Add psa crypto C API client
To allow client programs to access the psa crypto service using the
psa crypto C api, a client adapter has been implemented that
maps the api functions to service RPC calls using the packed-c
serialization of the crypto access protocol.
The following files are derived work from the follwoing origin:
Repo https://git.trustedfirmware.org/trusted-firmware-m.git
Version: #442bc936
components/service/crypto/include/psa/crypto.h
components/service/crypto/include/psa/crypto_client_struct.h
components/service/crypto/include/psa/crypto_compat.h
components/service/crypto/include/psa/crypto_extra.h
components/service/crypto/include/psa/crypto_sizes.h
components/service/crypto/include/psa/crypto_struct.h
components/service/crypto/include/psa/crypto_types.h
components/service/crypto/include/psa/crypto_values.h
Signed-off-by: Julian Hall <julian.hall@arm.com>
Change-Id: Iac3c07d813e9245fafca3512c31d4fc09f1ad882
diff --git a/components/service/crypto/include/psa/crypto.h b/components/service/crypto/include/psa/crypto.h
new file mode 100644
index 0000000..8d03b75
--- /dev/null
+++ b/components/service/crypto/include/psa/crypto.h
@@ -0,0 +1,3758 @@
+/*
+ * Copyright (c) 2018-2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+/**
+ * \file psa/crypto.h
+ * \brief Platform Security Architecture cryptography module
+ */
+
+#ifndef PSA_CRYPTO_H
+#define PSA_CRYPTO_H
+
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* The file "crypto_types.h" declares types that encode errors,
+ * algorithms, key types, policies, etc. */
+#include "psa/crypto_types.h"
+
+/** \defgroup version API version
+ * @{
+ */
+
+/**
+ * The major version of this implementation of the PSA Crypto API
+ */
+#define PSA_CRYPTO_API_VERSION_MAJOR 1
+
+/**
+ * The minor version of this implementation of the PSA Crypto API
+ */
+#define PSA_CRYPTO_API_VERSION_MINOR 0
+
+/**@}*/
+
+/* The file "crypto_values.h" declares macros to build and analyze values
+ * of integral types defined in "crypto_types.h". */
+#include "psa/crypto_values.h"
+
+/** \defgroup initialization Library initialization
+ * @{
+ */
+
+/**
+ * \brief Library initialization.
+ *
+ * Applications must call this function before calling any other
+ * function in this module.
+ *
+ * Applications may call this function more than once. Once a call
+ * succeeds, subsequent calls are guaranteed to succeed.
+ *
+ * If the application calls other functions before calling psa_crypto_init(),
+ * the behavior is undefined. Implementations are encouraged to either perform
+ * the operation as if the library had been initialized or to return
+ * #PSA_ERROR_BAD_STATE or some other applicable error. In particular,
+ * implementations should not return a success status if the lack of
+ * initialization may have security implications, for example due to improper
+ * seeding of the random number generator.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_DATA_CORRUPT
+ */
+psa_status_t psa_crypto_init(void);
+
+/**@}*/
+
+/** \addtogroup attributes
+ * @{
+ */
+
+/** \def PSA_KEY_ATTRIBUTES_INIT
+ *
+ * This macro returns a suitable initializer for a key attribute structure
+ * of type #psa_key_attributes_t.
+ */
+#ifdef __DOXYGEN_ONLY__
+/* This is an example definition for documentation purposes.
+ * Implementations should define a suitable value in `crypto_struct.h`.
+ */
+#define PSA_KEY_ATTRIBUTES_INIT {0}
+#endif
+
+/** Return an initial value for a key attributes structure.
+ */
+static psa_key_attributes_t psa_key_attributes_init(void);
+
+/** Declare a key as persistent and set its key identifier.
+ *
+ * If the attribute structure currently declares the key as volatile (which
+ * is the default content of an attribute structure), this function sets
+ * the lifetime attribute to #PSA_KEY_LIFETIME_PERSISTENT.
+ *
+ * This function does not access storage, it merely stores the given
+ * value in the structure.
+ * The persistent key will be written to storage when the attribute
+ * structure is passed to a key creation function such as
+ * psa_import_key(), psa_generate_key(),
+ * psa_key_derivation_output_key() or psa_copy_key().
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate each of its arguments exactly once.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param key The persistent identifier for the key.
+ */
+static void psa_set_key_id( psa_key_attributes_t *attributes,
+ psa_key_id_t key );
+
+#ifdef MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
+/** Set the owner identifier of a key.
+ *
+ * When key identifiers encode key owner identifiers, psa_set_key_id() does
+ * not allow to define in key attributes the owner of volatile keys as
+ * psa_set_key_id() enforces the key to be persistent.
+ *
+ * This function allows to set in key attributes the owner identifier of a
+ * key. It is intended to be used for volatile keys. For persistent keys,
+ * it is recommended to use the PSA Cryptography API psa_set_key_id() to define
+ * the owner of a key.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param owner_id The key owner identifier.
+ */
+static void mbedtls_set_key_owner_id( psa_key_attributes_t *attributes,
+ mbedtls_key_owner_id_t owner_id );
+#endif
+
+/** Set the location of a persistent key.
+ *
+ * To make a key persistent, you must give it a persistent key identifier
+ * with psa_set_key_id(). By default, a key that has a persistent identifier
+ * is stored in the default storage area identifier by
+ * #PSA_KEY_LIFETIME_PERSISTENT. Call this function to choose a storage
+ * area, or to explicitly declare the key as volatile.
+ *
+ * This function does not access storage, it merely stores the given
+ * value in the structure.
+ * The persistent key will be written to storage when the attribute
+ * structure is passed to a key creation function such as
+ * psa_import_key(), psa_generate_key(),
+ * psa_key_derivation_output_key() or psa_copy_key().
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate each of its arguments exactly once.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param lifetime The lifetime for the key.
+ * If this is #PSA_KEY_LIFETIME_VOLATILE, the
+ * key will be volatile, and the key identifier
+ * attribute is reset to 0.
+ */
+static void psa_set_key_lifetime(psa_key_attributes_t *attributes,
+ psa_key_lifetime_t lifetime);
+
+/** Retrieve the key identifier from key attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate its argument exactly once.
+ *
+ * \param[in] attributes The key attribute structure to query.
+ *
+ * \return The persistent identifier stored in the attribute structure.
+ * This value is unspecified if the attribute structure declares
+ * the key as volatile.
+ */
+static psa_key_id_t psa_get_key_id(
+ const psa_key_attributes_t *attributes);
+
+/** Retrieve the lifetime from key attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate its argument exactly once.
+ *
+ * \param[in] attributes The key attribute structure to query.
+ *
+ * \return The lifetime value stored in the attribute structure.
+ */
+static psa_key_lifetime_t psa_get_key_lifetime(
+ const psa_key_attributes_t *attributes);
+
+/** Declare usage flags for a key.
+ *
+ * Usage flags are part of a key's usage policy. They encode what
+ * kind of operations are permitted on the key. For more details,
+ * refer to the documentation of the type #psa_key_usage_t.
+ *
+ * This function overwrites any usage flags
+ * previously set in \p attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate each of its arguments exactly once.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param usage_flags The usage flags to write.
+ */
+static void psa_set_key_usage_flags(psa_key_attributes_t *attributes,
+ psa_key_usage_t usage_flags);
+
+/** Retrieve the usage flags from key attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate its argument exactly once.
+ *
+ * \param[in] attributes The key attribute structure to query.
+ *
+ * \return The usage flags stored in the attribute structure.
+ */
+static psa_key_usage_t psa_get_key_usage_flags(
+ const psa_key_attributes_t *attributes);
+
+/** Declare the permitted algorithm policy for a key.
+ *
+ * The permitted algorithm policy of a key encodes which algorithm or
+ * algorithms are permitted to be used with this key. The following
+ * algorithm policies are supported:
+ * - 0 does not allow any cryptographic operation with the key. The key
+ * may be used for non-cryptographic actions such as exporting (if
+ * permitted by the usage flags).
+ * - An algorithm value permits this particular algorithm.
+ * - An algorithm wildcard built from #PSA_ALG_ANY_HASH allows the specified
+ * signature scheme with any hash algorithm.
+ * - An algorithm built from #PSA_ALG_AT_LEAST_THIS_LENGTH_MAC allows
+ * any MAC algorithm from the same base class (e.g. CMAC) which
+ * generates/verifies a MAC length greater than or equal to the length
+ * encoded in the wildcard algorithm.
+ * - An algorithm built from #PSA_ALG_AEAD_WITH_AT_LEAST_THIS_LENGTH_TAG
+ * allows any AEAD algorithm from the same base class (e.g. CCM) which
+ * generates/verifies a tag length greater than or equal to the length
+ * encoded in the wildcard algorithm.
+ *
+ * This function overwrites any algorithm policy
+ * previously set in \p attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate each of its arguments exactly once.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param alg The permitted algorithm policy to write.
+ */
+static void psa_set_key_algorithm(psa_key_attributes_t *attributes,
+ psa_algorithm_t alg);
+
+
+/** Retrieve the algorithm policy from key attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate its argument exactly once.
+ *
+ * \param[in] attributes The key attribute structure to query.
+ *
+ * \return The algorithm stored in the attribute structure.
+ */
+static psa_algorithm_t psa_get_key_algorithm(
+ const psa_key_attributes_t *attributes);
+
+/** Declare the type of a key.
+ *
+ * This function overwrites any key type
+ * previously set in \p attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate each of its arguments exactly once.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param type The key type to write.
+ * If this is 0, the key type in \p attributes
+ * becomes unspecified.
+ */
+static void psa_set_key_type(psa_key_attributes_t *attributes,
+ psa_key_type_t type);
+
+
+/** Declare the size of a key.
+ *
+ * This function overwrites any key size previously set in \p attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate each of its arguments exactly once.
+ *
+ * \param[out] attributes The attribute structure to write to.
+ * \param bits The key size in bits.
+ * If this is 0, the key size in \p attributes
+ * becomes unspecified. Keys of size 0 are
+ * not supported.
+ */
+static void psa_set_key_bits(psa_key_attributes_t *attributes,
+ size_t bits);
+
+/** Retrieve the key type from key attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate its argument exactly once.
+ *
+ * \param[in] attributes The key attribute structure to query.
+ *
+ * \return The key type stored in the attribute structure.
+ */
+static psa_key_type_t psa_get_key_type(const psa_key_attributes_t *attributes);
+
+/** Retrieve the key size from key attributes.
+ *
+ * This function may be declared as `static` (i.e. without external
+ * linkage). This function may be provided as a function-like macro,
+ * but in this case it must evaluate its argument exactly once.
+ *
+ * \param[in] attributes The key attribute structure to query.
+ *
+ * \return The key size stored in the attribute structure, in bits.
+ */
+static size_t psa_get_key_bits(const psa_key_attributes_t *attributes);
+
+/** Retrieve the attributes of a key.
+ *
+ * This function first resets the attribute structure as with
+ * psa_reset_key_attributes(). It then copies the attributes of
+ * the given key into the given attribute structure.
+ *
+ * \note This function may allocate memory or other resources.
+ * Once you have called this function on an attribute structure,
+ * you must call psa_reset_key_attributes() to free these resources.
+ *
+ * \param[in] key Identifier of the key to query.
+ * \param[in,out] attributes On success, the attributes of the key.
+ * On failure, equivalent to a
+ * freshly-initialized structure.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_get_key_attributes(psa_key_id_t key,
+ psa_key_attributes_t *attributes);
+
+/** Reset a key attribute structure to a freshly initialized state.
+ *
+ * You must initialize the attribute structure as described in the
+ * documentation of the type #psa_key_attributes_t before calling this
+ * function. Once the structure has been initialized, you may call this
+ * function at any time.
+ *
+ * This function frees any auxiliary resources that the structure
+ * may contain.
+ *
+ * \param[in,out] attributes The attribute structure to reset.
+ */
+void psa_reset_key_attributes(psa_key_attributes_t *attributes);
+
+/**@}*/
+
+/** \defgroup key_management Key management
+ * @{
+ */
+
+/** Remove non-essential copies of key material from memory.
+ *
+ * If the key identifier designates a volatile key, this functions does not do
+ * anything and returns successfully.
+ *
+ * If the key identifier designates a persistent key, then this function will
+ * free all resources associated with the key in volatile memory. The key
+ * data in persistent storage is not affected and the key can still be used.
+ *
+ * \param key Identifier of the key to purge.
+ *
+ * \retval #PSA_SUCCESS
+ * The key material will have been removed from memory if it is not
+ * currently required.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not a valid key identifier.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_purge_key(psa_key_id_t key);
+
+/** Make a copy of a key.
+ *
+ * Copy key material from one location to another.
+ *
+ * This function is primarily useful to copy a key from one location
+ * to another, since it populates a key using the material from
+ * another key which may have a different lifetime.
+ *
+ * This function may be used to share a key with a different party,
+ * subject to implementation-defined restrictions on key sharing.
+ *
+ * The policy on the source key must have the usage flag
+ * #PSA_KEY_USAGE_COPY set.
