Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
new file mode 100644
index 0000000..cf5a391
--- /dev/null
+++ b/drivers/net/phy/adin.c
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0+
+/**
+ * Driver for Analog Devices Industrial Ethernet PHYs
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/property.h>
+
+#define PHY_ID_ADIN1200 0x0283bc20
+#define PHY_ID_ADIN1300 0x0283bc30
+
+#define ADIN1300_MII_EXT_REG_PTR 0x0010
+#define ADIN1300_MII_EXT_REG_DATA 0x0011
+
+#define ADIN1300_PHY_CTRL1 0x0012
+#define ADIN1300_AUTO_MDI_EN BIT(10)
+#define ADIN1300_MAN_MDIX_EN BIT(9)
+
+#define ADIN1300_RX_ERR_CNT 0x0014
+
+#define ADIN1300_PHY_CTRL_STATUS2 0x0015
+#define ADIN1300_NRG_PD_EN BIT(3)
+#define ADIN1300_NRG_PD_TX_EN BIT(2)
+#define ADIN1300_NRG_PD_STATUS BIT(1)
+
+#define ADIN1300_PHY_CTRL2 0x0016
+#define ADIN1300_DOWNSPEED_AN_100_EN BIT(11)
+#define ADIN1300_DOWNSPEED_AN_10_EN BIT(10)
+#define ADIN1300_GROUP_MDIO_EN BIT(6)
+#define ADIN1300_DOWNSPEEDS_EN \
+ (ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN)
+
+#define ADIN1300_PHY_CTRL3 0x0017
+#define ADIN1300_LINKING_EN BIT(13)
+#define ADIN1300_DOWNSPEED_RETRIES_MSK GENMASK(12, 10)
+
+#define ADIN1300_INT_MASK_REG 0x0018
+#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
+#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
+#define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6)
+#define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5)
+#define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4)
+#define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3)
+#define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2)
+#define ADIN1300_INT_SPEED_CHNG_EN BIT(1)
+#define ADIN1300_INT_HW_IRQ_EN BIT(0)
+#define ADIN1300_INT_MASK_EN \
+ (ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
+#define ADIN1300_INT_STATUS_REG 0x0019
+
+#define ADIN1300_PHY_STATUS1 0x001a
+#define ADIN1300_PAIR_01_SWAP BIT(11)
+
+/* EEE register addresses, accessible via Clause 22 access using
+ * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA.
+ * The bit-fields are the same as specified by IEEE for EEE.
+ */
+#define ADIN1300_EEE_CAP_REG 0x8000
+#define ADIN1300_EEE_ADV_REG 0x8001
+#define ADIN1300_EEE_LPABLE_REG 0x8002
+#define ADIN1300_CLOCK_STOP_REG 0x9400
+#define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000
+
+#define ADIN1300_GE_SOFT_RESET_REG 0xff0c
+#define ADIN1300_GE_SOFT_RESET BIT(0)
+
+#define ADIN1300_GE_RGMII_CFG_REG 0xff23
+#define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6)
+#define ADIN1300_GE_RGMII_RX_SEL(x) \
+ FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x)
+#define ADIN1300_GE_RGMII_GTX_MSK GENMASK(5, 3)
+#define ADIN1300_GE_RGMII_GTX_SEL(x) \
+ FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x)
+#define ADIN1300_GE_RGMII_RXID_EN BIT(2)
+#define ADIN1300_GE_RGMII_TXID_EN BIT(1)
+#define ADIN1300_GE_RGMII_EN BIT(0)
+
+/* RGMII internal delay settings for rx and tx for ADIN1300 */
+#define ADIN1300_RGMII_1_60_NS 0x0001
+#define ADIN1300_RGMII_1_80_NS 0x0002
+#define ADIN1300_RGMII_2_00_NS 0x0000
+#define ADIN1300_RGMII_2_20_NS 0x0006
+#define ADIN1300_RGMII_2_40_NS 0x0007
+
+#define ADIN1300_GE_RMII_CFG_REG 0xff24
+#define ADIN1300_GE_RMII_FIFO_DEPTH_MSK GENMASK(6, 4)
+#define ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x) \
+ FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x)
+#define ADIN1300_GE_RMII_EN BIT(0)
+
+/* RMII fifo depth values */
+#define ADIN1300_RMII_4_BITS 0x0000
+#define ADIN1300_RMII_8_BITS 0x0001
+#define ADIN1300_RMII_12_BITS 0x0002
+#define ADIN1300_RMII_16_BITS 0x0003
+#define ADIN1300_RMII_20_BITS 0x0004
