Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig
new file mode 100644
index 0000000..323e177
--- /dev/null
+++ b/drivers/soc/aspeed/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Aspeed SoC drivers"
+
+config SOC_ASPEED
+ def_bool y
+ depends on ARCH_ASPEED || COMPILE_TEST
+
+config ASPEED_LPC_CTRL
+ depends on SOC_ASPEED && REGMAP && MFD_SYSCON
+ tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
+ ---help---
+ Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
+ ioctl()s, the driver also provides a read/write interface to a BMC ram
+ region where the host LPC read/write region can be buffered.
+
+config ASPEED_LPC_SNOOP
+ tristate "Aspeed ast2500 HOST LPC snoop support"
+ depends on SOC_ASPEED && REGMAP && MFD_SYSCON
+ help
+ Provides a driver to control the LPC snoop interface which
+ allows the BMC to listen on and save the data written by
+ the host to an arbitrary LPC I/O port.
+
+config ASPEED_P2A_CTRL
+ depends on SOC_ASPEED && REGMAP && MFD_SYSCON
+ tristate "Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC bridge control"
+ help
+ Control Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC mappings through
+ ioctl()s, the driver also provides an interface for userspace mappings to
+ a pre-defined region.
+
+endmenu
diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile
new file mode 100644
index 0000000..b64be47
--- /dev/null
+++ b/drivers/soc/aspeed/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
+obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
+obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
new file mode 100644
index 0000000..01ed21e
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+
+#include <linux/aspeed-lpc-ctrl.h>
+
+#define DEVICE_NAME "aspeed-lpc-ctrl"
+
+#define HICR5 0x0
+#define HICR5_ENL2H BIT(8)
+#define HICR5_ENFWH BIT(10)
+
+#define HICR7 0x8
+#define HICR8 0xc
+
+struct aspeed_lpc_ctrl {
+ struct miscdevice miscdev;
+ struct regmap *regmap;
+ struct clk *clk;
+ phys_addr_t mem_base;
+ resource_size_t mem_size;
+ u32 pnor_size;
+ u32 pnor_base;
+};
+
+static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
+{
+ return container_of(file->private_data, struct aspeed_lpc_ctrl,
+ miscdev);
+}
+
+static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+ unsigned long vsize = vma->vm_end - vma->vm_start;
+ pgprot_t prot = vma->vm_page_prot;
+
+ if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size)
+ return -EINVAL;
+
+ /* ast2400/2500 AHB accesses are not cache coherent */
+ prot = pgprot_noncached(prot);
+
+ if (remap_pfn_range(vma, vma->vm_start,
+ (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
+ vsize, prot))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
+ unsigned long param)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+ struct device *dev = file->private_data;
+ void __user *p = (void __user *)param;
+ struct aspeed_lpc_ctrl_mapping map;
+ u32 addr;
+ u32 size;
+ long rc;
+
+ if (copy_from_user(&map, p, sizeof(map)))
+ return -EFAULT;
+
+ if (map.flags != 0)
+ return -EINVAL;
+
+ switch (cmd) {
+ case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
+ /* The flash windows don't report their size */
+ if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
+ return -EINVAL;
+
+ /* Support more than one window id in the future */
+ if (map.window_id != 0)
+ return -EINVAL;
+
+ /* If memory-region is not described in device tree */
+ if (!lpc_ctrl->mem_size) {
+ dev_dbg(dev, "Didn't find reserved memory\n");
+ return -ENXIO;
+ }
+
+ map.size = lpc_ctrl->mem_size;
+
+ return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
+ case ASPEED_LPC_CTRL_IOCTL_MAP:
+
+ /*
+ * The top half of HICR7 is the MSB of the BMC address of the
+ * mapping.
+ * The bottom half of HICR7 is the MSB of the HOST LPC
+ * firmware space address of the mapping.
+ *
+ * The 1 bits in the top of half of HICR8 represent the bits
+ * (in the requested address) that should be ignored and
+ * replaced with those from the top half of HICR7.
+ * The 1 bits in the bottom half of HICR8 represent the bits
+ * (in the requested address) that should be kept and pass
+ * into the BMC address space.
+ */
+
+ /*
+ * It doesn't make sense to talk about a size or offset with
+ * low 16 bits set. Both HICR7 and HICR8 talk about the top 16
+ * bits of addresses and sizes.
+ */
+
+ if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
+ return -EINVAL;
+
+ /*
+ * Because of the way the masks work in HICR8 offset has to
+ * be a multiple of size.
