Update Linux to v5.4.148
Sourced from [1]
[1] https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.148.tar.gz
Change-Id: Ib3d26c5ba9b022e2e03533005c4fed4d7c30b61b
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 9219389..fb6cb24 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -90,6 +90,8 @@
$(addprefix $(obj)/,$(libfdt_hdrs))
ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
OBJS += $(libfdt_objs) atags_to_fdt.o
endif
@@ -101,7 +103,6 @@
$(libfdt) $(libfdt_hdrs) hyp-stub.S
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
-KBUILD_CFLAGS += $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -117,13 +118,14 @@
CFLAGS_fdt_rw.o := $(nossp_flags)
CFLAGS_fdt_wip.o := $(nossp_flags)
-ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+ -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
- sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
- -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
+ sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+ -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -165,7 +167,7 @@
# The .data section is already discarded by the linker script so no need
# to bother about it here.
check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
[ -z "$$bad_syms" ] || \
( echo "following symbols must have non local/private scope:" >&2; \
echo "$$bad_syms" >&2; false )
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 93dffed..cbe1262 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1142,9 +1142,9 @@
__armv7_mmu_cache_off:
mrc p15, 0, r0, c1, c0
#ifdef CONFIG_MMU
- bic r0, r0, #0x000d
+ bic r0, r0, #0x0005
#else
- bic r0, r0, #0x000c
+ bic r0, r0, #0x0004
#endif
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
mov r12, lr
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index b36c028..6a0f1f5 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -2,11 +2,13 @@
#ifndef _ARM_LIBFDT_ENV_H
#define _ARM_LIBFDT_ENV_H
+#include <linux/limits.h>
#include <linux/types.h>
#include <linux/string.h>
#include <asm/byteorder.h>
-#define INT_MAX ((int)(~0U>>1))
+#define INT32_MAX S32_MAX
+#define UINT32_MAX U32_MAX
typedef __be16 fdt16_t;
typedef __be32 fdt32_t;
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index fc7ed03..51b0786 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -43,7 +43,7 @@
}
.table : ALIGN(4) {
_table_start = .;
- LONG(ZIMAGE_MAGIC(2))
+ LONG(ZIMAGE_MAGIC(4))
LONG(ZIMAGE_MAGIC(0x5a534c4b))
LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
LONG(ZIMAGE_MAGIC(_kernel_bss_size))
diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
index 4093724..304495c 100755
--- a/arch/arm/boot/deflate_xip_data.sh
+++ b/arch/arm/boot/deflate_xip_data.sh
@@ -56,7 +56,7 @@
# substitute the data section by a compressed version
$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
$DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes |
-gzip -9 >> "$XIPIMAGE.tmp"
+$KGZIP -9 >> "$XIPIMAGE.tmp"
# replace kernel binary
mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 7ad0798..91f93bc 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -131,6 +131,11 @@
};
/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
clk_mcasp0_fixed: clk_mcasp0_fixed {
#clock-cells = <0>;
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 1fe3b56..09b36df 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -516,7 +516,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
- ti,pindir-d0-out-d1-in = <1>;
+ ti,pindir-d0-out-d1-in;
/* WLS1271 WiFi */
wlcore: wlcore@1 {
compatible = "ti,wl1271";
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index ff4f919..abf2bad 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -88,7 +88,6 @@
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
- AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
>;
};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 8678e6e..e5fdb7a 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
};
&i2c0 {
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index fb6b8aa..77fa7c0 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@
ethernet1 = &cpsw_emac1;
spi0 = &spi0;
spi1 = &spi1;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
};
cpus {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index cae4500..126965a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
};
lcd0: display {
- compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
@@ -829,11 +829,14 @@
status = "okay";
};
+&gpio5_target {
+ ti,no-reset-on-init;
+};
+
&gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&display_mux_pins>;
status = "okay";
- ti,no-reset-on-init;
p8 {
/*
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index f3ced6d..9f66f96 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -526,11 +526,11 @@
* Supply voltage supervisor on board will not allow opp50 so
* disable it and set opp100 as suspend OPP.
*/
- opp50@300000000 {
+ opp50-300000000 {
status = "disabled";
};
- opp100@600000000 {
+ opp100-600000000 {
opp-suspend;
};
};
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 59770dd..64fdd50 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1576,8 +1576,9 @@
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
- clock-names = "fck";
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+ <&dcan0_fck>;
+ clock-names = "fck", "osc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xcc000 0x2000>;
@@ -1585,6 +1586,8 @@
dcan0: can@0 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0 0x2000>;
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1597,8 +1600,9 @@
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
- clock-names = "fck";
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+ <&dcan1_fck>;
+ clock-names = "fck", "osc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd0000 0x2000>;
@@ -1606,6 +1610,8 @@
dcan1: can@0 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -2071,7 +2077,7 @@
};
};
- target-module@22000 { /* 0x48322000, ap 116 64.0 */
+ gpio5_target: target-module@22000 { /* 0x48322000, ap 116 64.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio6";
reg = <0x22000 0x4>,
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9531412..d0ea958 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
};
lcd0: display {
- compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
@@ -589,7 +589,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
tps65218: tps65218@24 {
reg = <0x24>;
@@ -848,6 +848,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi0_pins_default>;
pinctrl-1 = <&spi0_pins_sleep>;
+ ti,pindir-d0-out-d1-in;
};
&spi1 {
@@ -855,6 +856,7 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi1_pins_default>;
pinctrl-1 = <&spi1_pins_sleep>;
+ ti,pindir-d0-out-d1-in;
};
&usb2_phy1 {
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 091356f..c726cd8 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -704,6 +704,60 @@
ti,bit-shift = <8>;
reg = <0x2a48>;
};
+
+ clkout1_osc_div_ck: clkout1-osc-div-ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&sys_clkin_ck>;
+ ti,bit-shift = <20>;
+ ti,max-div = <4>;
+ reg = <0x4100>;
+ };
+
+ clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+ <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+ <&dpll_mpu_m2_ck>;
+ reg = <0x4100>;
+ };
+
+ clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&clkout1_src2_mux_ck>;
+ ti,bit-shift = <4>;
+ ti,max-div = <8>;
+ reg = <0x4100>;
+ };
+
+ clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&clkout1_src2_pre_div_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <32>;
+ ti,index-power-of-two;
+ reg = <0x4100>;
+ };
+
+ clkout1_mux_ck: clkout1-mux-ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+ <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+ ti,bit-shift = <16>;
+ reg = <0x4100>;
+ };
+
+ clkout1_ck: clkout1-ck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&clkout1_mux_ck>;
+ ti,bit-shift = <23>;
+ reg = <0x4100>;
+ };
};
&prcm {
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 0aaacea..10105a4 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -167,11 +167,7 @@
&pcie1_rc {
status = "okay";
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};
&mmc1 {
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index a064f13..ddf1236 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index bc76f17..a813a0c 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -29,6 +29,27 @@
reg = <0x0 0x80000000 0x0 0x80000000>;
};
+ main_12v0: fixedregulator-main_12v0 {
+ /* main supply */
+ compatible = "regulator-fixed";
+ regulator-name = "main_12v0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ evm_5v0: fixedregulator-evm_5v0 {
+ /* Output of TPS54531D */
+ compatible = "regulator-fixed";
+ regulator-name = "evm_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v0>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
@@ -547,10 +568,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
-&pcie1_ep {
- gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 34ca761..e86d479 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -611,12 +611,11 @@
>;
};
-&gpio3 {
- status = "okay";
+&gpio3_target {
ti,no-reset-on-init;
};
-&gpio2 {
+&gpio2_target {
status = "okay";
ti,no-reset-on-init;
};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 768b6c5..fde4c30 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -236,6 +236,7 @@
status = "okay";
compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ marvell,reg-init = <3 18 0 0x4985>;
/* irq is connected to &pcawan pin 7 */
};
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index 705adfa..a947580 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@
system-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_system_led_pins>;
+
status-led {
label = "helios4:green:status";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@
io-leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_io_led_pins>;
+
sata1-led {
label = "helios4:green:ata1";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -121,11 +127,15 @@
fan1: j10-pwm {
compatible = "pwm-fan";
pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_fan1_pins>;
};
fan2: j17-pwm {
compatible = "pwm-fan";
pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
+ pinctrl-names = "default";
+ pinctrl-0 = <&helios_fan2_pins>;
};
usb2_phy: usb2-phy {
@@ -291,16 +301,22 @@
"mpp39", "mpp40";
marvell,function = "sd0";
};
- helios_led_pins: helios-led-pins {
- marvell,pins = "mpp24", "mpp25",
- "mpp49", "mpp50",
+ helios_system_led_pins: helios-system-led-pins {
+ marvell,pins = "mpp24", "mpp25";
+ marvell,function = "gpio";
+ };
+ helios_io_led_pins: helios-io-led-pins {
+ marvell,pins = "mpp49", "mpp50",
"mpp52", "mpp53",
"mpp54";
marvell,function = "gpio";
};
- helios_fan_pins: helios-fan-pins {
- marvell,pins = "mpp41", "mpp43",
- "mpp48", "mpp55";
+ helios_fan1_pins: helios_fan1_pins {
+ marvell,pins = "mpp41", "mpp43";
+ marvell,function = "gpio";
+ };
+ helios_fan2_pins: helios_fan2_pins {
+ marvell,pins = "mpp48", "mpp55";
marvell,function = "gpio";
};
microsom_spi1_cs_pins: spi1-cs-pins {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 3f4bb44..669da3a 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -339,7 +339,8 @@
comphy: phy@18300 {
compatible = "marvell,armada-380-comphy";
- reg = <0x18300 0x100>;
+ reg-names = "comphy", "conf";
+ reg = <0x18300 0x100>, <0x18460 4>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 267d0c1..30abb4b 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -266,11 +266,6 @@
reg = <0x11000 0x100>;
};
-&i2c1 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
-};
-
&mpic {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 682f729..c58230f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -81,11 +81,6 @@
status = "okay";
};
-&vuart {
- // VUART Host Console
- status = "okay";
-};
-
&uart1 {
// Host Console
status = "okay";
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 22dade6..d1dbe3b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -22,9 +22,9 @@
#size-cells = <1>;
ranges;
- vga_memory: framebuffer@7f000000 {
+ vga_memory: framebuffer@9f000000 {
no-map;
- reg = <0x7f000000 0x01000000>;
+ reg = <0x9f000000 0x01000000>; /* 16M */
};
};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index dffb595..679d04d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -371,6 +371,7 @@
compatible = "aspeed,ast2400-ibt-bmc";
reg = <0xc0 0x18>;
interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index e8feb8b..412c96b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -464,6 +464,7 @@
compatible = "aspeed,ast2500-ibt-bmc";
reg = <0xc0 0x18>;
interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 5b8bf58..996e006 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -208,12 +208,12 @@
};
pinctrl_hvi3c3_default: hvi3c3_default {
- function = "HVI3C3";
+ function = "I3C3";
groups = "HVI3C3";
};
pinctrl_hvi3c4_default: hvi3c4_default {
- function = "HVI3C4";
