Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a68b341..f60bc29 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
@@ -46,6 +47,7 @@
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ select GPIO_REG
select PXA27x
config MACH_ZYLONITE
@@ -125,7 +127,7 @@
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
select IWMMXT
- select MIGHT_HAVE_PCI
+ select HAVE_PCI
select NEED_MACH_IO_H if PCI
select PXA25x
select PXA27x
@@ -453,24 +455,6 @@
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
-config MACH_RAUMFELD_RC
- bool "Raumfeld Controller"
- select CPU_PXA300
- select POWER_SUPPLY
- select PXA3xx
-
-config MACH_RAUMFELD_CONNECTOR
- bool "Raumfeld Connector"
- select CPU_PXA300
- select POWER_SUPPLY
- select PXA3xx
-
-config MACH_RAUMFELD_SPEAKER
- bool "Raumfeld Speaker"
- select CPU_PXA300
- select POWER_SUPPLY
- select PXA3xx
-
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_PARAM
@@ -551,7 +535,6 @@
config TOSA_USE_EXT_KEYCODES
bool "Tosa keyboard: use extended keycodes"
depends on MACH_TOSA
- default n
help
Say Y here to enable the tosa keyboard driver to generate extended
(>= 127) keycodes. Be aware, that they can't be correctly interpreted
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0a8e961..f707289 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -86,9 +86,6 @@
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
-obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot
index 2c1ae92..bb6e353 100644
--- a/arch/arm/mach-pxa/Makefile.boot
+++ b/arch/arm/mach-pxa/Makefile.boot
@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
zreladdr-y += 0xa0008000
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 50e18ed..cac0bb0 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -347,8 +347,17 @@
{
int ret;
- /* before anything else, we request notification for any fb
- * creation events */
+ /*
+ * Before anything else, we request notification for any fb
+ * creation events.
+ *
+ * FIXME: This is terrible and needs to be nuked. The notifier is used
+ * to get at the fb base address from the boot splash fb driver, which
+ * is then passed to metronomefb. Instaed of metronomfb or this board
+ * support file here figuring this out on their own.
+ *
+ * See also the #ifdef in fbmem.c.
+ */
fb_register_client(&am200_fb_notif);
pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index af46d21..2614024 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/balloon3.c
*
@@ -7,10 +8,6 @@
* Created: June, 2006
* Copyright: Toby Churchill Ltd
* Derived from mainstone.c, by Nico Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/export.h>
@@ -25,18 +22,17 @@
#include <linux/ioport.h>
#include <linux/ucb1400.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
#include <linux/types.h>
#include <linux/platform_data/pcf857x.h>
#include <linux/platform_data/i2c-pxa.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/platnand.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/max1586.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -291,9 +287,6 @@
static struct pxamci_platform_data balloon3_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
.detect_delay_ms = 200,
};
@@ -571,9 +564,9 @@
* NAND
******************************************************************************/
#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void balloon3_nand_cmd_ctl(struct nand_chip *this, int cmd,
+ unsigned int ctrl)
{
- struct nand_chip *this = mtd_to_nand(mtd);
uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
if (ctrl & NAND_CTRL_CHANGE) {
@@ -597,10 +590,10 @@
}
if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
+ writeb(cmd, this->legacy.IO_ADDR_W);
}
-static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+static void balloon3_nand_select_chip(struct nand_chip *this, int chip)
{
if (chip < 0 || chip > 3)
return;
@@ -616,7 +609,7 @@
BALLOON3_NAND_CONTROL_REG);
}
-static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+static int balloon3_nand_dev_ready(struct nand_chip *this)
{
return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
}
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 1c3cbfc..7712327 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/capc7117.c
*
@@ -13,10 +14,6 @@
* 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
* Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
* rework for upstream merge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/irq.h>
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index fa8e7dd..ea1e857 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/cm-x255.c
*
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
@@ -98,7 +95,7 @@
};
#if defined(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
.num_chipselect = 1,
};
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index be4a661..9baad11 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,17 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/cm-x270.c
*
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/delay.h>
#include <linux/platform_data/rtc-v3020.h>
@@ -288,14 +286,23 @@
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static struct pxamci_platform_data cmx270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = GPIO83_MMC_IRQ,
- .gpio_card_ro = -1,
- .gpio_power = GPIO105_MMC_POWER,
- .gpio_power_invert = 1,
+};
+
+static struct gpiod_lookup_table cmx270_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 83 */
+ GPIO_LOOKUP("gpio-pxa", GPIO83_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
+ /* Power on GPIO 105 */
+ GPIO_LOOKUP("gpio-pxa", GPIO105_MMC_POWER,
+ "power", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static void __init cmx270_init_mmc(void)
{
+ gpiod_add_lookup_table(&cmx270_mci_gpio_table);
pxa_set_mci_info(&cmx270_mci_platform_data);
}
#else
@@ -303,7 +310,7 @@
#endif
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master cm_x270_spi_info = {
+static struct pxa2xx_spi_controller cm_x270_spi_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 3221ae1..f1c61c6 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/cm-x2xx-pci.c
*
@@ -7,10 +8,6 @@
*
* Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 7202022..ff976d1 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/cm-x2xx.c
*
* Copyright (C) 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index c5c0ab8..425855f 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/cm-x300.c
*
@@ -7,10 +8,6 @@
*
* Mike Rapoport <mike@compulab.co.il>
* Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#define pr_fmt(fmt) "%s: " fmt, __func__
@@ -459,9 +456,17 @@
static struct pxamci_platform_data cm_x300_mci_platform_data = {
.detect_delay_ms = 200,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = GPIO82_MMC_IRQ,
- .gpio_card_ro = GPIO85_MMC_WP,
- .gpio_power = -1,
+};
+
+static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 82 */
+ GPIO_LOOKUP("gpio-pxa", GPIO82_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 85 */
+ GPIO_LOOKUP("gpio-pxa", GPIO85_MMC_WP, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
@@ -482,13 +487,11 @@
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = cm_x300_mci2_init,
.exit = cm_x300_mci2_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void __init cm_x300_init_mmc(void)
{
+ gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
pxa_set_mci_info(&cm_x300_mci_platform_data);
pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
}
@@ -558,7 +561,7 @@
.exit = cm_x300_u2d_exit,
};
-static void cm_x300_init_u2d(void)
+static void __init cm_x300_init_u2d(void)
{
pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
}
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 10e2278..b9c173e 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -1,20 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/colibri-evalboard.c
*
* Support for Toradex Colibri Evaluation Carrier Board
* Daniel Mack <daniel@caiaq.de>
* Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
@@ -37,22 +34,44 @@
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data colibri_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = -1,
- .gpio_card_ro = -1,
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init colibri_mmc_init(void)
{
if (machine_is_colibri()) /* PXA270 Colibri */
- colibri_mci_platform_data.gpio_card_detect =
- GPIO0_COLIBRI_PXA270_SD_DETECT;
+ gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table);
if (machine_is_colibri300()) /* PXA300 Colibri */
- colibri_mci_platform_data.gpio_card_detect =
- GPIO13_COLIBRI_PXA300_SD_DETECT;
+ gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table);
else /* PXA320 Colibri */
- colibri_mci_platform_data.gpio_card_detect =
- GPIO28_COLIBRI_PXA320_SD_DETECT;
+ gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table);
pxa_set_mci_info(&colibri_mci_platform_data);
}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 3ccf2a9..dbad2f1 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/income.c
*
@@ -6,15 +7,11 @@
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
* Pavel Revak <palo@bielyvlk.sk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/leds.h>
@@ -51,14 +48,25 @@
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data income_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = -1,
- .gpio_card_detect = GPIO0_INCOME_SD_DETECT,
- .gpio_card_ro = GPIO0_INCOME_SD_RO,
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table income_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 0 */
+ GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 1 */
+ GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_RO,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init income_mmc_init(void)
{
+ gpiod_add_lookup_table(&income_mci_gpio_table);
pxa_set_mci_info(&income_mci_platform_data);
}
#else
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index e68acdd..2f2cd2a 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/colibri-pxa270.c
*
* Support for Toradex PXA270 based Colibri module
* Daniel Mack <daniel@caiaq.de>
* Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -24,7 +21,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach-types.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <mach/audio.h>
#include "colibri.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 6a5558d..82052df 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-pxa/colibri-pxa300.c
*
@@ -5,10 +6,6 @@
*
* Daniel Mack <daniel@caiaq.de>
* Matthias Meier <matthias.j.meier@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -18,7 +15,7 @@
#include <linux/interrupt.h>
#include <asm/mach-types.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 17067a3..eba917d 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-pxa/colibri-pxa320.c
*
@@ -5,10 +6,6 @@
*
* Daniel Mack <daniel@caiaq.de>
* Matthias Meier <matthias.j.meier@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -19,7 +16,7 @@
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index e31a591..3cead80 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-pxa/colibri-pxa3xx.c
*
* Common functions for all Toradex PXA3xx modules
*
* Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -17,7 +14,7 @@
#include <linux/etherdevice.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/system_info.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 9a5a35e..f2d7328 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for Sharp SL-C7xx PDAs
* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
@@ -5,11 +6,6 @@
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches/lubbock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
@@ -24,6 +20,7 @@
#include <linux/mtd/physmap.h>
#include <linux/pm.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/backlight.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -493,11 +490,23 @@
static struct pxamci_platform_data corgi_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = CORGI_GPIO_nSD_DETECT,
- .gpio_card_ro = CORGI_GPIO_nSD_WP,
- .gpio_power = CORGI_GPIO_SD_PWR,
};
+static struct gpiod_lookup_table corgi_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 9 */
+ GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 7 */
+ GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ /* Power on GPIO 33 */
+ GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
/*
* Irda
@@ -517,7 +526,7 @@
};
#if IS_ENABLED(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_master corgi_spi_info = {
+static struct pxa2xx_spi_controller corgi_spi_info = {
.num_chipselect = 3,
};
@@ -731,6 +740,7 @@
corgi_init_spi();
pxa_set_udc_info(&udc_info);
+ gpiod_add_lookup_table(&corgi_mci_gpio_table);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index c71c483..092dcb9 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Battery and Power Management code for the Sharp SL-C7xx
*
* Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 271aeda..98fcdc6 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -1,17 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for Cogent CSB726
*
* Copyright (c) 2008 Dmitry Eremin-Solenikov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -129,9 +125,19 @@
.detect_delay_ms = 500,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
/* FIXME setpower */
- .gpio_card_detect = CSB726_GPIO_MMC_DETECT,
- .gpio_card_ro = CSB726_GPIO_MMC_RO,
- .gpio_power = -1,
+};
+
+static struct gpiod_lookup_table csb726_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 100 */
+ GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 101 */
+ GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct pxaohci_platform_data csb726_ohci_platform_data = {
@@ -264,6 +270,7 @@
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
+ gpiod_add_lookup_table(&csb726_mci_gpio_table);
pxa_set_mci_info(&csb726_mci);
pxa_set_ohci_info(&csb726_ohci_platform_data);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h
index f1f2a78..30d7cf9 100644
--- a/arch/arm/mach-pxa/csb726.h
+++ b/arch/arm/mach-pxa/csb726.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Support for Cogent CSB726
*
* Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef CSB726_H
#define CSB726_H
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a24783a..524d609 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1065,7 +1065,7 @@
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
-void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info)
{
struct platform_device *pd;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 29be04c..d8681a3 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for CompuLab EM-X270 platform
*
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/irq.h>
@@ -15,12 +12,12 @@
#include <linux/dm9000.h>
#include <linux/platform_data/rtc-v3020.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
#include <linux/mtd/physmap.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/mfd/da903x.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -285,11 +282,10 @@
}
/* hardware specific access to control-lines */
-static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
+static void em_x270_nand_cmd_ctl(struct nand_chip *this, int dat,
unsigned int ctrl)
{
- struct nand_chip *this = mtd_to_nand(mtd);
- unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+ unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W;
dsb();
@@ -309,15 +305,15 @@
}
dsb();
- this->IO_ADDR_W = (void __iomem *)nandaddr;
+ this->legacy.IO_ADDR_W = (void __iomem *)nandaddr;
if (dat != NAND_CMD_NONE)
- writel(dat, this->IO_ADDR_W);
+ writel(dat, this->legacy.IO_ADDR_W);
dsb();
}
/* read device ready pin */
-static int em_x270_nand_device_ready(struct mtd_info *mtd)
+static int em_x270_nand_device_ready(struct nand_chip *this)
{
dsb();
@@ -548,6 +544,15 @@
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static struct regulator *em_x270_sdio_ldo;
+static struct gpiod_lookup_table em_x270_mci_wp_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Write protect on GPIO 95 */
+ GPIO_LOOKUP("gpio-pxa", GPIO95_MMC_WP, "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
@@ -569,15 +574,7 @@
goto err_irq;
}
- if (machine_is_em_x270()) {
- err = gpio_request(GPIO95_MMC_WP, "MMC WP");
- if (err) {
- dev_err(dev, "can't request MMC write protect: %d\n",
- err);
- goto err_gpio_wp;
- }
- gpio_direction_input(GPIO95_MMC_WP);
- } else {
+ if (!machine_is_em_x270()) {
err = gpio_request(GPIO38_SD_PWEN, "sdio power");
if (err) {
dev_err(dev, "can't request MMC power control : %d\n",
@@ -617,17 +614,10 @@
free_irq(gpio_to_irq(mmc_cd), data);
regulator_put(em_x270_sdio_ldo);
- if (machine_is_em_x270())
- gpio_free(GPIO95_MMC_WP);
- else
+ if (!machine_is_em_x270())
gpio_free(GPIO38_SD_PWEN);
}
-static int em_x270_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO95_MMC_WP);
-}
-
static struct pxamci_platform_data em_x270_mci_platform_data = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
@@ -637,15 +627,12 @@
.init = em_x270_mci_init,
.setpower = em_x270_mci_setpower,
.exit = em_x270_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void __init em_x270_init_mmc(void)
{
if (machine_is_em_x270())
- em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
+ gpiod_add_lookup_table(&em_x270_mci_wp_gpio_table);
pxa_set_mci_info(&em_x270_mci_platform_data);
}
@@ -699,7 +686,7 @@
#endif
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master em_x270_spi_info = {
+static struct pxa2xx_spi_controller em_x270_spi_info = {
.num_chipselect = 1,
};
@@ -713,7 +700,7 @@
.model = TDO35S,
};
-static struct pxa2xx_spi_master em_x270_spi_2_info = {
+static struct pxa2xx_spi_controller em_x270_spi_2_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
@@ -986,8 +973,6 @@
.supply_name = "camera_vdd",
.input_supply = "vcc cam",
.microvolts = 2800000,
- .gpio = -1,
- .enable_high = 0,
.init_data = &camera_dummy_initdata,
};
diff --git a/arch/arm/mach-pxa/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
index de292b2..572d573 100644
--- a/arch/arm/mach-pxa/eseries-irq.h
+++ b/arch/arm/mach-pxa/eseries-irq.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* eseries-irq.h
*
* Copyright (C) Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 2c90b58..ec10851 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -1,14 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* ezx.c - Common code for the EZX platform.
