Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index af3432f..cd0a8f4 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
#
# Intel XScale IXP device configuration
#
@@ -12,7 +13,7 @@
Note that the answer to this question does not directly affect the
kernel: saying N will just cause the configurator to skip all
- the questions about XSacle IXP devices. If you say Y, you will be
+ the questions about XScale IXP devices. If you say Y, you will be
asked for your specific card in the following questions.
if NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
index abc3b03..794a519 100644
--- a/drivers/net/ethernet/xscale/Makefile
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the Intel XScale IXP device drivers.
#
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index aee55c0..6fc04ff 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Intel IXP4xx Ethernet driver for Linux
*
* Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
* Ethernet port config (0x00 is not present on IXP42X):
*
* logical port 0x00 0x10 0x20
@@ -16,7 +13,6 @@
* RX-free queue 26 27 28
* TX-done queue is always 31, per-port RX and TX-ready queues are configurable
*
- *
* Queue entries:
* bits 0 -> 1 - NPE ID (RX and TX-done)
* bits 0 -> 2 - priority (TX, per 802.1D)
@@ -31,14 +27,15 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/net_tstamp.h>
+#include <linux/of.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <mach/ixp46x_ts.h>
-#include <mach/npe.h>
-#include <mach/qmgr.h>
+#include <linux/soc/ixp4xx/npe.h>
+#include <linux/soc/ixp4xx/qmgr.h>
#define DEBUG_DESC 0
#define DEBUG_RX 0
@@ -139,7 +136,7 @@
#ifdef __ARMEB__
typedef struct sk_buff buffer_t;
#define free_buffer dev_kfree_skb
-#define free_buffer_irq dev_kfree_skb_irq
+#define free_buffer_irq dev_consume_skb_irq
#else
typedef void buffer_t;
#define free_buffer kfree
@@ -1497,6 +1494,15 @@
static int __init eth_init_module(void)
{
int err;
+
+ /*
+ * FIXME: we bail out on device tree boot but this really needs
+ * to be fixed in a nicer way: this registers the MDIO bus before
+ * even matching the driver infrastructure, we should only probe
+ * detected hardware.
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
if ((err = ixp4xx_mdio_register()))
return err;
return platform_driver_register(&ixp4xx_eth_driver);