+ */
+ if (map.offset & (map.size - 1))
+ return -EINVAL;
+
+ if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
+ if (!lpc_ctrl->pnor_size) {
+ dev_dbg(dev, "Didn't find host pnor flash\n");
+ return -ENXIO;
+ }
+ addr = lpc_ctrl->pnor_base;
+ size = lpc_ctrl->pnor_size;
+ } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
+ /* If memory-region is not described in device tree */
+ if (!lpc_ctrl->mem_size) {
+ dev_dbg(dev, "Didn't find reserved memory\n");
+ return -ENXIO;
+ }
+ addr = lpc_ctrl->mem_base;
+ size = lpc_ctrl->mem_size;
+ } else {
+ return -EINVAL;
+ }
+
+ /* Check overflow first! */
+ if (map.offset + map.size < map.offset ||
+ map.offset + map.size > size)
+ return -EINVAL;
+
+ if (map.size == 0 || map.size > size)
+ return -EINVAL;
+
+ addr += map.offset;
+
+ /*
+ * addr (host lpc address) is safe regardless of values. This
+ * simply changes the address the host has to request on its
+ * side of the LPC bus. This cannot impact the hosts own
+ * memory space by surprise as LPC specific accessors are
+ * required. The only strange thing that could be done is
+ * setting the lower 16 bits but the shift takes care of that.
+ */
+
+ rc = regmap_write(lpc_ctrl->regmap, HICR7,
+ (addr | (map.addr >> 16)));
+ if (rc)
+ return rc;
+
+ rc = regmap_write(lpc_ctrl->regmap, HICR8,
+ (~(map.size - 1)) | ((map.size >> 16) - 1));
+ if (rc)
+ return rc;
+
+ /*
+ * Enable LPC FHW cycles. This is required for the host to
+ * access the regions specified.
+ */
+ return regmap_update_bits(lpc_ctrl->regmap, HICR5,
+ HICR5_ENFWH | HICR5_ENL2H,
+ HICR5_ENFWH | HICR5_ENL2H);
+ }
+
+ return -EINVAL;
+}
+
+static const struct file_operations aspeed_lpc_ctrl_fops = {
+ .owner = THIS_MODULE,
+ .mmap = aspeed_lpc_ctrl_mmap,
+ .unlocked_ioctl = aspeed_lpc_ctrl_ioctl,
+};
+
+static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl;
+ struct device_node *node;
+ struct resource resm;
+ struct device *dev;
+ int rc;
+
+ dev = &pdev->dev;
+
+ lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
+ if (!lpc_ctrl)
+ return -ENOMEM;
+
+ /* If flash is described in device tree then store */
+ node = of_parse_phandle(dev->of_node, "flash", 0);
+ if (!node) {
+ dev_dbg(dev, "Didn't find host pnor flash node\n");
+ } else {
+ rc = of_address_to_resource(node, 1, &resm);
+ of_node_put(node);
+ if (rc) {
+ dev_err(dev, "Couldn't address to resource for flash\n");
+ return rc;
+ }
+
+ lpc_ctrl->pnor_size = resource_size(&resm);
+ lpc_ctrl->pnor_base = resm.start;
+ }
+
+
+ dev_set_drvdata(&pdev->dev, lpc_ctrl);
+
+ /* If memory-region is described in device tree then store */
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (!node) {
+ dev_dbg(dev, "Didn't find reserved memory\n");
+ } else {
+ rc = of_address_to_resource(node, 0, &resm);
+ of_node_put(node);
+ if (rc) {
+ dev_err(dev, "Couldn't address to resource for reserved memory\n");
+ return -ENXIO;
+ }
+
+ lpc_ctrl->mem_size = resource_size(&resm);
+ lpc_ctrl->mem_base = resm.start;
+ }
+
+ lpc_ctrl->regmap = syscon_node_to_regmap(
+ pdev->dev.parent->of_node);
+ if (IS_ERR(lpc_ctrl->regmap)) {
+ dev_err(dev, "Couldn't get regmap\n");
+ return -ENODEV;
+ }
+
+ lpc_ctrl->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(lpc_ctrl->clk)) {
+ dev_err(dev, "couldn't get clock\n");
+ return PTR_ERR(lpc_ctrl->clk);
+ }
+ rc = clk_prepare_enable(lpc_ctrl->clk);
+ if (rc) {
+ dev_err(dev, "couldn't enable clock\n");
+ return rc;
+ }
+
+ lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
+ lpc_ctrl->miscdev.name = DEVICE_NAME;
+ lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
+ lpc_ctrl->miscdev.parent = dev;
+ rc = misc_register(&lpc_ctrl->miscdev);
+ if (rc) {
+ dev_err(dev, "Unable to register device\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_disable_unprepare(lpc_ctrl->clk);
+ return rc;
+}
+
+static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
+
+ misc_deregister(&lpc_ctrl->miscdev);
+ clk_disable_unprepare(lpc_ctrl->clk);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_lpc_ctrl_match[] = {
+ { .compatible = "aspeed,ast2400-lpc-ctrl" },
+ { .compatible = "aspeed,ast2500-lpc-ctrl" },
+ { },
+};
+
+static struct platform_driver aspeed_lpc_ctrl_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_lpc_ctrl_match,
+ },
+ .probe = aspeed_lpc_ctrl_probe,
+ .remove = aspeed_lpc_ctrl_remove,
+};
+
+module_platform_driver(aspeed_lpc_ctrl_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
+MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings");
diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
new file mode 100644
index 0000000..48f7ac2
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 Google Inc
+ *
+ * Provides a simple driver to control the ASPEED LPC snoop interface which
+ * allows the BMC to listen on and save the data written by
+ * the host to an arbitrary LPC I/O port.
+ *
+ * Typically used by the BMC to "watch" host boot progress via port
+ * 0x80 writes made by the BIOS during the boot process.
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/kfifo.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+
+#define DEVICE_NAME "aspeed-lpc-snoop"
+
+#define NUM_SNOOP_CHANNELS 2
+#define SNOOP_FIFO_SIZE 2048
+
+#define HICR5 0x0
+#define HICR5_EN_SNP0W BIT(0)
+#define HICR5_ENINT_SNP0W BIT(1)
+#define HICR5_EN_SNP1W BIT(2)
+#define HICR5_ENINT_SNP1W BIT(3)
+
+#define HICR6 0x4
+#define HICR6_STR_SNP0W BIT(0)
+#define HICR6_STR_SNP1W BIT(1)
+#define SNPWADR 0x10
+#define SNPWADR_CH0_MASK GENMASK(15, 0)
+#define SNPWADR_CH0_SHIFT 0
+#define SNPWADR_CH1_MASK GENMASK(31, 16)
+#define SNPWADR_CH1_SHIFT 16
+#define SNPWDR 0x14
+#define SNPWDR_CH0_MASK GENMASK(7, 0)
+#define SNPWDR_CH0_SHIFT 0
+#define SNPWDR_CH1_MASK GENMASK(15, 8)
+#define SNPWDR_CH1_SHIFT 8
+#define HICRB 0x80
+#define HICRB_ENSNP0D BIT(14)
+#define HICRB_ENSNP1D BIT(15)
+
+struct aspeed_lpc_snoop_model_data {
+ /* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500
+ * can use them.
+ */
+ unsigned int has_hicrb_ensnp;
+};
+
+struct aspeed_lpc_snoop_channel {
+ struct kfifo fifo;
+ wait_queue_head_t wq;
+ struct miscdevice miscdev;
+};
+
+struct aspeed_lpc_snoop {
+ struct regmap *regmap;
+ int irq;
+ struct aspeed_lpc_snoop_channel chan[NUM_SNOOP_CHANNELS];
+};
+
+static struct aspeed_lpc_snoop_channel *snoop_file_to_chan(struct file *file)
+{
+ return container_of(file->private_data,
+ struct aspeed_lpc_snoop_channel,
+ miscdev);
+}
+
+static ssize_t snoop_file_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
+ unsigned int copied;
+ int ret = 0;
+
+ if (kfifo_is_empty(&chan->fifo)) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ ret = wait_event_interruptible(chan->wq,
+ !kfifo_is_empty(&chan->fifo));
+ if (ret == -ERESTARTSYS)
+ return -EINTR;
+ }
+ ret = kfifo_to_user(&chan->fifo, buffer, count, &copied);
+
+ return ret ? ret : copied;
+}
+
+static unsigned int snoop_file_poll(struct file *file,