*
* Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
* 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
* 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
@@ -21,6 +17,7 @@
#include <linux/regulator/fixed.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio_keys.h>
#include <linux/leds-lp3944.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -698,31 +695,38 @@
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
/* camera */
-static struct regulator_consumer_supply camera_dummy_supplies[] = {
+static struct regulator_consumer_supply camera_regulator_supplies[] = {
REGULATOR_SUPPLY("vdd", "0-005d"),
};
-static struct regulator_init_data camera_dummy_initdata = {
- .consumer_supplies = camera_dummy_supplies,
- .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+static struct regulator_init_data camera_regulator_initdata = {
+ .consumer_supplies = camera_regulator_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
-static struct fixed_voltage_config camera_dummy_config = {
+static struct fixed_voltage_config camera_regulator_config = {
.supply_name = "camera_vdd",
.microvolts = 2800000,
- .gpio = GPIO50_nCAM_EN,
- .enable_high = 0,
- .init_data = &camera_dummy_initdata,
+ .init_data = &camera_regulator_initdata,
};
-static struct platform_device camera_supply_dummy_device = {
+static struct platform_device camera_supply_regulator_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
- .platform_data = &camera_dummy_config,
+ .platform_data = &camera_regulator_config,
+ },
+};
+
+static struct gpiod_lookup_table camera_supply_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.1",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
+ NULL, GPIO_ACTIVE_LOW),
+ { },
},
};
#endif
@@ -800,7 +804,7 @@
static struct platform_device *a780_devices[] __initdata = {
&a780_gpio_keys,
- &camera_supply_dummy_device,
+ &camera_supply_regulator_device,
};
static void __init a780_init(void)
@@ -823,6 +827,7 @@
if (a780_camera_init() == 0)
pxa_set_camera_info(&a780_pxacamera_platform_data);
+ gpiod_add_lookup_table(&camera_supply_gpiod_table);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
@@ -1098,7 +1103,7 @@
static struct platform_device *a910_devices[] __initdata = {
&a910_gpio_keys,
- &camera_supply_dummy_device,
+ &camera_supply_regulator_device,
};
static void __init a910_init(void)
@@ -1121,6 +1126,7 @@
if (a910_camera_init() == 0)
pxa_set_camera_info(&a910_pxacamera_platform_data);
+ gpiod_add_lookup_table(&camera_supply_gpiod_table);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a910_devices));
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index cb73a97..ab7cdff 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/generic.c
*
@@ -7,10 +8,6 @@
*
* Code common to all PXA machines.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Since this file should be linked before any other machine specific file,
* the __initcall() here will be executed first. This serves as default
* initialization stuff for PXA machines which can be overridden later if
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 75e3f61..3b7873f 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/mach-pxa/generic.h
*
* Author: Nicolas Pitre
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/reboot.h>
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c5b2fb..4b4589c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/gumstix.c
*
@@ -7,10 +8,6 @@
* Created: Feb 14, 2008
* Copyright: Craig Hughes
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Implemented based on lubbock.c by Nicolas Pitre and code from Craig
* Hughes
*/
@@ -33,7 +30,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -90,9 +87,6 @@
#ifdef CONFIG_MMC_PXA
static struct pxamci_platform_data gumstix_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void __init gumstix_mmc_init(void)
diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h
index 825f2d1..470250c 100644
--- a/arch/arm/mach-pxa/gumstix.h
+++ b/arch/arm/mach-pxa/gumstix.h
@@ -1,9 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/gumstix.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index be2a9c3..ece1e71 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
*
@@ -6,11 +7,6 @@
* Copyright 2004-2005 Phil Blundell <pb@handhelds.org>
* Copyright 2007-2008 Anton Vorontsov <cbouatmailru@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h
index 252461f..58687e9 100644
--- a/arch/arm/mach-pxa/h5000.h
+++ b/arch/arm/mach-pxa/h5000.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Hardware definitions for HP iPAQ h5xxx Handheld Computers
*
* Copyright(20)02 Hewlett-Packard Company.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 70e9c06..469ffee 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/himalaya.c
*
@@ -6,10 +7,6 @@
* Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
*
* Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index b79b757..311268d 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for HP iPAQ hx4700 PDAs.
*
@@ -7,11 +8,6 @@
* Copyright (c) 2004 Hewlett-Packard Company.
* Copyright (c) 2005 SDG Systems, LLC
* Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
@@ -19,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/fb.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
@@ -629,7 +626,7 @@
},
};
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
@@ -702,9 +699,7 @@
.consumer_supplies = bq24022_consumers,
};
-static struct gpio bq24022_gpios[] = {
- { GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
+static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
@@ -714,12 +709,10 @@
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
- .enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
- .enable_high = 0,
.enabled_at_boot = 0,
- .gpios = bq24022_gpios,
- .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+ .gflags = bq24022_gpiod_gflags,
+ .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
@@ -736,6 +729,17 @@
},
};
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+ .dev_id = "gpio-regulator",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
+ NULL, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
+ "enable", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/*
* StrataFlash
*/
@@ -878,6 +882,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ gpiod_add_lookup_table(&bq24022_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index cbaf4f6..865b103 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/icontrol.c
*
@@ -7,10 +8,6 @@
* Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
*
* 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/irq.h>
@@ -115,12 +112,12 @@
}
};
-static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = {
.num_chipselect = 2,
.enable_dma = 1
};
-static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = {
.num_chipselect = 2,
.enable_dma = 1
};
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 88e0068..fb0850a 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/idp.c
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
*
* 2001-09-13: Cliff Brake <cbrake@accelent.com>
@@ -13,7 +10,6 @@
* 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
* <http://www.vibren.com> <http://bec-systems.com>
* Updated for 2.6 kernel
- *
*/
#include <linux/init.h>
@@ -160,9 +156,6 @@
static struct pxamci_platform_data idp_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void __init idp_init(void)
diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h
index 7182ff9..a89e672 100644
--- a/arch/arm/mach-pxa/idp.h
+++ b/arch/arm/mach-pxa/idp.h
@@ -1,10 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/idp.h
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
*
* 2001-09-13: Cliff Brake <cbrake@accelent.com>
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 1b08259..04f3639 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/include/asm-arm/arch-pxa/balloon3.h
*
@@ -5,10 +6,6 @@
* Created: Oct, 2005
* Copyright: Toby Churchill Ltd
* Cribbed from mainstone.c, by Nicholas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef ASM_ARCH_BALLOON3_H
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index c030d95..b565ca7 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Hardware specific definitions for SL-C7xx series of PDAs
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef __ASM_ARCH_CORGI_H
#define __ASM_ARCH_CORGI_H 1
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 20026bd..79f9842 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/dma.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
index f3e5509..5c64560 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* eseries-gpio.h
*
* Copyright (C) Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
/* e-series power button */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 5506412..ee7eab1 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/hardware.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 0e1bb46..0c30e6d 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIO and IRQ definitions for HP iPAQ hx4700
*
* Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _HX4700_H_
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7e3ea35..22bf536 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/irqs.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_MACH_IRQS_H
#define __ASM_MACH_IRQS_H
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 1eecf79..a3af4a2 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/lubbock.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <mach/irqs.h>
@@ -50,7 +47,3 @@
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index c48b54d..7d3af56 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIO and IRQ definitions for HTC Magician PDA phones
*
* Copyright (c) 2007 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _MAGICIAN_H_
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index e82a7d3..1698f2f 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/mainstone.h
*
* Author: Nicolas Pitre
* Created: Nov 14, 2002
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef ASM_ARCH_MAINSTONE_H
@@ -119,6 +116,10 @@
#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
+#define MST_PCMCIA_INPUTS \
+ (MST_PCMCIA_nIRQ | MST_PCMCIA_nSPKR_BVD2 | MST_PCMCIA_nSTSCHG_BVD1 | \
+ MST_PCMCIA_nVS2 | MST_PCMCIA_nVS1 | MST_PCMCIA_nCD)
+
/* board specific IRQs */
#define MAINSTONE_NR_IRQS IRQ_BOARD_START
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 271e249..dbb961f 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/mfp.h
*
@@ -7,10 +8,6 @@
*
* 2007-8-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MFP_H
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 9bf4ea6..4b31bef 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* MTD primitives for XIP support. Architecture specific functions
*
@@ -6,10 +7,6 @@
* Author: Nicolas Pitre
* Created: Nov 2, 2004
* Copyright: (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ARCH_PXA_MTD_XIP_H__
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index b184f29..99a6d8b 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Palm LifeDrive Handheld Computer
*
* Authors: Alex Osborne <ato@meshy.org>
* Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_PALMLD_H_
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 81c727b..9257a02 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/include/asm-arm/arch-pxa/palmtc-gpio.h
*
@@ -6,11 +7,6 @@
* Authors: Alex Osborne <bobofdoom@gmail.com>
* Marek Vasut <marek.vasut@gmail.com>
* Holger Bocklet <bitz.email@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_PALMTC_H_
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 92bc1f0..ec88abf 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Palm T|X Handheld Computer
*
@@ -6,11 +7,6 @@
* Authors: Marek Vasut <marek.vasut@gmail.com>
* Cristiano P. <cristianop@users.sourceforge.net>
* Jan Herman <2hp@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_PALMTX_H_
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
+++ /dev/null
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 5537d56..fa121e1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
*
@@ -5,10 +6,6 @@
*
* Author: Nicolas Pitre
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __PXA2XX_REGS_H
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 888bf7a..070f6c7 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
*
* PXA3xx specific register definitions
*
* Copyright (C) 2007 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_PXA3XX_REGS_H
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
index b802f28..9b2453a 100644
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Static memory controller register definitions for PXA CPUs
