Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 81afe55..f29fbad 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1313,19 +1313,20 @@
if (num_packets > max_hc_pkt_count) {
num_packets = max_hc_pkt_count;
chan->xfer_len = num_packets * chan->max_packet;
+ } else if (chan->ep_is_in) {
+ /*
+ * Always program an integral # of max packets
+ * for IN transfers.
+ * Note: This assumes that the input buffer is
+ * aligned and sized accordingly.
+ */
+ chan->xfer_len = num_packets * chan->max_packet;
}
} else {
/* Need 1 packet for transfer length of 0 */
num_packets = 1;
}
- if (chan->ep_is_in)
- /*
- * Always program an integral # of max packets for IN
- * transfers
- */
- chan->xfer_len = num_packets * chan->max_packet;
-
if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
chan->ep_type == USB_ENDPOINT_XFER_ISOC)
/*
@@ -4321,7 +4322,8 @@
if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
goto unlock;
- if (hsotg->params.power_down > DWC2_POWER_DOWN_PARAM_PARTIAL)
+ if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL ||
+ hsotg->flags.b.port_connect_status == 0)
goto skip_power_saving;
/*
@@ -5397,7 +5399,7 @@
dwc2_writel(hsotg, hprt0, HPRT0);
/* Wait for the HPRT0.PrtSusp register field to be set */
- if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
+ if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000))
dev_warn(hsotg->dev, "Suspend wasn't generated\n");
/*
@@ -5578,7 +5580,15 @@
return ret;
}
- dwc2_hcd_rem_wakeup(hsotg);
+ if (rem_wakeup) {
+ dwc2_hcd_rem_wakeup(hsotg);
+ /*
+ * Change "port_connect_status_change" flag to re-enumerate,
+ * because after exit from hibernation port connection status
+ * is not detected.
+ */
+ hsotg->flags.b.port_connect_status_change = 1;
+ }
hsotg->hibernated = 0;
hsotg->bus_suspended = 0;