+ function = "I3C4";
groups = "HVI3C4";
};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 7788d5d..ae6d07d 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -44,8 +44,8 @@
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
- ethernet-phy@0 {
- reg = <0x0>;
+ ethernet-phy@7 {
+ reg = <0x7>;
interrupt-parent = <&pioA>;
interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index ba7f3e6..b8db77b 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -40,7 +40,7 @@
ahb {
usb0: gadget@300000 {
- atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -125,8 +125,6 @@
bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
- non-removable;
- mmc-ddr-1_8v;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 61f068a..400eaf6 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -242,6 +242,11 @@
atmel,pins =
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
};
+ pinctrl_usb_default: usb_default {
+ atmel,pins =
+ <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
@@ -259,6 +264,8 @@
&pioE 3 GPIO_ACTIVE_LOW
&pioE 4 GPIO_ACTIVE_LOW
>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index fdfc37d..1d10106 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -133,6 +133,11 @@
atmel,pins =
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
};
+ pinctrl_usb_default: usb_default {
+ atmel,pins =
+ <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
pinctrl_key_gpio: key_gpio_0 {
atmel,pins =
<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -158,6 +163,8 @@
&pioE 11 GPIO_ACTIVE_HIGH
&pioE 14 GPIO_ACTIVE_HIGH
>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index dee9c0c..16c6fd3 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -187,7 +187,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -221,7 +221,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -239,7 +239,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -257,7 +257,7 @@
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -275,7 +275,7 @@
uart0 {
pinctrl_uart0: uart0-0 {
atmel,pins =
- <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+ <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
};
};
@@ -283,7 +283,7 @@
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
- <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index dba025a..5ed3d74 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -329,7 +329,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -347,7 +347,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -365,7 +365,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 99678ab..5c990cf 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -183,7 +183,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -201,7 +201,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -219,7 +219,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 691c95e..fd17909 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -556,7 +556,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -574,7 +574,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -592,7 +592,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -610,7 +610,7 @@
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 8643b71..0121bb0 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -278,23 +278,26 @@
atmel,adc-use-res = "highres";
trigger0 {
- trigger-name = "timer-counter-0";
+ trigger-name = "external-rising";
trigger-value = <0x1>;
+ trigger-external;
};
+
trigger1 {
- trigger-name = "timer-counter-1";
- trigger-value = <0x3>;
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
};
trigger2 {
- trigger-name = "timer-counter-2";
- trigger-value = <0x5>;
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
};
trigger3 {
- trigger-name = "external";
- trigger-value = <0x13>;
- trigger-external;
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
};
};
@@ -682,7 +685,7 @@
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
- <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -721,7 +724,7 @@
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -744,7 +747,7 @@
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
- <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
@@ -767,7 +770,7 @@
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3ef..9ca7b42 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
mdio: mdio@18002000 {
compatible = "brcm,iproc-mdio";
reg = <0x18002000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
+ #size-cells = <0>;
+ #address-cells = <1>;
status = "disabled";
gphy0: ethernet-phy@0 {
@@ -460,7 +460,7 @@
status = "disabled";
};
- nand: nand@18046000 {
+ nand_controller: nand-controller@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
<0x18046f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index e4d4973..3057410 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -75,7 +75,7 @@
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
@@ -83,7 +83,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
@@ -91,7 +91,7 @@
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x20620 0x20>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
@@ -179,7 +179,7 @@
status = "disabled";
};
- nand: nand@26000 {
+ nand_controller: nand-controller@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x26000 0x600>,
<0x11b408 0x600>,
@@ -217,7 +217,7 @@
};
qspi: spi@27200 {
- compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index da6d70f..43ff85d 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -257,17 +257,17 @@
status = "disabled";
};
- mailbox: mailbox@25000 {
+ mailbox: mailbox@25c00 {
compatible = "brcm,iproc-fa2-mbox";
- reg = <0x25000 0x445>;
- interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x25c00 0x400>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
dma-coherent;
};
- nand: nand@26000 {
+ nand_controller: nand-controller@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
<0x11b408 0x600>,
@@ -282,7 +282,7 @@
};
qspi: spi@27200 {
- compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index b75af21..f65448c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -24,7 +24,7 @@
leds {
act {
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
};
};
@@ -112,6 +112,7 @@
&sdhci {
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 2d191fc..50c6414 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -40,7 +40,7 @@
trips {
cpu-crit {
- temperature = <80000>;
+ temperature = <90000>;
hysteresis = <0>;
type = "critical";
};
@@ -488,6 +488,7 @@
"dsi0_ddr2",
"dsi0_ddr";
+ status = "disabled";
};
thermal: thermal@7e212000 {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1e..9711170 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -353,8 +353,8 @@
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
+ #size-cells = <0>;
+ #address-cells = <1>;
};
mdio-bus-mux@18003000 {
@@ -488,33 +488,33 @@
};
spi@18029200 {
- compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18029200 0x184>,
<0x18029000 0x124>,
<0x1811b408 0x004>,
<0x180293a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "spi_lr_fullness_reached",
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mspi_done",
+ "mspi_halted",
+ "spi_lr_fullness_reached",
"spi_lr_session_aborted",
"spi_lr_impatient",
"spi_lr_session_done",
- "spi_lr_overhead",
- "mspi_done",
- "mspi_halted";
+ "spi_lr_overread";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
- spi_nor: spi-nor@0 {
+ spi_nor: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325c..cca49a2 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
status = "disabled";
};
- nand: nand@2000 {
+ nand_controller: nand-controller@2000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7c..f92d2cf 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
};
};
-&nand {
+&nand_controller {
status = "okay";
- nandcs@1 {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <1>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9..5ac2042 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
reg-names = "aon-ctrl", "aon-sram";
};
- nand: nand@3e2800 {
+ nand_controller: nand-controller@3e2800 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f..a76c74b 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
status = "okay";
};
-&nand {
- nandcs@1 {
+&nand_controller {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index b4a1392..dda3e11 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
status = "okay";
};
-&nand {
- nandcs@1 {
+&nand_controller {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 3378683..ea3c6b8 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
status = "okay";
};
-&nand {
- nandcs@1 {
+&nand_controller {
+ nand@1 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 8c388eb..e9b2d3b 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -70,8 +70,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index c339771..dfe145a 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -70,8 +70,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 1c72ec8..17e6a68 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -86,8 +86,8 @@
};
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 96a021c..1d1bc8d 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -74,8 +74,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b2c7f21..d5d9a27 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -74,8 +74,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index a2c9de3..670363b 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -90,8 +90,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 3fcca12..f15cd38 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -64,8 +64,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 5b17727..df5c8ab 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- nandcs@0 {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-strength = <4>;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index edd0f63..16b212c 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
status = "okay";
};
-&nand {
- nandcs@0 {
+&nand_controller {
+ nand@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 3931fb0..91d1018 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -24,12 +24,12 @@
&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
};
&cpsw_emac1 {
phy-handle = <ðphy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
};
&davinci_mdio {
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 9e43d5e..79ccdd4 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -33,12 +33,12 @@
&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
};
&cpsw_emac1 {
phy-handle = <ðphy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
};
&davinci_mdio {
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 861ab90..c16e183 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -24,12 +24,12 @@
&cpsw_emac0 {
phy-handle = <ðphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
};
&cpsw_emac1 {
phy-handle = <ðphy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
};
&davinci_mdio {
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 5cac2dd..3f845a8 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1176,7 +1176,7 @@
};
};
- target-module@34000 { /* 0x48034000, ap 7 46.0 */
+ timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer3";
reg = <0x34000 0x4>,
@@ -1204,7 +1204,7 @@
};
};
- target-module@36000 { /* 0x48036000, ap 9 4e.0 */
+ timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
ti,hwmods = "timer4";
reg = <0x36000 0x4>,
@@ -1326,7 +1326,7 @@
};
};
- target-module@55000 { /* 0x48055000, ap 13 0e.0 */
+ gpio2_target: target-module@55000 { /* 0x48055000, ap 13 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x55000 0x4>,
<0x55010 0x4>,
@@ -1359,7 +1359,7 @@
};
};
- target-module@57000 { /* 0x48057000, ap 15 06.0 */
+ gpio3_target: target-module@57000 { /* 0x48057000, ap 15 06.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x57000 0x4>,
<0x57010 0x4>,
@@ -3059,7 +3059,7 @@
davinci_mdio: mdio@1000 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+ clocks = <&gmac_main_clk>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
@@ -3413,6 +3413,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3441,6 +3442,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3469,6 +3471,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
@@ -3497,6 +3500,7 @@
clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
clock-names = "fck";
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+ ti,timer-pwm;
};
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 953f0ff..f73324c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
timer {
compatible = "arm,armv7-timer";
+ status = "disabled"; /* See ARM architected timer wrap erratum i940 */
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -148,6 +149,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
@@ -171,6 +173,7 @@
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
+ dma-ranges;
/**
* To enable PCI endpoint mode, disable the pcie1_rc
* node and enable pcie1_ep mode.
