Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/include/linux/clk/analogbits-wrpll-cln28hpc.h b/include/linux/clk/analogbits-wrpll-cln28hpc.h
new file mode 100644
index 0000000..0327909
--- /dev/null
+++ b/include/linux/clk/analogbits-wrpll-cln28hpc.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ */
+
+#ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
+#define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
+
+#include <linux/types.h>
+
+/* DIVQ_VALUES: number of valid DIVQ values */
+#define DIVQ_VALUES 6
+
+/*
+ * Bit definitions for struct wrpll_cfg.flags
+ *
+ * WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be
+ * programmed to enter bypass
+ * WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset
+ * WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal
+ * feedback mode
+ * WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external
+ * feedback mode (not yet supported by this driver)
+ */
+#define WRPLL_FLAGS_BYPASS_SHIFT 0
+#define WRPLL_FLAGS_BYPASS_MASK BIT(WRPLL_FLAGS_BYPASS_SHIFT)
+#define WRPLL_FLAGS_RESET_SHIFT 1
+#define WRPLL_FLAGS_RESET_MASK BIT(WRPLL_FLAGS_RESET_SHIFT)
+#define WRPLL_FLAGS_INT_FEEDBACK_SHIFT 2
+#define WRPLL_FLAGS_INT_FEEDBACK_MASK BIT(WRPLL_FLAGS_INT_FEEDBACK_SHIFT)
+#define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT 3
+#define WRPLL_FLAGS_EXT_FEEDBACK_MASK BIT(WRPLL_FLAGS_EXT_FEEDBACK_SHIFT)
+
+/**
+ * struct wrpll_cfg - WRPLL configuration values
+ * @divr: reference divider value (6 bits), as presented to the PLL signals
+ * @divf: feedback divider value (9 bits), as presented to the PLL signals
+ * @divq: output divider value (3 bits), as presented to the PLL signals
+ * @flags: PLL configuration flags. See above for more information
+ * @range: PLL loop filter range. See below for more information
+ * @output_rate_cache: cached output rates, swept across DIVQ
+ * @parent_rate: PLL refclk rate for which values are valid
+ * @max_r: maximum possible R divider value, given @parent_rate
+ * @init_r: initial R divider value to start the search from
+ *
+ * @divr, @divq, @divq, @range represent what the PLL expects to see
+ * on its input signals. Thus @divr and @divf are the actual divisors
+ * minus one. @divq is a power-of-two divider; for example, 1 =
+ * divide-by-2 and 6 = divide-by-64. 0 is an invalid @divq value.
+ *
+ * When initially passing a struct wrpll_cfg record, the
+ * record should be zero-initialized with the exception of the @flags
+ * field. The only flag bits that need to be set are either
+ * WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK.
+ */
+struct wrpll_cfg {
+ u8 divr;
+ u8 divq;
+ u8 range;
+ u8 flags;
+ u16 divf;
+/* private: */
+ u32 output_rate_cache[DIVQ_VALUES];
+ unsigned long parent_rate;
+ u8 max_r;
+ u8 init_r;
+};
+
+int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate,
+ unsigned long parent_rate);
+
+unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c);
+
+unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c,
+ unsigned long parent_rate);
+
+#endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
index 931ab05..3904378 100644
--- a/include/linux/clk/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* include/linux/clk/at91_pmc.h
*
@@ -6,11 +7,6 @@
*
* Power Management Controller (PMC) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef AT91_PMC_H
@@ -74,6 +70,8 @@
#define AT91_PMC_USBDIV_4 (2 << 28)
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+#define AT91_PMC_CPU_CKR 0x28 /* CPU Clock Register */
+
#define AT91_PMC_MCKR 0x30 /* Master Clock Register */
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
#define AT91_PMC_CSS_SLOW (0 << 0)
@@ -159,6 +157,7 @@
#define AT91_PMC_FSMR 0x70 /* Fast Startup Mode Register */
#define AT91_PMC_FSTT(n) BIT(n)
+#define AT91_PMC_RTTAL BIT(16)
#define AT91_PMC_RTCAL BIT(17) /* RTC Alarm Enable */
#define AT91_PMC_USBAL BIT(18) /* USB Resume Enable */
#define AT91_PMC_SDMMC_CD BIT(19) /* SDMMC Card Detect Enable */
