Update Linux to v5.4.2

Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index 6ad5ef4..0fd6f97 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -4,7 +4,7 @@
 # subsystems should select the appropriate symbols.
 
 config REGMAP
-	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
+	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SCCB || REGMAP_I3C)
 	select IRQ_DOMAIN if REGMAP_IRQ
 	bool
 
@@ -44,8 +44,12 @@
 
 config REGMAP_SOUNDWIRE
 	tristate
-	depends on SOUNDWIRE_BUS
+	depends on SOUNDWIRE
 
 config REGMAP_SCCB
 	tristate
 	depends on I2C
+
+config REGMAP_I3C
+	tristate
+	depends on I3C
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index f5b4e88..ff6c7d8 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -16,3 +16,4 @@
 obj-$(CONFIG_REGMAP_W1) += regmap-w1.o
 obj-$(CONFIG_REGMAP_SOUNDWIRE) += regmap-sdw.o
 obj-$(CONFIG_REGMAP_SCCB) += regmap-sccb.o
+obj-$(CONFIG_REGMAP_I3C) += regmap-i3c.o
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index a6bf34d..3d80c4b 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Register map access API internal header
  *
  * Copyright 2011 Wolfson Microelectronics plc
  *
  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef _REGMAP_INTERNAL_H
@@ -94,11 +91,13 @@
 	bool (*readable_reg)(struct device *dev, unsigned int reg);
 	bool (*volatile_reg)(struct device *dev, unsigned int reg);
 	bool (*precious_reg)(struct device *dev, unsigned int reg);
+	bool (*writeable_noinc_reg)(struct device *dev, unsigned int reg);
 	bool (*readable_noinc_reg)(struct device *dev, unsigned int reg);
 	const struct regmap_access_table *wr_table;
 	const struct regmap_access_table *rd_table;
 	const struct regmap_access_table *volatile_table;
 	const struct regmap_access_table *precious_table;
+	const struct regmap_access_table *wr_noinc_table;
 	const struct regmap_access_table *rd_noinc_table;
 
 	int (*reg_read)(void *context, unsigned int reg, unsigned int *val);
@@ -149,7 +148,7 @@
 
 	/* if set, converts bulk read to single read */
 	bool use_single_read;
-	/* if set, converts bulk read to single read */
+	/* if set, converts bulk write to single write */
 	bool use_single_write;
 	/* if set, the device supports multi write mode */
 	bool can_multi_write;
@@ -183,6 +182,7 @@
 bool regmap_readable(struct regmap *map, unsigned int reg);
 bool regmap_volatile(struct regmap *map, unsigned int reg);
 bool regmap_precious(struct regmap *map, unsigned int reg);
+bool regmap_writeable_noinc(struct regmap *map, unsigned int reg);
 bool regmap_readable_noinc(struct regmap *map, unsigned int reg);
 
 int _regmap_write(struct regmap *map, unsigned int reg,
diff --git a/drivers/base/regmap/regcache-flat.c b/drivers/base/regmap/regcache-flat.c
index bc6cd88..b7e4b24 100644
--- a/drivers/base/regmap/regcache-flat.c
+++ b/drivers/base/regmap/regcache-flat.c
@@ -1,14 +1,10 @@
-/*
- * Register cache access API - flat caching support
- *
- * Copyright 2012 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register cache access API - flat caching support
+//
+// Copyright 2012 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
 #include <linux/device.h>
 #include <linux/seq_file.h>
diff --git a/drivers/base/regmap/regcache-lzo.c b/drivers/base/regmap/regcache-lzo.c
index 4ff3113..7886303 100644
--- a/drivers/base/regmap/regcache-lzo.c
+++ b/drivers/base/regmap/regcache-lzo.c
@@ -1,14 +1,10 @@
-/*
- * Register cache access API - LZO caching support
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register cache access API - LZO caching support
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
 
 #include <linux/device.h>
 #include <linux/lzo.h>
@@ -152,20 +148,18 @@
 	 * that register.
 	 */
 	bmp_size = map->num_reg_defaults_raw;
-	sync_bmp = kmalloc_array(BITS_TO_LONGS(bmp_size), sizeof(long),
-				 GFP_KERNEL);
+	sync_bmp = bitmap_zalloc(bmp_size, GFP_KERNEL);
 	if (!sync_bmp) {
 		ret = -ENOMEM;
 		goto err;
 	}
-	bitmap_zero(sync_bmp, bmp_size);
 
