Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
new file mode 100644
index 0000000..24a5e99
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -0,0 +1,1306 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ8795 switch driver
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ * Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_common.h"
+#include "ksz8795_reg.h"
+
+static const struct {
+ char string[ETH_GSTRING_LEN];
+} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+ { "rx_hi" },
+ { "rx_undersize" },
+ { "rx_fragments" },
+ { "rx_oversize" },
+ { "rx_jabbers" },
+ { "rx_symbol_err" },
+ { "rx_crc_err" },
+ { "rx_align_err" },
+ { "rx_mac_ctrl" },
+ { "rx_pause" },
+ { "rx_bcast" },
+ { "rx_mcast" },
+ { "rx_ucast" },
+ { "rx_64_or_less" },
+ { "rx_65_127" },
+ { "rx_128_255" },
+ { "rx_256_511" },
+ { "rx_512_1023" },
+ { "rx_1024_1522" },
+ { "rx_1523_2000" },
+ { "rx_2001" },
+ { "tx_hi" },
+ { "tx_late_col" },
+ { "tx_pause" },
+ { "tx_bcast" },
+ { "tx_mcast" },
+ { "tx_ucast" },
+ { "tx_deferred" },
+ { "tx_total_col" },
+ { "tx_exc_col" },
+ { "tx_single_col" },
+ { "tx_mult_col" },
+ { "rx_total" },
+ { "tx_total" },
+ { "rx_discards" },
+ { "tx_discards" },
+};
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+ regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+ bool set)
+{
+ regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+ bits, set ? bits : 0);
+}
+
+static int ksz8795_reset_switch(struct ksz_device *dev)
+{
+ /* reset switch */
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+ SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+ ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+
+ return 0;
+}
+
+static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+{
+ u8 hi, lo;
+
+ /* Number of queues can only be 1, 2, or 4. */
+ switch (queue) {
+ case 4:
+ case 3:
+ queue = PORT_QUEUE_SPLIT_4;
+ break;
+ case 2:
+ queue = PORT_QUEUE_SPLIT_2;
+ break;
+ default:
+ queue = PORT_QUEUE_SPLIT_1;
+ }
+ ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
+ ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
+ lo &= ~PORT_QUEUE_SPLIT_L;
+ if (queue & PORT_QUEUE_SPLIT_2)
+ lo |= PORT_QUEUE_SPLIT_L;
+ hi &= ~PORT_QUEUE_SPLIT_H;
+ if (queue & PORT_QUEUE_SPLIT_4)
+ hi |= PORT_QUEUE_SPLIT_H;
+ ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
+ ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
+
+ /* Default is port based for egress rate limit. */
+ if (queue != PORT_QUEUE_SPLIT_1)
+ ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
+ true);
+}
+
+static void ksz8795_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
+ u64 *cnt)
+{
+ u16 ctrl_addr;
+ u32 data;
+ u8 check;
+ int loop;
+
+ ctrl_addr = addr + SWITCH_COUNTER_NUM * port;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ /* It is almost guaranteed to always read the valid bit because of
+ * slow SPI speed.
+ */
+ for (loop = 2; loop > 0; loop--) {
+ ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+
+ if (check & MIB_COUNTER_VALID) {
+ ksz_read32(dev, REG_IND_DATA_LO, &data);
+ if (check & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_COUNTER_VALUE + 1;
+ *cnt += data & MIB_COUNTER_VALUE;
+ break;
+ }
+ }
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
+{
+ u16 ctrl_addr;
+ u32 data;
+ u8 check;
+ int loop;
+
+ addr -= SWITCH_COUNTER_NUM;
+ ctrl_addr = (KS_MIB_TOTAL_RX_1 - KS_MIB_TOTAL_RX_0) * port;
+ ctrl_addr += addr + KS_MIB_TOTAL_RX_0;
+ ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ /* It is almost guaranteed to always read the valid bit because of
+ * slow SPI speed.
