Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 9547cf1..7367416 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1,85 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
if ATH79
-menu "Atheros AR71XX/AR724X/AR913X machine selection"
-
-config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP121 reference board.
-
-config ATH79_MACH_AP136
- bool "Atheros AP136 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP136 reference board.
-
-config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
- select SOC_AR913X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros AP81 reference board.
-
-config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Atheros DB120 reference board.
-
-config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- help
- Say 'Y' here if you want your kernel to support the
- Atheros PB44 reference board.
-
-config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
- select SOC_AR724X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
-
-endmenu
-
config SOC_AR71XX
- select HW_HAS_PCI
+ select HAVE_PCI
def_bool n
config SOC_AR724X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
@@ -90,12 +17,12 @@
def_bool n
config SOC_AR934X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
config SOC_QCA955X
- select HW_HAS_PCI
+ select HAVE_PCI
select PCI_AR724X if PCI
def_bool n
diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
index fcc382c..0fb3aaf 100644
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -1,34 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
#
# Makefile for the Atheros AR71XX/AR724X/AR913X specific parts of the kernel
#
# Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-obj-y := prom.o setup.o irq.o common.o clock.o
+obj-y := prom.o setup.o common.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_PCI) += pci.o
-
-#
-# Devices
-#
-obj-y += dev-common.o
-obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
-obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
-obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
-obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
-
-#
-# Machines
-#
-obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
-obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
-obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
-obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
-obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index cf9158e..050f655 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Atheros AR71XX/AR724X/AR913X common routines
*
@@ -5,14 +6,11 @@
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
@@ -26,7 +24,6 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
-#include "machtypes.h"
#define AR71XX_BASE_FREQ 40000000
#define AR724X_BASE_FREQ 40000000
@@ -37,24 +34,63 @@
.clk_num = ARRAY_SIZE(clks),
};
-static struct clk *__init ath79_add_sys_clkdev(
- const char *id, unsigned long rate)
+static const char * const clk_names[ATH79_CLK_END] = {
+ [ATH79_CLK_CPU] = "cpu",
+ [ATH79_CLK_DDR] = "ddr",
+ [ATH79_CLK_AHB] = "ahb",
+ [ATH79_CLK_REF] = "ref",
+ [ATH79_CLK_MDIO] = "mdio",
+};
+
+static const char * __init ath79_clk_name(int type)
{
- struct clk *clk;
- int err;
+ BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]);
+ return clk_names[type];
+}
- clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
+static void __init __ath79_set_clk(int type, const char *name, struct clk *clk)
+{
if (IS_ERR(clk))
- panic("failed to allocate %s clock structure", id);
+ panic("failed to allocate %s clock structure", clk_names[type]);
- err = clk_register_clkdev(clk, id, NULL);
- if (err)
- panic("unable to register %s clock device", id);
+ clks[type] = clk;
+ clk_register_clkdev(clk, name, NULL);
+}
+static struct clk * __init ath79_set_clk(int type, unsigned long rate)
+{
+ const char *name = ath79_clk_name(type);
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate);
+ __ath79_set_clk(type, name, clk);
return clk;
}
-static void __init ar71xx_clocks_init(void)
+static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
+ unsigned int mult, unsigned int div)
+{
+ const char *name = ath79_clk_name(type);
+ struct clk *clk;
+
+ clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div);
+ __ath79_set_clk(type, name, clk);
+ return clk;
+}
+
+static unsigned long __init ath79_setup_ref_clk(unsigned long rate)
+{
+ struct clk *clk = clks[ATH79_CLK_REF];
+
+ if (clk)
+ rate = clk_get_rate(clk);
+ else
+ clk = ath79_set_clk(ATH79_CLK_REF, rate);
+
+ return rate;
+}
+
+static void __init ar71xx_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -64,9 +100,9 @@
u32 freq;
u32 div;
- ref_rate = AR71XX_BASE_FREQ;
+ ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ);
- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
+ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
freq = div * ref_rate;
@@ -80,31 +116,17 @@
div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
ahb_rate = cpu_rate / div;
- ath79_add_sys_clkdev("ref", ref_rate);
- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ahb", NULL);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
}
-static struct clk * __init ath79_reg_ffclk(const char *name,
- const char *parent_name, unsigned int mult, unsigned int div)
+static void __init ar724x_clocks_init(void __iomem *pll_base)
{
- struct clk *clk;
-
- clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
- if (IS_ERR(clk))
- panic("failed to allocate %s clock structure", name);
-
- return clk;
-}
-
-static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-{
- u32 pll;
u32 mult, div, ddr_div, ahb_div;
+ u32 pll;
+
+ ath79_setup_ref_clk(AR71XX_BASE_FREQ);
pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
@@ -114,30 +136,14 @@
ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div);
+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div);
+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
}
-static void __init ar724x_clocks_init(void)
+static void __init ar933x_clocks_init(void __iomem *pll_base)
{
- struct clk *ref_clk;
-
- ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
-
- ar724x_clk_init(ref_clk, ath79_pll_base);
-
- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
-
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ahb", NULL);
-}
-
-static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-{
+ unsigned long ref_rate;
u32 clock_ctrl;
u32 ref_div;
u32 ninit_mul;
@@ -146,6 +152,15 @@
u32 cpu_div;
u32 ddr_div;
u32 ahb_div;
+ u32 t;
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+ ref_rate = (40 * 1000 * 1000);
+ else
+ ref_rate = (25 * 1000 * 1000);
+
+ ath79_setup_ref_clk(ref_rate);
clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
@@ -186,37 +201,12 @@
AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
}
- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
- ninit_mul, ref_div * out_div * cpu_div);
- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
- ninit_mul, ref_div * out_div * ddr_div);
- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
- ninit_mul, ref_div * out_div * ahb_div);
-}
-
-static void __init ar933x_clocks_init(void)
-{
- struct clk *ref_clk;
- unsigned long ref_rate;
- u32 t;
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