@@ -187,16 +186,8 @@
#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */
#define AT91_PMC_PCR_PID_MASK 0x3f
-#define AT91_PMC_PCR_GCKCSS_OFFSET 8
-#define AT91_PMC_PCR_GCKCSS_MASK (0x7 << AT91_PMC_PCR_GCKCSS_OFFSET)
-#define AT91_PMC_PCR_GCKCSS(n) ((n) << AT91_PMC_PCR_GCKCSS_OFFSET) /* GCK Clock Source Selection */
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
-#define AT91_PMC_PCR_DIV_OFFSET 16
-#define AT91_PMC_PCR_DIV_MASK (0x3 << AT91_PMC_PCR_DIV_OFFSET)
-#define AT91_PMC_PCR_DIV(n) ((n) << AT91_PMC_PCR_DIV_OFFSET) /* Divisor Value */
-#define AT91_PMC_PCR_GCKDIV_OFFSET 20
-#define AT91_PMC_PCR_GCKDIV_MASK (0xff << AT91_PMC_PCR_GCKDIV_OFFSET)
-#define AT91_PMC_PCR_GCKDIV(n) ((n) << AT91_PMC_PCR_GCKDIV_OFFSET) /* Generated Clock Divisor Value */
+#define AT91_PMC_PCR_GCKDIV_MASK GENMASK(27, 20)
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#define AT91_PMC_PCR_GCKEN (0x1 << 29) /* GCK Enable */
diff --git a/include/linux/clk/clk-conf.h b/include/linux/clk/clk-conf.h
index e0c3623..eae9652 100644
--- a/include/linux/clk/clk-conf.h
+++ b/include/linux/clk/clk-conf.h
@@ -1,12 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2014 Samsung Electronics Co., Ltd.
* Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
+#ifndef __CLK_CONF_H
+#define __CLK_CONF_H
+
#include <linux/types.h>
struct device_node;
@@ -20,3 +20,5 @@
return 0;
}
#endif
+
+#endif /* __CLK_CONF_H */
diff --git a/include/linux/clk/mxs.h b/include/linux/clk/mxs.h
index 5138a90..2674e60 100644
--- a/include/linux/clk/mxs.h
+++ b/include/linux/clk/mxs.h
@@ -1,9 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __LINUX_CLK_MXS_H
diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
index 9ebf1f8..0ebbe2f 100644
--- a/include/linux/clk/renesas.h
+++ b/include/linux/clk/renesas.h
@@ -1,14 +1,10 @@
-/*
+/* SPDX-License-Identifier: GPL-2.0+
+ *
* Copyright 2013 Ideas On Board SPRL
* Copyright 2013, 2014 Horms Solutions Ltd.
*
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* Contact: Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef __LINUX_CLK_RENESAS_H_
diff --git a/include/linux/clk/sunxi-ng.h b/include/linux/clk/sunxi-ng.h
index 990f760..3cd14ac 100644
--- a/include/linux/clk/sunxi-ng.h
+++ b/include/linux/clk/sunxi-ng.h
@@ -1,14 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2017 Chen-Yu Tsai. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#ifndef _LINUX_CLK_SUNXI_NG_H_
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h
index afb9edf..b8aef62 100644
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -1,17 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __LINUX_CLK_TEGRA_H_
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a8faa38..1e8ef96 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -159,6 +159,8 @@
const char *clkdm_name;
struct clockdomain *clkdm;
const struct clk_hw_omap_ops *ops;
+ u32 context;
+ int autoidle_count;
};
/*
@@ -241,6 +243,7 @@
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+bool omap2_clk_is_hw_omap(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
@@ -290,9 +293,16 @@
#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
#define TI_CLK_ERRATA_I810 BIT(3)
+#define TI_CLK_CLKCTRL_COMPAT BIT(4)
+#define TI_CLK_DEVICE_TYPE_GP BIT(5)
void ti_clk_setup_features(struct ti_clk_features *features);
const struct ti_clk_features *ti_clk_get_features(void);
+int omap3_noncore_dpll_save_context(struct clk_hw *hw);
+void omap3_noncore_dpll_restore_context(struct clk_hw *hw);
+
+int omap3_core_dpll_save_context(struct clk_hw *hw);
+void omap3_core_dpll_restore_context(struct clk_hw *hw);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h
index 7a5633b..a198dd9 100644
--- a/include/linux/clk/zynq.h
+++ b/include/linux/clk/zynq.h
@@ -1,20 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2013 Xilinx Inc.
* Copyright (C) 2012 National Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __LINUX_CLK_ZYNQ_H_