Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
new file mode 100644
index 0000000..21fdcde
--- /dev/null
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include "qcom-vadc-common.h"
+
+#define ADC5_USR_REVISION1 0x0
+#define ADC5_USR_STATUS1 0x8
+#define ADC5_USR_STATUS1_REQ_STS BIT(1)
+#define ADC5_USR_STATUS1_EOC BIT(0)
+#define ADC5_USR_STATUS1_REQ_STS_EOC_MASK 0x3
+
+#define ADC5_USR_STATUS2 0x9
+#define ADC5_USR_STATUS2_CONV_SEQ_MASK 0x70
+#define ADC5_USR_STATUS2_CONV_SEQ_MASK_SHIFT 0x5
+
+#define ADC5_USR_IBAT_MEAS 0xf
+#define ADC5_USR_IBAT_MEAS_SUPPORTED BIT(0)
+
+#define ADC5_USR_DIG_PARAM 0x42
+#define ADC5_USR_DIG_PARAM_CAL_VAL BIT(6)
+#define ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT 6
+#define ADC5_USR_DIG_PARAM_CAL_SEL 0x30
+#define ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT 4
+#define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL 0xc
+#define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT 2
+
+#define ADC5_USR_FAST_AVG_CTL 0x43
+#define ADC5_USR_FAST_AVG_CTL_EN BIT(7)
+#define ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK 0x7
+
+#define ADC5_USR_CH_SEL_CTL 0x44
+
+#define ADC5_USR_DELAY_CTL 0x45
+#define ADC5_USR_HW_SETTLE_DELAY_MASK 0xf
+
+#define ADC5_USR_EN_CTL1 0x46
+#define ADC5_USR_EN_CTL1_ADC_EN BIT(7)
+
+#define ADC5_USR_CONV_REQ 0x47
+#define ADC5_USR_CONV_REQ_REQ BIT(7)
+
+#define ADC5_USR_DATA0 0x50
+
+#define ADC5_USR_DATA1 0x51
+
+#define ADC5_USR_IBAT_DATA0 0x52
+
+#define ADC5_USR_IBAT_DATA1 0x53
+
+/*
+ * Conversion time varies based on the decimation, clock rate, fast average
+ * samples and measurements queued across different VADC peripherals.
+ * Set the timeout to a max of 100ms.
+ */
+#define ADC5_CONV_TIME_MIN_US 263
+#define ADC5_CONV_TIME_MAX_US 264
+#define ADC5_CONV_TIME_RETRY 400
+#define ADC5_CONV_TIMEOUT msecs_to_jiffies(100)
+
+/* Digital version >= 5.3 supports hw_settle_2 */
+#define ADC5_HW_SETTLE_DIFF_MINOR 3
+#define ADC5_HW_SETTLE_DIFF_MAJOR 5
+
+enum adc5_cal_method {
+ ADC5_NO_CAL = 0,
+ ADC5_RATIOMETRIC_CAL,
+ ADC5_ABSOLUTE_CAL
+};
+
+enum adc5_cal_val {
+ ADC5_TIMER_CAL = 0,
+ ADC5_NEW_CAL
+};
+
+/**
+ * struct adc5_channel_prop - ADC channel property.
+ * @channel: channel number, refer to the channel list.
+ * @cal_method: calibration method.
+ * @cal_val: calibration value
+ * @decimation: sampling rate supported for the channel.
+ * @prescale: channel scaling performed on the input signal.
+ * @hw_settle_time: the time between AMUX being configured and the
+ * start of conversion.
+ * @avg_samples: ability to provide single result from the ADC
+ * that is an average of multiple measurements.
+ * @scale_fn_type: Represents the scaling function to convert voltage
+ * physical units desired by the client for the channel.
+ * @datasheet_name: Channel name used in device tree.
+ */
+struct adc5_channel_prop {
+ unsigned int channel;
+ enum adc5_cal_method cal_method;
+ enum adc5_cal_val cal_val;
+ unsigned int decimation;
+ unsigned int prescale;
+ unsigned int hw_settle_time;
+ unsigned int avg_samples;
+ enum vadc_scale_fn_type scale_fn_type;
+ const char *datasheet_name;
+};
+
+/**
+ * struct adc5_chip - ADC private structure.
