Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
new file mode 100644
index 0000000..320630f
--- /dev/null
+++ b/drivers/phy/freescale/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config PHY_FSL_IMX8MQ_USB
+ tristate "Freescale i.MX8M USB3 PHY"
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ default ARCH_MXC && ARM64
+
+config PHY_MIXEL_MIPI_DPHY
+ tristate "Mixel MIPI DSI PHY support"
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ select REGMAP_MMIO
+ help
+ Enable this to add support for the Mixel DSI PHY as found
+ on NXP's i.MX8 family of SOCs.
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
new file mode 100644
index 0000000..1d02e38
--- /dev/null
+++ b/drivers/phy/freescale/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o
+obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
new file mode 100644
index 0000000..9f2c1da
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017,2018 NXP
+ * Copyright 2019 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* DPHY registers */
+#define DPHY_PD_DPHY 0x00
+#define DPHY_M_PRG_HS_PREPARE 0x04
+#define DPHY_MC_PRG_HS_PREPARE 0x08
+#define DPHY_M_PRG_HS_ZERO 0x0c
+#define DPHY_MC_PRG_HS_ZERO 0x10
+#define DPHY_M_PRG_HS_TRAIL 0x14
+#define DPHY_MC_PRG_HS_TRAIL 0x18
+#define DPHY_PD_PLL 0x1c
+#define DPHY_TST 0x20
+#define DPHY_CN 0x24
+#define DPHY_CM 0x28
+#define DPHY_CO 0x2c
+#define DPHY_LOCK 0x30
+#define DPHY_LOCK_BYP 0x34
+#define DPHY_REG_BYPASS_PLL 0x4C
+
+#define MBPS(x) ((x) * 1000000)
+
+#define DATA_RATE_MAX_SPEED MBPS(1500)
+#define DATA_RATE_MIN_SPEED MBPS(80)
+
+#define PLL_LOCK_SLEEP 10
+#define PLL_LOCK_TIMEOUT 1000
+
+#define CN_BUF 0xcb7a89c0
+#define CO_BUF 0x63
+#define CM(x) ( \
+ ((x) < 32) ? 0xe0 | ((x) - 16) : \
+ ((x) < 64) ? 0xc0 | ((x) - 32) : \
+ ((x) < 128) ? 0x80 | ((x) - 64) : \
+ ((x) - 128))
+#define CN(x) (((x) == 1) ? 0x1f : (((CN_BUF) >> ((x) - 1)) & 0x1f))
+#define CO(x) ((CO_BUF) >> (8 - (x)) & 0x03)
+
+/* PHY power on is active low */
+#define PWR_ON 0
+#define PWR_OFF 1
+
+enum mixel_dphy_devtype {
+ MIXEL_IMX8MQ,
+};
+
+struct mixel_dphy_devdata {
+ u8 reg_tx_rcal;
+ u8 reg_auto_pd_en;
+ u8 reg_rxlprp;
+ u8 reg_rxcdrp;
+ u8 reg_rxhs_settle;
+};
+
+static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
+ [MIXEL_IMX8MQ] = {
+ .reg_tx_rcal = 0x38,
+ .reg_auto_pd_en = 0x3c,
+ .reg_rxlprp = 0x40,
+ .reg_rxcdrp = 0x44,
+ .reg_rxhs_settle = 0x48,
+ },
+};
+
+struct mixel_dphy_cfg {
+ /* DPHY PLL parameters */
+ u32 cm;
+ u32 cn;
+ u32 co;
+ /* DPHY register values */
+ u8 mc_prg_hs_prepare;
+ u8 m_prg_hs_prepare;
+ u8 mc_prg_hs_zero;
+ u8 m_prg_hs_zero;
+ u8 mc_prg_hs_trail;
+ u8 m_prg_hs_trail;
+ u8 rxhs_settle;
+};
+
+struct mixel_dphy_priv {
+ struct mixel_dphy_cfg cfg;
+ struct regmap *regmap;
+ struct clk *phy_ref_clk;
+ const struct mixel_dphy_devdata *devdata;
+};
+
+static const struct regmap_config mixel_dphy_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = DPHY_REG_BYPASS_PLL,
+ .name = "mipi-dphy",
+};
+
+static int phy_write(struct phy *phy, u32 value, unsigned int reg)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = regmap_write(priv->regmap, reg, value);
+ if (ret < 0)
+ dev_err(&phy->dev, "Failed to write DPHY reg %d: %d\n", reg,
+ ret);
+ return ret;
+}
+
+/*
+ * Find a ratio close to the desired one using continued fraction
+ * approximation ending either at exact match or maximum allowed
+ * nominator, denominator.