 	/* allocate the lzo blocks and initialize them */
 	for (i = 0; i < blkcount; i++) {
 		lzo_blocks[i] = kzalloc(sizeof **lzo_blocks,
 					GFP_KERNEL);
 		if (!lzo_blocks[i]) {
-			kfree(sync_bmp);
+			bitmap_free(sync_bmp);
 			ret = -ENOMEM;
 			goto err;
 		}
@@ -217,7 +211,7 @@
 	 * only once.
 	 */
 	if (lzo_blocks[0])
-		kfree(lzo_blocks[0]->sync_bmp);
+		bitmap_free(lzo_blocks[0]->sync_bmp);
 	for (i = 0; i < blkcount; i++) {
 		if (lzo_blocks[i]) {
 			kfree(lzo_blocks[i]->wmem);
diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c
index b1e9aae..cfa29dc 100644
--- a/drivers/base/regmap/regcache-rbtree.c
+++ b/drivers/base/regmap/regcache-rbtree.c
@@ -1,14 +1,10 @@
-/*
- * Register cache access API - rbtree caching support
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register cache access API - rbtree caching support
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
 
 #include <linux/debugfs.h>
 #include <linux/device.h>
@@ -33,7 +29,7 @@
 	unsigned int blklen;
 	/* the actual rbtree node holding this block */
 	struct rb_node node;
-} __attribute__ ((packed));
+};
 
 struct regcache_rbtree_ctx {
 	struct rb_root root;
@@ -177,17 +173,7 @@
 	return 0;
 }
 
-static int rbtree_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, rbtree_show, inode->i_private);
-}
-
-static const struct file_operations rbtree_fops = {
-	.open		= rbtree_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(rbtree);
 
 static void rbtree_debugfs_init(struct regmap *map)
 {
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index 7735603..a93cafd 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -1,14 +1,10 @@
-/*
- * Register cache access API
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register cache access API
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
 
 #include <linux/bsearch.h>
 #include <linux/device.h>
diff --git a/drivers/base/regmap/regmap-ac97.c b/drivers/base/regmap/regmap-ac97.c
index c03ebfd..b9f76bd 100644
--- a/drivers/base/regmap/regmap-ac97.c
+++ b/drivers/base/regmap/regmap-ac97.c
@@ -1,20 +1,8 @@
-/*
- * Register map access API - AC'97 support
- *
- * Copyright 2013 Linaro Ltd.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - AC'97 support
+//
+// Copyright 2013 Linaro Ltd.  All rights reserved.
 
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index 87b562e..e72843f 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -1,14 +1,10 @@
-/*
- * Register map access API - debugfs
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - debugfs
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
 #include <linux/slab.h>
 #include <linux/mutex.h>
@@ -195,6 +191,28 @@
 	}
 }
 
+static int regmap_next_readable_reg(struct regmap *map, int reg)
+{
+	struct regmap_debugfs_off_cache *c;
+	int ret = -EINVAL;
+
+	if (regmap_printable(map, reg + map->reg_stride)) {
+		ret = reg + map->reg_stride;
+	} else {
+		mutex_lock(&map->cache_lock);
+		list_for_each_entry(c, &map->debugfs_off_cache, list) {
+			if (reg > c->max_reg)
+				continue;
+			if (reg < c->base_reg) {
+				ret = c->base_reg;
+				break;
+			}
+		}
+		mutex_unlock(&map->cache_lock);
+	}
+	return ret;
+}
+
 static ssize_t regmap_read_debugfs(struct regmap *map, unsigned int from,
 				   unsigned int to, char __user *user_buf,
 				   size_t count, loff_t *ppos)
@@ -218,12 +236,8 @@
 	/* Work out which register we're starting at */
 	start_reg = regmap_debugfs_get_dump_start(map, from, *ppos, &p);
 
-	for (i = start_reg; i <= to; i += map->reg_stride) {
-		if (!regmap_readable(map, i) && !regmap_cached(map, i))
-			continue;
-
-		if (regmap_precious(map, i))
-			continue;
+	for (i = start_reg; i >= 0 && i <= to;
+	     i = regmap_next_readable_reg(map, i)) {
 
 		/* If we're in the region the user is trying to read */
 		if (p >= *ppos) {
@@ -435,17 +449,7 @@
 	return 0;
 }
 