+ * @regmap: SPMI ADC5 peripheral register map field.
+ * @dev: SPMI ADC5 device.
+ * @base: base address for the ADC peripheral.
+ * @nchannels: number of ADC channels.
+ * @chan_props: array of ADC channel properties.
+ * @iio_chans: array of IIO channels specification.
+ * @poll_eoc: use polling instead of interrupt.
+ * @complete: ADC result notification after interrupt is received.
+ * @lock: ADC lock for access to the peripheral.
+ * @data: software configuration data.
+ */
+struct adc5_chip {
+ struct regmap *regmap;
+ struct device *dev;
+ u16 base;
+ unsigned int nchannels;
+ struct adc5_channel_prop *chan_props;
+ struct iio_chan_spec *iio_chans;
+ bool poll_eoc;
+ struct completion complete;
+ struct mutex lock;
+ const struct adc5_data *data;
+};
+
+static const struct vadc_prescale_ratio adc5_prescale_ratios[] = {
+ {.num = 1, .den = 1},
+ {.num = 1, .den = 3},
+ {.num = 1, .den = 4},
+ {.num = 1, .den = 6},
+ {.num = 1, .den = 20},
+ {.num = 1, .den = 8},
+ {.num = 10, .den = 81},
+ {.num = 1, .den = 10},
+ {.num = 1, .den = 16}
+};
+
+static int adc5_read(struct adc5_chip *adc, u16 offset, u8 *data, int len)
+{
+ return regmap_bulk_read(adc->regmap, adc->base + offset, data, len);
+}
+
+static int adc5_write(struct adc5_chip *adc, u16 offset, u8 *data, int len)
+{
+ return regmap_bulk_write(adc->regmap, adc->base + offset, data, len);
+}
+
+static int adc5_prescaling_from_dt(u32 num, u32 den)
+{
+ unsigned int pre;
+
+ for (pre = 0; pre < ARRAY_SIZE(adc5_prescale_ratios); pre++)
+ if (adc5_prescale_ratios[pre].num == num &&
+ adc5_prescale_ratios[pre].den == den)
+ break;
+
+ if (pre == ARRAY_SIZE(adc5_prescale_ratios))
+ return -EINVAL;
+
+ return pre;
+}
+
+static int adc5_hw_settle_time_from_dt(u32 value,
+ const unsigned int *hw_settle)
+{
+ unsigned int i;
+
+ for (i = 0; i < VADC_HW_SETTLE_SAMPLES_MAX; i++) {
+ if (value == hw_settle[i])
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int adc5_avg_samples_from_dt(u32 value)
+{
+ if (!is_power_of_2(value) || value > ADC5_AVG_SAMPLES_MAX)
+ return -EINVAL;
+
+ return __ffs(value);
+}
+
+static int adc5_decimation_from_dt(u32 value,
+ const unsigned int *decimation)
+{
+ unsigned int i;
+
+ for (i = 0; i < ADC5_DECIMATION_SAMPLES_MAX; i++) {
+ if (value == decimation[i])
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data)
+{
+ int ret;
+ u8 rslt_lsb, rslt_msb;
+
+ ret = adc5_read(adc, ADC5_USR_DATA0, &rslt_lsb, sizeof(rslt_lsb));
+ if (ret)
+ return ret;
+
+ ret = adc5_read(adc, ADC5_USR_DATA1, &rslt_msb, sizeof(rslt_lsb));
+ if (ret)
+ return ret;
+
+ *data = (rslt_msb << 8) | rslt_lsb;
+
+ if (*data == ADC5_USR_DATA_CHECK) {
+ pr_err("Invalid data:0x%x\n", *data);
+ return -EINVAL;
+ }
+
+ pr_debug("voltage raw code:0x%x\n", *data);
+
+ return 0;
+}
+
+static int adc5_poll_wait_eoc(struct adc5_chip *adc)
+{
+ unsigned int count, retry = ADC5_CONV_TIME_RETRY;
+ u8 status1;
+ int ret;
+
+ for (count = 0; count < retry; count++) {
+ ret = adc5_read(adc, ADC5_USR_STATUS1, &status1,
+ sizeof(status1));
+ if (ret)
+ return ret;
+
+ status1 &= ADC5_USR_STATUS1_REQ_STS_EOC_MASK;
+ if (status1 == ADC5_USR_STATUS1_EOC)
+ return 0;
+
