Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/hid/i2c-hid/Kconfig b/drivers/hid/i2c-hid/Kconfig
index b66617a..0e2ae47 100644
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
menu "I2C HID support"
depends on I2C
diff --git a/drivers/hid/i2c-hid/Makefile b/drivers/hid/i2c-hid/Makefile
index 832d8f9..681b389 100644
--- a/drivers/hid/i2c-hid/Makefile
+++ b/drivers/hid/i2c-hid/Makefile
@@ -1,5 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the I2C input drivers
#
obj-$(CONFIG_I2C_HID) += i2c-hid.o
+
+i2c-hid-objs = i2c-hid-core.o
+i2c-hid-$(CONFIG_DMI) += i2c-hid-dmi-quirks.o
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid-core.c
similarity index 89%
rename from drivers/hid/i2c-hid/i2c-hid.c
rename to drivers/hid/i2c-hid/i2c-hid-core.c
index 88daa38..04c0881 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -26,7 +26,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
-#include <linux/pm_runtime.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/err.h>
@@ -43,12 +42,12 @@
#include <linux/platform_data/i2c-hid.h>
#include "../hid-ids.h"
+#include "i2c-hid.h"
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
-#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
-#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
+#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
/* flags */
#define I2C_HID_STARTED 0
@@ -167,15 +166,12 @@
__u16 idProduct;
__u32 quirks;
} i2c_hid_quirks[] = {
- { USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8752,
- I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
- { USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
+ { USB_VENDOR_ID_WEIDA, HID_ANY_ID,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
- I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
- I2C_HID_QUIRK_NO_RUNTIME_PM },
- { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
- I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
+ I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
+ { USB_VENDOR_ID_ELAN, HID_ANY_ID,
+ I2C_HID_QUIRK_BOGUS_IRQ },
{ 0, 0 }
};
@@ -391,7 +387,6 @@
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
- unsigned long now, delay;
i2c_hid_dbg(ihid, "%s\n", __func__);
@@ -409,22 +404,9 @@
goto set_pwr_exit;
}
- if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
- power_state == I2C_HID_PWR_ON) {
- now = jiffies;
- if (time_after(ihid->sleep_delay, now)) {
- delay = jiffies_to_usecs(ihid->sleep_delay - now);
- usleep_range(delay, delay + 1);
- }
- }
-
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
- if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
- power_state == I2C_HID_PWR_SLEEP)
- ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
-
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
@@ -465,8 +447,12 @@
if (ret) {
dev_err(&client->dev, "failed to reset device.\n");
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ goto out_unlock;
}
+ /* At least some SIS devices need this after reset */
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+
out_unlock:
mutex_unlock(&ihid->reset_lock);
return ret;
@@ -500,6 +486,12 @@
return;
}
+ if (ihid->quirks & I2C_HID_QUIRK_BOGUS_IRQ && ret_size == 0xffff) {
+ dev_warn_once(&ihid->client->dev, "%s: IRQ triggered but "
+ "there's no data\n", __func__);
+ return;
+ }
+
if ((ret_size > size) || (ret_size < 2)) {
dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n",
__func__, size, ret_size);
@@ -687,6 +679,7 @@
char *rdesc;
int ret;
int tries = 3;
+ char *use_override;
i2c_hid_dbg(ihid, "entering %s\n", __func__);
@@ -705,26 +698,37 @@
if (ret)
return ret;
- rdesc = kzalloc(rsize, GFP_KERNEL);
+ use_override = i2c_hid_get_dmi_hid_report_desc_override(client->name,
+ &rsize);
- if (!rdesc) {
- dbg_hid("couldn't allocate rdesc memory\n");
- return -ENOMEM;
- }
+ if (use_override) {
+ rdesc = use_override;
+ i2c_hid_dbg(ihid, "Using a HID report descriptor override\n");
+ } else {
+ rdesc = kzalloc(rsize, GFP_KERNEL);
- i2c_hid_dbg(ihid, "asking HID report descriptor\n");
+ if (!rdesc) {
+ dbg_hid("couldn't allocate rdesc memory\n");