- ref_rate = (40 * 1000 * 1000);
- else
- ref_rate = (25 * 1000 * 1000);
-
- ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
-
- ar9330_clk_init(ref_clk, ath79_pll_base);
-
- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
-
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul,
+ ref_div * out_div * cpu_div);
+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul,
+ ref_div * out_div * ddr_div);
+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul,
+ ref_div * out_div * ahb_div);
}
static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
@@ -239,7 +229,7 @@
return ret;
}
-static void __init ar934x_clocks_init(void)
+static void __init ar934x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -258,6 +248,8 @@
else
ref_rate = 25 * 1000 * 1000;
+ ref_rate = ath79_setup_ref_clk(ref_rate);
+
pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
@@ -270,7 +262,7 @@
AR934X_SRIF_DPLL1_REFDIV_MASK;
frac = 1 << 18;
} else {
- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
+ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
@@ -297,7 +289,7 @@
AR934X_SRIF_DPLL1_REFDIV_MASK;
frac = 1 << 18;
} else {
- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
@@ -312,7 +304,7 @@
ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
nfrac, frac, out_div);
- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -344,18 +336,18 @@
else
ahb_rate = cpu_pll / (postdiv + 1);
- ath79_add_sys_clkdev("ref", ref_rate);
- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
+ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
iounmap(dpll_base);
}
-static void __init qca953x_clocks_init(void)
+static void __init qca953x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -371,7 +363,9 @@
else
ref_rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
+ ref_rate = ath79_setup_ref_clk(ref_rate);
+
+ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
@@ -385,7 +379,7 @@
cpu_pll += frac * (ref_rate >> 6) / ref_div;
cpu_pll /= (1 << out_div);
- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
@@ -399,7 +393,7 @@
ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
ddr_pll /= (1 << out_div);
- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -431,16 +425,12 @@
else
ahb_rate = cpu_pll / (postdiv + 1);
- ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
}
-static void __init qca955x_clocks_init(void)
+static void __init qca955x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -456,7 +446,9 @@
else
ref_rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
+ ref_rate = ath79_setup_ref_clk(ref_rate);
+
+ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
@@ -470,7 +462,7 @@
cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
cpu_pll /= (1 << out_div);
- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
@@ -484,7 +476,7 @@
ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
ddr_pll /= (1 << out_div);
- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -516,16 +508,12 @@
else
ahb_rate = cpu_pll / (postdiv + 1);
- ath79_add_sys_clkdev("ref", ref_rate);
- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
}
-static void __init qca956x_clocks_init(void)
+static void __init qca956x_clocks_init(void __iomem *pll_base)
{
unsigned long ref_rate;
unsigned long cpu_rate;
@@ -551,13 +539,15 @@
else
ref_rate = 25 * 1000 * 1000;
- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
+ ref_rate = ath79_setup_ref_clk(ref_rate);
+
+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
@@ -570,12 +560,12 @@
cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
cpu_pll /= (1 << out_div);
- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
@@ -588,7 +578,7 @@
ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
ddr_pll /= (1 << out_div);
- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
+ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
@@ -620,72 +610,19 @@
else
ahb_rate = cpu_pll / (postdiv + 1);
- ath79_add_sys_clkdev("ref", ref_rate);
- ath79_add_sys_clkdev("cpu", cpu_rate);
- ath79_add_sys_clkdev("ddr", ddr_rate);
- ath79_add_sys_clkdev("ahb", ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
}
-void __init ath79_clocks_init(void)
-{
- if (soc_is_ar71xx())
- ar71xx_clocks_init();
- else if (soc_is_ar724x() || soc_is_ar913x())
- ar724x_clocks_init();
- else if (soc_is_ar933x())
- ar933x_clocks_init();
- else if (soc_is_ar934x())
- ar934x_clocks_init();
- else if (soc_is_qca953x())
- qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
- else if (soc_is_qca956x() || soc_is_tp9343())
- qca956x_clocks_init();
- else
- BUG();
-}
-
-unsigned long __init
-ath79_get_sys_clk_rate(const char *id)
-{
- struct clk *clk;
- unsigned long rate;
-
- clk = clk_get(NULL, id);
- if (IS_ERR(clk))
- panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
-
- rate = clk_get_rate(clk);
- clk_put(clk);
-
- return rate;
-}
-
-#ifdef CONFIG_OF
static void __init ath79_clocks_init_dt(struct device_node *np)
{
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-}
-
-CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
-CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
-
-static void __init ath79_clocks_init_dt_ng(struct device_node *np)
-{
struct clk *ref_clk;
void __iomem *pll_base;
ref_clk = of_clk_get(np, 0);
- if (IS_ERR(ref_clk)) {
- pr_err("%pOF: of_clk_get failed\n", np);
- goto err;
- }
+ if (!IS_ERR(ref_clk))
+ clks[ATH79_CLK_REF] = ref_clk;
pll_base = of_iomap(np, 0);
if (!pll_base) {
@@ -693,14 +630,24 @@
goto err_clk;
}
- if (of_device_is_compatible(np, "qca,ar9130-pll"))
- ar724x_clk_init(ref_clk, pll_base);
+ if (of_device_is_compatible(np, "qca,ar7100-pll"))
+ ar71xx_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,ar7240-pll") ||
+ of_device_is_compatible(np, "qca,ar9130-pll"))
+ ar724x_clocks_init(pll_base);
else if (of_device_is_compatible(np, "qca,ar9330-pll"))
- ar9330_clk_init(ref_clk, pll_base);
- else {
- pr_err("%pOF: could not find any appropriate clk_init()\n", np);
- goto err_iounmap;
- }
+ ar933x_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,ar9340-pll"))
+ ar934x_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,qca9530-pll"))
+ qca953x_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,qca9550-pll"))
+ qca955x_clocks_init(pll_base);
+ else if (of_device_is_compatible(np, "qca,qca9560-pll"))
+ qca956x_clocks_init(pll_base);
+
+ if (!clks[ATH79_CLK_MDIO])
+ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
pr_err("%pOF: could not register clk provider\n", np);
@@ -714,10 +661,13 @@
err_clk:
clk_put(ref_clk);
-
-err:
- return;
}
-CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
-CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
-#endif
+
+CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
+CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c
index cd6055f..63eacb8 100644
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Atheros AR71XX/AR724X/AR913X common routines
*
@@ -6,10 +7,6 @@
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/kernel.h>
diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h
index 870c6b2..47fb66d 100644
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Atheros AR71XX/AR724X/AR913X common definitions
*
@@ -5,10 +6,6 @@
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#ifndef __ATH79_COMMON_H
