Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index da7c723..21af7b1 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -13,24 +13,29 @@
*
*/
-#include <linux/module.h>
+#define dev_fmt(fmt) "pciehp: " fmt
+
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/pci.h>
-#include "../pci.h"
#include "pciehp.h"
/* The following routines constitute the bulk of the
hotplug controller logic
*/
-static void set_slot_off(struct controller *ctrl, struct slot *pslot)
+#define SAFE_REMOVAL true
+#define SURPRISE_REMOVAL false
+
+static void set_slot_off(struct controller *ctrl)
{
- /* turn off slot, turn on Amber LED, turn off Green LED if supported*/
+ /*
+ * Turn off slot, turn on attention indicator, turn off power
+ * indicator
+ */
if (POWER_CTRL(ctrl)) {
- pciehp_power_off_slot(pslot);
+ pciehp_power_off_slot(ctrl);
/*
* After turning power off, we must wait for at least 1 second
@@ -40,31 +45,31 @@
msleep(1000);
}
- pciehp_green_led_off(pslot);
- pciehp_set_attention_status(pslot, 1);
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
+ PCI_EXP_SLTCTL_ATTN_IND_ON);
}
/**
* board_added - Called after a board has been added to the system.
- * @p_slot: &slot where board is added
+ * @ctrl: PCIe hotplug controller where board is added
*
* Turns power on for the board.
* Configures board.
*/
-static int board_added(struct slot *p_slot)
+static int board_added(struct controller *ctrl)
{
int retval = 0;
- struct controller *ctrl = p_slot->ctrl;
struct pci_bus *parent = ctrl->pcie->port->subordinate;
if (POWER_CTRL(ctrl)) {
/* Power on slot */
- retval = pciehp_power_on_slot(p_slot);
+ retval = pciehp_power_on_slot(ctrl);
if (retval)
return retval;
}
- pciehp_green_led_blink(p_slot);
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
+ INDICATOR_NOOP);
/* Check link training status */
retval = pciehp_check_link_status(ctrl);
@@ -74,13 +79,13 @@
}
/* Check for a power fault */
- if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) {
- ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(p_slot));
+ if (ctrl->power_fault_detected || pciehp_query_power_fault(ctrl)) {
+ ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl));
retval = -EIO;
goto err_exit;
}
- retval = pciehp_configure_device(p_slot);
+ retval = pciehp_configure_device(ctrl);
if (retval) {
if (retval != -EEXIST) {
ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
@@ -89,27 +94,26 @@
}
}
- pciehp_green_led_on(p_slot);
- pciehp_set_attention_status(p_slot, 0);
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON,
+ PCI_EXP_SLTCTL_ATTN_IND_OFF);
return 0;
err_exit:
- set_slot_off(ctrl, p_slot);
+ set_slot_off(ctrl);
return retval;
}
/**
- * remove_board - Turns off slot and LEDs
- * @p_slot: slot where board is being removed
+ * remove_board - Turn off slot and Power Indicator
+ * @ctrl: PCIe hotplug controller where board is being removed
+ * @safe_removal: whether the board is safely removed (versus surprise removed)
*/
-static void remove_board(struct slot *p_slot)
+static void remove_board(struct controller *ctrl, bool safe_removal)
{
- struct controller *ctrl = p_slot->ctrl;
-
- pciehp_unconfigure_device(p_slot);
+ pciehp_unconfigure_device(ctrl, safe_removal);
if (POWER_CTRL(ctrl)) {
- pciehp_power_off_slot(p_slot);
+ pciehp_power_off_slot(ctrl);
/*
* After turning power off, we must wait for at least 1 second
@@ -117,14 +121,18 @@
* removed from the slot/adapter.
