Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index d79a69d..23281ae 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* 6pack.c This module implements the 6pack protocol for kernel-based
* devices like TTY. It interfaces between a raw TTY and the
@@ -34,7 +35,6 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/semaphore.h>
-#include <linux/compat.h>
#include <linux/refcount.h>
#define SIXPACK_VERSION "Revision: 0.3.0"
@@ -121,7 +121,7 @@
struct timer_list tx_t;
struct timer_list resync_t;
refcount_t refcnt;
- struct semaphore dead_sem;
+ struct completion dead;
spinlock_t lock;
};
@@ -344,10 +344,10 @@
sp->dev->stats.rx_bytes += count;
- if ((skb = dev_alloc_skb(count)) == NULL)
+ if ((skb = dev_alloc_skb(count + 1)) == NULL)
goto out_mem;
- ptr = skb_put(skb, count);
+ ptr = skb_put(skb, count + 1);
*ptr++ = cmd; /* KISS command */
memcpy(ptr, sp->cooked_buf + 1, count);
@@ -390,7 +390,7 @@
static void sp_put(struct sixpack *sp)
{
if (refcount_dec_and_test(&sp->refcnt))
- up(&sp->dead_sem);
+ complete(&sp->dead);
}
/*
@@ -524,10 +524,7 @@
/* Start resync timer again -- the TNC might be still absent */
-
- del_timer(&sp->resync_t);
- sp->resync_t.expires = jiffies + SIXP_RESYNC_TIMEOUT;
- add_timer(&sp->resync_t);
+ mod_timer(&sp->resync_t, jiffies + SIXP_RESYNC_TIMEOUT);
}
static inline int tnc_init(struct sixpack *sp)
@@ -538,9 +535,7 @@
sp->tty->ops->write(sp->tty, &inbyte, 1);
- del_timer(&sp->resync_t);
- sp->resync_t.expires = jiffies + SIXP_RESYNC_TIMEOUT;
- add_timer(&sp->resync_t);
+ mod_timer(&sp->resync_t, jiffies + SIXP_RESYNC_TIMEOUT);
return 0;
}
@@ -577,7 +572,7 @@
spin_lock_init(&sp->lock);
refcount_set(&sp->refcnt, 1);
- sema_init(&sp->dead_sem, 0);
+ init_completion(&sp->dead);
/* !!! length of the buffers. MTU is IP MTU, not PACLEN! */
@@ -671,10 +666,10 @@
* we have to wait for all existing users to finish.
*/
if (!refcount_dec_and_test(&sp->refcnt))
- down(&sp->dead_sem);
+ wait_for_completion(&sp->dead);
/* We must stop the queue to avoid potentially scribbling
- * on the free buffers. The sp->dead_sem is not sufficient
+ * on the free buffers. The sp->dead completion is not sufficient
* to protect us from sp->xbuff access.
*/
netif_stop_queue(sp->dev);
@@ -752,23 +747,6 @@
return err;
}
-#ifdef CONFIG_COMPAT
-static long sixpack_compat_ioctl(struct tty_struct * tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case SIOCGIFNAME:
- case SIOCGIFENCAP:
- case SIOCSIFENCAP:
- case SIOCSIFHWADDR:
- return sixpack_ioctl(tty, file, cmd,
- (unsigned long)compat_ptr(arg));
- }
-
- return -ENOIOCTLCMD;
-}
-#endif
-
static struct tty_ldisc_ops sp_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
@@ -776,9 +754,6 @@
.open = sixpack_open,
.close = sixpack_close,
.ioctl = sixpack_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = sixpack_compat_ioctl,
-#endif
.receive_buf = sixpack_receive_buf,
.write_wakeup = sixpack_write_wakeup,
};
@@ -918,11 +893,8 @@
/* if the state byte has been received, the TNC is present,
so the resync timer can be reset. */
- if (sp->tnc_state == TNC_IN_SYNC) {
- del_timer(&sp->resync_t);
- sp->resync_t.expires = jiffies + SIXP_INIT_RESYNC_TIMEOUT;
- add_timer(&sp->resync_t);
- }
+ if (sp->tnc_state == TNC_IN_SYNC)
+ mod_timer(&sp->resync_t, jiffies + SIXP_INIT_RESYNC_TIMEOUT);
sp->status1 = cmd & SIXP_PRIO_DATA_MASK;
}
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index bf5e596..8e05b5c 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
config MKISS
tristate "Serial port KISS driver"
depends on AX25 && TTY
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1e62d00..4476491 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*****************************************************************************/
/*
@@ -6,25 +7,10 @@
* Copyright (C) 1998-2000
* Thomas Sailer (sailer@ife.ee.ethz.ch)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
*
- *
* History:
* 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef)
* 0.2 21.04.1998 Massive rework by Thomas Sailer
@@ -35,7 +21,6 @@
* removed some pre-2.2 kernel compatibility cruft
* 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
* 0.7 12.02.2000 adapted to softnet driver interface
- *
*/
/*****************************************************************************/
@@ -515,8 +500,9 @@
}
break;
}
+ /* fall through */
- default: /* fall through */
+ default:
if (bc->hdlctx.calibrate <= 0)
return 0;
i = min_t(int, cnt, bc->hdlctx.calibrate);
@@ -975,8 +961,7 @@
parport_write_control(pp, 0); /* reset the adapter */
parport_release(bc->pdev);
parport_unregister_device(bc->pdev);
- if (bc->skb)
- dev_kfree_skb(bc->skb);
+ dev_kfree_skb(bc->skb);
bc->skb = NULL;
printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
bc_drvname, dev->base_addr, dev->irq);
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 1f7ceaf..6a3dc7b 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*****************************************************************************/
/*
@@ -5,25 +6,10 @@
*
* Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
*
- *
* Supported modems
*
* par96: This is a modem for 9600 baud FSK compatible to the G3RUH standard.