@@ -19,11 +16,6 @@
#define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024)
#define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024)
-void ath79_clocks_init(void);
-unsigned long ath79_get_sys_clk_rate(const char *id);
-
void ath79_ddr_ctrl_init(void);
-void ath79_gpio_init(void);
-
#endif /* __ATH79_COMMON_H */
diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c
deleted file mode 100644
index 9d0172a..0000000
--- a/arch/mips/ath79/dev-common.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X common devices
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-ath79.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-common.h"
-
-static struct resource ath79_uart_resources[] = {
- {
- .start = AR71XX_UART_BASE,
- .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
-static struct plat_serial8250_port ath79_uart_data[] = {
- {
- .mapbase = AR71XX_UART_BASE,
- .irq = ATH79_MISC_IRQ(3),
- .flags = AR71XX_UART_FLAGS,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- }, {
- /* terminating entry */
- }
-};
-
-static struct platform_device ath79_uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .resource = ath79_uart_resources,
- .num_resources = ARRAY_SIZE(ath79_uart_resources),
- .dev = {
- .platform_data = ath79_uart_data
- },
-};
-
-static struct resource ar933x_uart_resources[] = {
- {
- .start = AR933X_UART_BASE,
- .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = ATH79_MISC_IRQ(3),
- .end = ATH79_MISC_IRQ(3),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ar933x_uart_device = {
- .name = "ar933x-uart",
- .id = -1,
- .resource = ar933x_uart_resources,
- .num_resources = ARRAY_SIZE(ar933x_uart_resources),
-};
-
-void __init ath79_register_uart(void)
-{
- unsigned long uart_clk_rate;
-
- uart_clk_rate = ath79_get_sys_clk_rate("uart");
-
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
- soc_is_ar913x() ||
- soc_is_ar934x() ||
- soc_is_qca955x()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
- } else if (soc_is_ar933x()) {
- platform_device_register(&ar933x_uart_device);
- } else {
- BUG();
- }
-}
-
-void __init ath79_register_wdt(void)
-{
- struct resource res;
-
- memset(&res, 0, sizeof(res));
-
- res.flags = IORESOURCE_MEM;
- res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL;
- res.end = res.start + 0x8 - 1;
-
- platform_device_register_simple("ath79-wdt", -1, &res, 1);
-}
-
-static struct ath79_gpio_platform_data ath79_gpio_pdata;
-
-static struct resource ath79_gpio_resources[] = {
- {
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GPIO_BASE,
- .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
- },
- {
- .start = ATH79_MISC_IRQ(2),
- .end = ATH79_MISC_IRQ(2),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ath79_gpio_device = {
- .name = "ath79-gpio",
- .id = -1,
- .resource = ath79_gpio_resources,
- .num_resources = ARRAY_SIZE(ath79_gpio_resources),
- .dev = {
- .platform_data = &ath79_gpio_pdata
- },
-};
-
-void __init ath79_gpio_init(void)
-{
- if (soc_is_ar71xx()) {
- ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
- } else if (soc_is_ar7240()) {
- ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
- } else if (soc_is_ar7241() || soc_is_ar7242()) {
- ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
- } else if (soc_is_ar913x()) {
- ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
- } else if (soc_is_ar933x()) {
- ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
- } else if (soc_is_ar934x()) {
- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
- } else {
- BUG();
- }
-
- platform_device_register(&ath79_gpio_device);
-}
diff --git a/arch/mips/ath79/dev-common.h b/arch/mips/ath79/dev-common.h
deleted file mode 100644
index 0f514e1..0000000
--- a/arch/mips/ath79/dev-common.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X common devices
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_COMMON_H
-#define _ATH79_DEV_COMMON_H
-
-void ath79_register_uart(void);
-void ath79_register_wdt(void);
-
-#endif /* _ATH79_DEV_COMMON_H */
diff --git a/arch/mips/ath79/dev-gpio-buttons.c b/arch/mips/ath79/dev-gpio-buttons.c
deleted file mode 100644
index 366b35f..0000000
--- a/arch/mips/ath79/dev-gpio-buttons.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X GPIO button support
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "linux/init.h"
-#include "linux/slab.h"
-#include <linux/platform_device.h>
-
-#include "dev-gpio-buttons.h"
-
-void __init ath79_register_gpio_keys_polled(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons)
-{
- struct platform_device *pdev;
- struct gpio_keys_platform_data pdata;
- struct gpio_keys_button *p;
- int err;
-
- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- pdev = platform_device_alloc("gpio-keys-polled", id);
- if (!pdev)
- goto err_free_buttons;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.poll_interval = poll_interval;
- pdata.nbuttons = nbuttons;
- pdata.buttons = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_buttons:
- kfree(p);
-}
diff --git a/arch/mips/ath79/dev-gpio-buttons.h b/arch/mips/ath79/dev-gpio-buttons.h
deleted file mode 100644
index 481847a..0000000
--- a/arch/mips/ath79/dev-gpio-buttons.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X GPIO button support
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_GPIO_BUTTONS_H
-#define _ATH79_DEV_GPIO_BUTTONS_H
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-void ath79_register_gpio_keys_polled(int id,
- unsigned poll_interval,
- unsigned nbuttons,
- struct gpio_keys_button *buttons);
-
-#endif /* _ATH79_DEV_GPIO_BUTTONS_H */
diff --git a/arch/mips/ath79/dev-leds-gpio.c b/arch/mips/ath79/dev-leds-gpio.c
deleted file mode 100644
index dcb1deb..0000000
--- a/arch/mips/ath79/dev-leds-gpio.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-
-#include "dev-leds-gpio.h"
-
-void __init ath79_register_leds_gpio(int id,
- unsigned num_leds,
- struct gpio_led *leds)
-{
- struct platform_device *pdev;
- struct gpio_led_platform_data pdata;
- struct gpio_led *p;
- int err;
-
- p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
- if (!p)
- return;
-
- pdev = platform_device_alloc("leds-gpio", id);
- if (!pdev)
- goto err_free_leds;
-
- memset(&pdata, 0, sizeof(pdata));
- pdata.num_leds = num_leds;
- pdata.leds = p;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto err_put_pdev;
-
- err = platform_device_add(pdev);
- if (err)
- goto err_put_pdev;
-
- return;
-
-err_put_pdev:
- platform_device_put(pdev);
-
-err_free_leds:
- kfree(p);
-}
diff --git a/arch/mips/ath79/dev-leds-gpio.h b/arch/mips/ath79/dev-leds-gpio.h
deleted file mode 100644
index 6e5d885..0000000
--- a/arch/mips/ath79/dev-leds-gpio.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_LEDS_GPIO_H
-#define _ATH79_DEV_LEDS_GPIO_H
-
-#include <linux/leds.h>
-
-void ath79_register_leds_gpio(int id,
- unsigned num_leds,
- struct gpio_led *leds);
-
-#endif /* _ATH79_DEV_LEDS_GPIO_H */
diff --git a/arch/mips/ath79/dev-spi.c b/arch/mips/ath79/dev-spi.c
deleted file mode 100644
index aa30163..0000000
--- a/arch/mips/ath79/dev-spi.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X SPI controller device
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "dev-spi.h"
-
