Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index a6efb9a..6ca9111 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -12,6 +12,7 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/nls.h>
@@ -222,11 +223,51 @@
.product_str = "USB2517i",
};
+#ifdef CONFIG_GPIOLIB
+static int usb251xb_check_dev_children(struct device *dev, void *child)
+{
+ if (dev->type == &i2c_adapter_type) {
+ return device_for_each_child(dev, child,
+ usb251xb_check_dev_children);
+ }
+
+ return (dev == child);
+}
+
+static int usb251x_check_gpio_chip(struct usb251xb *hub)
+{
+ struct gpio_chip *gc = gpiod_to_chip(hub->gpio_reset);
+ struct i2c_adapter *adap = hub->i2c->adapter;
+ int ret;
+
+ if (!hub->gpio_reset)
+ return 0;
+
+ if (!gc)
+ return -EINVAL;
+
+ ret = usb251xb_check_dev_children(&adap->dev, gc->parent);
+ if (ret) {
+ dev_err(hub->dev, "Reset GPIO chip is at the same i2c-bus\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+static int usb251x_check_gpio_chip(struct usb251xb *hub)
+{
+ return 0;
+}
+#endif
+
static void usb251xb_reset(struct usb251xb *hub, int state)
{
if (!hub->gpio_reset)
return;
+ i2c_lock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
+
gpiod_set_value_cansleep(hub->gpio_reset, state);
/* wait for hub recovery/stabilization */
@@ -234,6 +275,8 @@
usleep_range(500, 750); /* >=500us at power on */
else
usleep_range(1, 10); /* >=1us at power down */
+
+ i2c_unlock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
}
static int usb251xb_connect(struct usb251xb *hub)
@@ -331,14 +374,30 @@
}
#ifdef CONFIG_OF
+static void usb251xb_get_ports_field(struct usb251xb *hub,
+ const char *prop_name, u8 port_cnt,
+ bool ds_only, u8 *fld)
+{
+ struct device *dev = hub->dev;
+ struct property *prop;
+ const __be32 *p;
+ u32 port;
+
+ of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) {
+ if ((port >= ds_only ? 1 : 0) && (port <= port_cnt))
+ *fld |= BIT(port);
+ else
+ dev_warn(dev, "port %u doesn't exist\n", port);
+ }
+}
+
static int usb251xb_get_ofdata(struct usb251xb *hub,
struct usb251xb_data *data)
{
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
- int len, err, i;
+ int len, err;
u32 property_u32 = 0;
- const u32 *cproperty_u32;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
@@ -442,46 +501,16 @@
hub->conf_data3 |= BIT(0);
hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES;
- cproperty_u32 = of_get_property(np, "non-removable-ports", &len);
- if (cproperty_u32 && (len / sizeof(u32)) > 0) {
- for (i = 0; i < len / sizeof(u32); i++) {
- u32 port = be32_to_cpu(cproperty_u32[i]);
-
- if ((port >= 1) && (port <= data->port_cnt))
- hub->non_rem_dev |= BIT(port);
- else
- dev_warn(dev, "NRD port %u doesn't exist\n",
- port);
- }
- }
+ usb251xb_get_ports_field(hub, "non-removable-ports", data->port_cnt,
+ true, &hub->non_rem_dev);
hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF;
- cproperty_u32 = of_get_property(np, "sp-disabled-ports", &len);
- if (cproperty_u32 && (len / sizeof(u32)) > 0) {
- for (i = 0; i < len / sizeof(u32); i++) {
- u32 port = be32_to_cpu(cproperty_u32[i]);
-
- if ((port >= 1) && (port <= data->port_cnt))
- hub->port_disable_sp |= BIT(port);
- else
- dev_warn(dev, "PDS port %u doesn't exist\n",
- port);
- }
- }
+ usb251xb_get_ports_field(hub, "sp-disabled-ports", data->port_cnt,
+ true, &hub->port_disable_sp);
hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS;
- cproperty_u32 = of_get_property(np, "bp-disabled-ports", &len);
- if (cproperty_u32 && (len / sizeof(u32)) > 0) {
- for (i = 0; i < len / sizeof(u32); i++) {
- u32 port = be32_to_cpu(cproperty_u32[i]);
-
- if ((port >= 1) && (port <= data->port_cnt))
- hub->port_disable_bp |= BIT(port);
- else
- dev_warn(dev, "PDB port %u doesn't exist\n",
- port);
- }
- }
+ usb251xb_get_ports_field(hub, "bp-disabled-ports", data->port_cnt,
+ true, &hub->port_disable_bp);
hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
if (!of_property_read_u32(np, "sp-max-total-current-microamp",
@@ -539,6 +568,14 @@
(wchar_t *)hub->serial,
USB251XB_STRING_BUFSIZE);
+ /*
+ * The datasheet documents the register as 'Port Swap' but in real the
+ * register controls the USB DP/DM signal swapping for each port.
+ */
+ hub->port_swap = USB251XB_DEF_PORT_SWAP;
+ usb251xb_get_ports_field(hub, "swap-dx-lanes", data->port_cnt,
+ false, &hub->port_swap);
+
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
*/
@@ -546,7 +583,6 @@
hub->boost_up = USB251XB_DEF_BOOST_UP;
hub->boost_57 = USB251XB_DEF_BOOST_57;
hub->boost_14 = USB251XB_DEF_BOOST_14;
- hub->port_swap = USB251XB_DEF_PORT_SWAP;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
@@ -601,7 +637,7 @@
dev);
int err;
- if (np) {
+ if (np && of_id) {
err = usb251xb_get_ofdata(hub,
(struct usb251xb_data *)of_id->data);
if (err) {
@@ -610,6 +646,25 @@
}
}
+ /*
+ * usb251x SMBus-slave SCL lane is muxed with CFG_SEL0 pin. So if anyone
+ * tries to work with the bus at the moment the hub reset is released,
+ * it may cause an invalid config being latched by usb251x. Particularly
+ * one of the config modes makes the hub loading a default registers
+ * value without SMBus-slave interface activation. If the hub
+ * accidentally gets this mode, this will cause the driver SMBus-
+ * functions failure. Normally we could just lock the SMBus-segment the
+ * hub i2c-interface resides for the device-specific reset timing. But
+ * the GPIO controller, which is used to handle the hub reset, might be
+ * placed at the same i2c-bus segment. In this case an error should be
+ * returned since we can't safely use the GPIO controller to clear the
+ * reset state (it may affect the hub configuration) and we can't lock
+ * the i2c-bus segment (it will cause a deadlock).
+ */
+ err = usb251x_check_gpio_chip(hub);
+ if (err)
+ return err;
+
err = usb251xb_connect(hub);
if (err) {
dev_err(dev, "Failed to connect hub (%d)\n", err);