+ */
+ for (loop = 2; loop > 0; loop--) {
+ ksz_read8(dev, REG_IND_MIB_CHECK, &check);
+
+ if (check & MIB_COUNTER_VALID) {
+ ksz_read32(dev, REG_IND_DATA_LO, &data);
+ if (addr < 2) {
+ u64 total;
+
+ total = check & MIB_TOTAL_BYTES_H;
+ total <<= 32;
+ *cnt += total;
+ *cnt += data;
+ if (check & MIB_COUNTER_OVERFLOW) {
+ total = MIB_TOTAL_BYTES_H + 1;
+ total <<= 32;
+ *cnt += total;
+ }
+ } else {
+ if (check & MIB_COUNTER_OVERFLOW)
+ *cnt += MIB_PACKET_DROPPED + 1;
+ *cnt += data & MIB_PACKET_DROPPED;
+ }
+ break;
+ }
+ }
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+ /* enable the port for flush/freeze function */
+ if (freeze)
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze);
+
+ /* disable the port after freeze is done */
+ if (!freeze)
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+}
+
+static void ksz8795_port_init_cnt(struct ksz_device *dev, int port)
+{
+ struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+ /* flush all enabled port MIB counters */
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+ ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+
+ mib->cnt_ptr = 0;
+
+ /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->reg_mib_cnt) {
+ dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+ &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+
+ /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->mib_cnt) {
+ dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+ NULL, &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+ mib->cnt_ptr = 0;
+ memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
+}
+
+static void ksz8795_r_table(struct ksz_device *dev, int table, u16 addr,
+ u64 *data)
+{
+ u16 ctrl_addr;
+
+ ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+ ksz_read64(dev, REG_IND_DATA_HI, data);
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_w_table(struct ksz_device *dev, int table, u16 addr,
+ u64 data)
+{
+ u16 ctrl_addr;
+
+ ctrl_addr = IND_ACC_TABLE(table) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write64(dev, REG_IND_DATA_HI, data);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+ mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz8795_valid_dyn_entry(struct ksz_device *dev, u8 *data)
+{
+ int timeout = 100;
+
+ do {
+ ksz_read8(dev, REG_IND_DATA_CHECK, data);
+ timeout--;
+ } while ((*data & DYNAMIC_MAC_TABLE_NOT_READY) && timeout);
+
+ /* Entry is not ready for accessing. */
+ if (*data & DYNAMIC_MAC_TABLE_NOT_READY) {
+ return -EAGAIN;
+ /* Entry is ready for accessing. */
+ } else {
+ ksz_read8(dev, REG_IND_DATA_8, data);
+
+ /* There is no valid entry in the table. */
+ if (*data & DYNAMIC_MAC_TABLE_MAC_EMPTY)
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int ksz8795_r_dyn_mac_table(struct ksz_device *dev, u16 addr,
+ u8 *mac_addr, u8 *fid, u8 *src_port,
+ u8 *timestamp, u16 *entries)
+{
+ u32 data_hi, data_lo;
+ u16 ctrl_addr;
+ u8 data;
+ int rc;
+
+ ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
+
+ mutex_lock(&dev->alu_mutex);
+ ksz_write16(dev, REG_IND_CTRL_0, ctrl_addr);
+
+ rc = ksz8795_valid_dyn_entry(dev, &data);
+ if (rc == -EAGAIN) {
+ if (addr == 0)
+ *entries = 0;
+ } else if (rc == -ENXIO) {
+ *entries = 0;
+ /* At least one valid entry in the table. */
+ } else {
+ u64 buf = 0;
+ int cnt;
+
+ ksz_read64(dev, REG_IND_DATA_HI, &buf);
+ data_hi = (u32)(buf >> 32);
+ data_lo = (u32)buf;
+
+ /* Check out how many valid entry in the table. */
+ cnt = data & DYNAMIC_MAC_TABLE_ENTRIES_H;
+ cnt <<= DYNAMIC_MAC_ENTRIES_H_S;
+ cnt |= (data_hi & DYNAMIC_MAC_TABLE_ENTRIES) >>
+ DYNAMIC_MAC_ENTRIES_S;
+ *entries = cnt + 1;
+
+ *fid = (data_hi & DYNAMIC_MAC_TABLE_FID) >>
+ DYNAMIC_MAC_FID_S;