-static struct resource ath79_spi_resources[] = {
- {
- .start = AR71XX_SPI_BASE,
- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ath79_spi_device = {
- .name = "ath79-spi",
- .id = -1,
- .resource = ath79_spi_resources,
- .num_resources = ARRAY_SIZE(ath79_spi_resources),
-};
-
-void __init ath79_register_spi(struct ath79_spi_platform_data *pdata,
- struct spi_board_info const *info,
- unsigned n)
-{
- spi_register_board_info(info, n);
- ath79_spi_device.dev.platform_data = pdata;
- platform_device_register(&ath79_spi_device);
-}
diff --git a/arch/mips/ath79/dev-spi.h b/arch/mips/ath79/dev-spi.h
deleted file mode 100644
index d732565..0000000
--- a/arch/mips/ath79/dev-spi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X SPI controller device
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_SPI_H
-#define _ATH79_DEV_SPI_H
-
-#include <linux/spi/spi.h>
-#include <asm/mach-ath79/ath79_spi_platform.h>
-
-void ath79_register_spi(struct ath79_spi_platform_data *pdata,
- struct spi_board_info const *info,
- unsigned n);
-
-#endif /* _ATH79_DEV_SPI_H */
diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c
deleted file mode 100644
index 8227265..0000000
--- a/arch/mips/ath79/dev-usb.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Atheros AR7XXX/AR9XXX USB Host Controller device
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-usb.h"
-
-static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
-
-static struct usb_ohci_pdata ath79_ohci_pdata = {
-};
-
-static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
- .has_synopsys_hc_bug = 1,
-};
-
-static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
- .caps_offset = 0x100,
- .has_tt = 1,
-};
-
-static void __init ath79_usb_register(const char *name, int id,
- unsigned long base, unsigned long size,
- int irq, const void *data,
- size_t data_size)
-{
- struct resource res[2];
- struct platform_device *pdev;
-
- memset(res, 0, sizeof(res));
-
- res[0].flags = IORESOURCE_MEM;
- res[0].start = base;
- res[0].end = base + size - 1;
-
- res[1].flags = IORESOURCE_IRQ;
- res[1].start = irq;
- res[1].end = irq;
-
- pdev = platform_device_register_resndata(NULL, name, id,
- res, ARRAY_SIZE(res),
- data, data_size);
-
- if (IS_ERR(pdev)) {
- pr_err("ath79: unable to register USB at %08lx, err=%d\n",
- base, (int) PTR_ERR(pdev));
- return;
- }
-
- pdev->dev.dma_mask = &ath79_usb_dmamask;
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-}
-
-#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
- AR71XX_RESET_USB_PHY | \
- AR71XX_RESET_USB_OHCI_DLL)
-
-static void __init ath79_usb_setup(void)
-{
- void __iomem *usb_ctrl_base;
-
- ath79_device_reset_set(AR71XX_USB_RESET_MASK);
- mdelay(1000);
- ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
-
- usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
-
- /* Turning on the Buff and Desc swap bits */
- __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
-
- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
- __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
-
- iounmap(usb_ctrl_base);
-
- mdelay(900);
-
- ath79_usb_register("ohci-platform", -1,
- AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
- ATH79_MISC_IRQ(6),
- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
-
- ath79_usb_register("ehci-platform", -1,
- AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
-}
-
-static void __init ar7240_usb_setup(void)
-{
- void __iomem *usb_ctrl_base;
-
- ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
- ath79_device_reset_set(AR7240_RESET_USB_HOST);
-
- mdelay(1000);
-
- ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
- ath79_device_reset_clear(AR7240_RESET_USB_HOST);
-
- usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
-
- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
- __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
-
- iounmap(usb_ctrl_base);
-
- ath79_usb_register("ohci-platform", -1,
- AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
-}
-
-static void __init ar724x_usb_setup(void)
-{
- ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
- mdelay(10);
-
- ath79_device_reset_clear(AR724X_RESET_USB_HOST);
- mdelay(10);
-
- ath79_device_reset_clear(AR724X_RESET_USB_PHY);
- mdelay(10);
-
- ath79_usb_register("ehci-platform", -1,
- AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-}
-
-static void __init ar913x_usb_setup(void)
-{
- ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
- mdelay(10);
-
- ath79_device_reset_clear(AR913X_RESET_USB_HOST);
- mdelay(10);
-
- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
- mdelay(10);
-
- ath79_usb_register("ehci-platform", -1,
- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-}
-
-static void __init ar933x_usb_setup(void)
-{
- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
- mdelay(10);
-
- ath79_device_reset_clear(AR933X_RESET_USB_HOST);
- mdelay(10);
-
- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
- mdelay(10);
-
- ath79_usb_register("ehci-platform", -1,
- AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-}
-
-static void __init ar934x_usb_setup(void)
-{
- u32 bootstrap;
-
- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
- return;
-
- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
- udelay(1000);
-
- ath79_device_reset_clear(AR934X_RESET_USB_PHY);
- udelay(1000);
-
- ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
- udelay(1000);
-
- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
- udelay(1000);
-
- ath79_usb_register("ehci-platform", -1,
- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-}
-
-static void __init qca955x_usb_setup(void)
-{
- ath79_usb_register("ehci-platform", 0,
- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
- ATH79_IP3_IRQ(0),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-
- ath79_usb_register("ehci-platform", 1,
- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
- ATH79_IP3_IRQ(1),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-}
-
-void __init ath79_register_usb(void)
-{
- if (soc_is_ar71xx())
- ath79_usb_setup();
- else if (soc_is_ar7240())
- ar7240_usb_setup();
- else if (soc_is_ar7241() || soc_is_ar7242())
- ar724x_usb_setup();
- else if (soc_is_ar913x())
- ar913x_usb_setup();
- else if (soc_is_ar933x())
- ar933x_usb_setup();
- else if (soc_is_ar934x())
- ar934x_usb_setup();
- else if (soc_is_qca955x())
- qca955x_usb_setup();
- else
- BUG();
-}
diff --git a/arch/mips/ath79/dev-usb.h b/arch/mips/ath79/dev-usb.h
deleted file mode 100644
index 4b86a69..0000000
--- a/arch/mips/ath79/dev-usb.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X USB Host Controller support
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_USB_H
-#define _ATH79_DEV_USB_H
-
-void ath79_register_usb(void);
-
-#endif /* _ATH79_DEV_USB_H */
diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c
deleted file mode 100644
index da190b1..0000000
--- a/arch/mips/ath79/dev-wmac.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Atheros AR913X/AR933X SoC built-in WMAC device support
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "dev-wmac.h"
-
-static struct ath9k_platform_data ath79_wmac_data;
-
-static struct resource ath79_wmac_resources[] = {
- {
