bionic-amd64-mbedtls-build/Dockerfile

# ubuntu-18.04/Dockerfile
#
#  Copyright (c) 2018-2021, ARM Limited, All Rights Reserved
#  SPDX-License-Identifier: Apache-2.0
#
#  Licensed under the Apache License, Version 2.0 (the "License"); you may
#  not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#  http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
#
#  This file is part of Mbed TLS (https://www.trustedfirmware.org/projects/mbed-tls/)



################################################################
#### Documentation
################################################################

# Purpose
# -------
#
# This docker file is for creating a ubuntu-18.04 platform container. It
# contains setup and installation of tools for executing same set of Mbed TLS
# tests as there are in the CI. This conatiner can be used for reproducing and
# testing failures found in the CI.


#Start with basic Ubuntu 18.04 image
FROM ubuntu:18.04

ENV DEBIAN_FRONTEND=noninteractive

# Install necessary apt tools
RUN apt-get update > /dev/null && \
    apt-get install -y apt-transport-https \
                       apt-utils \
                       software-properties-common > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

# set the working directory to /opt/slave
WORKDIR /opt/slave

# Pre-approve Oracle Java license
RUN echo debconf shared/accepted-oracle-license-v1-1 select true | debconf-set-selections && \
    echo debconf shared/accepted-oracle-license-v1-1 seen true | debconf-set-selections

# Install source control tools
RUN apt-get update > /dev/null && \
    apt-get install -y git > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

# Install Python 2.7
RUN apt-get update > /dev/null && \
    apt-get install -y python2.7 \
                       libffi-dev \
                       python-dev \
                       python-pip \
                       python-setuptools \
                       python-distutils-extra > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

# Install Python 3 pip
RUN apt-get update > /dev/null && \
    apt-get install -y python3-pip > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

# Install build tools
RUN apt-get update > /dev/null && \
    apt-get install -y cmake \
                       make \
                       valgrind \
                       doxygen \
                       graphviz \
                       lcov \
                       abi-dumper \
                       gcc-mingw-w64-i686 \
                       clang \
                       wget \
                       lsof > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

# Install ARM Compiler 5.06
RUN dpkg --add-architecture i386 && \
    apt-get update > /dev/null && \
    apt-get install -y libc6-i386 \
                       libc6:i386 \
                       libstdc++6:i386 > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

RUN wget -q https://developer.arm.com/-/media/Files/downloads/compiler/DS500-PA-00003-r5p0-22rel0.tgz && \
    tar -zxf DS500-PA-00003-r5p0-22rel0.tgz && \
    ./Installer/setup.sh --i-agree-to-the-contained-eula --no-interactive -d /usr/local/ARM_Compiler_5.06u3 --quiet && \
    rm -rf DS500-PA-00003-r5p0-22rel0.tgz releasenotes.html Installer/

ENV ARMC5_BIN_DIR=/usr/local/ARM_Compiler_5.06u3/bin/
ENV PATH=$PATH:/usr/local/ARM_Compiler_5.06u3/bin
ENV ARMLMD_LICENSE_FILE=27000@flexnet.trustedfirmware.org

# Install ARM Compiler 6.6
RUN mkdir temp && cd temp && \
    wget -q --no-check-certificate https://developer.arm.com/-/media/Files/downloads/compiler/DS500-BN-00026-r5p0-07rel0.tgz?revision=8f0d9fb0-9616-458c-b2f5-d0dac83ea93c?product=Downloads,64-bit,,Linux,6.6 -O arm6.tgz && \
    tar -zxf arm6.tgz  && ls -ltr && \
    ./install_x86_64.sh --i-agree-to-the-contained-eula --no-interactive -d /usr/local/ARM_Compiler_6.6 --quiet && \
    cd .. && rm -rf temp/

ENV ARMC6_BIN_DIR=/usr/local/ARM_Compiler_6.6/bin/

# Install arm-none-eabi-gcc
RUN wget -q https://developer.arm.com/-/media/Files/downloads/gnu-rm/5_4-2016q3/gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 -O gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 && \
    tar -xjf gcc-arm-none-eabi-5_4-2016q3-20160926-linux.tar.bz2 -C /opt

ENV PATH=/opt/gcc-arm-none-eabi-5_4-2016q3/bin:$PATH

# Install openssl 1.0.2g
RUN apt-get update > /dev/null && \
    apt-get install -y gcc-multilib \
                       p11-kit \
                       libgmp10 \
                       libgmp-dev \
                       pkg-config \
                       m4 \
                       libp11-kit-dev > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

