diff --git a/drivers/rtc/rtc-meson.c b/drivers/rtc/rtc-meson.c
new file mode 100644
index 0000000..e08b981
--- /dev/null
+++ b/drivers/rtc/rtc-meson.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RTC driver for the interal RTC block in the Amlogic Meson6, Meson8,
+ * Meson8b and Meson8m2 SoCs.
+ *
+ * The RTC is split in to two parts, the AHB front end and a simple serial
+ * connection to the actual registers. This driver manages both parts.
+ *
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ * Copyright (c) 2015 Ben Dooks <ben.dooks@codethink.co.uk> for Codethink Ltd
+ * Based on origin by Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/rtc.h>
+
+/* registers accessed from cpu bus */
+#define RTC_ADDR0				0x00
+	#define RTC_ADDR0_LINE_SCLK		BIT(0)
+	#define RTC_ADDR0_LINE_SEN		BIT(1)
+	#define RTC_ADDR0_LINE_SDI		BIT(2)
+	#define RTC_ADDR0_START_SER		BIT(17)
+	#define RTC_ADDR0_WAIT_SER		BIT(22)
+	#define RTC_ADDR0_DATA			GENMASK(31, 24)
+
+#define RTC_ADDR1				0x04
+	#define RTC_ADDR1_SDO			BIT(0)
+	#define RTC_ADDR1_S_READY		BIT(1)
+
+#define RTC_ADDR2				0x08
+#define RTC_ADDR3				0x0c
+
+#define RTC_REG4				0x10
+	#define RTC_REG4_STATIC_VALUE		GENMASK(7, 0)
+
+/* rtc registers accessed via rtc-serial interface */
+#define RTC_COUNTER		(0)
+#define RTC_SEC_ADJ		(2)
+#define RTC_REGMEM_0		(4)
+#define RTC_REGMEM_1		(5)
+#define RTC_REGMEM_2		(6)
+#define RTC_REGMEM_3		(7)
+
+#define RTC_ADDR_BITS		(3)	/* number of address bits to send */
+#define RTC_DATA_BITS		(32)	/* number of data bits to tx/rx */
+
+#define MESON_STATIC_BIAS_CUR	(0x5 << 1)
+#define MESON_STATIC_VOLTAGE	(0x3 << 11)
+#define MESON_STATIC_DEFAULT    (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE)
+
+struct meson_rtc {
+	struct rtc_device	*rtc;		/* rtc device we created */
+	struct device		*dev;		/* device we bound from */
+	struct reset_control	*reset;		/* reset source */
+	struct regulator	*vdd;		/* voltage input */
+	struct regmap		*peripheral;	/* peripheral registers */
+	struct regmap		*serial;	/* serial registers */
+};
+
+static const struct regmap_config meson_rtc_peripheral_regmap_config = {
+	.name		= "peripheral-registers",
+	.reg_bits	= 8,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= RTC_REG4,
+	.fast_io	= true,
+};
+
+/* RTC front-end serialiser controls */
+
+static void meson_rtc_sclk_pulse(struct meson_rtc *rtc)
+{
+	udelay(5);
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0);
+	udelay(5);
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK,
+			   RTC_ADDR0_LINE_SCLK);
+}
+
+static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit)
+{
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI,
+			   bit ? RTC_ADDR0_LINE_SDI : 0);
+	meson_rtc_sclk_pulse(rtc);
+}
+
+static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data,
+				unsigned int nr)
+{
+	u32 bit = 1 << (nr - 1);
+
+	while (bit) {
+		meson_rtc_send_bit(rtc, data & bit);
+		bit >>= 1;
+	}
+}
+
+static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode)
+{
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0);
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0);
+	meson_rtc_send_bit(rtc, mode);
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0);
+}
+
+static u32 meson_rtc_get_data(struct meson_rtc *rtc)
+{
+	u32 tmp, val = 0;
+	int bit;
+
+	for (bit = 0; bit < RTC_DATA_BITS; bit++) {
+		meson_rtc_sclk_pulse(rtc);
+		val <<= 1;
+
+		regmap_read(rtc->peripheral, RTC_ADDR1, &tmp);
+		val |= tmp & RTC_ADDR1_SDO;