-static int access_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, regmap_access_show, inode->i_private);
-}
-
-static const struct file_operations regmap_access_fops = {
-	.open		= access_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(regmap_access);
 
 static ssize_t regmap_cache_only_write_file(struct file *file,
 					    const char __user *user_buf,
@@ -575,6 +579,8 @@
 	}
 
 	if (!strcmp(name, "dummy")) {
+		kfree(map->debugfs_name);
+
 		map->debugfs_name = kasprintf(GFP_KERNEL, "dummy%d",
 						dummy_index);
 		name = map->debugfs_name;
@@ -582,14 +588,6 @@
 	}
 
 	map->debugfs = debugfs_create_dir(name, regmap_debugfs_root);
-	if (!map->debugfs) {
-		dev_warn(map->dev,
-			 "Failed to create %s debugfs directory\n", name);
-
-		kfree(map->debugfs_name);
-		map->debugfs_name = NULL;
-		return;
-	}
 
 	debugfs_create_file("name", 0400, map->debugfs,
 			    map, &regmap_name_fops);
@@ -666,10 +664,6 @@
 	struct regmap_debugfs_node *node, *tmp;
 
 	regmap_debugfs_root = debugfs_create_dir("regmap", NULL);
-	if (!regmap_debugfs_root) {
-		pr_warn("regmap: Failed to create debugfs root\n");
-		return;
-	}
 
 	mutex_lock(&regmap_debugfs_early_lock);
 	list_for_each_entry_safe(node, tmp, &regmap_debugfs_early_list, link) {
diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
index 056acde..ac9b31c 100644
--- a/drivers/base/regmap/regmap-i2c.c
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -1,14 +1,10 @@
-/*
- * Register map access API - I2C support
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - I2C support
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
 #include <linux/regmap.h>
 #include <linux/i2c.h>
diff --git a/drivers/base/regmap/regmap-i3c.c b/drivers/base/regmap/regmap-i3c.c
new file mode 100644
index 0000000..1578fb5
--- /dev/null
+++ b/drivers/base/regmap/regmap-i3c.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+
+#include <linux/regmap.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/module.h>
+
+static int regmap_i3c_write(void *context, const void *data, size_t count)
+{
+	struct device *dev = context;
+	struct i3c_device *i3c = dev_to_i3cdev(dev);
+	struct i3c_priv_xfer xfers[] = {
+		{
+			.rnw = false,
+			.len = count,
+			.data.out = data,
+		},
+	};
+
+	return i3c_device_do_priv_xfers(i3c, xfers, 1);
+}
+
+static int regmap_i3c_read(void *context,
+			   const void *reg, size_t reg_size,
+			   void *val, size_t val_size)
+{
+	struct device *dev = context;
+	struct i3c_device *i3c = dev_to_i3cdev(dev);
+	struct i3c_priv_xfer xfers[2];
+
+	xfers[0].rnw = false;
+	xfers[0].len = reg_size;
+	xfers[0].data.out = reg;
+
+	xfers[1].rnw = true;
+	xfers[1].len = val_size;
+	xfers[1].data.in = val;
+
+	return i3c_device_do_priv_xfers(i3c, xfers, 2);
+}
+
+static struct regmap_bus regmap_i3c = {
+	.write = regmap_i3c_write,
+	.read = regmap_i3c_read,
+};
+
+struct regmap *__devm_regmap_init_i3c(struct i3c_device *i3c,
+				      const struct regmap_config *config,
+				      struct lock_class_key *lock_key,
+				      const char *lock_name)
+{
+	return __devm_regmap_init(&i3c->dev, &regmap_i3c, &i3c->dev, config,
+				  lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_i3c);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("Regmap I3C Module");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 429ca8e..3d64c93 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -1,14 +1,10 @@
-/*
- * regmap based irq_chip
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// regmap based irq_chip
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
 #include <linux/device.h>
 #include <linux/export.h>
@@ -35,6 +31,7 @@
 	int wake_count;
 
 	void *status_reg_buf;
+	unsigned int *main_status_buf;
 	unsigned int *status_buf;
 	unsigned int *mask_buf;
 	unsigned int *mask_buf_def;
@@ -44,6 +41,8 @@
 
 	unsigned int irq_reg_stride;
 	unsigned int type_reg_stride;
+
+	bool clear_status:1;
 };
 
 static inline const
@@ -77,6 +76,7 @@
 	int i, ret;
 	u32 reg;
 	u32 unmask_offset;
+	u32 val;
 
 	if (d->chip->runtime_pm) {
 		ret = pm_runtime_get_sync(map->dev);
@@ -85,12 +85,29 @@
 				ret);
 	}
 