+ struct poll_table_struct *pt)
+{
+ struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
+
+ poll_wait(file, &chan->wq, pt);
+ return !kfifo_is_empty(&chan->fifo) ? POLLIN : 0;
+}
+
+static const struct file_operations snoop_fops = {
+ .owner = THIS_MODULE,
+ .read = snoop_file_read,
+ .poll = snoop_file_poll,
+ .llseek = noop_llseek,
+};
+
+/* Save a byte to a FIFO and discard the oldest byte if FIFO is full */
+static void put_fifo_with_discard(struct aspeed_lpc_snoop_channel *chan, u8 val)
+{
+ if (!kfifo_initialized(&chan->fifo))
+ return;
+ if (kfifo_is_full(&chan->fifo))
+ kfifo_skip(&chan->fifo);
+ kfifo_put(&chan->fifo, val);
+ wake_up_interruptible(&chan->wq);
+}
+
+static irqreturn_t aspeed_lpc_snoop_irq(int irq, void *arg)
+{
+ struct aspeed_lpc_snoop *lpc_snoop = arg;
+ u32 reg, data;
+
+ if (regmap_read(lpc_snoop->regmap, HICR6, ®))
+ return IRQ_NONE;
+
+ /* Check if one of the snoop channels is interrupting */
+ reg &= (HICR6_STR_SNP0W | HICR6_STR_SNP1W);
+ if (!reg)
+ return IRQ_NONE;
+
+ /* Ack pending IRQs */
+ regmap_write(lpc_snoop->regmap, HICR6, reg);
+
+ /* Read and save most recent snoop'ed data byte to FIFO */
+ regmap_read(lpc_snoop->regmap, SNPWDR, &data);
+
+ if (reg & HICR6_STR_SNP0W) {
+ u8 val = (data & SNPWDR_CH0_MASK) >> SNPWDR_CH0_SHIFT;
+
+ put_fifo_with_discard(&lpc_snoop->chan[0], val);
+ }
+ if (reg & HICR6_STR_SNP1W) {
+ u8 val = (data & SNPWDR_CH1_MASK) >> SNPWDR_CH1_SHIFT;
+
+ put_fifo_with_discard(&lpc_snoop->chan[1], val);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int rc;
+
+ lpc_snoop->irq = platform_get_irq(pdev, 0);
+ if (!lpc_snoop->irq)
+ return -ENODEV;
+
+ rc = devm_request_irq(dev, lpc_snoop->irq,
+ aspeed_lpc_snoop_irq, IRQF_SHARED,
+ DEVICE_NAME, lpc_snoop);
+ if (rc < 0) {
+ dev_warn(dev, "Unable to request IRQ %d\n", lpc_snoop->irq);
+ lpc_snoop->irq = 0;
+ return rc;
+ }
+
+ return 0;
+}
+
+static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
+ struct device *dev,
+ int channel, u16 lpc_port)
+{
+ int rc = 0;
+ u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en;
+ const struct aspeed_lpc_snoop_model_data *model_data =
+ of_device_get_match_data(dev);
+
+ init_waitqueue_head(&lpc_snoop->chan[channel].wq);
+ /* Create FIFO datastructure */
+ rc = kfifo_alloc(&lpc_snoop->chan[channel].fifo,
+ SNOOP_FIFO_SIZE, GFP_KERNEL);
+ if (rc)
+ return rc;
+
+ lpc_snoop->chan[channel].miscdev.minor = MISC_DYNAMIC_MINOR;
+ lpc_snoop->chan[channel].miscdev.name =
+ devm_kasprintf(dev, GFP_KERNEL, "%s%d", DEVICE_NAME, channel);
+ lpc_snoop->chan[channel].miscdev.fops = &snoop_fops;
+ lpc_snoop->chan[channel].miscdev.parent = dev;
+ rc = misc_register(&lpc_snoop->chan[channel].miscdev);
+ if (rc)
+ return rc;
+
+ /* Enable LPC snoop channel at requested port */
+ switch (channel) {
+ case 0:
+ hicr5_en = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W;
+ snpwadr_mask = SNPWADR_CH0_MASK;
+ snpwadr_shift = SNPWADR_CH0_SHIFT;
+ hicrb_en = HICRB_ENSNP0D;
+ break;
+ case 1:
+ hicr5_en = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W;
+ snpwadr_mask = SNPWADR_CH1_MASK;
+ snpwadr_shift = SNPWADR_CH1_SHIFT;
+ hicrb_en = HICRB_ENSNP1D;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
+ regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
+ lpc_port << snpwadr_shift);
+ if (model_data->has_hicrb_ensnp)
+ regmap_update_bits(lpc_snoop->regmap, HICRB,
+ hicrb_en, hicrb_en);
+
+ return rc;
+}
+