+ * This flag is sufficient to permit the copy if the key has the lifetime
+ * #PSA_KEY_LIFETIME_VOLATILE or #PSA_KEY_LIFETIME_PERSISTENT.
+ * Some secure elements do not provide a way to copy a key without
+ * making it extractable from the secure element. If a key is located
+ * in such a secure element, then the key must have both usage flags
+ * #PSA_KEY_USAGE_COPY and #PSA_KEY_USAGE_EXPORT in order to make
+ * a copy of the key outside the secure element.
+ *
+ * The resulting key may only be used in a way that conforms to
+ * both the policy of the original key and the policy specified in
+ * the \p attributes parameter:
+ * - The usage flags on the resulting key are the bitwise-and of the
+ * usage flags on the source policy and the usage flags in \p attributes.
+ * - If both allow the same algorithm or wildcard-based
+ * algorithm policy, the resulting key has the same algorithm policy.
+ * - If either of the policies allows an algorithm and the other policy
+ * allows a wildcard-based algorithm policy that includes this algorithm,
+ * the resulting key allows the same algorithm.
+ * - If the policies do not allow any algorithm in common, this function
+ * fails with the status #PSA_ERROR_INVALID_ARGUMENT.
+ *
+ * The effect of this function on implementation-defined attributes is
+ * implementation-defined.
+ *
+ * \param source_key The key to copy. It must allow the usage
+ * #PSA_KEY_USAGE_COPY. If a private or secret key is
+ * being copied outside of a secure element it must
+ * also allow #PSA_KEY_USAGE_EXPORT.
+ * \param[in] attributes The attributes for the new key.
+ * They are used as follows:
+ * - The key type and size may be 0. If either is
+ * nonzero, it must match the corresponding
+ * attribute of the source key.
+ * - The key location (the lifetime and, for
+ * persistent keys, the key identifier) is
+ * used directly.
+ * - The policy constraints (usage flags and
+ * algorithm policy) are combined from
+ * the source key and \p attributes so that
+ * both sets of restrictions apply, as
+ * described in the documentation of this function.
+ * \param[out] target_key On success, an identifier for the newly created
+ * key. For persistent keys, this is the key
+ * identifier defined in \p attributes.
+ * \c 0 on failure.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \p source_key is invalid.
+ * \retval #PSA_ERROR_ALREADY_EXISTS
+ * This is an attempt to create a persistent key, and there is
+ * already a persistent key with the given identifier.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The lifetime or identifier in \p attributes are invalid.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The policy constraints on the source and specified in
+ * \p attributes are incompatible.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p attributes specifies a key type or key size
+ * which does not match the attributes of the source key.
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * The source key does not have the #PSA_KEY_USAGE_COPY usage flag.
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * The source key is not exportable and its lifetime does not
+ * allow copying it to the target's lifetime.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_copy_key(psa_key_id_t source_key,
+ const psa_key_attributes_t *attributes,
+ psa_key_id_t *target_key);
+
+
+/**
+ * \brief Destroy a key.
+ *
+ * This function destroys a key from both volatile
+ * memory and, if applicable, non-volatile storage. Implementations shall
+ * make a best effort to ensure that that the key material cannot be recovered.
+ *
+ * This function also erases any metadata such as policies and frees
+ * resources associated with the key.
+ *
+ * If a key is currently in use in a multipart operation, then destroying the
+ * key will cause the multipart operation to fail.
+ *
+ * \param key Identifier of the key to erase. If this is \c 0, do nothing and
+ * return #PSA_SUCCESS.
+ *
+ * \retval #PSA_SUCCESS
+ * \p key was a valid identifier and the key material that it
+ * referred to has been erased. Alternatively, \p key is \c 0.
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * The key cannot be erased because it is
+ * read-only, either due to a policy or due to physical restrictions.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \p key is not a valid identifier nor \c 0.
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * There was an failure in communication with the cryptoprocessor.
+ * The key material may still be present in the cryptoprocessor.
+ * \retval #PSA_ERROR_DATA_INVALID
+ * This error is typically a result of either storage corruption on a
+ * cleartext storage backend, or an attempt to read data that was
+ * written by an incompatible version of the library.
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * The storage is corrupted. Implementations shall make a best effort
+ * to erase key material even in this stage, however applications
+ * should be aware that it may be impossible to guarantee that the
+ * key material is not recoverable in such cases.
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * An unexpected condition which is not a storage corruption or
+ * a communication failure occurred. The cryptoprocessor may have
+ * been compromised.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_destroy_key(psa_key_id_t key);
+
+/**@}*/
+
+/** \defgroup import_export Key import and export
+ * @{
+ */
+
+/**
+ * \brief Import a key in binary format.
+ *
+ * This function supports any output from psa_export_key(). Refer to the
+ * documentation of psa_export_public_key() for the format of public keys
+ * and to the documentation of psa_export_key() for the format for
+ * other key types.
+ *
+ * The key data determines the key size. The attributes may optionally
+ * specify a key size; in this case it must match the size determined
+ * from the key data. A key size of 0 in \p attributes indicates that
+ * the key size is solely determined by the key data.
+ *
+ * Implementations must reject an attempt to import a key of size 0.
+ *
+ * This specification supports a single format for each key type.
+ * Implementations may support other formats as long as the standard
+ * format is supported. Implementations that support other formats
+ * should ensure that the formats are clearly unambiguous so as to
+ * minimize the risk that an invalid input is accidentally interpreted
+ * according to a different format.
+ *
+ * \param[in] attributes The attributes for the new key.
+ * The key size is always determined from the
+ * \p data buffer.
+ * If the key size in \p attributes is nonzero,
+ * it must be equal to the size from \p data.
+ * \param[out] key On success, an identifier to the newly created key.
+ * For persistent keys, this is the key identifier
+ * defined in \p attributes.
+ * \c 0 on failure.
+ * \param[in] data Buffer containing the key data. The content of this
+ * buffer is interpreted according to the type declared
+ * in \p attributes.
+ * All implementations must support at least the format
+ * described in the documentation
+ * of psa_export_key() or psa_export_public_key() for
+ * the chosen type. Implementations may allow other
+ * formats, but should be conservative: implementations
+ * should err on the side of rejecting content if it
+ * may be erroneous (e.g. wrong type or truncated data).
+ * \param data_length Size of the \p data buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * If the key is persistent, the key material and the key's metadata
+ * have been saved to persistent storage.
+ * \retval #PSA_ERROR_ALREADY_EXISTS
+ * This is an attempt to create a persistent key, and there is
+ * already a persistent key with the given identifier.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * The key type or key size is not supported, either by the
+ * implementation in general or in this particular persistent location.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The key attributes, as a whole, are invalid.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The key data is not correctly formatted.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The size in \p attributes is nonzero and does not match the size
+ * of the key data.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_import_key(const psa_key_attributes_t *attributes,
+ const uint8_t *data,
+ size_t data_length,
+ psa_key_id_t *key);
+
+
+
+/**
+ * \brief Export a key in binary format.
+ *
+ * The output of this function can be passed to psa_import_key() to
+ * create an equivalent object.
+ *
+ * If the implementation of psa_import_key() supports other formats
+ * beyond the format specified here, the output from psa_export_key()
+ * must use the representation specified here, not the original
+ * representation.
+ *
+ * For standard key types, the output format is as follows:
+ *
+ * - For symmetric keys (including MAC keys), the format is the
+ * raw bytes of the key.
+ * - For DES, the key data consists of 8 bytes. The parity bits must be
+ * correct.
+ * - For Triple-DES, the format is the concatenation of the
+ * two or three DES keys.
+ * - For RSA key pairs (#PSA_KEY_TYPE_RSA_KEY_PAIR), the format
+ * is the non-encrypted DER encoding of the representation defined by
+ * PKCS\#1 (RFC 8017) as `RSAPrivateKey`, version 0.
+ * ```
+ * RSAPrivateKey ::= SEQUENCE {
+ * version INTEGER, -- must be 0
+ * modulus INTEGER, -- n
+ * publicExponent INTEGER, -- e
+ * privateExponent INTEGER, -- d
+ * prime1 INTEGER, -- p
+ * prime2 INTEGER, -- q
+ * exponent1 INTEGER, -- d mod (p-1)
+ * exponent2 INTEGER, -- d mod (q-1)
+ * coefficient INTEGER, -- (inverse of q) mod p
+ * }
+ * ```
+ * - For elliptic curve key pairs (key types for which
+ * #PSA_KEY_TYPE_IS_ECC_KEY_PAIR is true), the format is
+ * a representation of the private value as a `ceiling(m/8)`-byte string
+ * where `m` is the bit size associated with the curve, i.e. the bit size
+ * of the order of the curve's coordinate field. This byte string is
+ * in little-endian order for Montgomery curves (curve types
+ * `PSA_ECC_FAMILY_CURVEXXX`), and in big-endian order for Weierstrass
+ * curves (curve types `PSA_ECC_FAMILY_SECTXXX`, `PSA_ECC_FAMILY_SECPXXX`
+ * and `PSA_ECC_FAMILY_BRAINPOOL_PXXX`).
+ * For Weierstrass curves, this is the content of the `privateKey` field of
+ * the `ECPrivateKey` format defined by RFC 5915. For Montgomery curves,
+ * the format is defined by RFC 7748, and output is masked according to §5.
+ * - For Diffie-Hellman key exchange key pairs (key types for which
+ * #PSA_KEY_TYPE_IS_DH_KEY_PAIR is true), the
+ * format is the representation of the private key `x` as a big-endian byte
+ * string. The length of the byte string is the private key size in bytes
+ * (leading zeroes are not stripped).
+ * - For public keys (key types for which #PSA_KEY_TYPE_IS_PUBLIC_KEY is
+ * true), the format is the same as for psa_export_public_key().
+ *
+ * The policy on the key must have the usage flag #PSA_KEY_USAGE_EXPORT set.
+ *
+ * \param key Identifier of the key to export. It must allow the
+ * usage #PSA_KEY_USAGE_EXPORT, unless it is a public
+ * key.
+ * \param[out] data Buffer where the key data is to be written.
+ * \param data_size Size of the \p data buffer in bytes.
+ * \param[out] data_length On success, the number of bytes
+ * that make up the key data.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * The key does not have the #PSA_KEY_USAGE_EXPORT flag.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p data buffer is too small. You can determine a
+ * sufficient buffer size by calling
+ * #PSA_EXPORT_KEY_OUTPUT_SIZE(\c type, \c bits)
+ * where \c type is the key type
+ * and \c bits is the key size in bits.
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_export_key(psa_key_id_t key,
+ uint8_t *data,
+ size_t data_size,
+ size_t *data_length);
+
+/**
+ * \brief Export a public key or the public part of a key pair in binary format.
+ *
+ * The output of this function can be passed to psa_import_key() to
+ * create an object that is equivalent to the public key.
+ *
+ * This specification supports a single format for each key type.
+ * Implementations may support other formats as long as the standard
+ * format is supported. Implementations that support other formats
+ * should ensure that the formats are clearly unambiguous so as to
+ * minimize the risk that an invalid input is accidentally interpreted
+ * according to a different format.
+ *
+ * For standard key types, the output format is as follows:
+ * - For RSA public keys (#PSA_KEY_TYPE_RSA_PUBLIC_KEY), the DER encoding of
+ * the representation defined by RFC 3279 §2.3.1 as `RSAPublicKey`.
+ * ```
+ * RSAPublicKey ::= SEQUENCE {
+ * modulus INTEGER, -- n
+ * publicExponent INTEGER } -- e
+ * ```
+ * - For elliptic curve public keys (key types for which
+ * #PSA_KEY_TYPE_IS_ECC_PUBLIC_KEY is true), the format is the uncompressed
+ * representation defined by SEC1 §2.3.3 as the content of an ECPoint.
+ * Let `m` be the bit size associated with the curve, i.e. the bit size of
+ * `q` for a curve over `F_q`. The representation consists of:
+ * - The byte 0x04;
+ * - `x_P` as a `ceiling(m/8)`-byte string, big-endian;
+ * - `y_P` as a `ceiling(m/8)`-byte string, big-endian.
+ * - For Diffie-Hellman key exchange public keys (key types for which
+ * #PSA_KEY_TYPE_IS_DH_PUBLIC_KEY is true),
+ * the format is the representation of the public key `y = g^x mod p` as a
+ * big-endian byte string. The length of the byte string is the length of the
+ * base prime `p` in bytes.
+ *
+ * Exporting a public key object or the public part of a key pair is
+ * always permitted, regardless of the key's usage flags.
+ *
+ * \param key Identifier of the key to export.
+ * \param[out] data Buffer where the key data is to be written.
+ * \param data_size Size of the \p data buffer in bytes.
+ * \param[out] data_length On success, the number of bytes
+ * that make up the key data.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The key is neither a public key nor a key pair.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p data buffer is too small. You can determine a
+ * sufficient buffer size by calling
+ * #PSA_EXPORT_KEY_OUTPUT_SIZE(#PSA_KEY_TYPE_PUBLIC_KEY_OF_KEY_PAIR(\c type), \c bits)
+ * where \c type is the key type
+ * and \c bits is the key size in bits.