+#define ADIN1300_RMII_24_BITS 0x0005
+
+/**
+ * struct adin_cfg_reg_map - map a config value to aregister value
+ * @cfg value in device configuration
+ * @reg value in the register
+ */
+struct adin_cfg_reg_map {
+ int cfg;
+ int reg;
+};
+
+static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
+ { 1600, ADIN1300_RGMII_1_60_NS },
+ { 1800, ADIN1300_RGMII_1_80_NS },
+ { 2000, ADIN1300_RGMII_2_00_NS },
+ { 2200, ADIN1300_RGMII_2_20_NS },
+ { 2400, ADIN1300_RGMII_2_40_NS },
+ { },
+};
+
+static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = {
+ { 4, ADIN1300_RMII_4_BITS },
+ { 8, ADIN1300_RMII_8_BITS },
+ { 12, ADIN1300_RMII_12_BITS },
+ { 16, ADIN1300_RMII_16_BITS },
+ { 20, ADIN1300_RMII_20_BITS },
+ { 24, ADIN1300_RMII_24_BITS },
+ { },
+};
+
+/**
+ * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22
+ * @devad device address used in Clause 45 access
+ * @cl45_regnum register address defined by Clause 45
+ * @adin_regnum equivalent register address accessible via Clause 22
+ */
+struct adin_clause45_mmd_map {
+ int devad;
+ u16 cl45_regnum;
+ u16 adin_regnum;
+};
+
+static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
+ { MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE, ADIN1300_EEE_CAP_REG },
+ { MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, ADIN1300_EEE_LPABLE_REG },
+ { MDIO_MMD_AN, MDIO_AN_EEE_ADV, ADIN1300_EEE_ADV_REG },
+ { MDIO_MMD_PCS, MDIO_CTRL1, ADIN1300_CLOCK_STOP_REG },
+ { MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG },
+};
+
+struct adin_hw_stat {
+ const char *string;
+ u16 reg1;
+ u16 reg2;
+};
+
+static struct adin_hw_stat adin_hw_stats[] = {
+ { "total_frames_checked_count", 0x940A, 0x940B }, /* hi + lo */
+ { "length_error_frames_count", 0x940C },
+ { "alignment_error_frames_count", 0x940D },
+ { "symbol_error_count", 0x940E },
+ { "oversized_frames_count", 0x940F },
+ { "undersized_frames_count", 0x9410 },
+ { "odd_nibble_frames_count", 0x9411 },
+ { "odd_preamble_packet_count", 0x9412 },
+ { "dribble_bits_frames_count", 0x9413 },
+ { "false_carrier_events_count", 0x9414 },
+};
+
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * stats statistic counters for the PHY
+ */
+struct adin_priv {
+ u64 stats[ARRAY_SIZE(adin_hw_stats)];
+};
+
+static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
+{
+ size_t i;
+
+ for (i = 0; tbl[i].cfg; i++) {
+ if (tbl[i].cfg == cfg)
+ return tbl[i].reg;
+ }
+
+ return -EINVAL;
+}
+
+static u32 adin_get_reg_value(struct phy_device *phydev,
+ const char *prop_name,
+ const struct adin_cfg_reg_map *tbl,
+ u32 dflt)
+{
+ struct device *dev = &phydev->mdio.dev;
+ u32 val;
+ int rc;
+
+ if (device_property_read_u32(dev, prop_name, &val))
+ return dflt;
+
+ rc = adin_lookup_reg_value(tbl, val);
+ if (rc < 0) {
+ phydev_warn(phydev,
+ "Unsupported value %u for %s using default (%u)\n",
+ val, prop_name, dflt);
+ return dflt;
+ }
+
+ return rc;
+}
+
+static int adin_config_rgmii_mode(struct phy_device *phydev)
+{
+ u32 val;
+ int reg;
+
+ if (!phy_interface_is_rgmii(phydev))
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RGMII_CFG_REG,
+ ADIN1300_GE_RGMII_EN);
+
+ reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG);
+ if (reg < 0)
+ return reg;
+
+ reg |= ADIN1300_GE_RGMII_EN;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+ reg |= ADIN1300_GE_RGMII_RXID_EN;
+
+ val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps",
+ adin_rgmii_delays,
+ ADIN1300_RGMII_2_00_NS);
+ reg &= ~ADIN1300_GE_RGMII_RX_MSK;
+ reg |= ADIN1300_GE_RGMII_RX_SEL(val);
+ } else {
+ reg &= ~ADIN1300_GE_RGMII_RXID_EN;
+ }
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+ reg |= ADIN1300_GE_RGMII_TXID_EN;