- /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_MEM,
- }, {
- /* .start and .end fields are filled dynamically */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device ath79_wmac_device = {
- .name = "ath9k",
- .id = -1,
- .resource = ath79_wmac_resources,
- .num_resources = ARRAY_SIZE(ath79_wmac_resources),
- .dev = {
- .platform_data = &ath79_wmac_data,
- },
-};
-
-static void __init ar913x_wmac_setup(void)
-{
- /* reset the WMAC */
- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
-}
-
-
-static int ar933x_wmac_reset(void)
-{
- ath79_device_reset_set(AR933X_RESET_WMAC);
- ath79_device_reset_clear(AR933X_RESET_WMAC);
-
- return 0;
-}
-
-static int ar933x_r1_get_wmac_revision(void)
-{
- return ath79_soc_rev;
-}
-
-static void __init ar933x_wmac_setup(void)
-{
- u32 t;
-
- ar933x_wmac_reset();
-
- ath79_wmac_device.name = "ar933x_wmac";
-
- ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-
- if (ath79_soc_rev == 1)
- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
-
- ath79_wmac_data.external_reset = ar933x_wmac_reset;
-}
-
-static void ar934x_wmac_setup(void)
-{
- u32 t;
-
- ath79_wmac_device.name = "ar934x_wmac";
-
- ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
-
- t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
- if (t & AR934X_BOOTSTRAP_REF_CLK_40)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-}
-
-static void qca955x_wmac_setup(void)
-{
- u32 t;
-
- ath79_wmac_device.name = "qca955x_wmac";
-
- ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
- ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
-
- t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
- if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-}
-
-void __init ath79_register_wmac(u8 *cal_data)
-{
- if (soc_is_ar913x())
- ar913x_wmac_setup();
- else if (soc_is_ar933x())
- ar933x_wmac_setup();
- else if (soc_is_ar934x())
- ar934x_wmac_setup();
- else if (soc_is_qca955x())
- qca955x_wmac_setup();
- else
- BUG();
-
- if (cal_data)
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
- platform_device_register(&ath79_wmac_device);
-}
diff --git a/arch/mips/ath79/dev-wmac.h b/arch/mips/ath79/dev-wmac.h
deleted file mode 100644
index c9cd870..0000000
--- a/arch/mips/ath79/dev-wmac.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Atheros AR913X/AR933X SoC built-in WMAC device support
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_WMAC_H
-#define _ATH79_DEV_WMAC_H
-
-void ath79_register_wmac(u8 *cal_data);
-
-#endif /* _ATH79_DEV_WMAC_H */
diff --git a/arch/mips/ath79/early_printk.c b/arch/mips/ath79/early_printk.c
index 4b10631..782732c 100644
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Atheros AR7XXX/AR9XXX SoC early printk support
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/io.h>
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
deleted file mode 100644
index 2dfff1f..0000000
--- a/arch/mips/ath79/irq.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Atheros AR71xx/AR724x/AR913x specific interrupt handling
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irqchip.h>
-#include <linux/of_irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "machtypes.h"
-
-
-static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
-{
- u32 status;
-
- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
-
- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
- ath79_ddr_wb_flush(3);
- generic_handle_irq(ATH79_IP2_IRQ(0));
- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
- ath79_ddr_wb_flush(4);
- generic_handle_irq(ATH79_IP2_IRQ(1));
- } else {
- spurious_interrupt();
- }
-}
-
-static void ar934x_ip2_irq_init(void)
-{
- int i;
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
- irq_set_chip_and_handler(i, &dummy_irq_chip,
- handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
-}
-
-static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
-{
- u32 status;
-
- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
- status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
-
- if (status == 0) {
- spurious_interrupt();
- return;
- }
-
- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
- /* TODO: flush DDR? */
- generic_handle_irq(ATH79_IP2_IRQ(0));
- }
-
- if (status & QCA955X_EXT_INT_WMAC_ALL) {
- /* TODO: flush DDR? */
- generic_handle_irq(ATH79_IP2_IRQ(1));
- }
-}
-
-static void qca955x_ip3_irq_dispatch(struct irq_desc *desc)
-{
- u32 status;
-
- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
- status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
- QCA955X_EXT_INT_USB1 |
- QCA955X_EXT_INT_USB2;
-
- if (status == 0) {
- spurious_interrupt();
- return;
- }
-
- if (status & QCA955X_EXT_INT_USB1) {
- /* TODO: flush DDR? */
- generic_handle_irq(ATH79_IP3_IRQ(0));
- }
-
- if (status & QCA955X_EXT_INT_USB2) {
- /* TODO: flush DDR? */
- generic_handle_irq(ATH79_IP3_IRQ(1));
- }
-
- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
- /* TODO: flush DDR? */
- generic_handle_irq(ATH79_IP3_IRQ(2));
- }
-}
-
-static void qca955x_irq_init(void)
-{
- int i;
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
- irq_set_chip_and_handler(i, &dummy_irq_chip,
- handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
-
- for (i = ATH79_IP3_IRQ_BASE;
- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
- irq_set_chip_and_handler(i, &dummy_irq_chip,
- handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
-}
-
-void __init arch_init_irq(void)
-{
- unsigned irq_wb_chan2 = -1;
- unsigned irq_wb_chan3 = -1;
- bool misc_is_ar71xx;
-
- if (mips_machtype == ATH79_MACH_GENERIC_OF) {
- irqchip_init();
- return;
- }
-
- if (soc_is_ar71xx() || soc_is_ar724x() ||
- soc_is_ar913x() || soc_is_ar933x()) {
- irq_wb_chan2 = 3;
- irq_wb_chan3 = 2;
- } else if (soc_is_ar934x()) {
- irq_wb_chan3 = 2;
- }
-
- ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
-
- if (soc_is_ar71xx() || soc_is_ar913x())
- misc_is_ar71xx = true;
- else if (soc_is_ar724x() ||
- soc_is_ar933x() ||
- soc_is_ar934x() ||
- soc_is_qca955x())
- misc_is_ar71xx = false;
- else
- BUG();
- ath79_misc_irq_init(
- ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
- ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
-
- if (soc_is_ar934x())
- ar934x_ip2_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
-}
diff --git a/arch/mips/ath79/mach-ap121.c b/arch/mips/ath79/mach-ap121.c
deleted file mode 100644
index 1bf73f2..0000000
--- a/arch/mips/ath79/mach-ap121.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Atheros AP121 board support
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define AP121_GPIO_LED_WLAN 0
-#define AP121_GPIO_LED_USB 1
-
-#define AP121_GPIO_BTN_JUMPSTART 11
-#define AP121_GPIO_BTN_RESET 12
-
-#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-
-#define AP121_CAL_DATA_ADDR 0x1fff1000
-
-static struct gpio_led ap121_leds_gpio[] __initdata = {
- {
- .name = "ap121:green:usb",
- .gpio = AP121_GPIO_LED_USB,
- .active_low = 0,
- },
- {
- .name = "ap121:green:wlan",
- .gpio = AP121_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
- {
- .desc = "jumpstart button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP121_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- },
- {