+ *src_port = (data_hi & DYNAMIC_MAC_TABLE_SRC_PORT) >>
+ DYNAMIC_MAC_SRC_PORT_S;
+ *timestamp = (data_hi & DYNAMIC_MAC_TABLE_TIMESTAMP) >>
+ DYNAMIC_MAC_TIMESTAMP_S;
+
+ mac_addr[5] = (u8)data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+
+ mac_addr[1] = (u8)data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+ rc = 0;
+ }
+ mutex_unlock(&dev->alu_mutex);
+
+ return rc;
+}
+
+static int ksz8795_r_sta_mac_table(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu)
+{
+ u32 data_hi, data_lo;
+ u64 data;
+
+ ksz8795_r_table(dev, TABLE_STATIC_MAC, addr, &data);
+ data_hi = data >> 32;
+ data_lo = (u32)data;
+ if (data_hi & (STATIC_MAC_TABLE_VALID | STATIC_MAC_TABLE_OVERRIDE)) {
+ alu->mac[5] = (u8)data_lo;
+ alu->mac[4] = (u8)(data_lo >> 8);
+ alu->mac[3] = (u8)(data_lo >> 16);
+ alu->mac[2] = (u8)(data_lo >> 24);
+ alu->mac[1] = (u8)data_hi;
+ alu->mac[0] = (u8)(data_hi >> 8);
+ alu->port_forward = (data_hi & STATIC_MAC_TABLE_FWD_PORTS) >>
+ STATIC_MAC_FWD_PORTS_S;
+ alu->is_override =
+ (data_hi & STATIC_MAC_TABLE_OVERRIDE) ? 1 : 0;
+ data_hi >>= 1;
+ alu->is_use_fid = (data_hi & STATIC_MAC_TABLE_USE_FID) ? 1 : 0;
+ alu->fid = (data_hi & STATIC_MAC_TABLE_FID) >>
+ STATIC_MAC_FID_S;
+ return 0;
+ }
+ return -ENXIO;
+}
+
+static void ksz8795_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+ struct alu_struct *alu)
+{
+ u32 data_hi, data_lo;
+ u64 data;
+
+ data_lo = ((u32)alu->mac[2] << 24) |
+ ((u32)alu->mac[3] << 16) |
+ ((u32)alu->mac[4] << 8) | alu->mac[5];
+ data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
+ data_hi |= (u32)alu->port_forward << STATIC_MAC_FWD_PORTS_S;
+
+ if (alu->is_override)
+ data_hi |= STATIC_MAC_TABLE_OVERRIDE;
+ if (alu->is_use_fid) {
+ data_hi |= STATIC_MAC_TABLE_USE_FID;
+ data_hi |= (u32)alu->fid << STATIC_MAC_FID_S;
+ }
+ if (alu->is_static)
+ data_hi |= STATIC_MAC_TABLE_VALID;
+ else
+ data_hi &= ~STATIC_MAC_TABLE_OVERRIDE;
+
+ data = (u64)data_hi << 32 | data_lo;
+ ksz8795_w_table(dev, TABLE_STATIC_MAC, addr, data);
+}
+
+static void ksz8795_from_vlan(u16 vlan, u8 *fid, u8 *member, u8 *valid)
+{
+ *fid = vlan & VLAN_TABLE_FID;
+ *member = (vlan & VLAN_TABLE_MEMBERSHIP) >> VLAN_TABLE_MEMBERSHIP_S;
+ *valid = !!(vlan & VLAN_TABLE_VALID);
+}
+
+static void ksz8795_to_vlan(u8 fid, u8 member, u8 valid, u16 *vlan)
+{
+ *vlan = fid;
+ *vlan |= (u16)member << VLAN_TABLE_MEMBERSHIP_S;
+ if (valid)
+ *vlan |= VLAN_TABLE_VALID;
+}
+
+static void ksz8795_r_vlan_entries(struct ksz_device *dev, u16 addr)
+{
+ u64 data;
+ int i;
+
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &data);
+ addr *= 4;
+ for (i = 0; i < 4; i++) {
+ dev->vlan_cache[addr + i].table[0] = (u16)data;
+ data >>= VLAN_TABLE_S;
+ }
+}
+
+static void ksz8795_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
+{
+ int index;
+ u16 *data;
+ u16 addr;
+ u64 buf;
+
+ data = (u16 *)&buf;
+ addr = vid / 4;
+ index = vid & 3;
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+ *vlan = data[index];
+}
+
+static void ksz8795_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
+{
+ int index;
+ u16 *data;
+ u16 addr;
+ u64 buf;
+
+ data = (u16 *)&buf;
+ addr = vid / 4;
+ index = vid & 3;
+ ksz8795_r_table(dev, TABLE_VLAN, addr, &buf);
+ data[index] = vlan;
+ dev->vlan_cache[vid].table[0] = vlan;
+ ksz8795_w_table(dev, TABLE_VLAN, addr, buf);
+}
+
+static void ksz8795_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
+{
+ u8 restart, speed, ctrl, link;
+ int processed = true;
+ u16 data = 0;
+ u8 p = phy;
+
+ switch (reg) {
+ case PHY_REG_CTRL:
+ ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+ ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+ ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+ if (restart & PORT_PHY_LOOPBACK)