@@ -228,6 +231,7 @@
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
+ dma-ranges;
status = "disabled";
pcie2_rc: pcie@51800000 {
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
@@ -763,3 +767,22 @@
#include "dra7-l4.dtsi"
#include "dra7xx-clocks.dtsi"
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer3_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
+
+&timer4_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index cdcba3f..859e438 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -32,8 +32,8 @@
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
- clocks = <&mcan_clk>, <&l3_iclk_div>;
- clock-names = "cclk", "hclk";
+ clocks = <&l3_iclk_div>, <&mcan_clk>;
+ clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
};
};
@@ -86,3 +86,8 @@
&usb4_tm {
status = "disabled";
};
+
+&mmc3 {
+ /* dra76x is not affected by i887 */
+ max-frequency = <96000000>;
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 93e1eb8..d7d98d2 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -796,16 +796,6 @@
clock-div = <1>;
};
- ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
- ti,bit-shift = <24>;
- reg = <0x0520>;
- assigned-clocks = <&ipu1_gfclk_mux>;
- assigned-clock-parents = <&dpll_core_h22x2_ck>;
- };
-
dummy_ck: dummy_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -1564,6 +1554,8 @@
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
+ assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+ assigned-clock-parents = <&dpll_core_h22x2_ck>;
};
ipu_clkctrl: ipu-clkctrl@50 {
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index dee35e3..69d134d 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -75,7 +75,7 @@
s2mps14_pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
- interrupts = <5 IRQ_TYPE_NONE>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps14_irq>;
reg = <0x66>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 248bd37..a23a874 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -195,7 +195,7 @@
s2mps14_pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 86c26a4..468932f 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -260,7 +260,7 @@
s2mps14_pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
reg = <0x66>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 09d3d54..1b55783 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -115,7 +115,7 @@
gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
- cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
lcd@0 {
compatible = "samsung,ld9040";
@@ -124,8 +124,6 @@
vci-supply = <&ldo17_reg>;
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <1200000>;
- spi-cpol;
- spi-cpha;
power-on-delay = <10>;
reset-delay = <10>;
panel-width-mm = <90>;
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index ce87d2f..4b9c4ca 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -68,7 +68,7 @@
i2c_cm36651: i2c-gpio-2 {
compatible = "i2c-gpio";
- gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpf0 0 GPIO_ACTIVE_HIGH>, <&gpf0 1 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 83be3a7..fedb213 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -139,7 +139,7 @@
max77693@66 {
compatible = "maxim,max77693";
interrupt-parent = <&gpx1>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77693_irq>;
reg = <0x66>;
@@ -187,7 +187,7 @@
max77693-fuel-gauge@36 {
compatible = "maxim,max17047";
interrupt-parent = <&gpx2>;
- interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77693_fuel_irq>;
reg = <0x36>;
@@ -588,7 +588,7 @@
max77686: max77686_pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
- interrupts = <7 IRQ_TYPE_NONE>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max77686_irq>;
pinctrl-names = "default";
reg = <0x09>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ea55f37..424d12e 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -274,7 +274,7 @@
max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
reg = <0x09>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 6dc9694..70a2b6e 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -133,7 +133,7 @@
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a61..737f0e2 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
max77686: max77686@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 3d50192..2355c53 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -108,7 +108,7 @@
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
wakeup-source;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index e0db251..f68baaf 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -327,6 +327,8 @@
regulator-name = "vddq_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ /* Supplies also GPK and GPJ */
+ regulator-always-on;
};
ldo8_reg: LDO8 {
@@ -637,11 +639,11 @@
};
&usbdrd_dwc3_0 {
- dr_mode = "host";
+ dr_mode = "peripheral";
};
&usbdrd_dwc3_1 {
- dr_mode = "peripheral";
+ dr_mode = "host";
};
&usbdrd3_0 {
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 369a8a7..481ee99 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -560,6 +560,34 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ usb3_1_oc: usb3-1-oc {
+ samsung,pins = "gpk2-4", "gpk2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ usb3_1_vbusctrl: usb3-1-vbusctrl {
+ samsung,pins = "gpk2-6", "gpk2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ usb3_0_oc: usb3-0-oc {
+ samsung,pins = "gpk3-0", "gpk3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ usb3_0_vbusctrl: usb3-0-vbusctrl {
+ samsung,pins = "gpk3-2", "gpk3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
};
&pinctrl_2 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index e6f78b1..d077373 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -398,6 +398,8 @@
&usbdrd3_0 {
clocks = <&clock CLK_USBD300>;
clock-names = "usbdrd30";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
};
&usbdrd_phy0 {
@@ -409,6 +411,8 @@
&usbdrd3_1 {
clocks = <&clock CLK_USBD301>;
clock-names = "usbdrd30";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
};
&usbdrd_dwc3_1 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 592d7b4..53bf988 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -349,7 +349,7 @@
reg = <0x66>;
interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 829147e..9e64a4a 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -141,7 +141,7 @@
samsung,s2mps11-acokb-ground;
interrupt-parent = <&gpx0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index d271e75..fce5a45 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -22,7 +22,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 892d389..1fc3544 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -24,7 +24,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 56acd83..16e1087 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -22,7 +22,7 @@
* Green LED is much brighter than the others
* so limit its max brightness
*/
- max_brightness = <127>;
+ max-brightness = <127>;
linux,default-trigger = "mmc0";
};
@@ -30,7 +30,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 360642a..d0bbf2b 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
/* Uses MDC and MDIO */
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 521714f..e1020e0 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf..0ebda4e 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
};
};
- ethernet@60000000 {
- status = "okay";
-
- ethernet-port@0 {
- phy-mode = "rgmii";
- phy-handle = <&phy0>;
- };
- ethernet-port@1 {
- /* Not used in this platform */
- };
- };
-
usb@68000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761d..5602ba8 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc..a4a260c 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
};
};
- mdio0: ethernet-phy {
+ mdio0: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 8cf67b1..ef4f1c5 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@
clock-names = "PCLK", "PCICLK";
pinctrl-names = "default";
pinctrl-0 = <&pci_default_pins>;
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 0cd75da..1886397 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -75,8 +75,8 @@
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
- MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index a25da41..907339b 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -59,7 +59,7 @@
MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
- MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4
+ MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84
>;
};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 719ed5c..64faf5b 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -388,13 +388,13 @@
pinctrl_power_button: powerbutgrp {
fsl,pins = <
- MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4
+ MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4
>;
};
pinctrl_power_out: poweroutgrp {
fsl,pins = <
- MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4
+ MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4
>;
};
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index 5ff9a17..c80d170 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@
clock-frequency = <11289600>;
};
+ achc_24M: achc-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
sgtlsound: sound {
compatible = "fsl,imx53-cpuvo-sgtl5000",
"fsl,imx-audio-sgtl5000";
@@ -287,16 +293,13 @@
&gpio4 12 GPIO_ACTIVE_LOW>;
status = "okay";
- spidev0: spi@0 {
- compatible = "ge,achc";
- reg = <0>;
- spi-max-frequency = <1000000>;
- };
-
- spidev1: spi@1 {
- compatible = "ge,achc";
- reg = <1>;
- spi-max-frequency = <1000000>;
+ spidev0: spi@1 {
+ compatible = "ge,achc", "nxp,kinetis-k20";
+ reg = <1>, <0>;
+ vdd-supply = <®_3v3>;
+ vdda-supply = <®_3v3>;
+ clocks = <&achc_24M>;
+ reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
};
gpioxra0: gpio@2 {
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
index e43bccb..d8f3821 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -8,7 +8,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index e8d800f..ce4a5a8 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -99,9 +99,13 @@
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
- phy-handle = <ðphy0>;
status = "okay";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
mdio {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
index 0d594e4..a1173bf 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -38,7 +38,7 @@
};
&switch_ports {
- /delete-node/ port@2;
+ /delete-node/ port@3;
};
&touchscreen {
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 95b8f2d..fb09801 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -65,13 +65,6 @@
};
};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
&ldb {
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 611cb7a..8f762d9 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -65,13 +65,6 @@
};
};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
- <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
&ldb {
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index e4cb118..1ea64ec 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -53,17 +53,6 @@
};
};
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
- <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
- <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
- <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
- <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
- <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
-};
-
&ldb {
fsl,dual-channel;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index fa27dcd..1938b04 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -377,3 +377,18 @@
#interrupt-cells = <1>;
};
};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+ <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index 9c61e3b..1c46df6 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -55,7 +55,7 @@
#sound-dai-cells = <0>;
clocks = <&clk_ext_audio_codec>;
VDDA-supply = <®_3p3v>;
- VDDIO-supply = <®_3p3v>;
+ VDDIO-supply = <&sw2_reg>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 387801d..3233927 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -98,30 +98,40 @@
reg = <0>;
max-speed = <100>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1000>;
- reset-post-delay-us = <1000>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <1000>;
+ smsc,disable-energy-detect; /* Make plugin detection reliable */
};
};
};
&i2c1 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
ltc3676: pmic@3c {
@@ -206,7 +216,7 @@
};
rtc@56 {
- compatible = "rv3029c2";
+ compatible = "microcrystal,rv3029";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc_hw300>;
reg = <0x56>;
@@ -287,6 +297,13 @@
>;
};
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2-grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
@@ -294,6 +311,13 @@
>;
};
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c3: i2c3-grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
@@ -301,6 +325,13 @@
>;
};
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+ >;
+ };
+
pinctrl_pmic_hw300: pmic-hw300-grp {
fsl,pins = <
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0
@@ -408,6 +439,18 @@
vin-supply = <&sw1_reg>;
};
+®_pu {
+ vin-supply = <&sw1_reg>;
+};
+
+®_vdd1p1 {
+ vin-supply = <&sw2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&sw2_reg>;
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e..c4e146f 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
- #gpio-cells = <1>;
+ #gpio-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1a9a9d9..14d6fec 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -273,7 +273,7 @@
/* VDD_AUD_1P8: Audio codec */
reg_aud_1p8v: ldo3 {
- regulator-name = "vdd1p8";
+ regulator-name = "vdd1p8a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index c23ba22..8c33510 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -105,19 +105,16 @@
sound-digital {
compatible = "simple-audio-card";
simple-audio-card,name = "tda1997x-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_codec>;
+ simple-audio-card,frame-master = <&sound_codec>;
- simple-audio-card,dai-link@0 {
- format = "i2s";
+ sound_cpu: simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ };
- cpu {
- sound-dai = <&ssi2>;
- };
-
- codec {
- bitclock-master;
- frame-master;
- sound-dai = <&hdmi_receiver>;
- };
+ sound_codec: simple-audio-card,codec {
+ sound-dai = <&hdmi_receiver>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 7814f1e..fde56f9 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -384,7 +384,7 @@
pinctrl_usbotg: usbotggrp {
fsl,pins = <
- MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
@@ -396,6 +396,7 @@
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 81c7ebb..eea317b 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -167,7 +167,7 @@
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
- status = "disabld";
+ status = "disabled";
};
i2c_cam: i2c-gpio-cam {
@@ -179,7 +179,7 @@
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
- status = "disabld";
+ status = "disabled";
};
};
@@ -551,7 +551,7 @@
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index bc43c75..3617089 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -315,8 +315,8 @@
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
>;
};
@@ -403,6 +403,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
status = "disabled";
};
@@ -432,6 +433,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&vdd_sd1_reg>;
status = "disabled";
};
@@ -441,5 +443,6 @@
&pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&vdd_sd0_reg>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 6486df3..31fa37d 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -107,14 +107,14 @@
regulators {
vdd_arm: buck1 {
regulator-name = "vdd_arm";
- regulator-min-microvolt = <730000>;
+ regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
vdd_soc: buck2 {
regulator-name = "vdd_soc";
- regulator-min-microvolt = <730000>;
+ regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
@@ -183,7 +183,6 @@
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
non-removable;
- vmmc-supply = <&vdd_emmc_1p8>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 71ca76a..fe59dde 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -749,10 +749,6 @@
vin-supply = <&vgen5_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&vgen5_reg>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
index 44a97ba..352ac58 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -153,6 +153,7 @@
bus-width = <4>;
keep-power-in-suspend;
mmc-pwrseq = <&pwrseq_ti_wifi>;
+ cap-power-off-card;
non-removable;
vmmc-supply = <&vcc_3v3>;
/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 6d7f6b9..f264924 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -54,7 +54,13 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
phy-mode = "rgmii-id";
- phy-reset-duration = <2>;
+
+ /*
+ * The PHY seems to require a long-enough reset duration to avoid
+ * some rare issues where the PHY gets stuck in an inconsistent and
+ * non-functional state at boot-up. 10ms proved to be fine .