@@ -45,13 +31,11 @@
* built in DCD circuitry. The driver should therefore be configured
* for hardware DCD.
*
- *
* Command line options (insmod command line)
*
* mode driver mode string. Valid choices are par96 and picpar.
* iobase base address of the port; common values are 0x378, 0x278, 0x3bc
*
- *
* History:
* 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
* 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index 190f66c..04bb409 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*****************************************************************************/
/*
@@ -5,25 +6,10 @@
*
* Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
*
- *
* Supported modems
*
* ser12: This is a very simple 1200 baud AFSK modem. The modem consists only
@@ -53,7 +39,6 @@
* baud baud rate (between 300 and 4800)
* irq interrupt line of the port; common values are 4,3
*
- *
* History:
* 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
* 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
@@ -203,32 +188,6 @@
*/
}
-/* --------------------------------------------------------------------- */
-
-#if 0
-static inline unsigned int hweight16(unsigned int w)
- __attribute__ ((unused));
-static inline unsigned int hweight8(unsigned int w)
- __attribute__ ((unused));
-
-static inline unsigned int hweight16(unsigned int w)
-{
- unsigned short res = (w & 0x5555) + ((w >> 1) & 0x5555);
- res = (res & 0x3333) + ((res >> 2) & 0x3333);
- res = (res & 0x0F0F) + ((res >> 4) & 0x0F0F);
- return (res & 0x00FF) + ((res >> 8) & 0x00FF);
-}
-
-static inline unsigned int hweight8(unsigned int w)
-{
- unsigned short res = (w & 0x55) + ((w >> 1) & 0x55);
- res = (res & 0x33) + ((res >> 2) & 0x33);
- return (res & 0x0F) + ((res >> 4) & 0x0F);
-}
-#endif
-
-/* --------------------------------------------------------------------- */
-
static __inline__ void ser12_rx(struct net_device *dev, struct baycom_state *bc, struct timespec64 *ts, unsigned char curs)
{
int timediff;
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 3c823c6..a1acb3a 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*****************************************************************************/
/*
@@ -5,25 +6,10 @@
*
* Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
*
- *
* Supported modems
*
* ser12: This is a very simple 1200 baud AFSK modem. The modem consists only
@@ -34,7 +20,6 @@
* port, the kernel driver for serial ports cannot be used, and this
* driver only supports standard serial hardware (8250, 16450, 16550A)
*
- *
* Command line options (insmod command line)
*
* mode ser12 hardware DCD
@@ -45,7 +30,6 @@
* iobase base address of the port; common values are 0x3f8, 0x2f8, 0x3e8, 0x2e8
* irq interrupt line of the port; common values are 4,3
*
- *
* History:
* 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
* 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 777fa59..fbea6f2 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -1,14 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* G8BPQ compatible "AX.25 via ethernet" driver release 004
*
* This code REQUIRES 2.0.0 or higher/ NET3.029
*
- * This module:
- * This module is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
* This is a "pseudo" network driver to allow AX.25 over Ethernet
* using G8BPQ encapsulation. It has been extracted from the protocol
* implementation because
@@ -112,27 +107,6 @@
static LIST_HEAD(bpq_devices);
-/*
- * bpqether network devices are paired with ethernet devices below them, so
- * form a special "super class" of normal ethernet devices; split their locks
- * off into a separate class since they always nest.
