diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index cda1071..255786f 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Simple synchronous userspace interface to SPI devices
  *
  * Copyright (C) 2006 SWAPP
  *	Andrea Paterniani <a.paterniani@swapp-eng.it>
  * Copyright (C) 2007 David Brownell (simplification, cleanup)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/init.h>
@@ -276,17 +267,19 @@
 		k_tmp->bits_per_word = u_tmp->bits_per_word;
 		k_tmp->delay_usecs = u_tmp->delay_usecs;
 		k_tmp->speed_hz = u_tmp->speed_hz;
+		k_tmp->word_delay_usecs = u_tmp->word_delay_usecs;
 		if (!k_tmp->speed_hz)
 			k_tmp->speed_hz = spidev->speed_hz;
 #ifdef VERBOSE
 		dev_dbg(&spidev->spi->dev,
-			"  xfer len %u %s%s%s%dbits %u usec %uHz\n",
+			"  xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n",
 			u_tmp->len,
 			u_tmp->rx_buf ? "rx " : "",
 			u_tmp->tx_buf ? "tx " : "",
 			u_tmp->cs_change ? "cs " : "",
 			u_tmp->bits_per_word ? : spidev->spi->bits_per_word,
 			u_tmp->delay_usecs,
+			u_tmp->word_delay_usecs,
 			u_tmp->speed_hz ? : spidev->spi->max_speed_hz);
 #endif
 		spi_message_add_tail(k_tmp, &msg);
@@ -591,7 +584,7 @@
 
 	spidev->users++;
 	filp->private_data = spidev;
-	nonseekable_open(inode, filp);
+	stream_open(inode, filp);
 
 	mutex_unlock(&device_list_lock);
 	return 0;
@@ -669,6 +662,9 @@
 	{ .compatible = "lineartechnology,ltc2488" },
 	{ .compatible = "ge,achc" },
 	{ .compatible = "semtech,sx1301" },
+	{ .compatible = "lwn,bk4" },
+	{ .compatible = "dh,dhcom-board" },
+	{ .compatible = "menlo,m53cpld" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, spidev_dt_ids);
@@ -724,11 +720,9 @@
 	 * compatible string, it is a Linux implementation thing
 	 * rather than a description of the hardware.
 	 */
-	if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) {
-		dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n");
-		WARN_ON(spi->dev.of_node &&
-			!of_match_device(spidev_dt_ids, &spi->dev));
-	}
+	WARN(spi->dev.of_node &&
+	     of_device_is_compatible(spi->dev.of_node, "spidev"),
+	     "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node);
 
 	spidev_probe_acpi(spi);