+static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
+ int channel)
+{
+ switch (channel) {
+ case 0:
+ regmap_update_bits(lpc_snoop->regmap, HICR5,
+ HICR5_EN_SNP0W | HICR5_ENINT_SNP0W,
+ 0);
+ break;
+ case 1:
+ regmap_update_bits(lpc_snoop->regmap, HICR5,
+ HICR5_EN_SNP1W | HICR5_ENINT_SNP1W,
+ 0);
+ break;
+ default:
+ return;
+ }
+
+ kfifo_free(&lpc_snoop->chan[channel].fifo);
+ misc_deregister(&lpc_snoop->chan[channel].miscdev);
+}
+
+static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
+{
+ struct aspeed_lpc_snoop *lpc_snoop;
+ struct device *dev;
+ u32 port;
+ int rc;
+
+ dev = &pdev->dev;
+
+ lpc_snoop = devm_kzalloc(dev, sizeof(*lpc_snoop), GFP_KERNEL);
+ if (!lpc_snoop)
+ return -ENOMEM;
+
+ lpc_snoop->regmap = syscon_node_to_regmap(
+ pdev->dev.parent->of_node);
+ if (IS_ERR(lpc_snoop->regmap)) {
+ dev_err(dev, "Couldn't get regmap\n");
+ return -ENODEV;
+ }
+
+ dev_set_drvdata(&pdev->dev, lpc_snoop);
+
+ rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port);
+ if (rc) {
+ dev_err(dev, "no snoop ports configured\n");
+ return -ENODEV;
+ }
+
+ rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev);
+ if (rc)
+ return rc;
+
+ rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
+ if (rc)
+ return rc;
+
+ /* Configuration of 2nd snoop channel port is optional */
+ if (of_property_read_u32_index(dev->of_node, "snoop-ports",
+ 1, &port) == 0) {
+ rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
+ if (rc)
+ aspeed_lpc_disable_snoop(lpc_snoop, 0);
+ }
+
+ return rc;
+}
+
+static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
+{
+ struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev);
+
+ /* Disable both snoop channels */
+ aspeed_lpc_disable_snoop(lpc_snoop, 0);
+ aspeed_lpc_disable_snoop(lpc_snoop, 1);
+
+ return 0;
+}
+
+static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
+ .has_hicrb_ensnp = 0,
+};
+
+static const struct aspeed_lpc_snoop_model_data ast2500_model_data = {
+ .has_hicrb_ensnp = 1,
+};
+
+static const struct of_device_id aspeed_lpc_snoop_match[] = {
+ { .compatible = "aspeed,ast2400-lpc-snoop",
+ .data = &ast2400_model_data },
+ { .compatible = "aspeed,ast2500-lpc-snoop",
+ .data = &ast2500_model_data },
+ { },
+};
+
+static struct platform_driver aspeed_lpc_snoop_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_lpc_snoop_match,
+ },
+ .probe = aspeed_lpc_snoop_probe,
+ .remove = aspeed_lpc_snoop_remove,
+};
+
+module_platform_driver(aspeed_lpc_snoop_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_lpc_snoop_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Lippert <rlippert@google.com>");
+MODULE_DESCRIPTION("Linux driver to control Aspeed LPC snoop functionality");
diff --git a/drivers/soc/aspeed/aspeed-p2a-ctrl.c b/drivers/soc/aspeed/aspeed-p2a-ctrl.c
new file mode 100644
index 0000000..b60fbea
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-p2a-ctrl.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Provides a simple driver to control the ASPEED P2A interface which allows
+ * the host to read and write to various regions of the BMC's memory.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/aspeed-p2a-ctrl.h>
+
+#define DEVICE_NAME "aspeed-p2a-ctrl"
+
+/* SCU2C is a Misc. Control Register. */
+#define SCU2C 0x2c
+/* SCU180 is the PCIe Configuration Setting Control Register. */
+#define SCU180 0x180
+/* Bit 1 controls the P2A bridge, while bit 0 controls the entire VGA device
+ * on the PCI bus.