+ */
+static void get_best_ratio(u32 *pnum, u32 *pdenom, u32 max_n, u32 max_d)
+{
+ u32 a = *pnum;
+ u32 b = *pdenom;
+ u32 c;
+ u32 n[] = {0, 1};
+ u32 d[] = {1, 0};
+ u32 whole;
+ unsigned int i = 1;
+
+ while (b) {
+ i ^= 1;
+ whole = a / b;
+ n[i] += (n[i ^ 1] * whole);
+ d[i] += (d[i ^ 1] * whole);
+ if ((n[i] > max_n) || (d[i] > max_d)) {
+ i ^= 1;
+ break;
+ }
+ c = a - (b * whole);
+ a = b;
+ b = c;
+ }
+ *pnum = n[i];
+ *pdenom = d[i];
+}
+
+static int mixel_dphy_config_from_opts(struct phy *phy,
+ struct phy_configure_opts_mipi_dphy *dphy_opts,
+ struct mixel_dphy_cfg *cfg)
+{
+ struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+ unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk);
+ u32 lp_t, numerator, denominator;
+ unsigned long long tmp;
+ u32 n;
+ int i;
+
+ if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED ||
+ dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED)
+ return -EINVAL;
+
+ numerator = dphy_opts->hs_clk_rate;
+ denominator = ref_clk;
+ get_best_ratio(&numerator, &denominator, 255, 256);
+ if (!numerator || !denominator) {
+ dev_err(&phy->dev, "Invalid %d/%d for %ld/%ld\n",
+ numerator, denominator,
+ dphy_opts->hs_clk_rate, ref_clk);
+ return -EINVAL;
+ }
+
+ while ((numerator < 16) && (denominator <= 128)) {
+ numerator <<= 1;
+ denominator <<= 1;
+ }
+ /*
+ * CM ranges between 16 and 255
+ * CN ranges between 1 and 32
+ * CO is power of 2: 1, 2, 4, 8
+ */
+ i = __ffs(denominator);
+ if (i > 3)
+ i = 3;
+ cfg->cn = denominator >> i;
+ cfg->co = 1 << i;
+ cfg->cm = numerator;
+
+ if (cfg->cm < 16 || cfg->cm > 255 ||
+ cfg->cn < 1 || cfg->cn > 32 ||
+ cfg->co < 1 || cfg->co > 8) {
+ dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n",
+ cfg->cm, cfg->cn, cfg->co);
+ dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
+ dphy_opts->hs_clk_rate, ref_clk,
+ numerator, denominator);
+ return -EINVAL;
+ }
+
+ dev_dbg(&phy->dev, "hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
+ dphy_opts->hs_clk_rate, ref_clk, numerator, denominator);
+
+ /* LP clock period */
+ tmp = 1000000000000LL;
+ do_div(tmp, dphy_opts->lp_clk_rate); /* ps */
+ if (tmp > ULONG_MAX)
+ return -EINVAL;
+
+ lp_t = tmp;
+ dev_dbg(&phy->dev, "LP clock %lu, period: %u ps\n",
+ dphy_opts->lp_clk_rate, lp_t);
+
+ /* hs_prepare: in lp clock periods */
+ if (2 * dphy_opts->hs_prepare > 5 * lp_t) {
+ dev_err(&phy->dev,
+ "hs_prepare (%u) > 2.5 * lp clock period (%u)\n",
+ dphy_opts->hs_prepare, lp_t);
+ return -EINVAL;
+ }
+ /* 00: lp_t, 01: 1.5 * lp_t, 10: 2 * lp_t, 11: 2.5 * lp_t */
+ if (dphy_opts->hs_prepare < lp_t) {
+ n = 0;
+ } else {
+ tmp = 2 * (dphy_opts->hs_prepare - lp_t);
+ do_div(tmp, lp_t);
+ n = tmp;
+ }
+ cfg->m_prg_hs_prepare = n;
+
+ /* clk_prepare: in lp clock periods */
+ if (2 * dphy_opts->clk_prepare > 3 * lp_t) {
+ dev_err(&phy->dev,
+ "clk_prepare (%u) > 1.5 * lp clock period (%u)\n",
+ dphy_opts->clk_prepare, lp_t);
+ return -EINVAL;
+ }
+ /* 00: lp_t, 01: 1.5 * lp_t */
+ cfg->mc_prg_hs_prepare = dphy_opts->clk_prepare > lp_t ? 1 : 0;
+
+ /* hs_zero: formula from NXP BSP */
+ n = (144 * (dphy_opts->hs_clk_rate / 1000000) - 47500) / 10000;