+	}
+
+	return val;
+}
+
+static int meson_rtc_get_bus(struct meson_rtc *rtc)
+{
+	int ret, retries = 3;
+	u32 val;
+
+	/* prepare bus for transfers, set all lines low */
+	val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK;
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0);
+
+	for (retries = 0; retries < 3; retries++) {
+		/* wait for the bus to be ready */
+		if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val,
+					      val & RTC_ADDR1_S_READY, 10,
+					      10000))
+			return 0;
+
+		dev_warn(rtc->dev, "failed to get bus, resetting RTC\n");
+
+		ret = reset_control_reset(rtc->reset);
+		if (ret)
+			return ret;
+	}
+
+	dev_err(rtc->dev, "bus is not ready\n");
+	return -ETIMEDOUT;
+}
+
+static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg,
+					 unsigned int *data)
+{
+	struct meson_rtc *rtc = context;
+	int ret;
+
+	ret = meson_rtc_get_bus(rtc);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN,
+			   RTC_ADDR0_LINE_SEN);
+	meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS);
+	meson_rtc_set_dir(rtc, 0);
+	*data = meson_rtc_get_data(rtc);
+
+	return 0;
+}
+
+static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg,
+					  unsigned int data)
+{
+	struct meson_rtc *rtc = context;
+	int ret;
+
+	ret = meson_rtc_get_bus(rtc);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN,
+			   RTC_ADDR0_LINE_SEN);
+	meson_rtc_send_bits(rtc, data, RTC_DATA_BITS);
+	meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS);
+	meson_rtc_set_dir(rtc, 1);
+
+	return 0;
+}
+
+static const struct regmap_bus meson_rtc_serial_bus = {
+	.reg_read	= meson_rtc_serial_bus_reg_read,
+	.reg_write	= meson_rtc_serial_bus_reg_write,
+};
+
+static const struct regmap_config meson_rtc_serial_regmap_config = {
+	.name		= "serial-registers",
+	.reg_bits	= 4,
+	.reg_stride	= 1,
+	.val_bits	= 32,
+	.max_register	= RTC_REGMEM_3,
+	.fast_io	= false,
+};
+
+static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data)
+{
+	u32 tmp;
+
+	regmap_write(rtc->peripheral, RTC_REG4,
+		     FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8)));
+
+	/* write the static value and start the auto serializer */
+	tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER;
+	regmap_update_bits(rtc->peripheral, RTC_ADDR0,
+			   RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp);
+
+	/* wait for the auto serializer to complete */
+	return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp,
+					!(tmp & RTC_ADDR0_WAIT_SER), 10,
+					10000);
+}
+
+/* RTC interface layer functions */
+
+static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm)
+{
+	struct meson_rtc *rtc = dev_get_drvdata(dev);
+	u32 time;
+	int ret;
+
+	ret = regmap_read(rtc->serial, RTC_COUNTER, &time);
+	if (!ret)
+		rtc_time64_to_tm(time, tm);
+
+	return ret;
+}
+
+static int meson_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct meson_rtc *rtc = dev_get_drvdata(dev);
+
+	return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm));
+}
+
+static const struct rtc_class_ops meson_rtc_ops = {
+	.read_time	= meson_rtc_gettime,
+	.set_time	= meson_rtc_settime,
+};
+
+/* NVMEM interface layer functions */
+
+static int meson_rtc_regmem_read(void *context, unsigned int offset,
+				 void *buf, size_t bytes)
+{
+	struct meson_rtc *rtc = context;
+	unsigned int read_offset, read_size;
+
+	read_offset = RTC_REGMEM_0 + (offset / 4);
+	read_size = bytes / 4;
+
+	return regmap_bulk_read(rtc->serial, read_offset, buf, read_size);
+}
+