+ */
+ phy-reset-duration = <10>;
phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 776bfc7..16672cb 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -98,7 +98,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 9390979..b9b698f 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -166,7 +166,6 @@
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 93be00a..a66c4fa 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -627,7 +627,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <®_3p3v_sd>;
vqmmc-supply = <®_3p3v>;
no-1-8-v;
@@ -640,7 +640,7 @@
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <®_3p3v_sd>;
vqmmc-supply = <®_3p3v>;
no-1-8-v;
@@ -774,6 +774,7 @@
&usbh1 {
vbus-supply = <®_5p0v_main>;
disable-over-current;
+ maximum-speed = "full-speed";
status = "okay";
};
@@ -1055,7 +1056,6 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
>;
};
@@ -1068,7 +1068,6 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040
>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e6b4b85..bc488df 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1039,9 +1039,8 @@
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupt-names = "int0", "pps";
- interrupts-extended =
- <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+ <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET_REF>;
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index 5f51f8e..d91f92f 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -77,7 +77,6 @@
};
&fec {
- /delete-property/interrupts-extended;
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
<0 119 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 4829aa6..bc86cfa 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -584,10 +584,6 @@
vin-supply = <&sw2_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&sw2_reg>;
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 3a96b55..540880f 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -936,8 +936,10 @@
};
rngb: rngb@21b4000 {
+ compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb";
reg = <0x021b4000 0x4000>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SL_CLK_DUMMY>;
};
weim: weim@21b8000 {
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 3e1d32f..5ace9e6 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -265,10 +265,6 @@
status = "okay";
};
-®_3p0 {
- vin-supply = <&sw2_reg>;
-};
-
&snvs_poweroff {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 315044c..e471956 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -99,7 +99,7 @@
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy0>;
fsl,magic-packet;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index f1830ed..91a7548 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -159,10 +159,6 @@
vin-supply = <&vgen6_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index a8ee708..5a63ca6 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -141,10 +141,6 @@
vin-supply = <&vgen6_reg>;
};
-®_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
®_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index f6972de..865528b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -213,7 +213,7 @@
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-handle = <ðphy2>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c2a9dd5..aa86341 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -215,7 +215,7 @@
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
index 0205fd5..4e99e6c 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -157,10 +157,6 @@
status = "okay";
};
-&snvs_poweroff {
- status = "okay";
-};
-
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 038d8c9..6213968 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -43,6 +43,7 @@
assigned-clock-rates = <0>, <198000000>;
cap-power-off-card;
keep-power-in-suspend;
+ max-frequency = <25000000>;
mmc-pwrseq = <&wifi_pwrseq>;
no-1-8-v;
non-removable;
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 917eb0b..8bba03d 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -337,7 +337,6 @@
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
- max-frequency = <100000000>;
vmmc-supply = <®_module_3v3>;
vqmmc-supply = <®_DCDC3>;
non-removable;
@@ -347,7 +346,7 @@
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
- &pinctrl_gpio7>;
+ &pinctrl_gpio7 &pinctrl_usbc_det>;
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
@@ -452,7 +451,6 @@
pinctrl_enet1: enet1grp {
fsl,pins = <
- MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73
@@ -650,6 +648,12 @@
>;
};
+ pinctrl_usbc_det: gpio-usbc-det {
+ fsl,pins = <
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14
+ >;
+ };
+
pinctrl_usbh_reg: gpio-usbh-vbus {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210..dd8003b 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
keep-power-in-suspend;
- tuning-step = <2>;
+ fsl,tuning-step = <2>;
vmmc-supply = <®_3p3v>;
no-1-8-v;
broken-cd;
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 6f50ebf..8a8df54 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -307,7 +307,7 @@
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
bus-width = <4>;
- tuning-step = <2>;
+ fsl,tuning-step = <2>;
vmmc-supply = <®_3p3v>;
wakeup-source;
no-1-8-v;
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index 1fb1ec5..6d16e32 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -49,3 +49,7 @@
reg = <0x80000000 0x10000000>;
};
};
+
+&gpmi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 6859a3a..0108b63 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -37,10 +37,10 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu0: cpu@0 {
+ cpu0: cpu@f00 {
compatible = "arm,cortex-a7";
device_type = "cpu";
- reg = <0>;
+ reg = <0xf00>;
};
};
@@ -397,7 +397,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLC>;
clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 0 32>;
+ gpio-ranges = <&iomuxc1 0 0 20>;
};
gpio_ptd: gpio@40af0000 {
@@ -411,7 +411,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLD>;
clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 32 32>;
+ gpio-ranges = <&iomuxc1 0 32 12>;
};
gpio_pte: gpio@40b00000 {
@@ -425,7 +425,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 64 32>;
+ gpio-ranges = <&iomuxc1 0 64 16>;
};
gpio_ptf: gpio@40b10000 {
@@ -439,7 +439,7 @@
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 96 32>;
+ gpio-ranges = <&iomuxc1 0 96 20>;
};
};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
index 100396f..395e05f 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
@@ -51,6 +51,8 @@
&mcbsp2 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
};
&charger {
@@ -102,35 +104,18 @@
regulator-max-microvolt = <3300000>;
};
- lcd0: display@0 {
- compatible = "panel-dpi";
- label = "28";
- status = "okay";
- /* default-on; */
+ lcd0: display {
+ /* This isn't the exact LCD, but the timings meet spec */
+ compatible = "logicpd,type28";
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_pin>;
- enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <2>;
- vsync-len = <11>;
- hsync-active = <1>;
- vsync-active = <1>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
};
bl: backlight {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
index 07ac99b..cdb89b3 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
@@ -11,22 +11,6 @@
#include "logicpd-torpedo-37xx-devkit.dts"
&lcd0 {
-
- label = "28";
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <2>;
- vsync-len = <11>;
- hsync-active = <1>;
- vsync-active = <1>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ /* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+ compatible = "logicpd,type28";
};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 449cc76..e7a8f8a 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -80,6 +80,8 @@
};
&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 7b7ec7b..824393e 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -329,9 +329,6 @@
clocks = <&xtal_32k>, <&xtal>;
clock-names = "xtal_32k", "xtal";
-
- assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
- assigned-clock-rates = <208000000>;
};
};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2f6977a..c62fcca 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -181,7 +181,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1550000 0x0 0x10000>,
- <0x0 0x40000000 0x0 0x40000000>;
+ <0x0 0x40000000 0x0 0x20000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
@@ -728,7 +728,7 @@
};
mdio0: mdio@2d24000 {
- compatible = "fsl,etsec2-mdio";
+ compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
@@ -737,7 +737,7 @@
};
mdio1: mdio@2d64000 {
- compatible = "fsl,etsec2-mdio";
+ compatible = "gianfar";
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
@@ -753,7 +753,7 @@
fsl,tmr-prsc = <2>;
fsl,tmr-add = <0xaaaaaaab>;
fsl,tmr-fiper1 = <999999995>;
- fsl,tmr-fiper2 = <99990>;
+ fsl,tmr-fiper2 = <999999995>;
fsl,max-adj = <499999999>;
fsl,extts-fifo;
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 5a7e3e5..d7c9dbe 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -129,8 +129,8 @@
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";
- opp-182150000 {
- opp-hz = /bits/ 64 <182150000>;
+ opp-182142857 {
+ opp-hz = /bits/ 64 <182142857>;
opp-microvolt = <1150000>;
};
opp-318750000 {
@@ -230,8 +230,6 @@
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
@@ -243,8 +241,13 @@
"pp2", "ppmmu2", "pp4", "ppmmu4",
"pp5", "ppmmu5", "pp6", "ppmmu6";
resets = <&reset RESET_MALI>;
+
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
+
+ assigned-clocks = <&clkc CLKID_MALI>;
+ assigned-clock-rates = <318750000>;
+
operating-points-v2 = <&gpu_opp_table>;
};
};
@@ -253,7 +256,7 @@
&aobus {
pmu: pmu@e0 {
compatible = "amlogic,meson8-pmu", "syscon";
- reg = <0xe0 0x8>;
+ reg = <0xe0 0x18>;
};
pinctrl_aobus: pinctrl@84 {
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index bed1dfe..32d1c32 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -148,7 +148,7 @@
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&vcc_5v>;
+ pwm-supply = <&vcc_5v>;
pwms = <&pwm_cd 0 1148 0>;
pwm-dutycycle-range = <100 0>;
@@ -232,7 +232,7 @@
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&vcc_5v>;
+ pwm-supply = <&vcc_5v>;
pwms = <&pwm_cd 1 1148 0>;
pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 6e39ad5..ab8fe55 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -39,6 +39,8 @@
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
+ pwm-supply = <&vcc_5v>;
+
pwms = <&pwm_cd 0 1148 0>;
pwm-dutycycle-range = <100 0>;
@@ -84,7 +86,7 @@
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&vcc_5v>;
+ pwm-supply = <&vcc_5v>;
pwms = <&pwm_cd 1 1148 0>;
pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a24eccc..c413af9 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -130,7 +130,7 @@
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&p5v0>;
+ pwm-supply = <&p5v0>;
pwms = <&pwm_cd 0 12218 0>;
pwm-dutycycle-range = <91 0>;
@@ -162,7 +162,7 @@
regulator-min-microvolt = <860000>;
regulator-max-microvolt = <1140000>;
- vin-supply = <&p5v0>;
+ pwm-supply = <&p5v0>;
pwms = <&pwm_cd 1 12218 0>;
pwm-dutycycle-range = <91 0>;
@@ -219,7 +219,7 @@
reg = <0>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio_intc>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 099bf8e..1e8c5d7 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -125,8 +125,8 @@
