Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/arch/arm/mach-at91/.gitignore b/arch/arm/mach-at91/.gitignore
new file mode 100644
index 0000000..2ecd6f5
--- /dev/null
+++ b/arch/arm/mach-at91/.gitignore
@@ -0,0 +1 @@
+pm_data-offsets.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 903f23c..af41725 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
menuconfig ARCH_AT91
bool "AT91/Microchip SoCs"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
@@ -21,7 +22,6 @@
depends on ARCH_MULTI_V7
select SOC_SAMA5
select CACHE_L2X0
- select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
select HAVE_AT91_H32MX
@@ -36,7 +36,6 @@
bool "SAMA5D3 family"
depends on ARCH_MULTI_V7
select SOC_SAMA5
- select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
@@ -50,7 +49,6 @@
depends on ARCH_MULTI_V7
select SOC_SAMA5
select CACHE_L2X0
- select HAVE_FB_ATMEL
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
@@ -107,6 +105,29 @@
AT91SAM9X35
AT91SAM9XE
+comment "Clocksource driver selection"
+
+config ATMEL_CLOCKSOURCE_PIT
+ bool "Periodic Interval Timer (PIT) support"
+ depends on SOC_AT91SAM9 || SOC_SAMA5
+ default SOC_AT91SAM9 || SOC_SAMA5
+ select ATMEL_PIT
+ help
+ Select this to get a clocksource based on the Atmel Periodic Interval
+ Timer. It has a relatively low resolution and the TC Block clocksource
+ should be preferred.
+
+config ATMEL_CLOCKSOURCE_TCB
+ bool "Timer Counter Blocks (TCB) support"
+ default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
+ select ATMEL_TCB_CLKSRC
+ help
+ Select this to get a high precision clocksource based on a
+ TC block with a 5+ MHz base clock rate.
+ On platforms with 16-bit counters, two timer channels are combined
+ to make a single 32-bit timer.
+ It can also be used as a clock event device supporting oneshot mode.
+
config HAVE_AT91_UTMI
bool
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 7415f18..de64301 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -19,10 +19,10 @@
CFLAGS_pm.o += -DDEBUG
endif
-arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
- $(call if_changed_dep,cc_s_c)
-
-include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
+$(obj)/pm_data-offsets.h: $(obj)/pm_data-offsets.s FORCE
$(call filechk,offsets,__PM_DATA_OFFSETS_H__)
-arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
+$(obj)/pm_suspend.o: $(obj)/pm_data-offsets.h
+
+targets += pm_data-offsets.s
+clean-files += pm_data-offsets.h
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index eacfc3f..cec195d 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
# Empty file waiting for deletion once Makefile.boot isn't needed any more.
# Patch waits for application at
# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 656ad40..4f81862 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Setup code for AT91RM9200
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
* 2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/of.h>
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 3dbdef4..bf629c9 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Setup code for AT91SAM9
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/of.h>
@@ -32,3 +31,21 @@
.init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
+
+static void __init sam9x60_init(void)
+{
+ of_platform_default_populate(NULL, NULL, NULL);
+
+ sam9x60_pm_init();
+}
+
+static const char *const sam9x60_dt_board_compat[] __initconst = {
+ "microchip,sam9x60",
+ NULL
+};
+
+DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
+ /* Maintainer: Microchip */
+ .init_machine = sam9x60_init,
+ .dt_compat = sam9x60_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index e2bd172..0a4cdcb 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/mach-at91/generic.h
*
* Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef _AT91_GENERIC_H
@@ -14,11 +11,13 @@
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9_pm_init(void);
+extern void __init sam9x60_pm_init(void);
extern void __init sama5_pm_init(void);
extern void __init sama5d2_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9_pm_init(void) { }
+static inline void __init sam9x60_pm_init(void) { }
static inline void __init sama5_pm_init(void) { }
static inline void __init sama5d2_pm_init(void) { }