+ usleep_range(ADC5_CONV_TIME_MIN_US, ADC5_CONV_TIME_MAX_US);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static void adc5_update_dig_param(struct adc5_chip *adc,
+ struct adc5_channel_prop *prop, u8 *data)
+{
+ /* Update calibration value */
+ *data &= ~ADC5_USR_DIG_PARAM_CAL_VAL;
+ *data |= (prop->cal_val << ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT);
+
+ /* Update calibration select */
+ *data &= ~ADC5_USR_DIG_PARAM_CAL_SEL;
+ *data |= (prop->cal_method << ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT);
+
+ /* Update decimation ratio select */
+ *data &= ~ADC5_USR_DIG_PARAM_DEC_RATIO_SEL;
+ *data |= (prop->decimation << ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT);
+}
+
+static int adc5_configure(struct adc5_chip *adc,
+ struct adc5_channel_prop *prop)
+{
+ int ret;
+ u8 buf[6];
+
+ /* Read registers 0x42 through 0x46 */
+ ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ /* Digital param selection */
+ adc5_update_dig_param(adc, prop, &buf[0]);
+
+ /* Update fast average sample value */
+ buf[1] &= (u8) ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK;
+ buf[1] |= prop->avg_samples;
+
+ /* Select ADC channel */
+ buf[2] = prop->channel;
+
+ /* Select HW settle delay for channel */
+ buf[3] &= (u8) ~ADC5_USR_HW_SETTLE_DELAY_MASK;
+ buf[3] |= prop->hw_settle_time;
+
+ /* Select ADC enable */
+ buf[4] |= ADC5_USR_EN_CTL1_ADC_EN;
+
+ /* Select CONV request */
+ buf[5] |= ADC5_USR_CONV_REQ_REQ;
+
+ if (!adc->poll_eoc)
+ reinit_completion(&adc->complete);
+
+ return adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
+}
+
+static int adc5_do_conversion(struct adc5_chip *adc,
+ struct adc5_channel_prop *prop,
+ struct iio_chan_spec const *chan,
+ u16 *data_volt, u16 *data_cur)
+{
+ int ret;
+
+ mutex_lock(&adc->lock);
+
+ ret = adc5_configure(adc, prop);
+ if (ret) {
+ pr_err("ADC configure failed with %d\n", ret);
+ goto unlock;
+ }
+
+ if (adc->poll_eoc) {
+ ret = adc5_poll_wait_eoc(adc);
+ if (ret < 0) {
+ pr_err("EOC bit not set\n");
+ goto unlock;
+ }
+ } else {
+ ret = wait_for_completion_timeout(&adc->complete,
+ ADC5_CONV_TIMEOUT);
+ if (!ret) {
+ pr_debug("Did not get completion timeout.\n");
+ ret = adc5_poll_wait_eoc(adc);
+ if (ret < 0) {
+ pr_err("EOC bit not set\n");
+ goto unlock;
+ }
+ }
+ }
+
+ ret = adc5_read_voltage_data(adc, data_volt);
+unlock:
+ mutex_unlock(&adc->lock);
+
+ return ret;
+}
+
+static irqreturn_t adc5_isr(int irq, void *dev_id)
+{
+ struct adc5_chip *adc = dev_id;
+
+ complete(&adc->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int adc5_of_xlate(struct iio_dev *indio_dev,
+ const struct of_phandle_args *iiospec)
+{
+ struct adc5_chip *adc = iio_priv(indio_dev);
+ int i;
+
+ for (i = 0; i < adc->nchannels; i++)
+ if (adc->chan_props[i].channel == iiospec->args[0])
+ return i;
+
+ return -EINVAL;
+}
+
+static int adc5_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2,
+ long mask)
+{
+ struct adc5_chip *adc = iio_priv(indio_dev);
+ struct adc5_channel_prop *prop;
+ u16 adc_code_volt, adc_code_cur;
+ int ret;
+
+ prop = &adc->chan_props[chan->address];
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = adc5_do_conversion(adc, prop, chan,