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_export_public_key(psa_key_id_t key,
+ uint8_t *data,
+ size_t data_size,
+ size_t *data_length);
+
+
+
+/**@}*/
+
+/** \defgroup hash Message digests
+ * @{
+ */
+
+/** Calculate the hash (digest) of a message.
+ *
+ * \note To verify the hash of a message against an
+ * expected value, use psa_hash_compare() instead.
+ *
+ * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_HASH(\p alg) is true).
+ * \param[in] input Buffer containing the message to hash.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] hash Buffer where the hash is to be written.
+ * \param hash_size Size of the \p hash buffer in bytes.
+ * \param[out] hash_length On success, the number of bytes
+ * that make up the hash value. This is always
+ * #PSA_HASH_LENGTH(\p alg).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a hash algorithm.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \p hash_size is too small
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_compute(psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ uint8_t *hash,
+ size_t hash_size,
+ size_t *hash_length);
+
+/** Calculate the hash (digest) of a message and compare it with a
+ * reference value.
+ *
+ * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_HASH(\p alg) is true).
+ * \param[in] input Buffer containing the message to hash.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] hash Buffer containing the expected hash value.
+ * \param hash_length Size of the \p hash buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * The expected hash is identical to the actual hash of the input.
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The hash of the message was calculated successfully, but it
+ * differs from the expected hash.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a hash algorithm.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p input_length or \p hash_length do not match the hash size for \p alg
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_compare(psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ const uint8_t *hash,
+ size_t hash_length);
+
+/** The type of the state data structure for multipart hash operations.
+ *
+ * Before calling any function on a hash operation object, the application must
+ * initialize it by any of the following means:
+ * - Set the structure to all-bits-zero, for example:
+ * \code
+ * psa_hash_operation_t operation;
+ * memset(&operation, 0, sizeof(operation));
+ * \endcode
+ * - Initialize the structure to logical zero values, for example:
+ * \code
+ * psa_hash_operation_t operation = {0};
+ * \endcode
+ * - Initialize the structure to the initializer #PSA_HASH_OPERATION_INIT,
+ * for example:
+ * \code
+ * psa_hash_operation_t operation = PSA_HASH_OPERATION_INIT;
+ * \endcode
+ * - Assign the result of the function psa_hash_operation_init()
+ * to the structure, for example:
+ * \code
+ * psa_hash_operation_t operation;
+ * operation = psa_hash_operation_init();
+ * \endcode
+ *
+ * This is an implementation-defined \c struct. Applications should not
+ * make any assumptions about the content of this structure except
+ * as directed by the documentation of a specific implementation. */
+typedef struct psa_hash_operation_s psa_hash_operation_t;
+
+/** \def PSA_HASH_OPERATION_INIT
+ *
+ * This macro returns a suitable initializer for a hash operation object
+ * of type #psa_hash_operation_t.
+ */
+#ifdef __DOXYGEN_ONLY__
+/* This is an example definition for documentation purposes.
+ * Implementations should define a suitable value in `crypto_struct.h`.
+ */
+#define PSA_HASH_OPERATION_INIT {0}
+#endif
+
+/** Return an initial value for a hash operation object.
+ */
+static psa_hash_operation_t psa_hash_operation_init(void);
+
+/** Set up a multipart hash operation.
+ *
+ * The sequence of operations to calculate a hash (message digest)
+ * is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_hash_operation_t, e.g. #PSA_HASH_OPERATION_INIT.
+ * -# Call psa_hash_setup() to specify the algorithm.
+ * -# Call psa_hash_update() zero, one or more times, passing a fragment
+ * of the message each time. The hash that is calculated is the hash
+ * of the concatenation of these messages in order.
+ * -# To calculate the hash, call psa_hash_finish().
+ * To compare the hash with an expected value, call psa_hash_verify().
+ *
+ * If an error occurs at any step after a call to psa_hash_setup(), the
+ * operation will need to be reset by a call to psa_hash_abort(). The
+ * application may call psa_hash_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_hash_setup(), the application must
+ * eventually terminate the operation. The following events terminate an
+ * operation:
+ * - A successful call to psa_hash_finish() or psa_hash_verify().
+ * - A call to psa_hash_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_hash_operation_t and not yet in use.
+ * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_HASH(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not a supported hash algorithm.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p alg is not a hash algorithm.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_setup(psa_hash_operation_t *operation,
+ psa_algorithm_t alg);
+
+/** Add a message fragment to a multipart hash operation.
+ *
+ * The application must call psa_hash_setup() before calling this function.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_hash_abort().
+ *
+ * \param[in,out] operation Active hash operation.
+ * \param[in] input Buffer containing the message fragment to hash.
+ * \param input_length Size of the \p input buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it muct be active).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_update(psa_hash_operation_t *operation,
+ const uint8_t *input,
+ size_t input_length);
+
+/** Finish the calculation of the hash of a message.
+ *
+ * The application must call psa_hash_setup() before calling this function.
+ * This function calculates the hash of the message formed by concatenating
+ * the inputs passed to preceding calls to psa_hash_update().
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_hash_abort().
+ *
+ * \warning Applications should not call this function if they expect
+ * a specific value for the hash. Call psa_hash_verify() instead.
+ * Beware that comparing integrity or authenticity data such as
+ * hash values with a function such as \c memcmp is risky
+ * because the time taken by the comparison may leak information
+ * about the hashed data which could allow an attacker to guess
+ * a valid hash and thereby bypass security controls.
+ *
+ * \param[in,out] operation Active hash operation.
+ * \param[out] hash Buffer where the hash is to be written.
+ * \param hash_size Size of the \p hash buffer in bytes.
+ * \param[out] hash_length On success, the number of bytes
+ * that make up the hash value. This is always
+ * #PSA_HASH_LENGTH(\c alg) where \c alg is the
+ * hash algorithm that is calculated.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p hash buffer is too small. You can determine a
+ * sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg)
+ * where \c alg is the hash algorithm that is calculated.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_finish(psa_hash_operation_t *operation,
+ uint8_t *hash,
+ size_t hash_size,
+ size_t *hash_length);
+
+/** Finish the calculation of the hash of a message and compare it with
+ * an expected value.
+ *
+ * The application must call psa_hash_setup() before calling this function.
+ * This function calculates the hash of the message formed by concatenating
+ * the inputs passed to preceding calls to psa_hash_update(). It then
+ * compares the calculated hash with the expected hash passed as a
+ * parameter to this function.
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_hash_abort().
+ *
+ * \note Implementations shall make the best effort to ensure that the
+ * comparison between the actual hash and the expected hash is performed
+ * in constant time.
+ *
+ * \param[in,out] operation Active hash operation.
+ * \param[in] hash Buffer containing the expected hash value.
+ * \param hash_length Size of the \p hash buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * The expected hash is identical to the actual hash of the message.
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The hash of the message was calculated successfully, but it
+ * differs from the expected hash.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_verify(psa_hash_operation_t *operation,
+ const uint8_t *hash,
+ size_t hash_length);
+
+/** Abort a hash operation.
+ *
+ * Aborting an operation frees all associated resources except for the
+ * \p operation structure itself. Once aborted, the operation object
+ * can be reused for another operation by calling
+ * psa_hash_setup() again.
+ *
+ * You may call this function any time after the operation object has
+ * been initialized by one of the methods described in #psa_hash_operation_t.
+ *
+ * In particular, calling psa_hash_abort() after the operation has been
+ * terminated by a call to psa_hash_abort(), psa_hash_finish() or
+ * psa_hash_verify() is safe and has no effect.
+ *
+ * \param[in,out] operation Initialized hash operation.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_abort(psa_hash_operation_t *operation);
+
+/** Clone a hash operation.
+ *
+ * This function copies the state of an ongoing hash operation to
+ * a new operation object. In other words, this function is equivalent
+ * to calling psa_hash_setup() on \p target_operation with the same
+ * algorithm that \p source_operation was set up for, then
+ * psa_hash_update() on \p target_operation with the same input that
+ * that was passed to \p source_operation. After this function returns, the
+ * two objects are independent, i.e. subsequent calls involving one of
+ * the objects do not affect the other object.
+ *
+ * \param[in] source_operation The active hash operation to clone.
+ * \param[in,out] target_operation The operation object to set up.
+ * It must be initialized but not active.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_BAD_STATE
+ * The \p source_operation state is not valid (it must be active).
+ * \retval #PSA_ERROR_BAD_STATE
+ * The \p target_operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_hash_clone(const psa_hash_operation_t *source_operation,
+ psa_hash_operation_t *target_operation);
+
+/**@}*/
+
+/** \defgroup MAC Message authentication codes
+ * @{
+ */
+
+/** Calculate the MAC (message authentication code) of a message.
+ *
+ * \note To verify the MAC of a message against an
+ * expected value, use psa_mac_verify() instead.
+ * Beware that comparing integrity or authenticity data such as
+ * MAC values with a function such as \c memcmp is risky
+ * because the time taken by the comparison may leak information
+ * about the MAC value which could allow an attacker to guess
+ * a valid MAC and thereby bypass security controls.
+ *
+ * \param key Identifier of the key to use for the operation. It
+ * must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE.
+ * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_MAC(\p alg) is true).
+ * \param[in] input Buffer containing the input message.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] mac Buffer where the MAC value is to be written.
+ * \param mac_size Size of the \p mac buffer in bytes.
+ * \param[out] mac_length On success, the number of bytes
+ * that make up the MAC value.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a MAC algorithm.
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \p mac_size is too small
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * The key could not be retrieved from storage.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_compute(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ uint8_t *mac,
+ size_t mac_size,
+ size_t *mac_length);
+
+/** Calculate the MAC of a message and compare it with a reference value.
+ *
+ * \param key Identifier of the key to use for the operation. It
+ * must allow the usage PSA_KEY_USAGE_VERIFY_MESSAGE.
+ * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_MAC(\p alg) is true).
+ * \param[in] input Buffer containing the input message.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] mac Buffer containing the expected MAC value.
+ * \param mac_length Size of the \p mac buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * The expected MAC is identical to the actual MAC of the input.
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The MAC of the message was calculated successfully, but it
+ * differs from the expected value.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a MAC algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * The key could not be retrieved from storage.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_verify(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ const uint8_t *mac,
+ size_t mac_length);
+
+/** The type of the state data structure for multipart MAC operations.
+ *
+ * Before calling any function on a MAC operation object, the application must
+ * initialize it by any of the following means:
+ * - Set the structure to all-bits-zero, for example:
+ * \code
+ * psa_mac_operation_t operation;
+ * memset(&operation, 0, sizeof(operation));
+ * \endcode
+ * - Initialize the structure to logical zero values, for example:
+ * \code
+ * psa_mac_operation_t operation = {0};
+ * \endcode
+ * - Initialize the structure to the initializer #PSA_MAC_OPERATION_INIT,
+ * for example:
+ * \code
+ * psa_mac_operation_t operation = PSA_MAC_OPERATION_INIT;
+ * \endcode
+ * - Assign the result of the function psa_mac_operation_init()
+ * to the structure, for example:
+ * \code
+ * psa_mac_operation_t operation;
+ * operation = psa_mac_operation_init();
+ * \endcode
+ *
+ * This is an implementation-defined \c struct. Applications should not
+ * make any assumptions about the content of this structure except
+ * as directed by the documentation of a specific implementation. */
+typedef struct psa_mac_operation_s psa_mac_operation_t;
+
+/** \def PSA_MAC_OPERATION_INIT
+ *
+ * This macro returns a suitable initializer for a MAC operation object of type
+ * #psa_mac_operation_t.
+ */
+#ifdef __DOXYGEN_ONLY__
+/* This is an example definition for documentation purposes.
+ * Implementations should define a suitable value in `crypto_struct.h`.
+ */
+#define PSA_MAC_OPERATION_INIT {0}
+#endif
+
+/** Return an initial value for a MAC operation object.
+ */
+static psa_mac_operation_t psa_mac_operation_init(void);
+
+/** Set up a multipart MAC calculation operation.
+ *
+ * This function sets up the calculation of the MAC
+ * (message authentication code) of a byte string.
+ * To verify the MAC of a message against an
+ * expected value, use psa_mac_verify_setup() instead.
+ *
+ * The sequence of operations to calculate a MAC is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT.
+ * -# Call psa_mac_sign_setup() to specify the algorithm and key.
+ * -# Call psa_mac_update() zero, one or more times, passing a fragment
+ * of the message each time. The MAC that is calculated is the MAC
+ * of the concatenation of these messages in order.
+ * -# At the end of the message, call psa_mac_sign_finish() to finish
+ * calculating the MAC value and retrieve it.
+ *
+ * If an error occurs at any step after a call to psa_mac_sign_setup(), the
+ * operation will need to be reset by a call to psa_mac_abort(). The
+ * application may call psa_mac_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_mac_sign_setup(), the application must
+ * eventually terminate the operation through one of the following methods:
+ * - A successful call to psa_mac_sign_finish().
+ * - A call to psa_mac_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_mac_operation_t and not yet in use.
+ * \param key Identifier of the key to use for the operation. It
+ * must remain valid until the operation terminates.
