Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index dba3922..90bf774 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -1,32 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
*
* Copyright (C) 2010 Extreme Engineering Solutions.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
#include <linux/ioport.h>
+#include <linux/mfd/lpc_ich.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/gpio/driver.h>
#include <linux/platform_device.h>
-#include <linux/mfd/lpc_ich.h>
-#include <linux/bitops.h>
#define DRV_NAME "gpio_ich"
@@ -100,7 +86,7 @@
static struct {
spinlock_t lock;
- struct platform_device *dev;
+ struct device *dev;
struct gpio_chip chip;
struct resource *gpio_base; /* GPIO IO base */
struct resource *pm_base; /* Power Mangagment IO base */
@@ -112,8 +98,7 @@
static int modparam_gpiobase = -1; /* dynamic */
module_param_named(gpiobase, modparam_gpiobase, int, 0444);
-MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, "
- "which is the default.");
+MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
static int ichx_write_bit(int reg, unsigned nr, int val, int verify)
{
@@ -121,7 +106,6 @@
u32 data, tmp;
int reg_nr = nr / 32;
int bit = nr & 0x1f;
- int ret = 0;
spin_lock_irqsave(&ichx_priv.lock, flags);
@@ -142,12 +126,10 @@
tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
ichx_priv.gpio_base);
- if (verify && data != tmp)
- ret = -EPERM;
spin_unlock_irqrestore(&ichx_priv.lock, flags);
- return ret;
+ return (verify && data != tmp) ? -EPERM : 0;
}
static int ichx_read_bit(int reg, unsigned nr)
@@ -186,10 +168,7 @@
* Try setting pin as an input and verify it worked since many pins
* are output-only.
*/
- if (ichx_write_bit(GPIO_IO_SEL, nr, 1, 1))
- return -EINVAL;
-
- return 0;
+ return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1);
}
static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
@@ -206,10 +185,7 @@
* Try setting pin as an output and verify it worked since many pins
* are input-only.
*/
- if (ichx_write_bit(GPIO_IO_SEL, nr, 0, 1))
- return -EINVAL;
-
- return 0;
+ return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1);
}
static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr)
@@ -284,7 +260,7 @@
{
chip->owner = THIS_MODULE;
chip->label = DRV_NAME;
- chip->parent = &ichx_priv.dev->dev;
+ chip->parent = ichx_priv.dev;
/* Allow chip-specific overrides of request()/get() */
chip->request = ichx_priv.desc->request ?
@@ -407,15 +383,14 @@
static int ichx_gpio_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct lpc_ich_info *ich_info = dev_get_platdata(dev);
struct resource *res_base, *res_pm;
int err;
- struct lpc_ich_info *ich_info = dev_get_platdata(&pdev->dev);
if (!ich_info)
return -ENODEV;
- ichx_priv.dev = pdev;
-
switch (ich_info->gpio_version) {
case ICH_I3100_GPIO:
ichx_priv.desc = &i3100_desc;
@@ -445,19 +420,21 @@
return -ENODEV;
}
+ ichx_priv.dev = dev;
spin_lock_init(&ichx_priv.lock);
+
res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
- ichx_priv.use_gpio = ich_info->use_gpio;
- err = ichx_gpio_request_regions(&pdev->dev, res_base, pdev->name,
- ichx_priv.use_gpio);
+ err = ichx_gpio_request_regions(dev, res_base, pdev->name,
+ ich_info->use_gpio);
if (err)
return err;
ichx_priv.gpio_base = res_base;
+ ichx_priv.use_gpio = ich_info->use_gpio;
/*
* If necessary, determine the I/O address of ACPI/power management
- * registers which are needed to read the the GPE0 register for GPI pins
+ * registers which are needed to read the GPE0 register for GPI pins
* 0 - 15 on some chipsets.
*/
if (!ichx_priv.desc->uses_gpe0)
@@ -465,13 +442,13 @@
res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0);
if (!res_pm) {
- pr_warn("ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
+ dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
goto init;
}
- if (!devm_request_region(&pdev->dev, res_pm->start,
- resource_size(res_pm), pdev->name)) {
- pr_warn("ACPI BAR is busy, GPI 0 - 15 unavailable\n");
+ if (!devm_request_region(dev, res_pm->start, resource_size(res_pm),
+ pdev->name)) {
+ dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n");
goto init;
}
@@ -481,12 +458,12 @@
ichx_gpiolib_setup(&ichx_priv.chip);
err = gpiochip_add_data(&ichx_priv.chip, NULL);
if (err) {
- pr_err("Failed to register GPIOs\n");
+ dev_err(dev, "Failed to register GPIOs\n");
return err;
}
- pr_info("GPIO from %d to %d on %s\n", ichx_priv.chip.base,
- ichx_priv.chip.base + ichx_priv.chip.ngpio - 1, DRV_NAME);
+ dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base,
+ ichx_priv.chip.base + ichx_priv.chip.ngpio - 1);
return 0;
}