RUN wget -q https://www.openssl.org/source/old/1.0.2/openssl-1.0.2g.tar.gz && \
    tar -zxf openssl-1.0.2g.tar.gz && cd openssl-1.0.2g && \
    ./config --openssldir=/usr/local/openssl-1.0.2g && \
    make clean && make && make install && cd .. && \
    rm -rf openssl-1.0.2g*

ENV OPENSSL=/usr/local/openssl-1.0.2g/bin/openssl
ENV PATH=/usr/local/openssl-1.0.2g/bin:$PATH

# Install openssl 1.0.1j for legacy testing
RUN wget -q https://www.openssl.org/source/old/1.0.1/openssl-1.0.1j.tar.gz && \
    tar -zxf openssl-1.0.1j.tar.gz && cd openssl-1.0.1j && \
    ./config --openssldir=/usr/local/openssl-1.0.1j && \
    make clean && make && make install && cd .. && \
    rm -rf openssl-1.0.1j*

ENV OPENSSL_LEGACY=/usr/local/openssl-1.0.1j/bin/openssl

# Install openssl 1.1.1a for ARIA cipher testing
RUN wget -q https://www.openssl.org/source/openssl-1.1.1a.tar.gz && \
    tar -zxf openssl-1.1.1a.tar.gz && cd openssl-1.1.1a && \
    ./config --prefix=/usr/local/openssl-1.1.1a -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)' && \
    make clean && make && make install && cd .. && \
    rm -rf openssl-1.1.1a*

ENV OPENSSL_NEXT=/usr/local/openssl-1.1.1a/bin/openssl

# Install Gnu TLS 3.4.10
RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-3.1.tar.gz && \
    tar -zxf nettle-3.1.tar.gz && cd nettle-3.1 && \
    ./configure --prefix=/usr/local/libnettle-3.1 --exec_prefix=/usr/local/libnettle-3.1  --disable-shared && \
    make && make install && cd .. && rm -rf nettle-3.1*

ENV PKG_CONFIG_PATH=/usr/local/libnettle-3.1/lib/pkgconfig:/usr/local/libnettle-3.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

RUN wget -q https://ftp.gnu.org/gnu/libtasn1/libtasn1-4.13.tar.gz && \
    tar -zxf libtasn1-4.13.tar.gz && cd libtasn1-4.13 && \
    ./configure && make && make install && \
    cd .. && rm -rf libtasn1-4.13*

RUN wget -q https://github.com/p11-glue/p11-kit/releases/download/0.23.10/p11-kit-0.23.10.tar.gz && \
    tar -zxf p11-kit-0.23.10.tar.gz && cd p11-kit-0.23.10 && \
    ./configure --prefix=/usr/local/libp11-kit-0.23.10 && make && make install && \
    cd .. && rm -rf p11-kit-0.23.10*

ENV PKG_CONFIG_PATH=/usr/local/lib/libp11-kit-0.23.10/lib/pkgconfig:/usr/local/lib/libp11-kit-0.23.10/lib64/pkgconfig:$PKG_CONFIG_PATH

RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.4/gnutls-3.4.10.tar.xz && \
    tar -xJf gnutls-3.4.10.tar.xz && cd gnutls-3.4.10 && \
    ./configure --prefix=/usr/local/gnutls-3.4.10 --exec_prefix=/usr/local/gnutls-3.4.10 --disable-shared && \
    make && make install && cat config.log && cd .. && \
    rm -rf gnutls-3.4.10*

ENV GNUTLS_CLI=/usr/local/gnutls-3.4.10/bin/gnutls-cli
ENV GNUTLS_SERV=/usr/local/gnutls-3.4.10/bin/gnutls-serv
ENV PATH=/usr/local/gnutls-3.4.10/bin:$PATH

# Install Gnu TLS 3.3.8 for legacy testing
RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-2.7.1.tar.gz && \
    tar -zxf nettle-2.7.1.tar.gz && cd nettle-2.7.1 && \
    ./configure --prefix=/usr/local/libnettle-2.7.1 --exec_prefix=/usr/local/libnettle-2.7.1  --disable-shared && \
    make && make install && cd .. && rm -rf nettle-2.7.1*

ENV PKG_CONFIG_PATH=/usr/local/libnettle-2.7.1/lib/pkgconfig:/usr/local/libnettle-2.7.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.3/gnutls-3.3.8.tar.xz && \
    tar -xJf gnutls-3.3.8.tar.xz && cd gnutls-3.3.8 && \
    ./configure --prefix=/usr/local/gnutls-3.3.8 --exec_prefix=/usr/local/gnutls-3.3.8 --disable-shared && \
    make && make install && cat config.log && cd .. && \
    rm -rf gnutls-3.3.8*