+static int meson_rtc_regmem_write(void *context, unsigned int offset,
+				  void *buf, size_t bytes)
+{
+	struct meson_rtc *rtc = context;
+	unsigned int write_offset, write_size;
+
+	write_offset = RTC_REGMEM_0 + (offset / 4);
+	write_size = bytes / 4;
+
+	return regmap_bulk_write(rtc->serial, write_offset, buf, write_size);
+}
+
+static int meson_rtc_probe(struct platform_device *pdev)
+{
+	struct nvmem_config meson_rtc_nvmem_config = {
+		.name = "meson-rtc-regmem",
+		.type = NVMEM_TYPE_BATTERY_BACKED,
+		.word_size = 4,
+		.stride = 4,
+		.size = 4 * 4,
+		.reg_read = meson_rtc_regmem_read,
+		.reg_write = meson_rtc_regmem_write,
+	};
+	struct device *dev = &pdev->dev;
+	struct meson_rtc *rtc;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+	u32 tm;
+
+	rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->rtc = devm_rtc_allocate_device(dev);
+	if (IS_ERR(rtc->rtc))
+		return PTR_ERR(rtc->rtc);
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->dev = dev;
+
+	rtc->rtc->ops = &meson_rtc_ops;
+	rtc->rtc->range_max = U32_MAX;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	rtc->peripheral = devm_regmap_init_mmio(dev, base,
+					&meson_rtc_peripheral_regmap_config);
+	if (IS_ERR(rtc->peripheral)) {
+		dev_err(dev, "failed to create peripheral regmap\n");
+		return PTR_ERR(rtc->peripheral);
+	}
+
+	rtc->reset = devm_reset_control_get(dev, NULL);
+	if (IS_ERR(rtc->reset)) {
+		dev_err(dev, "missing reset line\n");
+		return PTR_ERR(rtc->reset);
+	}
+
+	rtc->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(rtc->vdd)) {
+		dev_err(dev, "failed to get the vdd-supply\n");
+		return PTR_ERR(rtc->vdd);
+	}
+
+	ret = regulator_enable(rtc->vdd);
+	if (ret) {
+		dev_err(dev, "failed to enable vdd-supply\n");
+		return ret;
+	}
+
+	ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT);
+	if (ret) {
+		dev_err(dev, "failed to set static values\n");
+		goto out_disable_vdd;
+	}
+
+	rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc,
+				       &meson_rtc_serial_regmap_config);
+	if (IS_ERR(rtc->serial)) {
+		dev_err(dev, "failed to create serial regmap\n");
+		ret = PTR_ERR(rtc->serial);
+		goto out_disable_vdd;
+	}
+
+	/*
+	 * check if we can read RTC counter, if not then the RTC is probably
+	 * not functional. If it isn't probably best to not bind.
+	 */
+	ret = regmap_read(rtc->serial, RTC_COUNTER, &tm);
+	if (ret) {
+		dev_err(dev, "cannot read RTC counter, RTC not functional\n");
+		goto out_disable_vdd;
+	}
+
+	meson_rtc_nvmem_config.priv = rtc;
+	ret = rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config);
+	if (ret)
+		goto out_disable_vdd;
+
+	ret = rtc_register_device(rtc->rtc);
+	if (ret)
+		goto out_disable_vdd;
+
+	return 0;
+
+out_disable_vdd:
+	regulator_disable(rtc->vdd);
+	return ret;
+}
+
+static const struct of_device_id meson_rtc_dt_match[] = {
+	{ .compatible = "amlogic,meson6-rtc", },
+	{ .compatible = "amlogic,meson8-rtc", },
+	{ .compatible = "amlogic,meson8b-rtc", },
+	{ .compatible = "amlogic,meson8m2-rtc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, meson_rtc_dt_match);
+
+static struct platform_driver meson_rtc_driver = {
+	.probe		= meson_rtc_probe,
+	.driver		= {
+		.name		= "meson-rtc",
+		.of_match_table	= of_match_ptr(meson_rtc_dt_match),
+	},
+};
+module_platform_driver(meson_rtc_driver);
+
+MODULE_DESCRIPTION("Amlogic Meson RTC Driver");
+MODULE_AUTHOR("Ben Dooks <ben.doosk@codethink.co.uk>");
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:meson-rtc");