+ return -ENOMEM;
+ }
- ret = i2c_hid_command(client, &hid_report_descr_cmd, rdesc, rsize);
- if (ret) {
- hid_err(hid, "reading report descriptor failed\n");
- kfree(rdesc);
- return -EIO;
+ i2c_hid_dbg(ihid, "asking HID report descriptor\n");
+
+ ret = i2c_hid_command(client, &hid_report_descr_cmd,
+ rdesc, rsize);
+ if (ret) {
+ hid_err(hid, "reading report descriptor failed\n");
+ kfree(rdesc);
+ return -EIO;
+ }
}
i2c_hid_dbg(ihid, "Report Descriptor: %*ph\n", rsize, rdesc);
ret = hid_parse_report(hid, rdesc, rsize);
- kfree(rdesc);
+ if (!use_override)
+ kfree(rdesc);
+
if (ret) {
dbg_hid("parsing report descriptor failed\n");
return ret;
@@ -767,11 +771,6 @@
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
- int ret = 0;
-
- ret = pm_runtime_get_sync(&client->dev);
- if (ret < 0)
- return ret;
set_bit(I2C_HID_STARTED, &ihid->flags);
return 0;
@@ -783,27 +782,6 @@
struct i2c_hid *ihid = i2c_get_clientdata(client);
clear_bit(I2C_HID_STARTED, &ihid->flags);
-
- /* Save some power */
- pm_runtime_put(&client->dev);
-}
-
-static int i2c_hid_power(struct hid_device *hid, int lvl)
-{
- struct i2c_client *client = hid->driver_data;
- struct i2c_hid *ihid = i2c_get_clientdata(client);
-
- i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl);
-
- switch (lvl) {
- case PM_HINT_FULLON:
- pm_runtime_get_sync(&client->dev);
- break;
- case PM_HINT_NORMAL:
- pm_runtime_put(&client->dev);
- break;
- }
- return 0;
}
struct hid_ll_driver i2c_hid_ll_driver = {
@@ -812,7 +790,6 @@
.stop = i2c_hid_stop,
.open = i2c_hid_open,
.close = i2c_hid_close,
- .power = i2c_hid_power,
.output_report = i2c_hid_output_report,
.raw_request = i2c_hid_raw_request,
};
@@ -851,12 +828,19 @@
int ret;
/* i2c hid fetch using a fixed descriptor size (30 bytes) */
- i2c_hid_dbg(ihid, "Fetching the HID descriptor\n");
- ret = i2c_hid_command(client, &hid_descr_cmd, ihid->hdesc_buffer,
- sizeof(struct i2c_hid_desc));
- if (ret) {
- dev_err(&client->dev, "hid_descr_cmd failed\n");
- return -ENODEV;
+ if (i2c_hid_get_dmi_i2c_hid_desc_override(client->name)) {
+ i2c_hid_dbg(ihid, "Using a HID descriptor override\n");
+ ihid->hdesc =
+ *i2c_hid_get_dmi_i2c_hid_desc_override(client->name);
+ } else {
+ i2c_hid_dbg(ihid, "Fetching the HID descriptor\n");
+ ret = i2c_hid_command(client, &hid_descr_cmd,
+ ihid->hdesc_buffer,
+ sizeof(struct i2c_hid_desc));
+ if (ret) {
+ dev_err(&client->dev, "hid_descr_cmd failed\n");
+ return -ENODEV;
+ }
}
/* Validate the length of HID descriptor, the 4 first bytes:
@@ -1073,9 +1057,6 @@
i2c_hid_acpi_fix_up_power(&client->dev);
- pm_runtime_get_noresume(&client->dev);
- pm_runtime_set_active(&client->dev);
- pm_runtime_enable(&client->dev);
device_enable_async_suspend(&client->dev);
/* Make sure there is something at this address */
@@ -1083,16 +1064,16 @@
if (ret < 0) {
dev_dbg(&client->dev, "nothing at this address: %d\n", ret);
ret = -ENXIO;
- goto err_pm;
+ goto err_regulator;
}
ret = i2c_hid_fetch_hid_descriptor(ihid);
if (ret < 0)
- goto err_pm;
+ goto err_regulator;
ret = i2c_hid_init_irq(client);
if (ret < 0)
- goto err_pm;
+ goto err_regulator;
hid = hid_allocate_device();
if (IS_ERR(hid)) {
@@ -1123,9 +1104,6 @@
goto err_mem_free;
}
- if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM))
- pm_runtime_put(&client->dev);
-
return 0;
err_mem_free:
@@ -1134,10 +1112,6 @@
err_irq:
free_irq(client->irq, ihid);
-err_pm:
- pm_runtime_put_noidle(&client->dev);
- pm_runtime_disable(&client->dev);
-
err_regulator:
regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
ihid->pdata.supplies);
@@ -1150,12 +1124,6 @@
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
- if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM))
- pm_runtime_get_sync(&client->dev);
- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
- pm_runtime_put_noidle(&client->dev);
-
hid = ihid->hid;
hid_destroy_device(hid);
@@ -1188,25 +1156,15 @@
int wake_status;
if (hid->driver && hid->driver->suspend) {
- /*
- * Wake up the device so that IO issues in
- * HID driver's suspend code can succeed.