- .desc = "reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP121_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info ap121_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l1606e",
- }
-};
-
-static struct ath79_spi_platform_data ap121_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-static void __init ap121_setup(void)
-{
- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
- ap121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121_gpio_keys),
- ap121_gpio_keys);
-
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
- ath79_register_wmac(cal_data);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
- ap121_setup);
diff --git a/arch/mips/ath79/mach-ap136.c b/arch/mips/ath79/mach-ap136.c
deleted file mode 100644
index 07eac58..0000000
--- a/arch/mips/ath79/mach-ap136.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Qualcomm Atheros AP136 reference board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "pci.h"
-
-#define AP136_GPIO_LED_STATUS_RED 14
-#define AP136_GPIO_LED_STATUS_GREEN 19
-#define AP136_GPIO_LED_USB 4
-#define AP136_GPIO_LED_WLAN_2G 13
-#define AP136_GPIO_LED_WLAN_5G 12
-#define AP136_GPIO_LED_WPS_RED 15
-#define AP136_GPIO_LED_WPS_GREEN 20
-
-#define AP136_GPIO_BTN_WPS 16
-#define AP136_GPIO_BTN_RFKILL 21
-
-#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
-#define AP136_WMAC_CALDATA_OFFSET 0x1000
-#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
- .name = "qca:green:status",
- .gpio = AP136_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
- .name = "qca:red:status",
- .gpio = AP136_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
- .name = "qca:green:wps",
- .gpio = AP136_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
- .name = "qca:red:wps",
- .gpio = AP136_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
- .name = "qca:red:wlan-2g",
- .gpio = AP136_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "qca:red:usb",
- .gpio = AP136_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP136_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP136_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static struct spi_board_info ap136_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
- }
-};
-
-static struct ath79_spi_platform_data ap136_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data ap136_ath9k_data;
-
-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-{
- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
- dev->dev.platform_data = &ap136_ath9k_data;
-
- return 0;
-}
-
-static void __init ap136_pci_init(u8 *eeprom)
-{
- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
- sizeof(ap136_ath9k_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void ap136_pci_init(u8 *eeprom) {}
-#endif /* CONFIG_PCI */
-
-static void __init ap136_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
- ap136_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap136_gpio_keys),
- ap136_gpio_keys);
- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
- ARRAY_SIZE(ap136_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
- "Atheros AP136-010 reference board",
- ap136_setup);
diff --git a/arch/mips/ath79/mach-ap81.c b/arch/mips/ath79/mach-ap81.c
deleted file mode 100644
index 1c78d49..0000000
--- a/arch/mips/ath79/mach-ap81.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Atheros AP81 board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "machtypes.h"
-#include "dev-wmac.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-
-#define AP81_GPIO_LED_STATUS 1
-#define AP81_GPIO_LED_AOSS 3
-#define AP81_GPIO_LED_WLAN 6
-#define AP81_GPIO_LED_POWER 14
-
-#define AP81_GPIO_BTN_SW4 12
-#define AP81_GPIO_BTN_SW1 21
-
-#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
-
-#define AP81_CAL_DATA_ADDR 0x1fff1000
-
-static struct gpio_led ap81_leds_gpio[] __initdata = {
- {
- .name = "ap81:green:status",
- .gpio = AP81_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "ap81:amber:aoss",
- .gpio = AP81_GPIO_LED_AOSS,
- .active_low = 1,
- }, {
- .name = "ap81:green:wlan",
- .gpio = AP81_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "ap81:green:power",
- .gpio = AP81_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
- {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP81_GPIO_BTN_SW1,
- .active_low = 1,
- } , {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP81_GPIO_BTN_SW4,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info ap81_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
- }
-};
-
-static struct ath79_spi_platform_data ap81_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-static void __init ap81_setup(void)
-{
- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
- ap81_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_keys),
- ap81_gpio_keys);
- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
- ARRAY_SIZE(ap81_spi_info));
- ath79_register_wmac(cal_data);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
- ap81_setup);
diff --git a/arch/mips/ath79/mach-db120.c b/arch/mips/ath79/mach-db120.c
deleted file mode 100644
index 9423f5a..0000000
--- a/arch/mips/ath79/mach-db120.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Atheros DB120 reference board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "pci.h"
-
-#define DB120_GPIO_LED_WLAN_5G 12
-#define DB120_GPIO_LED_WLAN_2G 13
-#define DB120_GPIO_LED_STATUS 14
-#define DB120_GPIO_LED_WPS 15
-
-#define DB120_GPIO_BTN_WPS 16
-
-#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
-#define DB120_WMAC_CALDATA_OFFSET 0x1000
-#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led db120_leds_gpio[] __initdata = {
- {
- .name = "db120:green:status",
- .gpio = DB120_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "db120:green:wps",
- .gpio = DB120_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "db120:green:wlan-5g",
- .gpio = DB120_GPIO_LED_WLAN_5G,
- .active_low = 1,
- },
- {
- .name = "db120:green:wlan-2g",
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button db120_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DB120_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct spi_board_info db120_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "s25sl064a",
- }
-};
-
-static struct ath79_spi_platform_data db120_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data db120_ath9k_data;
-
-static int db120_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &db120_ath9k_data;
- break;
- }
-
- return 0;
-}
-
-static void __init db120_pci_init(u8 *eeprom)
-{
- memcpy(db120_ath9k_data.eeprom_data, eeprom,
- sizeof(db120_ath9k_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void db120_pci_init(u8 *eeprom) {}
-#endif /* CONFIG_PCI */
-
-static void __init db120_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
- db120_setup);
diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c
deleted file mode 100644
index 75fb96c..0000000
--- a/arch/mips/ath79/mach-pb44.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Atheros PB44 reference board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/pcf857x.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "pci.h"
-
-#define PB44_GPIO_I2C_SCL 0
-#define PB44_GPIO_I2C_SDA 1
-
-#define PB44_GPIO_EXP_BASE 16
-#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
