Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index f377044..f4138ae 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -3,78 +3,14 @@
#define _ASM_X86_MSHYPER_H
#include <linux/types.h>
-#include <linux/atomic.h>
#include <linux/nmi.h>
#include <asm/io.h>
#include <asm/hyperv-tlfs.h>
#include <asm/nospec-branch.h>
-#define VP_INVAL U32_MAX
-
-struct ms_hyperv_info {
- u32 features;
- u32 misc_features;
- u32 hints;
- u32 nested_features;
- u32 max_vp_index;
- u32 max_lp_index;
-};
-
-extern struct ms_hyperv_info ms_hyperv;
-
-/*
- * Generate the guest ID.
- */
-
-static inline __u64 generate_guest_id(__u64 d_info1, __u64 kernel_version,
- __u64 d_info2)
-{
- __u64 guest_id = 0;
-
- guest_id = (((__u64)HV_LINUX_VENDOR_ID) << 48);
- guest_id |= (d_info1 << 48);
- guest_id |= (kernel_version << 16);
- guest_id |= d_info2;
-
- return guest_id;
-}
-
-
-/* Free the message slot and signal end-of-message if required */
-static inline void vmbus_signal_eom(struct hv_message *msg, u32 old_msg_type)
-{
- /*
- * On crash we're reading some other CPU's message page and we need
- * to be careful: this other CPU may already had cleared the header
- * and the host may already had delivered some other message there.
- * In case we blindly write msg->header.message_type we're going
- * to lose it. We can still lose a message of the same type but
- * we count on the fact that there can only be one
- * CHANNELMSG_UNLOAD_RESPONSE and we don't care about other messages
- * on crash.
- */
- if (cmpxchg(&msg->header.message_type, old_msg_type,
- HVMSG_NONE) != old_msg_type)
- return;
-
- /*
- * Make sure the write to MessageType (ie set to
- * HVMSG_NONE) happens before we read the
- * MessagePending and EOMing. Otherwise, the EOMing
- * will not deliver any more messages since there is
- * no empty slot
- */
- mb();
-
- if (msg->header.message_flags.msg_pending) {
- /*
- * This will cause message queue rescan to
- * possibly deliver another msg from the
- * hypervisor
- */
- wrmsrl(HV_X64_MSR_EOM, 0);
- }
-}
+typedef int (*hyperv_fill_flush_list_func)(
+ struct hv_guest_mapping_flush_list *flush,
+ void *data);
#define hv_init_timer(timer, tick) \
wrmsrl(HV_X64_MSR_STIMER0_COUNT + (2*timer), tick)
@@ -92,6 +28,8 @@
#define hv_get_vp_index(index) rdmsrl(HV_X64_MSR_VP_INDEX, index)
+#define hv_signal_eom() wrmsrl(HV_X64_MSR_EOM, 0)
+
#define hv_get_synint_state(int_num, val) \
rdmsrl(HV_X64_MSR_SINT0 + int_num, val)
#define hv_set_synint_state(int_num, val) \
@@ -100,19 +38,23 @@
#define hv_get_crash_ctl(val) \
rdmsrl(HV_X64_MSR_CRASH_CTL, val)
+#define hv_get_time_ref_count(val) \
+ rdmsrl(HV_X64_MSR_TIME_REF_COUNT, val)
+
+#define hv_get_reference_tsc(val) \
+ rdmsrl(HV_X64_MSR_REFERENCE_TSC, val)
+#define hv_set_reference_tsc(val) \
+ wrmsrl(HV_X64_MSR_REFERENCE_TSC, val)
+#define hv_set_clocksource_vdso(val) \
+ ((val).archdata.vclock_mode = VCLOCK_HVCLOCK)
+#define hv_get_raw_timer() rdtsc_ordered()
+
void hyperv_callback_vector(void);
void hyperv_reenlightenment_vector(void);
#ifdef CONFIG_TRACING
#define trace_hyperv_callback_vector hyperv_callback_vector
#endif
void hyperv_vector_handler(struct pt_regs *regs);
-void hv_setup_vmbus_irq(void (*handler)(void));
-void hv_remove_vmbus_irq(void);
-
-void hv_setup_kexec_handler(void (*handler)(void));
-void hv_remove_kexec_handler(void);
-void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs));
-void hv_remove_crash_handler(void);
/*
* Routines for stimer0 Direct Mode handling.