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __SMEMC_REGS_H
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 25c9f62..04828d8 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Hardware specific definitions for SL-Cx000 series of PDAs
*
@@ -5,11 +6,6 @@
* Copyright (c) 2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef __ASM_ARCH_SPITZ_H
#define __ASM_ARCH_SPITZ_H 1
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 0497d95..a499ed1 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Hardware specific definitions for Sharp SL-C6000x series of PDAs
*
* Copyright (c) 2005 Dirk Opfer
*
* Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _ASM_ARCH_TOSA_H_
#define _ASM_ARCH_TOSA_H_ 1
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 8c27757..c363060 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/uncompress.h
*
* Author: Nicolas Pitre
* Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/serial_reg.h>
diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h
index 7bfa3dd..0cd094d 100644
--- a/arch/arm/mach-pxa/include/mach/vpac270.h
+++ b/arch/arm/mach-pxa/include/mach/vpac270.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Voipac PXA270
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_VPAC270_H_
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 7b0f71e..a78b2e2 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/z2.h
*
* Author: Ken McGuire
* Created: Feb 6, 2009
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef ASM_ARCH_ZIPIT2_H
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 4e8c211..74efc3a 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/irq.c
*
@@ -6,10 +7,6 @@
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9e132b3..793f613 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/littleton.c
*
@@ -9,10 +10,6 @@
*
* 2007-11-22 modified to align with latest kernel
* eric miao <eric.miao@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -20,7 +17,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/smc91x.h>
@@ -51,8 +48,6 @@
#include "generic.h"
-#define GPIO_MMC1_CARD_DETECT mfp_to_gpio(MFP_PIN_GPIO15)
-
/* Littleton MFP configurations */
static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* LCD */
@@ -184,7 +179,7 @@
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
-static void littleton_init_lcd(void)
+static void __init littleton_init_lcd(void)
{
pxa_set_fb_info(NULL, &littleton_lcd_info);
}
@@ -193,7 +188,7 @@
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master littleton_spi_info = {
+static struct pxa2xx_spi_controller littleton_spi_info = {
.num_chipselect = 1,
};
@@ -278,13 +273,21 @@
static struct pxamci_platform_data littleton_mci_platform_data = {
.detect_delay_ms = 200,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_MMC1_CARD_DETECT,
- .gpio_card_ro = -1,
- .gpio_power = -1,
+};
+
+static struct gpiod_lookup_table littleton_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on MFP (gpio-pxa) GPIO 15 */
+ GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO15,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static void __init littleton_init_mmc(void)
{
+ gpiod_add_lookup_table(&littleton_mci_gpio_table);
pxa_set_mci_info(&littleton_mci_platform_data);
}
#else
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index e9f401b..20e00e9 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/lpd270.c
*
@@ -7,10 +8,6 @@
* Author: Nicolas Pitre
* Created: Nov 05, 2002
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/init.h>
@@ -33,7 +30,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-pxa/lpd270.h b/arch/arm/mach-pxa/lpd270.h
index 4edc712..4b096fb 100644
--- a/arch/arm/mach-pxa/lpd270.h
+++ b/arch/arm/mach-pxa/lpd270.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/lpd270.h
*
* Author: Lennert Buytenhek
* Created: Feb 10, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_LPD270_H
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index fe2ef9b..742d18a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/lubbock.c
*
@@ -6,10 +7,6 @@
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/clkdev.h>
#include <linux/gpio.h>
@@ -39,7 +36,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -119,12 +116,11 @@
static struct gpio_chip *lubbock_misc_wr_gc;
-void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
+static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
{
unsigned long m = mask, v = set;
lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
}
-EXPORT_SYMBOL(lubbock_set_misc_wr);
static int lubbock_udc_is_connected(void)
{
@@ -136,10 +132,26 @@
// no D+ pullup; lubbock can't connect/disconnect in software
};
+/* GPIOs for SA1111 PCMCIA */
+static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
+ .dev_id = "1800",
+ .table = {
+ { "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
+ { "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
+ { "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
+ { "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
+ { "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
+ { "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
+ { },
+ },
+};
+
static void lubbock_init_pcmcia(void)
{
struct clk *clk;
+ gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
+
/* Add an alias for the SA1111 PCMCIA clock */
clk = clk_get_sys("pxa2xx-pcmcia", NULL);
if (!IS_ERR(clk)) {
@@ -181,7 +193,7 @@
* (to J5) and poking board registers (as done below). Else it's only useful
* for the temperature sensors.
*/
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
.num_chipselect = 1,
};
@@ -440,9 +452,6 @@
.init = lubbock_mci_init,
.get_ro = lubbock_mci_get_ro,
.exit = lubbock_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c5325d1..e1a394a 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for HTC Magician PDA phones:
* i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
@@ -6,11 +7,6 @@
* Copyright (c) 2006-2007 Philipp Zabel
*
* Based on hx4700.c, spitz.c and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
@@ -18,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mfd/htc-pasic3.h>
@@ -644,9 +641,8 @@
.consumer_supplies = bq24022_consumers,
};
-static struct gpio bq24022_gpios[] = {
- { EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
+
+static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
static struct gpio_regulator_state bq24022_states[] = {
{ .value = 100000, .gpios = (0 << 0) },
@@ -656,12 +652,10 @@
static struct gpio_regulator_config bq24022_info = {
.supply_name = "bq24022",
- .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
- .enable_high = 0,
.enabled_at_boot = 1,
- .gpios = bq24022_gpios,
- .nr_gpios = ARRAY_SIZE(bq24022_gpios),
+ .gflags = bq24022_gpiod_gflags,
+ .ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
.states = bq24022_states,
.nr_states = ARRAY_SIZE(bq24022_states),
@@ -678,6 +672,17 @@
},
};
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+ .dev_id = "gpio-regulator",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
+ NULL, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ "enable", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/*
* fixed regulator for ads7846
*/
@@ -696,7 +701,6 @@
static struct fixed_voltage_config vads7846 = {
.supply_name = "vads7846",
.microvolts = 3300000, /* probably */
- .gpio = -EINVAL,
.startup_delay = 0,
.init_data = &vads7846_regulator,
};
@@ -775,12 +779,31 @@
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = magician_mci_init,
.exit = magician_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
.gpio_card_ro_invert = 1,
- .gpio_power = EGPIO_MAGICIAN_SD_POWER,
};
+/*
+ * Write protect on EGPIO register 5 index 4, this is on the second HTC
+ * EGPIO chip which starts at register 4, so we need offset 8+4=12 on that
+ * particular chip.
+ */
+#define EGPIO_MAGICIAN_nSD_READONLY_OFFSET 12
+/*
+ * Power on EGPIO register 2 index 0, so this is on the first HTC EGPIO chip
+ * starting at register 0 so we need offset 2*8+0 = 16 on that chip.
+ */
+#define EGPIO_MAGICIAN_nSD_POWER_OFFSET 16
+
+static struct gpiod_lookup_table magician_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("htc-egpio-1", EGPIO_MAGICIAN_nSD_READONLY_OFFSET,
+ "wp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_nSD_POWER_OFFSET,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
/*
* USB OHCI
@@ -913,7 +936,7 @@
.gpio_cs = GPIO14_MAGICIAN_TSC2046_CS,
};
-static struct pxa2xx_spi_master magician_spi_info = {
+static struct pxa2xx_spi_controller magician_spi_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
@@ -979,6 +1002,7 @@
i2c_register_board_info(1,
ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+ gpiod_add_lookup_table(&magician_mci_gpio_table);
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
pxa_set_udc_info(&magician_udc_info);
@@ -1007,6 +1031,7 @@
regulator_register_always_on(0, "power", pwm_backlight_supply,
ARRAY_SIZE(pwm_backlight_supply), 5000000);
+ gpiod_add_lookup_table(&bq24022_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index afd62a9..1b78829 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/mainstone.c
*
@@ -7,12 +8,9 @@
* Author: Nicolas Pitre
* Created: Nov 05, 2002
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/gpio-reg.h>
#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -39,7 +37,7 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -361,9 +359,6 @@
.init = mainstone_mci_init,
.setpower = mainstone_mci_setpower,
.exit = mainstone_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
@@ -507,12 +502,64 @@
static inline void mainstone_init_keypad(void) {}
#endif
+static int mst_pcmcia0_irqs[11] = {
+ [0 ... 10] = -1,
+ [5] = MAINSTONE_S0_CD_IRQ,
+ [8] = MAINSTONE_S0_STSCHG_IRQ,
+ [10] = MAINSTONE_S0_IRQ,
+};
+
+static int mst_pcmcia1_irqs[11] = {
+ [0 ... 10] = -1,
+ [5] = MAINSTONE_S1_CD_IRQ,
+ [8] = MAINSTONE_S1_STSCHG_IRQ,
+ [10] = MAINSTONE_S1_IRQ,
+};
+
+static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
+ .dev_id = "pxa2xx-pcmcia",
+ .table = {
+ GPIO_LOOKUP("mst-pcmcia0", 0, "a0vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 1, "a1vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 2, "a0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 3, "a1vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 4, "areset", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 5, "adetect", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia0", 6, "avs1", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia0", 7, "avs2", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia0", 8, "abvd1", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 9, "abvd2", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia0", 10, "aready", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 0, "b0vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 1, "b1vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 2, "b0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 3, "b1vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 4, "breset", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 5, "bdetect", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia1", 6, "bvs1", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia1", 7, "bvs2", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("mst-pcmcia1", 8, "bbvd1", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 9, "bbvd2", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("mst-pcmcia1", 10, "bready", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init mainstone_init(void)
{
int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+ /* Register board control register(s) as GPIOs */
+ gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
+ "mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
+ NULL, mst_pcmcia0_irqs);
+ gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
+ "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
+ NULL, mst_pcmcia1_irqs);
+ gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
+
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 3732aec..6a5451b 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/mfp-pxa2xx.c
*
@@ -7,10 +8,6 @@
* functions, this is by concept samilar to the MFP configuration
* on PXA3xx, what's more important, the low power pin state and
* wakeup detection are also supported by the same framework.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa300.h b/arch/arm/mach-pxa/mfp-pxa300.h
index 5ee51e2..1223e35 100644
--- a/arch/arm/mach-pxa/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/mfp-pxa300.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/mfp-pxa300.h
*
@@ -6,10 +7,6 @@
* Copyright (C) 2007 Marvell International Ltd.