+ cfg->m_prg_hs_zero = n < 1 ? 1 : n;
+
+ /* clk_zero: formula from NXP BSP */
+ n = (34 * (dphy_opts->hs_clk_rate / 1000000) - 2500) / 1000;
+ cfg->mc_prg_hs_zero = n < 1 ? 1 : n;
+
+ /* clk_trail, hs_trail: formula from NXP BSP */
+ n = (103 * (dphy_opts->hs_clk_rate / 1000000) + 10000) / 10000;
+ if (n > 15)
+ n = 15;
+ if (n < 1)
+ n = 1;
+ cfg->m_prg_hs_trail = n;
+ cfg->mc_prg_hs_trail = n;
+
+ /* rxhs_settle: formula from NXP BSP */
+ if (dphy_opts->hs_clk_rate < MBPS(80))
+ cfg->rxhs_settle = 0x0d;
+ else if (dphy_opts->hs_clk_rate < MBPS(90))
+ cfg->rxhs_settle = 0x0c;
+ else if (dphy_opts->hs_clk_rate < MBPS(125))
+ cfg->rxhs_settle = 0x0b;
+ else if (dphy_opts->hs_clk_rate < MBPS(150))
+ cfg->rxhs_settle = 0x0a;
+ else if (dphy_opts->hs_clk_rate < MBPS(225))
+ cfg->rxhs_settle = 0x09;
+ else if (dphy_opts->hs_clk_rate < MBPS(500))
+ cfg->rxhs_settle = 0x08;
+ else
+ cfg->rxhs_settle = 0x07;
+
+ dev_dbg(&phy->dev, "phy_config: %u %u %u %u %u %u %u\n",
+ cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare,
+ cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero,
+ cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail,
+ cfg->rxhs_settle);
+
+ return 0;
+}
+
+static void mixel_phy_set_hs_timings(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+ phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE);
+ phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE);
+ phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO);
+ phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO);
+ phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL);
+ phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL);
+ phy_write(phy, priv->cfg.rxhs_settle, priv->devdata->reg_rxhs_settle);
+}
+
+static int mixel_dphy_set_pll_params(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ if (priv->cfg.cm < 16 || priv->cfg.cm > 255 ||
+ priv->cfg.cn < 1 || priv->cfg.cn > 32 ||
+ priv->cfg.co < 1 || priv->cfg.co > 8) {
+ dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n",
+ priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+ return -EINVAL;
+ }
+ dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
+ priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+ phy_write(phy, CM(priv->cfg.cm), DPHY_CM);
+ phy_write(phy, CN(priv->cfg.cn), DPHY_CN);
+ phy_write(phy, CO(priv->cfg.co), DPHY_CO);
+ return 0;
+}
+
+static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ struct mixel_dphy_cfg cfg = { 0 };
+ int ret;
+
+ ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+ if (ret)
+ return ret;
+
+ /* Update the configuration */
+ memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg));
+
+ phy_write(phy, 0x00, DPHY_LOCK_BYP);
+ phy_write(phy, 0x01, priv->devdata->reg_tx_rcal);
+ phy_write(phy, 0x00, priv->devdata->reg_auto_pd_en);
+ phy_write(phy, 0x02, priv->devdata->reg_rxlprp);
+ phy_write(phy, 0x02, priv->devdata->reg_rxcdrp);
+ phy_write(phy, 0x25, DPHY_TST);
+
+ mixel_phy_set_hs_timings(phy);
+ ret = mixel_dphy_set_pll_params(phy);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts)
+{