+ * It must allow the usage PSA_KEY_USAGE_SIGN_MESSAGE.
+ * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_MAC(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a MAC algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * The key could not be retrieved from storage.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_sign_setup(psa_mac_operation_t *operation,
+ psa_key_id_t key,
+ psa_algorithm_t alg);
+
+/** Set up a multipart MAC verification operation.
+ *
+ * This function sets up the verification of the MAC
+ * (message authentication code) of a byte string against an expected value.
+ *
+ * The sequence of operations to verify a MAC is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_mac_operation_t, e.g. #PSA_MAC_OPERATION_INIT.
+ * -# Call psa_mac_verify_setup() to specify the algorithm and key.
+ * -# Call psa_mac_update() zero, one or more times, passing a fragment
+ * of the message each time. The MAC that is calculated is the MAC
+ * of the concatenation of these messages in order.
+ * -# At the end of the message, call psa_mac_verify_finish() to finish
+ * calculating the actual MAC of the message and verify it against
+ * the expected value.
+ *
+ * If an error occurs at any step after a call to psa_mac_verify_setup(), the
+ * operation will need to be reset by a call to psa_mac_abort(). The
+ * application may call psa_mac_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_mac_verify_setup(), the application must
+ * eventually terminate the operation through one of the following methods:
+ * - A successful call to psa_mac_verify_finish().
+ * - A call to psa_mac_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_mac_operation_t and not yet in use.
+ * \param key Identifier of the key to use for the operation. It
+ * must remain valid until the operation terminates.
+ * It must allow the usage
+ * PSA_KEY_USAGE_VERIFY_MESSAGE.
+ * \param alg The MAC algorithm to compute (\c PSA_ALG_XXX value
+ * such that #PSA_ALG_IS_MAC(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c key is not compatible with \c alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \c alg is not supported or is not a MAC algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * The key could not be retrieved from storage
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_verify_setup(psa_mac_operation_t *operation,
+ psa_key_id_t key,
+ psa_algorithm_t alg);
+
+/** Add a message fragment to a multipart MAC operation.
+ *
+ * The application must call psa_mac_sign_setup() or psa_mac_verify_setup()
+ * before calling this function.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_mac_abort().
+ *
+ * \param[in,out] operation Active MAC operation.
+ * \param[in] input Buffer containing the message fragment to add to
+ * the MAC calculation.
+ * \param input_length Size of the \p input buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_update(psa_mac_operation_t *operation,
+ const uint8_t *input,
+ size_t input_length);
+
+/** Finish the calculation of the MAC of a message.
+ *
+ * The application must call psa_mac_sign_setup() before calling this function.
+ * This function calculates the MAC of the message formed by concatenating
+ * the inputs passed to preceding calls to psa_mac_update().
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_mac_abort().
+ *
+ * \warning Applications should not call this function if they expect
+ * a specific value for the MAC. Call psa_mac_verify_finish() instead.
+ * Beware that comparing integrity or authenticity data such as
+ * MAC values with a function such as \c memcmp is risky
+ * because the time taken by the comparison may leak information
+ * about the MAC value which could allow an attacker to guess
+ * a valid MAC and thereby bypass security controls.
+ *
+ * \param[in,out] operation Active MAC operation.
+ * \param[out] mac Buffer where the MAC value is to be written.
+ * \param mac_size Size of the \p mac buffer in bytes.
+ * \param[out] mac_length On success, the number of bytes
+ * that make up the MAC value. This is always
+ * #PSA_MAC_LENGTH(\c key_type, \c key_bits, \c alg)
+ * where \c key_type and \c key_bits are the type and
+ * bit-size respectively of the key and \c alg is the
+ * MAC algorithm that is calculated.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be an active mac sign
+ * operation).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p mac buffer is too small. You can determine a
+ * sufficient buffer size by calling PSA_MAC_LENGTH().
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_sign_finish(psa_mac_operation_t *operation,
+ uint8_t *mac,
+ size_t mac_size,
+ size_t *mac_length);
+
+/** Finish the calculation of the MAC of a message and compare it with
+ * an expected value.
+ *
+ * The application must call psa_mac_verify_setup() before calling this function.
+ * This function calculates the MAC of the message formed by concatenating
+ * the inputs passed to preceding calls to psa_mac_update(). It then
+ * compares the calculated MAC with the expected MAC passed as a
+ * parameter to this function.
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_mac_abort().
+ *
+ * \note Implementations shall make the best effort to ensure that the
+ * comparison between the actual MAC and the expected MAC is performed
+ * in constant time.
+ *
+ * \param[in,out] operation Active MAC operation.
+ * \param[in] mac Buffer containing the expected MAC value.
+ * \param mac_length Size of the \p mac buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * The expected MAC is identical to the actual MAC of the message.
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The MAC of the message was calculated successfully, but it
+ * differs from the expected MAC.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be an active mac verify
+ * operation).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_verify_finish(psa_mac_operation_t *operation,
+ const uint8_t *mac,
+ size_t mac_length);
+
+/** Abort a MAC operation.
+ *
+ * Aborting an operation frees all associated resources except for the
+ * \p operation structure itself. Once aborted, the operation object
+ * can be reused for another operation by calling
+ * psa_mac_sign_setup() or psa_mac_verify_setup() again.
+ *
+ * You may call this function any time after the operation object has
+ * been initialized by one of the methods described in #psa_mac_operation_t.
+ *
+ * In particular, calling psa_mac_abort() after the operation has been
+ * terminated by a call to psa_mac_abort(), psa_mac_sign_finish() or
+ * psa_mac_verify_finish() is safe and has no effect.
+ *
+ * \param[in,out] operation Initialized MAC operation.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_mac_abort(psa_mac_operation_t *operation);
+
+/**@}*/
+
+/** \defgroup cipher Symmetric ciphers
+ * @{
+ */
+
+/** Encrypt a message using a symmetric cipher.
+ *
+ * This function encrypts a message with a random IV (initialization
+ * vector). Use the multipart operation interface with a
+ * #psa_cipher_operation_t object to provide other forms of IV.
+ *
+ * \param key Identifier of the key to use for the operation.
+ * It must allow the usage #PSA_KEY_USAGE_ENCRYPT.
+ * \param alg The cipher algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_CIPHER(\p alg) is true).
+ * \param[in] input Buffer containing the message to encrypt.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] output Buffer where the output is to be written.
+ * The output contains the IV followed by
+ * the ciphertext proper.
+ * \param output_size Size of the \p output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the output.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a cipher algorithm.
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_encrypt(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/** Decrypt a message using a symmetric cipher.
+ *
+ * This function decrypts a message encrypted with a symmetric cipher.
+ *
+ * \param key Identifier of the key to use for the operation.
+ * It must remain valid until the operation
+ * terminates. It must allow the usage
+ * #PSA_KEY_USAGE_DECRYPT.
+ * \param alg The cipher algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_CIPHER(\p alg) is true).
+ * \param[in] input Buffer containing the message to decrypt.
+ * This consists of the IV followed by the
+ * ciphertext proper.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] output Buffer where the plaintext is to be written.
+ * \param output_size Size of the \p output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the output.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a cipher algorithm.
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_decrypt(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/** The type of the state data structure for multipart cipher operations.
+ *
+ * Before calling any function on a cipher operation object, the application
+ * must initialize it by any of the following means:
+ * - Set the structure to all-bits-zero, for example:
+ * \code
+ * psa_cipher_operation_t operation;
+ * memset(&operation, 0, sizeof(operation));
+ * \endcode
+ * - Initialize the structure to logical zero values, for example:
+ * \code
+ * psa_cipher_operation_t operation = {0};
+ * \endcode
+ * - Initialize the structure to the initializer #PSA_CIPHER_OPERATION_INIT,
+ * for example:
+ * \code
+ * psa_cipher_operation_t operation = PSA_CIPHER_OPERATION_INIT;
+ * \endcode
+ * - Assign the result of the function psa_cipher_operation_init()
+ * to the structure, for example:
+ * \code
+ * psa_cipher_operation_t operation;
+ * operation = psa_cipher_operation_init();
+ * \endcode
+ *
+ * This is an implementation-defined \c struct. Applications should not
+ * make any assumptions about the content of this structure except
+ * as directed by the documentation of a specific implementation. */
+typedef struct psa_cipher_operation_s psa_cipher_operation_t;
+
+/** \def PSA_CIPHER_OPERATION_INIT
+ *
+ * This macro returns a suitable initializer for a cipher operation object of
+ * type #psa_cipher_operation_t.
+ */
+#ifdef __DOXYGEN_ONLY__
+/* This is an example definition for documentation purposes.
+ * Implementations should define a suitable value in `crypto_struct.h`.
+ */
+#define PSA_CIPHER_OPERATION_INIT {0}
+#endif
+
+/** Return an initial value for a cipher operation object.
+ */
+static psa_cipher_operation_t psa_cipher_operation_init(void);
+
+/** Set the key for a multipart symmetric encryption operation.
+ *
+ * The sequence of operations to encrypt a message with a symmetric cipher
+ * is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_cipher_operation_t, e.g.
+ * #PSA_CIPHER_OPERATION_INIT.
+ * -# Call psa_cipher_encrypt_setup() to specify the algorithm and key.
+ * -# Call either psa_cipher_generate_iv() or psa_cipher_set_iv() to
+ * generate or set the IV (initialization vector). You should use
+ * psa_cipher_generate_iv() unless the protocol you are implementing
+ * requires a specific IV value.
+ * -# Call psa_cipher_update() zero, one or more times, passing a fragment
+ * of the message each time.
+ * -# Call psa_cipher_finish().
+ *
+ * If an error occurs at any step after a call to psa_cipher_encrypt_setup(),
+ * the operation will need to be reset by a call to psa_cipher_abort(). The
+ * application may call psa_cipher_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_cipher_encrypt_setup(), the application must
+ * eventually terminate the operation. The following events terminate an
+ * operation:
+ * - A successful call to psa_cipher_finish().
+ * - A call to psa_cipher_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_cipher_operation_t and not yet in use.
+ * \param key Identifier of the key to use for the operation.
+ * It must remain valid until the operation
+ * terminates. It must allow the usage
+ * #PSA_KEY_USAGE_ENCRYPT.
+ * \param alg The cipher algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_CIPHER(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a cipher algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_encrypt_setup(psa_cipher_operation_t *operation,
+ psa_key_id_t key,
+ psa_algorithm_t alg);
+
+/** Set the key for a multipart symmetric decryption operation.
+ *
+ * The sequence of operations to decrypt a message with a symmetric cipher
+ * is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_cipher_operation_t, e.g.
+ * #PSA_CIPHER_OPERATION_INIT.
+ * -# Call psa_cipher_decrypt_setup() to specify the algorithm and key.
+ * -# Call psa_cipher_set_iv() with the IV (initialization vector) for the
+ * decryption. If the IV is prepended to the ciphertext, you can call
+ * psa_cipher_update() on a buffer containing the IV followed by the
+ * beginning of the message.
+ * -# Call psa_cipher_update() zero, one or more times, passing a fragment
+ * of the message each time.
+ * -# Call psa_cipher_finish().
+ *
+ * If an error occurs at any step after a call to psa_cipher_decrypt_setup(),
+ * the operation will need to be reset by a call to psa_cipher_abort(). The
+ * application may call psa_cipher_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_cipher_decrypt_setup(), the application must
+ * eventually terminate the operation. The following events terminate an
+ * operation:
+ * - A successful call to psa_cipher_finish().
+ * - A call to psa_cipher_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_cipher_operation_t and not yet in use.
+ * \param key Identifier of the key to use for the operation.
+ * It must remain valid until the operation
+ * terminates. It must allow the usage
+ * #PSA_KEY_USAGE_DECRYPT.
+ * \param alg The cipher algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_CIPHER(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not a cipher algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_decrypt_setup(psa_cipher_operation_t *operation,
+ psa_key_id_t key,
+ psa_algorithm_t alg);
+
+/** Generate an IV for a symmetric encryption operation.
+ *
+ * This function generates a random IV (initialization vector), nonce
+ * or initial counter value for the encryption operation as appropriate
+ * for the chosen algorithm, key type and key size.
+ *
+ * The application must call psa_cipher_encrypt_setup() before
+ * calling this function.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_cipher_abort().
+ *
+ * \param[in,out] operation Active cipher operation.
+ * \param[out] iv Buffer where the generated IV is to be written.
+ * \param iv_size Size of the \p iv buffer in bytes.
+ * \param[out] iv_length On success, the number of bytes of the
+ * generated IV.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, with no IV set).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p iv buffer is too small.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_generate_iv(psa_cipher_operation_t *operation,
+ uint8_t *iv,
+ size_t iv_size,
+ size_t *iv_length);
+
+/** Set the IV for a symmetric encryption or decryption operation.
+ *
+ * This function sets the IV (initialization vector), nonce
+ * or initial counter value for the encryption or decryption operation.
+ *
+ * The application must call psa_cipher_encrypt_setup() before
+ * calling this function.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_cipher_abort().
+ *
+ * \note When encrypting, applications should use psa_cipher_generate_iv()
+ * instead of this function, unless implementing a protocol that requires
+ * a non-random IV.