+
+ val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps",
+ adin_rgmii_delays,
+ ADIN1300_RGMII_2_00_NS);
+ reg &= ~ADIN1300_GE_RGMII_GTX_MSK;
+ reg |= ADIN1300_GE_RGMII_GTX_SEL(val);
+ } else {
+ reg &= ~ADIN1300_GE_RGMII_TXID_EN;
+ }
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RGMII_CFG_REG, reg);
+}
+
+static int adin_config_rmii_mode(struct phy_device *phydev)
+{
+ u32 val;
+ int reg;
+
+ if (phydev->interface != PHY_INTERFACE_MODE_RMII)
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RMII_CFG_REG,
+ ADIN1300_GE_RMII_EN);
+
+ reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG);
+ if (reg < 0)
+ return reg;
+
+ reg |= ADIN1300_GE_RMII_EN;
+
+ val = adin_get_reg_value(phydev, "adi,fifo-depth-bits",
+ adin_rmii_fifo_depths,
+ ADIN1300_RMII_8_BITS);
+
+ reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK;
+ reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val);
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_RMII_CFG_REG, reg);
+}
+
+static int adin_get_downshift(struct phy_device *phydev, u8 *data)
+{
+ int val, cnt, enable;
+
+ val = phy_read(phydev, ADIN1300_PHY_CTRL2);
+ if (val < 0)
+ return val;
+
+ cnt = phy_read(phydev, ADIN1300_PHY_CTRL3);
+ if (cnt < 0)
+ return cnt;
+
+ enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val);
+ cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
+
+ *data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE;
+
+ return 0;
+}
+
+static int adin_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+ u16 val;
+ int rc;
+
+ if (cnt == DOWNSHIFT_DEV_DISABLE)
+ return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2,
+ ADIN1300_DOWNSPEEDS_EN);
+
+ if (cnt > 7)
+ return -E2BIG;
+
+ val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
+ val |= ADIN1300_LINKING_EN;
+
+ rc = phy_modify(phydev, ADIN1300_PHY_CTRL3,
+ ADIN1300_LINKING_EN | ADIN1300_DOWNSPEED_RETRIES_MSK,
+ val);
+ if (rc < 0)
+ return rc;
+
+ return phy_set_bits(phydev, ADIN1300_PHY_CTRL2,
+ ADIN1300_DOWNSPEEDS_EN);
+}
+
+static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval)
+{
+ int val;
+
+ val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2);
+ if (val < 0)
+ return val;
+
+ if (ADIN1300_NRG_PD_EN & val) {
+ if (val & ADIN1300_NRG_PD_TX_EN)
+ /* default is 1 second */
+ *tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS;
+ else
+ *tx_interval = ETHTOOL_PHY_EDPD_NO_TX;
+ } else {
+ *tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
+ }
+
+ return 0;
+}
+
+static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval)
+{
+ u16 val;
+
+ if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
+ return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
+ (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));
+
+ val = ADIN1300_NRG_PD_EN;
+
+ switch (tx_interval) {
+ case 1000: /* 1 second */
+ /* fallthrough */
+ case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
+ val |= ADIN1300_NRG_PD_TX_EN;
+ /* fallthrough */
+ case ETHTOOL_PHY_EDPD_NO_TX:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2,
+ (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN),
+ val);
+}
+
+static int adin_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return adin_get_downshift(phydev, data);
+ case ETHTOOL_PHY_EDPD:
+ return adin_get_edpd(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int adin_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return adin_set_downshift(phydev, *(const u8 *)data);
+ case ETHTOOL_PHY_EDPD:
+ return adin_set_edpd(phydev, *(const u16 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int adin_config_init(struct phy_device *phydev)
+{
+ int rc;
+