+ data |= PHY_LOOPBACK;
+ if (ctrl & PORT_FORCE_100_MBIT)
+ data |= PHY_SPEED_100MBIT;
+ if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+ data |= PHY_AUTO_NEG_ENABLE;
+ if (restart & PORT_POWER_DOWN)
+ data |= PHY_POWER_DOWN;
+ if (restart & PORT_AUTO_NEG_RESTART)
+ data |= PHY_AUTO_NEG_RESTART;
+ if (ctrl & PORT_FORCE_FULL_DUPLEX)
+ data |= PHY_FULL_DUPLEX;
+ if (speed & PORT_HP_MDIX)
+ data |= PHY_HP_MDIX;
+ if (restart & PORT_FORCE_MDIX)
+ data |= PHY_FORCE_MDIX;
+ if (restart & PORT_AUTO_MDIX_DISABLE)
+ data |= PHY_AUTO_MDIX_DISABLE;
+ if (restart & PORT_TX_DISABLE)
+ data |= PHY_TRANSMIT_DISABLE;
+ if (restart & PORT_LED_OFF)
+ data |= PHY_LED_DISABLE;
+ break;
+ case PHY_REG_STATUS:
+ ksz_pread8(dev, p, P_LINK_STATUS, &link);
+ data = PHY_100BTX_FD_CAPABLE |
+ PHY_100BTX_CAPABLE |
+ PHY_10BT_FD_CAPABLE |
+ PHY_10BT_CAPABLE |
+ PHY_AUTO_NEG_CAPABLE;
+ if (link & PORT_AUTO_NEG_COMPLETE)
+ data |= PHY_AUTO_NEG_ACKNOWLEDGE;
+ if (link & PORT_STAT_LINK_GOOD)
+ data |= PHY_LINK_STATUS;
+ break;
+ case PHY_REG_ID_1:
+ data = KSZ8795_ID_HI;
+ break;
+ case PHY_REG_ID_2:
+ data = KSZ8795_ID_LO;
+ break;
+ case PHY_REG_AUTO_NEGOTIATION:
+ ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+ data = PHY_AUTO_NEG_802_3;
+ if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ if (ctrl & PORT_AUTO_NEG_100BTX_FD)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ if (ctrl & PORT_AUTO_NEG_100BTX)
+ data |= PHY_AUTO_NEG_100BTX;
+ if (ctrl & PORT_AUTO_NEG_10BT_FD)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ if (ctrl & PORT_AUTO_NEG_10BT)
+ data |= PHY_AUTO_NEG_10BT;
+ break;
+ case PHY_REG_REMOTE_CAPABILITY:
+ ksz_pread8(dev, p, P_REMOTE_STATUS, &link);
+ data = PHY_AUTO_NEG_802_3;
+ if (link & PORT_REMOTE_SYM_PAUSE)
+ data |= PHY_AUTO_NEG_SYM_PAUSE;
+ if (link & PORT_REMOTE_100BTX_FD)
+ data |= PHY_AUTO_NEG_100BTX_FD;
+ if (link & PORT_REMOTE_100BTX)
+ data |= PHY_AUTO_NEG_100BTX;
+ if (link & PORT_REMOTE_10BT_FD)
+ data |= PHY_AUTO_NEG_10BT_FD;
+ if (link & PORT_REMOTE_10BT)
+ data |= PHY_AUTO_NEG_10BT;
+ if (data & ~PHY_AUTO_NEG_802_3)
+ data |= PHY_REMOTE_ACKNOWLEDGE_NOT;
+ break;
+ default:
+ processed = false;
+ break;
+ }
+ if (processed)
+ *val = data;
+}
+
+static void ksz8795_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+{
+ u8 p = phy;
+ u8 restart, speed, ctrl, data;
+
+ switch (reg) {
+ case PHY_REG_CTRL:
+
+ /* Do not support PHY reset function. */
+ if (val & PHY_RESET)
+ break;
+ ksz_pread8(dev, p, P_SPEED_STATUS, &speed);
+ data = speed;
+ if (val & PHY_HP_MDIX)
+ data |= PORT_HP_MDIX;
+ else
+ data &= ~PORT_HP_MDIX;
+ if (data != speed)
+ ksz_pwrite8(dev, p, P_SPEED_STATUS, data);
+ ksz_pread8(dev, p, P_FORCE_CTRL, &ctrl);
+ data = ctrl;
+ if (!(val & PHY_AUTO_NEG_ENABLE))
+ data |= PORT_AUTO_NEG_DISABLE;
+ else
+ data &= ~PORT_AUTO_NEG_DISABLE;
+
+ /* Fiber port does not support auto-negotiation. */
+ if (dev->ports[p].fiber)
+ data |= PORT_AUTO_NEG_DISABLE;
+ if (val & PHY_SPEED_100MBIT)
+ data |= PORT_FORCE_100_MBIT;
+ else
+ data &= ~PORT_FORCE_100_MBIT;
+ if (val & PHY_FULL_DUPLEX)
+ data |= PORT_FORCE_FULL_DUPLEX;
+ else
+ data &= ~PORT_FORCE_FULL_DUPLEX;
+ if (data != ctrl)
+ ksz_pwrite8(dev, p, P_FORCE_CTRL, data);
+ ksz_pread8(dev, p, P_NEG_RESTART_CTRL, &restart);
+ data = restart;
+ if (val & PHY_LED_DISABLE)
+ data |= PORT_LED_OFF;
+ else
+ data &= ~PORT_LED_OFF;
+ if (val & PHY_TRANSMIT_DISABLE)
+ data |= PORT_TX_DISABLE;
+ else
+ data &= ~PORT_TX_DISABLE;
+ if (val & PHY_AUTO_NEG_RESTART)
+ data |= PORT_AUTO_NEG_RESTART;
+ else
+ data &= ~(PORT_AUTO_NEG_RESTART);
+ if (val & PHY_POWER_DOWN)
+ data |= PORT_POWER_DOWN;
+ else
+ data &= ~PORT_POWER_DOWN;