+	if (d->clear_status) {
+		for (i = 0; i < d->chip->num_regs; i++) {
+			reg = d->chip->status_base +
+				(i * map->reg_stride * d->irq_reg_stride);
+
+			ret = regmap_read(map, reg, &val);
+			if (ret)
+				dev_err(d->map->dev,
+					"Failed to clear the interrupt status bits\n");
+		}
+
+		d->clear_status = false;
+	}
+
 	/*
 	 * If there's been a change in the mask write it back to the
 	 * hardware.  We rely on the use of the regmap core cache to
 	 * suppress pointless writes.
 	 */
 	for (i = 0; i < d->chip->num_regs; i++) {
+		if (!d->chip->mask_base)
+			continue;
+
 		reg = d->chip->mask_base +
 			(i * map->reg_stride * d->irq_reg_stride);
 		if (d->chip->mask_invert) {
@@ -157,20 +174,23 @@
 		}
 	}
 
-	for (i = 0; i < d->chip->num_type_reg; i++) {
-		if (!d->type_buf_def[i])
-			continue;
-		reg = d->chip->type_base +
-			(i * map->reg_stride * d->type_reg_stride);
-		if (d->chip->type_invert)
-			ret = regmap_irq_update_bits(d, reg,
-				d->type_buf_def[i], ~d->type_buf[i]);
-		else
-			ret = regmap_irq_update_bits(d, reg,
-				d->type_buf_def[i], d->type_buf[i]);
-		if (ret != 0)
-			dev_err(d->map->dev, "Failed to sync type in %x\n",
-				reg);
+	/* Don't update the type bits if we're using mask bits for irq type. */
+	if (!d->chip->type_in_mask) {
+		for (i = 0; i < d->chip->num_type_reg; i++) {
+			if (!d->type_buf_def[i])
+				continue;
+			reg = d->chip->type_base +
+				(i * map->reg_stride * d->type_reg_stride);
+			if (d->chip->type_invert)
+				ret = regmap_irq_update_bits(d, reg,
+					d->type_buf_def[i], ~d->type_buf[i]);
+			else
+				ret = regmap_irq_update_bits(d, reg,
+					d->type_buf_def[i], d->type_buf[i]);
+			if (ret != 0)
+				dev_err(d->map->dev, "Failed to sync type in %x\n",
+					reg);
+		}
 	}
 
 	if (d->chip->runtime_pm)
@@ -194,8 +214,30 @@
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
 	struct regmap *map = d->map;
 	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
+	unsigned int mask, type;
 
-	d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~irq_data->mask;
+	type = irq_data->type.type_falling_val | irq_data->type.type_rising_val;
+
+	/*
+	 * The type_in_mask flag means that the underlying hardware uses
+	 * separate mask bits for rising and falling edge interrupts, but
+	 * we want to make them into a single virtual interrupt with
+	 * configurable edge.
+	 *
+	 * If the interrupt we're enabling defines the falling or rising
+	 * masks then instead of using the regular mask bits for this
+	 * interrupt, use the value previously written to the type buffer
+	 * at the corresponding offset in regmap_irq_set_type().
+	 */
+	if (d->chip->type_in_mask && type)
+		mask = d->type_buf[irq_data->reg_offset / map->reg_stride];
+	else
+		mask = irq_data->mask;
+
+	if (d->chip->clear_on_unmask)
+		d->clear_status = true;
+
+	d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~mask;
 }
 
 static void regmap_irq_disable(struct irq_data *data)
@@ -212,27 +254,42 @@
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
 	struct regmap *map = d->map;
 	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
-	int reg = irq_data->type_reg_offset / map->reg_stride;
+	int reg;
+	const struct regmap_irq_type *t = &irq_data->type;
 
-	if (!(irq_data->type_rising_mask | irq_data->type_falling_mask))
+	if ((t->types_supported & type) != type)
 		return 0;
 
-	d->type_buf[reg] &= ~(irq_data->type_falling_mask |
-					irq_data->type_rising_mask);
+	reg = t->type_reg_offset / map->reg_stride;
+
+	if (t->type_reg_mask)
+		d->type_buf[reg] &= ~t->type_reg_mask;
+	else
+		d->type_buf[reg] &= ~(t->type_falling_val |
+				      t->type_rising_val |
+				      t->type_level_low_val |
+				      t->type_level_high_val);
 	switch (type) {
 	case IRQ_TYPE_EDGE_FALLING:
-		d->type_buf[reg] |= irq_data->type_falling_mask;
+		d->type_buf[reg] |= t->type_falling_val;
 		break;
 
 	case IRQ_TYPE_EDGE_RISING:
-		d->type_buf[reg] |= irq_data->type_rising_mask;
+		d->type_buf[reg] |= t->type_rising_val;
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
-		d->type_buf[reg] |= (irq_data->type_falling_mask |
-					irq_data->type_rising_mask);
+		d->type_buf[reg] |= (t->type_falling_val |
+					t->type_rising_val);
 		break;
 