+ *
+ * \param[in,out] operation Active cipher operation.
+ * \param[in] iv Buffer containing the IV to use.
+ * \param iv_length Size of the IV in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be an active cipher
+ * encrypt operation, with no IV set).
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The size of \p iv is not acceptable for the chosen algorithm,
+ * or the chosen algorithm does not use an IV.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_set_iv(psa_cipher_operation_t *operation,
+ const uint8_t *iv,
+ size_t iv_length);
+
+/** Encrypt or decrypt a message fragment in an active cipher operation.
+ *
+ * Before calling this function, you must:
+ * 1. Call either psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup().
+ * The choice of setup function determines whether this function
+ * encrypts or decrypts its input.
+ * 2. If the algorithm requires an IV, call psa_cipher_generate_iv()
+ * (recommended when encrypting) or psa_cipher_set_iv().
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_cipher_abort().
+ *
+ * \param[in,out] operation Active cipher operation.
+ * \param[in] input Buffer containing the message fragment to
+ * encrypt or decrypt.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] output Buffer where the output is to be written.
+ * \param output_size Size of the \p output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the returned output.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, with an IV set
+ * if required for the algorithm).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p output buffer is too small.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_update(psa_cipher_operation_t *operation,
+ const uint8_t *input,
+ size_t input_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/** Finish encrypting or decrypting a message in a cipher operation.
+ *
+ * The application must call psa_cipher_encrypt_setup() or
+ * psa_cipher_decrypt_setup() before calling this function. The choice
+ * of setup function determines whether this function encrypts or
+ * decrypts its input.
+ *
+ * This function finishes the encryption or decryption of the message
+ * formed by concatenating the inputs passed to preceding calls to
+ * psa_cipher_update().
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_cipher_abort().
+ *
+ * \param[in,out] operation Active cipher operation.
+ * \param[out] output Buffer where the output is to be written.
+ * \param output_size Size of the \p output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the returned output.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total input size passed to this operation is not valid for
+ * this particular algorithm. For example, the algorithm is a based
+ * on block cipher and requires a whole number of blocks, but the
+ * total input size is not a multiple of the block size.
+ * \retval #PSA_ERROR_INVALID_PADDING
+ * This is a decryption operation for an algorithm that includes
+ * padding, and the ciphertext does not contain valid padding.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, with an IV set
+ * if required for the algorithm).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p output buffer is too small.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_finish(psa_cipher_operation_t *operation,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/** Abort a cipher operation.
+ *
+ * Aborting an operation frees all associated resources except for the
+ * \p operation structure itself. Once aborted, the operation object
+ * can be reused for another operation by calling
+ * psa_cipher_encrypt_setup() or psa_cipher_decrypt_setup() again.
+ *
+ * You may call this function any time after the operation object has
+ * been initialized as described in #psa_cipher_operation_t.
+ *
+ * In particular, calling psa_cipher_abort() after the operation has been
+ * terminated by a call to psa_cipher_abort() or psa_cipher_finish()
+ * is safe and has no effect.
+ *
+ * \param[in,out] operation Initialized cipher operation.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_cipher_abort(psa_cipher_operation_t *operation);
+
+/**@}*/
+
+/** \defgroup aead Authenticated encryption with associated data (AEAD)
+ * @{
+ */
+
+/** Process an authenticated encryption operation.
+ *
+ * \param key Identifier of the key to use for the
+ * operation. It must allow the usage
+ * #PSA_KEY_USAGE_ENCRYPT.
+ * \param alg The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(\p alg) is true).
+ * \param[in] nonce Nonce or IV to use.
+ * \param nonce_length Size of the \p nonce buffer in bytes.
+ * \param[in] additional_data Additional data that will be authenticated
+ * but not encrypted.
+ * \param additional_data_length Size of \p additional_data in bytes.
+ * \param[in] plaintext Data that will be authenticated and
+ * encrypted.
+ * \param plaintext_length Size of \p plaintext in bytes.
+ * \param[out] ciphertext Output buffer for the authenticated and
+ * encrypted data. The additional data is not
+ * part of this output. For algorithms where the
+ * encrypted data and the authentication tag
+ * are defined as separate outputs, the
+ * authentication tag is appended to the
+ * encrypted data.
+ * \param ciphertext_size Size of the \p ciphertext buffer in bytes.
+ * This must be at least
+ * #PSA_AEAD_ENCRYPT_OUTPUT_SIZE(\p alg,
+ * \p plaintext_length).
+ * \param[out] ciphertext_length On success, the size of the output
+ * in the \p ciphertext buffer.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not an AEAD algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \p ciphertext_size is too small
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_encrypt(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *nonce,
+ size_t nonce_length,
+ const uint8_t *additional_data,
+ size_t additional_data_length,
+ const uint8_t *plaintext,
+ size_t plaintext_length,
+ uint8_t *ciphertext,
+ size_t ciphertext_size,
+ size_t *ciphertext_length);
+
+/** Process an authenticated decryption operation.
+ *
+ * \param key Identifier of the key to use for the
+ * operation. It must allow the usage
+ * #PSA_KEY_USAGE_DECRYPT.
+ * \param alg The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(\p alg) is true).
+ * \param[in] nonce Nonce or IV to use.
+ * \param nonce_length Size of the \p nonce buffer in bytes.
+ * \param[in] additional_data Additional data that has been authenticated
+ * but not encrypted.
+ * \param additional_data_length Size of \p additional_data in bytes.
+ * \param[in] ciphertext Data that has been authenticated and
+ * encrypted. For algorithms where the
+ * encrypted data and the authentication tag
+ * are defined as separate inputs, the buffer
+ * must contain the encrypted data followed
+ * by the authentication tag.
+ * \param ciphertext_length Size of \p ciphertext in bytes.
+ * \param[out] plaintext Output buffer for the decrypted data.
+ * \param plaintext_size Size of the \p plaintext buffer in bytes.
+ * This must be at least
+ * #PSA_AEAD_DECRYPT_OUTPUT_SIZE(\p alg,
+ * \p ciphertext_length).
+ * \param[out] plaintext_length On success, the size of the output
+ * in the \p plaintext buffer.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The ciphertext is not authentic.
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not an AEAD algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \p plaintext_size or \p nonce_length is too small
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_decrypt(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *nonce,
+ size_t nonce_length,
+ const uint8_t *additional_data,
+ size_t additional_data_length,
+ const uint8_t *ciphertext,
+ size_t ciphertext_length,
+ uint8_t *plaintext,
+ size_t plaintext_size,
+ size_t *plaintext_length);
+
+/** The type of the state data structure for multipart AEAD operations.
+ *
+ * Before calling any function on an AEAD operation object, the application
+ * must initialize it by any of the following means:
+ * - Set the structure to all-bits-zero, for example:
+ * \code
+ * psa_aead_operation_t operation;
+ * memset(&operation, 0, sizeof(operation));
+ * \endcode
+ * - Initialize the structure to logical zero values, for example:
+ * \code
+ * psa_aead_operation_t operation = {0};
+ * \endcode
+ * - Initialize the structure to the initializer #PSA_AEAD_OPERATION_INIT,
+ * for example:
+ * \code
+ * psa_aead_operation_t operation = PSA_AEAD_OPERATION_INIT;
+ * \endcode
+ * - Assign the result of the function psa_aead_operation_init()
+ * to the structure, for example:
+ * \code
+ * psa_aead_operation_t operation;
+ * operation = psa_aead_operation_init();
+ * \endcode
+ *
+ * This is an implementation-defined \c struct. Applications should not
+ * make any assumptions about the content of this structure except
+ * as directed by the documentation of a specific implementation. */
+typedef struct psa_aead_operation_s psa_aead_operation_t;
+
+/** \def PSA_AEAD_OPERATION_INIT
+ *
+ * This macro returns a suitable initializer for an AEAD operation object of
+ * type #psa_aead_operation_t.
+ */
+#ifdef __DOXYGEN_ONLY__
+/* This is an example definition for documentation purposes.
+ * Implementations should define a suitable value in `crypto_struct.h`.
+ */
+#define PSA_AEAD_OPERATION_INIT {0}
+#endif
+
+/** Return an initial value for an AEAD operation object.
+ */
+static psa_aead_operation_t psa_aead_operation_init(void);
+
+/** Set the key for a multipart authenticated encryption operation.
+ *
+ * The sequence of operations to encrypt a message with authentication
+ * is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_aead_operation_t, e.g.
+ * #PSA_AEAD_OPERATION_INIT.
+ * -# Call psa_aead_encrypt_setup() to specify the algorithm and key.
+ * -# If needed, call psa_aead_set_lengths() to specify the length of the
+ * inputs to the subsequent calls to psa_aead_update_ad() and
+ * psa_aead_update(). See the documentation of psa_aead_set_lengths()
+ * for details.
+ * -# Call either psa_aead_generate_nonce() or psa_aead_set_nonce() to
+ * generate or set the nonce. You should use
+ * psa_aead_generate_nonce() unless the protocol you are implementing
+ * requires a specific nonce value.
+ * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment
+ * of the non-encrypted additional authenticated data each time.
+ * -# Call psa_aead_update() zero, one or more times, passing a fragment
+ * of the message to encrypt each time.
+ * -# Call psa_aead_finish().
+ *
+ * If an error occurs at any step after a call to psa_aead_encrypt_setup(),
+ * the operation will need to be reset by a call to psa_aead_abort(). The
+ * application may call psa_aead_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_aead_encrypt_setup(), the application must
+ * eventually terminate the operation. The following events terminate an
+ * operation:
+ * - A successful call to psa_aead_finish().
+ * - A call to psa_aead_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_aead_operation_t and not yet in use.
+ * \param key Identifier of the key to use for the operation.
+ * It must remain valid until the operation
+ * terminates. It must allow the usage
+ * #PSA_KEY_USAGE_ENCRYPT.
+ * \param alg The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not an AEAD algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_encrypt_setup(psa_aead_operation_t *operation,
+ psa_key_id_t key,
+ psa_algorithm_t alg);
+
+/** Set the key for a multipart authenticated decryption operation.
+ *
+ * The sequence of operations to decrypt a message with authentication
+ * is as follows:
+ * -# Allocate an operation object which will be passed to all the functions
+ * listed here.
+ * -# Initialize the operation object with one of the methods described in the
+ * documentation for #psa_aead_operation_t, e.g.
+ * #PSA_AEAD_OPERATION_INIT.
+ * -# Call psa_aead_decrypt_setup() to specify the algorithm and key.
+ * -# If needed, call psa_aead_set_lengths() to specify the length of the
+ * inputs to the subsequent calls to psa_aead_update_ad() and
+ * psa_aead_update(). See the documentation of psa_aead_set_lengths()
+ * for details.
+ * -# Call psa_aead_set_nonce() with the nonce for the decryption.
+ * -# Call psa_aead_update_ad() zero, one or more times, passing a fragment
+ * of the non-encrypted additional authenticated data each time.
+ * -# Call psa_aead_update() zero, one or more times, passing a fragment
+ * of the ciphertext to decrypt each time.
+ * -# Call psa_aead_verify().
+ *
+ * If an error occurs at any step after a call to psa_aead_decrypt_setup(),
+ * the operation will need to be reset by a call to psa_aead_abort(). The
+ * application may call psa_aead_abort() at any time after the operation
+ * has been initialized.
+ *
+ * After a successful call to psa_aead_decrypt_setup(), the application must
+ * eventually terminate the operation. The following events terminate an
+ * operation:
+ * - A successful call to psa_aead_verify().
+ * - A call to psa_aead_abort().
+ *
+ * \param[in,out] operation The operation object to set up. It must have
+ * been initialized as per the documentation for
+ * #psa_aead_operation_t and not yet in use.
+ * \param key Identifier of the key to use for the operation.
+ * It must remain valid until the operation
+ * terminates. It must allow the usage
+ * #PSA_KEY_USAGE_DECRYPT.
+ * \param alg The AEAD algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_AEAD(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p key is not compatible with \p alg.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not supported or is not an AEAD algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_decrypt_setup(psa_aead_operation_t *operation,
+ psa_key_id_t key,
+ psa_algorithm_t alg);
+
+/** Generate a random nonce for an authenticated encryption operation.
+ *
+ * This function generates a random nonce for the authenticated encryption
+ * operation with an appropriate size for the chosen algorithm, key type
+ * and key size.
+ *
+ * The application must call psa_aead_encrypt_setup() before
+ * calling this function.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param[out] nonce Buffer where the generated nonce is to be
+ * written.
+ * \param nonce_size Size of the \p nonce buffer in bytes.
+ * \param[out] nonce_length On success, the number of bytes of the
+ * generated nonce.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be an active aead encrypt
+ * operation, with no nonce set).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p nonce buffer is too small.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_generate_nonce(psa_aead_operation_t *operation,
+ uint8_t *nonce,
+ size_t nonce_size,
+ size_t *nonce_length);
+
+/** Set the nonce for an authenticated encryption or decryption operation.
+ *
+ * This function sets the nonce for the authenticated
+ * encryption or decryption operation.