+ &adc_code_volt, &adc_code_cur);
+ if (ret)
+ return ret;
+
+ ret = qcom_adc5_hw_scale(prop->scale_fn_type,
+ &adc5_prescale_ratios[prop->prescale],
+ adc->data,
+ adc_code_volt, val);
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct iio_info adc5_info = {
+ .read_raw = adc5_read_raw,
+ .of_xlate = adc5_of_xlate,
+};
+
+struct adc5_channels {
+ const char *datasheet_name;
+ unsigned int prescale_index;
+ enum iio_chan_type type;
+ long info_mask;
+ enum vadc_scale_fn_type scale_fn_type;
+};
+
+/* In these definitions, _pre refers to an index into adc5_prescale_ratios. */
+#define ADC5_CHAN(_dname, _type, _mask, _pre, _scale) \
+ { \
+ .datasheet_name = _dname, \
+ .prescale_index = _pre, \
+ .type = _type, \
+ .info_mask = _mask, \
+ .scale_fn_type = _scale, \
+ }, \
+
+#define ADC5_CHAN_TEMP(_dname, _pre, _scale) \
+ ADC5_CHAN(_dname, IIO_TEMP, \
+ BIT(IIO_CHAN_INFO_PROCESSED), \
+ _pre, _scale) \
+
+#define ADC5_CHAN_VOLT(_dname, _pre, _scale) \
+ ADC5_CHAN(_dname, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_PROCESSED), \
+ _pre, _scale) \
+
+static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
+ [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0,
+ SCALE_HW_CALIB_PMIC_THERM)
+ [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_USB_IN_V_16] = ADC5_CHAN_VOLT("usb_in_v_div_16", 8,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_CHG_TEMP] = ADC5_CHAN_TEMP("chg_temp", 0,
+ SCALE_HW_CALIB_PM5_CHG_TEMP)
+ /* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */
+ [ADC5_SBUx] = ADC5_CHAN_VOLT("chg_sbux", 1,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_MID_CHG_DIV6] = ADC5_CHAN_VOLT("chg_mid_chg", 3,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm", 0,
+ SCALE_HW_CALIB_XOTHERM)
+ [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0,
+ SCALE_HW_CALIB_PM5_SMB_TEMP)
+};
+
+static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
+ [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1,
+ SCALE_HW_CALIB_DEFAULT)
+ [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0,
+ SCALE_HW_CALIB_PMIC_THERM)
+ [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+};
+
+static int adc5_get_dt_channel_data(struct adc5_chip *adc,
+ struct adc5_channel_prop *prop,
+ struct device_node *node,
+ const struct adc5_data *data)
+{
+ const char *name = node->name, *channel_name;
+ u32 chan, value, varr[2];
+ int ret;
+ struct device *dev = adc->dev;
+
+ ret = of_property_read_u32(node, "reg", &chan);
+ if (ret) {
+ dev_err(dev, "invalid channel number %s\n", name);
+ return ret;
+ }
+
+ if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA ||
+ !data->adc_chans[chan].datasheet_name) {
+ dev_err(dev, "%s invalid channel number %d\n", name, chan);
+ return -EINVAL;
+ }
+
+ /* the channel has DT description */
+ prop->channel = chan;
+
+ channel_name = of_get_property(node,
+ "label", NULL) ? : node->name;
+ if (!channel_name) {
+ pr_err("Invalid channel name\n");
+ return -EINVAL;
+ }
+ prop->datasheet_name = channel_name;
+
+ ret = of_property_read_u32(node, "qcom,decimation", &value);
+ if (!ret) {
+ ret = adc5_decimation_from_dt(value, data->decimation);
+ if (ret < 0) {
+ dev_err(dev, "%02x invalid decimation %d\n",