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MFP_PXA300_H
diff --git a/arch/arm/mach-pxa/mfp-pxa320.h b/arch/arm/mach-pxa/mfp-pxa320.h
index e8797cf..21c31eb 100644
--- a/arch/arm/mach-pxa/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/mfp-pxa320.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/mfp-pxa320.h
*
@@ -6,10 +7,6 @@
* Copyright (C) 2007 Marvell International Ltd.
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MFP_PXA320_H
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 994edc0..56114df 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/mfp.c
*
@@ -7,10 +8,6 @@
*
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
index 113967b..0d195d3 100644
--- a/arch/arm/mach-pxa/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/mfp-pxa930.h
@@ -1,13 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/mfp-pxa930.h
*
* PXA930 specific MFP configuration definitions
*
* Copyright (C) 2007-2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MFP_PXA9xx_H
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 04dc78d..c360023 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -1,22 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Handles the Mitac Mio A701 Board
*
* Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/kernel.h>
@@ -31,6 +17,7 @@
#include <linux/rtc.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/pda_power.h>
@@ -397,9 +384,22 @@
static struct pxamci_platform_data mioa701_mci_info = {
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO15_SDIO_INSERT,
- .gpio_card_ro = GPIO78_SDIO_RO,
- .gpio_power = GPIO91_SDIO_EN,
+};
+
+static struct gpiod_lookup_table mioa701_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 15 */
+ GPIO_LOOKUP("gpio-pxa", GPIO15_SDIO_INSERT,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 78 */
+ GPIO_LOOKUP("gpio-pxa", GPIO78_SDIO_RO,
+ "wp", GPIO_ACTIVE_LOW),
+ /* Power on GPIO 91 */
+ GPIO_LOOKUP("gpio-pxa", GPIO91_SDIO_EN,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/* FlashRAM */
@@ -743,6 +743,7 @@
pr_err("MioA701: Failed to request GPIOs: %d", rc);
bootstrap_init();
pxa_set_fb_info(NULL, &mioa701_pxafb_info);
+ gpiod_add_lookup_table(&mioa701_mci_gpio_table);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
index 42d93f4..4ad2fa2 100644
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/* Bootloader to resume MIO A701
*
* 2007-1-12 Robert Jarzmik
- *
- * This code is licenced under the GPLv2.
*/
#include <linux/linkage.h>
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 4d89029..8ef8ac4 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/mp900.c
*
@@ -7,10 +8,6 @@
*
* 2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
* 2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 616b223..fde386f 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/mxm8x10.c
*
@@ -13,15 +14,11 @@
* 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
* Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
* rework for upstream merge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/serial_8250.h>
#include <linux/dm9000.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mtd-nand-pxa3xx.h>
@@ -326,13 +323,24 @@
static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.detect_delay_ms = 10,
- .gpio_card_detect = MXM_8X10_SD_nCD,
- .gpio_card_ro = MXM_8X10_SD_WP,
- .gpio_power = -1
+};
+
+static struct gpiod_lookup_table mxm_8x10_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ /* Card detect on GPIO 72 */
+ GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_nCD,
+ "cd", GPIO_ACTIVE_LOW),
+ /* Write protect on GPIO 84 */
+ GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
void __init mxm_8x10_mmc_init(void)
{
+ gpiod_add_lookup_table(&mxm_8x10_mci_gpio_table);
pxa_set_mci_info(&mxm_8x10_mci_platform_data);
}
#endif
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 1efe9bc..3ad0b39 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Common code for Palm LD, T5, TX, Z72
*
* Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/platform_device.h>
@@ -49,14 +45,10 @@
.detect_delay_ms = 200,
};
-void __init palm27x_mmc_init(int detect, int ro, int power,
- int power_inverted)
+void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable)
{
- palm27x_mci_platform_data.gpio_card_detect = detect;
- palm27x_mci_platform_data.gpio_card_ro = ro;
- palm27x_mci_platform_data.gpio_power = power;
- palm27x_mci_platform_data.gpio_power_invert = power_inverted;
-
+ if (gtable)
+ gpiod_add_lookup_table(gtable);
pxa_set_mci_info(&palm27x_mci_platform_data);
}
#endif
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
index d4eac3d..bd3075b 100644
--- a/arch/arm/mach-pxa/palm27x.h
+++ b/arch/arm/mach-pxa/palm27x.h
@@ -1,23 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Common functions for Palm LD, T5, TX, Z72
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef __INCLUDE_MACH_PALM27X__
#define __INCLUDE_MACH_PALM27X__
+#include <linux/gpio/machine.h>
+
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void __init palm27x_mmc_init(int detect, int ro, int power,
- int power_inverted);
+extern void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable);
#else
-static inline void palm27x_mmc_init(int detect, int ro, int power,
- int power_inverted)
+static inline void palm27x_mmc_init(struct gpiod_lookup_table *gtable)
{}
#endif
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 980f284..5f73716 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for Palm LifeDrive
*
@@ -6,12 +7,7 @@
* Based on work of:
* Alex Osborne <ato@meshy.org>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* (find more info at www.hackndev.com)
- *
*/
#include <linux/platform_device.h>
@@ -288,8 +284,20 @@
.id = -1,
};
+static struct gpiod_lookup_table palmld_ide_gpio_table = {
+ .dev_id = "pata_palmld",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_PWEN,
+ "power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_RESET,
+ "reset", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init palmld_ide_init(void)
{
+ gpiod_add_lookup_table(&palmld_ide_gpio_table);
platform_device_register(&palmld_ide_device);
}
#else
@@ -320,6 +328,19 @@
iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
}
+static struct gpiod_lookup_table palmld_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_POWER,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init palmld_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
@@ -327,8 +348,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
- GPIO_NR_PALMLD_SD_POWER, 0);
+ palm27x_mmc_init(&palmld_mci_gpio_table);
palm27x_pm_init(PALMLD_STR_BASE);
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 876144a..9024033 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for Palm Tungsten|T5
*
@@ -8,12 +9,7 @@
* Justin Kendrick <twilightsentry@gmail.com>
* RichardT5 <richard_t5@users.sourceforge.net>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* (find more info at www.hackndev.com)
- *
*/
#include <linux/platform_device.h>
@@ -182,6 +178,19 @@
memblock_reserve(0xa0200000, 0x1000);
}
+static struct gpiod_lookup_table palmt5_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_POWER,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
@@ -189,8 +198,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
- GPIO_NR_PALMT5_SD_POWER, 0);
+ palm27x_mmc_init(&palmt5_mci_gpio_table);
palm27x_pm_init(PALMT5_STR_BASE);
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h
index f850cc9..1fb1da7 100644
--- a/arch/arm/mach-pxa/palmt5.h
+++ b/arch/arm/mach-pxa/palmt5.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
*
@@ -5,11 +6,6 @@
* Marek Vasut <marek.vasut@gmail.com>
* Justin Kendrick <twilightsentry@gmail.com>
* RichardT5 <richard_t5@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_PALMT5_H_
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 1894659..f52bd15 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/palmtc.c
*
@@ -8,10 +9,6 @@
* Based on work of:
* Petr Blaha <p3t3@centrum.cz>
* Chetan S. Kumar <shivakumar.chetan@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
@@ -20,7 +17,7 @@
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/input/matrix_keypad.h>
#include <linux/ucb1400.h>
#include <linux/power_supply.h>
@@ -120,14 +117,25 @@
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data palmtc_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = GPIO_NR_PALMTC_SD_POWER,
- .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY,
- .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N,
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table palmtc_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init palmtc_mmc_init(void)
{
+ gpiod_add_lookup_table(&palmtc_mci_gpio_table);
pxa_set_mci_info(&palmtc_mci_platform_data);
}
#else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 36b4614..a92b966 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for Palm Tungsten|E2
*
@@ -7,18 +8,14 @@
* Rewrite for mainline:
* Marek Vasut <marek.vasut@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* (find more info at www.hackndev.com)
- *
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
+#include <linux/gpio/machine.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm.h>
@@ -101,9 +98,19 @@
******************************************************************************/
static struct pxamci_platform_data palmte2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
- .gpio_power = GPIO_NR_PALMTE2_SD_POWER,
+};
+
+static struct gpiod_lookup_table palmte2_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_POWER,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -354,6 +361,7 @@
pxa_set_stuart_info(NULL);
pxa_set_fb_info(NULL, &palmte2_lcd_screen);
+ gpiod_add_lookup_table(&palmte2_mci_gpio_table);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmte2.h b/arch/arm/mach-pxa/palmte2.h
index f89e989..2589400 100644
--- a/arch/arm/mach-pxa/palmte2.h
+++ b/arch/arm/mach-pxa/palmte2.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
*
* Author:
* Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_PALMTE2_H_
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 4cc05ec..2bf0f7f 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for Palm Treo smartphones
*
@@ -7,12 +8,7 @@
*
* Author: Tomas Cech <sleep_walker@suse.cz>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* (find more info at www.hackndev.com)
- *
*/
#include <linux/platform_device.h>
@@ -404,36 +400,6 @@
}
/******************************************************************************
- * diskonchip docg4 flash
- ******************************************************************************/
-#if defined(CONFIG_MACH_TREO680)
-/* REVISIT: does the centro have this device also? */
-#if IS_ENABLED(CONFIG_MTD_NAND_DOCG4)
-static struct resource docg4_resources[] = {
- {
- .start = 0x00000000,
- .end = 0x00001FFF,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device treo680_docg4_flash = {
- .name = "docg4",
- .id = -1,
- .resource = docg4_resources,
- .num_resources = ARRAY_SIZE(docg4_resources),
-};
-
-static void __init treo680_docg4_flash_init(void)
-{
- platform_device_register(&treo680_docg4_flash);
-}
-#else
-static inline void treo680_docg4_flash_init(void) {}
-#endif
-#endif
-
-/******************************************************************************
* Machine init
******************************************************************************/
static void __init treo_reserve(void)
@@ -510,24 +476,46 @@
gpio_free(GPIO_NR_TREO680_LCD_EN_N);
}
+static struct gpiod_lookup_table treo680_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init treo680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
palmphone_common_init();
treo680_gpio_init();
- palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
- GPIO_NR_TREO680_SD_POWER, 0);
- treo680_docg4_flash_init();
+ palm27x_mmc_init(&treo680_mci_gpio_table);
}
#endif
#ifdef CONFIG_MACH_CENTRO
+
+static struct gpiod_lookup_table centro685_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER,
+ "power", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init centro_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
palmphone_common_init();
- palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
- GPIO_NR_CENTRO_SD_POWER, 1);