+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
+ rc = adin_config_rgmii_mode(phydev);
+ if (rc < 0)
+ return rc;
+
+ rc = adin_config_rmii_mode(phydev);
+ if (rc < 0)
+ return rc;
+
+ rc = adin_set_downshift(phydev, 4);
+ if (rc < 0)
+ return rc;
+
+ rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+ if (rc < 0)
+ return rc;
+
+ phydev_dbg(phydev, "PHY is using mode '%s'\n",
+ phy_modes(phydev->interface));
+
+ return 0;
+}
+
+static int adin_phy_ack_intr(struct phy_device *phydev)
+{
+ /* Clear pending interrupts */
+ int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG);
+
+ return rc < 0 ? rc : 0;
+}
+
+static int adin_phy_config_intr(struct phy_device *phydev)
+{
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ return phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
+ ADIN1300_INT_MASK_EN);
+
+ return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
+ ADIN1300_INT_MASK_EN);
+}
+
+static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad,
+ u16 cl45_regnum)
+{
+ struct adin_clause45_mmd_map *m;
+ int i;
+
+ if (devad == MDIO_MMD_VEND1)
+ return cl45_regnum;
+
+ for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) {
+ m = &adin_clause45_mmd_map[i];
+ if (m->devad == devad && m->cl45_regnum == cl45_regnum)
+ return m->adin_regnum;
+ }
+
+ phydev_err(phydev,
+ "No translation available for devad: %d reg: %04x\n",
+ devad, cl45_regnum);
+
+ return -EINVAL;
+}
+
+static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+ int adin_regnum;
+ int err;
+
+ adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
+ if (adin_regnum < 0)
+ return adin_regnum;
+
+ err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
+ adin_regnum);
+ if (err)
+ return err;
+
+ return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
+}
+
+static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
+ u16 val)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int phy_addr = phydev->mdio.addr;
+ int adin_regnum;
+ int err;
+
+ adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
+ if (adin_regnum < 0)
+ return adin_regnum;
+
+ err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
+ adin_regnum);
+ if (err)
+ return err;
+
+ return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
+}
+
+static int adin_config_mdix(struct phy_device *phydev)
+{
+ bool auto_en, mdix_en;
+ int reg;
+
+ mdix_en = false;
+ auto_en = false;
+ switch (phydev->mdix_ctrl) {
+ case ETH_TP_MDI:
+ break;
+ case ETH_TP_MDI_X:
+ mdix_en = true;
+ break;
+ case ETH_TP_MDI_AUTO:
+ auto_en = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
+ if (reg < 0)
+ return reg;
+
+ if (mdix_en)
+ reg |= ADIN1300_MAN_MDIX_EN;
+ else
+ reg &= ~ADIN1300_MAN_MDIX_EN;
+
+ if (auto_en)
+ reg |= ADIN1300_AUTO_MDI_EN;
+ else
+ reg &= ~ADIN1300_AUTO_MDI_EN;
+
+ return phy_write(phydev, ADIN1300_PHY_CTRL1, reg);
+}
+
+static int adin_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = adin_config_mdix(phydev);
+ if (ret)
+ return ret;
+
+ return genphy_config_aneg(phydev);
+}
+
+static int adin_mdix_update(struct phy_device *phydev)
+{
+ bool auto_en, mdix_en;
+ bool swapped;
+ int reg;
+
+ reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
+ if (reg < 0)
+ return reg;
+
+ auto_en = !!(reg & ADIN1300_AUTO_MDI_EN);
+ mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN);
+
+ /* If MDI/MDIX is forced, just read it from the control reg */
+ if (!auto_en) {
+ if (mdix_en)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+ return 0;
+ }
+
+ /**
+ * Otherwise, we need to deduce it from the PHY status2 reg.
+ * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies
+ * a preference for MDIX when it is set.