#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 32fae4d..d5af6ae 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/mach-at91/pm.c
* AT91 Power Management
*
* Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/genalloc.h>
@@ -19,6 +15,7 @@
#include <linux/suspend.h>
#include <linux/clk/at91_pmc.h>
+#include <linux/platform_data/atmel.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
@@ -39,6 +36,20 @@
extern void at91_pinctrl_gpio_resume(void);
#endif
+struct at91_soc_pm {
+ int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+ int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+ const struct of_device_id *ws_ids;
+ struct at91_pm_data data;
+};
+
+static struct at91_soc_pm soc_pm = {
+ .data = {
+ .standby_mode = AT91_PM_STANDBY,
+ .suspend_mode = AT91_PM_ULP0,
+ },
+};
+
static const match_table_t pm_modes __initconst = {
{ AT91_PM_STANDBY, "standby" },
{ AT91_PM_ULP0, "ulp0" },
@@ -47,16 +58,11 @@
{ -1, NULL },
};
-static struct at91_pm_data pm_data = {
- .standby_mode = AT91_PM_STANDBY,
- .suspend_mode = AT91_PM_ULP0,
-};
-
#define at91_ramc_read(id, field) \
- __raw_readl(pm_data.ramc[id] + field)
+ __raw_readl(soc_pm.data.ramc[id] + field)
#define at91_ramc_write(id, field, value) \
- __raw_writel(value, pm_data.ramc[id] + field)
+ __raw_writel(value, soc_pm.data.ramc[id] + field)
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -91,6 +97,8 @@
{ .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) },
{ .pmc_fsmr_bit = AT91_PMC_USBAL },
{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
+ { .pmc_fsmr_bit = AT91_PMC_RTTAL },
+ { .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
};
static const struct of_device_id sama5d2_ws_ids[] = {
@@ -105,6 +113,17 @@
{ /* sentinel */ }
};
+static const struct of_device_id sam9x60_ws_ids[] = {
+ { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
+ { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
+ { .compatible = "usb-ohci", .data = &ws_info[2] },
+ { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
+ { .compatible = "usb-ehci", .data = &ws_info[2] },
+ { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
+ { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
+ { /* sentinel */ }
+};
+
static int at91_pm_config_ws(unsigned int pm_mode, bool set)
{
const struct wakeup_source_info *wsi;
@@ -116,24 +135,22 @@
if (pm_mode != AT91_PM_ULP1)
return 0;
- if (!pm_data.pmc || !pm_data.shdwc)
+ if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
return -EPERM;
if (!set) {
- writel(mode, pm_data.pmc + AT91_PMC_FSMR);
+ writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
return 0;
}
- /* SHDWC.WUIR */
- val = readl(pm_data.shdwc + 0x0c);
- mode |= (val & 0x3ff);
- polarity |= ((val >> 16) & 0x3ff);
+ if (soc_pm.config_shdwc_ws)
+ soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
/* SHDWC.MR */
- val = readl(pm_data.shdwc + 0x04);
+ val = readl(soc_pm.data.shdwc + 0x04);
/* Loop through defined wakeup sources. */
- for_each_matching_node_and_match(np, sama5d2_ws_ids, &match) {
+ for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
pdev = of_find_device_by_node(np);
if (!pdev)
continue;
@@ -143,20 +160,20 @@
/* Check if enabled on SHDWC. */
if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
- goto put_node;
+ goto put_device;
mode |= wsi->pmc_fsmr_bit;
if (wsi->set_polarity)
polarity |= wsi->pmc_fsmr_bit;
}
-put_node:
- of_node_put(np);
+put_device:
+ put_device(&pdev->dev);
}
if (mode) {
- writel(mode, pm_data.pmc + AT91_PMC_FSMR);
- writel(polarity, pm_data.pmc + AT91_PMC_FSPR);
+ if (soc_pm.config_pmc_ws)
+ soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
} else {
pr_err("AT91: PM: no ULP1 wakeup sources found!");
}
@@ -164,6 +181,34 @@
return mode ? 0 : -EPERM;
}
+static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
+ u32 *polarity)
+{
+ u32 val;
+
+ /* SHDWC.WUIR */
+ val = readl(shdwc + 0x0c);
+ *mode |= (val & 0x3ff);
+ *polarity |= ((val >> 16) & 0x3ff);
+
+ return 0;
+}
+
+static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+ writel(mode, pmc + AT91_PMC_FSMR);
+ writel(polarity, pmc + AT91_PMC_FSPR);
+
+ return 0;
+}
+
+static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+ writel(mode, pmc + AT91_PMC_FSMR);
+
+ return 0;
+}
+
/*
* Called after processes are frozen, but before we shutdown devices.