+ *
+ * The application must call psa_aead_encrypt_setup() or
+ * psa_aead_decrypt_setup() before calling this function.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \note When encrypting, applications should use psa_aead_generate_nonce()
+ * instead of this function, unless implementing a protocol that requires
+ * a non-random IV.
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param[in] nonce Buffer containing the nonce to use.
+ * \param nonce_length Size of the nonce in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, with no nonce
+ * set).
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The size of \p nonce is not acceptable for the chosen algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_set_nonce(psa_aead_operation_t *operation,
+ const uint8_t *nonce,
+ size_t nonce_length);
+
+/** Declare the lengths of the message and additional data for AEAD.
+ *
+ * The application must call this function before calling
+ * psa_aead_update_ad() or psa_aead_update() if the algorithm for
+ * the operation requires it. If the algorithm does not require it,
+ * calling this function is optional, but if this function is called
+ * then the implementation must enforce the lengths.
+ *
+ * You may call this function before or after setting the nonce with
+ * psa_aead_set_nonce() or psa_aead_generate_nonce().
+ *
+ * - For #PSA_ALG_CCM, calling this function is required.
+ * - For the other AEAD algorithms defined in this specification, calling
+ * this function is not required.
+ * - For vendor-defined algorithm, refer to the vendor documentation.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param ad_length Size of the non-encrypted additional
+ * authenticated data in bytes.
+ * \param plaintext_length Size of the plaintext to encrypt in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, and
+ * psa_aead_update_ad() and psa_aead_update() must not have been
+ * called yet).
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * At least one of the lengths is not acceptable for the chosen
+ * algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_set_lengths(psa_aead_operation_t *operation,
+ size_t ad_length,
+ size_t plaintext_length);
+
+/** Pass additional data to an active AEAD operation.
+ *
+ * Additional data is authenticated, but not encrypted.
+ *
+ * You may call this function multiple times to pass successive fragments
+ * of the additional data. You may not call this function after passing
+ * data to encrypt or decrypt with psa_aead_update().
+ *
+ * Before calling this function, you must:
+ * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup().
+ * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce().
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS,
+ * there is no guarantee that the input is valid. Therefore, until
+ * you have called psa_aead_verify() and it has returned #PSA_SUCCESS,
+ * treat the input as untrusted and prepare to undo any action that
+ * depends on the input if psa_aead_verify() returns an error status.
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param[in] input Buffer containing the fragment of
+ * additional data.
+ * \param input_length Size of the \p input buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, have a nonce
+ * set, have lengths set if required by the algorithm, and
+ * psa_aead_update() must not have been called yet).
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total input length overflows the additional data length that
+ * was previously specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_update_ad(psa_aead_operation_t *operation,
+ const uint8_t *input,
+ size_t input_length);
+
+/** Encrypt or decrypt a message fragment in an active AEAD operation.
+ *
+ * Before calling this function, you must:
+ * 1. Call either psa_aead_encrypt_setup() or psa_aead_decrypt_setup().
+ * The choice of setup function determines whether this function
+ * encrypts or decrypts its input.
+ * 2. Set the nonce with psa_aead_generate_nonce() or psa_aead_set_nonce().
+ * 3. Call psa_aead_update_ad() to pass all the additional data.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \warning When decrypting, until psa_aead_verify() has returned #PSA_SUCCESS,
+ * there is no guarantee that the input is valid. Therefore, until
+ * you have called psa_aead_verify() and it has returned #PSA_SUCCESS:
+ * - Do not use the output in any way other than storing it in a
+ * confidential location. If you take any action that depends
+ * on the tentative decrypted data, this action will need to be
+ * undone if the input turns out not to be valid. Furthermore,
+ * if an adversary can observe that this action took place
+ * (for example through timing), they may be able to use this
+ * fact as an oracle to decrypt any message encrypted with the
+ * same key.
+ * - In particular, do not copy the output anywhere but to a
+ * memory or storage space that you have exclusive access to.
+ *
+ * This function does not require the input to be aligned to any
+ * particular block boundary. If the implementation can only process
+ * a whole block at a time, it must consume all the input provided, but
+ * it may delay the end of the corresponding output until a subsequent
+ * call to psa_aead_update(), psa_aead_finish() or psa_aead_verify()
+ * provides sufficient input. The amount of data that can be delayed
+ * in this way is bounded by #PSA_AEAD_UPDATE_OUTPUT_SIZE.
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param[in] input Buffer containing the message fragment to
+ * encrypt or decrypt.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[out] output Buffer where the output is to be written.
+ * \param output_size Size of the \p output buffer in bytes.
+ * This must be at least
+ * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c alg,
+ * \p input_length) where \c alg is the
+ * algorithm that is being calculated.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the returned output.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active, have a nonce
+ * set, and have lengths set if required by the algorithm).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p output buffer is too small.
+ * You can determine a sufficient buffer size by calling
+ * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c alg, \p input_length)
+ * where \c alg is the algorithm that is being calculated.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total length of input to psa_aead_update_ad() so far is
+ * less than the additional data length that was previously
+ * specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total input length overflows the plaintext length that
+ * was previously specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_update(psa_aead_operation_t *operation,
+ const uint8_t *input,
+ size_t input_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/** Finish encrypting a message in an AEAD operation.
+ *
+ * The operation must have been set up with psa_aead_encrypt_setup().
+ *
+ * This function finishes the authentication of the additional data
+ * formed by concatenating the inputs passed to preceding calls to
+ * psa_aead_update_ad() with the plaintext formed by concatenating the
+ * inputs passed to preceding calls to psa_aead_update().
+ *
+ * This function has two output buffers:
+ * - \p ciphertext contains trailing ciphertext that was buffered from
+ * preceding calls to psa_aead_update().
+ * - \p tag contains the authentication tag. Its length is always
+ * #PSA_AEAD_TAG_LENGTH(\c alg) where \c alg is the AEAD algorithm
+ * that the operation performs.
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param[out] ciphertext Buffer where the last part of the ciphertext
+ * is to be written.
+ * \param ciphertext_size Size of the \p ciphertext buffer in bytes.
+ * This must be at least
+ * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c alg) where
+ * \c alg is the algorithm that is being
+ * calculated.
+ * \param[out] ciphertext_length On success, the number of bytes of
+ * returned ciphertext.
+ * \param[out] tag Buffer where the authentication tag is
+ * to be written.
+ * \param tag_size Size of the \p tag buffer in bytes.
+ * This must be at least
+ * #PSA_AEAD_TAG_LENGTH(\c alg) where \c alg is
+ * the algorithm that is being calculated.
+ * \param[out] tag_length On success, the number of bytes
+ * that make up the returned tag.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be an active encryption
+ * operation with a nonce set).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p ciphertext or \p tag buffer is too small.
+ * You can determine a sufficient buffer size for \p ciphertext by
+ * calling #PSA_AEAD_FINISH_OUTPUT_SIZE(\c alg)
+ * where \c alg is the algorithm that is being calculated.
+ * You can determine a sufficient buffer size for \p tag by
+ * calling #PSA_AEAD_TAG_LENGTH(\c alg).
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total length of input to psa_aead_update_ad() so far is
+ * less than the additional data length that was previously
+ * specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total length of input to psa_aead_update() so far is
+ * less than the plaintext length that was previously
+ * specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_finish(psa_aead_operation_t *operation,
+ uint8_t *ciphertext,
+ size_t ciphertext_size,
+ size_t *ciphertext_length,
+ uint8_t *tag,
+ size_t tag_size,
+ size_t *tag_length);
+
+/** Finish authenticating and decrypting a message in an AEAD operation.
+ *
+ * The operation must have been set up with psa_aead_decrypt_setup().
+ *
+ * This function finishes the authenticated decryption of the message
+ * components:
+ *
+ * - The additional data consisting of the concatenation of the inputs
+ * passed to preceding calls to psa_aead_update_ad().
+ * - The ciphertext consisting of the concatenation of the inputs passed to
+ * preceding calls to psa_aead_update().
+ * - The tag passed to this function call.
+ *
+ * If the authentication tag is correct, this function outputs any remaining
+ * plaintext and reports success. If the authentication tag is not correct,
+ * this function returns #PSA_ERROR_INVALID_SIGNATURE.
+ *
+ * When this function returns successfuly, the operation becomes inactive.
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_aead_abort().
+ *
+ * \note Implementations shall make the best effort to ensure that the
+ * comparison between the actual tag and the expected tag is performed
+ * in constant time.
+ *
+ * \param[in,out] operation Active AEAD operation.
+ * \param[out] plaintext Buffer where the last part of the plaintext
+ * is to be written. This is the remaining data
+ * from previous calls to psa_aead_update()
+ * that could not be processed until the end
+ * of the input.
+ * \param plaintext_size Size of the \p plaintext buffer in bytes.
+ * This must be at least
+ * #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c alg) where
+ * \c alg is the algorithm that is being
+ * calculated.
+ * \param[out] plaintext_length On success, the number of bytes of
+ * returned plaintext.
+ * \param[in] tag Buffer containing the authentication tag.
+ * \param tag_length Size of the \p tag buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The calculations were successful, but the authentication tag is
+ * not correct.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be an active decryption
+ * operation with a nonce set).
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p plaintext buffer is too small.
+ * You can determine a sufficient buffer size for \p plaintext by
+ * calling #PSA_AEAD_VERIFY_OUTPUT_SIZE(\c alg)
+ * where \c alg is the algorithm that is being calculated.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total length of input to psa_aead_update_ad() so far is
+ * less than the additional data length that was previously
+ * specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The total length of input to psa_aead_update() so far is
+ * less than the plaintext length that was previously
+ * specified with psa_aead_set_lengths().
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_verify(psa_aead_operation_t *operation,
+ uint8_t *plaintext,
+ size_t plaintext_size,
+ size_t *plaintext_length,
+ const uint8_t *tag,
+ size_t tag_length);
+
+/** Abort an AEAD operation.
+ *
+ * Aborting an operation frees all associated resources except for the
+ * \p operation structure itself. Once aborted, the operation object
+ * can be reused for another operation by calling
+ * psa_aead_encrypt_setup() or psa_aead_decrypt_setup() again.
+ *
+ * You may call this function any time after the operation object has
+ * been initialized as described in #psa_aead_operation_t.
+ *
+ * In particular, calling psa_aead_abort() after the operation has been
+ * terminated by a call to psa_aead_abort(), psa_aead_finish() or
+ * psa_aead_verify() is safe and has no effect.
+ *
+ * \param[in,out] operation Initialized AEAD operation.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_aead_abort(psa_aead_operation_t *operation);
+
+/**@}*/
+
+/** \defgroup asymmetric Asymmetric cryptography
+ * @{
+ */
+
+/**
+ * \brief Sign a hash or short message with a private key.
+ *
+ * Note that to perform a hash-and-sign signature algorithm, you must
+ * first calculate the hash by calling psa_hash_setup(), psa_hash_update()
+ * and psa_hash_finish(). Then pass the resulting hash as the \p hash
+ * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
+ * to determine the hash algorithm to use.
+ *
+ * \param key Identifier of the key to use for the operation.
+ * It must be an asymmetric key pair. The key must
+ * allow the usage #PSA_KEY_USAGE_SIGN_HASH.
+ * \param alg A signature algorithm that is compatible with
+ * the type of \p key.
+ * \param[in] hash The hash or message to sign.
+ * \param hash_length Size of the \p hash buffer in bytes.
+ * \param[out] signature Buffer where the signature is to be written.
+ * \param signature_size Size of the \p signature buffer in bytes.
+ * \param[out] signature_length On success, the number of bytes
+ * that make up the returned signature value.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p signature buffer is too small. You can
+ * determine a sufficient buffer size by calling
+ * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
+ * where \c key_type and \c key_bits are the type and bit-size
+ * respectively of \p key.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_sign_hash(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *hash,
+ size_t hash_length,
+ uint8_t *signature,
+ size_t signature_size,
+ size_t *signature_length);
+
+/**
+ * \brief Verify the signature a hash or short message using a public key.
+ *
+ * Note that to perform a hash-and-sign signature algorithm, you must
+ * first calculate the hash by calling psa_hash_setup(), psa_hash_update()
+ * and psa_hash_finish(). Then pass the resulting hash as the \p hash
+ * parameter to this function. You can use #PSA_ALG_SIGN_GET_HASH(\p alg)
+ * to determine the hash algorithm to use.
+ *
+ * \param key Identifier of the key to use for the operation. It
+ * must be a public key or an asymmetric key pair. The
+ * key must allow the usage
+ * #PSA_KEY_USAGE_VERIFY_HASH.
+ * \param alg A signature algorithm that is compatible with
+ * the type of \p key.
+ * \param[in] hash The hash or message whose signature is to be
+ * verified.
+ * \param hash_length Size of the \p hash buffer in bytes.
+ * \param[in] signature Buffer containing the signature to verify.
+ * \param signature_length Size of the \p signature buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * The signature is valid.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_SIGNATURE
+ * The calculation was perfomed successfully, but the passed
+ * signature is not a valid signature.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_verify_hash(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *hash,
+ size_t hash_length,
+ const uint8_t *signature,
+ size_t signature_length);
+
+/**
+ * \brief Encrypt a short message with a public key.