- */
- ret = pm_runtime_resume(dev);
- if (ret < 0)
- return ret;
-
ret = hid->driver->suspend(hid, PMSG_SUSPEND);
if (ret < 0)
return ret;
}
- if (!pm_runtime_suspended(dev)) {
- /* Save some power */
- i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ /* Save some power */
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
- disable_irq(client->irq);
- }
+ disable_irq(client->irq);
if (device_may_wakeup(&client->dev)) {
wake_status = enable_irq_wake(client->irq);
@@ -1248,11 +1206,6 @@
wake_status);
}
- /* We'll resume to full power */
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
-
enable_irq(client->irq);
/* Instead of resetting device, simply powers the device on. This
@@ -1273,30 +1226,8 @@
}
#endif
-#ifdef CONFIG_PM
-static int i2c_hid_runtime_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
- disable_irq(client->irq);
- return 0;
-}
-
-static int i2c_hid_runtime_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- enable_irq(client->irq);
- i2c_hid_set_power(client, I2C_HID_PWR_ON);
- return 0;
-}
-#endif
-
static const struct dev_pm_ops i2c_hid_pm = {
SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_suspend, i2c_hid_resume)
- SET_RUNTIME_PM_OPS(i2c_hid_runtime_suspend, i2c_hid_runtime_resume,
- NULL)
};
static const struct i2c_device_id i2c_hid_id_table[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
new file mode 100644
index 0000000..d31ea82
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Quirks for I2C-HID devices that do not supply proper descriptors
+ *
+ * Copyright (c) 2018 Julian Sax <jsbc@gmx.de>
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/dmi.h>
+#include <linux/mod_devicetable.h>
+
+#include "i2c-hid.h"
+
+
+struct i2c_hid_desc_override {
+ union {
+ struct i2c_hid_desc *i2c_hid_desc;
+ uint8_t *i2c_hid_desc_buffer;
+ };
+ uint8_t *hid_report_desc;
+ unsigned int hid_report_desc_size;
+ uint8_t *i2c_name;
+};
+
+
+/*
+ * descriptors for the SIPODEV SP1064 touchpad
+ *
+ * This device does not supply any descriptors and on windows a filter
+ * driver operates between the i2c-hid layer and the device and injects
+ * these descriptors when the device is prompted. The descriptors were
+ * extracted by listening to the i2c-hid traffic that occurs between the
+ * windows filter driver and the windows i2c-hid driver.
+ */
+
+static const struct i2c_hid_desc_override sipodev_desc = {
+ .i2c_hid_desc_buffer = (uint8_t [])
+ {0x1e, 0x00, /* Length of descriptor */
+ 0x00, 0x01, /* Version of descriptor */
+ 0xdb, 0x01, /* Length of report descriptor */
+ 0x21, 0x00, /* Location of report descriptor */
+ 0x24, 0x00, /* Location of input report */
+ 0x1b, 0x00, /* Max input report length */
+ 0x25, 0x00, /* Location of output report */
+ 0x11, 0x00, /* Max output report length */
+ 0x22, 0x00, /* Location of command register */
+ 0x23, 0x00, /* Location of data register */
+ 0x11, 0x09, /* Vendor ID */
+ 0x88, 0x52, /* Product ID */
+ 0x06, 0x00, /* Version ID */
+ 0x00, 0x00, 0x00, 0x00 /* Reserved */
+ },
+
+ .hid_report_desc = (uint8_t [])
+ {0x05, 0x01, /* Usage Page (Desktop), */
+ 0x09, 0x02, /* Usage (Mouse), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x01, /* Report ID (1), */
+ 0x09, 0x01, /* Usage (Pointer), */
+ 0xA1, 0x00, /* Collection (Physical), */
+ 0x05, 0x09, /* Usage Page (Button), */
+ 0x19, 0x01, /* Usage Minimum (01h), */
+ 0x29, 0x02, /* Usage Maximum (02h), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x06, /* Report Count (6), */
+ 0x81, 0x01, /* Input (Constant), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x15, 0x81, /* Logical Minimum (-127), */
+ 0x25, 0x7F, /* Logical Maximum (127), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x81, 0x06, /* Input (Variable, Relative), */
+ 0xC0, /* End Collection, */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x05, /* Usage (Touchpad), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x04, /* Report ID (4), */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x22, /* Usage (Finger), */
+ 0xA1, 0x02, /* Collection (Logical), */
+ 0x15, 0x00, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x09, 0x47, /* Usage (Touch Valid), */
+ 0x09, 0x42, /* Usage (Tip Switch), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x75, 0x03, /* Report Size (3), */
+ 0x25, 0x05, /* Logical Maximum (5), */