-#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
-#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10)
-
-#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
-
-static struct gpiod_lookup_table pb44_i2c_gpiod_table = {
- .dev_id = "i2c-gpio.0",
- .table = {
- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA,
- NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL,
- NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- },
-};
-
-static struct platform_device pb44_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- }
-};
-
-static struct pcf857x_platform_data pb44_pcf857x_data = {
- .gpio_base = PB44_GPIO_EXP_BASE,
-};
-
-static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8575", 0x20),
- .platform_data = &pb44_pcf857x_data,
- },
-};
-
-static struct gpio_led pb44_leds_gpio[] __initdata = {
- {
- .name = "pb44:amber:jump1",
- .gpio = PB44_GPIO_LED_JUMP1,
- .active_low = 1,
- }, {
- .name = "pb44:green:jump2",
- .gpio = PB44_GPIO_LED_JUMP2,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
- {
- .desc = "soft_reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB44_GPIO_SW_RESET,
- .active_low = 1,
- } , {
- .desc = "jumpstart",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB44_GPIO_SW_JUMP,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
- },
-};
-
-static struct ath79_spi_platform_data pb44_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-static void __init pb44_init(void)
-{
- gpiod_add_lookup_table(&pb44_i2c_gpiod_table);
- i2c_register_board_info(0, pb44_i2c_board_info,
- ARRAY_SIZE(pb44_i2c_board_info));
- platform_device_register(&pb44_i2c_gpio_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
- pb44_leds_gpio);
- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pb44_gpio_keys),
- pb44_gpio_keys);
- ath79_register_spi(&pb44_spi_data, pb44_spi_info,
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
- pb44_init);
diff --git a/arch/mips/ath79/mach-ubnt-xm.c b/arch/mips/ath79/mach-ubnt-xm.c
deleted file mode 100644
index 4a3c606..0000000
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Ubiquiti Networks XM (rev 1.0) board support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- *
- * Derived from: mach-pb44.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/irq.h>
-
-#include "machtypes.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "pci.h"
-
-#define UBNT_XM_GPIO_LED_L1 0
-#define UBNT_XM_GPIO_LED_L2 1
-#define UBNT_XM_GPIO_LED_L3 11
-#define UBNT_XM_GPIO_LED_L4 7
-
-#define UBNT_XM_GPIO_BTN_RESET 12
-
-#define UBNT_XM_KEYS_POLL_INTERVAL 20
-#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-
-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
-
-static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
- .name = "ubnt-xm:red:link1",
- .gpio = UBNT_XM_GPIO_LED_L1,
- .active_low = 0,
- }, {
- .name = "ubnt-xm:orange:link2",
- .gpio = UBNT_XM_GPIO_LED_L2,
- .active_low = 0,
- }, {
- .name = "ubnt-xm:green:link3",
- .gpio = UBNT_XM_GPIO_LED_L3,
- .active_low = 0,
- }, {
- .name = "ubnt-xm:green:link4",
- .gpio = UBNT_XM_GPIO_LED_L4,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UBNT_XM_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct spi_board_info ubnt_xm_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "mx25l6405d",
- }
-};
-
-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
- .bus_num = 0,
- .num_chipselect = 1,
-};
-
-#ifdef CONFIG_PCI
-static struct ath9k_platform_data ubnt_xm_eeprom_data;
-
-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &ubnt_xm_eeprom_data;
- break;
- }
-
- return 0;
-}
-
-static void __init ubnt_xm_pci_init(void)
-{
- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
- sizeof(ubnt_xm_eeprom_data.eeprom_data));
-
- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void ubnt_xm_pci_init(void) {}
-#endif /* CONFIG_PCI */
-
-static void __init ubnt_xm_init(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
- ARRAY_SIZE(ubnt_xm_spi_info));
-
- ubnt_xm_pci_init();
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_XM,
- "UBNT-XM",
- "Ubiquiti Networks XM (rev 1.0) board",
- ubnt_xm_init);
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
deleted file mode 100644
index a13db3d..0000000
--- a/arch/mips/ath79/machtypes.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X machine type definitions
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_MACHTYPE_H
-#define _ATH79_MACHTYPE_H
-
-#include <asm/mips_machine.h>
-
-enum ath79_mach_type {
- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
- ATH79_MACH_AP81, /* Atheros AP81 reference board */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
-};
-
-#endif /* _ATH79_MACHTYPE_H */
diff --git a/arch/mips/ath79/pci.c b/arch/mips/ath79/pci.c
deleted file mode 100644
index b816cb4..0000000
--- a/arch/mips/ath79/pci.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Atheros AR71XX/AR724X specific PCI setup code
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include "pci.h"
-
-static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
-static const struct ath79_pci_irq *ath79_pci_irq_map;
-static unsigned ath79_pci_nr_irqs;
-
-static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
- {
- .slot = 17,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }, {
- .slot = 18,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 19,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }
-};
-
-static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
- {
- .slot = 0,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }
-};
-
-static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
- {
- .bus = 0,
- .slot = 0,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- },
- {
- .bus = 1,
- .slot = 0,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- },
-};
-
-int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
-{
- int irq = -1;
- int i;
-
- if (ath79_pci_nr_irqs == 0 ||
- ath79_pci_irq_map == NULL) {
- if (soc_is_ar71xx()) {
- ath79_pci_irq_map = ar71xx_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
- } else if (soc_is_ar724x() ||
- soc_is_ar9342() ||
- soc_is_ar9344()) {
- ath79_pci_irq_map = ar724x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
- } else {
- pr_crit("pci %s: invalid irq map\n",
- pci_name((struct pci_dev *) dev));
- return irq;
- }
- }
-
- for (i = 0; i < ath79_pci_nr_irqs; i++) {
- const struct ath79_pci_irq *entry;
-
- entry = &ath79_pci_irq_map[i];
- if (entry->bus == dev->bus->number &&
- entry->slot == slot &&
- entry->pin == pin) {
- irq = entry->irq;
- break;
- }
- }
-
- if (irq < 0)
- pr_crit("pci %s: no irq found for pin %u\n",
- pci_name((struct pci_dev *) dev), pin);
- else
- pr_info("pci %s: using irq %d for pin %u\n",
- pci_name((struct pci_dev *) dev), irq, pin);
-
- return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- if (ath79_pci_plat_dev_init)
- return ath79_pci_plat_dev_init(dev);
-
- return 0;
-}
-
-void __init ath79_pci_set_irq_map(unsigned nr_irqs,
- const struct ath79_pci_irq *map)
-{
- ath79_pci_nr_irqs = nr_irqs;
- ath79_pci_irq_map = map;
-}
-
-void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
-{
- ath79_pci_plat_dev_init = func;
-}
-
-static struct platform_device *
-ath79_register_pci_ar71xx(void)
-{
