Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
new file mode 100644
index 0000000..b485321
--- /dev/null
+++ b/drivers/firmware/stratix10-svc.c
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/kfifo.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/firmware/intel/stratix10-smc.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/types.h>
+
+/**
+ * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO
+ *
+ * SVC_NUM_CHANNEL - number of channel supported by service layer driver
+ *
+ * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s)
+ * from the secure world for FPGA manager to reuse, or to free the buffer(s)
+ * when all bit-stream data had be send.
+ *
+ * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status,
+ * service layer will return error to FPGA manager when timeout occurs,
+ * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
+ */
+#define SVC_NUM_DATA_IN_FIFO 32
+#define SVC_NUM_CHANNEL 2
+#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
+#define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
+
+/* stratix10 service layer clients */
+#define STRATIX10_RSU "stratix10-rsu"
+
+typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long,
+ struct arm_smccc_res *);
+struct stratix10_svc_chan;
+
+/**
+ * struct stratix10_svc - svc private data
+ * @stratix10_svc_rsu: pointer to stratix10 RSU device
+ */
+struct stratix10_svc {
+ struct platform_device *stratix10_svc_rsu;
+};
+
+/**
+ * struct stratix10_svc_sh_memory - service shared memory structure
+ * @sync_complete: state for a completion
+ * @addr: physical address of shared memory block
+ * @size: size of shared memory block
+ * @invoke_fn: function to issue secure monitor or hypervisor call
+ *
+ * This struct is used to save physical address and size of shared memory
+ * block. The shared memory blocked is allocated by secure monitor software
+ * at secure world.
+ *
+ * Service layer driver uses the physical address and size to create a memory
+ * pool, then allocates data buffer from that memory pool for service client.
+ */
+struct stratix10_svc_sh_memory {
+ struct completion sync_complete;
+ unsigned long addr;
+ unsigned long size;
+ svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct stratix10_svc_data_mem - service memory structure
+ * @vaddr: virtual address
+ * @paddr: physical address
+ * @size: size of memory
+ * @node: link list head node
+ *
+ * This struct is used in a list that keeps track of buffers which have
+ * been allocated or freed from the memory pool. Service layer driver also
+ * uses this struct to transfer physical address to virtual address.
+ */
+struct stratix10_svc_data_mem {
+ void *vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ struct list_head node;
+};
+
+/**
+ * struct stratix10_svc_data - service data structure
+ * @chan: service channel
+ * @paddr: playload physical address
+ * @size: playload size
+ * @command: service command requested by client
+ * @flag: configuration type (full or partial)
+ * @arg: args to be passed via registers and not physically mapped buffers
+ *
+ * This struct is used in service FIFO for inter-process communication.
+ */
+struct stratix10_svc_data {
+ struct stratix10_svc_chan *chan;
+ phys_addr_t paddr;
+ size_t size;
+ u32 command;
+ u32 flag;
+ u64 arg[3];
+};
+
+/**
+ * struct stratix10_svc_controller - service controller
+ * @dev: device
+ * @chans: array of service channels
+ * @num_chans: number of channels in 'chans' array
+ * @num_active_client: number of active service client
+ * @node: list management
+ * @genpool: memory pool pointing to the memory region
+ * @task: pointer to the thread task which handles SMC or HVC call
+ * @svc_fifo: a queue for storing service message data
+ * @complete_status: state for completion
+ * @svc_fifo_lock: protect access to service message data queue
+ * @invoke_fn: function to issue secure monitor call or hypervisor call
+ *
+ * This struct is used to create communication channels for service clients, to
+ * handle secure monitor or hypervisor call.
+ */
+struct stratix10_svc_controller {
+ struct device *dev;
+ struct stratix10_svc_chan *chans;
+ int num_chans;
+ int num_active_client;
+ struct list_head node;
+ struct gen_pool *genpool;
+ struct task_struct *task;
+ struct kfifo svc_fifo;
+ struct completion complete_status;
+ spinlock_t svc_fifo_lock;
+ svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct stratix10_svc_chan - service communication channel
+ * @ctrl: pointer to service controller which is the provider of this channel
+ * @scl: pointer to service client which owns the channel
+ * @name: service client name associated with the channel
+ * @lock: protect access to the channel
+ *
+ * This struct is used by service client to communicate with service layer, each
+ * service client has its own channel created by service controller.