+ if (val & PHY_AUTO_MDIX_DISABLE)
+ data |= PORT_AUTO_MDIX_DISABLE;
+ else
+ data &= ~PORT_AUTO_MDIX_DISABLE;
+ if (val & PHY_FORCE_MDIX)
+ data |= PORT_FORCE_MDIX;
+ else
+ data &= ~PORT_FORCE_MDIX;
+ if (val & PHY_LOOPBACK)
+ data |= PORT_PHY_LOOPBACK;
+ else
+ data &= ~PORT_PHY_LOOPBACK;
+ if (data != restart)
+ ksz_pwrite8(dev, p, P_NEG_RESTART_CTRL, data);
+ break;
+ case PHY_REG_AUTO_NEGOTIATION:
+ ksz_pread8(dev, p, P_LOCAL_CTRL, &ctrl);
+ data = ctrl;
+ data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
+ PORT_AUTO_NEG_100BTX_FD |
+ PORT_AUTO_NEG_100BTX |
+ PORT_AUTO_NEG_10BT_FD |
+ PORT_AUTO_NEG_10BT);
+ if (val & PHY_AUTO_NEG_SYM_PAUSE)
+ data |= PORT_AUTO_NEG_SYM_PAUSE;
+ if (val & PHY_AUTO_NEG_100BTX_FD)
+ data |= PORT_AUTO_NEG_100BTX_FD;
+ if (val & PHY_AUTO_NEG_100BTX)
+ data |= PORT_AUTO_NEG_100BTX;
+ if (val & PHY_AUTO_NEG_10BT_FD)
+ data |= PORT_AUTO_NEG_10BT_FD;
+ if (val & PHY_AUTO_NEG_10BT)
+ data |= PORT_AUTO_NEG_10BT;
+ if (data != ctrl)
+ ksz_pwrite8(dev, p, P_LOCAL_CTRL, data);
+ break;
+ default:
+ break;
+ }
+}
+
+static enum dsa_tag_protocol ksz8795_get_tag_protocol(struct dsa_switch *ds,
+ int port)
+{
+ return DSA_TAG_PROTO_KSZ8795;
+}
+
+static void ksz8795_get_strings(struct dsa_switch *ds, int port,
+ u32 stringset, uint8_t *buf)
+{
+ int i;
+
+ for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+ memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static void ksz8795_cfg_port_member(struct ksz_device *dev, int port,
+ u8 member)
+{
+ u8 data;
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+ data &= ~PORT_VLAN_MEMBERSHIP;
+ data |= (member & dev->port_mask);
+ ksz_pwrite8(dev, port, P_MIRROR_CTRL, data);
+ dev->ports[port].member = member;
+}
+
+static void ksz8795_port_stp_state_set(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct ksz_device *dev = ds->priv;
+ int forward = dev->member;
+ struct ksz_port *p;
+ int member = -1;
+ u8 data;
+
+ p = &dev->ports[port];
+
+ ksz_pread8(dev, port, P_STP_CTRL, &data);
+ data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ data |= PORT_LEARN_DISABLE;
+ if (port < SWITCH_PORT_NUM)
+ member = 0;
+ break;
+ case BR_STATE_LISTENING:
+ data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+ if (port < SWITCH_PORT_NUM &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ case BR_STATE_LEARNING:
+ data |= PORT_RX_ENABLE;
+ break;
+ case BR_STATE_FORWARDING:
+ data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+
+ /* This function is also used internally. */
+ if (port == dev->cpu_port)
+ break;
+
+ /* Port is a member of a bridge. */
+ if (dev->br_member & BIT(port)) {
+ dev->member |= BIT(port);
+ member = dev->member;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ }
+ break;
+ case BR_STATE_BLOCKING:
+ data |= PORT_LEARN_DISABLE;
+ if (port < SWITCH_PORT_NUM &&
+ p->stp_state == BR_STATE_DISABLED)
+ member = dev->host_mask | p->vid_member;
+ break;
+ default:
+ dev_err(ds->dev, "invalid STP state: %d\n", state);
+ return;
+ }
+
+ ksz_pwrite8(dev, port, P_STP_CTRL, data);
+ p->stp_state = state;
+ if (data & PORT_RX_ENABLE)
+ dev->rx_ports |= BIT(port);
+ else
+ dev->rx_ports &= ~BIT(port);
+ if (data & PORT_TX_ENABLE)
+ dev->tx_ports |= BIT(port);
+ else
+ dev->tx_ports &= ~BIT(port);
+
+ /* Port membership may share register with STP state. */
+ if (member >= 0 && member != p->member)
+ ksz8795_cfg_port_member(dev, port, (u8)member);
+
+ /* Check if forwarding needs to be updated. */
+ if (state != BR_STATE_FORWARDING) {
+ if (dev->br_member & BIT(port))
+ dev->member &= ~BIT(port);
+ }
+
+ /* When topology has changed the function ksz_update_port_member
+ * should be called to modify port forwarding behavior.