- struct platform_device *pdev;
- struct resource res[4];
-
- memset(res, 0, sizeof(res));
-
- res[0].name = "cfg_base";
- res[0].flags = IORESOURCE_MEM;
- res[0].start = AR71XX_PCI_CFG_BASE;
- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
-
- res[1].flags = IORESOURCE_IRQ;
- res[1].start = ATH79_CPU_IRQ(2);
- res[1].end = ATH79_CPU_IRQ(2);
-
- res[2].name = "io_base";
- res[2].flags = IORESOURCE_IO;
- res[2].start = 0;
- res[2].end = 0;
-
- res[3].name = "mem_base";
- res[3].flags = IORESOURCE_MEM;
- res[3].start = AR71XX_PCI_MEM_BASE;
- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
-
- pdev = platform_device_register_simple("ar71xx-pci", -1,
- res, ARRAY_SIZE(res));
- return pdev;
-}
-
-static struct platform_device *
-ath79_register_pci_ar724x(int id,
- unsigned long cfg_base,
- unsigned long ctrl_base,
- unsigned long crp_base,
- unsigned long mem_base,
- unsigned long mem_size,
- unsigned long io_base,
- int irq)
-{
- struct platform_device *pdev;
- struct resource res[6];
-
- memset(res, 0, sizeof(res));
-
- res[0].name = "cfg_base";
- res[0].flags = IORESOURCE_MEM;
- res[0].start = cfg_base;
- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
-
- res[1].name = "ctrl_base";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = ctrl_base;
- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
-
- res[2].flags = IORESOURCE_IRQ;
- res[2].start = irq;
- res[2].end = irq;
-
- res[3].name = "mem_base";
- res[3].flags = IORESOURCE_MEM;
- res[3].start = mem_base;
- res[3].end = mem_base + mem_size - 1;
-
- res[4].name = "io_base";
- res[4].flags = IORESOURCE_IO;
- res[4].start = io_base;
- res[4].end = io_base;
-
- res[5].name = "crp_base";
- res[5].flags = IORESOURCE_MEM;
- res[5].start = crp_base;
- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
-
- pdev = platform_device_register_simple("ar724x-pci", id,
- res, ARRAY_SIZE(res));
- return pdev;
-}
-
-int __init ath79_register_pci(void)
-{
- struct platform_device *pdev = NULL;
-
- if (soc_is_ar71xx()) {
- pdev = ath79_register_pci_ar71xx();
- } else if (soc_is_ar724x()) {
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
- AR724X_PCI_CRP_BASE,
- AR724X_PCI_MEM_BASE,
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_CPU_IRQ(2));
- } else if (soc_is_ar9342() ||
- soc_is_ar9344()) {
- u32 bootstrap;
-
- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
- return -ENODEV;
-
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
- AR724X_PCI_CTRL_BASE,
- AR724X_PCI_CRP_BASE,
- AR724X_PCI_MEM_BASE,
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
- } else if (soc_is_qca9558()) {
- pdev = ath79_register_pci_ar724x(0,
- QCA955X_PCI_CFG_BASE0,
- QCA955X_PCI_CTRL_BASE0,
- QCA955X_PCI_CRP_BASE0,
- QCA955X_PCI_MEM_BASE0,
- QCA955X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-
- pdev = ath79_register_pci_ar724x(1,
- QCA955X_PCI_CFG_BASE1,
- QCA955X_PCI_CTRL_BASE1,
- QCA955X_PCI_CRP_BASE1,
- QCA955X_PCI_MEM_BASE1,
- QCA955X_PCI_MEM_SIZE,
- 1,
- ATH79_IP3_IRQ(2));
- } else {
- /* No PCI support */
- return -ENODEV;
- }
-
- if (!pdev)
- pr_err("unable to register PCI controller device\n");
-
- return pdev ? 0 : -ENODEV;
-}
diff --git a/arch/mips/ath79/pci.h b/arch/mips/ath79/pci.h
deleted file mode 100644
index 1d00a38..0000000
--- a/arch/mips/ath79/pci.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Atheros AR71XX/AR724X PCI support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_PCI_H
-#define _ATH79_PCI_H
-
-struct ath79_pci_irq {
- int bus;
- u8 slot;
- u8 pin;
- int irq;
-};
-
-#ifdef CONFIG_PCI
-void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
-void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
-int ath79_register_pci(void);
-#else
-static inline void
-ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
-static inline void
-ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
-static inline int ath79_register_pci(void) { return 0; }
-#endif
-
-#endif /* _ATH79_PCI_H */
diff --git a/arch/mips/ath79/prom.c b/arch/mips/ath79/prom.c
index 597899a..25724b4 100644
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Atheros AR71XX/AR724X/AR913X specific prom routines
*
* Copyright (C) 2015 Laurent Fasnacht <l@libres.ch>
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/kernel.h>
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 4c7a93f..ea385a8 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Atheros AR71XX/AR724X/AR913X specific setup
*
@@ -6,19 +7,17 @@
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of_fdt.h>
+#include <linux/irqchip.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
@@ -31,8 +30,6 @@
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
-#include "dev-common.h"
-#include "machtypes.h"
#define ATH79_SYS_TYPE_LEN 64
@@ -156,7 +153,7 @@
case REV_ID_MAJOR_QCA9533_V2:
ver = 2;
ath79_soc_rev = 2;
- /* drop through */
+ /* fall through */
case REV_ID_MAJOR_QCA9533:
ath79_soc = ATH79_SOC_QCA9533;
@@ -211,12 +208,6 @@
return ath79_sys_type;
}
-int get_c0_perfcount_int(void)
-{
- return ATH79_MISC_IRQ(5);
-}
-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
unsigned int get_c0_compare_int(void)
{
return CP0_LEGACY_COMPARE_IRQ;
@@ -235,25 +226,21 @@
else if (fw_passed_dtb)
__dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
- AR71XX_RESET_SIZE);
- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
- AR71XX_PLL_SIZE);
- ath79_detect_sys_type();
- ath79_ddr_ctrl_init();
+ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
+ AR71XX_RESET_SIZE);
+ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
+ AR71XX_PLL_SIZE);
+ ath79_detect_sys_type();
+ ath79_ddr_ctrl_init();
- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
- /* OF machines should use the reset driver */
- _machine_restart = ath79_restart;
- }
-
+ _machine_restart = ath79_restart;
_machine_halt = ath79_halt;
pm_power_off = ath79_halt;
}
-static void __init ath79_of_plat_time_init(void)
+void __init plat_time_init(void)
{
struct device_node *np;
struct clk *clk;
@@ -283,61 +270,12 @@
clk_put(clk);
}
-void __init plat_time_init(void)
+void __init arch_init_irq(void)
{
- unsigned long cpu_clk_rate;
- unsigned long ahb_clk_rate;
- unsigned long ddr_clk_rate;
- unsigned long ref_clk_rate;
-
- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
- ath79_of_plat_time_init();
- return;
- }
-
- ath79_clocks_init();
-
- cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
- ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
- ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
- ref_clk_rate = ath79_get_sys_clk_rate("ref");
-
- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
-
- mips_hpt_frequency = cpu_clk_rate / 2;
+ irqchip_init();
}
-static int __init ath79_setup(void)
-{
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
- return 0;
-
- ath79_gpio_init();
- ath79_register_uart();
- ath79_register_wdt();
-
- mips_machine_setup();
-
- return 0;
-}
-
-arch_initcall(ath79_setup);
-
void __init device_tree_init(void)
{
unflatten_and_copy_device_tree();
}
-
-MIPS_MACHINE(ATH79_MACH_GENERIC,
- "Generic",
- "Generic AR71XX/AR724X/AR913X based board",
- NULL);
-
-MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
- "DTB",
- "Generic AR71XX/AR724X/AR913X based board (DT)",
- NULL);