Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 50ffc63..0370e71 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -973,23 +973,6 @@
PORT_MIRROR_SNIFFER, false);
}
-static void ksz9477_phy_setup(struct ksz_device *dev, int port,
- struct phy_device *phy)
-{
- /* Only apply to port with PHY. */
- if (port >= dev->phy_port_cnt)
- return;
-
- /* The MAC actually cannot run in 1000 half-duplex mode. */
- phy_remove_link_mode(phy,
- ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-
- /* PHY does not support gigabit. */
- if (!(dev->features & GBIT_SUPPORT))
- phy_remove_link_mode(phy,
- ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
-}
-
static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
{
bool gbit;
@@ -1537,6 +1520,7 @@
.num_statics = 16,
.cpu_ports = 0x7F, /* can be configured as cpu port */
.port_cnt = 7, /* total physical port count */
+ .phy_errata_9477 = true,
},
};
@@ -1587,6 +1571,9 @@
return -ENOMEM;
}
+ /* set the real number of ports */
+ dev->ds->num_ports = dev->port_cnt;
+
return 0;
}
@@ -1599,7 +1586,6 @@
.get_port_addr = ksz9477_get_port_addr,
.cfg_port_member = ksz9477_cfg_port_member,
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
- .phy_setup = ksz9477_phy_setup,
.port_setup = ksz9477_port_setup,
.r_mib_cnt = ksz9477_r_mib_cnt,
.r_mib_pkt = ksz9477_r_mib_pkt,
@@ -1613,7 +1599,29 @@
int ksz9477_switch_register(struct ksz_device *dev)
{
- return ksz_switch_register(dev, &ksz9477_dev_ops);
+ int ret, i;
+ struct phy_device *phydev;
+
+ ret = ksz_switch_register(dev, &ksz9477_dev_ops);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < dev->phy_port_cnt; ++i) {
+ if (!dsa_is_user_port(dev->ds, i))
+ continue;
+
+ phydev = dsa_to_port(dev->ds, i)->slave->phydev;
+
+ /* The MAC actually cannot run in 1000 half-duplex mode. */
+ phy_remove_link_mode(phydev,
+ ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+
+ /* PHY does not support gigabit. */
+ if (!(dev->features & GBIT_SUPPORT))
+ phy_remove_link_mode(phydev,
+ ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
+ }
+ return ret;
}
EXPORT_SYMBOL(ksz9477_switch_register);