Update Linux to v5.4.2

Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/crypto/ccree/cc_pm.c b/drivers/crypto/ccree/cc_pm.c
index d990f47..dbc508f 100644
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2012-2018 ARM Limited or its affiliates. */
+/* Copyright (C) 2012-2019 ARM Limited (or its affiliates). */
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
@@ -8,9 +8,9 @@
 #include "cc_buffer_mgr.h"
 #include "cc_request_mgr.h"
 #include "cc_sram_mgr.h"
-#include "cc_ivgen.h"
 #include "cc_hash.h"
 #include "cc_pm.h"
+#include "cc_fips.h"
 
 #define POWER_DOWN_ENABLE 0x01
 #define POWER_DOWN_DISABLE 0x00
@@ -25,13 +25,13 @@
 	int rc;
 
 	dev_dbg(dev, "set HOST_POWER_DOWN_EN\n");
-	cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_ENABLE);
 	rc = cc_suspend_req_queue(drvdata);
 	if (rc) {
 		dev_err(dev, "cc_suspend_req_queue (%x)\n", rc);
 		return rc;
 	}
 	fini_cc_regs(drvdata);
+	cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_ENABLE);
 	cc_clk_off(drvdata);
 	return 0;
 }
@@ -42,19 +42,26 @@
 	struct cc_drvdata *drvdata = dev_get_drvdata(dev);
 
 	dev_dbg(dev, "unset HOST_POWER_DOWN_EN\n");
-	cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_DISABLE);
-
+	/* Enables the device source clk */
 	rc = cc_clk_on(drvdata);
 	if (rc) {
 		dev_err(dev, "failed getting clock back on. We're toast.\n");
 		return rc;
 	}
+	/* wait for Crytpcell reset completion */
+	if (!cc_wait_for_reset_completion(drvdata)) {
+		dev_err(dev, "Cryptocell reset not completed");
+		return -EBUSY;
+	}
 
+	cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_DISABLE);
 	rc = init_cc_regs(drvdata, false);
 	if (rc) {
 		dev_err(dev, "init_cc_regs (%x)\n", rc);
 		return rc;
 	}
+	/* check if tee fips error occurred during power down */
+	cc_tee_handle_fips_error(drvdata);
 
 	rc = cc_resume_req_queue(drvdata);
 	if (rc) {
@@ -65,7 +72,6 @@
 	/* must be after the queue resuming as it uses the HW queue*/
 	cc_init_hash_sram(drvdata);
 
-	cc_init_iv_sram(drvdata);
 	return 0;
 }
 
@@ -98,22 +104,27 @@
 	return rc;
 }
 
+bool cc_pm_is_dev_suspended(struct device *dev)
+{
+	/* check device state using runtime api */
+	return pm_runtime_suspended(dev);
+}
+
 int cc_pm_init(struct cc_drvdata *drvdata)
 {
-	int rc = 0;
 	struct device *dev = drvdata_to_dev(drvdata);
 
 	/* must be before the enabling to avoid resdundent suspending */
 	pm_runtime_set_autosuspend_delay(dev, CC_SUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(dev);
 	/* activate the PM module */
-	rc = pm_runtime_set_active(dev);
-	if (rc)
-		return rc;
-	/* enable the PM module*/
-	pm_runtime_enable(dev);
+	return pm_runtime_set_active(dev);
+}
 
-	return rc;
+/* enable the PM module*/
+void cc_pm_go(struct cc_drvdata *drvdata)
+{
+	pm_runtime_enable(drvdata_to_dev(drvdata));
 }
 
 void cc_pm_fini(struct cc_drvdata *drvdata)