+ palm27x_mmc_init(¢ro685_mci_gpio_table);
}
#endif
diff --git a/arch/arm/mach-pxa/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
index 714b657..5715cd5 100644
--- a/arch/arm/mach-pxa/palmtreo.h
+++ b/arch/arm/mach-pxa/palmtreo.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Palm Treo smartphones
*
@@ -7,12 +8,7 @@
*
* Author: Tomas Cech <sleep_walker@suse.cz>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* find more info at www.hackndev.com
- *
*/
#ifndef _INCLUDE_TREO_H_
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 47e3e38..926593e 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for PalmTX
*
@@ -9,12 +10,7 @@
* Jan Herman <2hp@seznam.cz>
* Michal Hrusecky
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* (find more info at www.hackndev.com)
- *
*/
#include <linux/platform_device.h>
@@ -28,8 +24,7 @@
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
+#include <linux/mtd/platnand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
@@ -247,11 +242,10 @@
******************************************************************************/
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
+static void palmtx_nand_cmd_ctl(struct nand_chip *this, int cmd,
+ unsigned int ctrl)
{
- struct nand_chip *this = mtd_to_nand(mtd);
- char __iomem *nandaddr = this->IO_ADDR_W;
+ char __iomem *nandaddr = this->legacy.IO_ADDR_W;
if (cmd == NAND_CMD_NONE)
return;
@@ -339,6 +333,19 @@
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
+static struct gpiod_lookup_table palmtx_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_POWER,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
@@ -346,8 +353,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
- GPIO_NR_PALMTX_SD_POWER, 0);
+ palm27x_mmc_init(&palmtx_mci_gpio_table);
palm27x_pm_init(PALMTX_STR_BASE);
palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 4d475f6..77fe2e3 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for Palm Zire72
*
@@ -10,12 +11,7 @@
* Rewrite for mainline:
* Marek Vasut <marek.vasut@gmail.com>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* (find more info at www.hackndev.com)
- *
*/
#include <linux/platform_device.h>
@@ -386,6 +382,19 @@
static inline void palmz72_camera_init(void) {}
#endif
+static struct gpiod_lookup_table palmz72_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N,
+ "power", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
/******************************************************************************
* Machine init
******************************************************************************/
@@ -396,8 +405,7 @@
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
- GPIO_NR_PALMZ72_SD_POWER_N, 1);
+ palm27x_mmc_init(&palmz72_mci_gpio_table);
palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
GPIO_NR_PALMZ72_USB_PULLUP, 0);
diff --git a/arch/arm/mach-pxa/palmz72.h b/arch/arm/mach-pxa/palmz72.h
index 0d4700a..40f3f99 100644
--- a/arch/arm/mach-pxa/palmz72.h
+++ b/arch/arm/mach-pxa/palmz72.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* GPIOs and interrupts for Palm Zire72 Handheld Computer
*
* Authors: Alex Osborne <bobofdoom@gmail.com>
* Jan Herman <2hp@seznam.cz>
* Sergey Lapin <slapin@ossfans.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _INCLUDE_PALMZ72_H_
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ccca9f7..7ff6f0d 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pcm027.c
* Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
@@ -14,10 +15,6 @@
* based on Intel Mainstone Board
*
* Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/irq.h>
@@ -132,7 +129,7 @@
/*
* SPI host and devices
*/
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
.num_chipselect = 1,
};
diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h
index 047cdf2..0c4ab63 100644
--- a/arch/arm/mach-pxa/pcm027.h
+++ b/arch/arm/mach-pxa/pcm027.h
@@ -1,22 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* arch/arm/mach-pxa/include/mach/pcm027.h
*
* (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
* (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 973568d..cb1c567 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* arch/arm/mach-pxa/pcm990-baseboard.c
* Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
@@ -14,10 +15,6 @@
* based on Intel Mainstone Board
*
* Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/irq.h>
@@ -370,9 +367,6 @@
.init = pcm990_mci_init,
.setpower = pcm990_mci_setpower,
.exit = pcm990_mci_exit,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
index 79d35ad..5be11d1 100644
--- a/arch/arm/mach-pxa/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/pcm990_baseboard.h
@@ -1,22 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
*
* (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
* (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "pcm027.h"
diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h
index 3aab90d..00ea352 100644
--- a/arch/arm/mach-pxa/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/suspend.h>
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1adde12..3a4ecc3 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/poodle.c
*
@@ -6,10 +7,6 @@
* Based on:
* linux/arch/arm/mach-pxa/lubbock.c Author: Nicolas Pitre
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Change Log
* 12-Dec-2002 Sharp Corporation for Poodle
* John Lenz <lenz@cs.wisc.edu> updates to 2.6
@@ -23,6 +20,7 @@
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/regulator/machine.h>
@@ -195,7 +193,7 @@
EXPORT_SYMBOL(poodle_locomo_device);
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master poodle_spi_info = {
+static struct pxa2xx_spi_controller poodle_spi_info = {
.num_chipselect = 1,
};
@@ -288,11 +286,18 @@
.init = poodle_mci_init,
.setpower = poodle_mci_setpower,
.exit = poodle_mci_exit,
- .gpio_card_detect = POODLE_GPIO_nSD_DETECT,
- .gpio_card_ro = POODLE_GPIO_nSD_WP,
- .gpio_power = -1,
};
+static struct gpiod_lookup_table poodle_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
/*
* Irda
@@ -439,6 +444,7 @@
pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
+ gpiod_add_lookup_table(&poodle_mci_gpio_table);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index aa9b255..d32d5c8 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa-dt.c
*
* Copyright (C) 2012 Daniel Mack
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include <linux/irq.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index ab8808c..678641a 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa25x.c
*
@@ -7,10 +8,6 @@
*
* Code specific to PXA21x/25x/26x variants.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
* Since this file should be linked before any other machine specific file,
* the __initcall() here will be executed first. This serves as default
* initialization stuff for PXA machines which can be overridden later if
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 5a8990a..f0ba7ed 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa27x.c
*
@@ -6,10 +7,6 @@
* Copyright: MontaVista Software Inc.
*
* Code specific to PXA27x aka Bulverde.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 6b5e566..2d26cd2 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa2xx.c
*
* code specific to pxa2xx
*
* Copyright (C) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index df83b1b..7f2f5a6 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa300.c
*
@@ -7,10 +8,6 @@
*
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index a26eec5..78abcc7 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa320.c
*
@@ -7,10 +8,6 @@
*
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index b3e2016..4bd7da1 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
*
@@ -7,10 +8,6 @@
*
* 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
* initial version: pxa310 USB Host mode support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index df9c897..5601606 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa3xx.c
*
@@ -7,10 +8,6 @@
*
* 2007-09-02: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index da912be..bf91de4 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/pxa930.c
*
* Code specific to PXA930
*
* Copyright (C) 2007-2008 Marvell Internation Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
index 9415085..45c19ca 100644
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Intel Reference Systems cplds
*
* Copyright (C) 2014 Robert Jarzmik
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
* Cplds motherboard driver, supporting lubbock and mainstone SoC board.
*/
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
deleted file mode 100644
index 0343455..0000000
--- a/arch/arm/mach-pxa/raumfeld.c
+++ /dev/null
@@ -1,1182 +0,0 @@
-/*
- * arch/arm/mach-pxa/raumfeld.c
- *
- * Support for the following Raumfeld devices:
- *
- * * Controller
- * * Connector
- * * Speaker S/M
- *
- * See http://www.raumfeld.com for details.
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/property.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/w1-gpio.h>
-#include <linux/sched.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lis3lv02d.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max8660.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-#include <linux/delay.h>
-
-#include <asm/system_info.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa300.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* common GPIO definitions */
-
-/* inputs */
-#define GPIO_ON_OFF (14)
-#define GPIO_VOLENC_A (19)
-#define GPIO_VOLENC_B (20)
-#define GPIO_CHARGE_DONE (23)
-#define GPIO_CHARGE_IND (27)
-#define GPIO_TOUCH_IRQ (32)
-#define GPIO_ETH_IRQ (40)
-#define GPIO_SPI_MISO (98)
-#define GPIO_ACCEL_IRQ (104)
-#define GPIO_RESCUE_BOOT (115)
-#define GPIO_DOCK_DETECT (116)
-#define GPIO_KEY1 (117)
-#define GPIO_KEY2 (118)
-#define GPIO_KEY3 (119)
-#define GPIO_CHARGE_USB_OK (112)
-#define GPIO_CHARGE_DC_OK (101)
-#define GPIO_CHARGE_USB_SUSP (102)
-
-/* outputs */
-#define GPIO_SHUTDOWN_SUPPLY (16)
-#define GPIO_SHUTDOWN_BATT (18)
-#define GPIO_CHRG_PEN2 (31)
-#define GPIO_TFT_VA_EN (33)
-#define GPIO_SPDIF_CS (34)
-#define GPIO_LED2 (35)
-#define GPIO_LED1 (36)
-#define GPIO_SPDIF_RESET (38)
-#define GPIO_SPI_CLK (95)
-#define GPIO_MCLK_DAC_CS (96)
-#define GPIO_SPI_MOSI (97)
-#define GPIO_W1_PULLUP_ENABLE (105)
-#define GPIO_DISPLAY_ENABLE (106)
-#define GPIO_MCLK_RESET (111)
-#define GPIO_W2W_RESET (113)
-#define GPIO_W2W_PDN (114)
-#define GPIO_CODEC_RESET (120)
-#define GPIO_AUDIO_VA_ENABLE (124)
-#define GPIO_ACCEL_CS (125)
-#define GPIO_ONE_WIRE (126)
-
-/*
- * GPIO configurations
- */
-static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
- /* UART1 */
- GPIO77_UART1_RXD,
- GPIO78_UART1_TXD,
- GPIO79_UART1_CTS,
- GPIO81_UART1_DSR,
- GPIO83_UART1_DTR,
- GPIO84_UART1_RTS,
-
- /* UART3 */
- GPIO110_UART3_RXD,
-
- /* USB Host */
- GPIO0_2_USBH_PEN,
- GPIO1_2_USBH_PWR,
-
- /* I2C */
- GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
- GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
- /* SPI */
- GPIO34_GPIO, /* SPDIF_CS */
- GPIO96_GPIO, /* MCLK_CS */
- GPIO125_GPIO, /* ACCEL_CS */
-
- /* MMC */
- GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
- GPIO5_MMC1_DAT2,
- GPIO6_MMC1_DAT3,
- GPIO7_MMC1_CLK,
- GPIO8_MMC1_CMD,
-
- /* One-wire */
- GPIO126_GPIO | MFP_LPM_FLOAT,
- GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
-
- /* CHRG_USB_OK */
- GPIO101_GPIO | MFP_PULL_HIGH,
- /* CHRG_USB_OK */
- GPIO112_GPIO | MFP_PULL_HIGH,
- /* CHRG_USB_SUSP */
- GPIO102_GPIO,
- /* DISPLAY_ENABLE */
- GPIO106_GPIO,
- /* DOCK_DETECT */
- GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
- /* LCD */
- GPIO54_LCD_LDD_0,
- GPIO55_LCD_LDD_1,
- GPIO56_LCD_LDD_2,
- GPIO57_LCD_LDD_3,
- GPIO58_LCD_LDD_4,
- GPIO59_LCD_LDD_5,
- GPIO60_LCD_LDD_6,
- GPIO61_LCD_LDD_7,
- GPIO62_LCD_LDD_8,
- GPIO63_LCD_LDD_9,
- GPIO64_LCD_LDD_10,
- GPIO65_LCD_LDD_11,
- GPIO66_LCD_LDD_12,
- GPIO67_LCD_LDD_13,
- GPIO68_LCD_LDD_14,
- GPIO69_LCD_LDD_15,
- GPIO70_LCD_LDD_16,
- GPIO71_LCD_LDD_17,
- GPIO72_LCD_FCLK,
- GPIO73_LCD_LCLK,
- GPIO74_LCD_PCLK,
- GPIO75_LCD_BIAS,
-};
-
-static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
- /* UART1 */
- GPIO77_UART1_RXD,
- GPIO78_UART1_TXD,
- GPIO79_UART1_CTS,
- GPIO81_UART1_DSR,
- GPIO83_UART1_DTR,