+ */
+struct stratix10_svc_chan {
+ struct stratix10_svc_controller *ctrl;
+ struct stratix10_svc_client *scl;
+ char *name;
+ spinlock_t lock;
+};
+
+static LIST_HEAD(svc_ctrl);
+static LIST_HEAD(svc_data_mem);
+
+/**
+ * svc_pa_to_va() - translate physical address to virtual address
+ * @addr: to be translated physical address
+ *
+ * Return: valid virtual address or NULL if the provided physical
+ * address doesn't exist.
+ */
+static void *svc_pa_to_va(unsigned long addr)
+{
+ struct stratix10_svc_data_mem *pmem;
+
+ pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr);
+ list_for_each_entry(pmem, &svc_data_mem, node)
+ if (pmem->paddr == addr)
+ return pmem->vaddr;
+
+ /* physical address is not found */
+ return NULL;
+}
+
+/**
+ * svc_thread_cmd_data_claim() - claim back buffer from the secure world
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Claim back the submitted buffers from the secure world and pass buffer
+ * back to service client (FPGA manager, etc) for reuse.
+ */
+static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl,
+ struct stratix10_svc_data *p_data,
+ struct stratix10_svc_cb_data *cb_data)
+{
+ struct arm_smccc_res res;
+ unsigned long timeout;
+
+ reinit_completion(&ctrl->complete_status);
+ timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS);
+
+ pr_debug("%s: claim back the submitted buffer\n", __func__);
+ do {
+ ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
+ 0, 0, 0, 0, 0, 0, 0, &res);
+
+ if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+ if (!res.a1) {
+ complete(&ctrl->complete_status);
+ break;
+ }
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_DONE);
+ cb_data->kaddr1 = svc_pa_to_va(res.a1);
+ cb_data->kaddr2 = (res.a2) ?
+ svc_pa_to_va(res.a2) : NULL;
+ cb_data->kaddr3 = (res.a3) ?
+ svc_pa_to_va(res.a3) : NULL;
+ p_data->chan->scl->receive_cb(p_data->chan->scl,
+ cb_data);
+ } else {
+ pr_debug("%s: secure world busy, polling again\n",
+ __func__);
+ }
+ } while (res.a0 == INTEL_SIP_SMC_STATUS_OK ||
+ res.a0 == INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY ||
+ wait_for_completion_timeout(&ctrl->complete_status, timeout));
+}
+
+/**
+ * svc_thread_cmd_config_status() - check configuration status
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Check whether the secure firmware at secure world has finished the FPGA
+ * configuration, and then inform FPGA manager the configuration status.
+ */
+static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
+ struct stratix10_svc_data *p_data,
+ struct stratix10_svc_cb_data *cb_data)
+{
+ struct arm_smccc_res res;
+ int count_in_sec;
+
+ cb_data->kaddr1 = NULL;
+ cb_data->kaddr2 = NULL;
+ cb_data->kaddr3 = NULL;
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_ERROR);
+
+ pr_debug("%s: polling config status\n", __func__);
+
+ count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC;
+ while (count_in_sec) {
+ ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE,
+ 0, 0, 0, 0, 0, 0, 0, &res);
+ if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) ||
+ (res.a0 == INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR))
+ break;
+
+ /*
+ * configuration is still in progress, wait one second then
+ * poll again
+ */
+ msleep(1000);
+ count_in_sec--;
+ };
+
+ if (res.a0 == INTEL_SIP_SMC_STATUS_OK && count_in_sec)
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
+
+ p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_thread_recv_status_ok() - handle the successful status
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ * @res: result from SMC or HVC call
+ *
+ * Send back the correspond status to the service clients.
