Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index f40c3b8..c025ccb 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -1,16 +1,10 @@
-/*
-* Regulator driver for DA9055 PMIC
-*
-* Copyright(c) 2012 Dialog Semiconductor Ltd.
-*
-* Author: David Dajun Chen <dchen@diasemi.com>
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-*/
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Regulator driver for DA9055 PMIC
+//
+// Copyright(c) 2012 Dialog Semiconductor Ltd.
+//
+// Author: David Dajun Chen <dchen@diasemi.com>
#include <linux/module.h>
#include <linux/init.h>
@@ -48,7 +42,9 @@
#define DA9055_ID_LDO6 7
/* DA9055 BUCK current limit */
-static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
+static const unsigned int da9055_current_limits[] = {
+ 500000, 600000, 700000, 800000
+};
struct da9055_conf_reg {
int reg;
@@ -169,39 +165,6 @@
val << volt.sl_shift);
}
-static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
-{
- struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9055_regulator_info *info = regulator->info;
- int ret;
-
- ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
- if (ret < 0)
- return ret;
-
- ret &= info->mode.mask;
- return da9055_current_limits[ret >> info->mode.shift];
-}
-
-static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
- int max_uA)
-{
- struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9055_regulator_info *info = regulator->info;
- int i;
-
- for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
- if ((min_uA <= da9055_current_limits[i]) &&
- (da9055_current_limits[i] <= max_uA))
- return da9055_reg_update(regulator->da9055,
- DA9055_REG_BUCK_LIM,
- info->mode.mask,
- i << info->mode.shift);
- }
-
- return -EINVAL;
-}
-
static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
@@ -329,8 +292,8 @@
.get_mode = da9055_buck_get_mode,
.set_mode = da9055_buck_set_mode,
- .get_current_limit = da9055_buck_get_current_limit,
- .set_current_limit = da9055_buck_set_current_limit,
+ .get_current_limit = regulator_get_current_limit_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
.get_voltage_sel = da9055_regulator_get_voltage_sel,
.set_voltage_sel = da9055_regulator_set_voltage_sel,
@@ -369,6 +332,8 @@
{\
.reg_desc = {\
.name = #_id,\
+ .of_match = of_match_ptr(#_id),\
+ .regulators_node = of_match_ptr("regulators"),\
.ops = &da9055_ldo_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9055_ID_##_id,\
@@ -397,6 +362,8 @@
{\
.reg_desc = {\
.name = #_id,\
+ .of_match = of_match_ptr(#_id),\
+ .regulators_node = of_match_ptr("regulators"),\
.ops = &da9055_buck_ops,\
.type = REGULATOR_VOLTAGE,\
.id = DA9055_ID_##_id,\
@@ -407,6 +374,10 @@
.uV_step = (step) * 1000,\
.linear_min_sel = (voffset),\
.owner = THIS_MODULE,\
+ .curr_table = da9055_current_limits,\
+ .n_current_limits = ARRAY_SIZE(da9055_current_limits),\
+ .csel_reg = DA9055_REG_BUCK_LIM,\
+ .csel_mask = (mbits),\
},\
.conf = {\
.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
@@ -457,7 +428,6 @@
int gpio_mux = pdata->gpio_ren[id];
config->ena_gpiod = pdata->ena_gpiods[id];
- config->ena_gpio_invert = 1;
/*
* GPI pin is muxed with regulator to control the
@@ -515,8 +485,10 @@
{
struct da9055_regulator *regulator = data;
+ regulator_lock(regulator->rdev);
regulator_notifier_call_chain(regulator->rdev,
REGULATOR_EVENT_OVER_CURRENT, NULL);
+ regulator_unlock(regulator->rdev);
return IRQ_HANDLED;
}
@@ -535,59 +507,6 @@
return NULL;
}
-#ifdef CONFIG_OF
-static struct of_regulator_match da9055_reg_matches[] = {
- { .name = "BUCK1", },
- { .name = "BUCK2", },
- { .name = "LDO1", },
- { .name = "LDO2", },
- { .name = "LDO3", },
- { .name = "LDO4", },
- { .name = "LDO5", },
- { .name = "LDO6", },
-};
-
-static int da9055_regulator_dt_init(struct platform_device *pdev,
- struct da9055_regulator *regulator,
- struct regulator_config *config,
- int regid)
-{
- struct device_node *nproot, *np;
- int ret;
-
- nproot = of_node_get(pdev->dev.parent->of_node);
- if (!nproot)
- return -ENODEV;
-
- np = of_get_child_by_name(nproot, "regulators");
- if (!np)
- return -ENODEV;
-
- ret = of_regulator_match(&pdev->dev, np, &da9055_reg_matches[regid], 1);
- of_node_put(nproot);
- if (ret < 0) {
- dev_err(&pdev->dev, "Error matching regulator: %d\n", ret);
- return ret;
- }
-
- config->init_data = da9055_reg_matches[regid].init_data;
- config->of_node = da9055_reg_matches[regid].of_node;
-
- if (!config->of_node)
- return -ENODEV;
-
- return 0;
-}
-#else
-static inline int da9055_regulator_dt_init(struct platform_device *pdev,
- struct da9055_regulator *regulator,
- struct regulator_config *config,
- int regid)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_OF */
-
static int da9055_regulator_probe(struct platform_device *pdev)
{
struct regulator_config config = { };
@@ -608,18 +527,12 @@
}
regulator->da9055 = da9055;
- config.dev = &pdev->dev;
+ config.dev = da9055->dev;
config.driver_data = regulator;
config.regmap = da9055->regmap;
- if (pdata && pdata->regulators) {
+ if (pdata)
config.init_data = pdata->regulators[pdev->id];
- } else {
- ret = da9055_regulator_dt_init(pdev, regulator, &config,
- pdev->id);
- if (ret < 0)
- return ret;
- }
ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
if (ret < 0)