- GPIO84_UART1_RTS,
-
- /* UART3 */
- GPIO110_UART3_RXD,
-
- /* USB Host */
- GPIO0_2_USBH_PEN,
- GPIO1_2_USBH_PWR,
-
- /* I2C */
- GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
- GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
- /* SPI */
- GPIO34_GPIO, /* SPDIF_CS */
- GPIO96_GPIO, /* MCLK_CS */
- GPIO125_GPIO, /* ACCEL_CS */
-
- /* MMC */
- GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
- GPIO5_MMC1_DAT2,
- GPIO6_MMC1_DAT3,
- GPIO7_MMC1_CLK,
- GPIO8_MMC1_CMD,
-
- /* Ethernet */
- GPIO1_nCS2, /* CS */
- GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
-
- /* SSP for I2S */
- GPIO85_SSP1_SCLK,
- GPIO89_SSP1_EXTCLK,
- GPIO86_SSP1_FRM,
- GPIO87_SSP1_TXD,
- GPIO88_SSP1_RXD,
- GPIO90_SSP1_SYSCLK,
-
- /* SSP2 for S/PDIF */
- GPIO25_SSP2_SCLK,
- GPIO26_SSP2_FRM,
- GPIO27_SSP2_TXD,
- GPIO29_SSP2_EXTCLK,
-
- /* LEDs */
- GPIO35_GPIO | MFP_LPM_PULL_LOW,
- GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
- /* UART1 */
- GPIO77_UART1_RXD,
- GPIO78_UART1_TXD,
- GPIO79_UART1_CTS,
- GPIO81_UART1_DSR,
- GPIO83_UART1_DTR,
- GPIO84_UART1_RTS,
-
- /* UART3 */
- GPIO110_UART3_RXD,
-
- /* USB Host */
- GPIO0_2_USBH_PEN,
- GPIO1_2_USBH_PWR,
-
- /* I2C */
- GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
- GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
- /* SPI */
- GPIO34_GPIO, /* SPDIF_CS */
- GPIO96_GPIO, /* MCLK_CS */
- GPIO125_GPIO, /* ACCEL_CS */
-
- /* MMC */
- GPIO3_MMC1_DAT0,
- GPIO4_MMC1_DAT1,
- GPIO5_MMC1_DAT2,
- GPIO6_MMC1_DAT3,
- GPIO7_MMC1_CLK,
- GPIO8_MMC1_CMD,
-
- /* Ethernet */
- GPIO1_nCS2, /* CS */
- GPIO40_GPIO | MFP_PULL_HIGH, /* IRQ */
-
- /* SSP for I2S */
- GPIO85_SSP1_SCLK,
- GPIO89_SSP1_EXTCLK,
- GPIO86_SSP1_FRM,
- GPIO87_SSP1_TXD,
- GPIO88_SSP1_RXD,
- GPIO90_SSP1_SYSCLK,
-
- /* LEDs */
- GPIO35_GPIO | MFP_LPM_PULL_LOW,
- GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-/*
- * SMSC LAN9220 Ethernet
- */
-
-static struct resource smc91x_resources[] = {
- {
- .start = PXA3xx_CS2_PHYS,
- .end = PXA3xx_CS2_PHYS + 0xfffff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
- }
-};
-
-static struct smsc911x_platform_config raumfeld_smsc911x_config = {
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- .dev = {
- .platform_data = &raumfeld_smsc911x_config,
- }
-};
-
-/**
- * NAND
- */
-
-static struct mtd_partition raumfeld_nand_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0,
- .size = 0xa0000,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "BootloaderEnvironment",
- .offset = 0xa0000,
- .size = 0x20000,
- },
- {
- .name = "BootloaderSplashScreen",
- .offset = 0xc0000,
- .size = 0x60000,
- },
- {
- .name = "UBI",
- .offset = 0x120000,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
- .keep_config = 1,
- .parts = raumfeld_nand_partitions,
- .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions),
-};
-
-/**
- * USB (OHCI) support
- */
-
-static struct pxaohci_platform_data raumfeld_ohci_info = {
- .port_mode = PMM_GLOBAL_MODE,
- .flags = ENABLE_PORT1,
-};
-
-/**
- * Rotary encoder input device
- */
-
-static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
- .dev_id = "rotary-encoder.0",
- .table = {
- GPIO_LOOKUP_IDX("gpio-0",
- GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
- GPIO_LOOKUP_IDX("gpio-0",
- GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static const struct property_entry raumfeld_rotary_properties[] __initconst = {
- PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
- PROPERTY_ENTRY_U32("linux,axis", REL_X),
- PROPERTY_ENTRY_U32("rotary-encoder,relative_axis", 1),
- { },
-};
-
-static struct platform_device rotary_encoder_device = {
- .name = "rotary-encoder",
- .id = 0,
-};
-
-/**
- * GPIO buttons
- */
-
-static struct gpio_keys_button gpio_keys_button[] = {
- {
- .code = KEY_F1,
- .type = EV_KEY,
- .gpio = GPIO_KEY1,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = 5, /* ms */
- .desc = "Button 1",
- },
- {
- .code = KEY_F2,
- .type = EV_KEY,
- .gpio = GPIO_KEY2,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = 5, /* ms */
- .desc = "Button 2",
- },
- {
- .code = KEY_F3,
- .type = EV_KEY,
- .gpio = GPIO_KEY3,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = 5, /* ms */
- .desc = "Button 3",
- },
- {
- .code = KEY_F4,
- .type = EV_KEY,
- .gpio = GPIO_RESCUE_BOOT,
- .active_low = 0,
- .wakeup = 0,
- .debounce_interval = 5, /* ms */
- .desc = "rescue boot button",
- },
- {
- .code = KEY_F5,
- .type = EV_KEY,
- .gpio = GPIO_DOCK_DETECT,
- .active_low = 1,
- .wakeup = 0,
- .debounce_interval = 5, /* ms */
- .desc = "dock detect",
- },
- {
- .code = KEY_F6,
- .type = EV_KEY,
- .gpio = GPIO_ON_OFF,
- .active_low = 0,
- .wakeup = 0,
- .debounce_interval = 5, /* ms */
- .desc = "on_off button",
- },
-};
-
-static struct gpio_keys_platform_data gpio_keys_platform_data = {
- .buttons = gpio_keys_button,
- .nbuttons = ARRAY_SIZE(gpio_keys_button),
- .rep = 0,
-};
-
-static struct platform_device raumfeld_gpio_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &gpio_keys_platform_data,
- }
-};
-
-/**
- * GPIO LEDs
- */
-
-static struct gpio_led raumfeld_leds[] = {
- {
- .name = "raumfeld:1",
- .gpio = GPIO_LED1,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "raumfeld:2",
- .gpio = GPIO_LED2,
- .active_low = 0,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }
-};
-
-static struct gpio_led_platform_data raumfeld_led_platform_data = {
- .leds = raumfeld_leds,
- .num_leds = ARRAY_SIZE(raumfeld_leds),
-};
-
-static struct platform_device raumfeld_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &raumfeld_led_platform_data,
- },
-};
-
-/**
- * One-wire (W1 bus) support
- */
-
-static void w1_enable_external_pullup(int enable)
-{
- gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
- msleep(100);
-}
-
-static struct gpiod_lookup_table raumfeld_w1_gpiod_table = {
- .dev_id = "w1-gpio",
- .table = {
- GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- },
-};
-
-static struct w1_gpio_platform_data w1_gpio_platform_data = {
- .enable_external_pullup = w1_enable_external_pullup,
-};
-
-static struct platform_device raumfeld_w1_gpio_device = {
- .name = "w1-gpio",
- .dev = {
- .platform_data = &w1_gpio_platform_data
- }
-};
-
-static void __init raumfeld_w1_init(void)
-{
- int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
- "W1 external pullup enable");
-
- if (ret < 0)
- pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
- else
- gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
-
- gpiod_add_lookup_table(&raumfeld_w1_gpiod_table);
- platform_device_register(&raumfeld_w1_gpio_device);
-}
-
-/**
- * Framebuffer device
- */
-
-static struct pwm_lookup raumfeld_pwm_lookup[] = {
- PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
- PWM_POLARITY_NORMAL),
-};
-
-/* PWM controlled backlight */
-static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
- .max_brightness = 100,
- .dft_brightness = 100,
- .enable_gpio = -1,
-};
-
-static struct platform_device raumfeld_pwm_backlight_device = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &raumfeld_pwm_backlight_data,
- }
-};
-
-/* LT3593 controlled backlight */
-static struct gpio_led raumfeld_lt3593_led = {
- .name = "backlight",
- .gpio = mfp_to_gpio(MFP_PIN_GPIO17),
- .default_state = LEDS_GPIO_DEFSTATE_ON,
-};
-
-static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
- .leds = &raumfeld_lt3593_led,
- .num_leds = 1,
-};
-
-static struct platform_device raumfeld_lt3593_device = {
- .name = "leds-lt3593",
- .id = -1,
- .dev = {
- .platform_data = &raumfeld_lt3593_platform_data,
- },
-};
-
-static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
- .pixclock = 111000,
- .xres = 480,
- .yres = 272,
- .bpp = 16,
- .hsync_len = 41,
- .left_margin = 2,
- .right_margin = 1,
- .vsync_len = 10,
- .upper_margin = 3,
- .lower_margin = 1,
- .sync = 0,
-};
-
-static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
- .modes = &sharp_lq043t3dx02_mode,
- .num_modes = 1,
- .video_mem_size = 0x400000,
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-#ifdef CONFIG_PXA3XX_GCU
- .acceleration_enabled = 1,
-#endif
-};
-
-static void __init raumfeld_lcd_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
- if (ret < 0)
- pr_warn("Unable to request GPIO_TFT_VA_EN\n");
- else
- gpio_direction_output(GPIO_TFT_VA_EN, 1);
-
- msleep(100);
-
- ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
- if (ret < 0)
- pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
- else
- gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
-
- /* Hardware revision 2 has the backlight regulator controlled
- * by an LT3593, earlier and later devices use PWM for that. */
- if ((system_rev & 0xff) == 2) {
- platform_device_register(&raumfeld_lt3593_device);
- } else {
- mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
- pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
- pwm_add_table(raumfeld_pwm_lookup,
- ARRAY_SIZE(raumfeld_pwm_lookup));
- platform_device_register(&raumfeld_pwm_backlight_device);
- }
-
- pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
- platform_device_register(&pxa3xx_device_gcu);
-}
-
-/**
- * SPI devices
- */
-
-static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
- .num_chipselect = 3,
-};
-
-static struct platform_device raumfeld_spi_device = {
- .name = "spi_gpio",
- .id = 0,
- .dev = {
- .platform_data = &raumfeld_spi_platform_data,
- }
-};
-
-static struct gpiod_lookup_table raumfeld_spi_gpiod_table = {
- .dev_id = "spi_gpio",
- .table = {
- GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK,
- "sck", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI,
- "mosi", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO,
- "miso", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS,
- "cs", 0, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS,
- "cs", 1, GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS,
- "cs", 2, GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static struct lis3lv02d_platform_data lis3_pdata = {
- .click_flags = LIS3_CLICK_SINGLE_X |
- LIS3_CLICK_SINGLE_Y |
- LIS3_CLICK_SINGLE_Z,
- .irq_cfg = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
- .wakeup_flags = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
- LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
- LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
- .wakeup_thresh = 10,
- .click_thresh_x = 10,
- .click_thresh_y = 10,
- .click_thresh_z = 10,
-};
-
-#define SPI_AK4104 \
-{ \
- .modalias = "ak4104-codec", \
- .max_speed_hz = 10000, \
- .bus_num = 0, \
- .chip_select = 0, \
-}
-
-#define SPI_LIS3 \
-{ \
- .modalias = "lis3lv02d_spi", \
- .max_speed_hz = 1000000, \
- .bus_num = 0, \
- .chip_select = 1, \
- .platform_data = &lis3_pdata, \
- .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \
-}
-
-#define SPI_DAC7512 \
-{ \
- .modalias = "dac7512", \
- .max_speed_hz = 1000000, \
- .bus_num = 0, \
- .chip_select = 2, \
-}
-
-static struct spi_board_info connector_spi_devices[] __initdata = {
- SPI_AK4104,
- SPI_DAC7512,
-};
-
-static struct spi_board_info speaker_spi_devices[] __initdata = {
- SPI_DAC7512,
-};
-
-static struct spi_board_info controller_spi_devices[] __initdata = {
- SPI_LIS3,
-};
-
-/**
- * MMC for Marvell Libertas 8688 via SDIO
- */
-
-static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
-{
- gpio_set_value(GPIO_W2W_RESET, 1);
- gpio_set_value(GPIO_W2W_PDN, 1);
-
- return 0;
-}
-
-static void raumfeld_mci_exit(struct device *dev, void *data)
-{
- gpio_set_value(GPIO_W2W_RESET, 0);
- gpio_set_value(GPIO_W2W_PDN, 0);
-}
-
-static struct pxamci_platform_data raumfeld_mci_platform_data = {
- .init = raumfeld_mci_init,
- .exit = raumfeld_mci_exit,
- .detect_delay_ms = 200,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
-};
-
-/*
- * External power / charge logic
- */
-
-static int power_supply_init(struct device *dev)
-{
- return 0;
-}
-
-static void power_supply_exit(struct device *dev)
-{
-}
-
-static int raumfeld_is_ac_online(void)
-{
- return !gpio_get_value(GPIO_CHARGE_DC_OK);
-}
-
-static int raumfeld_is_usb_online(void)
-{
- return 0;
-}
-
-static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
-
-static void raumfeld_power_signal_charged(void)
-{
- struct power_supply *psy =
- power_supply_get_by_name(raumfeld_power_supplicants[0]);
-
- if (psy) {