+	case IRQ_TYPE_LEVEL_HIGH:
+		d->type_buf[reg] |= t->type_level_high_val;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		d->type_buf[reg] |= t->type_level_low_val;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -269,6 +326,33 @@
 	.irq_set_wake		= regmap_irq_set_wake,
 };
 
+static inline int read_sub_irq_data(struct regmap_irq_chip_data *data,
+					   unsigned int b)
+{
+	const struct regmap_irq_chip *chip = data->chip;
+	struct regmap *map = data->map;
+	struct regmap_irq_sub_irq_map *subreg;
+	int i, ret = 0;
+
+	if (!chip->sub_reg_offsets) {
+		/* Assume linear mapping */
+		ret = regmap_read(map, chip->status_base +
+				  (b * map->reg_stride * data->irq_reg_stride),
+				   &data->status_buf[b]);
+	} else {
+		subreg = &chip->sub_reg_offsets[b];
+		for (i = 0; i < subreg->num_regs; i++) {
+			unsigned int offset = subreg->offset[i];
+
+			ret = regmap_read(map, chip->status_base + offset,
+					  &data->status_buf[offset]);
+			if (ret)
+				break;
+		}
+	}
+	return ret;
+}
+
 static irqreturn_t regmap_irq_thread(int irq, void *d)
 {
 	struct regmap_irq_chip_data *data = d;
@@ -286,17 +370,68 @@
 		if (ret < 0) {
 			dev_err(map->dev, "IRQ thread failed to resume: %d\n",
 				ret);
-			pm_runtime_put(map->dev);
 			goto exit;
 		}
 	}
 
 	/*
-	 * Read in the statuses, using a single bulk read if possible
-	 * in order to reduce the I/O overheads.
+	 * Read only registers with active IRQs if the chip has 'main status
+	 * register'. Else read in the statuses, using a single bulk read if
+	 * possible in order to reduce the I/O overheads.
 	 */
-	if (!map->use_single_read && map->reg_stride == 1 &&
-	    data->irq_reg_stride == 1) {
+
+	if (chip->num_main_regs) {
+		unsigned int max_main_bits;
+		unsigned long size;
+
+		size = chip->num_regs * sizeof(unsigned int);
+
+		max_main_bits = (chip->num_main_status_bits) ?
+				 chip->num_main_status_bits : chip->num_regs;
+		/* Clear the status buf as we don't read all status regs */
+		memset(data->status_buf, 0, size);
+
+		/* We could support bulk read for main status registers
+		 * but I don't expect to see devices with really many main
+		 * status registers so let's only support single reads for the
+		 * sake of simplicity. and add bulk reads only if needed
+		 */
+		for (i = 0; i < chip->num_main_regs; i++) {
+			ret = regmap_read(map, chip->main_status +
+				  (i * map->reg_stride
+				   * data->irq_reg_stride),
+				  &data->main_status_buf[i]);
+			if (ret) {
+				dev_err(map->dev,
+					"Failed to read IRQ status %d\n",
+					ret);
+				goto exit;
+			}
+		}
+
+		/* Read sub registers with active IRQs */
+		for (i = 0; i < chip->num_main_regs; i++) {
+			unsigned int b;
+			const unsigned long mreg = data->main_status_buf[i];
+
+			for_each_set_bit(b, &mreg, map->format.val_bytes * 8) {
+				if (i * map->format.val_bytes * 8 + b >
+				    max_main_bits)
+					break;
+				ret = read_sub_irq_data(data, b);
+
+				if (ret != 0) {
+					dev_err(map->dev,
+						"Failed to read IRQ status %d\n",
+						ret);
+					goto exit;
+				}
+			}
+
+		}
+	} else if (!map->use_single_read && map->reg_stride == 1 &&
+		   data->irq_reg_stride == 1) {
+
 		u8 *buf8 = data->status_reg_buf;
 		u16 *buf16 = data->status_reg_buf;
 		u32 *buf32 = data->status_reg_buf;
@@ -340,8 +475,6 @@
 				dev_err(map->dev,
 					"Failed to read IRQ status: %d\n",
 					ret);
-				if (chip->runtime_pm)
-					pm_runtime_put(map->dev);
 				goto exit;
 			}
 		}
@@ -375,10 +508,10 @@
 		}
 	}
 
