Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 255786f..be503a0 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -223,6 +223,11 @@
for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
n;
n--, k_tmp++, u_tmp++) {
+ /* Ensure that also following allocations from rx_buf/tx_buf will meet
+ * DMA alignment requirements.
+ */
+ unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_KMALLOC_MINALIGN);
+
k_tmp->len = u_tmp->len;
total += k_tmp->len;
@@ -238,17 +243,17 @@
if (u_tmp->rx_buf) {
/* this transfer needs space in RX bounce buffer */
- rx_total += k_tmp->len;
+ rx_total += len_aligned;
if (rx_total > bufsiz) {
status = -EMSGSIZE;
goto done;
}
k_tmp->rx_buf = rx_buf;
- rx_buf += k_tmp->len;
+ rx_buf += len_aligned;
}
if (u_tmp->tx_buf) {
/* this transfer needs space in TX bounce buffer */
- tx_total += k_tmp->len;
+ tx_total += len_aligned;
if (tx_total > bufsiz) {
status = -EMSGSIZE;
goto done;
@@ -258,7 +263,7 @@
(uintptr_t) u_tmp->tx_buf,
u_tmp->len))
goto done;
- tx_buf += k_tmp->len;
+ tx_buf += len_aligned;
}
k_tmp->cs_change = !!u_tmp->cs_change;
@@ -290,16 +295,16 @@
goto done;
/* copy any rx data out of bounce buffer */
- rx_buf = spidev->rx_buffer;
- for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
+ for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
+ n;
+ n--, k_tmp++, u_tmp++) {
if (u_tmp->rx_buf) {
if (copy_to_user((u8 __user *)
- (uintptr_t) u_tmp->rx_buf, rx_buf,
+ (uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf,
u_tmp->len)) {
status = -EFAULT;
goto done;
}
- rx_buf += u_tmp->len;
}
}
status = total;
@@ -394,6 +399,7 @@
else
retval = get_user(tmp, (u32 __user *)arg);
if (retval == 0) {
+ struct spi_controller *ctlr = spi->controller;
u32 save = spi->mode;
if (tmp & ~SPI_MODE_MASK) {
@@ -401,6 +407,10 @@
break;
}
+ if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
+ ctlr->cs_gpiods[spi->chip_select])
+ tmp |= SPI_CS_HIGH;
+
tmp |= spi->mode & ~SPI_MODE_MASK;
spi->mode = (u16)tmp;
retval = spi_setup(spi);
@@ -600,15 +610,20 @@
static int spidev_release(struct inode *inode, struct file *filp)
{
struct spidev_data *spidev;
+ int dofree;
mutex_lock(&device_list_lock);
spidev = filp->private_data;
filp->private_data = NULL;
+ spin_lock_irq(&spidev->spi_lock);
+ /* ... after we unbound from the underlying device? */
+ dofree = (spidev->spi == NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+
/* last close? */
spidev->users--;
if (!spidev->users) {
- int dofree;
kfree(spidev->tx_buffer);
spidev->tx_buffer = NULL;
@@ -616,17 +631,15 @@
kfree(spidev->rx_buffer);
spidev->rx_buffer = NULL;
- spin_lock_irq(&spidev->spi_lock);
- if (spidev->spi)
- spidev->speed_hz = spidev->spi->max_speed_hz;
-
- /* ... after we unbound from the underlying device? */
- dofree = (spidev->spi == NULL);
- spin_unlock_irq(&spidev->spi_lock);
-
if (dofree)
kfree(spidev);
+ else
+ spidev->speed_hz = spidev->spi->max_speed_hz;
}
+#ifdef CONFIG_SPI_SLAVE
+ if (!dofree)
+ spi_slave_abort(spidev->spi);
+#endif
mutex_unlock(&device_list_lock);
return 0;
@@ -775,13 +788,13 @@
{
struct spidev_data *spidev = spi_get_drvdata(spi);
+ /* prevent new opens */
+ mutex_lock(&device_list_lock);
/* make sure ops on existing fds can abort cleanly */
spin_lock_irq(&spidev->spi_lock);
spidev->spi = NULL;
spin_unlock_irq(&spidev->spi_lock);
- /* prevent new opens */
- mutex_lock(&device_list_lock);
list_del(&spidev->device_entry);
device_destroy(spidev_class, spidev->devt);
clear_bit(MINOR(spidev->devt), minors);