- power_supply_set_battery_charged(psy);
- power_supply_put(psy);
- }
-}
-
-static int raumfeld_power_resume(void)
-{
- /* check if GPIO_CHARGE_DONE went low while we were sleeping */
- if (!gpio_get_value(GPIO_CHARGE_DONE))
- raumfeld_power_signal_charged();
-
- return 0;
-}
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = raumfeld_is_ac_online,
- .is_usb_online = raumfeld_is_usb_online,
- .exit = power_supply_exit,
- .supplied_to = raumfeld_power_supplicants,
- .num_supplicants = ARRAY_SIZE(raumfeld_power_supplicants),
- .resume = raumfeld_power_resume,
-};
-
-static struct resource power_supply_resources[] = {
- {
- .name = "ac",
- .flags = IORESOURCE_IRQ |
- IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
- .start = GPIO_CHARGE_DC_OK,
- .end = GPIO_CHARGE_DC_OK,
- },
-};
-
-static irqreturn_t charge_done_irq(int irq, void *dev_id)
-{
- raumfeld_power_signal_charged();
- return IRQ_HANDLED;
-}
-
-static struct platform_device raumfeld_power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
- .resource = power_supply_resources,
- .num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static void __init raumfeld_power_init(void)
-{
- int ret;
-
- /* Set PEN2 high to enable maximum charge current */
- ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
- if (ret < 0)
- pr_warn("Unable to request GPIO_CHRG_PEN2\n");
- else
- gpio_direction_output(GPIO_CHRG_PEN2, 1);
-
- ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
- if (ret < 0)
- pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
-
- ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
- if (ret < 0)
- pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
- else
- gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
-
- power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
- power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
-
- ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
- &charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
- "charge_done", NULL);
-
- if (ret < 0)
- printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
- GPIO_CHARGE_DONE);
- else
- platform_device_register(&raumfeld_power_supply);
-}
-
-/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
-
-static struct regulator_consumer_supply audio_va_consumer_supply =
- REGULATOR_SUPPLY("va", "0-0048");
-
-static struct regulator_init_data audio_va_initdata = {
- .consumer_supplies = &audio_va_consumer_supply,
- .num_consumer_supplies = 1,
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct fixed_voltage_config audio_va_config = {
- .supply_name = "audio_va",
- .microvolts = 5000000,
- .gpio = GPIO_AUDIO_VA_ENABLE,
- .enable_high = 1,
- .enabled_at_boot = 0,
- .init_data = &audio_va_initdata,
-};
-
-static struct platform_device audio_va_device = {
- .name = "reg-fixed-voltage",
- .id = 0,
- .dev = {
- .platform_data = &audio_va_config,
- },
-};
-
-/* Dummy supplies for Codec's VD/VLC */
-
-static struct regulator_consumer_supply audio_dummy_supplies[] = {
- REGULATOR_SUPPLY("vd", "0-0048"),
- REGULATOR_SUPPLY("vlc", "0-0048"),
-};
-
-static struct regulator_init_data audio_dummy_initdata = {
- .consumer_supplies = audio_dummy_supplies,
- .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct fixed_voltage_config audio_dummy_config = {
- .supply_name = "audio_vd",
- .microvolts = 3300000,
- .gpio = -1,
- .init_data = &audio_dummy_initdata,
-};
-
-static struct platform_device audio_supply_dummy_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &audio_dummy_config,
- },
-};
-
-static struct platform_device *audio_regulator_devices[] = {
- &audio_va_device,
- &audio_supply_dummy_device,
-};
-
-/**
- * Regulator support via MAX8660
- */
-
-static struct regulator_consumer_supply vcc_mmc_supply =
- REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
-
-static struct regulator_init_data vcc_mmc_init_data = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_MODE,
- },
- .consumer_supplies = &vcc_mmc_supply,
- .num_consumer_supplies = 1,
-};
-
-static struct max8660_subdev_data max8660_v6_subdev_data = {
- .id = MAX8660_V6,
- .name = "vmmc",
- .platform_data = &vcc_mmc_init_data,
-};
-
-static struct max8660_platform_data max8660_pdata = {
- .subdevs = &max8660_v6_subdev_data,
- .num_subdevs = 1,
-};
-
-/**
- * I2C devices
- */
-
-static struct i2c_board_info raumfeld_pwri2c_board_info = {
- .type = "max8660",
- .addr = 0x34,
- .platform_data = &max8660_pdata,
-};
-
-static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
- .type = "cs4270",
- .addr = 0x48,
-};
-
-static struct gpiod_lookup_table raumfeld_controller_gpios_table = {
- .dev_id = "0-000a",
- .table = {
- GPIO_LOOKUP("gpio-pxa",
- GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-static const struct resource raumfeld_controller_resources[] __initconst = {
- {
- .start = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
- .type = "eeti_ts",
- .addr = 0x0a,
- .resources = raumfeld_controller_resources,
- .num_resources = ARRAY_SIZE(raumfeld_controller_resources),
-};
-
-static struct platform_device *raumfeld_common_devices[] = {
- &raumfeld_gpio_keys_device,
- &raumfeld_led_device,
- &raumfeld_spi_device,
-};
-
-static void __init raumfeld_audio_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
- if (ret < 0)
- pr_warn("unable to request GPIO_CODEC_RESET\n");
- else
- gpio_direction_output(GPIO_CODEC_RESET, 1);
-
- ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
- if (ret < 0)
- pr_warn("unable to request GPIO_SPDIF_RESET\n");
- else
- gpio_direction_output(GPIO_SPDIF_RESET, 1);
-
- ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
- if (ret < 0)
- pr_warn("unable to request GPIO_MCLK_RESET\n");
- else
- gpio_direction_output(GPIO_MCLK_RESET, 1);
-
- platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
-}
-
-static void __init raumfeld_common_init(void)
-{
- int ret;
-
- /* The on/off button polarity has changed after revision 1 */
- if ((system_rev & 0xff) > 1) {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
- if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
- gpio_keys_button[i].active_low = 1;
- }
-
- enable_irq_wake(IRQ_WAKEUP0);
-
- pxa3xx_set_nand_info(&raumfeld_nand_info);
- pxa3xx_set_i2c_power_info(NULL);
- pxa_set_ohci_info(&raumfeld_ohci_info);
- pxa_set_mci_info(&raumfeld_mci_platform_data);
- pxa_set_i2c_info(NULL);
- pxa_set_ffuart_info(NULL);
-
- ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
- if (ret < 0)
- pr_warn("Unable to request GPIO_W2W_RESET\n");
- else
- gpio_direction_output(GPIO_W2W_RESET, 0);
-
- ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
- if (ret < 0)
- pr_warn("Unable to request GPIO_W2W_PDN\n");
- else
- gpio_direction_output(GPIO_W2W_PDN, 0);
-
- /* this can be used to switch off the device */
- ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
- if (ret < 0)
- pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
- else
- gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
-
- gpiod_add_lookup_table(&raumfeld_spi_gpiod_table);
- platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
- i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
-}
-
-static void __init __maybe_unused raumfeld_controller_init(void)
-{
- int ret;
-
- pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
-
- gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
- device_add_properties(&rotary_encoder_device.dev,
- raumfeld_rotary_properties);
- platform_device_register(&rotary_encoder_device);
-
- spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
-
- gpiod_add_lookup_table(&raumfeld_controller_gpios_table);
- i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
-
- ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
- if (ret < 0)
- pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
- else
- gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
-
- raumfeld_common_init();
- raumfeld_power_init();
- raumfeld_lcd_init();
- raumfeld_w1_init();
-}
-
-static void __init __maybe_unused raumfeld_connector_init(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
- spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
- i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
- platform_device_register(&smc91x_device);
-
- raumfeld_audio_init();
- raumfeld_common_init();
-}
-
-static void __init __maybe_unused raumfeld_speaker_init(void)
-{
- pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
- spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
- i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
- platform_device_register(&smc91x_device);
-
- gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
- device_add_properties(&rotary_encoder_device.dev,
- raumfeld_rotary_properties);
- platform_device_register(&rotary_encoder_device);
-
- raumfeld_audio_init();
- raumfeld_common_init();
-}
-
-/* physical memory regions */
-#define RAUMFELD_SDRAM_BASE 0xa0000000 /* SDRAM region */
-
-#ifdef CONFIG_MACH_RAUMFELD_RC
-MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
- .atag_offset = 0x100,
- .init_machine = raumfeld_controller_init,
- .map_io = pxa3xx_map_io,
- .nr_irqs = PXA_NR_IRQS,
- .init_irq = pxa3xx_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .init_time = pxa_timer_init,
- .restart = pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
-MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
- .atag_offset = 0x100,
- .init_machine = raumfeld_connector_init,
- .map_io = pxa3xx_map_io,
- .nr_irqs = PXA_NR_IRQS,
- .init_irq = pxa3xx_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .init_time = pxa_timer_init,
- .restart = pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
-MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
- .atag_offset = 0x100,
- .init_machine = raumfeld_speaker_init,
- .map_io = pxa3xx_map_io,
- .nr_irqs = PXA_NR_IRQS,
- .init_irq = pxa3xx_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .init_time = pxa_timer_init,
- .restart = pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 263b152..af78405 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -1,8 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0-only
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 8349910..3275b67 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/saar.c
*
* Support for the Marvell PXA930 Handheld Platform (aka SAAR)
*
* Copyright (C) 2007-2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index ef9fd9b..83cfbb8 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
* series of PDAs
@@ -5,11 +6,6 @@
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#undef DEBUG
diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index fa75b6d..20e4cab 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* SharpSL Battery/PM Driver
*
* Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef _MACH_SHARPSL_PM
#define _MACH_SHARPSL_PM
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 5d50025..a4fdc39 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for Sharp SL-Cxx00 Series of PDAs
* Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
@@ -5,11 +6,6 @@
* Copyright (c) 2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches/lubbock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
@@ -18,6 +14,7 @@
#include <linux/delay.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -571,7 +568,7 @@
},
};
-static struct pxa2xx_spi_master spitz_spi_info = {
+static struct pxa2xx_spi_controller spitz_spi_info = {
.num_chipselect = 3,
};
@@ -615,13 +612,22 @@
.detect_delay_ms = 250,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.setpower = spitz_mci_setpower,
- .gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
- .gpio_card_ro = SPITZ_GPIO_nSD_WP,
- .gpio_power = -1,
+};
+
+static struct gpiod_lookup_table spitz_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static void __init spitz_mmc_init(void)
{
+ gpiod_add_lookup_table(&spitz_mci_gpio_table);
pxa_set_mci_info(&spitz_mci_platform_data);
}
#else
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 4e64a14..25a1f8c 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Battery and Power Management code for the Sharp SL-Cxx00
*
* Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index bbea5fa..e2353f7 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/stargate2.c
*
@@ -6,10 +7,6 @@
* Copyright: Intel Corp.