*/
msleep(1000);
+
+ /* Ignore link or presence changes caused by power off */
+ atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC),
+ &ctrl->pending_events);
}
- /* turn off Green LED */
- pciehp_green_led_off(p_slot);
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
+ INDICATOR_NOOP);
}
-static int pciehp_enable_slot(struct slot *slot);
-static int pciehp_disable_slot(struct slot *slot);
+static int pciehp_enable_slot(struct controller *ctrl);
+static int pciehp_disable_slot(struct controller *ctrl, bool safe_removal);
void pciehp_request(struct controller *ctrl, int action)
{
@@ -135,11 +143,11 @@
void pciehp_queue_pushbutton_work(struct work_struct *work)
{
- struct slot *p_slot = container_of(work, struct slot, work.work);
- struct controller *ctrl = p_slot->ctrl;
+ struct controller *ctrl = container_of(work, struct controller,
+ button_work.work);
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
+ mutex_lock(&ctrl->state_lock);
+ switch (ctrl->state) {
case BLINKINGOFF_STATE:
pciehp_request(ctrl, DISABLE_SLOT);
break;
@@ -149,30 +157,28 @@
default:
break;
}
- mutex_unlock(&p_slot->lock);
+ mutex_unlock(&ctrl->state_lock);
}
-void pciehp_handle_button_press(struct slot *p_slot)
+void pciehp_handle_button_press(struct controller *ctrl)
{
- struct controller *ctrl = p_slot->ctrl;
-
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
+ mutex_lock(&ctrl->state_lock);
+ switch (ctrl->state) {
case OFF_STATE:
case ON_STATE:
- if (p_slot->state == ON_STATE) {
- p_slot->state = BLINKINGOFF_STATE;
+ if (ctrl->state == ON_STATE) {
+ ctrl->state = BLINKINGOFF_STATE;
ctrl_info(ctrl, "Slot(%s): Powering off due to button press\n",
- slot_name(p_slot));
+ slot_name(ctrl));
} else {
- p_slot->state = BLINKINGON_STATE;
+ ctrl->state = BLINKINGON_STATE;
ctrl_info(ctrl, "Slot(%s) Powering on due to button press\n",
- slot_name(p_slot));
+ slot_name(ctrl));
}
- /* blink green LED and turn off amber */
- pciehp_green_led_blink(p_slot);
- pciehp_set_attention_status(p_slot, 0);
- schedule_delayed_work(&p_slot->work, 5 * HZ);
+ /* blink power indicator and turn off attention */
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK,
+ PCI_EXP_SLTCTL_ATTN_IND_OFF);
+ schedule_delayed_work(&ctrl->button_work, 5 * HZ);
break;
case BLINKINGOFF_STATE:
case BLINKINGON_STATE:
@@ -181,197 +187,187 @@
* press the attention again before the 5 sec. limit
* expires to cancel hot-add or hot-remove
*/
- ctrl_info(ctrl, "Slot(%s): Button cancel\n", slot_name(p_slot));
- cancel_delayed_work(&p_slot->work);
- if (p_slot->state == BLINKINGOFF_STATE) {
- p_slot->state = ON_STATE;
- pciehp_green_led_on(p_slot);
+ ctrl_info(ctrl, "Slot(%s): Button cancel\n", slot_name(ctrl));
+ cancel_delayed_work(&ctrl->button_work);
+ if (ctrl->state == BLINKINGOFF_STATE) {
+ ctrl->state = ON_STATE;
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON,
+ PCI_EXP_SLTCTL_ATTN_IND_OFF);
} else {
- p_slot->state = OFF_STATE;
- pciehp_green_led_off(p_slot);
+ ctrl->state = OFF_STATE;
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
+ PCI_EXP_SLTCTL_ATTN_IND_OFF);
}
- pciehp_set_attention_status(p_slot, 0);
ctrl_info(ctrl, "Slot(%s): Action canceled due to button press\n",
- slot_name(p_slot));
+ slot_name(ctrl));
break;
default:
ctrl_err(ctrl, "Slot(%s): Ignoring invalid state %#x\n",
- slot_name(p_slot), p_slot->state);
+ slot_name(ctrl), ctrl->state);
break;
}
- mutex_unlock(&p_slot->lock);
+ mutex_unlock(&ctrl->state_lock);
}
-void pciehp_handle_disable_request(struct slot *slot)
+void pciehp_handle_disable_request(struct controller *ctrl)
{
- struct controller *ctrl = slot->ctrl;
-
- mutex_lock(&slot->lock);
- switch (slot->state) {
+ mutex_lock(&ctrl->state_lock);
+ switch (ctrl->state) {
case BLINKINGON_STATE:
case BLINKINGOFF_STATE:
- cancel_delayed_work(&slot->work);
+ cancel_delayed_work(&ctrl->button_work);
break;
}
- slot->state = POWEROFF_STATE;
- mutex_unlock(&slot->lock);
+ ctrl->state = POWEROFF_STATE;
+ mutex_unlock(&ctrl->state_lock);
- ctrl->request_result = pciehp_disable_slot(slot);
+ ctrl->request_result = pciehp_disable_slot(ctrl, SAFE_REMOVAL);
}
-void pciehp_handle_presence_or_link_change(struct slot *slot, u32 events)
+void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events)
{
- struct controller *ctrl = slot->ctrl;
- bool link_active;
- u8 present;
+ bool present, link_active;
/*
* If the slot is on and presence or link has changed, turn it off.
* Even if it's occupied again, we cannot assume the card is the same.