+ 0x09, 0x51, /* Usage (Contact Identifier), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x55, 0x0E, /* Unit Exponent (14), */
+ 0x65, 0x11, /* Unit (Centimeter), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x46, 0xBC, 0x02, /* Physical Maximum (700), */
+ 0x26, 0x34, 0x05, /* Logical Maximum (1332), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x22, /* Usage (Finger), */
+ 0xA1, 0x02, /* Collection (Logical), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x09, 0x47, /* Usage (Touch Valid), */
+ 0x09, 0x42, /* Usage (Tip Switch), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x75, 0x03, /* Report Size (3), */
+ 0x25, 0x05, /* Logical Maximum (5), */
+ 0x09, 0x51, /* Usage (Contact Identifier), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x46, 0xBC, 0x02, /* Physical Maximum (700), */
+ 0x26, 0x34, 0x05, /* Logical Maximum (1332), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x22, /* Usage (Finger), */
+ 0xA1, 0x02, /* Collection (Logical), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x09, 0x47, /* Usage (Touch Valid), */
+ 0x09, 0x42, /* Usage (Tip Switch), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x75, 0x03, /* Report Size (3), */
+ 0x25, 0x05, /* Logical Maximum (5), */
+ 0x09, 0x51, /* Usage (Contact Identifier), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x46, 0xBC, 0x02, /* Physical Maximum (700), */
+ 0x26, 0x34, 0x05, /* Logical Maximum (1332), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x22, /* Usage (Finger), */
+ 0xA1, 0x02, /* Collection (Logical), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x09, 0x47, /* Usage (Touch Valid), */
+ 0x09, 0x42, /* Usage (Tip Switch), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x75, 0x03, /* Report Size (3), */
+ 0x25, 0x05, /* Logical Maximum (5), */
+ 0x09, 0x51, /* Usage (Contact Identifier), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x26, 0x44, 0x0A, /* Logical Maximum (2628), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x46, 0x1A, 0x04, /* Physical Maximum (1050), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x46, 0xBC, 0x02, /* Physical Maximum (700), */
+ 0x26, 0x34, 0x05, /* Logical Maximum (1332), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x55, 0x0C, /* Unit Exponent (12), */
+ 0x66, 0x01, 0x10, /* Unit (Seconds), */
+ 0x47, 0xFF, 0xFF, 0x00, 0x00,/* Physical Maximum (65535), */
+ 0x27, 0xFF, 0xFF, 0x00, 0x00,/* Logical Maximum (65535), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x09, 0x56, /* Usage (Scan Time), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x54, /* Usage (Contact Count), */
+ 0x25, 0x7F, /* Logical Maximum (127), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x05, 0x09, /* Usage Page (Button), */
+ 0x09, 0x01, /* Usage (01h), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x07, /* Report Count (7), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x85, 0x02, /* Report ID (2), */
+ 0x09, 0x55, /* Usage (Contact Count Maximum), */
+ 0x09, 0x59, /* Usage (59h), */
+ 0x75, 0x04, /* Report Size (4), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x25, 0x0F, /* Logical Maximum (15), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x85, 0x07, /* Report ID (7), */
+ 0x09, 0x60, /* Usage (60h), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x95, 0x07, /* Report Count (7), */
+ 0xB1, 0x03, /* Feature (Constant, Variable), */
+ 0x85, 0x06, /* Report ID (6), */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x09, 0xC5, /* Usage (C5h), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x96, 0x00, 0x01, /* Report Count (256), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0xC0, /* End Collection, */
+ 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
+ 0x09, 0x01, /* Usage (01h), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x0D, /* Report ID (13), */
+ 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
+ 0x19, 0x01, /* Usage Minimum (01h), */
+ 0x29, 0x02, /* Usage Maximum (02h), */
+ 0x75, 0x08, /* Report Size (8), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0xC0, /* End Collection, */
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x0E, /* Usage (Configuration), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x03, /* Report ID (3), */
+ 0x09, 0x22, /* Usage (Finger), */
+ 0xA1, 0x02, /* Collection (Logical), */
+ 0x09, 0x52, /* Usage (Device Mode), */