+ */
+#define SCU180_ENP2A BIT(1)
+
+/* The ast2400/2500 both have six ranges. */
+#define P2A_REGION_COUNT 6
+
+struct region {
+ u64 min;
+ u64 max;
+ u32 bit;
+};
+
+struct aspeed_p2a_model_data {
+ /* min, max, bit */
+ struct region regions[P2A_REGION_COUNT];
+};
+
+struct aspeed_p2a_ctrl {
+ struct miscdevice miscdev;
+ struct regmap *regmap;
+
+ const struct aspeed_p2a_model_data *config;
+
+ /* Access to these needs to be locked, held via probe, mapping ioctl,
+ * and release, remove.
+ */
+ struct mutex tracking;
+ u32 readers;
+ u32 readerwriters[P2A_REGION_COUNT];
+
+ phys_addr_t mem_base;
+ resource_size_t mem_size;
+};
+
+struct aspeed_p2a_user {
+ struct file *file;
+ struct aspeed_p2a_ctrl *parent;
+
+ /* The entire memory space is opened for reading once the bridge is
+ * enabled, therefore this needs only to be tracked once per user.
+ * If any user has it open for read, the bridge must stay enabled.
+ */
+ u32 read;
+
+ /* Each entry of the array corresponds to a P2A Region. If the user
+ * opens for read or readwrite, the reference goes up here. On
+ * release, this array is walked and references adjusted accordingly.
+ */
+ u32 readwrite[P2A_REGION_COUNT];
+};
+
+static void aspeed_p2a_enable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
+{
+ regmap_update_bits(p2a_ctrl->regmap,
+ SCU180, SCU180_ENP2A, SCU180_ENP2A);
+}
+
+static void aspeed_p2a_disable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
+{
+ regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A, 0);
+}
+
+static int aspeed_p2a_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long vsize;
+ pgprot_t prot;
+ struct aspeed_p2a_user *priv = file->private_data;
+ struct aspeed_p2a_ctrl *ctrl = priv->parent;
+
+ if (ctrl->mem_base == 0 && ctrl->mem_size == 0)
+ return -EINVAL;
+
+ vsize = vma->vm_end - vma->vm_start;
+ prot = vma->vm_page_prot;
+
+ if (vma->vm_pgoff + vsize > ctrl->mem_base + ctrl->mem_size)
+ return -EINVAL;
+
+ /* ast2400/2500 AHB accesses are not cache coherent */
+ prot = pgprot_noncached(prot);
+
+ if (remap_pfn_range(vma, vma->vm_start,
+ (ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
+ vsize, prot))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static bool aspeed_p2a_region_acquire(struct aspeed_p2a_user *priv,
+ struct aspeed_p2a_ctrl *ctrl,
+ struct aspeed_p2a_ctrl_mapping *map)
+{
+ int i;
+ u64 base, end;
+ bool matched = false;
+
+ base = map->addr;
+ end = map->addr + (map->length - 1);
+
+ /* If the value is a legal u32, it will find a match. */
+ for (i = 0; i < P2A_REGION_COUNT; i++) {
+ const struct region *curr = &ctrl->config->regions[i];
+
+ /* If the top of this region is lower than your base, skip it.
+ */
+ if (curr->max < base)
+ continue;
+
+ /* If the bottom of this region is higher than your end, bail.
+ */
+ if (curr->min > end)
+ break;
+
+ /* Lock this and update it, therefore it someone else is
+ * closing their file out, this'll preserve the increment.
+ */
+ mutex_lock(&ctrl->tracking);
+ ctrl->readerwriters[i] += 1;
+ mutex_unlock(&ctrl->tracking);
+
+ /* Track with the user, so when they close their file, we can
+ * decrement properly.
+ */
+ priv->readwrite[i] += 1;
+
+ /* Enable the region as read-write. */
+ regmap_update_bits(ctrl->regmap, SCU2C, curr->bit, 0);
+ matched = true;
+ }
+
+ return matched;
+}
+
+static long aspeed_p2a_ioctl(struct file *file, unsigned int cmd,
+ unsigned long data)
+{
+ struct aspeed_p2a_user *priv = file->private_data;
+ struct aspeed_p2a_ctrl *ctrl = priv->parent;
+ void __user *arg = (void __user *)data;
+ struct aspeed_p2a_ctrl_mapping map;
+
+ if (copy_from_user(&map, arg, sizeof(map)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case ASPEED_P2A_CTRL_IOCTL_SET_WINDOW:
+ /* If they want a region to be read-only, since the entire
+ * region is read-only once enabled, we just need to track this
+ * user wants to read from the bridge, and if it's not enabled.
+ * Enable it.