*/
- mutex_lock(&slot->lock);
- switch (slot->state) {
+ mutex_lock(&ctrl->state_lock);
+ switch (ctrl->state) {
case BLINKINGOFF_STATE:
- cancel_delayed_work(&slot->work);
+ cancel_delayed_work(&ctrl->button_work);
/* fall through */
case ON_STATE:
- slot->state = POWEROFF_STATE;
- mutex_unlock(&slot->lock);
+ ctrl->state = POWEROFF_STATE;
+ mutex_unlock(&ctrl->state_lock);
if (events & PCI_EXP_SLTSTA_DLLSC)
ctrl_info(ctrl, "Slot(%s): Link Down\n",
- slot_name(slot));
+ slot_name(ctrl));
if (events & PCI_EXP_SLTSTA_PDC)
ctrl_info(ctrl, "Slot(%s): Card not present\n",
- slot_name(slot));
- pciehp_disable_slot(slot);
+ slot_name(ctrl));
+ pciehp_disable_slot(ctrl, SURPRISE_REMOVAL);
break;
default:
- mutex_unlock(&slot->lock);
+ mutex_unlock(&ctrl->state_lock);
break;
}
/* Turn the slot on if it's occupied or link is up */
- mutex_lock(&slot->lock);
- pciehp_get_adapter_status(slot, &present);
+ mutex_lock(&ctrl->state_lock);
+ present = pciehp_card_present(ctrl);
link_active = pciehp_check_link_active(ctrl);
if (!present && !link_active) {
- mutex_unlock(&slot->lock);
+ mutex_unlock(&ctrl->state_lock);
return;
}
- switch (slot->state) {
+ switch (ctrl->state) {
case BLINKINGON_STATE:
- cancel_delayed_work(&slot->work);
+ cancel_delayed_work(&ctrl->button_work);
/* fall through */
case OFF_STATE:
- slot->state = POWERON_STATE;
- mutex_unlock(&slot->lock);
+ ctrl->state = POWERON_STATE;
+ mutex_unlock(&ctrl->state_lock);
if (present)
ctrl_info(ctrl, "Slot(%s): Card present\n",
- slot_name(slot));
+ slot_name(ctrl));
if (link_active)
ctrl_info(ctrl, "Slot(%s): Link Up\n",
- slot_name(slot));
- ctrl->request_result = pciehp_enable_slot(slot);
+ slot_name(ctrl));
+ ctrl->request_result = pciehp_enable_slot(ctrl);
break;
default:
- mutex_unlock(&slot->lock);
+ mutex_unlock(&ctrl->state_lock);
break;
}
}
-static int __pciehp_enable_slot(struct slot *p_slot)
+static int __pciehp_enable_slot(struct controller *ctrl)
{
u8 getstatus = 0;
- struct controller *ctrl = p_slot->ctrl;
- pciehp_get_adapter_status(p_slot, &getstatus);
- if (!getstatus) {
- ctrl_info(ctrl, "Slot(%s): No adapter\n", slot_name(p_slot));
- return -ENODEV;
- }
- if (MRL_SENS(p_slot->ctrl)) {
- pciehp_get_latch_status(p_slot, &getstatus);
+ if (MRL_SENS(ctrl)) {
+ pciehp_get_latch_status(ctrl, &getstatus);
if (getstatus) {
ctrl_info(ctrl, "Slot(%s): Latch open\n",
- slot_name(p_slot));
+ slot_name(ctrl));
return -ENODEV;
}
}
- if (POWER_CTRL(p_slot->ctrl)) {
- pciehp_get_power_status(p_slot, &getstatus);
+ if (POWER_CTRL(ctrl)) {
+ pciehp_get_power_status(ctrl, &getstatus);
if (getstatus) {
ctrl_info(ctrl, "Slot(%s): Already enabled\n",
- slot_name(p_slot));
+ slot_name(ctrl));
return 0;
}
}
- return board_added(p_slot);
+ return board_added(ctrl);
}
-static int pciehp_enable_slot(struct slot *slot)
+static int pciehp_enable_slot(struct controller *ctrl)
{
- struct controller *ctrl = slot->ctrl;
int ret;
pm_runtime_get_sync(&ctrl->pcie->port->dev);
- ret = __pciehp_enable_slot(slot);
+ ret = __pciehp_enable_slot(ctrl);
if (ret && ATTN_BUTTN(ctrl))
- pciehp_green_led_off(slot); /* may be blinking */
+ /* may be blinking */
+ pciehp_set_indicators(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF,
+ INDICATOR_NOOP);
pm_runtime_put(&ctrl->pcie->port->dev);
- mutex_lock(&slot->lock);
- slot->state = ret ? OFF_STATE : ON_STATE;
- mutex_unlock(&slot->lock);