+exit:
 	if (chip->runtime_pm)
 		pm_runtime_put(map->dev);
 
-exit:
 	if (chip->handle_post_irq)
 		chip->handle_post_irq(chip->irq_drv_data);
 
@@ -430,12 +563,16 @@
 	struct regmap_irq_chip_data *d;
 	int i;
 	int ret = -ENOMEM;
+	int num_type_reg;
 	u32 reg;
 	u32 unmask_offset;
 
 	if (chip->num_regs <= 0)
 		return -EINVAL;
 
+	if (chip->clear_on_unmask && (chip->ack_base || chip->use_ack))
+		return -EINVAL;
+
 	for (i = 0; i < chip->num_irqs; i++) {
 		if (chip->irqs[i].reg_offset % map->reg_stride)
 			return -EINVAL;
@@ -457,6 +594,15 @@
 	if (!d)
 		return -ENOMEM;
 
+	if (chip->num_main_regs) {
+		d->main_status_buf = kcalloc(chip->num_main_regs,
+					     sizeof(unsigned int),
+					     GFP_KERNEL);
+
+		if (!d->main_status_buf)
+			goto err_alloc;
+	}
+
 	d->status_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
 				GFP_KERNEL);
 	if (!d->status_buf)
@@ -479,13 +625,14 @@
 			goto err_alloc;
 	}
 
-	if (chip->num_type_reg) {
-		d->type_buf_def = kcalloc(chip->num_type_reg,
-					sizeof(unsigned int), GFP_KERNEL);
+	num_type_reg = chip->type_in_mask ? chip->num_regs : chip->num_type_reg;
+	if (num_type_reg) {
+		d->type_buf_def = kcalloc(num_type_reg,
+					  sizeof(unsigned int), GFP_KERNEL);
 		if (!d->type_buf_def)
 			goto err_alloc;
 
-		d->type_buf = kcalloc(chip->num_type_reg, sizeof(unsigned int),
+		d->type_buf = kcalloc(num_type_reg, sizeof(unsigned int),
 				      GFP_KERNEL);
 		if (!d->type_buf)
 			goto err_alloc;
@@ -526,6 +673,9 @@
 	/* Mask all the interrupts by default */
 	for (i = 0; i < chip->num_regs; i++) {
 		d->mask_buf[i] = d->mask_buf_def[i];
+		if (!chip->mask_base)
+			continue;
+
 		reg = chip->mask_base +
 			(i * map->reg_stride * d->irq_reg_stride);
 		if (chip->mask_invert)
@@ -600,27 +750,18 @@
 		}
 	}
 
-	if (chip->num_type_reg) {
-		for (i = 0; i < chip->num_irqs; i++) {
-			reg = chip->irqs[i].type_reg_offset / map->reg_stride;
-			d->type_buf_def[reg] |= chip->irqs[i].type_rising_mask |
-					chip->irqs[i].type_falling_mask;
-		}
+	if (chip->num_type_reg && !chip->type_in_mask) {
 		for (i = 0; i < chip->num_type_reg; ++i) {
-			if (!d->type_buf_def[i])
-				continue;
-
 			reg = chip->type_base +
 				(i * map->reg_stride * d->type_reg_stride);
-			if (chip->type_invert)
-				ret = regmap_irq_update_bits(d, reg,
-					d->type_buf_def[i], 0xFF);
-			else
-				ret = regmap_irq_update_bits(d, reg,
-					d->type_buf_def[i], 0x0);
-			if (ret != 0) {
-				dev_err(map->dev,
-					"Failed to set type in 0x%x: %x\n",
+
+			ret = regmap_read(map, reg, &d->type_buf_def[i]);
+
+			if (d->chip->type_invert)
+				d->type_buf_def[i] = ~d->type_buf_def[i];
+
+			if (ret) {
+				dev_err(map->dev, "Failed to get type defaults at 0x%x: %d\n",
 					reg, ret);
 				goto err_alloc;
 			}
diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c
index 8741fb5..af967d8 100644
--- a/drivers/base/regmap/regmap-mmio.c
+++ b/drivers/base/regmap/regmap-mmio.c
@@ -1,20 +1,8 @@
-/*
- * Register map access API - MMIO support
- *
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - MMIO support
+//
+// Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
 
