Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/sound/usb/format.c b/sound/usb/format.c
index d79db71..84b66f7 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -40,6 +40,8 @@
case UAC_VERSION_1:
default: {
struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
+ if (format >= 64)
+ return 0; /* invalid format */
sample_width = fmt->bBitResolution;
sample_bytes = fmt->bSubframeSize;
format = 1ULL << format;
@@ -193,9 +195,11 @@
continue;
/* C-Media CM6501 mislabels its 96 kHz altsetting */
/* Terratec Aureon 7.1 USB C-Media 6206, too */
+ /* Ozone Z90 USB C-Media, too */
if (rate == 48000 && nr_rates == 1 &&
(chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
chip->usb_id == USB_ID(0x0d8c, 0x0102) ||
+ chip->usb_id == USB_ID(0x0d8c, 0x0078) ||
chip->usb_id == USB_ID(0x0ccd, 0x00b1)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
@@ -227,6 +231,52 @@
}
/*
+ * Many Focusrite devices supports a limited set of sampling rates per
+ * altsetting. Maximum rate is exposed in the last 4 bytes of Format Type
+ * descriptor which has a non-standard bLength = 10.
+ */
+static bool focusrite_valid_sample_rate(struct snd_usb_audio *chip,
+ struct audioformat *fp,
+ unsigned int rate)
+{
+ struct usb_interface *iface;
+ struct usb_host_interface *alts;
+ unsigned char *fmt;
+ unsigned int max_rate;
+
+ iface = usb_ifnum_to_if(chip->dev, fp->iface);
+ if (!iface)
+ return true;
+
+ alts = &iface->altsetting[fp->altset_idx];
+ fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen,
+ NULL, UAC_FORMAT_TYPE);
+ if (!fmt)
+ return true;
+
+ if (fmt[0] == 10) { /* bLength */
+ max_rate = combine_quad(&fmt[6]);
+
+ /* Validate max rate */
+ if (max_rate != 48000 &&
+ max_rate != 96000 &&
+ max_rate != 192000 &&
+ max_rate != 384000) {
+
+ usb_audio_info(chip,
+ "%u:%d : unexpected max rate: %u\n",
+ fp->iface, fp->altsetting, max_rate);
+
+ return true;
+ }
+
+ return rate <= max_rate;
+ }
+
+ return true;
+}
+
+/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
* get to know how many sample rates we have to expect.
@@ -262,6 +312,11 @@
}
for (rate = min; rate <= max; rate += res) {
+ /* Filter out invalid rates on Focusrite devices */
+ if (USB_ID_VENDOR(chip->usb_id) == 0x1235 &&
+ !focusrite_valid_sample_rate(chip, fp, rate))
+ goto skip_rate;
+
if (fp->rate_table)
fp->rate_table[nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
@@ -276,6 +331,7 @@
break;
}
+skip_rate:
/* avoid endless loop */
if (res == 0)
break;
@@ -296,6 +352,9 @@
case USB_ID(0x0E41, 0x4242): /* Line6 Helix Rack */
case USB_ID(0x0E41, 0x4244): /* Line6 Helix LT */
case USB_ID(0x0E41, 0x4246): /* Line6 HX-Stomp */
+ case USB_ID(0x0E41, 0x4248): /* Line6 Helix >= fw 2.82 */
+ case USB_ID(0x0E41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */
+ case USB_ID(0x0E41, 0x424a): /* Line6 Helix LT >= fw 2.82 */
/* supported rates: 48Khz */
kfree(fp->rate_table);
fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL);
@@ -322,8 +381,7 @@
struct usb_device *dev = chip->dev;
unsigned char tmp[2], *data;
int nr_triplets, data_size, ret = 0, ret_l6;
- int clock = snd_usb_clock_find_source(chip, fp->protocol,
- fp->clock, false);
+ int clock = snd_usb_clock_find_source(chip, fp, false);
if (clock < 0) {
dev_err(&dev->dev,