+ */
+ reg = phy_read(phydev, ADIN1300_PHY_STATUS1);
+ if (reg < 0)
+ return reg;
+
+ swapped = !!(reg & ADIN1300_PAIR_01_SWAP);
+
+ if (mdix_en != swapped)
+ phydev->mdix = ETH_TP_MDI_X;
+ else
+ phydev->mdix = ETH_TP_MDI;
+
+ return 0;
+}
+
+static int adin_read_status(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = adin_mdix_update(phydev);
+ if (ret < 0)
+ return ret;
+
+ return genphy_read_status(phydev);
+}
+
+static int adin_soft_reset(struct phy_device *phydev)
+{
+ int rc;
+
+ /* The reset bit is self-clearing, set it and wait */
+ rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_SOFT_RESET_REG,
+ ADIN1300_GE_SOFT_RESET);
+ if (rc < 0)
+ return rc;
+
+ msleep(10);
+
+ /* If we get a read error something may be wrong */
+ rc = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+ ADIN1300_GE_SOFT_RESET_REG);
+
+ return rc < 0 ? rc : 0;
+}
+
+static int adin_get_sset_count(struct phy_device *phydev)
+{
+ return ARRAY_SIZE(adin_hw_stats);
+}
+
+static void adin_get_strings(struct phy_device *phydev, u8 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) {
+ strlcpy(&data[i * ETH_GSTRING_LEN],
+ adin_hw_stats[i].string, ETH_GSTRING_LEN);
+ }
+}
+
+static int adin_read_mmd_stat_regs(struct phy_device *phydev,
+ struct adin_hw_stat *stat,
+ u32 *val)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1);
+ if (ret < 0)
+ return ret;
+
+ *val = (ret & 0xffff);
+
+ if (stat->reg2 == 0)
+ return 0;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2);
+ if (ret < 0)
+ return ret;
+
+ *val <<= 16;
+ *val |= (ret & 0xffff);
+
+ return 0;
+}
+
+static u64 adin_get_stat(struct phy_device *phydev, int i)
+{
+ struct adin_hw_stat *stat = &adin_hw_stats[i];
+ struct adin_priv *priv = phydev->priv;
+ u32 val;
+ int ret;
+
+ if (stat->reg1 > 0x1f) {
+ ret = adin_read_mmd_stat_regs(phydev, stat, &val);
+ if (ret < 0)
+ return (u64)(~0);
+ } else {
+ ret = phy_read(phydev, stat->reg1);
+ if (ret < 0)
+ return (u64)(~0);
+ val = (ret & 0xffff);
+ }
+
+ priv->stats[i] += val;
+
+ return priv->stats[i];
+}
+
+static void adin_get_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ int i, rc;
+
+ /* latch copies of all the frame-checker counters */
+ rc = phy_read(phydev, ADIN1300_RX_ERR_CNT);
+ if (rc < 0)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
+ data[i] = adin_get_stat(phydev, i);
+}
+
+static int adin_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct adin_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static struct phy_driver adin_driver[] = {
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
+ .name = "ADIN1200",
+ .probe = adin_probe,
+ .config_init = adin_config_init,
+ .soft_reset = adin_soft_reset,
+ .config_aneg = adin_config_aneg,
+ .read_status = adin_read_status,
+ .get_tunable = adin_get_tunable,
+ .set_tunable = adin_set_tunable,
+ .ack_interrupt = adin_phy_ack_intr,
+ .config_intr = adin_phy_config_intr,
+ .get_sset_count = adin_get_sset_count,
+ .get_strings = adin_get_strings,
+ .get_stats = adin_get_stats,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
+ .read_mmd = adin_read_mmd,
+ .write_mmd = adin_write_mmd,
+ },
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
+ .name = "ADIN1300",
+ .probe = adin_probe,
+ .config_init = adin_config_init,
+ .soft_reset = adin_soft_reset,
+ .config_aneg = adin_config_aneg,
+ .read_status = adin_read_status,
+ .get_tunable = adin_get_tunable,
+ .set_tunable = adin_set_tunable,
+ .ack_interrupt = adin_phy_ack_intr,
+ .config_intr = adin_phy_config_intr,
+ .get_sset_count = adin_get_sset_count,
+ .get_strings = adin_get_strings,
+ .get_stats = adin_get_stats,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
+ .read_mmd = adin_read_mmd,
+ .write_mmd = adin_write_mmd,
+ },
+};
+
+module_phy_driver(adin_driver);
+
+static struct mdio_device_id __maybe_unused adin_tbl[] = {
+ { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin_tbl);
+MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
+MODULE_LICENSE("GPL");