+ */
+static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
+ struct stratix10_svc_cb_data *cb_data,
+ struct arm_smccc_res res)
+{
+ cb_data->kaddr1 = NULL;
+ cb_data->kaddr2 = NULL;
+ cb_data->kaddr3 = NULL;
+
+ switch (p_data->command) {
+ case COMMAND_RECONFIG:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_REQUEST_OK);
+ break;
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_SUBMITTED);
+ break;
+ case COMMAND_NOOP:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_SUBMITTED);
+ cb_data->kaddr1 = svc_pa_to_va(res.a1);
+ break;
+ case COMMAND_RECONFIG_STATUS:
+ cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
+ break;
+ case COMMAND_RSU_UPDATE:
+ case COMMAND_RSU_NOTIFY:
+ cb_data->status = BIT(SVC_STATUS_RSU_OK);
+ break;
+ case COMMAND_RSU_RETRY:
+ cb_data->status = BIT(SVC_STATUS_RSU_OK);
+ cb_data->kaddr1 = &res.a1;
+ break;
+ default:
+ pr_warn("it shouldn't happen\n");
+ break;
+ }
+
+ pr_debug("%s: call receive_cb\n", __func__);
+ p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_normal_to_secure_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU
+ * node 0, its function stratix10_svc_secure_call_thread is used to handle
+ * SMC or HVC calls between kernel driver and secure monitor software.
+ *
+ * Return: 0 for success or -ENOMEM on error.
+ */
+static int svc_normal_to_secure_thread(void *data)
+{
+ struct stratix10_svc_controller
+ *ctrl = (struct stratix10_svc_controller *)data;
+ struct stratix10_svc_data *pdata;
+ struct stratix10_svc_cb_data *cbdata;
+ struct arm_smccc_res res;
+ unsigned long a0, a1, a2;
+ int ret_fifo = 0;
+
+ pdata = kmalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL);
+ if (!cbdata) {
+ kfree(pdata);
+ return -ENOMEM;
+ }
+
+ /* default set, to remove build warning */
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK;
+ a1 = 0;
+ a2 = 0;
+
+ pr_debug("smc_hvc_shm_thread is running\n");
+
+ while (!kthread_should_stop()) {
+ ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo,
+ pdata, sizeof(*pdata),
+ &ctrl->svc_fifo_lock);
+
+ if (!ret_fifo)
+ continue;
+
+ pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n",
+ (unsigned int)pdata->paddr, pdata->command,
+ (unsigned int)pdata->size);
+
+ switch (pdata->command) {
+ case COMMAND_RECONFIG_DATA_CLAIM:
+ svc_thread_cmd_data_claim(ctrl, pdata, cbdata);
+ continue;
+ case COMMAND_RECONFIG:
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_START;
+ pr_debug("conf_type=%u\n", (unsigned int)pdata->flag);
+ a1 = pdata->flag;
+ a2 = 0;
+ break;
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE;
+ a1 = (unsigned long)pdata->paddr;
+ a2 = (unsigned long)pdata->size;
+ break;
+ case COMMAND_RECONFIG_STATUS:
+ a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE;
+ a1 = 0;
+ a2 = 0;
+ break;
+ case COMMAND_RSU_STATUS:
+ a0 = INTEL_SIP_SMC_RSU_STATUS;
+ a1 = 0;
+ a2 = 0;
+ break;
+ case COMMAND_RSU_UPDATE:
+ a0 = INTEL_SIP_SMC_RSU_UPDATE;
+ a1 = pdata->arg[0];
+ a2 = 0;
+ break;
+ case COMMAND_RSU_NOTIFY:
+ a0 = INTEL_SIP_SMC_RSU_NOTIFY;
+ a1 = pdata->arg[0];
+ a2 = 0;
+ break;
+ case COMMAND_RSU_RETRY:
+ a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER;
+ a1 = 0;
+ a2 = 0;
+ break;
+ default:
+ pr_warn("it shouldn't happen\n");
+ break;
+ }
+ pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x",
+ __func__, (unsigned int)a0, (unsigned int)a1);
+ pr_debug(" a2=0x%016x\n", (unsigned int)a2);
+
+ ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res);