+ chan, value);
+ return ret;
+ }
+ prop->decimation = ret;
+ } else {
+ prop->decimation = ADC5_DECIMATION_DEFAULT;
+ }
+
+ ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+ if (!ret) {
+ ret = adc5_prescaling_from_dt(varr[0], varr[1]);
+ if (ret < 0) {
+ dev_err(dev, "%02x invalid pre-scaling <%d %d>\n",
+ chan, varr[0], varr[1]);
+ return ret;
+ }
+ prop->prescale = ret;
+ } else {
+ prop->prescale =
+ adc->data->adc_chans[prop->channel].prescale_index;
+ }
+
+ ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+ if (!ret) {
+ u8 dig_version[2];
+
+ ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version,
+ sizeof(dig_version));
+ if (ret < 0) {
+ dev_err(dev, "Invalid dig version read %d\n", ret);
+ return ret;
+ }
+
+ pr_debug("dig_ver:minor:%d, major:%d\n", dig_version[0],
+ dig_version[1]);
+ /* Digital controller >= 5.3 have hw_settle_2 option */
+ if (dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
+ dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR)
+ ret = adc5_hw_settle_time_from_dt(value,
+ data->hw_settle_2);
+ else
+ ret = adc5_hw_settle_time_from_dt(value,
+ data->hw_settle_1);
+
+ if (ret < 0) {
+ dev_err(dev, "%02x invalid hw-settle-time %d us\n",
+ chan, value);
+ return ret;
+ }
+ prop->hw_settle_time = ret;
+ } else {
+ prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
+ }
+
+ ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+ if (!ret) {
+ ret = adc5_avg_samples_from_dt(value);
+ if (ret < 0) {
+ dev_err(dev, "%02x invalid avg-samples %d\n",
+ chan, value);
+ return ret;
+ }
+ prop->avg_samples = ret;
+ } else {
+ prop->avg_samples = VADC_DEF_AVG_SAMPLES;
+ }
+
+ if (of_property_read_bool(node, "qcom,ratiometric"))
+ prop->cal_method = ADC5_RATIOMETRIC_CAL;
+ else
+ prop->cal_method = ADC5_ABSOLUTE_CAL;
+
+ /*
+ * Default to using timer calibration. Using a fresh calibration value
+ * for every conversion will increase the overall time for a request.
+ */
+ prop->cal_val = ADC5_TIMER_CAL;
+
+ dev_dbg(dev, "%02x name %s\n", chan, name);
+
+ return 0;
+}
+
+static const struct adc5_data adc5_data_pmic = {
+ .full_scale_code_volt = 0x70e4,
+ .full_scale_code_cur = 0x2710,
+ .adc_chans = adc5_chans_pmic,
+ .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
+ {250, 420, 840},
+ .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+ {15, 100, 200, 300, 400, 500, 600, 700,
+ 800, 900, 1, 2, 4, 6, 8, 10},
+ .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+ {15, 100, 200, 300, 400, 500, 600, 700,
+ 1, 2, 4, 8, 16, 32, 64, 128},
+};
+
+static const struct adc5_data adc5_data_pmic_rev2 = {
+ .full_scale_code_volt = 0x4000,
+ .full_scale_code_cur = 0x1800,
+ .adc_chans = adc5_chans_rev2,
+ .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
+ {256, 512, 1024},
+ .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+ {0, 100, 200, 300, 400, 500, 600, 700,
+ 800, 900, 1, 2, 4, 6, 8, 10},
+ .hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+ {15, 100, 200, 300, 400, 500, 600, 700,
+ 1, 2, 4, 8, 16, 32, 64, 128},
+};
+
+static const struct of_device_id adc5_match_table[] = {
+ {
+ .compatible = "qcom,spmi-adc5",
+ .data = &adc5_data_pmic,
+ },
+ {