 #include <linux/clk.h>
 #include <linux/err.h>
diff --git a/drivers/base/regmap/regmap-spi.c b/drivers/base/regmap/regmap-spi.c
index c7150dd..c1894e9 100644
--- a/drivers/base/regmap/regmap-spi.c
+++ b/drivers/base/regmap/regmap-spi.c
@@ -1,14 +1,10 @@
-/*
- * Register map access API - SPI support
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - SPI support
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
diff --git a/drivers/base/regmap/regmap-spmi.c b/drivers/base/regmap/regmap-spmi.c
index 0bfb8ed..cdf12d2 100644
--- a/drivers/base/regmap/regmap-spmi.c
+++ b/drivers/base/regmap/regmap-spmi.c
@@ -1,22 +1,13 @@
-/*
- * Register map access API - SPMI support
- *
- * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
- *
- * Based on regmap-i2c.c:
- * Copyright 2011 Wolfson Microelectronics plc
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - SPMI support
+//
+// Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+//
+// Based on regmap-i2c.c:
+// Copyright 2011 Wolfson Microelectronics plc
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
 #include <linux/regmap.h>
 #include <linux/spmi.h>
 #include <linux/module.h>
diff --git a/drivers/base/regmap/regmap-w1.c b/drivers/base/regmap/regmap-w1.c
index e6c64b0..3a7d30b 100644
--- a/drivers/base/regmap/regmap-w1.c
+++ b/drivers/base/regmap/regmap-w1.c
@@ -1,13 +1,9 @@
-/*
- * Register map access API - W1 (1-Wire) support
- *
- * Copyright (c) 2017 Radioavionica Corporation
- * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - W1 (1-Wire) support
+//
+// Copyright (c) 2017 Radioavionica Corporation
+// Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
 
 #include <linux/regmap.h>
 #include <linux/module.h>
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 0360a90..19f57cc 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1,14 +1,10 @@
-/*
- * Register map access API
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API
+//
+// Copyright 2011 Wolfson Microelectronics plc
+//
+// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 
 #include <linux/device.h>
 #include <linux/slab.h>
@@ -35,6 +31,16 @@
  */
 #undef LOG_DEVICE
 
+#ifdef LOG_DEVICE
+static inline bool regmap_should_log(struct regmap *map)
+{
+	return (map->dev && strcmp(dev_name(map->dev), LOG_DEVICE) == 0);
+}
+#else
+static inline bool regmap_should_log(struct regmap *map) { return false; }
+#endif
+
+
 static int _regmap_update_bits(struct regmap *map, unsigned int reg,
 			       unsigned int mask, unsigned int val,
 			       bool *change, bool force_write);
@@ -168,6 +174,17 @@
 	return false;
 }
 
+bool regmap_writeable_noinc(struct regmap *map, unsigned int reg)
+{
+	if (map->writeable_noinc_reg)
+		return map->writeable_noinc_reg(map->dev, reg);
+
+	if (map->wr_noinc_table)
+		return regmap_check_range_table(map, reg, map->wr_noinc_table);
+
+	return true;
+}
+
 bool regmap_readable_noinc(struct regmap *map, unsigned int reg)
 {
 	if (map->readable_noinc_reg)
@@ -762,8 +779,8 @@
 		map->reg_stride_order = ilog2(map->reg_stride);
 	else
 		map->reg_stride_order = -1;
-	map->use_single_read = config->use_single_rw || !bus || !bus->read;
-	map->use_single_write = config->use_single_rw || !bus || !bus->write;
+	map->use_single_read = config->use_single_read || !bus || !bus->read;
+	map->use_single_write = config->use_single_write || !bus || !bus->write;
 	map->can_multi_write = config->can_multi_write && bus && bus->write;
 	if (bus) {
 		map->max_raw_read = bus->max_raw_read;
@@ -777,11 +794,13 @@
 	map->rd_table = config->rd_table;
 	map->volatile_table = config->volatile_table;
 	map->precious_table = config->precious_table;
+	map->wr_noinc_table = config->wr_noinc_table;
 	map->rd_noinc_table = config->rd_noinc_table;
 	map->writeable_reg = config->writeable_reg;
 	map->readable_reg = config->readable_reg;
 	map->volatile_reg = config->volatile_reg;
 	map->precious_reg = config->precious_reg;
+	map->writeable_noinc_reg = config->writeable_noinc_reg;
 	map->readable_noinc_reg = config->readable_noinc_reg;
 	map->cache_type = config->cache_type;
 
