+ *
+ * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
+ * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_ftm_req {
+ __NL80211_PMSR_FTM_REQ_ATTR_INVALID,
+
+ NL80211_PMSR_FTM_REQ_ATTR_ASAP,
+ NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE,
+ NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP,
+ NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD,
+ NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION,
+ NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST,
+ NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
+ NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
+ NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
+
+ /* keep last */
+ NUM_NL80211_PMSR_FTM_REQ_ATTR,
+ NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons
+ * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used
+ * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder
+ * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement
+ * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is
+ * on a different channel, so can't measure (if we didn't know, we'd
+ * try and get no response)
+ * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM
+ * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps
+ * received
+ * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry
+ * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME)
+ * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed
+ * by the peer and are no longer supported
+ */
+enum nl80211_peer_measurement_ftm_failure_reasons {
+ NL80211_PMSR_FTM_FAILURE_UNSPECIFIED,
+ NL80211_PMSR_FTM_FAILURE_NO_RESPONSE,
+ NL80211_PMSR_FTM_FAILURE_REJECTED,
+ NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL,
+ NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE,
+ NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP,
+ NL80211_PMSR_FTM_FAILURE_PEER_BUSY,
+ NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS,
+};
+
+/**
+ * enum nl80211_peer_measurement_ftm_resp - FTM response attributes
+ * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid
+ *
+ * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason
+ * (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported
+ * as separate results then it will be the burst index 0...(N-1) and
+ * the top level will indicate partial results (u32)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
+ * transmitted (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
+ * that were acknowleged (u32, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
+ * busy peer (u32, seconds)
+ * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
+ * used by the responder (similar to request, u8)
+ * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by
+ * the responder (similar to request, u8)
+ * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used
+ * by the responder (similar to request, u8)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action
+ * frames (optional, s32, 1/2 dBm)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action
+ * frames (optional, s32, 1/2 dBm)
+ * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the
+ * FTM action frame (optional, nested, using &enum nl80211_rate_info
+ * attributes)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM
+ * action frame (optional, nested, using &enum nl80211_rate_info attrs)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional
+ * but one of RTT/DIST must be present)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that
+ * standard deviation is the square root of variance, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds,
+ * optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional
+ * but one of RTT/DIST must be present)
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note
+ * that standard deviation is the square root of variance, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional)
+ * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional);
+ * this is the contents of the Measurement Report Element (802.11-2016
+ * 9.4.2.22.1) starting with the Measurement Token, with Measurement
+ * Type 8.
+ * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer
+ * (binary, optional);
+ * this is the contents of the Measurement Report Element (802.11-2016
+ * 9.4.2.22.1) starting with the Measurement Token, with Measurement
+ * Type 11.
+ * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only
+ *
+ * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal
+ * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
+ */
+enum nl80211_peer_measurement_ftm_resp {
+ __NL80211_PMSR_FTM_RESP_ATTR_INVALID,
+
+ NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON,
+ NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES,
+ NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME,
+ NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP,
+ NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION,
+ NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST,
+ NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG,
+ NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD,
+ NL80211_PMSR_FTM_RESP_ATTR_TX_RATE,
+ NL80211_PMSR_FTM_RESP_ATTR_RX_RATE,
+ NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG,
+ NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE,
+ NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD,
+ NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG,
+ NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE,
+ NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD,
+ NL80211_PMSR_FTM_RESP_ATTR_LCI,
+ NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC,
+ NL80211_PMSR_FTM_RESP_ATTR_PAD,
+
+ /* keep last */
+ NUM_NL80211_PMSR_FTM_RESP_ATTR,
+ NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1
+};
+
+/**
+ * enum nl80211_obss_pd_attributes - OBSS packet detection attributes
+ * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid
+ *
+ * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ *
+ * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
+ * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
+ */
+enum nl80211_obss_pd_attributes {
+ __NL80211_HE_OBSS_PD_ATTR_INVALID,
+
+ NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+
+ /* keep last */
+ __NL80211_HE_OBSS_PD_ATTR_LAST,
+ NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
+};
+
+
#endif /* __LINUX_NL80211_H */