opp-hz = /bits/ 64 <255000000>;
opp-microvolt = <1100000>;
};
- opp-364300000 {
- opp-hz = /bits/ 64 <364300000>;
+ opp-364285714 {
+ opp-hz = /bits/ 64 <364285714>;
opp-microvolt = <1100000>;
};
opp-425000000 {
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index d54477b..84b6ed5 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -83,7 +83,7 @@
reg = <0>;
reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
+ reset-deassert-us = <80000>;
reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index d1eae47..ab91c4e 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -13,8 +13,10 @@
#interrupt-cells = <2>;
#address-cells = <1>;
#size-cells = <0>;
- spi-max-frequency = <3000000>;
+ spi-max-frequency = <9600000>;
spi-cs-high;
+ spi-cpol;
+ spi-cpha;
cpcap_adc: adc {
compatible = "motorola,mapphone-cpcap-adc";
@@ -160,12 +162,12 @@
regulator-enable-ramp-delay = <1000>;
};
- /* Used by DSS */
+ /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */
vcsi: VCSI {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-enable-ramp-delay = <1000>;
- regulator-boot-on;
+ regulator-always-on;
};
vdac: VDAC {
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 2b760f9..5375c66 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -192,6 +192,7 @@
fixed-link {
speed = <1000>;
full-duplex;
+ pause;
};
};
};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b760613..0447748 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -138,6 +138,7 @@
mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
+ phy-mode = "rgmii";
phy-handle = <&phy5>;
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 84a5ade..4227da7 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -105,6 +105,14 @@
linux,code = <SW_FRONT_PROXIMITY>;
linux,can-disable;
};
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
};
isp1707: isp1707 {
@@ -155,6 +163,12 @@
pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
};
+ rom_rng: rng {
+ compatible = "nokia,n900-rom-rng";
+ clocks = <&rng_ick>;
+ clock-names = "ick";
+ };
+
/* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
vctcxo: vctcxo {
compatible = "fixed-clock";
@@ -808,10 +822,6 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
- /* For debugging, it is often good idea to remove this GPIO.
- It means you can remove back cover (to reboot by removing
- battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};
/* most boards use vaux3, only some old versions use vmmc2 instead */
@@ -843,34 +853,46 @@
compatible = "ti,omap2-onenand";
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+ /*
+ * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+ * bootloader set values when booted with v5.1
+ * (OneNAND Manufacturer: Samsung):
+ *
+ * cs0 GPMC_CS_CONFIG1: 0xfb001202
+ * cs0 GPMC_CS_CONFIG2: 0x00111100
+ * cs0 GPMC_CS_CONFIG3: 0x00020200
+ * cs0 GPMC_CS_CONFIG4: 0x11001102
+ * cs0 GPMC_CS_CONFIG5: 0x03101616
+ * cs0 GPMC_CS_CONFIG6: 0x90060000
+ */
gpmc,sync-read;
gpmc,sync-write;
gpmc,burst-length = <16>;
gpmc,burst-read;
gpmc,burst-wrap;
gpmc,burst-write;
- gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
- gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <87>;
- gpmc,cs-wr-off-ns = <87>;
+ gpmc,cs-rd-off-ns = <102>;
+ gpmc,cs-wr-off-ns = <102>;
gpmc,adv-on-ns = <0>;
- gpmc,adv-rd-off-ns = <10>;
- gpmc,adv-wr-off-ns = <10>;
- gpmc,oe-on-ns = <15>;
- gpmc,oe-off-ns = <87>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <12>;
+ gpmc,oe-off-ns = <102>;
gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <87>;
- gpmc,rd-cycle-ns = <112>;
- gpmc,wr-cycle-ns = <112>;
- gpmc,access-ns = <81>;
- gpmc,page-burst-access-ns = <15>;
+ gpmc,we-off-ns = <102>;
+ gpmc,rd-cycle-ns = <132>;
+ gpmc,wr-cycle-ns = <132>;
+ gpmc,access-ns = <96>;
+ gpmc,page-burst-access-ns = <18>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
- gpmc,clk-activation-ns = <5>;
- gpmc,wr-data-mux-bus-ns = <30>;
- gpmc,wr-access-ns = <81>;
+ gpmc,clk-activation-ns = <6>;
+ gpmc,wr-data-mux-bus-ns = <36>;
+ gpmc,wr-access-ns = <96>;
gpmc,sync-clk-ps = <15000>;
/*
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index ec58917..150d5be 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -226,6 +226,17 @@
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};
+ /* wl1251 wifi+bt module */
+ wlan_en: fixed-regulator-wg7210_en {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <50000>;
+ enable-active-high;
+ gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+
/* wg7210 (wifi+bt module) 32k clock buffer */
wg7210_32k: fixed-regulator-wg7210_32k {
compatible = "regulator-fixed";
@@ -522,9 +533,30 @@
/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
};
-/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
&mmc3 {
- status = "disabled";
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
};
/* bluetooth*/
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index a7a04d7..f24e232 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -222,7 +222,7 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vqmmc-supply = <&vsim>;
- cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4043ecb..0c8fcfb 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -23,6 +23,9 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 8047e8c..4548d87 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -139,7 +139,7 @@
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio2>;
- interrupts = <12 IRQ_TYPE_EDGE_FALLING>; /* gpio_44 */
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>; /* gpio_44 */
phy-mode = "mii";
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 9dd307b..468ad1b 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -46,7 +46,7 @@
button_pins: pinmux_button_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 7cc95bc..0a36b8f 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
+ mmc3 = &mmc4;
+ mmc4 = &mmc5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -328,10 +333,10 @@
status = "disabled";
};
- target-module@56000000 {
+ sgx_module: target-module@56000000 {
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x5601fc00 0x4>,
- <0x5601fc10 0x4>;
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cbcdcb4..6e320ef 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -33,10 +33,12 @@
};
ocp {
+ /* 4430 has only gpio_86 tshut and no talert interrupt */
bandgap: bandgap@4a002260 {
reg = <0x4a002260 0x4
0x4a00232C 0x4>;
compatible = "ti,omap4430-bandgap";
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
#thermal-sensor-cells = <0>;
};
@@ -74,3 +76,13 @@
};
/include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+ assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+ <&dpll_per_m7x2_ck>;
+ assigned-clock-rates = <0>, <153600000>;
+ assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index e9d9c84..68ab6a9 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -770,14 +770,6 @@
ti,max-div = <2>;
};
- sha2md5_fck: sha2md5_fck@15c8 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&l3_div_ck>;
- ti,bit-shift = <1>;
- reg = <0x15c8>;
- };
-
usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 68ac046..c7bf68c 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -30,14 +30,6 @@
regulator-max-microvolt = <5000000>;
};
- vdds_1v8_main: fixedregulator-vdds_1v8_main {
- compatible = "regulator-fixed";
- regulator-name = "vdds_1v8_main";
- vin-supply = <&smps7_reg>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
vmmcsd_fixed: fixedregulator-mmcsd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
regulator-boot-on;
};
+ vdds_1v8_main:
smps7_reg: smps7 {
/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
regulator-name = "smps7";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 1fb7937..3b56e99 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
i2c2 = &i2c3;
i2c3 = &i2c4;
i2c4 = &i2c5;
+ mmc0 = &mmc1;
+ mmc1 = &mmc2;
+ mmc2 = &mmc3;
+ mmc3 = &mmc4;
+ mmc4 = &mmc5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -143,6 +148,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
reg = <0 0x44000000 0 0x2000>,
<0 0x44800000 0 0x3000>,
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index 5ceb6cc..1dbe4e8 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -84,21 +84,21 @@
global_timer: timer@b0020200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xb0020200 0x100>;
- interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
twd_timer: timer@b0020600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xb0020600 0x20>;
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
twd_wdt: wdt@b0020620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xb0020620 0xe0>;
- interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
index 9f6c2b6..0755e58 100644
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -323,8 +323,8 @@
interrupt-controller;
reg = <0 0x200>;
#interrupt-cells = <1>;
- valid-mask = <0xFFFFFFFF>;
- clear-mask = <0>;
+ valid-mask = <0xffffffff>;
+ clear-mask = <0xffffffff>;
};
timer0: timer@200 {
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
index c9b3277..90846a7 100644
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -240,8 +240,8 @@
reg = <0 0x200>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
- valid-mask = <0xFFFFFFFF>;
- clear-mask = <0>;
+ valid-mask = <0xffffffff>;
+ clear-mask = <0xffffffff>;
};
timer0: timer@200 {
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index 5ae8607..3fcc86d 100644
--- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -45,18 +45,21 @@
emac: gem@30000 {
compatible = "cadence,gem";
reg = <0x30000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <31>;
};
dmac1: dmac@40000 {
compatible = "snps,dw-dmac";
reg = <0x40000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <25>;
};
dmac2: dmac@50000 {
compatible = "snps,dw-dmac";
reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <26>;
};
@@ -234,6 +237,7 @@
axi2pico@c0000000 {
compatible = "picochip,axi2pico-pc3x2";
reg = <0xc0000000 0x10000>;
+ interrupt-parent = <&vic0>;
interrupts = <13 14 15 16 17 18 19 20 21>;
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8b79b41..2b075e2 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1261,9 +1261,9 @@
<&mmcc DSI1_BYTE_CLK>,
<&mmcc DSI_PIXEL_CLK>,
<&mmcc DSI1_ESC_CLK>;
- clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
- "src_clk", "byte_clk", "pixel_clk",
- "core_clk";
+ clock-names = "iface", "bus", "core_mmss",
+ "src", "byte", "pixel",
+ "core";
assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
<&mmcc DSI1_ESC_SRC>,
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index dd865f3..4447f45 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -131,7 +131,14 @@
cmt1: timer@e6130000 {
compatible = "renesas,r8a73a4-cmt1", "renesas,rcar-gen2-cmt1";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 12ffe73..155f58e 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -479,7 +479,7 @@
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
- clocks = <&extal1_clk>, <&extalr_clk>;
+ clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index de981d6..fdd2678 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -338,7 +338,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7743",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7743",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7743",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7743",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7743",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7743",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index fa74a26..8264481 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -338,7 +338,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7744",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7744",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7744",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7744",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7744",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7744",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index c53f7ff..c306713 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -302,7 +302,7 @@
resets = <&cpg 407>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -312,7 +312,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -321,7 +321,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -331,7 +331,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -340,7 +340,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -350,7 +350,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7745",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index c755f0b..29599ad 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -146,7 +146,7 @@
status = "okay";
clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
- clock-names = "du", "dclkin.0";
+ clock-names = "du.0", "dclkin.0";
ports {
port@0 {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index ebf5b7c..b3cb649 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -68,6 +68,14 @@
<0xf0000100 0x100>;
};
+ timer@f0000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xf0000200 0x100>;
+ interrupts = <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+ };
+
timer@f0000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xf0000600 0x20>;
@@ -455,6 +463,7 @@
reg = <0xfff80000 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ clock-names = "du.0";
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5a27477..e3ba00a 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -427,7 +427,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +437,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +446,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +456,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +465,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +475,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7790",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6f87550..a26f86c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -350,7 +350,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +360,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +369,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +379,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +388,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +398,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +407,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7791",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 42f3313..9f50739 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -339,7 +339,7 @@
reg = <0x20>;
remote = <&vin1>;
- port {
+ ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -399,7 +399,7 @@
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
default-input = <0>;
- port {
+ ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index bf05110..fa38397 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -336,7 +336,7 @@
#thermal-sensor-cells = <0>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +346,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +355,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +365,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +374,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +384,7 @@
status = "disabled";
};
- ipmmu_rt: mmu@ffc80000 {
+ ipmmu_rt: iommu@ffc80000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +393,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7793",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8d797d3..9dd9524 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -290,7 +290,7 @@
resets = <&cpg 407>;
};
- ipmmu_sy0: mmu@e6280000 {
+ ipmmu_sy0: iommu@e6280000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +300,7 @@
status = "disabled";
};
- ipmmu_sy1: mmu@e6290000 {
+ ipmmu_sy1: iommu@e6290000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +309,7 @@
status = "disabled";
};
- ipmmu_ds: mmu@e6740000 {
+ ipmmu_ds: iommu@e6740000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +319,7 @@
status = "disabled";
};
- ipmmu_mp: mmu@ec680000 {
+ ipmmu_mp: iommu@ec680000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +328,7 @@
status = "disabled";
};
- ipmmu_mx: mmu@fe951000 {
+ ipmmu_mx: iommu@fe951000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +338,7 @@
status = "disabled";
};
- ipmmu_gp: mmu@e62a0000 {
+ ipmmu_gp: iommu@e62a0000 {
compatible = "renesas,ipmmu-r8a7794",
"renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index fb3cf00..2ef47eb 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@
};
};
- sleep {
+ suspend {
global_pwroff: global-pwroff {
rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index c776321..d282a7b 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -128,7 +128,7 @@
assigned-clocks = <&cru SCLK_GPU>;
assigned-clock-rates = <100000000>;
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
resets = <&cru SRST_GPU>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 3d1b02f..1ac9deb 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -761,7 +761,7 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_vio@RK3066_PD_VIO {
+ power-domain@RK3066_PD_VIO {
reg = <RK3066_PD_VIO>;
clocks = <&cru ACLK_LCDC0>,
<&cru ACLK_LCDC1>,
@@ -788,7 +788,7 @@
<&qos_rga>;
};
- pd_video@RK3066_PD_VIDEO {
+ power-domain@RK3066_PD_VIDEO {
reg = <RK3066_PD_VIDEO>;
clocks = <&cru ACLK_VDPU>,
<&cru ACLK_VEPU>,
@@ -797,7 +797,7 @@
pm_qos = <&qos_vpu>;
};
- pd_gpu@RK3066_PD_GPU {
+ power-domain@RK3066_PD_GPU {
reg = <RK3066_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index c8b62bb..66a0ff1 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@
lvds-encoder {
compatible = "ti,sn75lvds83", "lvds-encoder";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- lvds_in_vop0: endpoint {
- remote-endpoint = <&vop0_out_lvds>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_in_vop0: endpoint {
+ remote-endpoint = <&vop0_out_lvds>;
+ };
};
- };
- port@1 {
- reg = <1>;
- lvds_out_panel: endpoint {
- remote-endpoint = <&panel_in_lvds>;
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
};
};
};
@@ -465,10 +470,13 @@
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
- vmmcq-supply = <&vccio_wl>;
+ vqmmc-supply = <&vccio_wl>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
brcmf: wifi@1 {
+ reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio3>;
interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 10ede65..ee8a24a 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x2000e000 0x20>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
- clock-names = "timer", "pclk";
+ clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+ clock-names = "pclk", "timer";
};
timer6: timer@200380a0 {
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x200380a0 0x20>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
- clock-names = "timer", "pclk";
+ clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+ clock-names = "pclk", "timer";
};
i2s0: i2s@1011a000 {
@@ -701,7 +701,7 @@
#address-cells = <1>;
#size-cells = <0>;
- pd_vio@RK3188_PD_VIO {
+ power-domain@RK3188_PD_VIO {
reg = <RK3188_PD_VIO>;
clocks = <&cru ACLK_LCDC0>,
<&cru ACLK_LCDC1>,
@@ -723,7 +723,7 @@
<&qos_rga>;
};
- pd_video@RK3188_PD_VIDEO {
+ power-domain@RK3188_PD_VIDEO {
reg = <RK3188_PD_VIDEO>;
clocks = <&cru ACLK_VDPU>,
<&cru ACLK_VEPU>,
@@ -732,7 +732,7 @@
pm_qos = <&qos_vpu>;
};
- pd_gpu@RK3188_PD_GPU {
+ power-domain@RK3188_PD_GPU {
reg = <RK3188_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu>;
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 5670b33..aed879d 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -46,7 +46,7 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: phy@0 {
+ phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
reg = <0>;
clocks = <&cru SCLK_MAC_PHY>;
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 679fc2b..933ef69 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -150,7 +150,7 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: phy@0 {
+ phy: ethernet-phy@0 {
compatible = "ethernet-phy-id1234.d400",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 340ed6c..140e22d 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -561,7 +561,7 @@
"pp1",
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
@@ -570,10 +570,9 @@
compatible = "rockchip,iommu";
reg = <0x20020800 0x100>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vpu_mmu";
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
+ #iommu-cells = <0>;
status = "disabled";
};
@@ -581,10 +580,9 @@
compatible = "rockchip,iommu";
reg = <0x20030480 0x40>, <0x200304c0 0x40>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vdec_mmu";
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
+ #iommu-cells = <0>;
status = "disabled";
};
@@ -614,7 +612,6 @@
compatible = "rockchip,iommu";
reg = <0x20053f00 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vop_mmu";
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
@@ -625,10 +622,9 @@
compatible = "rockchip,iommu";
reg = <0x20070800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "iep_mmu";
clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
+ #iommu-cells = <0>;
status = "disabled";
};
@@ -1033,7 +1029,7 @@
};
};
- spi-0 {
+ spi0 {
spi0_clk: spi0-clk {
rockchip,pins = <0 RK_PB1 2 &pcfg_pull_up>;
};
@@ -1051,7 +1047,7 @@
};
};
- spi-1 {
+ spi1 {
spi1_clk: spi1-clk {
rockchip,pins = <0 RK_PC7 2 &pcfg_pull_up>;
};
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 9f9e2bf..7b79a21 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
flash0-supply = <&vcc_flash>;
flash1-supply = <&vccio_pmu>;
gpio30-supply = <&vccio_pmu>;
- gpio1830 = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index ba06e9f..acfb7dc 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -357,10 +357,10 @@
audio-supply = <&vcc_18>;
bb-supply = <&vcc_io>;
dvp-supply = <&vcc_io>;
- flash0-suuply = <&vcc_18>;
+ flash0-supply = <&vcc_18>;
flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
- gpio1830 = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index cc893e1..658ceb9 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -238,8 +238,8 @@
compatible = "rockchip,rk3288-timer";
reg = <0x0 0xff810000 0x0 0x20>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>, <&cru PCLK_TIMER>;
- clock-names = "timer", "pclk";
+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clock-names = "pclk", "timer";
};
display-subsystem {
@@ -771,7 +771,7 @@
* *_HDMI HDMI
* *_MIPI_* MIPI
*/
- pd_vio@RK3288_PD_VIO {
+ power-domain@RK3288_PD_VIO {
reg = <RK3288_PD_VIO>;
clocks = <&cru ACLK_IEP>,
<&cru ACLK_ISP>,
@@ -813,7 +813,7 @@
* Note: The following 3 are HEVC(H.265) clocks,
* and on the ACLK_HEVC_NIU (NOC).