*/
@@ -171,18 +216,18 @@
{
switch (state) {
case PM_SUSPEND_MEM:
- pm_data.mode = pm_data.suspend_mode;
+ soc_pm.data.mode = soc_pm.data.suspend_mode;
break;
case PM_SUSPEND_STANDBY:
- pm_data.mode = pm_data.standby_mode;
+ soc_pm.data.mode = soc_pm.data.standby_mode;
break;
default:
- pm_data.mode = -1;
+ soc_pm.data.mode = -1;
}
- return at91_pm_config_ws(pm_data.mode, true);
+ return at91_pm_config_ws(soc_pm.data.mode, true);
}
/*
@@ -194,10 +239,10 @@
unsigned long scsr;
int i;
- scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
+ scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
/* USB must not be using PLLB */
- if ((scsr & pm_data.uhp_udp_mask) != 0) {
+ if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
@@ -208,7 +253,7 @@
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
- css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
@@ -230,7 +275,7 @@
*/
int at91_suspend_entering_slow_clock(void)
{
- return (pm_data.mode >= AT91_PM_ULP0);
+ return (soc_pm.data.mode >= AT91_PM_ULP0);
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
@@ -243,14 +288,14 @@
flush_cache_all();
outer_disable();
- at91_suspend_sram_fn(&pm_data);
+ at91_suspend_sram_fn(&soc_pm.data);
return 0;
}
static void at91_pm_suspend(suspend_state_t state)
{
- if (pm_data.mode == AT91_PM_BACKUP) {
+ if (soc_pm.data.mode == AT91_PM_BACKUP) {
pm_bu->suspended = 1;
cpu_suspend(0, at91_suspend_finish);
@@ -289,7 +334,7 @@
/*
* Ensure that clocks are in a valid state.
*/
- if (pm_data.mode >= AT91_PM_ULP0 &&
+ if (soc_pm.data.mode >= AT91_PM_ULP0 &&
!at91_pm_verify_clocks())
goto error;
@@ -318,7 +363,7 @@
*/
static void at91_pm_end(void)
{
- at91_pm_config_ws(pm_data.mode, false);
+ at91_pm_config_ws(soc_pm.data.mode, false);
}
@@ -351,7 +396,7 @@
" str %2, [%1, %3]\n\t"
" mcr p15, 0, %0, c7, c0, 4\n\t"
:
- : "r" (0), "r" (pm_data.ramc[0]),
+ : "r" (0), "r" (soc_pm.data.ramc[0]),
"r" (1), "r" (AT91_MC_SDRAMC_SRR));
}
@@ -374,7 +419,7 @@
at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
}
- if (pm_data.ramc[1]) {
+ if (soc_pm.data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
@@ -392,14 +437,14 @@
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (pm_data.ramc[1])
+ if (soc_pm.data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (pm_data.ramc[1]) {
+ if (soc_pm.data.ramc[1]) {
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
@@ -429,7 +474,7 @@
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (pm_data.ramc[1]) {
+ if (soc_pm.data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -441,13 +486,13 @@
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (pm_data.ramc[1])
+ if (soc_pm.data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (pm_data.ramc[1])
+ if (soc_pm.data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
@@ -480,14 +525,14 @@
const struct ramc_info *ramc;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
- pm_data.ramc[idx] = of_iomap(np, 0);
- if (!pm_data.ramc[idx])
+ soc_pm.data.ramc[idx] = of_iomap(np, 0);
+ if (!soc_pm.data.ramc[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
ramc = of_id->data;
if (!standby)
standby = ramc->idle;
- pm_data.memctrl = ramc->memctrl;
+ soc_pm.data.memctrl = ramc->memctrl;
idx++;
}
@@ -509,12 +554,17 @@
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
- writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
+}
+
+static void at91sam9x60_idle(void)
+{
+ cpu_do_idle();
}
static void at91sam9_idle(void)
{
- writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
cpu_do_idle();
}
@@ -566,8 +616,8 @@
static bool __init at91_is_pm_mode_active(int pm_mode)
{
- return (pm_data.standby_mode == pm_mode ||
- pm_data.suspend_mode == pm_mode);
+ return (soc_pm.data.standby_mode == pm_mode ||
+ soc_pm.data.suspend_mode == pm_mode);
}
static int __init at91_pm_backup_init(void)
@@ -577,30 +627,30 @@
struct platform_device *pdev = NULL;
int ret = -ENODEV;
+ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+ return -EPERM;
+
if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
return 0;
- pm_bu = NULL;