*
* Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -337,15 +334,15 @@
.num_resources = 1,
};
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_0_info = {
.num_chipselect = 1,
};
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_1_info = {
.num_chipselect = 1,
};
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
.num_chipselect = 1,
};
@@ -436,9 +433,6 @@
static struct pxamci_platform_data imote2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
.get_ro = imote2_mci_get_ro,
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
static struct gpio_led imote2_led_pins[] = {
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 4b38e82..93466fa 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/tavorevb.c
*
* Support for the Marvell PXA930 Evaluation Board
*
* Copyright (C) 2007-2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
#include <linux/module.h>
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index 8360608..c954163 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Bluetooth built-in chip control
*
* Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index cb5cd8e..f537ff1 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for Sharp SL-C6000x PDAs
* Model: (Tosa)
@@ -5,11 +6,6 @@
* Copyright (c) 2005 Dirk Opfer
*
* Based on code written by Sharp/Lineo for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/clkdev.h>
@@ -31,6 +27,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/power/gpio-charger.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
@@ -291,9 +288,19 @@
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = tosa_mci_init,
.exit = tosa_mci_exit,
- .gpio_card_detect = TOSA_GPIO_nSD_DETECT,
- .gpio_card_ro = TOSA_GPIO_SD_WP,
- .gpio_power = TOSA_GPIO_PWR_ON,
+};
+
+static struct gpiod_lookup_table tosa_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON,
+ "power", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/*
@@ -802,7 +809,7 @@
.dev.platform_data = &tosa_bt_data,
};
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp_master_info = {
.num_chipselect = 1,
};
@@ -908,6 +915,7 @@
/* enable batt_fault */
PMCR = 0x01;
+ gpiod_add_lookup_table(&tosa_mci_gpio_table);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h
index efc3c3d..56acd5d 100644
--- a/arch/arm/mach-pxa/tosa_bt.h
+++ b/arch/arm/mach-pxa/tosa_bt.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Tosa bluetooth built-in chip control.
*
* Later it may be shared with some other platforms.
*
* Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#ifndef TOSA_BT_H
#define TOSA_BT_H
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 55b8c50..f76f8be 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/trizeps4.c
*
@@ -6,10 +7,6 @@
* Author: Jürgen Schindele
* Created: 20 02, 2006
* Copyright: Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
@@ -35,7 +32,7 @@
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -355,9 +352,6 @@
.exit = trizeps4_mci_exit,
.get_ro = NULL, /* write-protection not supported */
.setpower = NULL, /* power-switching not supported */
- .gpio_card_detect = -1,
- .gpio_card_ro = -1,
- .gpio_power = -1,
};
/****************************************************************************
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index ab2f892..c06031d 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/viper.c
*
@@ -14,10 +15,6 @@
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/types.h>
@@ -58,7 +55,7 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#include <asm/system_info.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/viper.h b/arch/arm/mach-pxa/viper.h
index 5f5fbf1..5a8b132 100644
--- a/arch/arm/mach-pxa/viper.h
+++ b/arch/arm/mach-pxa/viper.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/viper.h
*
@@ -12,10 +13,6 @@
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef ARCH_VIPER_H
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f65dfb6..26a5ebc 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Hardware definitions for Voipac PXA270
*
* Copyright (C) 2010
* Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/platform_device.h>
@@ -17,6 +13,7 @@
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -240,14 +237,23 @@
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_power = -1,
- .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
- .gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table vpac270_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO53_VPAC270_SD_DETECT_N,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO52_VPAC270_SD_READONLY,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init vpac270_mmc_init(void)
{
+ gpiod_add_lookup_table(&vpac270_mci_gpio_table);
pxa_set_mci_info(&vpac270_mci_platform_data);
}
#else
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index c368c98..f485146 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/* linux/arch/arm/mach-pxa/xcep.c
*
* Support for the Iskratel Electronics XCEP platform as used in
@@ -8,10 +9,6 @@
* Contributions by: Matej Kenda <matej.kenda@i-tech.si>
* Created: June 2006
* Copyright: (C) 2006-2009 Instrumentation Technologies
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 6fffcfc..900cefc 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/z2.c
*
@@ -7,10 +8,6 @@
*
* Based on research and code by: Ken McGuire
* Based on mainstone.c as modified for the Zipit Z2.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
@@ -27,6 +24,7 @@
#include <linux/power_supply.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
@@ -290,14 +288,21 @@
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data z2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT,
- .gpio_power = -1,
- .gpio_card_ro = -1,
.detect_delay_ms = 200,
};
+static struct gpiod_lookup_table z2_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO96_ZIPITZ2_SD_DETECT,
+ "cd", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static void __init z2_mmc_init(void)
{
+ gpiod_add_lookup_table(&z2_mci_gpio_table);
pxa_set_mci_info(&z2_mci_platform_data);
}
#else
@@ -599,12 +604,12 @@
},
};
-static struct pxa2xx_spi_master pxa_ssp1_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp1_master_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
.num_chipselect = 1,
};
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index e385179..da113c8 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for the Arcom ZEUS.
*
@@ -5,10 +6,6 @@
*
* Loosely based on Arcom's 2.6.16.28.
* Maintained by Marc Zyngier <maz@misterjones.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/cpufreq.h>
@@ -17,6 +14,7 @@
#include <linux/irq.h>
#include <linux/pm.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/serial_8250.h>
#include <linux/dm9000.h>
#include <linux/mmc/host.h>
@@ -390,7 +388,7 @@
};
/* SPI interface on SSP3 */
-static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
+static struct pxa2xx_spi_controller pxa2xx_spi_ssp3_master_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
@@ -410,7 +408,6 @@
static struct fixed_voltage_config can_regulator_pdata = {
.supply_name = "CAN_SHDN",
.microvolts = 3300000,
- .gpio = ZEUS_CAN_SHDN_GPIO,
.init_data = &can_regulator_init_data,
};
@@ -422,6 +419,15 @@
},
};
+static struct gpiod_lookup_table can_regulator_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
+ NULL, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
.oscillator_frequency = 16*1000*1000,
};
@@ -538,8 +544,6 @@
static struct fixed_voltage_config zeus_ohci_regulator_config = {
.supply_name = "vbus2",
.microvolts = 5000000, /* 5.0V */
- .gpio = ZEUS_USB2_PWREN_GPIO,
- .enable_high = 1,
.startup_delay = 0,
.init_data = &zeus_ohci_regulator_data,
};
@@ -552,6 +556,15 @@
},
};
+static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO,
+ NULL, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct pxaohci_platform_data zeus_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
/* Clear Power Control Polarity Low and set Power Sense
@@ -559,7 +572,7 @@
.flags = ENABLE_PORT_ALL | POWER_SENSE_LOW,
};
-static void zeus_register_ohci(void)
+static void __init zeus_register_ohci(void)
{
/* Port 2 is shared between host and client interface. */
UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
@@ -646,10 +659,18 @@
static struct pxamci_platform_data zeus_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.detect_delay_ms = 250,
- .gpio_card_detect = ZEUS_MMC_CD_GPIO,
- .gpio_card_ro = ZEUS_MMC_WP_GPIO,
.gpio_card_ro_invert = 1,
- .gpio_power = -1
+};
+
+static struct gpiod_lookup_table zeus_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_CD_GPIO,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_WP_GPIO,
+ "wp", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
/*
@@ -855,6 +876,8 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
+ gpiod_add_lookup_table(&can_regulator_gpiod_table);
+ gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table);
platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
zeus_register_ohci();
@@ -864,6 +887,7 @@
else
pxa_set_fb_info(NULL, &zeus_fb_info);
+ gpiod_add_lookup_table(&zeus_mci_gpio_table);
pxa_set_mci_info(&zeus_mci_platform_data);
pxa_set_udc_info(&zeus_udc_info);
pxa_set_ac97_info(&zeus_ac97_info);
diff --git a/arch/arm/mach-pxa/zeus.h b/arch/arm/mach-pxa/zeus.h
index 56024f8..8fa6b29 100644
--- a/arch/arm/mach-pxa/zeus.h
+++ b/arch/arm/mach-pxa/zeus.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-pxa/include/mach/zeus.h
*
@@ -6,10 +7,6 @@
* Copyright: Arcom Control Systems Ltd.
*
* Maintained by: Marc Zyngier <maz@misterjones.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef _MACH_ZEUS_H
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 52e70a5..bf2ab5b 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/zylonite.c
*
@@ -7,10 +8,6 @@
*
* 2007-09-04: eric miao <eric.miao@marvell.com>
* rewrite to align with latest kernel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
@@ -19,7 +16,7 @@
#include <linux/leds.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
@@ -227,33 +224,68 @@
static struct pxamci_platform_data zylonite_mci_platform_data = {
.detect_delay_ms= 200,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = EXT_GPIO(0),
- .gpio_card_ro = EXT_GPIO(2),
- .gpio_power = -1,
+};
+
+#define PCA9539A_MCI_CD 0
+#define PCA9539A_MCI1_CD 1
+#define PCA9539A_MCI_WP 2
+#define PCA9539A_MCI1_WP 3
+#define PCA9539A_MCI3_CD 30
+#define PCA9539A_MCI3_WP 31
+
+static struct gpiod_lookup_table zylonite_mci_gpio_table = {
+ .dev_id = "pxa2xx-mci.0",
+ .table = {
+ GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI_CD,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct pxamci_platform_data zylonite_mci2_platform_data = {
.detect_delay_ms= 200,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = EXT_GPIO(1),
- .gpio_card_ro = EXT_GPIO(3),
- .gpio_power = -1,
+};
+
+static struct gpiod_lookup_table zylonite_mci2_gpio_table = {
+ .dev_id = "pxa2xx-mci.1",
+ .table = {
+ GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI1_CD,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI1_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct pxamci_platform_data zylonite_mci3_platform_data = {
.detect_delay_ms= 200,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = EXT_GPIO(30),
- .gpio_card_ro = EXT_GPIO(31),
- .gpio_power = -1,
+};
+
+static struct gpiod_lookup_table zylonite_mci3_gpio_table = {
+ .dev_id = "pxa2xx-mci.2",
+ .table = {
+ GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI3_CD,
+ "cd", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI3_WP,
+ "wp", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static void __init zylonite_init_mmc(void)
{
+ gpiod_add_lookup_table(&zylonite_mci_gpio_table);
pxa_set_mci_info(&zylonite_mci_platform_data);
+ gpiod_add_lookup_table(&zylonite_mci2_gpio_table);
pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
- if (cpu_is_pxa310())
+ if (cpu_is_pxa310()) {
+ gpiod_add_lookup_table(&zylonite_mci3_gpio_table);
pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
+ }
}
#else
static inline void zylonite_init_mmc(void) {}
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 0ff4e21..956fec1 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/zylonite_pxa300.c
*
@@ -7,10 +8,6 @@
* Copyright (C) 2007 Marvell Internation Ltd.
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>
@@ -230,11 +227,13 @@
static struct i2c_board_info zylonite_i2c_board_info[] = {
{
.type = "pca9539",
+ .dev_name = "pca9539-a",
.addr = 0x74,
.platform_data = &gpio_exp[0],
.irq = PXA_GPIO_TO_IRQ(18),
}, {
.type = "pca9539",
+ .dev_name = "pca9539-b",
.addr = 0x75,
.platform_data = &gpio_exp[1],
.irq = PXA_GPIO_TO_IRQ(19),
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 47961ae..94cb834 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-pxa/zylonite_pxa320.c
*
@@ -7,10 +8,6 @@
* Copyright (C) 2007 Marvell Internation Ltd.
* 2007-08-21: eric miao <eric.miao@marvell.com>
* initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/module.h>