+ *
+ * \param key Identifer of the key to use for the operation.
+ * It must be a public key or an asymmetric key
+ * pair. It must allow the usage
+ * #PSA_KEY_USAGE_ENCRYPT.
+ * \param alg An asymmetric encryption algorithm that is
+ * compatible with the type of \p key.
+ * \param[in] input The message to encrypt.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[in] salt A salt or label, if supported by the
+ * encryption algorithm.
+ * If the algorithm does not support a
+ * salt, pass \c NULL.
+ * If the algorithm supports an optional
+ * salt and you do not want to pass a salt,
+ * pass \c NULL.
+ *
+ * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
+ * supported.
+ * \param salt_length Size of the \p salt buffer in bytes.
+ * If \p salt is \c NULL, pass 0.
+ * \param[out] output Buffer where the encrypted message is to
+ * be written.
+ * \param output_size Size of the \p output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the returned output.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p output buffer is too small. You can
+ * determine a sufficient buffer size by calling
+ * #PSA_ASYMMETRIC_ENCRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
+ * where \c key_type and \c key_bits are the type and bit-size
+ * respectively of \p key.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_asymmetric_encrypt(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ const uint8_t *salt,
+ size_t salt_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/**
+ * \brief Decrypt a short message with a private key.
+ *
+ * \param key Identifier of the key to use for the operation.
+ * It must be an asymmetric key pair. It must
+ * allow the usage #PSA_KEY_USAGE_DECRYPT.
+ * \param alg An asymmetric encryption algorithm that is
+ * compatible with the type of \p key.
+ * \param[in] input The message to decrypt.
+ * \param input_length Size of the \p input buffer in bytes.
+ * \param[in] salt A salt or label, if supported by the
+ * encryption algorithm.
+ * If the algorithm does not support a
+ * salt, pass \c NULL.
+ * If the algorithm supports an optional
+ * salt and you do not want to pass a salt,
+ * pass \c NULL.
+ *
+ * - For #PSA_ALG_RSA_PKCS1V15_CRYPT, no salt is
+ * supported.
+ * \param salt_length Size of the \p salt buffer in bytes.
+ * If \p salt is \c NULL, pass 0.
+ * \param[out] output Buffer where the decrypted message is to
+ * be written.
+ * \param output_size Size of the \c output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the returned output.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * The size of the \p output buffer is too small. You can
+ * determine a sufficient buffer size by calling
+ * #PSA_ASYMMETRIC_DECRYPT_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg)
+ * where \c key_type and \c key_bits are the type and bit-size
+ * respectively of \p key.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_INVALID_PADDING
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_asymmetric_decrypt(psa_key_id_t key,
+ psa_algorithm_t alg,
+ const uint8_t *input,
+ size_t input_length,
+ const uint8_t *salt,
+ size_t salt_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/**@}*/
+
+/** \defgroup key_derivation Key derivation and pseudorandom generation
+ * @{
+ */
+
+/** The type of the state data structure for key derivation operations.
+ *
+ * Before calling any function on a key derivation operation object, the
+ * application must initialize it by any of the following means:
+ * - Set the structure to all-bits-zero, for example:
+ * \code
+ * psa_key_derivation_operation_t operation;
+ * memset(&operation, 0, sizeof(operation));
+ * \endcode
+ * - Initialize the structure to logical zero values, for example:
+ * \code
+ * psa_key_derivation_operation_t operation = {0};
+ * \endcode
+ * - Initialize the structure to the initializer #PSA_KEY_DERIVATION_OPERATION_INIT,
+ * for example:
+ * \code
+ * psa_key_derivation_operation_t operation = PSA_KEY_DERIVATION_OPERATION_INIT;
+ * \endcode
+ * - Assign the result of the function psa_key_derivation_operation_init()
+ * to the structure, for example:
+ * \code
+ * psa_key_derivation_operation_t operation;
+ * operation = psa_key_derivation_operation_init();
+ * \endcode
+ *
+ * This is an implementation-defined \c struct. Applications should not
+ * make any assumptions about the content of this structure except
+ * as directed by the documentation of a specific implementation.
+ */
+typedef struct psa_key_derivation_s psa_key_derivation_operation_t;
+
+/** \def PSA_KEY_DERIVATION_OPERATION_INIT
+ *
+ * This macro returns a suitable initializer for a key derivation operation
+ * object of type #psa_key_derivation_operation_t.
+ */
+#ifdef __DOXYGEN_ONLY__
+/* This is an example definition for documentation purposes.
+ * Implementations should define a suitable value in `crypto_struct.h`.
+ */
+#define PSA_KEY_DERIVATION_OPERATION_INIT {0}
+#endif
+
+/** Return an initial value for a key derivation operation object.
+ */
+static psa_key_derivation_operation_t psa_key_derivation_operation_init(void);
+
+/** Set up a key derivation operation.
+ *
+ * A key derivation algorithm takes some inputs and uses them to generate
+ * a byte stream in a deterministic way.
+ * This byte stream can be used to produce keys and other
+ * cryptographic material.
+ *
+ * To derive a key:
+ * -# Start with an initialized object of type #psa_key_derivation_operation_t.
+ * -# Call psa_key_derivation_setup() to select the algorithm.
+ * -# Provide the inputs for the key derivation by calling
+ * psa_key_derivation_input_bytes() or psa_key_derivation_input_key()
+ * as appropriate. Which inputs are needed, in what order, and whether
+ * they may be keys and if so of what type depends on the algorithm.
+ * -# Optionally set the operation's maximum capacity with
+ * psa_key_derivation_set_capacity(). You may do this before, in the middle
+ * of or after providing inputs. For some algorithms, this step is mandatory
+ * because the output depends on the maximum capacity.
+ * -# To derive a key, call psa_key_derivation_output_key().
+ * To derive a byte string for a different purpose, call
+ * psa_key_derivation_output_bytes().
+ * Successive calls to these functions use successive output bytes
+ * calculated by the key derivation algorithm.
+ * -# Clean up the key derivation operation object with
+ * psa_key_derivation_abort().
+ *
+ * If this function returns an error, the key derivation operation object is
+ * not changed.
+ *
+ * If an error occurs at any step after a call to psa_key_derivation_setup(),
+ * the operation will need to be reset by a call to psa_key_derivation_abort().
+ *
+ * Implementations must reject an attempt to derive a key of size 0.
+ *
+ * \param[in,out] operation The key derivation operation object
+ * to set up. It must
+ * have been initialized but not set up yet.
+ * \param alg The key derivation algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_KEY_DERIVATION(\p alg) is true).
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c alg is not a key derivation algorithm.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \c alg is not supported or is not a key derivation algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be inactive).
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_setup(
+ psa_key_derivation_operation_t *operation,
+ psa_algorithm_t alg);
+
+/** Retrieve the current capacity of a key derivation operation.
+ *
+ * The capacity of a key derivation is the maximum number of bytes that it can
+ * return. When you get *N* bytes of output from a key derivation operation,
+ * this reduces its capacity by *N*.
+ *
+ * \param[in] operation The operation to query.
+ * \param[out] capacity On success, the capacity of the operation.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active).
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_get_capacity(
+ const psa_key_derivation_operation_t *operation,
+ size_t *capacity);
+
+/** Set the maximum capacity of a key derivation operation.
+ *
+ * The capacity of a key derivation operation is the maximum number of bytes
+ * that the key derivation operation can return from this point onwards.
+ *
+ * \param[in,out] operation The key derivation operation object to modify.
+ * \param capacity The new capacity of the operation.
+ * It must be less or equal to the operation's
+ * current capacity.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p capacity is larger than the operation's current capacity.
+ * In this case, the operation object remains valid and its capacity
+ * remains unchanged.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active).
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_set_capacity(
+ psa_key_derivation_operation_t *operation,
+ size_t capacity);
+
+/** Use the maximum possible capacity for a key derivation operation.
+ *
+ * Use this value as the capacity argument when setting up a key derivation
+ * to indicate that the operation should have the maximum possible capacity.
+ * The value of the maximum possible capacity depends on the key derivation
+ * algorithm.
+ */
+#define PSA_KEY_DERIVATION_UNLIMITED_CAPACITY ((size_t)(-1))
+
+/** Provide an input for key derivation or key agreement.
+ *
+ * Which inputs are required and in what order depends on the algorithm.
+ * Refer to the documentation of each key derivation or key agreement
+ * algorithm for information.
+ *
+ * This function passes direct inputs, which is usually correct for
+ * non-secret inputs. To pass a secret input, which should be in a key
+ * object, call psa_key_derivation_input_key() instead of this function.
+ * Refer to the documentation of individual step types
+ * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t)
+ * for more information.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_key_derivation_abort().
+ *
+ * \param[in,out] operation The key derivation operation object to use.
+ * It must have been set up with
+ * psa_key_derivation_setup() and must not
+ * have produced any output yet.
+ * \param step Which step the input data is for.
+ * \param[in] data Input data to use.
+ * \param data_length Size of the \p data buffer in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c step is not compatible with the operation's algorithm.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c step does not allow direct inputs.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid for this input \p step.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_input_bytes(
+ psa_key_derivation_operation_t *operation,
+ psa_key_derivation_step_t step,
+ const uint8_t *data,
+ size_t data_length);
+
+/** Provide an input for key derivation in the form of a key.
+ *
+ * Which inputs are required and in what order depends on the algorithm.
+ * Refer to the documentation of each key derivation or key agreement
+ * algorithm for information.
+ *
+ * This function obtains input from a key object, which is usually correct for
+ * secret inputs or for non-secret personalization strings kept in the key
+ * store. To pass a non-secret parameter which is not in the key store,
+ * call psa_key_derivation_input_bytes() instead of this function.
+ * Refer to the documentation of individual step types
+ * (`PSA_KEY_DERIVATION_INPUT_xxx` values of type ::psa_key_derivation_step_t)
+ * for more information.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_key_derivation_abort().
+ *
+ * \param[in,out] operation The key derivation operation object to use.
+ * It must have been set up with
+ * psa_key_derivation_setup() and must not
+ * have produced any output yet.
+ * \param step Which step the input data is for.
+ * \param key Identifier of the key. It must have an
+ * appropriate type for step and must allow the
+ * usage #PSA_KEY_USAGE_DERIVE.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c step is not compatible with the operation's algorithm.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c step does not allow key inputs of the given type
+ * or does not allow key inputs at all.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid for this input \p step.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_input_key(
+ psa_key_derivation_operation_t *operation,
+ psa_key_derivation_step_t step,
+ psa_key_id_t key);
+
+/** Perform a key agreement and use the shared secret as input to a key
+ * derivation.
+ *
+ * A key agreement algorithm takes two inputs: a private key \p private_key
+ * a public key \p peer_key.
+ * The result of this function is passed as input to a key derivation.
+ * The output of this key derivation can be extracted by reading from the
+ * resulting operation to produce keys and other cryptographic material.
+ *
+ * If this function returns an error status, the operation enters an error
+ * state and must be aborted by calling psa_key_derivation_abort().
+ *
+ * \param[in,out] operation The key derivation operation object to use.
+ * It must have been set up with
+ * psa_key_derivation_setup() with a
+ * key agreement and derivation algorithm
+ * \c alg (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_KEY_AGREEMENT(\c alg) is true
+ * and #PSA_ALG_IS_RAW_KEY_AGREEMENT(\c alg)
+ * is false).
+ * The operation must be ready for an
+ * input of the type given by \p step.
+ * \param step Which step the input data is for.
+ * \param private_key Identifier of the private key to use. It must
+ * allow the usage #PSA_KEY_USAGE_DERIVE.
+ * \param[in] peer_key Public key of the peer. The peer key must be in the
+ * same format that psa_import_key() accepts for the
+ * public key type corresponding to the type of
+ * private_key. That is, this function performs the
+ * equivalent of
+ * #psa_import_key(...,
+ * `peer_key`, `peer_key_length`) where
+ * with key attributes indicating the public key
+ * type corresponding to the type of `private_key`.
+ * For example, for EC keys, this means that peer_key
+ * is interpreted as a point on the curve that the
+ * private key is on. The standard formats for public
+ * keys are documented in the documentation of
+ * psa_export_public_key().
+ * \param peer_key_length Size of \p peer_key in bytes.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid for this key agreement \p step.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c private_key is not compatible with \c alg,
+ * or \p peer_key is not valid for \c alg or not compatible with
+ * \c private_key.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \c alg is not supported or is not a key derivation algorithm.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \c step does not allow an input resulting from a key agreement.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_key_agreement(
+ psa_key_derivation_operation_t *operation,
+ psa_key_derivation_step_t step,
+ psa_key_id_t private_key,
+ const uint8_t *peer_key,
+ size_t peer_key_length);
+
+/** Read some data from a key derivation operation.
+ *
+ * This function calculates output bytes from a key derivation algorithm and
+ * return those bytes.
+ * If you view the key derivation's output as a stream of bytes, this
+ * function destructively reads the requested number of bytes from the
+ * stream.
+ * The operation's capacity decreases by the number of bytes read.