+ struct mixel_dphy_cfg cfg = { 0 };
+
+ if (mode != PHY_MODE_MIPI_DPHY)
+ return -EINVAL;
+
+ return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+}
+
+static int mixel_dphy_init(struct phy *phy)
+{
+ phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+ phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+ return 0;
+}
+
+static int mixel_dphy_exit(struct phy *phy)
+{
+ phy_write(phy, 0, DPHY_CM);
+ phy_write(phy, 0, DPHY_CN);
+ phy_write(phy, 0, DPHY_CO);
+
+ return 0;
+}
+
+static int mixel_dphy_power_on(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ u32 locked;
+ int ret;
+
+ ret = clk_prepare_enable(priv->phy_ref_clk);
+ if (ret < 0)
+ return ret;
+
+ phy_write(phy, PWR_ON, DPHY_PD_PLL);
+ ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
+ locked, PLL_LOCK_SLEEP,
+ PLL_LOCK_TIMEOUT);
+ if (ret < 0) {
+ dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret);
+ goto clock_disable;
+ }
+ phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+
+ return 0;
+clock_disable:
+ clk_disable_unprepare(priv->phy_ref_clk);
+ return ret;
+}
+
+static int mixel_dphy_power_off(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+ phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+ phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+ clk_disable_unprepare(priv->phy_ref_clk);
+
+ return 0;
+}
+
+static const struct phy_ops mixel_dphy_phy_ops = {
+ .init = mixel_dphy_init,
+ .exit = mixel_dphy_exit,
+ .power_on = mixel_dphy_power_on,
+ .power_off = mixel_dphy_power_off,
+ .configure = mixel_dphy_configure,
+ .validate = mixel_dphy_validate,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id mixel_dphy_of_match[] = {
+ { .compatible = "fsl,imx8mq-mipi-dphy",
+ .data = &mixel_dphy_devdata[MIXEL_IMX8MQ] },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
+
+static int mixel_dphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+ struct mixel_dphy_priv *priv;
+ struct resource *res;
+ struct phy *phy;
+ void __iomem *base;
+
+ if (!np)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->devdata = of_device_get_match_data(&pdev->dev);
+ if (!priv->devdata)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &mixel_dphy_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ dev_err(dev, "Couldn't create the DPHY regmap\n");
+ return PTR_ERR(priv->regmap);
+ }
+
+ priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref");
+ if (IS_ERR(priv->phy_ref_clk)) {
+ dev_err(dev, "No phy_ref clock found\n");
+ return PTR_ERR(priv->phy_ref_clk);
+ }
+ dev_dbg(dev, "phy_ref clock rate: %lu\n",
+ clk_get_rate(priv->phy_ref_clk));
+
+ dev_set_drvdata(dev, priv);
+
+ phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver mixel_dphy_driver = {
+ .probe = mixel_dphy_probe,
+ .driver = {
+ .name = "mixel-mipi-dphy",
+ .of_match_table = mixel_dphy_of_match,
+ }
+};
+module_platform_driver(mixel_dphy_driver);
+
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
new file mode 100644
index 0000000..0c4833d
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2017 NXP. */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define PHY_CTRL0 0x0