+ .compatible = "qcom,spmi-adc-rev2",
+ .data = &adc5_data_pmic_rev2,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adc5_match_table);
+
+static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
+{
+ const struct adc5_channels *adc_chan;
+ struct iio_chan_spec *iio_chan;
+ struct adc5_channel_prop prop, *chan_props;
+ struct device_node *child;
+ unsigned int index = 0;
+ const struct of_device_id *id;
+ const struct adc5_data *data;
+ int ret;
+
+ adc->nchannels = of_get_available_child_count(node);
+ if (!adc->nchannels)
+ return -EINVAL;
+
+ adc->iio_chans = devm_kcalloc(adc->dev, adc->nchannels,
+ sizeof(*adc->iio_chans), GFP_KERNEL);
+ if (!adc->iio_chans)
+ return -ENOMEM;
+
+ adc->chan_props = devm_kcalloc(adc->dev, adc->nchannels,
+ sizeof(*adc->chan_props), GFP_KERNEL);
+ if (!adc->chan_props)
+ return -ENOMEM;
+
+ chan_props = adc->chan_props;
+ iio_chan = adc->iio_chans;
+ id = of_match_node(adc5_match_table, node);
+ if (id)
+ data = id->data;
+ else
+ data = &adc5_data_pmic;
+ adc->data = data;
+
+ for_each_available_child_of_node(node, child) {
+ ret = adc5_get_dt_channel_data(adc, &prop, child, data);
+ if (ret) {
+ of_node_put(child);
+ return ret;
+ }
+
+ prop.scale_fn_type =
+ data->adc_chans[prop.channel].scale_fn_type;
+ *chan_props = prop;
+ adc_chan = &data->adc_chans[prop.channel];
+
+ iio_chan->channel = prop.channel;
+ iio_chan->datasheet_name = prop.datasheet_name;
+ iio_chan->extend_name = prop.datasheet_name;
+ iio_chan->info_mask_separate = adc_chan->info_mask;
+ iio_chan->type = adc_chan->type;
+ iio_chan->address = index;
+ iio_chan++;
+ chan_props++;
+ index++;
+ }
+
+ return 0;
+}
+
+static int adc5_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct iio_dev *indio_dev;
+ struct adc5_chip *adc;
+ struct regmap *regmap;
+ int ret, irq_eoc;
+ u32 reg;
+
+ regmap = dev_get_regmap(dev->parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ ret = of_property_read_u32(node, "reg", ®);
+ if (ret < 0)
+ return ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ adc = iio_priv(indio_dev);
+ adc->regmap = regmap;
+ adc->dev = dev;
+ adc->base = reg;
+ init_completion(&adc->complete);
+ mutex_init(&adc->lock);
+
+ ret = adc5_get_dt_data(adc, node);
+ if (ret) {
+ pr_err("adc get dt data failed\n");
+ return ret;
+ }
+
+ irq_eoc = platform_get_irq(pdev, 0);
+ if (irq_eoc < 0) {
+ if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL)
+ return irq_eoc;
+ adc->poll_eoc = true;
+ } else {
+ ret = devm_request_irq(dev, irq_eoc, adc5_isr, 0,
+ "pm-adc5", adc);
+ if (ret)
+ return ret;
+ }
+
+ indio_dev->dev.parent = dev;
+ indio_dev->dev.of_node = node;
+ indio_dev->name = pdev->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &adc5_info;
+ indio_dev->channels = adc->iio_chans;
+ indio_dev->num_channels = adc->nchannels;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static struct platform_driver adc5_driver = {
+ .driver = {
+ .name = "qcom-spmi-adc5.c",
+ .of_match_table = adc5_match_table,
+ },
+ .probe = adc5_probe,
+};
+module_platform_driver(adc5_driver);
+
+MODULE_ALIAS("platform:qcom-spmi-adc5");
+MODULE_DESCRIPTION("Qualcomm Technologies Inc. PMIC5 ADC driver");
+MODULE_LICENSE("GPL v2");