*/
- pd_hevc@RK3288_PD_HEVC {
+ power-domain@RK3288_PD_HEVC {
reg = <RK3288_PD_HEVC>;
clocks = <&cru ACLK_HEVC>,
<&cru SCLK_HEVC_CABAC>,
@@ -827,7 +827,7 @@
* (video endecoder & decoder) clocks that on the
* ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
*/
- pd_video@RK3288_PD_VIDEO {
+ power-domain@RK3288_PD_VIDEO {
reg = <RK3288_PD_VIDEO>;
clocks = <&cru ACLK_VCODEC>,
<&cru HCLK_VCODEC>;
@@ -838,7 +838,7 @@
* Note: ACLK_GPU is the GPU clock,
* and on the ACLK_GPU_NIU (NOC).
*/
- pd_gpu@RK3288_PD_GPU {
+ power-domain@RK3288_PD_GPU {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
pm_qos = <&qos_gpu_r>,
@@ -1575,7 +1575,7 @@
drive-strength = <12>;
};
- sleep {
+ suspend {
global_pwroff: global-pwroff {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 97307a4..bce0b05 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -84,7 +84,7 @@
compatible = "arm,mali-400";
reg = <0x10090000 0x10000>;
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
- clock-names = "core", "bus";
+ clock-names = "bus", "core";
assigned-clocks = <&cru ACLK_GPU>;
assigned-clock-rates = <100000000>;
resets = <&cru SRST_GPU>;
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 0e159c8..1aeac33 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -165,6 +165,10 @@
};
};
+&clocks {
+ clocks = <&fin_pll>;
+};
+
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index a9a5689..3bf6c45 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -69,6 +69,10 @@
};
};
+&clocks {
+ clocks = <&fin_pll>;
+};
+
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8ff70b8..d419b77 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -454,6 +454,7 @@
pinctrl-names = "default";
cap-sd-highspeed;
cap-mmc-highspeed;
+ keep-power-in-suspend;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 2ad642f..61822af 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -52,34 +52,26 @@
};
};
+ xxti: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xxti";
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xusbxti";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- external-clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xxti: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <0>;
- clock-output-names = "xxti";
- #clock-cells = <0>;
- };
-
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- clock-output-names = "xusbxti";
- #clock-cells = <0>;
- };
- };
-
onenand: onenand@b0600000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
@@ -100,19 +92,16 @@
};
clocks: clock-controller@e0100000 {
- compatible = "samsung,s5pv210-clock", "simple-bus";
+ compatible = "samsung,s5pv210-clock";
reg = <0xe0100000 0x10000>;
clock-names = "xxti", "xusbxti";
clocks = <&xxti>, <&xusbxti>;
#clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ };
- pmu_syscon: syscon@e0108000 {
- compatible = "samsung-s5pv210-pmu", "syscon";
- reg = <0xe0108000 0x8000>;
- };
+ pmu_syscon: syscon@e0108000 {
+ compatible = "samsung-s5pv210-pmu", "syscon";
+ reg = <0xe0108000 0x8000>;
};
pinctrl0: pinctrl@e0200000 {
@@ -128,35 +117,28 @@
};
};
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
+ pdma0: dma@e0900000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0900000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <19>;
+ clocks = <&clocks CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
- pdma0: dma@e0900000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0900000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <19>;
- clocks = <&clocks CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: dma@e0a00000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0xe0a00000 0x1000>;
- interrupt-parent = <&vic0>;
- interrupts = <20>;
- clocks = <&clocks CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
+ pdma1: dma@e0a00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xe0a00000 0x1000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <20>;
+ clocks = <&clocks CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
spi0: spi@e1300000 {
@@ -229,43 +211,36 @@
status = "disabled";
};
- audio-subsystem {
- compatible = "samsung,s5pv210-audss", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ clk_audss: clock-controller@eee10000 {
+ compatible = "samsung,s5pv210-audss-clock";
+ reg = <0xeee10000 0x1000>;
+ clock-names = "hclk", "xxti",
+ "fout_epll",
+ "sclk_audio0";
+ clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+ <&clocks FOUT_EPLL>,
+ <&clocks SCLK_AUDIO0>;
+ #clock-cells = <1>;
+ };
- clk_audss: clock-controller@eee10000 {
- compatible = "samsung,s5pv210-audss-clock";
- reg = <0xeee10000 0x1000>;
- clock-names = "hclk", "xxti",
- "fout_epll",
- "sclk_audio0";
- clocks = <&clocks DOUT_HCLKP>, <&xxti>,
- <&clocks FOUT_EPLL>,
- <&clocks SCLK_AUDIO0>;
- #clock-cells = <1>;
- };
-
- i2s0: i2s@eee30000 {
- compatible = "samsung,s5pv210-i2s";
- reg = <0xeee30000 0x1000>;
- interrupt-parent = <&vic2>;
- interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
- clock-names = "iis",
- "i2s_opclk0",
- "i2s_opclk1";
- clocks = <&clk_audss CLK_I2S>,
- <&clk_audss CLK_I2S>,
- <&clk_audss CLK_DOUT_AUD_BUS>;
- samsung,idma-addr = <0xc0010000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_bus>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
+ i2s0: i2s@eee30000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0xeee30000 0x1000>;
+ interrupt-parent = <&vic2>;
+ interrupts = <16>;
+ dma-names = "rx", "tx", "tx-sec";
+ dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ clock-names = "iis",
+ "i2s_opclk0",
+ "i2s_opclk1";
+ clocks = <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_I2S>,
+ <&clk_audss CLK_DOUT_AUD_BUS>;
+ samsung,idma-addr = <0xc0010000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
};
i2s1: i2s@e2100000 {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2e2c1a7..b05bab5 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -648,6 +648,7 @@
clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
#address-cells = <1>;
#size-cells = <1>;
+ no-memory-wc;
ranges = <0 0xf8044000 0x1420>;
};
@@ -716,7 +717,7 @@
can0: can@f8054000 {
compatible = "bosch,m_can";
- reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
+ reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
reg-names = "m_can", "message_ram";
interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
<64 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -938,7 +939,7 @@
can1: can@fc050000 {
compatible = "bosch,m_can";
- reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
+ reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
reg-names = "m_can", "message_ram";
interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
<65 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -948,7 +949,7 @@
assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
- bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
+ bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f770aac..203d40b 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1188,49 +1188,49 @@
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <12>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <13>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <14>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <15>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <16>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
twi0_clk: twi0_clk {
reg = <18>;
#clock-cells = <0>;
- atmel,clk-output-range = <0 16625000>;
+ atmel,clk-output-range = <0 41500000>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <19>;
- atmel,clk-output-range = <0 16625000>;
+ atmel,clk-output-range = <0 41500000>;
};
twi2_clk: twi2_clk {
#clock-cells = <0>;
reg = <20>;
- atmel,clk-output-range = <0 16625000>;
+ atmel,clk-output-range = <0 41500000>;
};
mci0_clk: mci0_clk {
@@ -1246,19 +1246,19 @@
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <24>;
- atmel,clk-output-range = <0 133000000>;
+ atmel,clk-output-range = <0 166000000>;
};
spi1_clk: spi1_clk {
#clock-cells = <0>;
reg = <25>;
- atmel,clk-output-range = <0 133000000>;
+ atmel,clk-output-range = <0 166000000>;
};
tcb0_clk: tcb0_clk {
#clock-cells = <0>;
reg = <26>;
- atmel,clk-output-range = <0 133000000>;
+ atmel,clk-output-range = <0 166000000>;
};
pwm_clk: pwm_clk {
@@ -1269,7 +1269,7 @@
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <29>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
dma0_clk: dma0_clk {
@@ -1300,13 +1300,13 @@
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <38>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <39>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
sha_clk: sha_clk {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index cf06a01..2470dd3 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -36,13 +36,13 @@
can0_clk: can0_clk {
#clock-cells = <0>;
reg = <40>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
can1_clk: can1_clk {
#clock-cells = <0>;
reg = <41>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 1584035..215802b 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -22,6 +22,7 @@
tcb1_clk: tcb1_clk {
#clock-cells = <0>;
reg = <27>;
+ atmel,clk-output-range = <0 166000000>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 4316bdb..cb62adb 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -41,13 +41,13 @@
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <16>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
uart1_clk: uart1_clk {
#clock-cells = <0>;
reg = <17>;
- atmel,clk-output-range = <0 66000000>;
+ atmel,clk-output-range = <0 83000000>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7..a4cef07 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -914,7 +914,7 @@
0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
- 0x0003ff00 0x8002a800 0x00000000 /* pioD */
+ 0xb003ff00 0x8002a800 0x00000000 /* pioD */
0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 4f3993c..4510308 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -710,7 +710,7 @@
};
};
- L2: l2-cache@fffef000 {
+ L2: cache-controller@fffef000 {
compatible = "arm,pl310-cache";
reg = <0xfffef000 0x1000>;
interrupts = <0 38 0x04>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 2a86e72..f261a33 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -636,7 +636,7 @@
reg = <0xffcfb100 0x80>;
};
- L2: l2-cache@fffff000 {
+ L2: cache-controller@fffff000 {
compatible = "arm,pl310-cache";
reg = <0xfffff000 0x1000>;
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -819,7 +819,7 @@
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xffd01000 0x100>;
+ reg = <0xffd00100 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
resets = <&rst L4SYSTIMER1_RESET>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index f78b4ea..e7178a6 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -755,14 +755,14 @@
status = "disabled";
};
- vica: intc@10140000 {
+ vica: interrupt-controller@10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x20>;
};
- vicb: intc@10140020 {
+ vicb: interrupt-controller@10140020 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 60e1104..d051f08 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -46,7 +46,7 @@
/* DAC */
format = "i2s";
mclk-fs = <256>;
- frame-inversion = <1>;
+ frame-inversion;
cpu {
sound-dai = <&sti_uni_player2>;
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index ba08624..4f45e71 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -112,17 +112,15 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Wake up";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 0>;
};
- button@1 {
+ button-1 {
label = "Tamper";
linux,code = <KEY_RESTART>;
gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 2b16648..8d64b52 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Wake up";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioc 13 0>;
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index e19d0fe..49ae2d7 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -79,12 +79,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_HOME>;
gpios = <&gpioa 0 0>;
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5c8a826..dd41342 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
};
timers13: timers@40001c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
};
timers14: timers@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -623,8 +619,6 @@
};
timers10: timers@40014400 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -639,8 +633,6 @@
};
timers11: timers@40014800 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -696,7 +688,7 @@
status = "disabled";
};
- rcc: rcc@40023810 {
+ rcc: rcc@40023800 {
#reset-cells = <1>;
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index a3ff049..0ce4501 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -76,6 +76,13 @@
