Update Linux to v5.4.2
Change-Id: Idf6911045d9d382da2cfe01b1edff026404ac8fd
diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c
new file mode 100644
index 0000000..2f332ec
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i3c
@@ -0,0 +1,146 @@
+What: /sys/bus/i3c/devices/i3c-<bus-id>
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ An I3C bus. This directory will contain one sub-directory per
+ I3C device present on the bus.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/current_master
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ Expose the master that owns the bus (<bus-id>-<master-pid>) at
+ the time this file is read. Note that bus ownership can change
+ overtime, so there's no guarantee that when the read() call
+ returns, the value returned is still valid.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/mode
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ I3C bus mode. Can be "pure", "mixed-fast" or "mixed-slow". See
+ the I3C specification for a detailed description of what each
+ of these modes implies.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/i3c_scl_frequency
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ The frequency (expressed in Hz) of the SCL signal when
+ operating in I3C SDR mode.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/i2c_scl_frequency
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ The frequency (expressed in Hz) of the SCL signal when
+ operating in I2C mode.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/dynamic_address
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ Dynamic address assigned to the master controller. This
+ address may change if the bus is re-initialized.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/bcr
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ BCR stands for Bus Characteristics Register and express the
+ device capabilities in term of speed, maximum read/write
+ length, etc. See the I3C specification for more details.
+ This entry describes the BCR of the master controller driving
+ the bus.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/dcr
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ DCR stands for Device Characteristics Register and express the
+ device capabilities in term of exposed features. See the I3C
+ specification for more details.
+ This entry describes the DCR of the master controller driving
+ the bus.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/pid
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ PID stands for Provisional ID and is used to uniquely identify
+ a device on a bus. This PID contains information about the
+ vendor, the part and an instance ID so that several devices of
+ the same type can be connected on the same bus.
+ See the I3C specification for more details.
+ This entry describes the PID of the master controller driving
+ the bus.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/hdrcap
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ Expose the HDR (High Data Rate) capabilities of a device.
+ Returns a list of supported HDR mode, each element is separated
+ by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+ See the I3C specification for more details about these HDR
+ modes.
+ This entry describes the HDRCAP of the master controller
+ driving the bus.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ An I3C device present on I3C bus identified by <bus-id>. Note
+ that all devices are represented including the master driving
+ the bus.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dynamic_address
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ Dynamic address assigned to device <bus-id>-<device-pid>. This
+ address may change if the bus is re-initialized.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/bcr
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ BCR stands for Bus Characteristics Register and express the
+ device capabilities in term of speed, maximum read/write
+ length, etc. See the I3C specification for more details.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/dcr
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ DCR stands for Device Characteristics Register and express the
+ device capabilities in term of exposed features. See the I3C
+ specification for more details.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ PID stands for Provisional ID and is used to uniquely identify
+ a device on a bus. This PID contains information about the
+ vendor, the part and an instance ID so that several devices of
+ the same type can be connected on the same bus.
+ See the I3C specification for more details.
+
+What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/hdrcap
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ Expose the HDR (High Data Rate) capabilities of a device.
+ Returns a list of supported HDR mode, each element is separated
+ by space. Modes can be "hdr-ddr", "hdr-tsp" and "hdr-tsl".
+ See the I3C specification for more details about these HDR
+ modes.
+
+What: /sys/bus/i3c/devices/<bus-id>-<device-pid>
+KernelVersion: 5.0
+Contact: linux-i3c@vger.kernel.org
+Description:
+ These directories are just symbolic links to
+ /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>.