Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 383e7b7..ccbb897 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
menu "IRQ chip support"
config IRQCHIP
@@ -6,7 +7,6 @@
config ARM_GIC
bool
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
@@ -15,10 +15,10 @@
bool
depends on PM
select ARM_GIC
- select PM_CLK
config ARM_GIC_MAX_NR
int
+ depends on ARM_GIC
default 2 if ARCH_REALVIEW
default 1
@@ -33,7 +33,6 @@
config ARM_GIC_V3
bool
- select IRQ_DOMAIN
select GENERIC_IRQ_MULTI_HANDLER
select IRQ_DOMAIN_HIERARCHY
select PARTITION_PERCPU
@@ -59,7 +58,6 @@
config ARM_NVIC
bool
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_CHIP
@@ -89,6 +87,14 @@
select PCI_MSI
select GENERIC_IRQ_CHIP
+config AL_FIC
+ bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
+ depends on OF || COMPILE_TEST
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ help
+ Support Amazon's Annapurna Labs Fabric Interrupt Controller.
+
config ATMEL_AIC_IRQ
bool
select GENERIC_IRQ_CHIP
@@ -129,6 +135,16 @@
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+config DAVINCI_AINTC
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
+config DAVINCI_CP_INTC
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
config DW_APB_ICTL
bool
select GENERIC_IRQ_CHIP
@@ -150,6 +166,15 @@
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+config IXP4XX_IRQ
+ bool
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_MULTI_HANDLER
+ select SPARSE_IRQ
+
+config MADERA_IRQ
+ tristate
+
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
@@ -195,14 +220,31 @@
help
Support for the J-Core integrated AIC.
-config RENESAS_INTC_IRQPIN
+config RDA_INTC
bool
select IRQ_DOMAIN
+config RENESAS_INTC_IRQPIN
+ bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
+ select IRQ_DOMAIN
+ help
+ Enable support for the Renesas Interrupt Controller for external
+ interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
+
config RENESAS_IRQC
- bool
+ bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas Interrupt Controller for external
+ devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
+
+config RENESAS_RZA1_IRQC
+ bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
+ to 8 external interrupts with configurable sense select.
config ST_IRQCHIP
bool
@@ -273,13 +315,28 @@
depends on MACH_INGENIC
default y
+config INGENIC_TCU_IRQ
+ bool "Ingenic JZ47xx TCU interrupt controller"
+ default MACH_INGENIC
+ depends on MIPS || COMPILE_TEST
+ select MFD_SYSCON
+ select GENERIC_IRQ_CHIP
+ help
+ Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
+ JZ47xx SoCs.
+
+ If unsure, say N.
+
config RENESAS_H8300H_INTC
bool
select IRQ_DOMAIN
config RENESAS_H8S_INTC
- bool
+ bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas H8/300 Interrupt Controller, as found
+ on Renesas H8S SoCs.
config IMX_GPCV2
bool
@@ -310,6 +367,9 @@
config MVEBU_PIC
bool
+config MVEBU_SEI
+ bool
+
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
@@ -332,7 +392,6 @@
config QCOM_IRQ_COMBINER
bool "QCOM IRQ combiner support"
depends on ARCH_QCOM && ACPI
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Say yes here to add support for the IRQ combiner devices embedded
@@ -349,7 +408,6 @@
config MESON_IRQ_GPIO
bool "Meson GPIO Interrupt Multiplexer"
depends on ARCH_MESON
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Support Meson SoC Family GPIO Interrupt Multiplexer
@@ -365,12 +423,66 @@
config QCOM_PDC
bool "QCOM PDC"
depends on ARCH_QCOM
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Power Domain Controller driver to manage and configure wakeup
IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
+config CSKY_MPINTC
+ bool "C-SKY Multi Processor Interrupt Controller"
+ depends on CSKY
+ help
+ Say yes here to enable C-SKY SMP interrupt controller driver used
+ for C-SKY SMP system.
+ In fact it's not mmio map in hw and it use ld/st to visit the
+ controller's register inside CPU.
+
+config CSKY_APB_INTC
+ bool "C-SKY APB Interrupt Controller"
+ depends on CSKY
+ help
+ Say yes here to enable C-SKY APB interrupt controller driver used
+ by C-SKY single core SOC system. It use mmio map apb-bus to visit
+ the controller's register.
+
+config IMX_IRQSTEER
+ bool "i.MX IRQSTEER support"
+ depends on ARCH_MXC || COMPILE_TEST
+ default ARCH_MXC
+ select IRQ_DOMAIN
+ help
+ Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
+config TI_SCI_INTR_IRQCHIP
+ bool
+ depends on TI_SCI_PROTOCOL
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ This enables the irqchip driver support for K3 Interrupt router
+ over TI System Control Interface available on some new TI's SoCs.
+ If you wish to use interrupt router irq resources managed by the
+ TI System Controller, say Y here. Otherwise, say N.
+
+config TI_SCI_INTA_IRQCHIP
+ bool
+ depends on TI_SCI_PROTOCOL
+ select IRQ_DOMAIN_HIERARCHY
+ select TI_SCI_INTA_MSI_DOMAIN
+ help
+ This enables the irqchip driver support for K3 Interrupt aggregator
+ over TI System Control Interface available on some new TI's SoCs.
+ If you wish to use interrupt aggregator irq resources managed by the
+ TI System Controller, say Y here. Otherwise, say N.
+
endmenu
config SIFIVE_PLIC