- */
-static struct lock_class_key bpq_netdev_xmit_lock_key;
-static struct lock_class_key bpq_netdev_addr_lock_key;
-
-static void bpq_set_lockdep_class_one(struct net_device *dev,
- struct netdev_queue *txq,
- void *_unused)
-{
- lockdep_set_class(&txq->_xmit_lock, &bpq_netdev_xmit_lock_key);
-}
-
-static void bpq_set_lockdep_class(struct net_device *dev)
-{
- lockdep_set_class(&dev->addr_list_lock, &bpq_netdev_addr_lock_key);
- netdev_for_each_tx_queue(dev, bpq_set_lockdep_class_one, NULL);
-}
-
/* ------------------------------------------------------------------------ */
@@ -503,7 +477,6 @@
err = register_netdevice(ndev);
if (err)
goto error;
- bpq_set_lockdep_class(ndev);
/* List protected by RTNL */
list_add_rcu(&bpq->bpq_list, &bpq_devices);
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index cde4120..c25c8c9 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for high-speed SCC boards (those with DMA support)
* Copyright (C) 1997-2000 Klaus Kudielka
*
* S5SCC/DMA support by Janko Koleznik S52HI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c
index 97e3bc6..df495b5 100644
--- a/drivers/net/hamradio/hdlcdrv.c
+++ b/drivers/net/hamradio/hdlcdrv.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*****************************************************************************/
/*
@@ -5,20 +6,6 @@
*
* Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
@@ -488,8 +475,7 @@
if (s->ops && s->ops->close)
i = s->ops->close(dev);
- if (s->skb)
- dev_kfree_skb(s->skb);
+ dev_kfree_skb(s->skb);
s->skb = NULL;
s->opened = 0;
return i;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 13e4c1e..c5bfa19 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -1,15 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Copyright (C) Hans Alblas PE1AYX <hans@esrac.ele.tue.nl>
* Copyright (C) 2004, 05 Ralf Baechle DL5RB <ralf@linux-mips.org>
@@ -35,7 +25,7 @@
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/jiffies.h>
-#include <linux/compat.h>
+#include <linux/refcount.h>
#include <net/ax25.h>
@@ -81,8 +71,8 @@
#define CRC_MODE_FLEX_TEST 3
#define CRC_MODE_SMACK_TEST 4
- atomic_t refcnt;
- struct semaphore dead_sem;
+ refcount_t refcnt;
+ struct completion dead;
};
/*---------------------------------------------------------------------------*/
@@ -679,7 +669,7 @@
read_lock(&disc_data_lock);
ax = tty->disc_data;
if (ax)
- atomic_inc(&ax->refcnt);
+ refcount_inc(&ax->refcnt);
read_unlock(&disc_data_lock);
return ax;
@@ -687,8 +677,8 @@
static void mkiss_put(struct mkiss *ax)
{
- if (atomic_dec_and_test(&ax->refcnt))
- up(&ax->dead_sem);
+ if (refcount_dec_and_test(&ax->refcnt))
+ complete(&ax->dead);
}
static int crc_force = 0; /* Can be overridden with insmod */
@@ -715,8 +705,8 @@
ax->dev = dev;
spin_lock_init(&ax->buflock);
- atomic_set(&ax->refcnt, 1);
- sema_init(&ax->dead_sem, 0);
+ refcount_set(&ax->refcnt, 1);
+ init_completion(&ax->dead);
ax->tty = tty;
tty->disc_data = ax;
@@ -795,8 +785,8 @@
* We have now ensured that nobody can start using ap from now on, but
* we have to wait for all existing users to finish.
*/
- if (!atomic_dec_and_test(&ax->refcnt))
- down(&ax->dead_sem);
+ if (!refcount_dec_and_test(&ax->refcnt))
+ wait_for_completion(&ax->dead);
/*
* Halt the transmit queue so that a new transmit cannot scribble
* on our buffers
@@ -875,23 +865,6 @@
return err;
}
-#ifdef CONFIG_COMPAT
-static long mkiss_compat_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case SIOCGIFNAME:
- case SIOCGIFENCAP:
- case SIOCSIFENCAP:
- case SIOCSIFHWADDR:
- return mkiss_ioctl(tty, file, cmd,
- (unsigned long)compat_ptr(arg));
- }
-
- return -ENOIOCTLCMD;
-}
-#endif
-
/*
* Handle the 'receiver data ready' interrupt.
* This function is called by the 'tty_io' module in the kernel when
@@ -966,9 +939,6 @@
.open = mkiss_open,
.close = mkiss_close,
.ioctl = mkiss_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = mkiss_compat_ioctl,
-#endif
.receive_buf = mkiss_receive_buf,
.write_wakeup = mkiss_write_wakeup
};
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index ba9df43..71cdef9 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*****************************************************************************/
/*
@@ -6,25 +7,10 @@
* Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
* Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
* Please note that the GPL allows you to use the driver, NOT the radio.
* In order to use the radio, you need a license from the communications
* authority of your country.
*
- *
* History:
* 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3
* 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration
@@ -37,7 +23,6 @@
* 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug
* OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ"
* using dev_kfree_skb_any(). (important in 2.4 kernel)
- *
*/
/*****************************************************************************/