@@ -120,15 +62,12 @@
*/
void hv_stimer0_vector_handler(struct pt_regs *regs);
void hv_stimer0_callback_vector(void);
-int hv_setup_stimer0_irq(int *irq, int *vector, void (*handler)(void));
-void hv_remove_stimer0_irq(int irq);
static inline void hv_enable_stimer0_percpu_irq(int irq) {}
static inline void hv_disable_stimer0_percpu_irq(int irq) {}
#if IS_ENABLED(CONFIG_HYPERV)
-extern struct clocksource *hyperv_cs;
extern void *hv_hypercall_pg;
extern void __percpu **hyperv_pcpu_input_arg;
@@ -232,7 +171,7 @@
: "cc");
}
#endif
- return hv_status;
+ return hv_status;
}
/*
@@ -267,14 +206,6 @@
return status;
}
-/*
- * Hypervisor's notion of virtual processor ID is different from
- * Linux' notion of CPU ID. This information can only be retrieved
- * in the context of the calling CPU. Setup a map for easy access
- * to this information.
- */
-extern u32 *hv_vp_index;
-extern u32 hv_max_vp_index;
extern struct hv_vp_assist_page **hv_vp_assist_page;
static inline struct hv_vp_assist_page *hv_get_vp_assist_page(unsigned int cpu)
@@ -285,81 +216,34 @@
return hv_vp_assist_page[cpu];
}
-/**
- * hv_cpu_number_to_vp_number() - Map CPU to VP.
- * @cpu_number: CPU number in Linux terms
- *
- * This function returns the mapping between the Linux processor
- * number and the hypervisor's virtual processor number, useful
- * in making hypercalls and such that talk about specific
- * processors.
- *
- * Return: Virtual processor number in Hyper-V terms
- */
-static inline int hv_cpu_number_to_vp_number(int cpu_number)
-{
- return hv_vp_index[cpu_number];
-}
-
-static inline int cpumask_to_vpset(struct hv_vpset *vpset,
- const struct cpumask *cpus)
-{
- int cpu, vcpu, vcpu_bank, vcpu_offset, nr_bank = 1;
-
- /* valid_bank_mask can represent up to 64 banks */
- if (hv_max_vp_index / 64 >= 64)
- return 0;
-
- /*
- * Clear all banks up to the maximum possible bank as hv_tlb_flush_ex
- * structs are not cleared between calls, we risk flushing unneeded
- * vCPUs otherwise.
- */
- for (vcpu_bank = 0; vcpu_bank <= hv_max_vp_index / 64; vcpu_bank++)
- vpset->bank_contents[vcpu_bank] = 0;
-
- /*
- * Some banks may end up being empty but this is acceptable.