+ 0x25, 0x0A, /* Logical Maximum (10), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0xC0, /* End Collection, */
+ 0x09, 0x22, /* Usage (Finger), */
+ 0xA1, 0x00, /* Collection (Physical), */
+ 0x85, 0x05, /* Report ID (5), */
+ 0x09, 0x57, /* Usage (57h), */
+ 0x09, 0x58, /* Usage (58h), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x95, 0x02, /* Report Count (2), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0xB1, 0x02, /* Feature (Variable), */
+ 0x95, 0x06, /* Report Count (6), */
+ 0xB1, 0x03, /* Feature (Constant, Variable),*/
+ 0xC0, /* End Collection, */
+ 0xC0 /* End Collection */
+ },
+ .hid_report_desc_size = 475,
+ .i2c_name = "SYNA3602:00"
+};
+
+
+static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
+ {
+ .ident = "Teclast F6 Pro",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TECLAST"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "F6 Pro"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Teclast F7",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TECLAST"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "F7"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Trekstor Primebook C13",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C13"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Trekstor Primebook C11",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C11"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ /*
+ * There are at least 2 Primebook C11B versions, the older
+ * version has a product-name of "Primebook C11B", and a
+ * bios version / release / firmware revision of:
+ * V2.1.2 / 05/03/2018 / 18.2
+ * The new version has "PRIMEBOOK C11B" as product-name and a
+ * bios version / release / firmware revision of:
+ * CFALKSW05_BIOS_V1.1.2 / 11/19/2018 / 19.2
+ * Only the older version needs this quirk, note the newer
+ * version will not match as it has a different product-name.
+ */
+ .ident = "Trekstor Primebook C11B",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Primebook C11B"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Direkt-Tek DTLAPY116-2",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY116-2"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Direkt-Tek DTLAPY133-1",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Direkt-Tek"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "DTLAPY133-1"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Mediacom Flexbook Edge 11",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "Odys Winbook 13",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AXDIA International GmbH"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "WINBOOK 13"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ {
+ .ident = "iBall Aer3",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "iBall"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Aer3"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
+ { } /* Terminate list */
+};
+
+
+struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
+{
+ struct i2c_hid_desc_override *override;
+ const struct dmi_system_id *system_id;
+
+ system_id = dmi_first_match(i2c_hid_dmi_desc_override_table);
+ if (!system_id)
+ return NULL;
+
+ override = system_id->driver_data;
+ if (strcmp(override->i2c_name, i2c_name))
+ return NULL;
+
+ return override->i2c_hid_desc;
+}
+
+char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
+ unsigned int *size)
+{
+ struct i2c_hid_desc_override *override;
+ const struct dmi_system_id *system_id;
+
+ system_id = dmi_first_match(i2c_hid_dmi_desc_override_table);
+ if (!system_id)
+ return NULL;
+
+ override = system_id->driver_data;
+ if (strcmp(override->i2c_name, i2c_name))
+ return NULL;
+
+ *size = override->hid_report_desc_size;
+ return override->hid_report_desc;
+}
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
new file mode 100644
index 0000000..a8c19ae
--- /dev/null
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef I2C_HID_H
+#define I2C_HID_H
+
+
+#ifdef CONFIG_DMI
+struct i2c_hid_desc *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name);
+char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
+ unsigned int *size);
+#else
+static inline struct i2c_hid_desc
+ *i2c_hid_get_dmi_i2c_hid_desc_override(uint8_t *i2c_name)
+{ return NULL; }
+static inline char *i2c_hid_get_dmi_hid_report_desc_override(uint8_t *i2c_name,
+ unsigned int *size)
+{ return NULL; }
+#endif
+
+#endif