Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 70afb2c..de7bb8e 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -58,6 +58,9 @@
#define WDM_MAX 16
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT (30 * HZ)
+
/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
#define WDM_DEFAULT_BUFSIZE 256
@@ -151,7 +154,7 @@
kfree(desc->outbuf);
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
- wake_up(&desc->wait);
+ wake_up_all(&desc->wait);
}
static void wdm_in_callback(struct urb *urb)
@@ -318,12 +321,23 @@
}
-static void kill_urbs(struct wdm_device *desc)
+static void poison_urbs(struct wdm_device *desc)
{
/* the order here is essential */
- usb_kill_urb(desc->command);
- usb_kill_urb(desc->validity);
- usb_kill_urb(desc->response);
+ usb_poison_urb(desc->command);
+ usb_poison_urb(desc->validity);
+ usb_poison_urb(desc->response);
+}
+
+static void unpoison_urbs(struct wdm_device *desc)
+{
+ /*
+ * the order here is not essential
+ * it is symmetrical just to be nice
+ */
+ usb_unpoison_urb(desc->response);
+ usb_unpoison_urb(desc->validity);
+ usb_unpoison_urb(desc->command);
}
static void free_urbs(struct wdm_device *desc)
@@ -393,6 +407,9 @@
if (test_bit(WDM_RESETTING, &desc->flags))
r = -EIO;
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ r = -ENODEV;
+
if (r < 0) {
rv = r;
goto out_free_mem_pm;
@@ -424,6 +441,7 @@
if (rv < 0) {
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
+ wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
rv = usb_translate_errors(rv);
goto out_free_mem_pm;
@@ -458,13 +476,23 @@
if (!desc->resp_count || !--desc->resp_count)
goto out;
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out;
+ }
+ if (test_bit(WDM_RESETTING, &desc->flags)) {
+ rv = -EIO;
+ goto out;
+ }
+
set_bit(WDM_RESPONDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
rv = usb_submit_urb(desc->response, GFP_KERNEL);
spin_lock_irq(&desc->iuspin);
if (rv) {
- dev_err(&desc->intf->dev,
- "usb_submit_urb failed with result %d\n", rv);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ dev_err(&desc->intf->dev,
+ "usb_submit_urb failed with result %d\n", rv);
/* make sure the next notification trigger a submit */
clear_bit(WDM_RESPONDING, &desc->flags);
@@ -583,28 +611,58 @@
return rv;
}
-static int wdm_flush(struct file *file, fl_owner_t id)
+static int wdm_wait_for_response(struct file *file, long timeout)
{
struct wdm_device *desc = file->private_data;
+ long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
- wait_event(desc->wait,
- /*
- * needs both flags. We cannot do with one
- * because resetting it would cause a race
- * with write() yet we need to signal
- * a disconnect
- */
- !test_bit(WDM_IN_USE, &desc->flags) ||
- test_bit(WDM_DISCONNECTING, &desc->flags));
+ /*
+ * Needs both flags. We cannot do with one because resetting it would
+ * cause a race with write() yet we need to signal a disconnect.
+ */
+ rv = wait_event_interruptible_timeout(desc->wait,
+ !test_bit(WDM_IN_USE, &desc->flags) ||
+ test_bit(WDM_DISCONNECTING, &desc->flags),
+ timeout);
- /* cannot dereference desc->intf if WDM_DISCONNECTING */
+ /*
+ * To report the correct error. This is best effort.
+ * We are inevitably racing with the hardware.
+ */
if (test_bit(WDM_DISCONNECTING, &desc->flags))
return -ENODEV;
- if (desc->werr < 0)
- dev_err(&desc->intf->dev, "Error in flush path: %d\n",
- desc->werr);
+ if (!rv)
+ return -EIO;
+ if (rv < 0)
+ return -EINTR;
- return usb_translate_errors(desc->werr);
+ spin_lock_irq(&desc->iuspin);
+ rv = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+
+ return usb_translate_errors(rv);
+
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+ return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
+
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
}
static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -694,11 +752,12 @@
if (!desc->count) {
if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
- kill_urbs(desc);
+ poison_urbs(desc);
spin_lock_irq(&desc->iuspin);
desc->resp_count = 0;
spin_unlock_irq(&desc->iuspin);
desc->manage_power(desc->intf, 0);
+ unpoison_urbs(desc);
} else {
/* must avoid dev_printk here as desc->intf is invalid */
pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__);
@@ -729,6 +788,7 @@
.owner = THIS_MODULE,
.read = wdm_read,
.write = wdm_write,
+ .fsync = wdm_fsync,
.open = wdm_open,
.flush = wdm_flush,
.release = wdm_release,
@@ -988,7 +1048,7 @@
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
mutex_unlock(&desc->wlock);
@@ -1031,9 +1091,10 @@
set_bit(WDM_SUSPENDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
/* callback submits work - order is essential */
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
+ unpoison_urbs(desc);
}
if (!PMSG_IS_AUTO(message)) {
mutex_unlock(&desc->wlock);
@@ -1091,7 +1152,7 @@
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
return 0;
@@ -1102,6 +1163,7 @@
struct wdm_device *desc = wdm_find_device(intf);
int rv;
+ unpoison_urbs(desc);
clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);