ENV GNUTLS_LEGACY_CLI=/usr/local/gnutls-3.3.8/bin/gnutls-cli
ENV GNUTLS_LEGACY_SERV=/usr/local/gnutls-3.3.8/bin/gnutls-serv

# Instal GNU TLS 3.6.5 for broader interoperability testing
RUN wget -q https://ftp.gnu.org/gnu/nettle/nettle-3.4.1.tar.gz && \
    tar -zxf nettle-3.4.1.tar.gz && cd nettle-3.4.1 && \
    ./configure --prefix=/usr/local/libnettle-3.4.1 --exec_prefix=/usr/local/libnettle-3.4.1  --disable-shared && \
    make && make install && cd .. && rm -rf nettle-3.4.1*

ENV PKG_CONFIG_PATH=/usr/local/libnettle-3.4.1/lib/pkgconfig:/usr/local/libnettle-3.4.1/lib64/pkgconfig:/usr/local/lib/pkgconfig

RUN apt-get update > /dev/null && \
    apt-get install -y libunistring-dev > /dev/null && \
    apt-get clean && rm -rf /var/lib/apt/lists/

RUN wget -q https://www.gnupg.org/ftp/gcrypt/gnutls/v3.6/gnutls-3.6.5.tar.xz && \
    tar -xJf gnutls-3.6.5.tar.xz && cd gnutls-3.6.5 && \
    ./configure --prefix=/usr/local/gnutls-3.6.5 --exec_prefix=/usr/local/gnutls-3.6.5 --disable-shared && \
    make && make install && cat config.log && cd .. && \
    rm -rf gnutls-3.6.5*

ENV GNUTLS_NEXT_CLI=/usr/local/gnutls-3.6.5/bin/gnutls-cli
ENV GNUTLS_NEXT_SERV=/usr/local/gnutls-3.6.5/bin/gnutls-serv

# Remove Ubuntu unattended-upgrades to prevent unwanted changes to system while it is running
RUN apt-get purge -y unattended-upgrades


# Install Python 2 pip packages
# The pip wrapper scripts can get out of sync with pip due to upgrading it outside the package manager, so invoke the module directly
RUN python2 -m pip install pip setuptools --upgrade > /dev/null

RUN python2 -m pip install yotta matplotlib > /dev/null

# Install Python pip packages
#
# The pip wrapper scripts can get out of sync with pip due to upgrading it
# outside the package manager, so invoke the module directly.
#
# Ubuntu 18.04's pip (9.0.1) doesn't support suppressing the progress bar,
# which is annoying in CI logs. Install pip<21, same as on Ubuntu 16.04
# (although we could use a later version if we wanted).
#
# Piping to cat suppresses the progress bar, but means that a failure
# won't be caught (`stuff | cat` succeeds if cat succeeds, even if `stuff`
# fails). The subsequent use of "pip config" (which requires pip >=10)
# will however fail if the installation of a more recent pip failed.
RUN python3 -m pip install 'pip<21' --upgrade | cat && \
    python3 -m pip config set global.progress_bar off && \
    python3 -m pip install setuptools --upgrade && \
    # For pylint we want a known version, as later versions may add checks at
    # any time, making CI results unpredictable.
    python3 -m pip install pylint==2.4.4 && \
    # For mypy, use the earliest version that works with our code base.
    # See https://github.com/ARMmbed/mbedtls/pull/3953 .
    python3 -m pip install mypy==0.780 && \
    # For jinja2, use the version that's in Ubuntu 20.04.
    # See https://github.com/ARMmbed/mbedtls/pull/5067#discussion_r738794607 .
    # Note that Jinja2 3.0 drops support for Python 3.5, so we need 2.x.
    python3 -m pip install Jinja2==2.10.1 types-Jinja2 && \
    true

# Set the locale
RUN apt-get clean && apt-get update && apt-get install -y locales zip python-tk
RUN locale-gen en_US.UTF-8

# Set locale for ARMCC to work
RUN locale && locale-gen "en_US.UTF-8" && dpkg-reconfigure locales

# Add user
RUN useradd -m user

# Create workspace
ARG AGENT_WORKDIR=/var/lib/builds
RUN mkdir -p ${AGENT_WORKDIR} && chown user:user ${AGENT_WORKDIR}
USER user
ENV AGENT_WORKDIR=${AGENT_WORKDIR}

WORKDIR ${AGENT_WORKDIR}

ENTRYPOINT ["bash"]