+ */
+ if (forward != dev->member)
+ ksz_update_port_member(dev, port);
+}
+
+static void ksz8795_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+ u8 learn[TOTAL_PORT_NUM];
+ int first, index, cnt;
+ struct ksz_port *p;
+
+ if ((uint)port < TOTAL_PORT_NUM) {
+ first = port;
+ cnt = port + 1;
+ } else {
+ /* Flush all ports. */
+ first = 0;
+ cnt = dev->mib_port_cnt;
+ }
+ for (index = first; index < cnt; index++) {
+ p = &dev->ports[index];
+ if (!p->on)
+ continue;
+ ksz_pread8(dev, index, P_STP_CTRL, &learn[index]);
+ if (!(learn[index] & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, index, P_STP_CTRL,
+ learn[index] | PORT_LEARN_DISABLE);
+ }
+ ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+ for (index = first; index < cnt; index++) {
+ p = &dev->ports[index];
+ if (!p->on)
+ continue;
+ if (!(learn[index] & PORT_LEARN_DISABLE))
+ ksz_pwrite8(dev, index, P_STP_CTRL, learn[index]);
+ }
+}
+
+static int ksz8795_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool flag)
+{
+ struct ksz_device *dev = ds->priv;
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+
+ return 0;
+}
+
+static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ struct ksz_device *dev = ds->priv;
+ u16 data, vid, new_pvid = 0;
+ u8 fid, member, valid;
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ ksz8795_r_vlan_table(dev, vid, &data);
+ ksz8795_from_vlan(data, &fid, &member, &valid);
+
+ /* First time to setup the VLAN entry. */
+ if (!valid) {
+ /* Need to find a way to map VID to FID. */
+ fid = 1;
+ valid = 1;
+ }
+ member |= BIT(port);
+
+ ksz8795_to_vlan(fid, member, valid, &data);
+ ksz8795_w_vlan_table(dev, vid, data);
+
+ /* change PVID */
+ if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+ new_pvid = vid;
+ }
+
+ if (new_pvid) {
+ ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
+ vid &= 0xfff;
+ vid |= new_pvid;
+ ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+ }
+}
+
+static int ksz8795_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ struct ksz_device *dev = ds->priv;
+ u16 data, vid, pvid, new_pvid = 0;
+ u8 fid, member, valid;
+
+ ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
+ pvid = pvid & 0xFFF;
+
+ ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+ ksz8795_r_vlan_table(dev, vid, &data);
+ ksz8795_from_vlan(data, &fid, &member, &valid);
+
+ member &= ~BIT(port);
+
+ /* Invalidate the entry if no more member. */
+ if (!member) {
+ fid = 0;
+ valid = 0;
+ }
+
+ if (pvid == vid)
+ new_pvid = 1;
+
+ ksz8795_to_vlan(fid, member, valid, &data);
+ ksz8795_w_vlan_table(dev, vid, data);
+ }
+
+ if (new_pvid != pvid)
+ ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, pvid);
+
+ return 0;
+}
+
+static int ksz8795_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (ingress) {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+ dev->mirror_rx |= BIT(port);
+ } else {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+ dev->mirror_tx |= BIT(port);
+ }
+
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+ /* configure mirror port */
+ if (dev->mirror_rx || dev->mirror_tx)
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, true);
+
+ return 0;
+}
+
+static void ksz8795_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct ksz_device *dev = ds->priv;
+ u8 data;
+
+ if (mirror->ingress) {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+ dev->mirror_rx &= ~BIT(port);
+ } else {
+ ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+ dev->mirror_tx &= ~BIT(port);
+ }
+
+ ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+ if (!dev->mirror_rx && !dev->mirror_tx)
+ ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+ PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+ struct ksz_port *p = &dev->ports[port];
+ u8 data8, member;
+
+ /* enable broadcast storm limit */
+ ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+ ksz8795_set_prio_queue(dev, port, 4);
+
+ /* disable DiffServ priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+
+ /* replace priority */
+ ksz_port_cfg(dev, port, P_802_1P_CTRL, PORT_802_1P_REMAPPING, false);
+
+ /* enable 802.1p priority */
+ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
+
+ if (cpu_port) {
+ /* Configure MII interface for proper network communication. */
+ ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
+ data8 &= ~PORT_INTERFACE_TYPE;
+ data8 &= ~PORT_GMII_1GPS_MODE;
+ switch (dev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ p->phydev.speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ data8 |= PORT_INTERFACE_RMII;
+ p->phydev.speed = SPEED_100;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_GMII;
+ p->phydev.speed = SPEED_1000;
+ break;
+ default:
+ data8 &= ~PORT_RGMII_ID_IN_ENABLE;
+ data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ data8 |= PORT_RGMII_ID_IN_ENABLE;
+ if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ data8 |= PORT_RGMII_ID_OUT_ENABLE;
+ data8 |= PORT_GMII_1GPS_MODE;
+ data8 |= PORT_INTERFACE_RGMII;
+ p->phydev.speed = SPEED_1000;
+ break;
+ }
+ ksz_write8(dev, REG_PORT_5_CTRL_6, data8);
+ p->phydev.duplex = 1;
+
+ member = dev->port_mask;
+ dev->on_ports = dev->host_mask;
+ dev->live_ports = dev->host_mask;
+ } else {
+ member = dev->host_mask | p->vid_member;
+ dev->on_ports |= BIT(port);
+
+ /* Link was detected before port is enabled. */
+ if (p->phydev.link)
+ dev->live_ports |= BIT(port);
+ }
+ ksz8795_cfg_port_member(dev, port, member);
+}
+
+static void ksz8795_config_cpu_port(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port *p;
+ u8 remote;
+ int i;
+
+ ds->num_ports = dev->port_cnt + 1;
+
+ /* Switch marks the maximum frame with extra byte as oversize. */
+ ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
+ ksz_cfg(dev, S_TAIL_TAG_CTRL, SW_TAIL_TAG_ENABLE, true);
+
+ p = &dev->ports[dev->cpu_port];
+ p->vid_member = dev->port_mask;
+ p->on = 1;
+
+ ksz8795_port_setup(dev, dev->cpu_port, true);
+ dev->member = dev->host_mask;
+
+ for (i = 0; i < SWITCH_PORT_NUM; i++) {
+ p = &dev->ports[i];
+
+ /* Initialize to non-zero so that ksz_cfg_port_member() will
+ * be called.