+
+ pr_debug("%s: after SMC call -- res.a0=0x%016x",
+ __func__, (unsigned int)res.a0);
+ pr_debug(" res.a1=0x%016x, res.a2=0x%016x",
+ (unsigned int)res.a1, (unsigned int)res.a2);
+ pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
+
+ if (pdata->command == COMMAND_RSU_STATUS) {
+ if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
+ cbdata->status = BIT(SVC_STATUS_RSU_ERROR);
+ else
+ cbdata->status = BIT(SVC_STATUS_RSU_OK);
+
+ cbdata->kaddr1 = &res;
+ cbdata->kaddr2 = NULL;
+ cbdata->kaddr3 = NULL;
+ pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+ continue;
+ }
+
+ switch (res.a0) {
+ case INTEL_SIP_SMC_STATUS_OK:
+ svc_thread_recv_status_ok(pdata, cbdata, res);
+ break;
+ case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
+ switch (pdata->command) {
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ svc_thread_cmd_data_claim(ctrl,
+ pdata, cbdata);
+ break;
+ case COMMAND_RECONFIG_STATUS:
+ svc_thread_cmd_config_status(ctrl,
+ pdata, cbdata);
+ break;
+ default:
+ pr_warn("it shouldn't happen\n");
+ break;
+ }
+ break;
+ case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED:
+ pr_debug("%s: STATUS_REJECTED\n", __func__);
+ break;
+ case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ case INTEL_SIP_SMC_RSU_ERROR:
+ pr_err("%s: STATUS_ERROR\n", __func__);
+ switch (pdata->command) {
+ /* for FPGA mgr */
+ case COMMAND_RECONFIG_DATA_CLAIM:
+ case COMMAND_RECONFIG:
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ case COMMAND_RECONFIG_STATUS:
+ cbdata->status =
+ BIT(SVC_STATUS_RECONFIG_ERROR);
+ break;
+
+ /* for RSU */
+ case COMMAND_RSU_STATUS:
+ case COMMAND_RSU_UPDATE:
+ case COMMAND_RSU_NOTIFY:
+ case COMMAND_RSU_RETRY:
+ cbdata->status =
+ BIT(SVC_STATUS_RSU_ERROR);
+ break;
+ }
+
+ cbdata->status = BIT(SVC_STATUS_RECONFIG_ERROR);
+ cbdata->kaddr1 = NULL;
+ cbdata->kaddr2 = NULL;
+ cbdata->kaddr3 = NULL;
+ pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+ break;
+ default:
+ pr_warn("it shouldn't happen\n");
+ break;
+ }
+ };
+
+ kfree(cbdata);
+ kfree(pdata);
+
+ return 0;
+}
+
+/**
+ * svc_normal_to_secure_shm_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU
+ * node 0, its function stratix10_svc_secure_shm_thread is used to query the
+ * physical address of memory block reserved by secure monitor software at
+ * secure world.
+ *
+ * svc_normal_to_secure_shm_thread() calls do_exit() directly since it is a
+ * standlone thread for which no one will call kthread_stop() or return when
+ * 'kthread_should_stop()' is true.
+ */
+static int svc_normal_to_secure_shm_thread(void *data)
+{
+ struct stratix10_svc_sh_memory
+ *sh_mem = (struct stratix10_svc_sh_memory *)data;
+ struct arm_smccc_res res;
+
+ /* SMC or HVC call to get shared memory info from secure world */
+ sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM,
+ 0, 0, 0, 0, 0, 0, 0, &res);
+ if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+ sh_mem->addr = res.a1;
+ sh_mem->size = res.a2;
+ } else {
+ pr_err("%s: after SMC call -- res.a0=0x%016x", __func__,
+ (unsigned int)res.a0);
+ sh_mem->addr = 0;
+ sh_mem->size = 0;
+ }
+
+ complete(&sh_mem->sync_complete);
+ do_exit(0);
+}
+
+/**
+ * svc_get_sh_memory() - get memory block reserved by secure monitor SW
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: zero for successfully getting the physical address of memory block
+ * reserved by secure monitor software, or negative value on error.