- */
- for_each_cpu(cpu, cpus) {
- vcpu = hv_cpu_number_to_vp_number(cpu);
- if (vcpu == VP_INVAL)
- return -1;
- vcpu_bank = vcpu / 64;
- vcpu_offset = vcpu % 64;
- __set_bit(vcpu_offset, (unsigned long *)
- &vpset->bank_contents[vcpu_bank]);
- if (vcpu_bank >= nr_bank)
- nr_bank = vcpu_bank + 1;
- }
- vpset->valid_bank_mask = GENMASK_ULL(nr_bank - 1, 0);
- return nr_bank;
-}
-
void __init hyperv_init(void);
void hyperv_setup_mmu_ops(void);
-void hyperv_report_panic(struct pt_regs *regs, long err);
-void hyperv_report_panic_msg(phys_addr_t pa, size_t size);
-bool hv_is_hyperv_initialized(void);
-void hyperv_cleanup(void);
-
+void *hv_alloc_hyperv_page(void);
+void hv_free_hyperv_page(unsigned long addr);
void hyperv_reenlightenment_intr(struct pt_regs *regs);
void set_hv_tscchange_cb(void (*cb)(void));
void clear_hv_tscchange_cb(void);
void hyperv_stop_tsc_emulation(void);
int hyperv_flush_guest_mapping(u64 as);
+int hyperv_flush_guest_mapping_range(u64 as,
+ hyperv_fill_flush_list_func fill_func, void *data);
+int hyperv_fill_flush_guest_mapping_list(
+ struct hv_guest_mapping_flush_list *flush,
+ u64 start_gfn, u64 end_gfn);
#ifdef CONFIG_X86_64
void hv_apic_init(void);
+void __init hv_init_spinlocks(void);
+bool hv_vcpu_is_preempted(int vcpu);
#else
static inline void hv_apic_init(void) {}
#endif
#else /* CONFIG_HYPERV */
static inline void hyperv_init(void) {}
-static inline bool hv_is_hyperv_initialized(void) { return false; }
-static inline void hyperv_cleanup(void) {}
static inline void hyperv_setup_mmu_ops(void) {}
+static inline void *hv_alloc_hyperv_page(void) { return NULL; }
+static inline void hv_free_hyperv_page(unsigned long addr) {}
static inline void set_hv_tscchange_cb(void (*cb)(void)) {}
static inline void clear_hv_tscchange_cb(void) {}
static inline void hyperv_stop_tsc_emulation(void) {};
@@ -368,75 +252,14 @@
return NULL;
}
static inline int hyperv_flush_guest_mapping(u64 as) { return -1; }
+static inline int hyperv_flush_guest_mapping_range(u64 as,
+ hyperv_fill_flush_list_func fill_func, void *data)
+{
+ return -1;
+}
#endif /* CONFIG_HYPERV */
-#ifdef CONFIG_HYPERV_TSCPAGE
-struct ms_hyperv_tsc_page *hv_get_tsc_page(void);
-static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
- u64 *cur_tsc)
-{
- u64 scale, offset;
- u32 sequence;
- /*
- * The protocol for reading Hyper-V TSC page is specified in Hypervisor
- * Top-Level Functional Specification ver. 3.0 and above. To get the
- * reference time we must do the following:
- * - READ ReferenceTscSequence
- * A special '0' value indicates the time source is unreliable and we
- * need to use something else. The currently published specification
- * versions (up to 4.0b) contain a mistake and wrongly claim '-1'
- * instead of '0' as the special value, see commit c35b82ef0294.
- * - ReferenceTime =
- * ((RDTSC() * ReferenceTscScale) >> 64) + ReferenceTscOffset
- * - READ ReferenceTscSequence again. In case its value has changed
- * since our first reading we need to discard ReferenceTime and repeat
- * the whole sequence as the hypervisor was updating the page in
- * between.
- */
- do {
- sequence = READ_ONCE(tsc_pg->tsc_sequence);
- if (!sequence)
- return U64_MAX;
- /*
- * Make sure we read sequence before we read other values from
- * TSC page.
- */
- smp_rmb();
+#include <asm-generic/mshyperv.h>
- scale = READ_ONCE(tsc_pg->tsc_scale);
- offset = READ_ONCE(tsc_pg->tsc_offset);
- *cur_tsc = rdtsc_ordered();
-
- /*
- * Make sure we read sequence after we read all other values
- * from TSC page.
- */
- smp_rmb();
-
- } while (READ_ONCE(tsc_pg->tsc_sequence) != sequence);
-
- return mul_u64_u64_shr(*cur_tsc, scale, 64) + offset;
-}
-
-static inline u64 hv_read_tsc_page(const struct ms_hyperv_tsc_page *tsc_pg)
-{
- u64 cur_tsc;
-
- return hv_read_tsc_page_tsc(tsc_pg, &cur_tsc);
-}
-
-#else
-static inline struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
-{
- return NULL;
-}
-
-static inline u64 hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg,
- u64 *cur_tsc)
-{
- BUG();
- return U64_MAX;
-}
-#endif
#endif