Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ccb9da8..3ef7b5a 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -31,6 +31,7 @@
#define MT7530_MFC 0x10
#define BC_FFP(x) (((x) & 0xff) << 24)
#define UNM_FFP(x) (((x) & 0xff) << 16)
+#define UNM_FFP_MASK UNM_FFP(~0)
#define UNU_FFP(x) (((x) & 0xff) << 8)
#define UNU_FFP_MASK UNU_FFP(~0)
#define CPU_EN BIT(7)
@@ -147,6 +148,12 @@
/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
+ /* Fallback Mode: Forward received frames with ingress ports that do
+ * not belong to the VLAN member. Frames whose VID is not listed on
+ * the VLAN table are forwarded by the PCR_MATRIX members.
+ */
+ MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
/* Security Mode: Discard any frame due to ingress membership
* violation or VID missed on the VLAN table.
*/
@@ -167,9 +174,16 @@
/* Register for port vlan control */
#define MT7530_PVC_P(x) (0x2010 + ((x) * 0x100))
#define PORT_SPEC_TAG BIT(5)
+#define PVC_EG_TAG(x) (((x) & 0x7) << 8)
+#define PVC_EG_TAG_MASK PVC_EG_TAG(7)
#define VLAN_ATTR(x) (((x) & 0x3) << 6)
#define VLAN_ATTR_MASK VLAN_ATTR(3)
+enum mt7530_vlan_port_eg_tag {
+ MT7530_VLAN_EG_DISABLED = 0,
+ MT7530_VLAN_EG_CONSISTENT = 1,
+};
+
enum mt7530_vlan_port_attr {
MT7530_VLAN_USER = 0,
MT7530_VLAN_TRANSPARENT = 3,
@@ -268,7 +282,6 @@
/* Registers for TRGMII on the both side */
#define MT7530_TRGMII_RCK_CTRL 0x7a00
-#define GSW_TRGMII_RCK_CTRL 0x300
#define RX_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define DQSI1_TAP_MASK (0x7f << 8)
@@ -277,31 +290,24 @@
#define DQSI0_TAP(x) ((x) & 0x7f)
#define MT7530_TRGMII_RCK_RTT 0x7a04
-#define GSW_TRGMII_RCK_RTT 0x304
#define DQS1_GATE BIT(31)
#define DQS0_GATE BIT(30)
#define MT7530_TRGMII_RD(x) (0x7a10 + (x) * 8)
-#define GSW_TRGMII_RD(x) (0x310 + (x) * 8)
#define BSLIP_EN BIT(31)
#define EDGE_CHK BIT(30)
#define RD_TAP_MASK 0x7f
#define RD_TAP(x) ((x) & 0x7f)
-#define GSW_TRGMII_TXCTRL 0x340
#define MT7530_TRGMII_TXCTRL 0x7a40
#define TRAIN_TXEN BIT(31)
#define TXC_INV BIT(30)
#define TX_RST BIT(28)
#define MT7530_TRGMII_TD_ODT(i) (0x7a54 + 8 * (i))
-#define GSW_TRGMII_TD_ODT(i) (0x354 + 8 * (i))
#define TD_DM_DRVP(x) ((x) & 0xf)
#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
-#define GSW_INTF_MODE 0x390
-#define INTF_MODE_TRGMII BIT(1)
-
#define MT7530_TRGMII_TCK_CTRL 0x7a78
#define TCK_TAP(x) (((x) & 0xf) << 8)
@@ -434,7 +440,6 @@
* @ds: The pointer to the dsa core structure
* @bus: The bus used for the device and built-in PHY
* @rstc: The pointer to reset control used by MCM
- * @ethernet: The regmap used for access TRGMII-based registers
* @core_pwr: The power supplied into the core
* @io_pwr: The power supplied into the I/O
* @reset: The descriptor for GPIO line tied to its reset pin
@@ -451,7 +456,6 @@
struct dsa_switch *ds;
struct mii_bus *bus;
struct reset_control *rstc;
- struct regmap *ethernet;
struct regulator *core_pwr;
struct regulator *io_pwr;
struct gpio_desc *reset;