+ *
+ * If this function returns an error status other than
+ * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error
+ * state and must be aborted by calling psa_key_derivation_abort().
+ *
+ * \param[in,out] operation The key derivation operation object to read from.
+ * \param[out] output Buffer where the output will be written.
+ * \param output_length Number of bytes to output.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_INSUFFICIENT_DATA
+ * The operation's capacity was less than
+ * \p output_length bytes. Note that in this case,
+ * no output is written to the output buffer.
+ * The operation's capacity is set to 0, thus
+ * subsequent calls to this function will not
+ * succeed, even with a smaller output buffer.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active and completed
+ * all required input steps).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_output_bytes(
+ psa_key_derivation_operation_t *operation,
+ uint8_t *output,
+ size_t output_length);
+
+/** Derive a key from an ongoing key derivation operation.
+ *
+ * This function calculates output bytes from a key derivation algorithm
+ * and uses those bytes to generate a key deterministically.
+ * The key's location, usage policy, type and size are taken from
+ * \p attributes.
+ *
+ * If you view the key derivation's output as a stream of bytes, this
+ * function destructively reads as many bytes as required from the
+ * stream.
+ * The operation's capacity decreases by the number of bytes read.
+ *
+ * If this function returns an error status other than
+ * #PSA_ERROR_INSUFFICIENT_DATA, the operation enters an error
+ * state and must be aborted by calling psa_key_derivation_abort().
+ *
+ * How much output is produced and consumed from the operation, and how
+ * the key is derived, depends on the key type:
+ *
+ * - For key types for which the key is an arbitrary sequence of bytes
+ * of a given size, this function is functionally equivalent to
+ * calling #psa_key_derivation_output_bytes
+ * and passing the resulting output to #psa_import_key.
+ * However, this function has a security benefit:
+ * if the implementation provides an isolation boundary then
+ * the key material is not exposed outside the isolation boundary.
+ * As a consequence, for these key types, this function always consumes
+ * exactly (\p bits / 8) bytes from the operation.
+ * The following key types defined in this specification follow this scheme:
+ *
+ * - #PSA_KEY_TYPE_AES;
+ * - #PSA_KEY_TYPE_ARC4;
+ * - #PSA_KEY_TYPE_CAMELLIA;
+ * - #PSA_KEY_TYPE_DERIVE;
+ * - #PSA_KEY_TYPE_HMAC.
+ *
+ * - For ECC keys on a Montgomery elliptic curve
+ * (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a
+ * Montgomery curve), this function always draws a byte string whose
+ * length is determined by the curve, and sets the mandatory bits
+ * accordingly. That is:
+ *
+ * - Curve25519 (#PSA_ECC_FAMILY_MONTGOMERY, 255 bits): draw a 32-byte
+ * string and process it as specified in RFC 7748 §5.
+ * - Curve448 (#PSA_ECC_FAMILY_MONTGOMERY, 448 bits): draw a 56-byte
+ * string and process it as specified in RFC 7748 §5.
+ *
+ * - For key types for which the key is represented by a single sequence of
+ * \p bits bits with constraints as to which bit sequences are acceptable,
+ * this function draws a byte string of length (\p bits / 8) bytes rounded
+ * up to the nearest whole number of bytes. If the resulting byte string
+ * is acceptable, it becomes the key, otherwise the drawn bytes are discarded.
+ * This process is repeated until an acceptable byte string is drawn.
+ * The byte string drawn from the operation is interpreted as specified
+ * for the output produced by psa_export_key().
+ * The following key types defined in this specification follow this scheme:
+ *
+ * - #PSA_KEY_TYPE_DES.
+ * Force-set the parity bits, but discard forbidden weak keys.
+ * For 2-key and 3-key triple-DES, the three keys are generated
+ * successively (for example, for 3-key triple-DES,
+ * if the first 8 bytes specify a weak key and the next 8 bytes do not,
+ * discard the first 8 bytes, use the next 8 bytes as the first key,
+ * and continue reading output from the operation to derive the other
+ * two keys).
+ * - Finite-field Diffie-Hellman keys (#PSA_KEY_TYPE_DH_KEY_PAIR(\c group)
+ * where \c group designates any Diffie-Hellman group) and
+ * ECC keys on a Weierstrass elliptic curve
+ * (#PSA_KEY_TYPE_ECC_KEY_PAIR(\c curve) where \c curve designates a
+ * Weierstrass curve).
+ * For these key types, interpret the byte string as integer
+ * in big-endian order. Discard it if it is not in the range
+ * [0, *N* - 2] where *N* is the boundary of the private key domain
+ * (the prime *p* for Diffie-Hellman, the subprime *q* for DSA,
+ * or the order of the curve's base point for ECC).
+ * Add 1 to the resulting integer and use this as the private key *x*.
+ * This method allows compliance to NIST standards, specifically
+ * the methods titled "key-pair generation by testing candidates"
+ * in NIST SP 800-56A §5.6.1.1.4 for Diffie-Hellman,
+ * in FIPS 186-4 §B.1.2 for DSA, and
+ * in NIST SP 800-56A §5.6.1.2.2 or
+ * FIPS 186-4 §B.4.2 for elliptic curve keys.
+ *
+ * - For other key types, including #PSA_KEY_TYPE_RSA_KEY_PAIR,
+ * the way in which the operation output is consumed is
+ * implementation-defined.
+ *
+ * In all cases, the data that is read is discarded from the operation.
+ * The operation's capacity is decreased by the number of bytes read.
+ *
+ * For algorithms that take an input step #PSA_KEY_DERIVATION_INPUT_SECRET,
+ * the input to that step must be provided with psa_key_derivation_input_key().
+ * Future versions of this specification may include additional restrictions
+ * on the derived key based on the attributes and strength of the secret key.
+ *
+ * \param[in] attributes The attributes for the new key.
+ * \param[in,out] operation The key derivation operation object to read from.
+ * \param[out] key On success, an identifier for the newly created
+ * key. For persistent keys, this is the key
+ * identifier defined in \p attributes.
+ * \c 0 on failure.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * If the key is persistent, the key material and the key's metadata
+ * have been saved to persistent storage.
+ * \retval #PSA_ERROR_ALREADY_EXISTS
+ * This is an attempt to create a persistent key, and there is
+ * already a persistent key with the given identifier.
+ * \retval #PSA_ERROR_INSUFFICIENT_DATA
+ * There was not enough data to create the desired key.
+ * Note that in this case, no output is written to the output buffer.
+ * The operation's capacity is set to 0, thus subsequent calls to
+ * this function will not succeed, even with a smaller output buffer.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * The key type or key size is not supported, either by the
+ * implementation in general or in this particular location.
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * The provided key attributes are not valid for the operation.
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * The #PSA_KEY_DERIVATION_INPUT_SECRET input was not provided through
+ * a key.
+ * \retval #PSA_ERROR_BAD_STATE
+ * The operation state is not valid (it must be active and completed
+ * all required input steps).
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_output_key(
+ const psa_key_attributes_t *attributes,
+ psa_key_derivation_operation_t *operation,
+ psa_key_id_t *key);
+
+/** Abort a key derivation operation.
+ *
+ * Aborting an operation frees all associated resources except for the \c
+ * operation structure itself. Once aborted, the operation object can be reused
+ * for another operation by calling psa_key_derivation_setup() again.
+ *
+ * This function may be called at any time after the operation
+ * object has been initialized as described in #psa_key_derivation_operation_t.
+ *
+ * In particular, it is valid to call psa_key_derivation_abort() twice, or to
+ * call psa_key_derivation_abort() on an operation that has not been set up.
+ *
+ * \param[in,out] operation The operation to abort.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_key_derivation_abort(
+ psa_key_derivation_operation_t *operation);
+
+/** Perform a key agreement and return the raw shared secret.
+ *
+ * \warning The raw result of a key agreement algorithm such as finite-field
+ * Diffie-Hellman or elliptic curve Diffie-Hellman has biases and should
+ * not be used directly as key material. It should instead be passed as
+ * input to a key derivation algorithm. To chain a key agreement with
+ * a key derivation, use psa_key_derivation_key_agreement() and other
+ * functions from the key derivation interface.
+ *
+ * \param alg The key agreement algorithm to compute
+ * (\c PSA_ALG_XXX value such that
+ * #PSA_ALG_IS_RAW_KEY_AGREEMENT(\p alg)
+ * is true).
+ * \param private_key Identifier of the private key to use. It must
+ * allow the usage #PSA_KEY_USAGE_DERIVE.
+ * \param[in] peer_key Public key of the peer. It must be
+ * in the same format that psa_import_key()
+ * accepts. The standard formats for public
+ * keys are documented in the documentation
+ * of psa_export_public_key().
+ * \param peer_key_length Size of \p peer_key in bytes.
+ * \param[out] output Buffer where the decrypted message is to
+ * be written.
+ * \param output_size Size of the \c output buffer in bytes.
+ * \param[out] output_length On success, the number of bytes
+ * that make up the returned output.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * \retval #PSA_ERROR_INVALID_HANDLE
+ * \retval #PSA_ERROR_NOT_PERMITTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p alg is not a key agreement algorithm
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \p private_key is not compatible with \p alg,
+ * or \p peer_key is not valid for \p alg or not compatible with
+ * \p private_key.
+ * \retval #PSA_ERROR_BUFFER_TOO_SMALL
+ * \p output_size is too small
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \p alg is not a supported key agreement algorithm.
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_raw_key_agreement(psa_algorithm_t alg,
+ psa_key_id_t private_key,
+ const uint8_t *peer_key,
+ size_t peer_key_length,
+ uint8_t *output,
+ size_t output_size,
+ size_t *output_length);
+
+/**@}*/
+
+/** \defgroup random Random generation
+ * @{
+ */
+
+/**
+ * \brief Generate random bytes.
+ *
+ * \warning This function **can** fail! Callers MUST check the return status
+ * and MUST NOT use the content of the output buffer if the return
+ * status is not #PSA_SUCCESS.
+ *
+ * \note To generate a key, use psa_generate_key() instead.
+ *
+ * \param[out] output Output buffer for the generated data.
+ * \param output_size Number of bytes to generate and output.
+ *
+ * \retval #PSA_SUCCESS
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_generate_random(uint8_t *output,
+ size_t output_size);
+
+/**
+ * \brief Generate a key or key pair.
+ *
+ * The key is generated randomly.
+ * Its location, usage policy, type and size are taken from \p attributes.
+ *
+ * Implementations must reject an attempt to generate a key of size 0.
+ *
+ * The following type-specific considerations apply:
+ * - For RSA keys (#PSA_KEY_TYPE_RSA_KEY_PAIR),
+ * the public exponent is 65537.
+ * The modulus is a product of two probabilistic primes
+ * between 2^{n-1} and 2^n where n is the bit size specified in the
+ * attributes.
+ *
+ * \param[in] attributes The attributes for the new key.
+ * \param[out] key On success, an identifier for the newly created
+ * key. For persistent keys, this is the key
+ * identifier defined in \p attributes.
+ * \c 0 on failure.
+ *
+ * \retval #PSA_SUCCESS
+ * Success.
+ * If the key is persistent, the key material and the key's metadata
+ * have been saved to persistent storage.
+ * \retval #PSA_ERROR_ALREADY_EXISTS
+ * This is an attempt to create a persistent key, and there is
+ * already a persistent key with the given identifier.
+ * \retval #PSA_ERROR_NOT_SUPPORTED
+ * \retval #PSA_ERROR_INVALID_ARGUMENT
+ * \retval #PSA_ERROR_INSUFFICIENT_MEMORY
+ * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY
+ * \retval #PSA_ERROR_COMMUNICATION_FAILURE
+ * \retval #PSA_ERROR_HARDWARE_FAILURE
+ * \retval #PSA_ERROR_CORRUPTION_DETECTED
+ * \retval #PSA_ERROR_INSUFFICIENT_STORAGE
+ * \retval #PSA_ERROR_DATA_INVALID
+ * \retval #PSA_ERROR_DATA_CORRUPT
+ * \retval #PSA_ERROR_STORAGE_FAILURE
+ * \retval #PSA_ERROR_BAD_STATE
+ * The library has not been previously initialized by psa_crypto_init().
+ * It is implementation-dependent whether a failure to initialize
+ * results in this error code.
+ */
+psa_status_t psa_generate_key(const psa_key_attributes_t *attributes,
+ psa_key_id_t *key);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+/* The file "crypto_sizes.h" contains definitions for size calculation
+ * macros whose definitions are implementation-specific. */
+#include "psa/crypto_sizes.h"
+
+/* The file "crypto_client_struct.h" contains definitions for structures
+ * whose definitions differ in the client view and the PSA server
+ * implementation in TF-M. */
+#include "psa/crypto_client_struct.h"
+
+
+/* The file "crypto_struct.h" contains definitions for
+ * implementation-specific structs that are declared above. */
+#include "psa/crypto_struct.h"
+
+/* The file "crypto_extra.h" contains vendor-specific definitions. This
+ * can include vendor-defined algorithms, extra functions, etc. */
+#include "psa/crypto_extra.h"
+
+#endif /* PSA_CRYPTO_H */