regulator-max-microvolt = <3300000>;
};
+ vdd_dsi: vdd-dsi {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_dsi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
soc {
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
@@ -97,12 +104,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_WAKEUP>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
@@ -155,6 +160,7 @@
compatible = "orisetech,otm8009a";
reg = <0>; /* dsi virtual channel (0..3) */
reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+ power-supply = <&vdd_dsi>;
status = "okay";
port {
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index d26f93f..60680fc 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
};
timers13: timers@40001c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
};
timers14: timers@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -366,9 +362,9 @@
status = "disabled";
};
- i2c3: i2c@40005C00 {
+ i2c3: i2c@40005c00 {
compatible = "st,stm32f7-i2c";
- reg = <0x40005C00 0x400>;
+ reg = <0x40005c00 0x400>;
interrupts = <72>,
<73>;
resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -533,8 +529,6 @@
};
timers10: timers@40014400 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -549,8 +543,6 @@
};
timers11: timers@40014800 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 6f1d0ac..a4284b7 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "User";
linux,code = <KEY_HOME>;
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index c065266..82a234c 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -438,8 +438,6 @@
};
lptimer4: timer@58002c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58002c00 0x400>;
clocks = <&rcc LPTIM4_CK>;
@@ -454,8 +452,6 @@
};
lptimer5: timer@58003000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58003000 0x400>;
clocks = <&rcc LPTIM5_CK>;
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 2e4742c..7b8c3f2 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -91,6 +91,9 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
+ reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <1000>;
+
phy0: ethernet-phy@7 {
reg = <7>;
};
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index f98e037..eca469a 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -1311,12 +1311,6 @@
status = "disabled";
};
- stmmac_axi_config_0: stmmac-axi-config {
- snps,wr_osr_lmt = <0x7>;
- snps,rd_osr_lmt = <0x7>;
- snps,blen = <0 0 0 0 16 8 4>;
- };
-
ethernet0: ethernet@5800a000 {
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
@@ -1339,6 +1333,12 @@
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
status = "disabled";
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
};
usbh_ohci: usbh-ohci@5800c000 {
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 4c268b7..2265ca2 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -143,7 +143,7 @@
trips {
cpu_alert0: cpu-alert0 {
/* milliCelsius */
- temperature = <850000>;
+ temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
@@ -198,7 +198,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 6befa23..fd31da8 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -117,7 +117,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 049e6ab..73de34a 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -154,7 +154,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 32d5d45..8945dbb 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -130,7 +130,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index bb3987e..0b3d9ae 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -132,7 +132,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 01ccff7..5740f94 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_gmac_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8c8dee6..9109ca0 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -151,7 +151,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index fce2f7f..bf38c66 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -115,7 +115,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 8aebefd..1f8b45f 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -180,7 +180,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
- alloc-ranges = <0x4a000000 0x6000000>;
+ alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 9d34eab..431f702 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -131,7 +131,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_sw>;
phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
allwinner,rx-delay-ps = <700>;
allwinner,tx-delay-ps = <700>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index fb92850..d8326a5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -101,7 +101,7 @@
initial-mode = <1>; /* initialize in HUB mode */
disabled-ports = <1>;
intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
- reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
refclk-frequency = <19200000>;
};
@@ -183,7 +183,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_dldo4>;
phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 3bec3e0..6bf93e5 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -358,8 +358,8 @@
};
®_dldo3 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-name = "vdd-csi";
};
@@ -482,7 +482,8 @@
};
&usbphy {
- usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_drivevbus>;
usb1_vbus-supply = <®_vmain>;
usb2_vbus-supply = <®_vmain>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 74bb053..4e485e4 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -313,7 +313,7 @@
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-a83t-de2-clk";
- reg = <0x01000000 0x100000>;
+ reg = <0x01000000 0x10000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_PLL_DE>;
clock-names = "bus",
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d04..4c6704e 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@
pwr_led {
label = "bananapi-m2-zero:red:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
default-state = "on";
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 71fb732..babf4cf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
};
};
-&emac {
- /* LEDs changed to active high on the plus */
- /delete-property/ allwinner,leds-active-low;
-};
-
&mmc1 {
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2..b6ca45d 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index e37c30e..6056f20 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
#cooling-cells = <2>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
@@ -90,7 +90,7 @@
#cooling-cells = <2>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
@@ -100,7 +100,7 @@
#cooling-cells = <2>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
@@ -111,6 +111,15 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1..7db8950 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_dc1sw>;
status = "okay";
};
@@ -223,16 +223,16 @@
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index c9c2688..3394026 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -118,7 +118,7 @@
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-r40-de2-clk",
"allwinner,sun8i-h3-de2-clk";
- reg = <0x01000000 0x100000>;
+ reg = <0x01000000 0x10000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
@@ -266,6 +266,16 @@
#phy-cells = <1>;
};
+ ahci: sata@1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ reset-names = "ahci";
+ status = "disabled";
+ };
+
ehci1: usb@1c19000 {
compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
reg = <0x01c19000 0x100>;
@@ -557,17 +567,6 @@
#size-cells = <0>;
};
- ahci: sata@1c18000 {
- compatible = "allwinner,sun8i-r40-ahci";
- reg = <0x01c18000 0x1000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
- resets = <&ccu RST_BUS_SATA>;
- reset-names = "ahci";
- status = "disabled";
-
- };
-
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 23ba56d..50c32cf 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -105,7 +105,7 @@
display_clocks: clock@1000000 {
compatible = "allwinner,sun8i-v3s-de2-clk";
- reg = <0x01000000 0x100000>;
+ reg = <0x01000000 0x10000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
@@ -423,7 +423,7 @@
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 15c22b0..4795455 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -120,7 +120,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_dc1sw>;
status = "okay";
};
@@ -198,16 +198,16 @@
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index d3b337b..484b93d 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index bbc6335..5c3580d 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <®_cldo1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 22466af..235994a 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,15 +16,27 @@
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <1108475>;
+ regulator-max-microvolt = <1308475>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
gpios-states = <0x1>;
- states = <1100000 0>, <1300000 1>;
+ states = <1108475 0>, <1308475 1>;
};
};
&cpu0 {
cpu-supply = <®_vdd_cpux>;
};
+
+&cpu1 {
+ cpu-supply = <®_vdd_cpux>;
+};
+
+&cpu2 {
+ cpu-supply = <®_vdd_cpux>;
+};
+
+&cpu3 {
+ cpu-supply = <®_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index 39263e7..8e5cb3b 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -126,7 +126,7 @@
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <®_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
status = "okay";
};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 107eeaf..b3141c9 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -113,7 +113,7 @@
display_clocks: clock@1000000 {
/* compatible is in per SoC .dtsi file */
- reg = <0x01000000 0x100000>;
+ reg = <0x01000000 0x10000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 20137fc..394a6b4 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -185,8 +185,9 @@
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "cdev2", "dap1", "dtb", "gma",
"gmb", "gmc", "gmd", "gme", "gpu7",
- "gpv", "i2cp", "pta", "rm", "slxa",
- "slxk", "spia", "spib", "uac";
+ "gpv", "i2cp", "irrx", "irtx", "pta",
+ "rm", "slxa", "slxk", "spia", "spib",
+ "uac";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
@@ -211,7 +212,7 @@
conf_ddc {
nvidia,pins = "ddc", "dta", "dtd", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
- "sdc";
+ "sdc", "uad", "uca";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
@@ -221,10 +222,9 @@
"lvp0", "owc", "sdb";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- conf_irrx {
- nvidia,pins = "irrx", "irtx", "sdd", "spic",
- "spie", "spih", "uaa", "uab", "uad",
- "uca", "ucb";
+ conf_sdd {
+ nvidia,pins = "sdd", "spic", "spie", "spih",
+ "uaa", "uab", "ucb";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 4eddbb8..60a588c 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -571,7 +571,7 @@
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 0>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 37bd41f..151c022 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -195,16 +195,15 @@
#size-cells = <1>;
ranges;
- vic: intc@10140000 {
+ vic: interrupt-controller@10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x1000>;
- clear-mask = <0xffffffff>;
valid-mask = <0xffffffff>;
};
- sic: intc@10003000 {
+ sic: interrupt-controller@10003000 {
compatible = "arm,versatile-sic";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 06a0fdf..e7e751a 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -7,7 +7,7 @@
amba {
/* The Versatile PB is using more SIC IRQ lines than the AB */
- sic: intc@10003000 {
+ sic: interrupt-controller@10003000 {
clear-mask = <0xffffffff>;
/*
* Valid interrupt lines mask according to
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index dfae90a..ce64bfb 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -31,7 +31,7 @@
#interrupt-cells = <1>;
ranges;
- nor_flash: flash@0,00000000 {
+ nor_flash: flash@0 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
@@ -41,13 +41,13 @@
};
};
- psram@1,00000000 {
+ psram@100000000 {
compatible = "arm,vexpress-psram", "mtd-ram";
reg = <1 0x00000000 0x02000000>;
bank-width = <4>;
};
- ethernet@2,02000000 {
+ ethernet@202000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x02000000 0x10000>;
interrupts = <15>;
@@ -59,14 +59,14 @@
vddvario-supply = <&v2m_fixed_3v3>;
};
- usb@2,03000000 {
+ usb@203000000 {
compatible = "nxp,usb-isp1761";
reg = <2 0x03000000 0x20000>;
interrupts = <16>;
port1-otg;
};
- iofpga@3,00000000 {
+ iofpga@300000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 028e0ec..fa24806 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -495,7 +495,7 @@
};
ocotp: ocotp@400a5000 {
- compatible = "fsl,vf610-ocotp";
+ compatible = "fsl,vf610-ocotp", "syscon";
reg = <0x400a5000 0x1000>;
clocks = <&clks VF610_CLK_OCOTP>;
};