+ */
+ p->vid_member = BIT(i);
+ p->member = dev->port_mask;
+ ksz8795_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+
+ /* Last port may be disabled. */
+ if (i == dev->port_cnt)
+ break;
+ p->on = 1;
+ p->phy = 1;
+ }
+ for (i = 0; i < dev->phy_port_cnt; i++) {
+ p = &dev->ports[i];
+ if (!p->on)
+ continue;
+ ksz_pread8(dev, i, P_REMOTE_STATUS, &remote);
+ if (remote & PORT_FIBER_MODE)
+ p->fiber = 1;
+ if (p->fiber)
+ ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
+ true);
+ else
+ ksz_port_cfg(dev, i, P_STP_CTRL, PORT_FORCE_FLOW_CTRL,
+ false);
+ }
+}
+
+static int ksz8795_setup(struct dsa_switch *ds)
+{
+ struct ksz_device *dev = ds->priv;
+ struct alu_struct alu;
+ int i, ret = 0;
+
+ dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+ dev->num_vlans, GFP_KERNEL);
+ if (!dev->vlan_cache)
+ return -ENOMEM;
+
+ ret = ksz8795_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+ return ret;
+ }
+
+ ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
+
+ /* Enable automatic fast aging when link changed detected. */
+ ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
+
+ /* Enable aggressive back off algorithm in half duplex mode. */
+ regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1,
+ SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
+
+ /*
+ * Make sure unicast VLAN boundary is set as default and
+ * enable no excessive collision drop.
+ */
+ regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2,
+ UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
+ UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
+
+ ksz8795_config_cpu_port(ds);
+
+ ksz_cfg(dev, REG_SW_CTRL_2, MULTICAST_STORM_DISABLE, true);
+
+ ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
+
+ ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+ /* set broadcast storm protection 10% rate */
+ regmap_update_bits(dev->regmap[1], S_REPLACE_VID_CTRL,
+ BROADCAST_STORM_RATE,
+ (BROADCAST_STORM_VALUE *
+ BROADCAST_STORM_PROT_RATE) / 100);
+
+ for (i = 0; i < VLAN_TABLE_ENTRIES; i++)
+ ksz8795_r_vlan_entries(dev, i);
+
+ /* Setup STP address for STP operation. */
+ memset(&alu, 0, sizeof(alu));
+ ether_addr_copy(alu.mac, eth_stp_addr);
+ alu.is_static = true;
+ alu.is_override = true;
+ alu.port_forward = dev->host_mask;
+
+ ksz8795_w_sta_mac_table(dev, 0, &alu);
+
+ ksz_init_mib_timer(dev);
+
+ return 0;
+}
+
+static const struct dsa_switch_ops ksz8795_switch_ops = {
+ .get_tag_protocol = ksz8795_get_tag_protocol,
+ .setup = ksz8795_setup,
+ .phy_read = ksz_phy_read16,
+ .phy_write = ksz_phy_write16,
+ .adjust_link = ksz_adjust_link,
+ .port_enable = ksz_enable_port,
+ .port_disable = ksz_disable_port,
+ .get_strings = ksz8795_get_strings,
+ .get_ethtool_stats = ksz_get_ethtool_stats,
+ .get_sset_count = ksz_sset_count,
+ .port_bridge_join = ksz_port_bridge_join,
+ .port_bridge_leave = ksz_port_bridge_leave,
+ .port_stp_state_set = ksz8795_port_stp_state_set,
+ .port_fast_age = ksz_port_fast_age,
+ .port_vlan_filtering = ksz8795_port_vlan_filtering,
+ .port_vlan_prepare = ksz_port_vlan_prepare,
+ .port_vlan_add = ksz8795_port_vlan_add,
+ .port_vlan_del = ksz8795_port_vlan_del,
+ .port_fdb_dump = ksz_port_fdb_dump,
+ .port_mdb_prepare = ksz_port_mdb_prepare,
+ .port_mdb_add = ksz_port_mdb_add,
+ .port_mdb_del = ksz_port_mdb_del,
+ .port_mirror_add = ksz8795_port_mirror_add,
+ .port_mirror_del = ksz8795_port_mirror_del,
+};
+
+static u32 ksz8795_get_port_addr(int port, int offset)
+{
+ return PORT_CTRL_ADDR(port, offset);
+}
+
+static int ksz8795_switch_detect(struct ksz_device *dev)
+{
