Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 9a49e07..c2f9694 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -128,11 +128,20 @@
{
struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
struct chip_data *chip = spi_get_ctldata(spi);
+ bool cs_high = !!(spi->mode & SPI_CS_HIGH);
+ /* Chip select logic is inverted from spi_set_cs() */
if (chip && chip->cs_control)
- chip->cs_control(enable);
+ chip->cs_control(!enable);
- if (enable)
+ /*
+ * DW SPI controller demands any native CS being set in order to
+ * proceed with data transfer. So in order to activate the SPI
+ * communications we must set a corresponding bit in the Slave
+ * Enable register no matter whether the SPI core is configured to
+ * support active-high or active-low CS level.
+ */
+ if (cs_high == enable)
dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
else if (dws->cs_override)
dw_writel(dws, DW_SPI_SER, 0);
@@ -171,9 +180,11 @@
static void dw_writer(struct dw_spi *dws)
{
- u32 max = tx_max(dws);
+ u32 max;
u16 txw = 0;
+ spin_lock(&dws->buf_lock);
+ max = tx_max(dws);
while (max--) {
/* Set the tx word if the transfer's original "tx" is not null */
if (dws->tx_end - dws->len) {
@@ -185,13 +196,16 @@
dw_write_io_reg(dws, DW_SPI_DR, txw);
dws->tx += dws->n_bytes;
}
+ spin_unlock(&dws->buf_lock);
}
static void dw_reader(struct dw_spi *dws)
{
- u32 max = rx_max(dws);
+ u32 max;
u16 rxw;
+ spin_lock(&dws->buf_lock);
+ max = rx_max(dws);
while (max--) {
rxw = dw_read_io_reg(dws, DW_SPI_DR);
/* Care rx only if the transfer's original "rx" is not null */
@@ -203,6 +217,7 @@
}
dws->rx += dws->n_bytes;
}
+ spin_unlock(&dws->buf_lock);
}
static void int_error_stop(struct dw_spi *dws, const char *msg)
@@ -275,18 +290,23 @@
{
struct dw_spi *dws = spi_controller_get_devdata(master);
struct chip_data *chip = spi_get_ctldata(spi);
+ unsigned long flags;
u8 imask = 0;
u16 txlevel = 0;
u32 cr0;
int ret;
dws->dma_mapped = 0;
-
+ spin_lock_irqsave(&dws->buf_lock, flags);
dws->tx = (void *)transfer->tx_buf;
dws->tx_end = dws->tx + transfer->len;
dws->rx = transfer->rx_buf;
dws->rx_end = dws->rx + transfer->len;
dws->len = transfer->len;
+ spin_unlock_irqrestore(&dws->buf_lock, flags);
+
+ /* Ensure dw->rx and dw->rx_end are visible */
+ smp_mb();
spi_enable_chip(dws, 0);
@@ -308,7 +328,8 @@
cr0 = (transfer->bits_per_word - 1)
| (chip->type << SPI_FRF_OFFSET)
| ((((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET) |
- (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET))
+ (((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET) |
+ (((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET))
| (chip->tmode << SPI_TMOD_OFFSET);
/*
@@ -360,11 +381,8 @@
spi_enable_chip(dws, 1);
- if (dws->dma_mapped) {
- ret = dws->dma_ops->dma_transfer(dws, transfer);
- if (ret < 0)
- return ret;
- }
+ if (dws->dma_mapped)
+ return dws->dma_ops->dma_transfer(dws, transfer);
if (chip->poll_mode)
return poll_transfer(dws);
@@ -469,6 +487,7 @@
dws->type = SSI_MOTO_SPI;
dws->dma_inited = 0;
dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
+ spin_lock_init(&dws->buf_lock);
spi_controller_set_devdata(master, dws);
@@ -507,10 +526,11 @@
dws->dma_inited = 0;
} else {
master->can_dma = dws->dma_ops->can_dma;
+ master->flags |= SPI_CONTROLLER_MUST_TX;
}
}
- ret = devm_spi_register_controller(dev, master);
+ ret = spi_register_controller(master);
if (ret) {
dev_err(&master->dev, "problem registering spi master\n");
goto err_dma_exit;
@@ -534,6 +554,8 @@
{
dw_spi_debugfs_remove(dws);
+ spi_unregister_controller(dws->master);
+
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);