+ */
+ if (map.flags == ASPEED_P2A_CTRL_READ_ONLY) {
+ mutex_lock(&ctrl->tracking);
+ ctrl->readers += 1;
+ mutex_unlock(&ctrl->tracking);
+
+ /* Track with the user, so when they close their file,
+ * we can decrement properly.
+ */
+ priv->read += 1;
+ } else if (map.flags == ASPEED_P2A_CTRL_READWRITE) {
+ /* If we don't acquire any region return error. */
+ if (!aspeed_p2a_region_acquire(priv, ctrl, &map)) {
+ return -EINVAL;
+ }
+ } else {
+ /* Invalid map flags. */
+ return -EINVAL;
+ }
+
+ aspeed_p2a_enable_bridge(ctrl);
+ return 0;
+ case ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG:
+ /* This is a request for the memory-region and corresponding
+ * length that is used by the driver for mmap.
+ */
+
+ map.flags = 0;
+ map.addr = ctrl->mem_base;
+ map.length = ctrl->mem_size;
+
+ return copy_to_user(arg, &map, sizeof(map)) ? -EFAULT : 0;
+ }
+
+ return -EINVAL;
+}
+
+
+/*
+ * When a user opens this file, we create a structure to track their mappings.
+ *
+ * A user can map a region as read-only (bridge enabled), or read-write (bit
+ * flipped, and bridge enabled). Either way, this tracking is used, s.t. when
+ * they release the device references are handled.
+ *
+ * The bridge is not enabled until a user calls an ioctl to map a region,
+ * simply opening the device does not enable it.
+ */
+static int aspeed_p2a_open(struct inode *inode, struct file *file)
+{
+ struct aspeed_p2a_user *priv;
+
+ priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->file = file;
+ priv->read = 0;
+ memset(priv->readwrite, 0, sizeof(priv->readwrite));
+
+ /* The file's private_data is initialized to the p2a_ctrl. */
+ priv->parent = file->private_data;
+
+ /* Set the file's private_data to the user's data. */
+ file->private_data = priv;
+
+ return 0;
+}
+
+/*
+ * This will close the users mappings. It will go through what they had opened
+ * for readwrite, and decrement those counts. If at the end, this is the last
+ * user, it'll close the bridge.
+ */
+static int aspeed_p2a_release(struct inode *inode, struct file *file)
+{
+ int i;
+ u32 bits = 0;
+ bool open_regions = false;
+ struct aspeed_p2a_user *priv = file->private_data;
+
+ /* Lock others from changing these values until everything is updated
+ * in one pass.
+ */
+ mutex_lock(&priv->parent->tracking);
+
+ priv->parent->readers -= priv->read;
+
+ for (i = 0; i < P2A_REGION_COUNT; i++) {
+ priv->parent->readerwriters[i] -= priv->readwrite[i];
+
+ if (priv->parent->readerwriters[i] > 0)
+ open_regions = true;
+ else
+ bits |= priv->parent->config->regions[i].bit;
+ }
+
+ /* Setting a bit to 1 disables the region, so let's just OR with the
+ * above to disable any.
+ */
+
+ /* Note, if another user is trying to ioctl, they can't grab tracking,
+ * and therefore can't grab either register mutex.
+ * If another user is trying to close, they can't grab tracking either.
+ */
+ regmap_update_bits(priv->parent->regmap, SCU2C, bits, bits);
+
+ /* If parent->readers is zero and open windows is 0, disable the
+ * bridge.