+ u8 id1, id2;
+ u16 id16;
+ int ret;
+
+ /* read chip id */
+ ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
+ if (ret)
+ return ret;
+
+ id1 = id16 >> 8;
+ id2 = id16 & SW_CHIP_ID_M;
+ if (id1 != FAMILY_ID ||
+ (id2 != CHIP_ID_94 && id2 != CHIP_ID_95))
+ return -ENODEV;
+
+ dev->mib_port_cnt = TOTAL_PORT_NUM;
+ dev->phy_port_cnt = SWITCH_PORT_NUM;
+ dev->port_cnt = SWITCH_PORT_NUM;
+
+ if (id2 == CHIP_ID_95) {
+ u8 val;
+
+ id2 = 0x95;
+ ksz_read8(dev, REG_PORT_1_STATUS_0, &val);
+ if (val & PORT_FIBER_MODE)
+ id2 = 0x65;
+ } else if (id2 == CHIP_ID_94) {
+ dev->port_cnt--;
+ dev->last_port = dev->port_cnt;
+ id2 = 0x94;
+ }
+ id16 &= ~0xff;
+ id16 |= id2;
+ dev->chip_id = id16;
+
+ dev->cpu_port = dev->mib_port_cnt - 1;
+ dev->host_mask = BIT(dev->cpu_port);
+
+ return 0;
+}
+
+struct ksz_chip_data {
+ u16 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+};
+
+static const struct ksz_chip_data ksz8795_switch_chips[] = {
+ {
+ .chip_id = 0x8795,
+ .dev_name = "KSZ8795",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 4, /* total physical port count */
+ },
+ {
+ .chip_id = 0x8794,
+ .dev_name = "KSZ8794",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 3, /* total physical port count */
+ },
+ {
+ .chip_id = 0x8765,
+ .dev_name = "KSZ8765",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 4, /* total physical port count */
+ },
+};
+
+static int ksz8795_switch_init(struct ksz_device *dev)
+{
+ int i;
+
+ dev->ds->ops = &ksz8795_switch_ops;
+
+ for (i = 0; i < ARRAY_SIZE(ksz8795_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz8795_switch_chips[i];
+
+ if (dev->chip_id == chip->chip_id) {
+ dev->name = chip->dev_name;
+ dev->num_vlans = chip->num_vlans;
+ dev->num_alus = chip->num_alus;
+ dev->num_statics = chip->num_statics;
+ dev->port_cnt = chip->port_cnt;
+ dev->cpu_ports = chip->cpu_ports;
+
+ break;
+ }
+ }
+
+ /* no switch found */
+ if (!dev->cpu_ports)
+ return -ENODEV;
+
+ dev->port_mask = BIT(dev->port_cnt) - 1;
+ dev->port_mask |= dev->host_mask;
+
+ dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
+ dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+ i = dev->mib_port_cnt;
+ dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+ GFP_KERNEL);
+ if (!dev->ports)
+ return -ENOMEM;
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ mutex_init(&dev->ports[i].mib.cnt_mutex);
+ dev->ports[i].mib.counters =
+ devm_kzalloc(dev->dev,
+ sizeof(u64) *
+ (TOTAL_SWITCH_COUNTER_NUM + 1),
+ GFP_KERNEL);
+ if (!dev->ports[i].mib.counters)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void ksz8795_switch_exit(struct ksz_device *dev)
+{
+ ksz8795_reset_switch(dev);
+}
+
+static const struct ksz_dev_ops ksz8795_dev_ops = {
+ .get_port_addr = ksz8795_get_port_addr,
+ .cfg_port_member = ksz8795_cfg_port_member,
+ .flush_dyn_mac_table = ksz8795_flush_dyn_mac_table,
+ .port_setup = ksz8795_port_setup,
+ .r_phy = ksz8795_r_phy,
+ .w_phy = ksz8795_w_phy,
+ .r_dyn_mac_table = ksz8795_r_dyn_mac_table,
+ .r_sta_mac_table = ksz8795_r_sta_mac_table,
+ .w_sta_mac_table = ksz8795_w_sta_mac_table,
+ .r_mib_cnt = ksz8795_r_mib_cnt,
+ .r_mib_pkt = ksz8795_r_mib_pkt,
+ .freeze_mib = ksz8795_freeze_mib,
+ .port_init_cnt = ksz8795_port_init_cnt,
+ .shutdown = ksz8795_reset_switch,
+ .detect = ksz8795_switch_detect,
+ .init = ksz8795_switch_init,
+ .exit = ksz8795_switch_exit,
+};
+
+int ksz8795_switch_register(struct ksz_device *dev)
+{
+ return ksz_switch_register(dev, &ksz8795_dev_ops);
+}
+EXPORT_SYMBOL(ksz8795_switch_register);
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");