+ mutex_lock(&ctrl->state_lock);
+ ctrl->state = ret ? OFF_STATE : ON_STATE;
+ mutex_unlock(&ctrl->state_lock);
return ret;
}
-static int __pciehp_disable_slot(struct slot *p_slot)
+static int __pciehp_disable_slot(struct controller *ctrl, bool safe_removal)
{
u8 getstatus = 0;
- struct controller *ctrl = p_slot->ctrl;
- if (POWER_CTRL(p_slot->ctrl)) {
- pciehp_get_power_status(p_slot, &getstatus);
+ if (POWER_CTRL(ctrl)) {
+ pciehp_get_power_status(ctrl, &getstatus);
if (!getstatus) {
ctrl_info(ctrl, "Slot(%s): Already disabled\n",
- slot_name(p_slot));
+ slot_name(ctrl));
return -EINVAL;
}
}
- remove_board(p_slot);
+ remove_board(ctrl, safe_removal);
return 0;
}
-static int pciehp_disable_slot(struct slot *slot)
+static int pciehp_disable_slot(struct controller *ctrl, bool safe_removal)
{
- struct controller *ctrl = slot->ctrl;
int ret;
pm_runtime_get_sync(&ctrl->pcie->port->dev);
- ret = __pciehp_disable_slot(slot);
+ ret = __pciehp_disable_slot(ctrl, safe_removal);
pm_runtime_put(&ctrl->pcie->port->dev);
- mutex_lock(&slot->lock);
- slot->state = OFF_STATE;
- mutex_unlock(&slot->lock);
+ mutex_lock(&ctrl->state_lock);
+ ctrl->state = OFF_STATE;
+ mutex_unlock(&ctrl->state_lock);
return ret;
}
-int pciehp_sysfs_enable_slot(struct slot *p_slot)
+int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot)
{
- struct controller *ctrl = p_slot->ctrl;
+ struct controller *ctrl = to_ctrl(hotplug_slot);
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
+ mutex_lock(&ctrl->state_lock);
+ switch (ctrl->state) {
case BLINKINGON_STATE:
case OFF_STATE:
- mutex_unlock(&p_slot->lock);
+ mutex_unlock(&ctrl->state_lock);
/*
* The IRQ thread becomes a no-op if the user pulls out the
* card before the thread wakes up, so initialize to -ENODEV.
@@ -383,53 +379,53 @@
return ctrl->request_result;
case POWERON_STATE:
ctrl_info(ctrl, "Slot(%s): Already in powering on state\n",
- slot_name(p_slot));
+ slot_name(ctrl));
break;
case BLINKINGOFF_STATE:
case ON_STATE:
case POWEROFF_STATE:
ctrl_info(ctrl, "Slot(%s): Already enabled\n",
- slot_name(p_slot));
+ slot_name(ctrl));
break;
default:
ctrl_err(ctrl, "Slot(%s): Invalid state %#x\n",
- slot_name(p_slot), p_slot->state);
+ slot_name(ctrl), ctrl->state);
break;
}
- mutex_unlock(&p_slot->lock);
+ mutex_unlock(&ctrl->state_lock);
return -ENODEV;
}
-int pciehp_sysfs_disable_slot(struct slot *p_slot)
+int pciehp_sysfs_disable_slot(struct hotplug_slot *hotplug_slot)
{
- struct controller *ctrl = p_slot->ctrl;
+ struct controller *ctrl = to_ctrl(hotplug_slot);
- mutex_lock(&p_slot->lock);
- switch (p_slot->state) {
+ mutex_lock(&ctrl->state_lock);
+ switch (ctrl->state) {
case BLINKINGOFF_STATE:
case ON_STATE:
- mutex_unlock(&p_slot->lock);
+ mutex_unlock(&ctrl->state_lock);
pciehp_request(ctrl, DISABLE_SLOT);
wait_event(ctrl->requester,
!atomic_read(&ctrl->pending_events));
return ctrl->request_result;
case POWEROFF_STATE:
ctrl_info(ctrl, "Slot(%s): Already in powering off state\n",
- slot_name(p_slot));
+ slot_name(ctrl));
break;
case BLINKINGON_STATE:
case OFF_STATE:
case POWERON_STATE:
ctrl_info(ctrl, "Slot(%s): Already disabled\n",
- slot_name(p_slot));
+ slot_name(ctrl));
break;
default:
ctrl_err(ctrl, "Slot(%s): Invalid state %#x\n",
- slot_name(p_slot), p_slot->state);
+ slot_name(ctrl), ctrl->state);
break;
}
- mutex_unlock(&p_slot->lock);
+ mutex_unlock(&ctrl->state_lock);
return -ENODEV;
}