@@ -1298,6 +1317,7 @@
 	map->readable_reg = config->readable_reg;
 	map->volatile_reg = config->volatile_reg;
 	map->precious_reg = config->precious_reg;
+	map->writeable_noinc_reg = config->writeable_noinc_reg;
 	map->readable_noinc_reg = config->readable_noinc_reg;
 	map->cache_type = config->cache_type;
 
@@ -1469,11 +1489,10 @@
 	WARN_ON(!map->bus);
 
 	/* Check for unwritable registers before we start */
-	if (map->writeable_reg)
-		for (i = 0; i < val_len / map->format.val_bytes; i++)
-			if (!map->writeable_reg(map->dev,
-					       reg + regmap_get_offset(map, i)))
-				return -EINVAL;
+	for (i = 0; i < val_len / map->format.val_bytes; i++)
+		if (!regmap_writeable(map,
+				     reg + regmap_get_offset(map, i)))
+			return -EINVAL;
 
 	if (!map->cache_bypass && map->format.parse_val) {
 		unsigned int ival;
@@ -1618,6 +1637,8 @@
 					     map->format.reg_bytes +
 					     map->format.pad_bytes,
 					     val, val_len);
+	else
+		ret = -ENOTSUPP;
 
 	/* If that didn't work fall back on linearising by hand. */
 	if (ret == -ENOTSUPP) {
@@ -1755,10 +1776,8 @@
 		}
 	}
 
-#ifdef LOG_DEVICE
-	if (map->dev && strcmp(dev_name(map->dev), LOG_DEVICE) == 0)
+	if (regmap_should_log(map))
 		dev_info(map->dev, "%x <= %x\n", reg, val);
-#endif
 
 	trace_regmap_reg_write(map, reg, val);
 
@@ -1898,6 +1917,69 @@
 EXPORT_SYMBOL_GPL(regmap_raw_write);
 
 /**
+ * regmap_noinc_write(): Write data from a register without incrementing the
+ *			register number
+ *
+ * @map: Register map to write to
+ * @reg: Register to write to
+ * @val: Pointer to data buffer
+ * @val_len: Length of output buffer in bytes.
+ *
+ * The regmap API usually assumes that bulk bus write operations will write a
+ * range of registers. Some devices have certain registers for which a write
+ * operation can write to an internal FIFO.
+ *
+ * The target register must be volatile but registers after it can be
+ * completely unrelated cacheable registers.
+ *
+ * This will attempt multiple writes as required to write val_len bytes.
+ *
+ * A value of zero will be returned on success, a negative errno will be
+ * returned in error cases.
+ */
+int regmap_noinc_write(struct regmap *map, unsigned int reg,
+		      const void *val, size_t val_len)
+{
+	size_t write_len;
+	int ret;
+
+	if (!map->bus)
+		return -EINVAL;
+	if (!map->bus->write)
+		return -ENOTSUPP;
+	if (val_len % map->format.val_bytes)
+		return -EINVAL;
+	if (!IS_ALIGNED(reg, map->reg_stride))
+		return -EINVAL;
+	if (val_len == 0)
+		return -EINVAL;
+
+	map->lock(map->lock_arg);
+
+	if (!regmap_volatile(map, reg) || !regmap_writeable_noinc(map, reg)) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	while (val_len) {
+		if (map->max_raw_write && map->max_raw_write < val_len)
+			write_len = map->max_raw_write;
+		else
+			write_len = val_len;
+		ret = _regmap_raw_write(map, reg, val, write_len);
+		if (ret)
+			goto out_unlock;
+		val = ((u8 *)val) + write_len;
+		val_len -= write_len;
+	}
+
+out_unlock:
+	map->unlock(map->lock_arg);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regmap_noinc_write);
+
+/**
  * regmap_field_update_bits_base() - Perform a read/modify/write cycle a
  *                                   register field.
  *
@@ -2450,10 +2532,8 @@
 
 	ret = map->reg_read(context, reg, val);
 	if (ret == 0) {
-#ifdef LOG_DEVICE
-		if (map->dev && strcmp(dev_name(map->dev), LOG_DEVICE) == 0)
+		if (regmap_should_log(map))
 			dev_info(map->dev, "%x => %x\n", reg, *val);
-#endif
 
 		trace_regmap_reg_read(map, reg, *val);