Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a8dc8af..8a909d5 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -574,7 +574,8 @@
atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
if (atmel_uart_is_half_duplex(port))
- atmel_start_rx(port);
+ if (!atomic_read(&atmel_port->tasklet_shutdown))
+ atmel_start_rx(port);
}
@@ -2270,27 +2271,6 @@
mode |= ATMEL_US_USMODE_NORMAL;
}
- /* set the mode, clock divisor, parity, stop bits and data size */
- atmel_uart_writel(port, ATMEL_US_MR, mode);
-
- /*
- * when switching the mode, set the RTS line state according to the
- * new mode, otherwise keep the former state
- */
- if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
- unsigned int rts_state;
-
- if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
- /* let the hardware control the RTS line */
- rts_state = ATMEL_US_RTSDIS;
- } else {
- /* force RTS line to low level */
- rts_state = ATMEL_US_RTSEN;
- }
-
- atmel_uart_writel(port, ATMEL_US_CR, rts_state);
- }
-
/*
* Set the baud rate:
* Fractional baudrate allows to setup output frequency more
@@ -2317,6 +2297,28 @@
if (!(port->iso7816.flags & SER_ISO7816_ENABLED))
atmel_uart_writel(port, ATMEL_US_BRGR, quot);
+
+ /* set the mode, clock divisor, parity, stop bits and data size */
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
+
+ /*
+ * when switching the mode, set the RTS line state according to the
+ * new mode, otherwise keep the former state
+ */
+ if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+ unsigned int rts_state;
+
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* let the hardware control the RTS line */
+ rts_state = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to low level */
+ rts_state = ATMEL_US_RTSEN;
+ }
+
+ atmel_uart_writel(port, ATMEL_US_CR, rts_state);
+ }
+
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
atmel_port->tx_stopped = false;