+ */
+static int svc_get_sh_memory(struct platform_device *pdev,
+ struct stratix10_svc_sh_memory *sh_memory)
+{
+ struct device *dev = &pdev->dev;
+ struct task_struct *sh_memory_task;
+ unsigned int cpu = 0;
+
+ init_completion(&sh_memory->sync_complete);
+
+ /* smc or hvc call happens on cpu 0 bound kthread */
+ sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread,
+ (void *)sh_memory,
+ cpu_to_node(cpu),
+ "svc_smc_hvc_shm_thread");
+ if (IS_ERR(sh_memory_task)) {
+ dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n");
+ return -EINVAL;
+ }
+
+ wake_up_process(sh_memory_task);
+
+ if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) {
+ dev_err(dev,
+ "timeout to get sh-memory paras from secure world\n");
+ return -ETIMEDOUT;
+ }
+
+ if (!sh_memory->addr || !sh_memory->size) {
+ dev_err(dev,
+ "failed to get shared memory info from secure world\n");
+ return -ENOMEM;
+ }
+
+ dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n",
+ (unsigned int)sh_memory->addr,
+ (unsigned int)sh_memory->size);
+
+ return 0;
+}
+
+/**
+ * svc_create_memory_pool() - create a memory pool from reserved memory block
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: pool allocated from reserved memory block or ERR_PTR() on error.
+ */
+static struct gen_pool *
+svc_create_memory_pool(struct platform_device *pdev,
+ struct stratix10_svc_sh_memory *sh_memory)
+{
+ struct device *dev = &pdev->dev;
+ struct gen_pool *genpool;
+ unsigned long vaddr;
+ phys_addr_t paddr;
+ size_t size;
+ phys_addr_t begin;
+ phys_addr_t end;
+ void *va;
+ size_t page_mask = PAGE_SIZE - 1;
+ int min_alloc_order = 3;
+ int ret;
+
+ begin = roundup(sh_memory->addr, PAGE_SIZE);
+ end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE);
+ paddr = begin;
+ size = end - begin;
+ va = memremap(paddr, size, MEMREMAP_WC);
+ if (!va) {
+ dev_err(dev, "fail to remap shared memory\n");
+ return ERR_PTR(-EINVAL);
+ }
+ vaddr = (unsigned long)va;
+ dev_dbg(dev,
+ "reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n",
+ va, (unsigned int)paddr, (unsigned int)size);
+ if ((vaddr & page_mask) || (paddr & page_mask) ||
+ (size & page_mask)) {
+ dev_err(dev, "page is not aligned\n");
+ return ERR_PTR(-EINVAL);
+ }
+ genpool = gen_pool_create(min_alloc_order, -1);
+ if (!genpool) {
+ dev_err(dev, "fail to create genpool\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
+ ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1);
+ if (ret) {
+ dev_err(dev, "fail to add memory chunk to the pool\n");
+ gen_pool_destroy(genpool);
+ return ERR_PTR(ret);
+ }
+
+ return genpool;
+}
+
+/**
+ * svc_smccc_smc() - secure monitor call between normal and secure world
+ * @a0: argument passed in registers 0
+ * @a1: argument passed in registers 1
+ * @a2: argument passed in registers 2
+ * @a3: argument passed in registers 3
+ * @a4: argument passed in registers 4
+ * @a5: argument passed in registers 5
+ * @a6: argument passed in registers 6
+ * @a7: argument passed in registers 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_smc(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3,
+ unsigned long a4, unsigned long a5,
+ unsigned long a6, unsigned long a7,
+ struct arm_smccc_res *res)
+{
+ arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * svc_smccc_hvc() - hypervisor call between normal and secure world
+ * @a0: argument passed in registers 0
+ * @a1: argument passed in registers 1
+ * @a2: argument passed in registers 2
+ * @a3: argument passed in registers 3
+ * @a4: argument passed in registers 4
+ * @a5: argument passed in registers 5
+ * @a6: argument passed in registers 6
+ * @a7: argument passed in registers 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_hvc(unsigned long a0, unsigned long a1,
+ unsigned long a2, unsigned long a3,
+ unsigned long a4, unsigned long a5,
+ unsigned long a6, unsigned long a7,
+ struct arm_smccc_res *res)
+{
+ arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * get_invoke_func() - invoke SMC or HVC call
+ * @dev: pointer to device
+ *
+ * Return: function pointer to svc_smccc_smc or svc_smccc_hvc.