-
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
if (!np) {
pr_warn("%s: failed to find sfrbu!\n", __func__);
return ret;
}
- pm_data.sfrbu = of_iomap(np, 0);
+ soc_pm.data.sfrbu = of_iomap(np, 0);
of_node_put(np);
- pm_bu = NULL;
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
if (!np)
- goto securam_fail;
+ goto securam_fail_no_ref_dev;
pdev = of_find_device_by_node(np);
of_node_put(np);
if (!pdev) {
pr_warn("%s: failed to find securam device!\n", __func__);
- goto securam_fail;
+ goto securam_fail_no_ref_dev;
}
sram_pool = gen_pool_get(&pdev->dev, NULL);
@@ -623,8 +673,10 @@
return 0;
securam_fail:
- iounmap(pm_data.sfrbu);
- pm_data.sfrbu = NULL;
+ put_device(&pdev->dev);
+securam_fail_no_ref_dev:
+ iounmap(soc_pm.data.sfrbu);
+ soc_pm.data.sfrbu = NULL;
return ret;
}
@@ -633,10 +685,10 @@
if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
return;
- if (pm_data.standby_mode == pm_mode)
- pm_data.standby_mode = AT91_PM_ULP0;
- if (pm_data.suspend_mode == pm_mode)
- pm_data.suspend_mode = AT91_PM_ULP0;
+ if (soc_pm.data.standby_mode == pm_mode)
+ soc_pm.data.standby_mode = AT91_PM_ULP0;
+ if (soc_pm.data.suspend_mode == pm_mode)
+ soc_pm.data.suspend_mode = AT91_PM_ULP0;
}
static void __init at91_pm_modes_init(void)
@@ -654,7 +706,7 @@
goto ulp1_default;
}
- pm_data.shdwc = of_iomap(np, 0);
+ soc_pm.data.shdwc = of_iomap(np, 0);
of_node_put(np);
ret = at91_pm_backup_init();
@@ -668,8 +720,8 @@
return;
unmap:
- iounmap(pm_data.shdwc);
- pm_data.shdwc = NULL;
+ iounmap(soc_pm.data.shdwc);
+ soc_pm.data.shdwc = NULL;
ulp1_default:
at91_pm_use_default_mode(AT91_PM_ULP1);
backup_default:
@@ -712,14 +764,14 @@
platform_device_register(&at91_cpuidle_device);
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
- pm_data.pmc = of_iomap(pmc_np, 0);
- if (!pm_data.pmc) {
+ soc_pm.data.pmc = of_iomap(pmc_np, 0);
+ if (!soc_pm.data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
}
pmc = of_id->data;
- pm_data.uhp_udp_mask = pmc->uhp_udp_mask;
+ soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
if (pm_idle)
arm_pm_idle = pm_idle;
@@ -729,8 +781,8 @@
if (at91_suspend_sram_fn) {
suspend_set_ops(&at91_pm_ops);
pr_info("AT91: PM: standby: %s, suspend: %s\n",
- pm_modes[pm_data.standby_mode].pattern,
- pm_modes[pm_data.suspend_mode].pattern);
+ pm_modes[soc_pm.data.standby_mode].pattern,
+ pm_modes[soc_pm.data.suspend_mode].pattern);
} else {
pr_info("AT91: PM not supported, due to no SRAM allocated\n");
}
@@ -751,6 +803,19 @@
at91_pm_init(at91rm9200_idle);
}
+void __init sam9x60_pm_init(void)
+{
+ if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+ return;
+
+ at91_pm_modes_init();
+ at91_dt_ramc();
+ at91_pm_init(at91sam9x60_idle);
+
+ soc_pm.ws_ids = sam9x60_ws_ids;
+ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+}
+
void __init at91sam9_pm_init(void)
{
if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
@@ -776,6 +841,10 @@
at91_pm_modes_init();
sama5_pm_init();
+
+ soc_pm.ws_ids = sama5d2_ws_ids;
+ soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
+ soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
}
static int __init at91_pm_modes_select(char *str)
@@ -796,8 +865,8 @@
if (suspend < 0)
return 0;
- pm_data.standby_mode = standby;
- pm_data.suspend_mode = suspend;
+ soc_pm.data.standby_mode = standby;
+ soc_pm.data.suspend_mode = suspend;
return 0;
}
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 9bd4e6c..9fa4f48 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* AT91 Power Management
*
* Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef __ARCH_ARM_MACH_AT91_PM
#define __ARCH_ARM_MACH_AT91_PM
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index a7c6ae1..ed57c87 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* arch/arm/mach-at91/pm_slow_clock.S
*
@@ -5,16 +6,11 @@
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include "pm.h"
-#include "generated/at91_pm_data-offsets.h"
+#include "pm_data-offsets.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
@@ -51,15 +47,6 @@
.endm
/*
- * Wait until PLLA has locked.