+#define PHY_CTRL0_REF_SSP_EN BIT(2)
+
+#define PHY_CTRL1 0x4
+#define PHY_CTRL1_RESET BIT(0)
+#define PHY_CTRL1_COMMONONN BIT(1)
+#define PHY_CTRL1_ATERESET BIT(3)
+#define PHY_CTRL1_VDATSRCENB0 BIT(19)
+#define PHY_CTRL1_VDATDETENB0 BIT(20)
+
+#define PHY_CTRL2 0x8
+#define PHY_CTRL2_TXENABLEN0 BIT(8)
+
+struct imx8mq_usb_phy {
+ struct phy *phy;
+ struct clk *clk;
+ void __iomem *base;
+ struct regulator *vbus;
+};
+
+static int imx8mq_usb_phy_init(struct phy *phy)
+{
+ struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+ u32 value;
+
+ value = readl(imx_phy->base + PHY_CTRL1);
+ value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 |
+ PHY_CTRL1_COMMONONN);
+ value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+ writel(value, imx_phy->base + PHY_CTRL1);
+
+ value = readl(imx_phy->base + PHY_CTRL0);
+ value |= PHY_CTRL0_REF_SSP_EN;
+ writel(value, imx_phy->base + PHY_CTRL0);
+
+ value = readl(imx_phy->base + PHY_CTRL2);
+ value |= PHY_CTRL2_TXENABLEN0;
+ writel(value, imx_phy->base + PHY_CTRL2);
+
+ value = readl(imx_phy->base + PHY_CTRL1);
+ value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+ writel(value, imx_phy->base + PHY_CTRL1);
+
+ return 0;
+}
+
+static int imx8mq_phy_power_on(struct phy *phy)
+{
+ struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+ int ret;
+
+ ret = regulator_enable(imx_phy->vbus);
+ if (ret)
+ return ret;
+
+ return clk_prepare_enable(imx_phy->clk);
+}
+
+static int imx8mq_phy_power_off(struct phy *phy)
+{
+ struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(imx_phy->clk);
+ regulator_disable(imx_phy->vbus);
+
+ return 0;
+}
+
+static struct phy_ops imx8mq_usb_phy_ops = {
+ .init = imx8mq_usb_phy_init,
+ .power_on = imx8mq_phy_power_on,
+ .power_off = imx8mq_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int imx8mq_usb_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct imx8mq_usb_phy *imx_phy;
+ struct resource *res;
+
+ imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
+ if (!imx_phy)
+ return -ENOMEM;
+
+ imx_phy->clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(imx_phy->clk)) {
+ dev_err(dev, "failed to get imx8mq usb phy clock\n");
+ return PTR_ERR(imx_phy->clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ imx_phy->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(imx_phy->base))
+ return PTR_ERR(imx_phy->base);
+
+ imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops);
+ if (IS_ERR(imx_phy->phy))
+ return PTR_ERR(imx_phy->phy);
+
+ imx_phy->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(imx_phy->vbus))
+ return PTR_ERR(imx_phy->vbus);
+
+ phy_set_drvdata(imx_phy->phy, imx_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+ {.compatible = "fsl,imx8mq-usb-phy",},
+ { },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
+static struct platform_driver imx8mq_usb_phy_driver = {
+ .probe = imx8mq_usb_phy_probe,
+ .driver = {
+ .name = "imx8mq-usb-phy",
+ .of_match_table = imx8mq_usb_phy_of_match,
+ }
+};
+module_platform_driver(imx8mq_usb_phy_driver);
+
+MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver");
+MODULE_LICENSE("GPL");