+ */
+static svc_invoke_fn *get_invoke_func(struct device *dev)
+{
+ const char *method;
+
+ if (of_property_read_string(dev->of_node, "method", &method)) {
+ dev_warn(dev, "missing \"method\" property\n");
+ return ERR_PTR(-ENXIO);
+ }
+
+ if (!strcmp(method, "smc"))
+ return svc_smccc_smc;
+ if (!strcmp(method, "hvc"))
+ return svc_smccc_hvc;
+
+ dev_warn(dev, "invalid \"method\" property: %s\n", method);
+
+ return ERR_PTR(-EINVAL);
+}
+
+/**
+ * stratix10_svc_request_channel_byname() - request a service channel
+ * @client: pointer to service client
+ * @name: service client name
+ *
+ * This function is used by service client to request a service channel.
+ *
+ * Return: a pointer to channel assigned to the client on success,
+ * or ERR_PTR() on error.
+ */
+struct stratix10_svc_chan *stratix10_svc_request_channel_byname(
+ struct stratix10_svc_client *client, const char *name)
+{
+ struct device *dev = client->dev;
+ struct stratix10_svc_controller *controller;
+ struct stratix10_svc_chan *chan = NULL;
+ unsigned long flag;
+ int i;
+
+ /* if probe was called after client's, or error on probe */
+ if (list_empty(&svc_ctrl))
+ return ERR_PTR(-EPROBE_DEFER);
+
+ controller = list_first_entry(&svc_ctrl,
+ struct stratix10_svc_controller, node);
+ for (i = 0; i < SVC_NUM_CHANNEL; i++) {
+ if (!strcmp(controller->chans[i].name, name)) {
+ chan = &controller->chans[i];
+ break;
+ }
+ }
+
+ /* if there was no channel match */
+ if (i == SVC_NUM_CHANNEL) {
+ dev_err(dev, "%s: channel not allocated\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (chan->scl || !try_module_get(controller->dev->driver->owner)) {
+ dev_dbg(dev, "%s: svc not free\n", __func__);
+ return ERR_PTR(-EBUSY);
+ }
+
+ spin_lock_irqsave(&chan->lock, flag);
+ chan->scl = client;
+ chan->ctrl->num_active_client++;
+ spin_unlock_irqrestore(&chan->lock, flag);
+
+ return chan;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname);
+
+/**
+ * stratix10_svc_free_channel() - free service channel
+ * @chan: service channel to be freed
+ *
+ * This function is used by service client to free a service channel.
+ */
+void stratix10_svc_free_channel(struct stratix10_svc_chan *chan)
+{
+ unsigned long flag;
+
+ spin_lock_irqsave(&chan->lock, flag);
+ chan->scl = NULL;
+ chan->ctrl->num_active_client--;
+ module_put(chan->ctrl->dev->driver->owner);
+ spin_unlock_irqrestore(&chan->lock, flag);
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_free_channel);
+
+/**
+ * stratix10_svc_send() - send a message data to the remote
+ * @chan: service channel assigned to the client
+ * @msg: message data to be sent, in the format of
+ * "struct stratix10_svc_client_msg"
+ *
+ * This function is used by service client to add a message to the service
+ * layer driver's queue for being sent to the secure world.
+ *
+ * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
+ */
+int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg)
+{
+ struct stratix10_svc_client_msg
+ *p_msg = (struct stratix10_svc_client_msg *)msg;
+ struct stratix10_svc_data_mem *p_mem;
+ struct stratix10_svc_data *p_data;
+ int ret = 0;
+ unsigned int cpu = 0;
+
+ p_data = kzalloc(sizeof(*p_data), GFP_KERNEL);
+ if (!p_data)
+ return -ENOMEM;
+
+ /* first client will create kernel thread */
+ if (!chan->ctrl->task) {
+ chan->ctrl->task =
+ kthread_create_on_node(svc_normal_to_secure_thread,
+ (void *)chan->ctrl,
+ cpu_to_node(cpu),
+ "svc_smc_hvc_thread");