+ */
+ if (!open_regions && priv->parent->readers == 0)
+ aspeed_p2a_disable_bridge(priv->parent);
+
+ mutex_unlock(&priv->parent->tracking);
+
+ kfree(priv);
+
+ return 0;
+}
+
+static const struct file_operations aspeed_p2a_ctrl_fops = {
+ .owner = THIS_MODULE,
+ .mmap = aspeed_p2a_mmap,
+ .unlocked_ioctl = aspeed_p2a_ioctl,
+ .open = aspeed_p2a_open,
+ .release = aspeed_p2a_release,
+};
+
+/* The regions are controlled by SCU2C */
+static void aspeed_p2a_disable_all(struct aspeed_p2a_ctrl *p2a_ctrl)
+{
+ int i;
+ u32 value = 0;
+
+ for (i = 0; i < P2A_REGION_COUNT; i++)
+ value |= p2a_ctrl->config->regions[i].bit;
+
+ regmap_update_bits(p2a_ctrl->regmap, SCU2C, value, value);
+
+ /* Disable the bridge. */
+ aspeed_p2a_disable_bridge(p2a_ctrl);
+}
+
+static int aspeed_p2a_ctrl_probe(struct platform_device *pdev)
+{
+ struct aspeed_p2a_ctrl *misc_ctrl;
+ struct device *dev;
+ struct resource resm;
+ struct device_node *node;
+ int rc = 0;
+
+ dev = &pdev->dev;
+
+ misc_ctrl = devm_kzalloc(dev, sizeof(*misc_ctrl), GFP_KERNEL);
+ if (!misc_ctrl)
+ return -ENOMEM;
+
+ mutex_init(&misc_ctrl->tracking);
+
+ /* optional. */
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (node) {
+ rc = of_address_to_resource(node, 0, &resm);
+ of_node_put(node);
+ if (rc) {
+ dev_err(dev, "Couldn't address to resource for reserved memory\n");
+ return -ENODEV;
+ }
+
+ misc_ctrl->mem_size = resource_size(&resm);
+ misc_ctrl->mem_base = resm.start;
+ }
+
+ misc_ctrl->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(misc_ctrl->regmap)) {
+ dev_err(dev, "Couldn't get regmap\n");
+ return -ENODEV;
+ }
+
+ misc_ctrl->config = of_device_get_match_data(dev);
+
+ dev_set_drvdata(&pdev->dev, misc_ctrl);
+
+ aspeed_p2a_disable_all(misc_ctrl);
+
+ misc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
+ misc_ctrl->miscdev.name = DEVICE_NAME;
+ misc_ctrl->miscdev.fops = &aspeed_p2a_ctrl_fops;
+ misc_ctrl->miscdev.parent = dev;
+
+ rc = misc_register(&misc_ctrl->miscdev);
+ if (rc)
+ dev_err(dev, "Unable to register device\n");
+
+ return rc;
+}
+
+static int aspeed_p2a_ctrl_remove(struct platform_device *pdev)
+{
+ struct aspeed_p2a_ctrl *p2a_ctrl = dev_get_drvdata(&pdev->dev);
+
+ misc_deregister(&p2a_ctrl->miscdev);
+
+ return 0;
+}
+
+#define SCU2C_DRAM BIT(25)
+#define SCU2C_SPI BIT(24)
+#define SCU2C_SOC BIT(23)
+#define SCU2C_FLASH BIT(22)
+
+static const struct aspeed_p2a_model_data ast2400_model_data = {
+ .regions = {
+ {0x00000000, 0x17FFFFFF, SCU2C_FLASH},
+ {0x18000000, 0x1FFFFFFF, SCU2C_SOC},
+ {0x20000000, 0x2FFFFFFF, SCU2C_FLASH},
+ {0x30000000, 0x3FFFFFFF, SCU2C_SPI},
+ {0x40000000, 0x5FFFFFFF, SCU2C_DRAM},
+ {0x60000000, 0xFFFFFFFF, SCU2C_SOC},
+ }
+};
+
+static const struct aspeed_p2a_model_data ast2500_model_data = {
+ .regions = {
+ {0x00000000, 0x0FFFFFFF, SCU2C_FLASH},
+ {0x10000000, 0x1FFFFFFF, SCU2C_SOC},
+ {0x20000000, 0x3FFFFFFF, SCU2C_FLASH},
+ {0x40000000, 0x5FFFFFFF, SCU2C_SOC},
+ {0x60000000, 0x7FFFFFFF, SCU2C_SPI},
+ {0x80000000, 0xFFFFFFFF, SCU2C_DRAM},
+ }
+};
+
+static const struct of_device_id aspeed_p2a_ctrl_match[] = {
+ { .compatible = "aspeed,ast2400-p2a-ctrl",
+ .data = &ast2400_model_data },
+ { .compatible = "aspeed,ast2500-p2a-ctrl",
+ .data = &ast2500_model_data },
+ { },
+};
+
+static struct platform_driver aspeed_p2a_ctrl_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_p2a_ctrl_match,
+ },
+ .probe = aspeed_p2a_ctrl_probe,
+ .remove = aspeed_p2a_ctrl_remove,
+};
+
+module_platform_driver(aspeed_p2a_ctrl_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_p2a_ctrl_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick Venture <venture@google.com>");
+MODULE_DESCRIPTION("Control for aspeed 2400/2500 P2A VGA HOST to BMC mappings");