- */
- .macro wait_pllalock
-1: ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_LOCKA
- beq 1b
- .endm
-
-/*
* Put the processor to enter the idle state
*/
.macro at91_cpu_idle
@@ -149,6 +136,14 @@
ENDPROC(at91_pm_suspend_in_sram)
ENTRY(at91_backup_mode)
+ /* Switch the master clock source to slow clock. */
+ ldr pmc, .pmc_base
+ ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, #AT91_PMC_MCKR]
+
+ wait_mckrdy
+
/*BUMEN*/
ldr r0, .sfr
mov tmp1, #0x1
@@ -170,11 +165,46 @@
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
+ /* Save RC oscillator state */
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ str tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 1f
+
+ /* Turn off RC oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC disabled done */
+2: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 2b
+
/* Wait for interrupt */
- at91_cpu_idle
+1: at91_cpu_idle
+
+ /* Restore RC oscillator state */
+ ldr tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 4f
+
+ /* Turn on RC oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC stabilization */
+3: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 3b
/* Turn on the crystal oscillator */
- ldr tmp1, [pmc, #AT91_CKGR_MOR]
+4: ldr tmp1, [pmc, #AT91_CKGR_MOR]
orr tmp1, tmp1, #AT91_PMC_MOSCEN
orr tmp1, tmp1, #AT91_PMC_KEY
str tmp1, [pmc, #AT91_CKGR_MOR]
@@ -189,8 +219,26 @@
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
- /* Switch the main clock source to 12-MHz RC oscillator */
+ /* Save RC oscillator state and check if it is enabled. */
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ str tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 2f
+
+ /* Enable RC oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait main RC stabilization */
+1: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ beq 1b
+
+ /* Switch the main clock source to 12-MHz RC oscillator */
+2: ldr tmp1, [pmc, #AT91_CKGR_MOR]
bic tmp1, tmp1, #AT91_PMC_MOSCSEL
bic tmp1, tmp1, #AT91_PMC_KEY_MASK
orr tmp1, tmp1, #AT91_PMC_KEY
@@ -254,6 +302,25 @@
str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
+
+ /* Restore RC oscillator state */
+ ldr tmp1, .saved_osc_status
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 3f
+
+ /* Disable RC oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCRCEN
+ bic tmp1, tmp1, #AT91_PMC_KEY_MASK
+ orr tmp1, tmp1, #AT91_PMC_KEY
+ str tmp1, [pmc, #AT91_CKGR_MOR]
+
+ /* Wait RC oscillator disable done */
+4: ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCRCS
+ bne 4b
+
+3:
.endm
ENTRY(at91_ulp_mode)
@@ -271,14 +338,6 @@
wait_mckrdy
- /* Save PLLA setting and disable it */
- ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
- str tmp1, .saved_pllar
-
- mov tmp1, #AT91_PMC_PLLCOUNT
- orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
- str tmp1, [pmc, #AT91_CKGR_PLLAR]
-
ldr r0, .pm_mode
cmp r0, #AT91_PM_ULP1
beq ulp1_mode
@@ -293,18 +352,6 @@
ulp_exit:
ldr pmc, .pmc_base
- /* Restore PLLA setting */
- ldr tmp1, .saved_pllar
- str tmp1, [pmc, #AT91_CKGR_PLLAR]
-
- tst tmp1, #(AT91_PMC_MUL & 0xff0000)
- bne 3f
- tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
- beq 4f
-3:
- wait_pllalock
-4:
-
/*
* Restore master clock setting
*/
@@ -457,8 +504,6 @@
.word 0
.saved_mckr:
.word 0
-.saved_pllar:
- .word 0
.saved_sam9_lpr:
.word 0
.saved_sam9_lpr1:
@@ -467,6 +512,8 @@
.word 0
.saved_sam9_mdr1:
.word 0
+.saved_osc_status:
+ .word 0
ENTRY(at91_pm_suspend_in_sram_sz)
.word .-at91_pm_suspend_in_sram
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 3d0bf95..89dab7c 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Setup code for SAMA5
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/of.h>
diff --git a/arch/arm/mach-at91/samv7.c b/arch/arm/mach-at91/samv7.c
index 11386f1..28f998f 100644
--- a/arch/arm/mach-at91/samv7.c
+++ b/arch/arm/mach-at91/samv7.c
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Setup code for SAMv7x
*
* Copyright (C) 2013 Atmel,
* 2016 Andras Szemzo <szemzo.andras@gmail.com>
- *
- * Licensed under GPLv2 or later.
*/
#include <linux/of.h>
#include <linux/of_platform.h>