+ if (IS_ERR(chan->ctrl->task)) {
+ dev_err(chan->ctrl->dev,
+ "failed to create svc_smc_hvc_thread\n");
+ kfree(p_data);
+ return -EINVAL;
+ }
+ kthread_bind(chan->ctrl->task, cpu);
+ wake_up_process(chan->ctrl->task);
+ }
+
+ pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__,
+ p_msg->payload, p_msg->command,
+ (unsigned int)p_msg->payload_length);
+
+ if (list_empty(&svc_data_mem)) {
+ if (p_msg->command == COMMAND_RECONFIG) {
+ struct stratix10_svc_command_config_type *ct =
+ (struct stratix10_svc_command_config_type *)
+ p_msg->payload;
+ p_data->flag = ct->flags;
+ }
+ } else {
+ list_for_each_entry(p_mem, &svc_data_mem, node)
+ if (p_mem->vaddr == p_msg->payload) {
+ p_data->paddr = p_mem->paddr;
+ break;
+ }
+ }
+
+ p_data->command = p_msg->command;
+ p_data->arg[0] = p_msg->arg[0];
+ p_data->arg[1] = p_msg->arg[1];
+ p_data->arg[2] = p_msg->arg[2];
+ p_data->size = p_msg->payload_length;
+ p_data->chan = chan;
+ pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__,
+ (unsigned int)p_data->paddr, p_data->command,
+ (unsigned int)p_data->size);
+ ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data,
+ sizeof(*p_data),
+ &chan->ctrl->svc_fifo_lock);
+
+ kfree(p_data);
+
+ if (!ret)
+ return -ENOBUFS;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_send);
+
+/**
+ * stratix10_svc_done() - complete service request transactions
+ * @chan: service channel assigned to the client
+ *
+ * This function should be called when client has finished its request
+ * or there is an error in the request process. It allows the service layer
+ * to stop the running thread to have maximize savings in kernel resources.
+ */
+void stratix10_svc_done(struct stratix10_svc_chan *chan)
+{
+ /* stop thread when thread is running AND only one active client */
+ if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) {
+ pr_debug("svc_smc_hvc_shm_thread is stopped\n");
+ kthread_stop(chan->ctrl->task);
+ chan->ctrl->task = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_done);
+
+/**
+ * stratix10_svc_allocate_memory() - allocate memory
+ * @chan: service channel assigned to the client
+ * @size: memory size requested by a specific service client
+ *
+ * Service layer allocates the requested number of bytes buffer from the
+ * memory pool, service client uses this function to get allocated buffers.
+ *
+ * Return: address of allocated memory on success, or ERR_PTR() on error.
+ */
+void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan,
+ size_t size)
+{
+ struct stratix10_svc_data_mem *pmem;
+ unsigned long va;
+ phys_addr_t pa;
+ struct gen_pool *genpool = chan->ctrl->genpool;
+ size_t s = roundup(size, 1 << genpool->min_alloc_order);
+
+ pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL);
+ if (!pmem)
+ return ERR_PTR(-ENOMEM);
+
+ va = gen_pool_alloc(genpool, s);
+ if (!va)
+ return ERR_PTR(-ENOMEM);
+
+ memset((void *)va, 0, s);
+ pa = gen_pool_virt_to_phys(genpool, va);
+
+ pmem->vaddr = (void *)va;
+ pmem->paddr = pa;
+ pmem->size = s;
+ list_add_tail(&pmem->node, &svc_data_mem);
+ pr_debug("%s: va=%p, pa=0x%016x\n", __func__,
+ pmem->vaddr, (unsigned int)pmem->paddr);
+
+ return (void *)va;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory);
+
+/**
+ * stratix10_svc_free_memory() - free allocated memory
+ * @chan: service channel assigned to the client
+ * @kaddr: memory to be freed
+ *
+ * This function is used by service client to free allocated buffers.
