Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index 42bc515..febe0ae 100644
--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -80,7 +80,7 @@
if (readl_relaxed(addr) & mask)
return 0;
- usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
} while (!time_after(jiffies, timeout));
return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT;
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 39e8deb..5ddbf9a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -66,7 +66,7 @@
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
-#define PHY_INIT_COMPLETE_TIMEOUT 1000
+#define PHY_INIT_COMPLETE_TIMEOUT 10000
#define POWER_DOWN_DELAY_US_MIN 10
#define POWER_DOWN_DELAY_US_MAX 11
@@ -402,8 +402,8 @@
QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
@@ -429,7 +429,6 @@
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
- QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
@@ -438,7 +437,6 @@
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
- QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
};
static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
@@ -446,6 +444,8 @@
QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
};
static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
@@ -456,7 +456,6 @@
QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
- QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
};
static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
@@ -1107,6 +1106,9 @@
.pwrdn_ctrl = SW_PWRDN,
};
+static const char * const ipq8074_pciephy_clk_l[] = {
+ "aux", "cfg_ahb",
+};
/* list of resets */
static const char * const ipq8074_pciephy_reset_l[] = {
"phy", "common",
@@ -1124,8 +1126,8 @@
.rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
.pcs_tbl = ipq8074_pcie_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
- .clk_list = NULL,
- .num_clks = 0,
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
.reset_list = ipq8074_pciephy_reset_l,
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 335ea5d..f6b1e63 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -77,6 +77,8 @@
#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc
/* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_EMP_POST1_LVL 0x018
+#define QSERDES_TX_SLEW_CNTL 0x040
#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054
#define QSERDES_TX_DEBUG_BUS_SEL 0x064
#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index b163b3a..6105427 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -158,8 +158,8 @@
/* setup initial state */
qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
uphy->vbus_edev);
- ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
- EXTCON_USB, &uphy->vbus_notify);
+ ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+ &uphy->vbus_notify);
if (ret)
goto err_ulpi;
}
@@ -180,6 +180,9 @@
{
struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+ if (uphy->vbus_edev)
+ extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+ &uphy->vbus_notify);
regulator_disable(uphy->v3p3);
regulator_disable(uphy->v1p8);
clk_disable_unprepare(uphy->sleep_clk);