+ */
+void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr)
+{
+ struct stratix10_svc_data_mem *pmem;
+ size_t size = 0;
+
+ list_for_each_entry(pmem, &svc_data_mem, node)
+ if (pmem->vaddr == kaddr) {
+ size = pmem->size;
+ break;
+ }
+
+ gen_pool_free(chan->ctrl->genpool, (unsigned long)kaddr, size);
+ pmem->vaddr = NULL;
+ list_del(&pmem->node);
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
+
+static const struct of_device_id stratix10_svc_drv_match[] = {
+ {.compatible = "intel,stratix10-svc"},
+ {},
+};
+
+static int stratix10_svc_drv_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stratix10_svc_controller *controller;
+ struct stratix10_svc_chan *chans;
+ struct gen_pool *genpool;
+ struct stratix10_svc_sh_memory *sh_memory;
+ struct stratix10_svc *svc;
+
+ svc_invoke_fn *invoke_fn;
+ size_t fifo_size;
+ int ret;
+
+ /* get SMC or HVC function */
+ invoke_fn = get_invoke_func(dev);
+ if (IS_ERR(invoke_fn))
+ return -EINVAL;
+
+ sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL);
+ if (!sh_memory)
+ return -ENOMEM;
+
+ sh_memory->invoke_fn = invoke_fn;
+ ret = svc_get_sh_memory(pdev, sh_memory);
+ if (ret)
+ return ret;
+
+ genpool = svc_create_memory_pool(pdev, sh_memory);
+ if (!genpool)
+ return -ENOMEM;
+
+ /* allocate service controller and supporting channel */
+ controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
+ if (!controller)
+ return -ENOMEM;
+
+ chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
+ sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
+ if (!chans)
+ return -ENOMEM;
+
+ controller->dev = dev;
+ controller->num_chans = SVC_NUM_CHANNEL;
+ controller->num_active_client = 0;
+ controller->chans = chans;
+ controller->genpool = genpool;
+ controller->task = NULL;
+ controller->invoke_fn = invoke_fn;
+ init_completion(&controller->complete_status);
+
+ fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO;
+ ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
+ if (ret) {
+ dev_err(dev, "failed to allocate FIFO\n");
+ return ret;
+ }
+ spin_lock_init(&controller->svc_fifo_lock);
+
+ chans[0].scl = NULL;
+ chans[0].ctrl = controller;
+ chans[0].name = SVC_CLIENT_FPGA;
+ spin_lock_init(&chans[0].lock);
+
+ chans[1].scl = NULL;
+ chans[1].ctrl = controller;
+ chans[1].name = SVC_CLIENT_RSU;
+ spin_lock_init(&chans[1].lock);
+
+ list_add_tail(&controller->node, &svc_ctrl);
+ platform_set_drvdata(pdev, controller);
+
+ /* add svc client device(s) */
+ svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
+ if (!svc)
+ return -ENOMEM;
+
+ svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
+ if (!svc->stratix10_svc_rsu) {
+ dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
+ return -ENOMEM;
+ }
+
+ ret = platform_device_add(svc->stratix10_svc_rsu);
+ if (ret) {
+ platform_device_put(svc->stratix10_svc_rsu);
+ return ret;
+ }
+ dev_set_drvdata(dev, svc);
+
+ pr_info("Intel Service Layer Driver Initialized\n");
+
+ return ret;
+}
+
+static int stratix10_svc_drv_remove(struct platform_device *pdev)
+{
+ struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev);
+ struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev);
+
+ platform_device_unregister(svc->stratix10_svc_rsu);
+
+ kfifo_free(&ctrl->svc_fifo);
+ if (ctrl->task) {
+ kthread_stop(ctrl->task);
+ ctrl->task = NULL;
+ }
+ if (ctrl->genpool)
+ gen_pool_destroy(ctrl->genpool);
+ list_del(&ctrl->node);
+
+ return 0;
+}
+
+static struct platform_driver stratix10_svc_driver = {
+ .probe = stratix10_svc_drv_probe,
+ .remove = stratix10_svc_drv_remove,
+ .driver = {
+ .name = "stratix10-svc",
+ .of_match_table = stratix10_svc_drv_match,
+ },
+};
+
+static int __init stratix10_svc_init(void)
+{
+ struct device_node *fw_np;
+ struct device_node *np;
+ int ret;
+
+ fw_np = of_find_node_by_name(NULL, "firmware");
+ if (!fw_np)
+ return -ENODEV;
+
+ np = of_find_matching_node(fw_np, stratix10_svc_drv_match);
+ if (!np)
+ return -ENODEV;
+
+ of_node_put(np);
+ ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&stratix10_svc_driver);
+}
+
+static void __exit stratix10_svc_exit(void)
+{
+ return platform_driver_unregister(&stratix10_svc_driver);
+}
+
+subsys_initcall(stratix10_svc_init);
+module_exit(stratix10_svc_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver");
+MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
+MODULE_ALIAS("platform:stratix10-svc");